Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1 SCOPE
This document lists the underground cables and cable accessories which are Approved for
connection to the SP Distribution ltd, SP Manweb plc and SP Transmission ltd networks. The
categories of equipment covered by this document include the following:-
Cables.
Jointing & Terminating Accessories and consumables.
Ducts, Warning Tapes and Tiles.
Users should always ensure that they are referring to the latest issue of this document.
2 ISSUE RECORD
This is a Controlled document. The current version is held on the Energy Networks Intranet
Document Library.
It is your responsibility to ensure you work to the current version.
Issue Date Issue No Author Amendment Details
February 2011 Issue 7 Clark Sherry Reviewed and updated to include new
equipment.
March 2012 Issue 8 Clark Sherry Change to 33kV joint part numbers,
and General Updates
March 2012 Issue 9 Clark Sherry Correction to 33kV joint part numbers
July 2013 Issue 10 Clark sherry Updated to include new equipment and
remove obsolete equipment and also
to reflect new LV joints and
terminations.
December 2014 Issue 11 Gordon MacKenzie Removal of Radius supplied cable
ducting.
3 ISSUE AUTHORITY
4 REVIEW
This is a Controlled document and shall be reviewed in 5 years from the last issue date or as required
by Approval of new equipment and materials or as items are removed from the Approved list.
DISTRIBUTION
This document is part of the SP Distribution & SP Manweb System Design Virtual Manuals but does
not have a maintained distribution list. It is also published to the Internet.
CONTENTS
1 SCOPE ........................................................................................................................................... 1
2 ISSUE RECORD ............................................................................................................................ 1
3 ISSUE AUTHORITY ....................................................................................................................... 1
4 REVIEW ......................................................................................................................................... 2
DISTRIBUTION ....................................................................................................................................... 2
5 REFERENCES ............................................................................................................................... 5
5.1 POWERSYSTEMS TECHNICAL SPECIFICATIONS .......................................................................... 5
5.2 POWERSYSTEMS DRAWINGS .................................................................................................... 5
5.3 BRITISH STANDARDS (BS) ........................................................................................................ 6
5.4 ELECTRICITY ASSOCIATION TECHNICAL SPECIFICATIONS (EATS) ............................................... 6
5.5 ELECTRICITY ASSOCIATION ENGINEERING RECOMMENDATIONS (ER) ......................................... 6
5.6 INTERNATIONAL ELECTROTECHNICAL COMMISSION .................................................................... 6
5.7 CENELEC .............................................................................................................................. 6
6 GLOSSARY ................................................................................................................................... 7
7 EQUIPMENT APPROVAL CATEGORIES .................................................................................... 8
8 STANDARD REQUIREMENTS ..................................................................................................... 8
8.1 33KV, 11KV, LOW VOLTAGE, MULTICORE AND MULTIPAIR CABLES............................................. 8
8.2 PLASTIC DUCTS FOR UNDERGROUND CABLES ........................................................................... 8
8.3 PLASTIC WARNING TAPES AND TILES.......................................................................................... 8
8.4 11KV AND 33KV JOINT AND TERMINATION KITS.......................................................................... 8
8.5 LV JOINT AND TERMINATION KITS .............................................................................................. 8
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-29.8
8.6 GENERAL W IRING CABLES........................................................................................................ 9
9 APPROVED DUCTS, WARNING TAPES AND TILES ............................................................... 13
9.1 PLASTIC DUCTS & ACCESSORIES FOR UNDERGROUND CABLE ................................................. 13
9.1.1 The following list of Approved plastic ducts and associated accessories are all
manufactured and supplied by Emtelle ........................................................................................ 13
9.2 DUCT SEALING SYSTEMS ....................................................................................................... 16
5 REFERENCES
6 GLOSSARY
For the purpose of this Specification the following definitions shall apply: -
The Company Refers to SP Distribution Ltd, SP Transmission Ltd and SP Manweb plc.
SP Distribution The Distribution Licence Holder for the distribution service area formerly
known as ScottishPower.
