Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hand Tools
3 in 261-8583 50.0 mm (1.97 in)
8
7 in 261-8585 50.0 mm (1.97 in)
6 point 16
1 in 261-8586 54.1 mm (2.13 in)
38 inch square drive 2
9 in 261-8587 55.6 mm (2.19 in)
Includes socket bar and clips 16
5 in 261-8589 57.2 mm (2.25 in)
8
11 in 261-8590 64.3 mm (2.53 in)
16
3 in 261-8591 65.8 mm (2.59 in)
4
ID: D00708T1
ID: D01125T1
ID: D01131T1
1-1
Ratchets / Socket Drive Adapters Hand Tools (Inch)
Sealed heads protect internal components from outside environment which leads
to longer product life and reduced maintenance, and prevents gear slippage
Heads forged to exact tolerances for longer tool life and greater head strength
High strength internal mechanism provides longer tool life
Hand Tools
Ergonomic handle reduces user fatigue and has a more comfortable grip ID: il2, D00707T1
Reverse lever can be shifted with one hand which saves time when the gear
mechanism needs to be reversed in tight places Drive Smallest
Square drive is close to the end of the head, giving maximum accessibility Size Part No. Length Working Arc Repair Kit
to fasteners in restricted areas 1
4 239-6823 112.3 mm (4.42 in) 12 230-0812
Nickel chrome plating provides a durable, corrosion resistant coating 3
8 239-6824 187.0 mm (7.38 in) 12 230-0813
and a brilliant tool finish 1 239-6825 261.9 mm (10.31 in) 10 214-7339
2
Ratchets
Warranty: Lifetime
Sealed heads protect internal components from outside environment which leads to longer product life
and reduced maintenance, and prevents gear slippage
Heads forged to exact tolerances for longer tool life and greater head strength
High strength internal mechanism provides longer tool life
Ergonomic handle reduces user fatigue and has a more comfortable grip
Reverse lever can be shifted with one hand which saves time when the gear mechanism needs to be reversed
in tight places
Square drive is close to the end of the head, giving maximum accessibility to fasteners in restricted areas
Nickel chrome plating provides a durable, corrosion resistant coating and a brilliant tool finish
1-2
Hand Tools (Inch) Wrench Sets
Hand Tools
Durable nickel chrome finish
1 in 248-8814 180 mm (7 116 in)
2
9 in 248-8815 190 mm (7 12 in)
16
5 210 mm (8 14 in)
8 in 248-8816
11 in 248-8817 230 mm (9 116 in)
16
3 in 248-8818 250 mm (9 1316 in)
4
ID: D01359T1
Increased torque wrench box end contacts the fastener on the flats rather than on the corners,
preventing rounding of the fastener and allowing for more torque to be applied
Concentric or uniform wall thickness on the box end eliminates weak spots while allowing
for a thin wall design for greater accessibility
Continuous arc open end design evenly distributes applied stress over the entire radius of the open end,
enhancing the wrench strength and life of the tool
Long handles for better reach and greater applied torque
Highly polished nickel/chrome plating tough nickel for corrosion resistance and chrome plating
for wear resistance and a mirror-like finish
Drive Size Part No. Length
3 in 1P-3501 122.9 mm (4.84 in)
8 ID: il2, D00737T1
7 in 1P-3502 137.4 mm (5.41 in)
16
1 in 1P-3503 151.6 mm (5.97 in)
2
9 in 1P-3504 166.6 mm (6.56 in)
16
5 in 1P-3505 180.8 mm (7.12 in)
8
11 in 1P-3506 197.6 mm (7.78 in)
16
3 in 1P-3507 210.3 mm (8.28 in)
4
Increased torque wrench box end contacts the fastener on the flats rather than on
the corners, preventing rounding of the fastener and allowing for more torque to be applied
Concentric or uniform wall thickness on the box end eliminates weak spots while
allowing for a thin wall design for greater accessibility
Continuous arc open end design evenly distributes applied stress over the entire radius
of the open end, enhancing the wrench strength and life of the tool
Long handles for better reach and greater applied torque
Highly polished nickel/chrome plating tough nickel for corrosion resistance and
chrome plating for wear resistance and a mirror-like finish
1-3
Socket Sets Hand Tools (Metric)
SAE / Metric impact sockets quickly and easily remove damaged or rounded nuts and bolts
6 fluted sockets grip onto fastener and tighten as more torque is applied (no hammering
required to install socket over fastener)
Applications include oil pan drain plugs,
exhaust manifold nuts, studs, pipe nipples, Size Part No. Length
and corroded marine fasteners 10 mm 241-0860 31.8 mm (114 in)
Shallow depth 12 mm 241-0861 31.8 mm (114 in)
Fits sizes from 10 to 19 mm (38 to 34 inch) 13 mm 241-0862 31.8 mm (114 in)
38 inch square drive 14 mm 241-0863 31.8 mm (114 in)
Standard length 15 mm 241-0864 31.8 mm (114 in)
Industrial black finish 17 mm 241-0865 31.8 mm (114 in)
Includes plastic tray, socket bar, and clips 3 in
8 241-0866 31.8 mm (11ID:
4 in)
D00971T1
Can be ordered by set or individual 7 in
16 241-0867 31.8 mm (114 in)
1 in 241-0868 31.8 mm (114 in)
2
9 in 241-0869 31.8 mm (114 in)
16
5 31.8 mm (114 in)
8 in 241-0870
11 in 241-0871 34.9 mm (138 in)
16
3 in 241-0872 34.9 mm (138 in)
4
ID: D00708T1
1-4
Hand Tools (Metric) Socket Sets / Individual Sockets /
Ratchet Set
Hand Tools
5 mm 1 in 243-5185 47.9 mm (1.89 in)
4
ID: D01137T1
All sockets are polished chrome finish unless otherwise noted Individual Sockets, 12 inch Drive
1-5
Wrench Sets / Screwdriver Set Hand Tools (Metric) /
Miscellaneous Hand Tools
Increased torque wrench box end contacts the fastener on the flats rather than on the corners,
preventing rounding of the fastener and allowing for more torque to be applied
Concentric or uniform wall thickness on the box end eliminates weak spots while allowing for
a thin wall design for greater accessibility
Hand Tools
Continuous arc open end design evenly distributes applied stress over the entire radius of the open end,
enhancing the wrench strength and life of the tool
Long handles for better reach and greater applied torque
Drive Size Part No. Length
Highly polished nickel/chrome plating tough nickel for
10.0 mm 6V-9090 171.0 mm (6.73 in)
corrosion resistance and chrome plating for wear resistance
and a mirror-like finish 11.0 mm 6V-9091 184.0 mm (7.24 in)
12.0 mm 6V-9092 195.0 mm (7.68 in) ID: il2, D00713T1
13.0 mm 6V-9093 207.0 mm (8.15 in)
14.0 mm 6V-9094 219.0 mm (8.62 in)
15.0 mm 6V-9095 233.0 mm (9.17 in)
16.0 mm 6V-9096 242.0 mm (9.53 in)
17.0 mm 6V-9097 256.0 mm (10.08 in)
18.0 mm 6V-9098 267.0 mm (10.51 in)
19.0 mm 6V-9099 280.0 mm (11.02 in)
Exclusive high-tech handle for a more comfortable grip and more powerful performance
1-6
Miscellaneous Hand Tools Pry Bars / Hammers
Hand Tools
Pry bars purchased separately
Hammers
1-7
Hammers / Pliers / Paint Brushes Miscellaneous Hand Tools
Multiple Use Hammers Item Part No. Description Face Diameter Overall Length Weight
1 223-1697 Double Face Sledge 47.75 mm (1.88 in) 889.0 mm (35.00 in) 4.36 kg (9.62 lb)
2 223-1694 Dead Blow Sledge 69.85 mm (2.75 in) 508.0 mm (20.00 in) 2.50 kg (5.50 lb)
3 223-1693 Hand Drilling (Short Handle) 38.10 mm (1.50 in) 273.05 mm (10.75 in) 1.82 kg (4.00 lb)
Not shown
223-1698 Double Face Sledge 53.98 mm (2.13 in) 905.0 mm (35.63 in) 4.95 kg (10.92 lb)
Hand Tools
245-9823 Double Face Sledge 73.00 mm (2.88 in) 914.0 mm (36.00 in) 7.25 kg (16.00 lb)
223-1695 Dead Blow Sledge 82.55 mm (3.25 in) 914.40 mm (36.00 in) 5.45 kg (12.00 lb)
Hammer Handles
Part No. Size Material
263-3821 762 mm (30 in) Hickory
263-3822 915 mm (36 in) Hickory
ID: D00222T1
Hardened cutting edges stay sharper longer and cut with less effort Part No. Description Length
Machined cutter heads for matched blades 6V-6192 Combination Pliers 190.5 mm (7.50 in)
Black oxide finish 6V-6193 Diagonal Cutter Pliers 185.7 mm (7.30 in)
Vinyl grip 6V-6194 Needle Nose Pliers 181.0 mm (7.10 in)
Paint Brushes
ID: D01215T1
1-8
Torque Wrenches Extensions / Pneumatic Wrenches
Torque Wrenches
Hand Tools
Used for fasteners in inaccessible places, such as track roller guard bolts, where a torque
wrench and standard socket cannot be used
Has an effective length of 610 mm (24 in) and a capacity Part No. Description
up to 884 Nm (650 ft-lb) 6V-3146 Tubular Extension
A slide rule type torque computer, Form SEHS7150, 6V-4170 Adapter, 34 inch,
is available to determine the torque Sq. Drive
wrench dial reading for different extensions
Allows controlled output torque from 286 Nm (200 ft lbs) to 4125 Nm (3000 ft lbs)
Output torque is set by adjusting air pressure regulator (part of 194-7591 Regulator Group)
All wrench groups have standard 1 inch square drive
Requires 689 kPa (100 PSI) air pressure to achieve maximum torque
Wrench group works well in applications requiring different torque specifications (readjust
torque setting by simply adjusting air pressure)
Regulator group includes cage, hose, pressure gauge, and filter assembly filter assembly
is equipped with air filter, pressure regulator, and automatic oiling system
Requires 4C-8856 Fitting and 8T-9568 Oil (not included)
194-7586 Pneumatic Wrench Group (RAD 2000) 1
Torque range 571 to 2857 Nm (400 to 2000 ft lbs)
Square drive 1 inch
Air pressure for maximum torque 689 kPa (100 PSI)
Air consumption at 689 kPa (100 PSI) 20 cfm
Minimum pressure 103 kPa (15 PSI)
Service Parts
ID: C79949T1
Part No. Description 194-7582 Pneumatic Wrench Group (RAD 25) 1
194-7589 Pneumatic Wrench Group Torque range 1143 to 4285 Nm (800 to 3000 ft lbs)
195-7592 Reaction Arm Square drive 1 inch
194-7607 Snap Ring Kit Air pressure for maximum torque 689 kPa (100 PSI)
195-3500 Wrench Assembly Air consumption at 689 kPa (100 PSI) 32 cfm
194-7591 Regulator Group Minimum pressure 103 kPa (15 PSI)
194-7609 Hose Assembly Service Parts
194-7610 Cage Assembly Part No. Description
194-7611 Filter Assembly 194-7590 Pneumatic Wrench Group
194-7612 Gauge Pressure 194-7605 Reaction Arm
1 262-6728 Reaction Blank is available 194-7608 Snap Ring Kit
195-3501 Wrench Assembly
Repair Information 194-7591 Regulator Group
195-3499, 195-3500, and 195-3501 Wrench Assemblies must be sent
to the address below for repair. The wrench must be accompanied 194-7609 Hose Assembly
with a Return Material Authorization Number before shipping to the OEM. 194-7610 Cage Assembly
Pneumatic Tools
Air Drills
Warranty: Manufacturers
Compliant
Hand Tools
Air consumption, free speed 71 SCFM (10 CFM) [283.2 I/min.] 71 SCFM (10 CFM) [283.2 I/min.]
