Sei sulla pagina 1di 2

DKD calibration

of Torque
DKD-K-09301

Torque calibration service from 0.01 Nm to 20,000 Nm


Calibration of transducers, measurement chains and torque wrenches
On-site calibration service on demand
Internationally acknowledged DKD calibration certificate
Accredited measurement uncertainty as low as 0.01%

Application Description
Traceability of measuring equipment used in processes is an important The reference standard instrument (BNME 1 kNm) generates a
quality element for ensuring that all measured values correspond to defined torque using lever arms (2 1019.239 mm 0.005 mm)
the actual physical units. For measured units falling within the scope suspended from a zero-friction aerostatic bearing and masses
of the German Eichgesetz (standardization and calibration act), this is composed of 120 mass discs with class F1 (0.0005%). In-house
administered by the Eichamt (office of weights and measures). For calibrations are performed in our climate-controlled laboratories
scientific and technical units, such as force and torque, this is handled (22C 0.3 C, 45% 5% relative humidity).
by the Deutscher Kalibrier Dienst (DKD) (German National Calibration On-site calibrations are performed using suitable reference
Agency). standards.
This internationally recognized calibration certificate is becoming
increasingly important, since it provides the only means to
demonstrate traceability to national or international standards.

SCHATZ AG Tel. +49 (0)2191/698-0 www.schatz.ag EQS 8010_e


Postfach 11 06 69 Fax +49 (0)2191/60023 info@schatz-mail.de 0807_1
D-42866 Remscheid subject to techn. alterations
DKD calibration
for torque
DKD-K-09301
Item Measured quantity or Measurement Measurement Smallest Comments
item to be calibrated range conditions possible relative
measurement
uncertainty
Torque In accordance
with the
following
procedure
directives
and/or device
standards
1 Torque transducers and 0.01 Nm to <1 Nm DIN 51309 0.40 %
torque measurement 1 Nm to 1 k Nm and/or 0.01 %
chains >1 k Nm to 20 k Nm DKD-R- 3-5 0.20 %
EA-10/14
2 Torque calibrators 1 Nm to 1 k Nm DIN 51309 0.10 %
>1 k Nm to 20 k Nm EA-04/15 0.40 %
(formerly EAL-
G22)
3 Reference 1 Nm to 1 k Nm DKD-R 3-7 0.02 % Including electronic precision
torque wrenches >1 k Nm to 20 k Nm 0.20 % torque wrenches

4 Torque wrench calibrators 1 Nm to 1 k Nm DKD-R 3-8 0.20 % For any desired orientation of
the measurement axis
5 Manual torque tools 0.01 Nm to <1 Nm DIN EN ISO 6789 1.00 % Torque wrenches and torque
1 Nm to <5 Nm 0.40 % screwdrivers
5 Nm to 1 k Nm 0.20 %

Traceability of measurements to the national standard of the


Physikalisch Technische Bundesanstalt (PTB) must be ensured.
National standard Measurement devices at the same classification level cannot be
calibrated against each other.
Service measurement equipment is calibrated using plant
DKD level standards. Plant standards must in turn be calibrated using DKD
standards or DKD transfer standards in order to ensure
traceability.
SCHATZ has the calibration equipment and certifications
Factory level necessary for performing DKD calibrations in house in their own
facilities and on site in customer facilities.

User level

SCHATZ AG Tel. +49 (0)2191/698-0 www.schatz.ag EQS 8010_e


Postfach 11 06 69 Fax +49 (0)2191/60023 info@schatz-mail.de 0807_1
D-42866 Remscheid subject to techn. alterations

Potrebbero piacerti anche