SP Transmission The Transmission Licence Holder for the transmission service area formerly
known as ScottishPower.
SP Manweb plc The Distribution Licence Holder for the distribution service area formerly
known as Manweb.
Energy Networks The brand name for the division of ScottishPower group of Companies that
encompasses SP Distribution Ltd, SP Transmission Ltd, SP Manweb plc and
SP Power Systems Ltd.
The Engineer The Energy Networks nominated representative having authority over
technical matters contained in this specification.
Approved Equipment approved in accordance with the Energy Networks Equipment
Approvals Procedure and which is considered suitable for installation on The
Companys networks.
The Tenderer The supplier invited to submit a tender in accordance with this specification.
PILC Paper Insulated Lead Covered cable.
PICAS Paper Insulated Corrugated Aluminium Sheathed cable.
XLPE Cross-Linked Polyethylene
LSOH Low Smoke Zero Halogen sheathed cable
MDPE Medium Density Polyethylene
HDPE High Density Polyethylene
PE Polyethylene
SAC Solid Aluminium Conductor
N/E Neutral Earth
CNE Combined Neutral Earth
SNE Separate Neutral and Earth
Cables and cable accessories listed in the Approved Equipment Register may, where appropriate,
have been assigned particular Approval categories. The categories are defined below:
Category S Category S equipment is that for which approval has been granted only for a specific
contract or site.
Category A Category A equipment is that which is fully Approved for use on the SP Distribution ltd,
SP Manweb plc and SP Transmission ltd networks.
Where no approval category is indicated in the attached tables then Category A approval may be
assumed.
8 STANDARD REQUIREMENTS
Only equipment listed as Approved in the Appendices to this document may be installed on the
Companys networks. Items not listed in the Appendices may be considered for Approval by the
Company, however, the Approval process may take some time and a charge for this work may be
made.
8.1 33kV, 11kV, Low Voltage, Multicore and Multipair Cables
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-020.
8.2 Plastic Ducts for Underground Cables
Shall comply with the requirements of in SP Energy Networks Technical Specification CAB-03-028.
8.3 Plastic warning tapes and tiles
Shall comply as appropriate with the requirements of EATS 12-23.
8.4 11kV and 33kV Joint and Termination kits
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-27.
8.5 LV Joint and Termination kits
Shall comply with the requirements of SP Energy Networks Technical Specification CAB-03-29.
30980895 9667 (9677) 90mm ID ducting suitable for trenchless installation (110mm OD SDR 11) Red Class 1 100m Coils
30980905 9667S 90mm ID ducting suitable for trenchless installation (110mm OD SDR 11) Red Class 1 50m Coils
30980894 9678 110mm ID ducting suitable for trenchless installation (125mm OD SDR 11) Red Class 1 100m coils
30980906 9678S 110mm ID ducting suitable for trenchless installation (125mm OD SDR 11) Red Class 1 50m Coils
30980893 9679 125mm ID ducting suitable for trenchless installation (160mm OD SDR 11) Red Class 1 100m coils
30980907 9679S 125mm ID ducting suitable for trenchless installation (160mm OD SDR 11) Red Class 1 50m Coils
30980903 9680 180mm ID ducting suitable for trenchless installation (200mm OD SDR 11) Red Class 1 100m coils
30980909 9680S 180mm ID ducting suitable for trenchless installation (200mm OD SDR 11) Red Class 1 50m Coils
30980892 9681 147mm ID ducting suitable for trenchless installation (180mm OD SDR 11) Red Class 1 100m coils