ID: D00863T1
Air consumption, working 43 SCFM (6 CFM) [169.9 I/min.] 43 SCFM (6 CFM) [169.9 I/min.]
Horsepower 0.3 0.3
Free speed 2200 RPM 900 RPM
Sound level, free speed 92 dBa 97 dBa
Sound level, working 104 dBa 109 dBa
Spindle thread 3 in - 24 UNF 3 in - 24 UNF
8 8
Electrical Tools
1-10
Electrical Tools Cordless Wrenches / Chargers
Hand Tools
Battery operation means the impact wrench operates anywhere (great for field 233-9732 Impact Kit (Europe)
service applications) Service Parts
Eliminates air hoses and extension cords 233-9738 Battery Charger (U.S.A.) 120V, 60 Hz
Cushion grip makes using this impact wrench more comfortable and therefore 233-9740 Battery Charger (Japan) 100V, 60 Hz
reduces user fatigue
233-9741 Battery Charger (Australia) 220 to 240V, 50/60 Hz
Designed for one-hand, forward and reverse operation
233-9743 Battery Charger (UK) 220 to 240V, 50/60 Hz
All impact wrenches have a 12 square drive
233-9745 Battery Charger (Europe) 220 to 240V, 50/60 Hz
Variable speed switch provides maximum user control
233-9746 Battery (replacement) 19.2 VDC (all models)
Metal nose piece adds strength and durability
Three piece housing allows easier accessibility for service, and a fan cooled
motor ensures comfortable housing temperatures
High-output, 19.2 Volt nickel-cadmium battery system provides high torque
Batteries can be charged using either a conventional AC battery charger
(see Service Parts chart) or a 233-9747 Mobile Charger (12VDC)
Slide style positive lock battery resists vibration and provides
a more secure method of battery retention
Replacement chargers for cordless drills and impact wrenches (233-9733, 233-9734, 233-9735, 233-9736, and 233-9737 Drill Kits
and 233-9689, 233-9690, 233-9712, 233-9731, and 233-9732 Impact Wrench Kits)
Used with 233-9746 Battery
Cordless impact wrench and drill battery chargers deliver a more complete charge that contributes to longer battery pack life
Built-in microprocessor monitors battery pack status every 10 seconds to ensure a fully charged battery
Automatically stops charging when battery is fully charged (provides maximum battery life)
Battery voltage 19.2 VDC
Battery type Nickel-cadmium
Part No, Description Voltage
Charging time 60 minutes
233-9738 Battery Charger (U.S.A.) 120V, 60 Hz
Weight 1.5 kg (3.3 lbs)
233-9740 Battery Charger (Japan) 100V, 60 Hz
Charger output 2.4 Amps
233-9741 Battery Charger (Australia) 220 to 240V, 50/60 Hz
233-9743 Battery Charger (UK) 220 to 240V, 50/60 Hz
233-9745 Battery Charger (Europe) 220 to 240V, 50/60 Hz
1-11
Charger / Extension Cords Electrical Tools
Compliant
12 volt, mobile charger for cordless drills and impact wrenches (233-9733, 233-9734, 233-9735, 233-9736, and 233-9737 Drill Kits
and 233-9689, 233-9690, 233-9712, 233-9731, and 233-9732 Impact Wrench Kits)
Hand Tools
ID: C79360T1
1-12
Tool Boxes Cabinets
Tool Boxes
Hand Tools
40 inch and 30 inch top chests have a top compartmentgas spring in 40 inch top chest and slide lock on 30 inch top chest allow top compartment to open easily
Double-wall steel construction provides strength and durability to support loaded drawers so they stay level
Full length stiffener under the cover is welded to sides of the cover to provide the strongest top cover available and to minimize racking
Extra deep drawer pulls give more finger room (almost 1 inch) to comfortably pull the drawer
Rolled edges on drawers add strength, rigidity, and safety
Ball-bearing slides provide extra weight support with smooth, one-hand operation
Ergonomic handle design provides comfortable gripping and ease of maneuvering
Gussets on corners improve cabinet strength so the cabinet stays square
Drawer liners included
Caster plates and weldnuts keep casters tight for smooth rollingcaster screws pass through double thick steel plates and pre-threaded weldnuts
ID: D00371T1
ID: D00503T1
1-13
Cabinets Tool Boxes
223-3832 Cover for the 76.2 cm (30 in) combo top chest and roller cabinet
223-3833 Cover for the 101.6 cm (40 in) combo top chest and roller cabinet
223-3834 Cover for the 134.62 cm (53 in) combo top chest and roller cabinet
Organizing Foam
246-7948 Organizing Foam for 212-6146 30 inch Combo for 222-7876 Student Tool Set
246-7950 Organizing Foam for 212-6149 40 inch Combo for 222-7876 Student Tool Set
1-14
Tool Boxes Cabinets / Tool Bag
Hand Tools
Drawer, 30.48 cm (12 inch) narrow 1 28.45 cm 44.45 cm 29.72 cm 37605.2 cm
(11.2 in) (17.5 in) (11.7 in) (2293 in)
Drawer, 5.08 cm (2 inch) wide 2 88.14 cm 44.45 cm 4.06 cm 31865.2 cm
(34.7 in) (17.5 in) (1.6 in) (1943 in)
Drawer, 10.16 cm (4 inch) wide 4 88.14 cm 44.45 cm 9.14 cm 143401.6 cm
(34.7 in) (17.5 in) (3.6 in) (8744 in)
Drawer, 20.32 cm (8 inch) wide 1 88.14 cm 44.45 cm 19.30 cm 75686 cm
(34.7 in) (17.5 in) (7.6 in) (4615 in)
214-6151 Top Chest, Double Bank, 53 inch
Overall 10 135.64 cm 50.29 cm 50.8 cm 130986.8 cm 122.13 kg
(53.4 in) (19.8 in) (20 in) (7987 in) (269 lb)
Drawer, 5.08 cm (2 inch) narrow 2 28.45 cm 44.45 cm 4.06 cm 10282.8 cm
(11.2 in) (17.5 in) (1.6 in) (627 in)
Drawer, 10.16 cm (4 inch) narrow 3 28.45 cm 44.45 cm 9.14 cm 34718.8 cm
(11.2 in) (17.5 in) (3.6 in) (2117 in)
Drawer, 5.08 cm (2 inch) wide 2 88.14 cm 44.45 cm 4.06 cm 19647.2 cm
(21.4 in) (17.5 in) (1.6 in) (1198 in)
Drawer, 10.16 cm (4 inch) wide 3 88.14 cm 44.45 cm 9.14 cm 66338 cm
(21.4 in) (17.5 in) (3.6 in) (4065 in)
214-7345 Six Drawer Side Cabinet
Overall 6 41.91 cm 50.04 cm 86.36 87428.4 cm 51.76 kg
(16.5 in) (19.7 in) (34 in) (5331 in) (114 lb)
Drawer, 5.08 cm (2 inch) 1 28.45 cm 44.45 cm 3.81 cm 4821.6 cm
(11.2 in) (17.5 in) (1.5 in) (294 in)
Drawer, 10.16 cm (4 inch) 4 28.45 cm 44.45 cm 8.89 cm 45001.6 cm
(11.2 in) (17.5 in) (3.5 in) (2744 in)
Drawer, 30.48 cm (12 inch) 1 28.45 cm 44.45 cm 29.72 cm 37605.2 cm
(11.2 in) (17.5 in) (11.7 in) (2293 in)
214-7344 Bulk Side Cabinet
2 shelves 41.91 cm 50.04 cm 86.36 cm 181252.8 cm 34.05 kg
(16.5) (19.7 in) (34 in) (11052 in) (75 lb)
1-15
Plastic Tool Boxes Tool Boxes
236-5133
3 Tiers including a jumbo tub sized to hold circular saws and other large items
Large tote tray will store drills, extension cords and other bulky supplies
Hand Tools
Top tray has eight compartments for organizing hand tools, fasteners and supplies
V-groove in lid holds pipes and dowels in place for sawing
Includes durable caddy with retractable telescoping handle
Two large wheels for rolling over various indoor and outdoor surfaces
Dimensions: 670 x 395 x 429 mm (26.4 x 15.6 x 16.9 in)
Weight: 8 kg (17.6 lbs)
ID: D00295T1
236-5134
3 Tiers including a jumbo tub sized to hold circular saws and other large items
Large tote tray will store drills, extension cords and other bulky supplies
Top tray has eight compartments for organizing hand tools, fasteners and supplies
V-groove in lid holds pipes and dowels in place for sawing
Dimensions: 526 x 344 x 426 mm (20.7 x13.5 16.8 in)
Weight: 5 kg (11 lbs)
ID: D00301T1
236-5135
Two steel latches mean extra strength while carrying box
Removable plastic tote tray for organizing small tools and supplies
Durable design and lightweight
Comfort-grip handle for ease in carrying
Dimensions: 504 x 216 x 225 mm (19.9 x 8.5 x 8.9 in)
Weight: 2 kg (4.4 lbs)
ID: D00319T1
236-5136
Large tray for holding most tools
Clear top parts storage compartments for organizing small parts
Tub Is sized to hold most drills and most power tools
Tote tray allows for easy access to hand tools like hammers and screwdrivers
High performance latches for locking
Lockable to secure valuables (padlock not included)
Dimensions: 406 x 229 x 331 mm (17.3 x 9.0 x 13.0 in)
Weight: 3 kg (6.6 lbs)
ID: D00307T1
236-5137
Three levels of storage
Tub is sized to hold most drills and many small power tools
Tote tray allows for easy access to hand tools like hammers and
screwdrivers
Compartments in top tray for organizing small parts and supplies
Tote and top tray have molded handles to carry separately
V-groove in lid holds pipes and dowels for sawing
Dimensions: 406 x 229 x 318 mm (16.3 x 9.0 x 12.5 in)
Weight: 2 kg (4.4 lbs)
1-16
Shop Supplies
Abrasive Tyvek Coveralls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15
Wire Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Mechanics Glove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Crimped End Wire Brushes, 6.4 mm (14 in) Shank . . . . . 2-1 Premium Mechanics Gloves . . . . . . . . . . . . . . . . . . . . . . 2-16
