Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
KnowledgeSearch
Password
How to configure Shrew Soft VPN client to work with ScreenOS firewalls Login
SUMMARY:
This article provides information on how to configure the Shrew Soft VPN client to work with ScreenOS firewalls.
Back to Answers
For VPN setup on the firewall, refer to KB14878 - Configure ScreenOS Firewall for use with a VPN Client using Pre-
shared Keys (ScreenOS 6.0 and later) (ScreenOS 6.x) or KB6233 - Configure NetScreen-Remote VPN Client with Printer Friendly
Pre-shared Keys (ScreenOS 5.x).
PR Search
For policy based VPN setup using a single IKE ID with XAuth, refer to KB14883 - How To: Create Multiple Dial Up Create a Support Case
VPN using same IKE ID (ScreenOS 6.0 and later) (ScreenOS 6.x) or KB6623 - How To: Create Multiple Dial Up VPN
using same IKE ID (ScreenOS 5.x). All Security Advisories
For route based VPN setup using a single IKE ID with XAuth, refer to KB15272 - How To: Create Route based Dial Knowledge Center Feedback
Up VPN using same IKE ID (ScreenOS 6.0 and later) (ScreenOS 6.x). Report a Security Vulnerability
SYMPTOMS:
Configure the Shrew Soft VPN client to work with ScreenOS firewalls.
CAUSE:
SOLUTION:
1. Open the Shrew Soft VPN Access Manager.
3. General tab:
c. Address Method - Use an existing adapter and current address (or 'Use a virtual adapter and assigned
address' if using IP Pools; also select the 'Obtain Automatically' option).
4. Client tab:
a. Enable WINS - uncheck (unless you are using XAuth with IP Pools and WINS).
b. Enable DNS - uncheck (unless you are using XAuth with IP Pools and DNS).
6. Authentication tab:
a. Authentication Method - Mutual PSK (or "Mutual PSK + XAuth" if using XAuth).
c. Credentials tab:
7. Phase 1 tab:
b. DH Exchange - group 2.
8. Phase 2 tab:
9. Policy tab:
d. Click Add:
i. Type - Include.
13. When the next dialog box is displayed, click Connect (or enter your XAuth username\password if using XAuth):
If the client connects successfully, the connect button will change to disconnect and the windows will display
tunnel enabled:
If you have followed the above procedure and now require help in troubleshooting, refer to the VPN Configuration and
Troubleshooting Guide.
PURPOSE:
Configuration
Interoperability
RELATED LINKS:
About Juniper Resources Community Support Follow Us
Site Map / RSS Feeds / Careers / Accessibility / Feedback / Privacy & Policy / Legal Notices Copyright 1999-2012 Juniper Networks, Inc. All rights reserved.