30980908 9681S 147mm ID ducting suitable for trenchless installation (180mm OD SDR 11) Red Class 1 50m coils
30982914 9494 PVC CABLE GUARD 3M X 25MM N/A 3m
Emtelle Resistance To
SAP Number Scottish Power Description Length
Product Code Deformation
30982915 9495 PVC CABLE GUARD 3M X 55MM N/A 3m
30982916 9496 PVC CABLE GUARD 3M X 80MM N/A 3m
30982913 TBA PVC CABLE GUARD 3M X 40MM N/A 3m
30980884 20046 100mm ID straight duct, single socket end (110mm OD uPVC Duct) Red Class 1 3m effective length
30025594 5302 100mm ID straight duct, single socket end (110mm OD uPVC Duct) Red Class 1 6m effective length
30980888 20047 100mm ID straight duct, single socket end (110mm OD uPVC Duct) Red Class 2 3m effective length
30980885 5303S 150mm ID straight duct, single socket end (160mm OD uPVC Duct) Red Class 1 3m effective length
30025593 5303 150mm ID straight duct, single socket end (160mm OD uPVC Duct) Red Class 1 6.6m effective length
30980889 20048 150mm ID straight duct, single socket end (160mm OD uPVC Duct) Red Class 2 3m effective length
30980883 5077 House service hockeystick c/w intregral socket to suit 32mm duct (38mm OD) Red Class 2 N/A
30980886 5236 Duct Couplers as required. PVC cable duct coupler 100mm ID straight duct Red N/A N/A
30980887 5235 Duct Couplers as required. PVC cable duct coupler 150mm ID straight duct Red N/A N/A
30980882 5581 Duct Couplers as required. PVC cable duct 32mm Red N/A N/A
30980896 20049 100mm ID x 11.25 Degree bend 1200 radius Red Class 1 N/A
30980897 20050 100mm ID x 22.5 Degree bend 1200 radius Red Class 1 N/A
30980900 20051 100mm ID x 45 Degree bend 1200 radius Red Class 1 N/A
30980367 20052 100mm ID 90 x Degree bend 1200 radius Red Class 1 N/A
30980899 5452U 150mm ID x 11.25 Degree bend 1200 radius Red Class 1 N/A
30980898 5453U 150mm ID x 22.5 Degree bend 1200 radius Red Class 1 N/A
30980901 5454U 150mm ID x 45 Degree bend 1200 radius Red Class 1 N/A
30980902 5455U 150mm ID x 90 Degree bend 1200 radius Red Class 1 N/A
Emtelle Resistance To
SAP Number Scottish Power Description Length
Product Code Deformation
30980880 9710 (5862) Bend 90 Deg PVC Duct 50mm 250mm radius (3 phase service cables only) Class 1 N/A
30025765 TBA 100mm ID x 90 Degree bend 450mm radius (For building entry only) N/A N/A
30025766 TBA 150mm ID x 90 Degree bend 560mm radius(For building entry only) N/A N/A
30025566 4156 Green Opticom 110mm OD straight duct, 4 pre-installed sub ducts N/A 6.6m effective length
30025570 2147 Opticom Green 110mm duct + 4 fibre sub ducts 11.25 deg bend Class 1 N/A
30025569 2145 Opticom Green 110mm duct + 4 fibre sub ducts 22.5 deg bend Class 1 N/A
30025568 3340 Opticom Green 110mm duct + 4 fibre sub ducts flexible bend Class 1 N/A
2469900 2609 Rope blowing gun for Opticom N/A N/A
TBA 3218 TYPE B TERMINATOR N/A N/A
TBA 3613 OPTICOM REPAIR KIT N/A N/A
30025566 5730 Opticom Green 110mm duct + 4 fibre sub ducts x 6.6m SP Manweb printing Class 1 6.6m, MoQ 524m
30025565 5715 110mm Duct, No subduct Class 1 6m MoQ 540
TBA 3818 GREEN 110MM 11.25 DEG BEND Class 1 N/A
TBA 3817 GREEN 110MM 22.5 DEG BEND Class 1 N/A
2
30980258 + 3 x 1-core XLPE 150mm to 3-core PILC 33-014 CATJ-36D/1XU- Use kit SMOE-64171 (30025688)
30025688 0.1 sq inch Cu H type trifurcating joint 3SB-GB02 Contains smaller tubes and connectors
for small PILC cable
2 2
30980258 3 x 1-core XLPE 150mm -240mm to 3- 33-014 CATJ-36D/1XU- Includes connectors
core PILC 0.3 sq inch Cu H type 3SB-GB02
trifurcating joint
2 2
30980258 + 3 x 1-core XLPE 150mm -240mm to 3- 33-014 CATJ-36D/1XU- Use kit SMOE64282 (30025689).