Nylon Cleaning Brushes . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Winter Work Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Brass Bristle Cleaning Brush . . . . . . . . . . . . . . . . . . . . . . 2-2 Fingerless Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Parts Cleaning Brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Unlined Grain Leather Drivers Gloves . . . . . . . . . . . . . . 2-16
Flap Brush with Non-Woven Surface Lined Leather Drivers Gloves . . . . . . . . . . . . . . . . . . . . . 2-17
Conditioning Material . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Split Leather Drivers Gloves . . . . . . . . . . . . . . . . . . . . . 2-17
Type 29 Zirconium Flap Discs . . . . . . . . . . . . . . . . . . . . . 2-3 Split Leather Palm Gloves . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Type 29 Zirconia Flap Disc with 58-11 Hub . . . . . . . . . . 2-3 268-8795 Split Leather Palm Gloves . . . . . . . . . . . . . . . . 2-17
Hi-Density Zirconia Flap Disc with 58-11 Hub . . . . . . . . 2-3 Split Cowhide Palm Gloves . . . . . . . . . . . . . . . . . . . . . . . 2-17
Fiber Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 246-5163 Traditional All-purpose Gloves . . . . . . . . . . . . 2-18
262-9736 PSA Stick-It Discs . . . . . . . . . . . . . . . . . . . . . . 2-4 Jersey Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Hook and Loop Sanding Discs . . . . . . . . . . . . . . . . . . . . . 2-4 Fleeced Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Type 27 Aluminum Oxide 4 inch Grinding Wheel . . . . . . 2-5 246-5169 Reversible Gloves . . . . . . . . . . . . . . . . . . . . . . 2-18
262-9739 Large Flap Wheel Sander . . . . . . . . . . . . . . . . 2-5 Leather Welding Gloves . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Surface Condition Brush . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 246-5164 Neoprene-coated Gloves . . . . . . . . . . . . . . . . 2-18
Abrasive Flap Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Disposable Nitrile Gloves . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Abrasive Hand Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Disposable Latex Gloves . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
266-3452 Emery Paper . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Nylon Gloves with Nitrile Coating . . . . . . . . . . . . . . . . . 2-19
Cloth Shop Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 245-5836 Oil Absorbent Pads . . . . . . . . . . . . . . . . . . . . . 2-19
Sanding Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Absorbent Socks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Carbide and Aluminum Carbide Burs . . . . . . . . . . . . . . . 2-7 Heavyweight Absorbent Material for Most Oil,
Carbide Burs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Water-Based Fluids, and Chemicals . . . . . . . . . . . . . . 2-20
Aluminum Carbide Burs . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 261-0115 High-Visibility Yellow Mat . . . . . . . . . . . . . . . 2-21
264-4353 Single Edge Razor Blades . . . . . . . . . . . . . . . . 2-7 265-2255 All-Purpose Wipers . . . . . . . . . . . . . . . . . . . . . 2-21
Metal Cutting 254-3422 WypAll X60 . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
English and Metric Thread Insert 265-2256 Low Lint Task Wipers . . . . . . . . . . . . . . . . . . . 2-21
Master Kits (Keensert) . . . . . . . . . . . . . . . . . . . . . . . . 2-8 263-0892 Hard Roll Towels . . . . . . . . . . . . . . . . . . . . . . . 2-22
Insert Kits and Replacement Kits . . . . . . . . . . . . . . . . . . 2-8 263-0884 Paper Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Hardware Film Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Check-a-Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 262-4862 Triangular Highway Warning Kit . . . . . . . . . . 2-22
Chemicals/Lubricants/Adhesives Material Handling, Storage, Packaging,
264-4356 Plastic Spray Bottle . . . . . . . . . . . . . . . . . . . . . 2-9 and Shipping
Personal/Safety 263-0881 Label Protection Tape . . . . . . . . . . . . . . . . . . . 2-23
239-1089 Reusable Uncorded Plugs . . . . . . . . . . . . . . . . 2-10 263-0883 Filament Tape . . . . . . . . . . . . . . . . . . . . . . . . . 2-23
Disposable Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 263-0877 Double-faced Tape . . . . . . . . . . . . . . . . . . . . . 2-23
237-8092 Corded Disposable Foam Plugs . . . . . . . . . . . 2-10 263-0879 Thread Seal Tape . . . . . . . . . . . . . . . . . . . . . . 2-23
Rad Band and Replacement Plugs . . . . . . . . . . . . . . . . . 2-10 235-8598 Electrical Tape . . . . . . . . . . . . . . . . . . . . . . . . . 2-23
233-8588 Performance Kit . . . . . . . . . . . . . . . . . . . . . . . . 2-11 263-0880 Masking Paper . . . . . . . . . . . . . . . . . . . . . . . . 2-24
233-8587 Silencer Ear Muffs . . . . . . . . . . . . . . . . . . . . . 2-11 263-0891 Poly Coat Paper . . . . . . . . . . . . . . . . . . . . . . . . 2-24
239-1088 Multipositional Ear Muff . . . . . . . . . . . . . . . . 2-11 Janitorial Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24
262-4866 High Filtration Dust Mask . . . . . . . . . . . . . . . . 2-11 Trash Can or Waste Receptacle Liners . . . . . . . . . . . . . . 2-24
239-1085 Wraparound Safety Glasses . . . . . . . . . . . . . . 2-11
Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Aviator-Style Safety Glasses . . . . . . . . . . . . . . . . . . . . . 2-12
263-0866 Zircon-Style Safety Glasses . . . . . . . . . . . . . . 2-13
262-4865 Flip-Up Protective Eyewear . . . . . . . . . . . . . . . 2-13
262-4861 Universal Clip-0n Safety Shields . . . . . . . . . . 2-13
233-8584 Safety Goggles . . . . . . . . . . . . . . . . . . . . . . . . 2-13
233-8583 Safety Goggles . . . . . . . . . . . . . . . . . . . . . . . . 2-13
263-0867 All-purpose Wipers . . . . . . . . . . . . . . . . . . . . . 2-14
239-1086 Lens Cleaning Towelettes . . . . . . . . . . . . . . . 2-14
239-1087 Lens Cleaning Station . . . . . . . . . . . . . . . . . . . 2-14
Hard Hats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
212-7530 Hard Hat Attachment Bracket . . . . . . . . . . . . . 2-15
Safety Vests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15
Abrasive Brushes
Brushes
Wire Brushes
Shop Supplies
Used to clean large metal surfaces
Remove burrs, weld scale, and rust
Good for edge blending and surface
preparation
ID: D01275T1
ID: D01221T1
Wire
Part No. Quantity Description Size Gauge RPM Arbor Length x Width Shank Material
262-9720 Brush, Cup Knot Double Row 152.4 mm (6 in) .023 6,000 5
8-11 76.2 mm x 152.4 mm (3 in x 6 in) Steel
262-9721 1 box of 10 brushes Brush End, Straight Wire 12.7 mm (12 in) .006 22,000 1
4 in Steel
262-9722 1 box of 10 brushes Brush End, Straight Wire 19 mm (34 in) .006 20,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9723 1 box of 10 brushes Brush End, Straight Wire 25.4 mm (1 in) .006 20,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9724 1 box of 10 brushes Brush Cup, Straight Wire 152.4 mm (6 in) .014 6,000 5
8-11 76.2 mm x 152.4 mm (3 in x 6 in) Steel
262-9725 Brush Cup, Knot Single Row 152.4 mm (6 in) .014 6,000 5
8-11 76.2 mm x 152.4 mm (3 in x 6 in) Steel
262-9726 1 box of 10 brushes Brush End, Straight Wire 12.7 mm (12 in) .020 22,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9727 1 box of 10 brushes Brush End, Straight Wire 19 mm (34 in) .020 20,000 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9728 1 box of 10 brushes Brush End, Straight Wire 25.4 mm (1 in) .020 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
262-9729 1 box of 10 brushes Brush End, Knot 19 mm (34 in) .014 76.2 mm x 63.5 mm (3 in x 212 in) 14 in Steel
2-1
Brushes Abrasive
ID: D00655T1
ID: D00649T1
Non-woven surface conditioning material and aluminum-oxide Part No. Size Grade Grit
abrasive flaps with cloth backing 254-5310 38 x 25 mm (1.5 x 1 in) Course 60
Epoxy filled center with 6.4 mm (.25 in) shank 254-5311 38 x 25 mm (1.5 x 1 in) Medium 120
Used to clean curved and irregular shaped parts with hard 254-5312 38 x 25 mm (1.5 x 1 in) Very Fine 240
to reach areas
254-5313 76 x 51 mm (3 x 2 in) Course 60
Use in place of wire wheels, hand scrapers, and wire brushes
254-5314 76 x 51 mm (3 x 2 in) Medium 120
Typical applications include cleaning up both hydraulic cylinders
254-5315 76 x 51 mm (3 x 2 in) Very Fine 240
and engine lower bores
Can also be used to clean rust, carbon deposits, adhesives,
and tough coatings
ID: D00631T1
2-2
Abrasive Discs
Discs
Shop Supplies
Part No Size Grade Pkg. Qty.
