0%(1)Il 0% ha trovato utile questo documento (1 voto)
252 visualizzazioni1 pagina
The document describes a gas in a tube that is accelerated to Mach 1.5 by sending a shock wave through the tube. It provides the initial pressure and temperature of the motionless air and asks to calculate the necessary shock wave velocity relative to the tube. It also gives total and static pressure measurements from a u-tube manometer for a Mach 1.5 flow and asks to determine the static temperature using the total temperature measurement from a probe, the Mach number, and the probe's recovery factor.
The document describes a gas in a tube that is accelerated to Mach 1.5 by sending a shock wave through the tube. It provides the initial pressure and temperature of the motionless air and asks to calculate the necessary shock wave velocity relative to the tube. It also gives total and static pressure measurements from a u-tube manometer for a Mach 1.5 flow and asks to determine the static temperature using the total temperature measurement from a probe, the Mach number, and the probe's recovery factor.
The document describes a gas in a tube that is accelerated to Mach 1.5 by sending a shock wave through the tube. It provides the initial pressure and temperature of the motionless air and asks to calculate the necessary shock wave velocity relative to the tube. It also gives total and static pressure measurements from a u-tube manometer for a Mach 1.5 flow and asks to determine the static temperature using the total temperature measurement from a probe, the Mach number, and the probe's recovery factor.
Consider motionless air with p1=0.1 atm and t1=300 K in a constant-area tube.
It is desired to accelerate this gas to Mach 1.5 by sending a normal shock wave through the tube. Calculate the necessary value of the wave velocity relative to the tube.
A u-tube manometer measures total and static pressure of high-speed flows as
535 mm of hg(suction)
a total temperature probe on a flat plate measures the temperature of
supersonic air flow with mach 1.5 as 520k. if the probe has a recovery factor of 0.97, determine the static temperature