Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The Acoustic Research Portable Wireless Speaker with 3.5mm jack lets you enjoy your music In
anywhere, at home or on the go, with two ways to connect to your music. The 900MHz wireless
transmitter gives you 150ft* of room to roam from your audio source, great for outdoor
entertaining at home, with crystal-clear wireless audio. The speakers 3.5mm jack offers
a convenient connection option to use anywhere you gojust connect your MP3 player or
smartphone to the speaker, and enjoy!
3.5
This manual covers various connection options and detailed operating instructions for making
the AR Wireless Speaker System a valued part of your lifestyle. If, after having reviewed the
PORTABLE instructions, you have any questions, please call toll-free 1-800-732-6866 or visit
www.acoustic-research.com.
AC Power Adapters
3.5mm audio in cable 1. Insert the small, round plug from the speaker AC
ng power adapter into the DC IN jack on the bottom of
Note: These power units should be the speaker.
plugged in so that they stay vertical
2. Plug the other end of the speaker AC power adapter
ehb_[Wj$
into any standard 120V AC wall outlet.
Connecting the Speaker System Note: Be sure to use the speaker AC power adapter rated 9V DC 1200 mA.
Warning: This product is water-resistant, not waterproof. Avoid prolonged exposure to wet
environments, such as rain, mist, dew, etc. In other words, you can take it out, just dont leave it out.
Powering the Transmitter To avoid electrical shock, use this product with caution near water sources if powered with the
Connect the small, round plug from the transmitter AC AC adapter. Never submerge in water.
power adapter to the transmitters DC IN jack. Plug the
other end of the transmitter AC power adapter into any
AA Batteries
standard 120V AC wall outlet. 1. Remove the battery compartment cover on the bottom of the speaker.
Z 2. Insert six (6) AA batteries (not included) into the speaker following the polarity (+ and -)
Note: Be sure to use the AC power adapter rated 12V DC as diagrammed inside the battery compartment.
200 mA (it has the smaller diameter plug).
3. Replace the battery compartment cover on the bottom of the speaker.
Note: Place the rubber cap in the speaker power input jack when using batteries.
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged
DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline
in and powered at all times. If you will not be using the AWS53 for an extended period of time,
battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when
unplug the transmitter AC power adapter.
not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or
dispose of them in accordance with local and national regulations.
a) Monaural operation: The monaural mode (mono) is recommended when using a single
AWS53 by itself. For monaural operation, set the L/M/R switch to M on each speaker.
Troubleshooting Ind
This
two
b) Stereo operation: You need an additional AWS53 speaker for the stereo option. Set the The following troubleshooting guide takes you through some of the more common problems inclu
L/M/R switch to L on the speaker located to the left from the listener, and set the other associated with the installation and/or operation of a wireless system. If the problem persists, This
speaker to the R position. please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com. IC R
unco
Notes: Issue: Cause and solution:
The speaker automatically retunes if it loses the transmitters signal. You can also press the
No sound 9^[Yaj^Wjj^[jhWdic_jj[h79fem[hWZWfj[h_i\kbbo_di[hj[Z_djej^[mWbbekjb[jWdZ
AutoScan button on the back of the speaker to retune the speaker at any time.
j^[fem[hYehZ\hecj^[79WZWfj[h_ihcboYedd[Yj[Zjej^[jhWdic_jj[hfem[h
The transmitter turns off automatically if there is no audio signal present for a prolonged period. input jack.
Interference in the form of static and/or distortion can sometimes be heard. If this occurs, 9edhcj^Wjj^[if[Wa[h_ijkhd[ZedWdZjkd[Zjej^[jhWdic_jj[h
R^]
a\cWTcaP]b\XccTab_TPZTaPSYdbc\T]cbP]SX]SXRPc^ab8UcWT_a^Q[T\_TabXbcbaTUTac^cWT the indicator light on the front of the speaker should be solid blue (not blinking).
Troubleshooting section of this manual. ?\oekh[ki_d]j^[fem[hWZWfj[hi"Yedhcj^WjXej^\ehj^[if[Wa[hWdZ\ehj^[
transmitter) are fully inserted into their wall outlets and the adapter power cords are
hcboYedd[Yj[Zjej^[fem[h_dfkj`WYaiedj^[jhWdic_jj[hehif[Wa[h$
Turning the Speaker Off or
?\oekh[ki_d]XWjj[h_[i\ehj^[if[Wa[h"Y^[Yaj^Wjj^[oWh[\h[i^WdZ_di[hj[Zm_j^
correct polarity (+, ).
1. Press Power button on the back of the speaker to turn the speaker off. 9^[Yaj^Wjj^[WkZ_eiekhY[Yecfed[djij[h[e"CF)fbWo[h"[jY$_ijkhd[ZedWdZ
transmitting sound as it normally should.
($ 9edhcj^Wjj^[if[Wa[h_ie\\Xol[h_\o_d]j^Wjj^[_dZ_YWjehb_]^jedj^[if[Wa[hi\hedj CWa[ikh[j^[lebkc[edoekhWkZ_eiekhY[_ijkhd[Zkf$
panel is no longer illuminated.
9^[Yaj^Wjj^[if[Wa[hlebkc[_ijkhd[Zkf$
?\oekWh[ki_d]WJWf[(Ced_jehekjfkj\hecoekhh[Y[_l[h%WcfWij^[WkZ_e
output, check that you have pressed the Tape Monitor/Tape 2 button on the front of
the receiver. This will turn on the Tape 2 outputs, which may not have been active.
<99H[]kbWj_ediijWj[j^WjkdWkj^eh_p[ZY^Wd][iehceZ_YWj_edijej^_i[gk_fc[djcWole_Zj^[ki[hi CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 16, Mississauga Ontario L5T
authority to operate it. 3A5
dZ
re
^
of
]
he
i