236-8105 114.3 x 22.23 mm (412 x 78 in) ZIR 24 10
Grind and finish in one operationgood for heavy stock removal as well 236-8106 114.3 x 22.23 mm (412 x 78 in) ZIR 36 10
as finishing reduces downtime
236-8107 114.3 x 22.23 mm (412 x 78 in) ZIR 60 10
Three popular grits ideal for iron, aluminum, stainless steel, sheet metal,
236-8109 114.3 x 22.23 mm (412 x 78 in) ZIR 80 10
copper, brass, fiberglass, masonry, and even wood
236-8111 114.3 x 22.23 mm (412 x 78 in) ZIR 120 10
Unique design allows for consistent sharp edge as wheel wears away
236-8112 152.4 x 22.23 mm (6 x 78 in) ZIR 24 10
Has a built-in angle for less operator fatigue
236-8113 152.4 x 22.23 mm (6 x 78 in) ZIR 36 10
Fiberglass reinforced backer
236-8114 152.4 x 22.23 mm (6 x 78 in) ZIR 60 10
Long lasting Zirconia grain cloth-backed flaps
236-8115 152.4 x 22.23 mm (6 x 78 in) ZIR 80 10
236-8116 152.4 x 22.23 mm (6 x 78 in) ZIR 120 10
254-5336 178 x 22.23 mm (7 x 78 in) ZIR 36 10
254-5337 178 x 22.23 mm (7 x 78 in) ZIR 60 10
254-5338 178 x 22.23 mm (7 x 78 in) ZIR 80 10
ID: D00595T1
ID: D00601T1
2-3
Discs Abrasive
Fiber Discs
Zirconium Fiber Discs with 7/8 inch Arbor Hole
Used for medium and heavy stock removal on right-angle sanding equipment for: Part No. Grit Pad Diameter Pkg. Qty. Back-up Pad
- Cutting down and blending weld lines 268-8709 1 16 114 mm (412 in) 25 254-5307
Shop Supplies
- Cutting down filler metal, rust and scale removal, as well as deburring 1U-6827 24 114 mm (412 in) 25 254-5307
Zirconium premium grain (except where noted) outlasts aluminum oxide and runs cooler 1U-6828 36 114 mm (412 in) 25 254-5307
Performs well on stainless steel and high-tensile alloys 1U-6829 50 114 mm (412 in) 25 254-5307
22 mm (7/8 in) center hole for use with 58-11 arbor (except 236-8069 which has 1U-6830 60 114 mm (412 in) 25 254-5307
16 mm (58 in) center hole) 1U-6831 80 114 mm (412 in) 25 254-5307
Resin bond with fiber backing for strength 1U-6832 100 114 mm (412 in) 25 254-5307
Used with rib-flow backup pads 254-5307, 254-5308, and 254-5309 (except for 236--8069) 1U-6833 120 114 mm (412 in) 25 254-5307
1U-6834 24 127 mm (5 in) 25 254-5308
Zirconium Alumina Vulcanized Fiber Disc with 58 inch Arbor Hole
1U-6835 36 127 mm (5 in) 25 254-5308
Part No. Grit Pad Diameter Pkg. Qty.
1U-6836 50 127 mm (5 in) 25 254-5308
236-8069 36 178 mm (7 in) 25
1U-6837 60 127 mm (5 in) 25 254-5308
1U-6838 80 127 mm (5 in) 25 254-5308
1U-6839 100 127 mm (5 in) 25 254-5308
1U-6840 120 127 mm (5 in) 25 254-5308
1U-6841 24 178 mm (7 in) 25 254-5309
1U-6842 36 178 mm (7 in) 25 254-5309
1U-6843 50 178 mm (7 in) 25 254-5309
1U-6844 60 178 mm (7 in) 25 254-5309
1U-6845 80 178 mm (7 in) 25 254-5309
1U-6846 100 178 mm (7 in) 25 254-5309
1U-6847 120 178 mm (7 in) 25 254-5309
1 268-8709 Disc is aluminum oxide grain
ID: C33515T1
ID: D01167T1
Wheels
Shop Supplies
Designed for grinding applications on ferrous metal such as grinding/smoothing
weld seams and cleaning/shaping metal surfaces
Material: aluminum oxide and resin
ID: D00787T1
ID: D00583T1
Abrasive Flap Wheels Part No. Size (diameter x thickness) Grit Pkg. Qty.
254-5321 25.4 x 25.4 mm (1 x 1 in) 60 10
254-5322 25.4 x 25.4 mm (1 x 1 in) 80 10
Aluminum-oxide coated abrasive flaps with cloth backing
254-5323 25.4 x 25.4 mm (1 x 1 in) 120 10
Delivers smooth, chatter-free grinding
254-5324 25.4 x 25.4 mm (1 x 1 in) 180 10
Use with handheld grinders
254-5325 25.4 x 25.4 mm (1 x 1 in) 240 10
Mounted on 6.35 mm (.25 in) shank
254-5326 50.8 x 25.4 mm (2 x 1 in) 60 10
Available in five popular grits and three sizes
254-5327 50.8 x 25.4 mm (2 x 1 in) 80 10
254-5328 50.8 x 25.4 mm (2 x 1 in) 120 10
254-5329 50.8 x 25.4 mm (2 x 1 in) 180 10
254-5330 50.8 x 25.4 mm (2 x 1 in) 240 10
254-5331 76.2 x 25.4 mm (3 x 1 in) 60 10
254-5332 76.2 x 25.4 mm (3 x 1 in) 80 10
ID: D00589T1 254-5333 76.2 x 25.4 mm (3 x 1 in) 120 10
254-5334 76.2 x 25.4 mm (3 x 1 in) 180 10
254-5335 76.2 x 25.4 mm (3 x 1 in) 240 10
2-5
Miscellaneous Abrasive
Miscellaneous
Every workplace has uses for non-woven nylon abrasive hand padswhenever surfaces
must be conditioned or cleaned by hand
Used to clean surfaces or remove rust, oxides, paint discoloration, and other surface contaminants
Impart and blend cosmetic finishes on metal or highlight wood finishes
Hand deburr metals and plastics quickly and economically
Used with optional 4C-4175 Hand Pad Holder
Size: 152 x 229 mm (6 x 9 in)
Part No. Description Grade Color Pkg.Qty.
