Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
* When referring to publications like NCCLS, IP, BP, USP, ASTM, AOAC etc. kindly mention the clause / chapter / page number, as appropriate.
+ The value at which uncertainty of measurement estimated shall also be specified.
Laboratories performing site testing shall clearly identify the Specific tests on products(s) / material performed at permanent laboratory and / or at site. Refer NABL 130 for
details.
Signature, Date & Name of Lab Signature, Date & Name of Signature, Date & Name of Lead
Representative Assessor(s) Assessor
National Accreditation Board for Testing and Calibration Laboratories
Doc. No: NABL 215 Assessment Forms and Checklist (Based on ISO/IEC 17025: 2005)
Issue No: 05 Issue Date: 02.07.2012 Amend No: 00 Amend Date: - Page No: 1/ 63
FORM 72
2. Aggregate
Sieve Analysis IS : 2386- Part 1-1963,
(Coarse) 150 micron 80mm 1 mm @ 20 mm
(Reaffirmed 2011)
* When referring to publications like NCCLS, IP, BP, USP, ASTM, AOAC etc. kindly mention the clause / chapter / page number, as appropriate.
+ The value at which uncertainty of measurement estimated shall also be specified.
Laboratories performing site testing shall clearly identify the Specific tests on products(s) / material performed at permanent laboratory and / or at site. Refer NABL 130 for
details.
Signature, Date & Name of Lab Signature, Date & Name of Signature, Date & Name of Lead
Representative Assessor(s) Assessor
National Accreditation Board for Testing and Calibration Laboratories
Doc. No: NABL 215 Assessment Forms and Checklist (Based on ISO/IEC 17025: 2005)
Issue No: 05 Issue Date: 02.07.2012 Amend No: 00 Amend Date: - Page No: 1/ 63
FORM 72
3 Aggregate
Sieve Analysis IS : 2386- Part 1-1963,
(Fine) 75 micron 12.5mm 0.4mm @ 4.75mm
(Reaffirmed 2011)
Signature, Date & Name of Lab Signature, Date & Name of Signature, Date & Name of Lead
Representative Assessor(s) Assessor
National Accreditation Board for Testing and Calibration Laboratories
Doc. No: NABL 215 Assessment Forms and Checklist (Based on ISO/IEC 17025: 2005)
Issue No: 05 Issue Date: 02.07.2012 Amend No: 00 Amend Date: - Page No: 1/ 63
FORM 72
1S:516-1959
Setting time 3 hr -12 hr 0.53 hr@ 6hrs
(Reaffirmed 2013)
1S:516-1959
Bleeding 0% - 10% 0.52 %@5%
(Reaffirmed 2013)
1S:516-1959
Water content 5% - 30% 1.42@76.4%
(Reaffirmed 2013)
1S:516-1959 0.42 N/mm2 @
Compressive strength 5 N/mm260 N/mm2
(Reaffirmed 2013) 35.46N/mm2
5 Bitumen IS : 1448-Part-69 : 1969
Flash Point (Reaffirmed 2003) 30 oC 400 oC 1.1oC @ 164.8oC
IS : 1448-Part-69 : 1969
Fire Point (Reaffirmed 2003) 30 oC 400 oC 1.4oC @ 260.8oC
IS : 1205-1978 1.6 oC
Softening Point 40 oC - 85 oC
(Reaffirmed 2004) @ 47.4 oC
6 Asphalt Mix Binder content ASTM- D 2172 2 - 12% 0.3 % at 5.4%
7 Soil Liquid Limit IS 2720 (Part 5) 1985
10 to 50 % 1.0% at 23.14 %
Reaffirmed 2011
Plastic Limit IS 2720 (Part 5) 1985
10 to 40 % 0.2% at 19.92 %
Reaffirmed 2011
Specific Gravity IS 2720 (Part 3) 1980 1 to 3.0 0.01 at 3
second revision
Reaffirmed 2011
* When referring to publications like NCCLS, IP, BP, USP, ASTM, AOAC etc. kindly mention the clause / chapter / page number, as appropriate.
+ The value at which uncertainty of measurement estimated shall also be specified.
Laboratories performing site testing shall clearly identify the Specific tests on products(s) / material performed at permanent laboratory and / or at site. Refer NABL 130 for
details.
Signature, Date & Name of Lab Signature, Date & Name of Signature, Date & Name of Lead
Representative Assessor(s) Assessor
National Accreditation Board for Testing and Calibration Laboratories
Doc. No: NABL 215 Assessment Forms and Checklist (Based on ISO/IEC 17025: 2005)
Issue No: 05 Issue Date: 02.07.2012 Amend No: 00 Amend Date: - Page No: 1/ 63
FORM 72
* When referring to publications like NCCLS, IP, BP, USP, ASTM, AOAC etc. kindly mention the clause / chapter / page number, as appropriate.
+ The value at which uncertainty of measurement estimated shall also be specified.
Laboratories performing site testing shall clearly identify the Specific tests on products(s) / material performed at permanent laboratory and / or at site. Refer NABL 130 for
details.
Signature, Date & Name of Lab Signature, Date & Name of Signature, Date & Name of Lead
Representative Assessor(s) Assessor
National Accreditation Board for Testing and Calibration Laboratories
Doc. No: NABL 215 Assessment Forms and Checklist (Based on ISO/IEC 17025: 2005)
Issue No: 05 Issue Date: 02.07.2012 Amend No: 00 Amend Date: - Page No: 1/ 63
FORM 72
IS : 1727-1967
Specific gravity 13 0.14@2.14
(Reaffirmed 2008)
10 Bricks
IS : 3495 -1992
Water absorption 1% - 20% 1.25 %@12.16%
(Reaffirmed 2007)
* When referring to publications like NCCLS, IP, BP, USP, ASTM, AOAC etc. kindly mention the clause / chapter / page number, as appropriate.
+ The value at which uncertainty of measurement estimated shall also be specified.
Laboratories performing site testing shall clearly identify the Specific tests on products(s) / material performed at permanent laboratory and / or at site. Refer NABL 130 for
details.
Signature, Date & Name of Lab Signature, Date & Name of Signature, Date & Name of Lead
Representative Assessor(s) Assessor
National Accreditation Board for Testing and Calibration Laboratories
Doc. No: NABL 215 Assessment Forms and Checklist (Based on ISO/IEC 17025: 2005)
Issue No: 05 Issue Date: 02.07.2012 Amend No: 00 Amend Date: - Page No: 1/ 63
FORM 72
11 Concrete
IS : 516-1959 5 N/mm2 - 2.08 N/mm2
Cube Compressive Strength
(Reaffirmed 2008) 80 N/mm2 @23.25N/mm2
Workability by Slump Test IS: 1199-1959, RA 2004 Upto 250 mm 2.03 mm @ 100
mm
* When referring to publications like NCCLS, IP, BP, USP, ASTM, AOAC etc. kindly mention the clause / chapter / page number, as appropriate.
+ The value at which uncertainty of measurement estimated shall also be specified.
Laboratories performing site testing shall clearly identify the Specific tests on products(s) / material performed at permanent laboratory and / or at site. Refer NABL 130 for
details.
Signature, Date & Name of Lab Signature, Date & Name of Signature, Date & Name of Lead
Representative Assessor(s) Assessor
National Accreditation Board for Testing and Calibration Laboratories
Doc. No: NABL 215 Assessment Forms and Checklist (Based on ISO/IEC 17025: 2005)
Issue No: 05 Issue Date: 02.07.2012 Amend No: 00 Amend Date: - Page No: 1/ 63