Sei sulla pagina 1di 3

Chemfloor PU

Three Component, Self-Leveling, Chemical Resistant Polyurethane Flooring Compound

Product Description Chemfloor PU is a three component polyurethane, self leveling flooring


compound which can be made available in a range of matt colours.
_________________________________________________________________________________
Uses Chemfloor PU has the following uses:
Food processing plants
Chemical processing factories
Pharmaceutical production facilities
Hospitals & Scientific laboratories
Floors subjected to heavy traffic
Industrial floors with movement of loaded trolleys
Floors experiencing continuous wetting and drying cycles
_________________________________________________________________________________
Advantages Chemfloor PU provides the following advantages:
Excellent chemical resistance
High abrasion & impact resistance
Seamless & hygienic floor finish with no depression for dust / bacteria to
collect
Easy to clean & low maintenance requirements
_________________________________________________________________________________
Physical Properties
_________________________________________________________________________________
Colour Pale Grey; other specified colours available on demand
_________________________________________________________________________________
Density 1.90 + 0.02 kg / lit
_________________________________________________________________________________
Pot Life 20 min at 25oC; 10 min at 35oC
_________________________________________________________________________________
Light Traffic (25oC) 24 Hours
_________________________________________________________________________________
Fully Cured (25oC) 07 Days
_________________________________________________________________________________
Coverage (Average) 7.5 kg / m2 at 4 mm thickness
_________________________________________________________________________________
Packaging 30 kg (3-Components kit)
_________________________________________________________________________________
Shelf Life 12 Months when stored under shade in cool environment
_________________________________________________________________________________

1
_________________________________________________________________________________
Technical Data (Dry Applied Product)
_________________________________________________________________________________

Compressive strength approx. 52 MPa


Flexural strength approx. 16 MPa
Tensile strength > 7 MPa
Coefficient of thermal expansion/C 1,4 x 10-5
Bond strength > 4 MPa
Impact resistance >0,5mm
Thermal conductivity 0,85 W / C
Temperature resistance 85 C
Water absorption Nil
_________________________________________________________________________________
Surface Preparation Substrate must be concrete or polymer modified screed above 25 MPa
compressive strength. Heavy sand blasting or scarification should be used to
remove all residues to provide a dry, dust-free open textured surface with
exposed aggregate. Maximum surface moisture at the time of application
should not exceed 4 %.
_________________________________________________________________________________
Priming A priming coat of 2-components (Base & Hardener) of Chemfloor PU is
applied prior to laying the 3-component screed
_________________________________________________________________________________
Mixing Chemfloor PU components are pre-weighed for optimum performance.
Never split or proportion kits. The prescribed aggregate must be used as
supplied and not substituted with an alternative. Mixing in a forced action pan
mixer is recommended. Charge pan with Base component. Add Hardener
component to the Base component and mix for approx. 30 sec until colour is a
uniform cream colour. Add Aggregate component and mix for at least
3 minutes, until the mixture is uniform.
_________________________________________________________________________________
Application Within one minute after mixing, spread the topping onto the primed floor to
the required thickness using a steel bladed trowel or rake set to the correct
depth. Within 3 minutes of application, roll with a spiked roller lay abutting
mixes within 3 minutes of application of previous mix. Maximum bay width
is 5 m.

2
_________________________________________________________________________________
Colours & Variability Variations in aggregates can cause variations in floor colour. Although every
effort is made to keep product colours consistent, it is advisable to use product
from the same batch in specific areas. Products can be pre blended to further
limit colour variations.
_________________________________________________________________________________
Health & Safety When wet, Chemfloor PU is toxic and flammable. Ensure working area is
well ventilated during application and drying. Avoid flames in vicinity. Avoid
inhalation of dust and contact with skin and eyes. Suitable protective clothing,
gloves, eye protection and respiratory protective equipment should be worn.
The use of barrier creams provides additional skin protection. If contact with
skin occurs, wash with water and soap. Splashes into eyes should be washed
immediately with plenty of clean water and medical advice sought. When
cured, Chemfloor PU is inert, non-toxic and non-hazardous.

Potrebbero piacerti anche