241-9512 Cleaning and Finishing Fine Gray 20
8T-7751 Heavy-Duty Cleaning Medium Green 20
8T-7765 General Purpose Medium Maroon 20
8T-7752 Long Life Production Coarse Black 20 ID: D00613T1
262-9980 Heavy-Duty Aggresive Extra Coarse Tan 20
High quality, emery paper required for salvage or cleaning of numerous Caterpillar parts
Light duty, fine polishing
2-6
Abrasive Miscellaneous
Sanding Belts
Shop Supplies
Part No. Grade
262-9742 36 grit - coarse
262-9743 80 grit - medium
262-9744 120 grit - fine
262-9745 220 grit - super fine
Industrial quality
Ideal for scraping paint and glass, cutting, and trimming
Fits all standard razor blade tools
Gauge: 0.009
Quantity: 5 per package/100 per carton
ID: D01323T
2-7
Thread Inserts Metal Cutting
Thread Inserts
ID: A69887-1T1
Insert Kits
Used to repair threads of one specific size
These insert kits include inserts of one size, a driver, and installation instructions
Insert kits come in both English and metric threads
Replacement Kits
Replacement kits provide inserts for restocking
master kits such as 9S-3500, 9S-3700, 247-9662, ID: A71409T1
and 247-9663
Kits include one size insert and installation instructions
Replacements kits come in both English and metric threads
ID: A71410T1
Internal Insert Kit No. of Replacement No. of Insert Data Installation Data
Thread Part Inserts Kit Inserts External Tap Drill Drill Csink Tap Tap
No. No. Per Kit Part No. Per Kit Thread Length Dia. Part No. Dia. Size Part No.
10-24 9S-3510 15 9S-3674 45 3/ -16 7.8 mm (.31 in) Q 1U-5606 9.6 mm (.38 in) 3/ -16 1P-3025
8 8
10-32 9S-3509 15 9S-3673 45 3/ -16 7.8 mm (.31 in) Q 1U-5606 9.6 mm (.38 in) 3/ -16 1P-3025
8 8
1/ -20 9U-5053 13 9U-5054 40 7/ -14 9.4 mm (.37 in) X 1U-5610 11 mm (.44 in) 7/ -14 1P-3027
4 16 16
1/ -28 9U-5055 13 9U-5056 40 7/ -14 9.4 mm (.37 in) X 1U-5610 11 mm (.44 in) 7/ -14 1P-3027
4 16 16
5/ -18 9U-5057 8 9U-5058 25 1/ -13 11 mm (.43 in) 27/ 1U-5614 13 mm (.51 in) 1/ -13 1P-3029
16 2 64 2
5/ -24 9U-5059 8 9U-5060 25 1/ -13 11 mm (.43 in) 27/ 1U-5614 13 mm (.51 in) 1/ -13 1P-3029
16 2 64 2
3/ -16 9S-3618 6 9S-3651 20 9/ -12 13 mm (.50 in) 33/ 1U-7433 14 mm (.57 in) 9/ -12 1P-3031
8 16 64 16
3/ -24 9S-3515 6 9S-3641 20 9/ -12 13 mm (.50 in) 33/ 1U-7433 14 mm (.57 in) 9/ -12 1P-3031
8 16 64 16
7/ -14 9S-3620 6 9S-3652 18 5/ -11 16 mm (.62 in) 37/ 1U-7434 16 mm (.63 in) 5/ -11 1P-3033
16 8 64 8
7/ -20 9S-3619 6 9S-3642 18 5/ -11 16 mm (.62 in) 37/ 1U-7434 16 mm (.63 in) 5/ -11 1P-3033
16 8 64 8
1/ -13 9S-3622 5 9S-3653 15 3/ -16 16 mm (.62 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
2 4 64 4
1/ -20 9S-3621 5 9S-3643 15 3/ -16 16 mm (.62 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
2 4 64 4
9/ -12 9S-3624 3 9S-3654 10 3/ -16 20 mm (.81 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
16 4 64 4
9/ -18 9S-3623 3 9S-3644 10 3/ -16 20 mm (.81 in) 45/ 1U-7435 19 mm (.76 in) 3/ -16 1P-3036
16 4 64 4
5/ -11 9S-3626 2 9S-3655 9 7/ -14 22 mm (.87 in) 53/ 1U-7436 22 mm (.88 in) 7/ -14 1P-3038
8 8 64 8
5/ -18 9S-3625 2 9S-3645 9 7/ -14 22 mm (.87 in) 53/ 1U-7436 22 mm (.88 in) 7/ -14 1P-3038
8 8 64 8
3/ -10 9S-3628 2 9S-3656 6 11/8-12 28 mm (1.12 in) 11/16 1U-5699 29 mm (1.14 in) 11/8-12 1P-3041
4
3/ -16 9S-3627 2 9S-3646 6 11/8-12 28 mm (1.12 in) 11/16 1U-5699 29 mm (1.14 in) 11/8-12 1P-3041
4
7/ -9 9S-3630 2 9S-3657 5 11/4-12 32 mm (1.25 in) 13/16 1U-5703 32 mm (1.27 in) 11/4-12 1P-3042
8
7/ -14 9S-3629 2 9S-3647 5 11/4-12 32 mm (1.25 in) 13/16 1U-5703 32 mm (1.27 in) 11/4-12 1P-3042
8
1-8 9S-3632 2 9S-3658 4 13/8-12 35 mm (1.37 in) 15/16 1U-5707 35 mm (1.39 in) 13/8-12 1P-3043
1-14 9S-3631 2 9S-3648 4 13/8-12 35 mm (1.37 in) 15/16 1U-5707 35 mm (1.39 in) 13/8-12 1P-3043
2-8
Metal Cutting / Hardware / Thread Inserts / Check-a Thread /
Chem/Lube/Adhesives Solvents/Lubricants
Internal Insert Kit No. of Replacement No. of Insert Data Installation Data
Thread Part Inserts Kit Inserts External Tap Drill Drill Csink Tap Tap
No. No. Per Kit Part No. Per Kit Thread Length Dia. Part No. Dia. Size Part No.
11/8-7 9S-3633 2 9S-3675 3 11/2-12 41 mm (1.62 in) 17/16 1U-5711 39 mm (1.52 in) 11/2-12 1P-3044
11/8-12 9S-3634 2 9S-3676 3 11/2-12 41 mm (1.62 in) 17/16 1U-5711 39 mm (1.52 in) 11/2-12 1P-3044
11/4-7 9S-3635 2 9S-3677 2 15/8-12 46 mm (1.81 in) 19/16 1U-7437 41 mm (1.62 in) 15/8-12
Shop Supplies
11/4-12 9S-3636 2 9S-3678 2 15/8-12 46 mm (1.81 in) 19/16 1U-7437 41 mm (1.62 in) 15/8-12
11/2-6 9S-3637 2 9S-3679 2 17/8-12 51 mm (2.00 in) 113/16 1U-7438 48 mm (1.89 in) 17/8-12
11/2-12 9S-3638 2 9S-3680 2 17/8-12 51 mm (2.00 in) 113/16 1U-7438 48 mm (1.89 in) 17/8-12
M6-1 246-7511 10 246-7520 25 M10-1.25 10 mm (.39 in) 8.8 mm 1U-8165 10.25 mm (.40 in) M10-1.25 8T-3086
M8-1.25 246-7513 10 246-7521 25 M12-1.25 12 mm (.47 in) 10.8 mm 1U-8169 12.25 mm (.48 in) M12-1.25 8T-3089
M10-1.5 246-7514 10 246-7522 20 M14-1.5 14 mm (.55 in) 12.8 mm 1U-8173 14.25 mm (.56 in) M14-1.5 8T-3093
M10-1.25 246-7515 5 246-7523 10 M14-1.5 14 mm (.55 in) 12.8 mm 1U-8173 14.25 mm (.56 in) M14-1.5 8T-3093
M12-1.75 246-7516 5 246-7524 10 M16-1.5 16 mm (.63 in) 14.7 mm 1U-8177 16.25 mm (.64 in) M16-1.5 8T-3095
M16-2 246-7517 3 246-7525 5 M22-1.5 22 mm (.87 in) 20.5 mm 22.25 mm (.87 in) M22-1.5 156-8166
M20-2.5 246-7518 3 246-7526 5 M30-2 30 mm (1.18 in) 28 mm 1U-8194 30.25 mm (1.19 in) M30-2
M24-3 246-7519 2 246-7528 5 M33-2 33 mm (1.30 in) 31 mm 33.25 mm (1.31 in) M33-2
Reference
Special Instruction SEHS8792; Using Caterpillar Replacement Thread Inserts
Hardware
Check-a-Thread
Solvents/Lubricants
ID: D01317T1
2-9
Personal Protection Items Personal/Safety
Compliant
Super-soft washable reusable plugs
Flip-top case included
Non-toxic FDA-approved material
Excellent protection at 28dB ID: D00244T1
Package quantity: 1
Disposable Plugs
Compliant
Bell-shaped polyurethane foam for maximum comfort
Smooth soil-resistant skin
Noise reduction rating: 33dB
Color: neon
Part No. Description Quantity
260-4783 Uncorded Disposable Plugs 200 per box/10 boxes per case
260-4785 Corded Disposable Plugs 100 per box/10 boxes per case
ID: D01161T1
Compliant
Tapered disposable plug for excellent fit
Light comfortable foam
Smooth surface to repel dirt
Corded for long wear and cost savings
Excellent protection at 29dB
Package quantity: 1
ID: D00250T1
Compliant
Part No. Description
High-density construction, lightweight and durable
233-8585 Rad Band
Non-toxic FDA approved material earplugs
233-8586 Replacement Plugs
Comfortable and cool on hot days
Noise reduction rating: 23dB
Engineered angled earplug for maximum sound protection and comfort
ID: D00262T1
Package quantity: 1
2-10
Personal/Safety Personal Protection Items
Compliant Compliant
Comfortable adjustable padded headband
Shop Supplies
Soft foam padded earcupscomfortable when wearing with glasses
Rugged and lightweight
Dielectric
Excellent protection at NRR26
Consists of
Package
Part No. Description Quantity ID: D002681
233-8580 Glasses 1
233-8587 Ear Muffs 1 ID: D00256T1
ID: D01209T1
ID: D00184T1
Compliant
Visitor disposable safety glasses
Can be worn over prescription glasses
99.9% UVA and UVB protection
Meets or exceeds all ANSI, CSA, and CE specifications
Package quantity: 1
ID: D00274T1
2-11
Personal Protection Items Personal/Safety
Safety Glasses
Lens
Part No. Type
Compliant 233-8576 Clear (packaged for retail)
233-8577 Clear
Sporty wraparound look
Shop Supplies
ID: D00190T1
Safety Glasses
Part No. Lens Type
233-8580 Gray (packaged for retail)
Compliant 249-7265 Clear (packaged for industrial; 12 per package)
5-position ratchet and 4-position telescoping temples
Soft non-slip rubber nosepiece
Anti-scratch hard-coated lenses
99.9% UVA and UVB protection
Ventilation between lens and frame
Meets or exceeds all ANSI, CSA, and CE specifications
Package quantity: 1
ID: D00280T1
ID: D00286T1
Zircon-style safety glasses feature a contoured impact resistant Classic flip-up style offers versatility for workers in unique environments
polycarbonate lens Welding shade: 5.0 (for gas welding and brazing)
Shop Supplies
Black wrap a round frame with a soft nose piece Clear impact resistant polycarbonate lenses in safety glasses meets