30025689 core PILC 0.4-0.5 sq inch Cu H type 3SB-GB02 Contains larger tubes and connectors
trifurcating joint for large PILC cable.
2 2
30980259 3 x 1-core XLPE 150mm -240mm to 3- 33-017 CATJ-36D/1XU-3HL- Includes connectors
core PILC 0.3 sq inch Cu HSL trifurcating GB01
joint
3 x 30025657 1-core PILC 0.75 sq 33-027 33-009 CSJ-EndSeal-Kit-E- As above + larger connector
1 x 30025692 inch Cu GB01
3 x 30025685
3 x 30025657 1-core PILC 1.0 sq 33-028 33-010 CSJ-EndSeal-Kit-E- As above + larger connector
1 x 30025692 inch Cu GB01
3 x 30025690
1 x 30980258 3-core PILC 0.1 sq N/A 33-014 CATJ-36D/1XU-3SB- 3-core PILC pot ends made off using an
1 x 30025688 inch Cu H type GB02 + SMOE- appropriately sized trif joint kit + a set of
1 x 30025691 64171 + CSJ- poly rods from an End Seal kit. SMOE-
EndSeal-Kit-C-GB02 64171 kit is for small PILC cables
10.2.4 33kV Transformer Separable Tee connectors and couplers for XLPE 1-core cables
SAP Number Description SP reference Manufacturer Part Number Additional Information Approved
Manufacturer
2
30980233 1-core XLPE 150mm Cu or Alu 33-042 3XM400TB/G-150.240-45/SP Three connectors per pack
2
30027175 1-core XLPE 240mm Cu or Alu 33-043 3XM400TB/G-120.300-45/SP Three connectors per pack
2
30026496 1-core XLPE 400mm Alu N/A 3XM440TB/G-400-45/SP Three connectors per pack Nexans/Euromold
2
30025695 1-core XLPE 500mm Cu 33-044 3XM440TB/G-500-45/SP Three connectors per pack
2
30025696 1-core XLPE 630mm Cu 33-045 3XM440TB/G-630-45/SP Three connectors per pack
SAP Number Description SP reference Manufacturer Part Number Additional Information Approved
Manufacturer
30030579 Coupler for M400TB Tee N/A (M) 400CP-SC One coupler per pack
connectors Nexans/Euromold
30030580 Coupler for M440TB Tee N/A (M) 440CP + 676SA One coupler per pack
connectors
180A
Not held in Shear off connector for 1-core XLPE N/A SMOE 64222 EPPA-063- Available from manufacturer
2
stock 630mm to 1-core PILC 1.5sq inch joint kit 31/45-42/55-
180A
Not held in Shear off connector for 1-core XLPE N/A SMOE 64222 EPPA-063- Available from manufacturer
2
stock 500mm to 1-core PILC 1.5sq inch joint kit 27/41-43/56-
(Milliken conductor) 180A
Not held in Shear off connector for 1-core XLPE N/A SMOE 64222 EPPA-063- Available from manufacturer
2
stock 630mm to 1-core PILC 1.5sq inch joint kit 31/45-43/56-
(Milliken conductor) 180A
30025688 Connectors and tubes for 3-core PILC N/A 33-014 SMOE-64171 Contains smaller tubes and
0.1 sq inch Cu H type to 3 x 1-core shear off connectors to suit
2 2
XLPE 150mm -240mm 0.1sq inch PILC cable
30025689 Connector and tubes for 3-core PILC N/A 33-014 SMOE-64282 Contains larger tubes and
0.4/0.5 sq inch Cu H type to 3 x 1-core shear off connector to suit
2 2
XLPE 150mm -240mm 0.4/0.5 sq inch PILC cable
2
30032526 Shear off lug for 1-core XLPE 400mm N/A 33-031 HVTM33/4-12 M12 holed centre- palmed Sicame
(pack of 3) lug
2
