Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
INPUT
Notation Description Value Unit
Lifting lug material ASTM A36
Base material ASTM A36
Lifting angle (with respect to vertical) 30
Sl Ultimate tensile strength of filler material 400 MPa
Sy Yield strength of lifting lug material 248 MPa
Syb Yield strength of base material. 248 MPa
45000 Kg
W Total weight of the Tank
441450 N
N Number of lifting lugs 4 Nos.
H Hole diameter 60 mm
ls End radius 125 mm
tl Thickness of lug 50 mm
bl Width of lug at base 250 mm
bw Width of lug at hole diameter 125 mm
La Lever arm for bending moment 70 mm
IV Impact value 2
w' Leg size of the fillet weld at base 10 mm
Swl Allowable shear stress of weld = min ((0.3 x sl ),(0.4xmin(syb,sy)) 99.2 MPa
Slt Allowable tensile stress of lug =0.6*Sy 148.8 MPa
Slb Allowable bending stress for lug =0.66*S y 163.68 MPa
Slb1 Allowable bearing stress for lug =0.75*Sy 186 MPa
SlS Allowable shear stress of lug =0.4*Sy 99.2 MPa
W' Vertical load on each lug = IV x (W/N) 220725 N
IW' Impact load on each lug =W' / cos 254871 N
IW o Horizontal impact load on each lug =W' x tan 127436 N
b Weld length of fillet weld 600 mm
As the stress ratio is less than 1 hence lug is OK in combined ratio check
Shearing of weld = IW' / [ ( b x w' x 0.707 ) ] 60.083 MPa
SSw
Stress ratio = SSw/Swl 0.606
As the stress ratio is less than 1 hence weld is OK in shear check
CONCLUSION :
1) FROM ABOVE CALCULATIONS IT IS CONCLUDED THAT THE DESIGN OF LIFTING LUG IS SAFE.
Compatibility Report for LIFTING LUG CALCS (FRAME).xls
Run on 3/11/2016 12:22
The following features in this workbook are not supported by earlier versions of
Excel. These features may be lost or degraded when opening this workbook in
an earlier version of Excel or if you save this workbook in an earlier file format.
Any effects on this object will be removed. Any text that overflows the 1
boundaries of this graphic will appear clipped.
B-101_103'!A1:AI155
Version
Excel 97-2003