Stylish one-piece lens provides a wide field of vision ANSI Z87.1-1989
Dark green tinted lens absorbs 99% of harmful UV rays Opaque black frame with molded in-brow guard
Meets ANSI Z87.1-2003 impact standards Sideshields for extra protection against flying particles
Package quantity: 1 pair Lens have a scratch resistant hard coat for longer life
Package quantity: 1 pair
ID: D00196T1
Compliant
Perforated goggle with excellent ventilation and protection
Fits over most prescription eyeware
Clear optical-grade polycarbonate lens
Adjustable headband
Meets or exceeds all ANSI, CSA, and CE specifications
Package quantity: 1
ID: D00292T1
2-13
Personal Protection Items Personal/Safety
Size: 127 mm x 203 mm (5 in x 8 in) wipers Can be used on plastic, glass and polycarbonate lenses,
Quantity: 300 tissues per box, face shields, and goggles
60 boxes per case Towelettes are pre-moistened with anti-fog,
anti-static formula
Individually foil wrapped towelettes are
great for service trucks and tool boxes
Dispenser features pull out bottom for easy
dispensing and built in tab for hanging
Each dispenser contains (100)
127 mm x 203 mm (5 in x 8 in) towelettes
ID: D01407T1
ID: D01257T1
Compliant
May be used on safety glasses, face shields, goggles, and full face respirators
Economical lens cleaning station provide lens cleaning needs in shop or office
Promotes proper lens cleaning, extending life of safety glasses
Specially formulated solution cleans greasy and oily glasses while providing an anti-fog/anti-static coating
Low lint non-abrasive tissues leave lenses clear and streak free
Easily mounted on wall or table top
Each station contains 8 oz. anti-fog/anti-static solution and 600 low lint, non-abrasive tissues
ID: D01263T1
Hard Hats
Warranty: Manufacturers
Compliant
Replaces canceled 173-1941 Protective Hard Hat, White and 173-1942 Protective Hard Hat, Yellow
High density, polyethylene protective hard hats with Cat logo
Self-sizing, four-point suspension with brow pad
Rain trough brim provides extra protection against snow, rain, dust, and dirt
Accessory slots provide attachment points for earmuffs, face shields, flashlights, etc.
239-4964 and 239-4966 meets or exceeds ANSI Z89.1-1997 Standard for Industrial Head Protection,
Type 1, Class E, helmet requirements
239-4965 and 239-4967 meets or exceeds EN 397:1995 Amendment (A1 2000 Standard) for
Industrial Safety Helmets, Optional Classes -20 degrees C, 440 VAC requirements
ID: D00385T1
2-14
Personal/Safety Personal Protection Items
Shop Supplies
Bracket attaches directly to hard hat (hard hat not included)
Uses a 249-0661 Clear Acetate Visor or 258-2357 Green Acetate Visor (not included)
ID: C80586T1
Safety Vests
Tyvek Coveralls
ID: D00697T1
2-15
Hand Protection Gloves Personal/Safety
Full grain leather used on entire palm area, ensuring Free Flex Neoprene Shock-absorbing palm padding
knuckle and index finger protection Tough spandex top material resists snags
3 mm shock-absorbing Gel palm padding Part No. Size Good fit and great finger dexterity for intricate tasks
Single pair 247-2911 Medium Bulk - 5 pair
247-2912 Large
247-2913 Extra Large
247-2914 XX Large
ID: D00934T1
ID: D01149T1
ID: D00832T1
2-16
Personal/Safety Hand Protection Gloves
Shop Supplies
246-5147 Extra Large Single Pair
Elastic shirred back holds glove securely to hand 246-5152 Medium Bulk - 12 Pair
Gunn cut pattern 246-5150 Large Bulk - 12 Pair
246-5148 Extra Large Bulk - 12 Pair
ID: D00838T1
For drivers, utility and warehouse workers; light welding For tough rugged jobs
Elastic shirred back holds glove securely to hand Full leather index finger
Gunn cut pattern Lined palm and leather tips
Gauntlet cuff style
Part No. Size Quantity Elastic on back with knuckle strap
246-5153 Large Single Pair
246-5154 Large Bulk - 12 pair
Grain leather palm with palm patch For medium- to heavy-duty work
Gunn cut Gunn cut pattern
Water-proof safety cuff Full leather index finger
Wing thumb Wing thumb
Full leather index finger and tips with elastic
Size: mens large
ID: D00856T1
Part No. Size Quantity
246-5159 Medium Single Pair
246-5157 Large Single Pair
246-5161 Extra Large Single Pair
246-5160 Medium Bulk - 12 Pair
246-5158 Large Bulk - 12 Pair
246-5162 Extra Large Bulk - 12 Pair
ID: D01155T1
2-17
Hand Protection Gloves Personal/Safety
ID: D00868T1
ID: D00874T1
One piece back fully welted For working with acids, solvents, oils, caustics and greases
Color: gold High cut resistance compared to rubber and vinyl
Good from 46C to 149C (-50F to 300F)
Part No. Size Quantity
Size: large
185-0153 Medium Bulk - 12 Pair
Single pair
247-4447 Large Single Pair
247-6410 Large Bulk - 12 Pair
ID: D00904T1
2-18
Personal/Safety Hand Protection Gloves /
Chemical Spill Protection
Shop Supplies
Resistant to punctures Excellent sensitivity touch
and chemicals Seamless construction
Fits either hand Rubber latex
100 per box, 6 mil thick, 241.3 mm (9 12 in) long 100 per box, 5 mil thick,
ID: D00916T1 10 in long
Powdered Powder-Free Part No. Size
Part No. Size Part No. Size 260-1777 Small
ID: D00922T1
260-1776 Small 260-1802 Small 260-1778 Medium
259-7005 Medium 259-7007 Medium 246-5181 Large
246-5179 Large 246-5180 Large 260-1779 Extra Large
259-7006 Extra Large 259-7008 Extra Large
Exclusive micro-webs absorbs up to 100% more oil than other leading melt-blown oil absorbents
Improved absorbency means more liquid pickup, with less product, which can result in lower costs for the user
Very little lint to minimize contamination
One bale picks up an average of 25 gallons of oil
Comes as one bale of 50, 43.2 x 48.3 cm (17 x 19 in) pads
ID: C41257T1
Absorbent Socks
Warranty: Manufacturers
Tubular absorbent socks absorb and contain leaks and spills around machinery (hydraulic oil, coolants,
non-aggressive fluids, water, and even hazardous fluids, such as PCB oils and solvents)
Superior diking and damming capability (hugs the floor, creating an effective barrier or dike that holds
back fluids, in emergency situations, even after total absorption)
Used primarily for everyday housekeeping around machines that leak, seep, or spill fluids
Fits snugly against machine bases and wrap-around corners, keeping work area safe and dry
Fine-grade vermiculite filler (non-biodegradable) quickly soaks up leaks and drips
Self-contained, no messy cleanup (no loose absorbents to spread, sweep, scatter, shovel, or track around) ID: D00476T1
Durable, stitch-bonded polypropylene skin improves strength
Quantity Absorption Absorption Size Shipping
Reusable for water spills only Part No. Per Box Per Box Per Sock (diameter x length) Weight
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors 235-0844 40 113 l (30 gal) 2.8 l (.7 gal) 75 mm (3 in) x
Material Safety Data Sheets (MSDS) available 121 cm (48 in) 23 kg (50 lbs)
254-3969 8 57 l (15 gal) 6.8 l (1.8 gal) 75 mm (3 in) x
Reference 3 m (10 ft) 11 kg (25 lbs)
NELG5036
2-19
Chemical Spill Protection Personal/Safety
Heavyweight Absorbent Material for Most Oil, Water-Based Fluids, and Chemicals
Warranty: Manufacturers
Heavyweight, gray, absorbent material designed to absorb chemicals, solvents, oils, coolants, petroleum products, water, water-based fluids, and even acids and bases
Multiple uses in maintenance, repair, and operating (MRO) areas; cover areas prone to overspray and spills, leaving a cleaner, safer work area; ideal for heavy,
Shop Supplies
concentrated machine leaks and large, spreading spills; keep floors and walk areas safer by absorbing leaks, spills, drips, and overspray
Dark gray color hides dirt and grime of foot traffic
Thin profile slides into hard-to-reach areas
Made from flame-resistant material which can be used around spark-prone areas, such as welding or grinding equipment
Material will not degrade or have a chemical reaction to a wide variety of chemicals and strong solvents
Absorbs 10 times its weight, reducing material purchase and disposal costs
Dimple design helps absorb more liquid in less time (material retains liquid,