30032527 Shear off lug for 1-core XLPE 400mm N/A 33-035 HVTM33/4-2H M12 hole and slot centre-
(pack of 3) palmed lug for OH
connections
30032528 Shear off lug for 1-core XLPE 500- N/A 33-032 HVTM33/3-12T M12 holed centre- palmed Sicame
2
630mm (pack of 3) lug
30032529 Shear off lug for 1-core XLPE 500- N/A 33-036 HVTM33/3-2HT M12 hole and slot centre-
2
630mm (pack of 3) palmed lug for OH
connections
SAC
2 2
30980303 1-core XLPE 300mm Cu to 1-core XLPE 300mm Cu 11-003 CSJT-12C/1XU-1XU-GB03 Connector included
2 2
30980304 1-core XLPE 500mm Cu to1-core XLPE 500mm Cu 11-004 CSJT-12E/1XU-1XU-GB01 Connector included
2
30980270 3-core XLPE 95-185mm SAC to 3-core XLPE 95- 11-005 CSJT-12B/3XU-3XU-GB01 Connectors included
2
300mm SAC
2
30980270 + 3-core XLPE 95-300mm SAC to 3-core XLPE 95- 11-005 CSJT-12B/3XU-3XU-GB01 When jointing 300-
2
30028640 300mm SAC 300mm use connector
module BAH-032100057
(30028640)
10.4.4 11kV Transition Trifurcating Straight Joints for XLPE to PILC/PICAS cables
SAP SP Manufacturer Part Approved
Description Additional Information
Number Reference Number Manufacturer
2
30980296 3 x 1-core XLPE 95/185mm SAC to 3- 11-015 CATJ-12B/1XU-3SB-GB01 Connectors included. Also requires build up
2
core PILC up to 70mm kit and earth kit for PILC cable.
2
30980297 3 x 1-core XLPE 95/185mm SAC - 3- 11-016 CATJ-12B/1XU-3SB-GB03 Connectors included. Also requires earth kit
2
core PILC/PICAS greater than 70mm for PILC / PICAS cable.
2
up to 185mm
2
30980298 3 x 1-core XLPE 95/300mm SAC - 3- 11-017 CATJ-12C/1XU-3SB-GB03 Connectors included. Also requires earth kit TE Connectivity
2
core PILC/PICAS greater than 185mm for PILC / PICAS cable and build up kit for
2 2
up to 300mm 95mm XLPE cable.
2
30980324 3 x 1-core or 3-core XLPE 95/300mm 11-018 SMOE-64147 Use in conjunction with an appropriate
SAC- 6-core PILC 0.1-0.2 sq inch transition branch joint. Also requires earth kit
for PILC cable and 2 x build up kits for 6-
core 0.1sq inch PILC cable.
95-300mm2 SAC / 3-core PILC/PICAS up to 003, 11-004, 11-005, Kit-C-GB02 ends are made off by
185mm2 11-009, 11-010 using an appropriately
sized straight joint kit
plus a set of polymeric
rods from End Seal kit.
2
30025693 3-core PILC/PICAS greater than 185mm up 11-025 11-011 CSJ-EndSeal- As above
2
to 300mm Kit-D-GB01
30025701 500mm Cu crimp lug M16 palm hole 11-039 L500C11W-42(16) Pack of 3
30027465 630mm Cu crimp lug M16 palm hole 11-040 L630C11W-44(16) Pack of 3
30980334 3 x 1-Core XLPE 500mm Cu C/W phase 11-043A MVSCTE3/SP Lugs supplied in kit
(compression) and earth lugs (M12)
30980335 3 x 1-Core XLPE 630mm Cu C/W phase 11-043B MVSCTE4/SP Lugs supplied in kit
(compression) and earth lugs (M12) SICAME
30980288 3-Core XLPE 95mm SAC C/W phase 11-044 MV3CTE1/SP Lugs plus Earth Parking Bars, Dropper Brackets
30029367 11kV Gland / Breakout Sealing Kit for N/A SMOE-63978 For use where a single gland enters the box.
