Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BXA-185063/12CF __ FP
Mechanical specifications When ordering replace ___ with connector type.
-160 -20
Electrical specifications
-150 -30
-160 -20
-170 -10
Frequency Range 1850-1990 MHz
180 35 30 25 20 15 10 5 0
Impedance 50
170 10
3)
Connector(s) NE or E-DIN 160 20
2 ports / center 150 30
1)
VSWR 1.4:1 140 40
130 50
Polarization Slant 45 120
110 70
60
100 90 80
1)
Isolation Between Ports < -30 dB
1)
Vertical
Gain 20.5 dBi
2)
Power Rating 250 W The BXA-185063/12CF _ FP can be used in a 3-Antenna Array with the
1)
Half Power Angle following specifications:
H-Plane 60 Outside Diameter of Mounting Pipe Inside Diameter of Concealment Radome
E-Plane 5 63.5 mm 2.5 in 457.2 mm 18 in
1)
Electrical Downtilt 0
88.9 mm 3.5 in 482.6 mm 19 in
1)
Null Fill 5%
101.6 mm 4.0 in 495.3 mm 19.5 in
Lightning Protection Direct Ground
1) Radiation patterns for all antennas are
Electrical Downtilt 0 measured with the antenna mounted on
1) a fiberglass pole.
Null Fill 5% This Amphenol Antel antenna is under a five-
Lightning Protection Direct Ground Mounting on a metal pole will typically year limited warranty for repair or replacement.
improve the Front-to-Back ratio.
Antenna available with center-fed
connectors only.
Patented Dipole Design: U.S. Patent No. 6,597,324 B2
1) Typical values. CF Denotes a Center-Fed
2) Power rating limited by connector only.
3) NE indicates an elongated N connector.
Connector.
E-DIN indicates an elongated DIN connector.
1850-1990 MHz
4) The antenna weight listed above does not include
the bracket weight.
Improvements to mechanical and/or electrical performance
of the antenna may be made without notice.
Amphenol Antel, Inc. 1300 Capital Drive Rockford, Illinois 61109 USA Tel. (815) 399-0001 Revision Date: 8/2/07
Toll-Free (888) 417-9562 Fax. (815) 399-0156 antel@antelinc.com www.antelinc.com