even when fully saturated)
Roll material cuts easily with scissors or razor knife easily shaped to fit virtually any area
Material: 100% polypropylene
Multiple layers are held together with thermal bond points for added strength and
durabilitywill not fall apart or
leave behind residue, even when fully saturated
235-0848 is packaged in convenient, easy-to-carry dispenser box
235-0866 and 235-0868 are sold overseas only (not available in North American markets)
Meets OSHA regulation 29 CFR 1910.22(a)(2) for dry and clean workplace floors
ID: D00483T1
Material Safety Data Sheets (MSDS) available
ID: D01371T1
2-20
Personal/Safety Chemical Spill Protection /
Miscellaneous
Shop Supplies
Absorbency 125 l (33 gal) per bag
Absorbs a wide range of chemicals without degrading or causing a dangerous
Length 46 m (150 ft)
chemical reaction
Width 61 cm (24 in)
High-visibility yellow color alerts workers to potential dangers where work
or repairs are taking place Weight 10.9 kg (24 lbs)
Flame-resistant safe for spark-prone areas such as welding robots Material 100% polypropylene
Comes with a variety of socks and pillows along with a roll of universal mat Ply 8
Low profile slides into hard-to-reach areas
ID: D01365T1
Miscellaneous
ID: D00970T1
ID D00964T1
2-21
Miscellaneous Personal/Safety
Towels compressed on roll so more towels fit in same space no sacrifice Two-piece construction with tightly rolled rim
in performance, change roll less often Fully wax coated inside and out with a satin finish
Shop Supplies
ID: D01185T1
ID: D01251T1
Film Guard
ID: D01173T1
2-22
Material Handling, Storage, Tape and Tape Dispensers
Packaging, and Shipping
Shop Supplies
Used for covering address labels, packing lists, and sales slips when protection against rough handling is needed
Aggressive water-based acrylic adhesive
Resistant to UV light and chemicals
Adhesion to steel: 17.9 N/cm (16 oz/in)
Tensile strength: 0.32 kg/mm (18 lb/in)
Thickness: 0.04 mm (1.6 mils)
Size: 96.01 mm x 659.9 m (3.78 in x 216.5 feet) roll
Material: polypropylene
Package quantity: 18 rolls per case
ID: D01203T1
Fiberglass reinforced tape excellent for light-duty applications such Multipurpose tape for general mounting and holding
as strapping, palletizing, and packaging Can be used to reattach interior cab material or head liners, sound
Adhesion to steel: 8.5 g/mm (78 oz/in) proofing material, etc.
Elongation: 8% Extremely aggressive adhesive
Tack: 12.7 cm (5 in) Silicone-coated polyethylene release liner makes unwinding easy
Tensile strength: 1.71 kg/mm (95.6 lb/in) Peels clean leaving minimum residue
Thickness: 0.099 mm (3.9 mils) Adhesion to steel: 44 g/mm (40 oz/in)
Size: 8.89 mm x 548.64 m (0.35 in x 180 feet) Tack: 5.1 cm (2 in)
Package quantity: 96 rolls per case Tensile strength:
0.36 kg/mm (20 lb/in)
Thickness: 0.28 mm (11 mils)
Size: 51 mm x 22.9 m
(2 in x 25 yards) roll
Package quantity: 24 rolls per case
ID: D01395T1
ID: D01401T1
Multipurpose non-adhesive thread seal tape used for many Quality, black, vinyl tape with excellent electrical insulation properties
maintenance applications Size: 19 mm x 18.3 m long (34 in wide x 60 ft long)
Polytetraflouroethylene (PTFE) self lubricates Package quantity: 10
joints for a leak-proof seal
Easy to assemble and disassemble threaded
joints when tape is applied
Thickness: 0.09 mm (3.5 mils)
Size: 13 mm x 76.2 m (0.5 in x 250 feet) roll
Color: white
Material: polytetraflouroethylene
Package quantity: 200 rolls per case
ID: D01389T1
ID: D00935T1
2-23
Package Material and Accessories / Material Handling, Storage,
Janitorial Products Packaging, and Shipping
Excellent adhesion to all masking tapes Used for protecting metal parts and tools, metal sheeting interleaving,
Standard production grade 40 pound basis weight, pinhole free protecting goods on pallets from moisture and debris
One inch core fits standard masking paper dispensers Fifty pound virgin kraft paper with 10 pound polycoating
Size: 914.4 mm x 304.8 m (36 in x 1000 feet) roll Heavy duty protection from water, grease, and oil
Withstands oven temperatures of 325 F Fits standard dispenser 3-inch core with plugs that reduce it to 1 inch
Color: green Size: 914.4 mm x 274.3 m (36 in x 900 feet) roll
ID: D01335T1
ID: D01179T1
Janitorial Products
Janitorial Equipment
Janitorial Bucket
Side pressure wringer
7.6 cm (3 in) casters
Color: yellow
Size: (L x W x H) 33 x 33 x 68.6 cm (13 x 13 x 27 in)
Mop Heads
Lay-flat style
Screw-type mount
Use with 264-4364 Mop Handle
ID: D00685T1
Mop Handle
Part No. Description Material Size Qty.
Lay-flat style
264-4360 Janitorial Bucket rubber 33.1 l (35 qt) capacity 1
Screw-type mount
264-4361 Rayon Mop Head 4-ply rayon 0.9 kg (32 oz) 1
Metal cap
264-4363 Cotton Mop Head 4-ply cotton 0.68 kg (24 oz) 1
264-4364 Mop Handle hardwood 152.4 cm (60 in) long 1
Plastic, super durable trash can liners with superior stretch and tear resistance
Bottom designed for added strength and greater leak resistance
Quantity
Part No. Strength Capacity Liner Size per Roll
263-0885 Medium 57 l 60.96 cm x 81.28 cm 500
(10-12 micron) (15 gal) (24 in x 32 in)
263-0886 Heavy 125 l 83.82 cm x 99.06 cm 250
(12-14 micron) (33 gal) (33 in x 39 in)
263-0887 Extra-Heavy 208 l 91.44 cm x 144.78 cm 200
(15-17 micron) (55 gal) (36 in x 57 in)
ID: D01197T1
2-24
Shop Equipment
Vises
Tradesman Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Slings
Load Positioners and Warning Tag . . . . . . . . . . . . . . . . . 3-1
Link Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Fabric Slings, Protective Sleeve, and Shackles . . . . . . . 3-2
Nylon Lifting Slings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
5P-4153 Sling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Lubricating Equipment
241-0706 Grease Gun Group with 2 batteries . . . . . . . . 3-5
194-3560 Grease Gun Group with 1 battery . . . . . . . . . . 3-5
194-3561 Battery, Rechargeable . . . . . . . . . . . . . . . . . . . 3-5
Lighting/Electrical Products
238-8244 Pen Light, White LED . . . . . . . . . . . . . . . . . . . 3-5
269-3123 Pen Light, Blue LED . . . . . . . . . . . . . . . . . . . . . 3-5
Industrial Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
261-0022 Hi-Energy Battery Charger . . . . . . . . . . . . . . . 3-6
261-0024 AA Rechargeable Batteries . . . . . . . . . . . . . . 3-6
261-8322 Surge Suppression Plug Strip . . . . . . . . . . . . . 3-6
Heavy-duty Contractor and Industrial Application
Extension Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Cable Ties and Applicators . . . . . . . . . . . . . . . . . . . . . . . 3-7
Casting Salvage
Full-Torque Thread Repair Kits . . . . . . . . . . . . . . . . . . . 3-8
263-7147 Lock-N-Stitch Crack Repair Kit . . . . . . . . . . . 3-9
Vises / Slings
Vises
Tradesman Vises
Shop Equipment
Warranty: Manufacturers
Replaceable, hardened steel serrated jaw inserts and replaceable pipe jaws
Precision, machined keyed slide bar
Built for maximum quality and performance
Straight line design means no wear on spindle or nut
360 swivel base, double lockdowns
Side play eliminated by precision machined slide bar keyed for precision
Fully enclosed design keeps dirt and contaminants out
ID: C33302T1
233-8147 6 in 1 in-312 in 418 in 534 in 64 lb 236-2648 236-2656 188-2145 512 in 188-2167 4C-4400
4
188-2163 8 in 1 in-312 in 434 in 7 in 109 lb 188-2171 188-2752 188-2147 612 in 188-2170 4C-4400
8
Slings
Compliant
Load Positioners
Used with a crane or hoist
Useful for tilting heavy or bulky assemblies in confined areas
Not for use in overhead lifting
138-7575 Link Bracket (two) is part of 9S-9101 and 9S-9100
ID: C80390T1
3-1
Slings
Link Brackets
SMCS Code: 7063-017, 7063-010, 0632
Model: 5000 Series Mining Excavators and General Usage
Shop Equipment
Used to remove or install large components such as excavator swing gears (provides
acceptable method of attaching hoist to component)
138-7575 Link Bracket is used specifically to remove and install swing gear and bearing
assembly on 5130 and 5230 Mining Excavators
All link brackets meet ANSI Standards for lifting devices.