185-300mm 1C Cables Use with 30980255 and 30980256.
30030810 11kV Breakout Sealing Kit for 95-300mm N/A SMOE-64326 For use when the existing brass gland is still
1C Cables being used. Use with 30980255 and 30980256
11kV 300mm Copper Termination Kit for N/A Contains gland sealing kit (1 termination per
30030421 1C Cables SMOE-64317 pack)
11kV 500mm Copper Termination Kit for N/A Contains gland sealing kit (1 termination per
30030422 1C Cables SMOE-64318 pack)
TE Connectivity
11kV 630mm Copper Termination Kit for N/A Contains gland sealing kit (1 termination per
30030423 1C Cables SMOE-64319 pack)
30031237 Single phase CNE pole termination for polymeric service cables connected direct to OH line HMFMCLKA008/SP Sicame
BAH-038081402 TE Connectivity
30031238 Single phase SNE pole termination for polymeric service cables connected direct to OH line HMFMCLKA009/SP Sicame
BAH-038081403 TE Connectivity
30031239 Three phase CNE/SNE pole termination for polymeric service cables connected direct to OH line HMFMCLKA010/SP Sicame
BAH-038081404 TE Connectivity
30030055 Single phase CNE pole termination for polymeric service cables connected to pole mounted fuses HMFMCLKA011/SP Sicame
BAH-038081405 TE Connectivity
30030056 Single phase SNE pole termination for polymeric service cables connected to pole mounted fuses HMFMCLKA012/SP Sicame
BAH-038081406 TE Connectivity
Three phase CNE/SNE pole termination for polymeric service cables connected to pole mounted HMFMCLKA013/SP Sicame
30030057
fuses TE Connectivity
BAH-038081407
30031240 Mains / service branch joint for 3 or 4-core waveform cables up to 185mm
2 12.0 litres of resin HMFMCLKA014/SP Sicame
9.5 litres of resin BAH-038081408 TE Connectivity
30031241 Mains / service branch joint for 3 or 4-core waveform cables 240-300mm
2 13.8 litres of resin HMFMCLKA015/SP Sicame
12 litres of resin BAH-038081409 TE Connectivity
2
30031242 Mains / service branch joint for PILC cables 60-95mm 13.8 litres of resin HMFMCLKA016/SP Sicame
BAH-038081433 TE Connectivity
2 HMFMCLKA040/SP Sicame
30031266 LV 3 or 4-core Waveform Termination to Pole Mounted Fuses (185mm )
BAH-038081434 TE Connectivity
2
185mm channel type straight connector. Fully insulated phase/neutral connector. Use in HMFMCLKA056/SP Sicame
30031284
conjunction with 30031246 for 4-core to 4-core waveform or 4-core waveform to PILC BAH-032020080 TE Connectivity
2
185mm extended channel type straight connector. Fully insulated phase/neutral connector HMFMCLKA057/SP Sicame
30031285
(50mm longer). Used in conjunction with 30031201, 30031202 & 30031203 for temporary joints. BAH-032020102 TE Connectivity
2
300mm channel type straight connector. Fully insulated phase/neutral connector. Use in HMFMCLKA058/SP Sicame
30031286
conjunction with 30031247 for 4-core to 4-core waveform or 4-core waveform to PILC BAH-032020081 TE Connectivity
2
300mm extended channel type straight connector. Fully insulated phase/neutral connector HMFMCLKA059/SP Sicame
30031287
(50mm longer). Used in conjunction with 30031202 & 30031203 for temporary joints. BAH-032020103 TE Connectivity
2
95mm channel type branch connector module. Fully insulated branch connector for use in HMFMCLKA060/SP Sicame
30031288 conjunction with 30031245 for 3-core waveform to PILC. 30031248 for 3-core to 4-core waveform
or 4-core to 4-core waveform. BAH-033000081 TE Connectivity
2
95mm channel type branch connector C/W brass non-shear bolts module. Branch connector for HMFMCLKA061/SP Sicame
30031289
use in conjunction with 30031199 & 30031200 for strapping over cores in temporary joints. BAH-033000082 TE Connectivity
2
185mm channel type branch connector module. Fully insulated branch connector for use in
HMFMCLKA062/SP Sicame
conjunction with 30031245 for 3-core to 4-core waveform, 30031246 for 3-core waveform to PILC.
