Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PREFACE
The descriptions in the Preface are revised to cope with 2012 Edition.
TABLE OF CONTENTS
A3.11 Add Label Schedule and Chinese Translation
LPG_GS 2012
Page 1 of 10 LPGGS_changes
Old Ref. No. New Ref. No. Major Changes
A3.6 A3.6 Delete Annex 3.1 and 3.2
A3.11 Add a new requirement on Label Schedule and Chinese Translation as below :
The Contractor shall submit a schedule for all labels, notices, identifications and instructions for the
Architects approval prior to order and installation. The information of the schedule shall include the
description of the items, height and font type of the text, dimensions of the labels and material used. The
Chinese translations shall be referred to the Glossaries of Terms Commonly Used in Government
Departments issued by the Civil Service Bureau.
LPG_GS 2012
Page 2 of 10 LPGGS_changes
Old Ref. No. New Ref. No. Major Changes
B1.5 B1.5 Replace API 607:1993 by ANSI/API Std 607:2010
SECTION B3 - VAPORISERS
B3.1 B3.1 Replace BS EN 50018:2000 by BS EN 60079-1:2004
LPG_GS 2012
Page 3 of 10 LPGGS_changes
Old Ref. No. New Ref. No. Major Changes
B4.5 B4.5 Replace ANSI B 16.5 by ANSI/ASME B 16.5-2009
LPG_GS 2012
Page 4 of 10 LPGGS_changes
Old Ref. No. New Ref. No. Major Changes
B7.1 B7.1 Replace New Cable Colour Code for Fixed Electrical Installations : Installation Guidelines by the
requirements on Cable Colour Code for Fixed Electrical Installations specified in the Code of Practice for
the Electricity (Wiring) Regulations
SECTION B8 - MISCELLANEOUS
B8.4 B8.4 Replace Buildings by Building
C1.13 C1.13 Replace BS 5386 Part 3:1980 by BS EN 30-1-2:1999, BS EN 30-1-3:2003 and BS EN 30-2-2:1999
LPG_GS 2012
Page 5 of 10 LPGGS_changes
Old Ref. No. New Ref. No. Major Changes
D1.4 D1.4 Replace . with ;. Add and before last bullet points.
LPG_GS 2012
Page 6 of 10 LPGGS_changes
ANNEX
ANSI API Std 607:2010 Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats
ANSI/ASME B 16.5-2009 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard
ASTM A 395/A 395M-99:2009 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at
Elevated Temperatures
ASTM A 47/A 47M-99:2009 Standard Specification for Ferritic Malleable Iron Castings
ASTM A 53/A 53M-10:2010 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
BS EN 30-1-2:1999 Domestic cooking appliances burning gas. Safety. Appliances having forced-convection ovens and/or grills
BS EN 30-1-3:2003 Domestic cooking appliances burning gas. Safety. Appliances having a glass ceramic hotplate
BS EN 30-2-2:1999 Domestic cooking appliances burning gas. Rational use of energy. Appliances having forced-convection
ovens and/or grills.
LPG_GS 2012
Page 7 of 10 LPGGS_changes
BS 4652:1995 Specification for zinc-rich priming paint (organic media)
BS 5440-1:2008 Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family
gases). Specification for installation of gas appliances to chimneys and for maintenance of chimneys.
BS 6956-1:1988 Jointing materials and compounds. Specification for corrugated metal joint rings
BS 6956-5:1992 Jointing materials and compounds. Specification for jointing compounds for use with water, low pressure
saturated steam, 1st family gases (excluding coal gas) and 2nd family gases
BS 7977-1:2009 Specification for safety and rational use of energy of domestic gas appliances. Radiant / convectors.
BS EN 1057:2006 Copper and copper alloys Seamless, round copper tubes for water and gas in sanitary and heating
applications
BS EN 1092-1:2007 Flanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated -
Part 1: Steel Flanges
BS EN 1254-2:1998 Copper and copper alloys Plumbing Fittings Part 2: Fittings with compression ends for use with copper
tubes
BS EN 12864:2001 + A3:2009 Low-Pressure Non Adjustable Regulators Having a Maximum Outlet Pressure of Less Than or Equal to
200 mbar, with a Capacity of Less Than or Equal to 4 kg/h, and Their Associated Safety Devices for Their
Mixtures
LPG_GS 2012
Page 8 of 10 LPGGS_changes
BS EN ISO 17638:2009 Non-destructive testing of welds. Magnetic particle testing
BS EN ISO 23278:2009 Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
BS EN 13785:2005 + A1:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of
up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for
butane, propane or their mixtures
BS EN 13786:2004 + A1:2008 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with
a capacity of up to and including 100 kg/h
BS EN 60079-1:2004 Electrical apparatus for explosive gas atmospheres. Flameproof enclosures 'd'
BS EN 60079-14: 2008 Explosive atmospheres. Electrical installations design, selection and erection
BS EN 751-2:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water.
Non-hardening jointing compounds
ISO 65: 1981 Carbon Steel Tubes Suitable for Screwing in Accordance with ISO 7/1
JIS S 2109: 2008/ Amendment Gas burning water heaters for domestic use
2:2010
PD 5500:2009 + A2:2010 Specification for Unfired fusion welded pressure vessels
LPG_GS 2012
Page 9 of 10 LPGGS_changes
BS 1710:1984 Specification for identification of pipelines and services
LPG_GS 2012
Page 10 of 10 LPGGS_changes