30031290
30031248 for 4-core to 3-core waveform. 30031249 for 3-core to 4-core waveform or 4-core to 4-
BAH-033000083 TE Connectivity
core waveform.
2
185mm channel type branch connector C/W brass non-shear bolts module. Branch connector for HMFMCLKA063/SP Sicame
30031292
use in conjunction with 30031201, 30032102 & 30031203 for use in temporary joints. BAH-033000084 TE Connectivity
2
300mm channel type branch connector module. Fully insulated branch connector for use in HMFMCLKA064/SP Sicame
conjunction with 30031246 & 30031247 for 3-core to 4-core waveform. 30031247 for 3-core
30031293
waveform to PILC. 30031249 for 4-core to 3-core waveform. 30031250 for 3-core to 4-core
BAH-033000085 TE Connectivity
waveform or 4-core to 3-core waveform or 4-core to 4-core waveform.
2
30031294 300mm channel type branch connector C/W brass non-shear bolts module. Branch connector for HMFMCLKA065/SP Sicame
use in conjunction with 30032102 & 30031203 for strapping over cores in temporary joints. BAH-033000086 TE Connectivity
2
30031295 95mm channel type length branch connector module. Use in conjunction with 30031258 for HMFMCLKA066/SP Sicame
2
neutral to earth bond (where required) in 95mm 4-core waveform Stop End BAH-033000087 TE Connectivity
2
30031296 300mm channel type length branch connector module. Use in conjunction with 30031259 for HMFMCLKA067/SP Sicame
2 2
neutral to earth bond (where required) in 185/240mm or 300mm 4-core waveform Stop End BAH-033000088 TE Connectivity
2
30031297 95mm Service Bridge Piece module. Fully insulated additional service phase/neutral bridge piece HMFMCLKA068/SP Sicame
for connecting service cables using connectors supplied in mains straight joint 30031245 BAH-037100071 TE Connectivity
2
30031298 185mm Service Bridge Piece module. Fully insulated additional service phase/neutral bridge HMFMCLKA069/SP Sicame
piece for connecting service cables using connectors supplied in mains straight joint 30031246 BAH-037100072 TE Connectivity
2
30031299 300mm Service Bridge Piece module. Fully insulated additional service phase/neutral bridge HMFMCLKA070/SP Sicame
piece for connecting service cables using connectors supplied in mains straight joint 30031247 BAH-037100073 TE Connectivity
2 2
30031300 Up to 35mm PILC service cable Earth Bond Kit for up to 35mm earth wire module. For use with HMFMCLKA083/SP Sicame
Pilc service cable cut-out changes BAH-035040026 TE Connectivity
2 2
30031301 50-120mm PILC Mains cable Earth Bond Kit for up to 70mm earth wire. Use in conjunction with HMFMCLKA084/SP Sicame
30031245, 30031254, 30031255, 30031256, 30031257, 30031199 & 30031200 BAH-035030080 TE Connectivity
2 2
30031302 185-300mm PILC Mains cable Earth Bond Kit for up to 70mm earth wire module. Use in HMFMCLKA085/SP Sicame
conjunction with 30031257, 30031199, 30031201 & 30031202 BAH-035030081 TE Connectivity
2 2
30031303 185-300mm PILC Mains cable Earth Bond Kit for up to 140mm earth wire module. Use in HMFMCLKA086/SP Sicame
conjunction with 30031246, 30031247, 30031255 & 30031257 BAH-035030082 TE Connectivity
Torque Limiting shear-off device module. Shear off device to ensure the correct torque has been HMFMCLKA071/SP Sicame
30031304 achieved on worm drive clips. Use in conjunction with temporary joints 30031199, 30031200,
30031201 & 30031202 BAH-018070233 TE Connectivity
2
30031315 60-120mm brass shear-off lug module. Brass termination shear-off lug for stranded Copper HMFMCLKA082/SP Sicame
2 2
neutral/earth and earth wires in 185-300mm waveform cables and 70mm green/yellow earth wire BAH-024020018 TE Connectivity
SAP Approved
Description Manufacturer Part Number
Number Manufacturer
30980548 Single phase plastic service cable CSCAK 1
30980549 Three phase plastic service & 95mm waveform CSCAK 2
30980550 185mm, 240mm, & 300mm waveform CSCAK 3
3M
30980551 2-core PILC service cable diameter 18-25mm CSCAK 4
30980552 4-core PILC service cable diameter 25-42mm CSCAK 5
30980553 70-120mm 4-c PILC Main diameter 42-52mm CSCAK 6
30980554 185-300mm 4-c PILC Main diameter 52-81mm CSCAK 7
N/A 4 way 4-core waveform link box untailed 40 Litres BAH-038110099 Available from supplier
N/A 2 way 3-core waveform link box untailed 13 Litres BAH-038110065 Available from supplier
N/A 4 way 3-core waveform link box untailed 35 Litres BAH-038110066 Available from supplier TE Connectivity
* The Nexans, Hanover factory has 3 extrusion lines. Only cable manufactured on the extrusion line designated S119 is Approved for use.
14.3 11kV Cables
14.3.1 XLPE Insulated Single Core cables
Approved Manufacturer References
SAP Number Description
(see section 9.1 for key)
2
30980100 95 mm circular solid Aluminium 11kV single core with red oversheath.
2
30980101 185 mm circular solid Aluminium 11kV single core with red oversheath. Cab, NKT-D, Pry-W
2
30980102 300 mm circular solid Aluminium 11kV single core with red oversheath.
2
30980098 300 mm circular stranded Copper 11kV single core with red oversheath.
2
30980099 500 mm circular stranded Copper 11kV single core with red oversheath. Cab, NKT-D, Pry-W
2
30026565 630 mm circular stranded Copper 11kV single core with red oversheath.
14.4.2 3-core & 4core solid sectoral Aluminium Mains cable with concentric Copper CNE or Earth conductor and LSOH Oversheath (Orange)
Approved Manufacturer References
SAP Number Description
(see section 9.1 for key)
30980175 3-core 95mm Cu concentric N/E with LSOH oversheath.
30980176 3-core 185mm Cu concentric N/E with LSOH oversheath.
30980177 3-core 300mm Cu concentric N/E with LSOH oversheath.
NKT-D, Pry-W
30980152 4-core 95mm Cu concentric N/E with LSOH oversheath.
30980153 4-core 185mm Cu concentric N/E with LSOH oversheath.
30980154 4-core 300mm Cu concentric N/E with LSOH oversheath.
Approvals detailed in this section are non-project specific. Listed cables and accessories are qualified
as individual items, allowing them to be included in Tender submissions for future cable projects at
132kV and above.
Prior to connection to the Companys network, a further project specific assessment is required, this will
consider the offered cable system design as a whole, the compatibility of the individual components and
their suitability for the Project in question. This project specific assessment will be carried out post-
Tender and prior to contract award.
The detail and limitations of the range of Approvals for each manufacturer is documented separately to
maintain confidentiality and has been advised individually to each manufacturer.
15.1 132kV XLPE cables and associated accessories
Cables and accessories for 132kV shall comply with the requirements of CAB 03 031. The following
manufacturers are Approved.
* Only specific extrusion lines are Approved for each site. The details of Approved lines have
been advised to each manufacturer.
** A limited range of accessories is Approved from each Manufacturer. The details of Approved
accessories have been advised to each manufacturer.
* Only specific extrusion lines are Approved for each site. The details of Approved lines have
been advised to each manufacturer.
** A limited range of accessories is Approved from each Manufacturer. The details of Approved
accessories have been advised to each manufacturer.