Bolts directly onto swing bearing/gear or other component (always use Grade 8 bolts
to attach link bracket to component)
Requires less clearance than standard eye bolt and makes placement/alignment
of swing gear/bearing much faster and simpler
Used for any general purpose lifting where bracket can be attached to component ID: C66834T1
These link brackets are 100% proof tested at two times the working load limit.
They comply with the requirements of ANSI/ASME B30.9-1984 as noted on the Working Minimum
Part No. Bolt Size Load Limit Bolt Torque
Certificate of Proof Test contained with each piece.
163-6455 36 mm 5448 kg (12,000 lbs) 2700 Nm (2000 lb ft)
138-7576 30 mm (114 in) 4000 kg (9000 lbs) 1300 Nm (1300 lb ft)
Reference 138-7574 (34 in) 4000 kg (9000 lbs) 360 Nm (265 lb ft)
SEHS9721 Special Instruction, Assembly Procedure for Hydraulic Excavator (5130 only) 138-7575 (12 in) 1800 kg (4000 lbs) 95 Nm (70 lb ft)
138-7573 (38 in) 1000 kg (2250 lbs) 43 Nm (32 lb ft)
3-2
Slings
Lifting Capacity
Part No. Description Length Width Vertical Basket Choker
140-7738 1 Fabric Sling 2.4 m (8.0 ft) 100 mm (4.0 in) 9,000 kg (20,000 lb) 18,000 kg (40,000 lb) 7,200 kg (16,000 lb)
141-0288 2 Fabric Sling 2.4 m (8.0 ft) 100 mm (4.0 in) 9,000 kg (20,000 lb) 18,000 kg (40,000 lb) 7,200 kg (16,000 lb)
140-7741 1 Fabric Sling 2.4 m (8.0 ft) 75 mm (3.0 in) 4,500 kg (10,000 lb) 9,000 kg (20,000 lb) 3,600 kg (8,000 lb)
Shop Equipment
141-0289 2 Fabric Sling 2.4 m (8.0 ft) 75 mm (3.0 in) 4,500 kg (10,000 lb) 9,000 kg (20,000 lb) 3,600 kg (8,000 lb)
140-7742 3 Protective Sleeve 600 mm (24.0 in) 250 mm (10.0 in)
1 Foruse in all markets except Europe and Australia
2 Required for use in Europe and Australia
3 Recommended for use with all Fiber Slings
143-8695 Shackle (Synthetic Sling Saver) 143-8698 Shackle Spool 143-8699 Shackle Link Plate
Working load limit 18,600 kg (41,000 lb) (Synthetic Sling Saver) (Synthetic Sling Saver)
Throat width 54 mm (2.1 in) Outside diameter 63.5 mm (2.5 in) Working load limit 18,600 kg (41,000 lb)
Outside length 248 mm (9.8 in) Width 47.8 mm (1.88 in) Thickness 44.5 mm (1.75 in)
Maximum sling width 114 mm (4.5 in) Inside diameter 41.4 mm (1.63 in) Width 76.2 mm (3.0 in)
Inside depth 146 mm (5.8 in) Weight 1.3 kg (2.8 lb) Length 177.8 mm (7.0 in)
Outside width 191 mm (7.5 in) Material alloy steel Hole diameter 41.2 mm (1.62 in)
Pin diameter 38 mm (1.5 in) Distance between holes 95.2 mm (3.75 in)
Weight 8.5 kg (18.7 lb) Weight 4.8 kg (10.6 lb)
Material Alloy steel with Material alloy steel
threaded screw pin
Fiber Optic
Tell Tail Cord
143-8699
140-7742 143-8698
ID: C78495T1
ID: C78496T1
Reference
Special Instruction: REHS0033, 777D Off-Highway Truck; SEHS9980,
793C Off-Highway Truck; SEHS9992, 769D/771D Off-Highway Truck;
SEHS9993 773D/775D Off-Highway Truck
3-3
Slings
WARNING
Inspect sling for damage before each use and remove from service if damaged. Do not overload, cut, or expose to temperatures above 82C (180F). Use of
damaged sling may result in personal injury.
Rated Rated
Sling Eye No. of Capacity Sling Eye No. of Capacity
Part No. Length Width Length Body Plys Choker Vertical Basket Part No. Length Width Length Body Plys Choker Vertical Basket
Endless Slings (Type V) Eye and Eye Slings (Type III)
1U-8221 3 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb 1U-8234 3 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8222 4 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb 1U-8235 4 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8223 6 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb 1U-8236 6 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8224 8 ft 1 in 1 2,480 lb 3,100 lb 6,200 lb 1U-8237 8 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8225 6 ft 2 in 1 4,960 lb 6,200 lb 12,400 lb 1U-8238 10 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8226 8 ft 2 in 1 4,960 lb 6,200 lb 12,400 lb 1U-8239 12 ft 1 in 8 in 1 1,240 lb 1,550 lb 3,100 lb
1U-8227 10 ft 2 in 1 4,960 lb 6,200 lb 12,400 lb 1U-8240 4 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8228 6 ft 3 in 1 7,440 lb 9,300 lb 18,600 lb 1U-8241 6 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8229 8 ft 3 in 1 7,440 lb 9,300 lb 18,600 lb 1U-8242 8 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8230 10 ft 3 in 1 7,440 lb 9,300 lb 18,600 lb 1U-8243 10 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8231 8 ft 4 in 1 9,920 lb 12,400 lb 24,800 lb 1U-8244 12 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8232 10 ft 4 in 1 9,920 lb 12,400 lb 24,800 lb 1U-8245 14 ft 2 in 8 in 1 2,480 lb 3,100 lb 6,220 lb
1U-8233 12 ft 4 in 1 9,920 lb 12,400 lb 24,800 lb 1U-8256 6 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
1U-8257 8 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
1U-8258 10 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
1U-8259 12 ft 2 in 8 in 2 4,960 lb 6,200 lb 12,400 lb
5P-4153 Sling
SMCS Code: 4200-010
Model: Most Caterpillar Models
Used to properly lift and handle Caterpillar beadless carcass or conventional tires
Single-ply, webbed nylon sling with many general purpose usages
ID: A10264T1
Lifting Capacity
Choker hitch 2300 kg (5,200 lbs.)
Basket hitch 4500 kg (10,000 lbs.)
3-4
Lubricating Equipment / Grease Guns / Flashlights and Batteries
Lighting/Electrical Products
Lubricating Equipment
Shop Equipment
194-3560 Grease Gun Group with 1 battery
194-3561 Battery, Rechargeable
Warranty: Manufacturers
12 Volt cordless, rechargeable grease gun Three-way loading to fit your needs and equipment
Custom carrying case holds grease gun with battery, battery charger, and (suction, filler pump, and cartridge)
two grease cartridges (grease not included) Uses standard 14 ounce cartridges
12 Volt motor delivers consistent grease flow up to 41368 kPa (6000 PSI) Comes with a 76 cm (30.0 in) flex hose with spring guards
Works great in construction and agricultural field conditions One hour fast charge charges batteries quickly; trickle charge keeps
Provides faster, more effective lubrication (reduces mechanics fatigue batteries fully charged when placed in charger
when lubricating large numbers of grease fittings) Replacement or additional 194-3561 Batteries can be ordered separately
Motor 12 Volt
Battery high-capacity, 12 Volt NiCad
Pressure capacity 41368 kPa (6000 PSI)
Charge time 1 hour (110 V, 60 Hz)
Front outlet fitting 7 inch UNEF
16
Compliant
Made from tempered aircraft aluminum
100,00 hour lifetime, hi-intensity light emitting diode (LED) bulb
Batteries last up to 60 hours
Includes 3 AAAA batteries
ID: D00929T1
Handy shirt clip
Push end of pen light to momentarily illuminate or twist end clockwise for constant on
Waterproof
3-5
Flashlights and Batteries Lighting/Electrical Products
Industrial Batteries
Warranty: Manufacturers Pkg. Pkg.
Size Alkaline Qty. Heavy-Duty Qty.
Shop Equipment
ID: D00690T1
ID: D01377T1
ID: D01383T1
3-6
Lighting/Electrical Products Worklights and Extension Cords /
Cable Ties
Shop Equipment
Designed for heavy-duty use by contractors and industrial applications
Outer jacket protects against rough handling and extreme weather conditions 1
Provides superior resistance to sunlight, ozone, cracking, oils chemicals, and moisture
All cords have CAT logo printed on cord
All extension cords are UL (Underwriters Laboratory) listed and meet OSHA
(Office of Safety and Health Administration) requirements
All plugs and outlets are NEMA (National Electrical Manufacturers Association)
designated 5-15P plug and 5-15R outlet
2
ID: C79360T1
Miscellaneous
ID: C44294T1
3-7
Casting Salvage
Casting Salvage
Unique threaded insert design repairs damaged threaded holes in cast and ductile iron, steel, and aluminum
Spiralhook threads engage tapped hole and draw surrounding metal into threads, as bolt or stud is torqued,
resulting in a stronger repair
Thread Repair Solid Plug inserts allow off-center and custom-size thread repairs
Viable alternative to welding cast and ductile iron, steel, and aluminum
In many cases parts can be repaired without disassembly
Six kits with individual written installation instructions for a wide range of repair solutions
263-7140
1-8 Thread Insert Kit for ductile iron in Off-Highway Truck and Wheel
Loader wheels; can also be used on steel fabricated and cast wheels D00436T1
263-7141 263-7145
M24 Thread Insert Kit for ductile iron in Off-Highway Truck and Wheel M20 Thread Insert Kit for repair of 3116 block head bolt holes
Loader wheels; can also be used on steel fabricated and cast wheels
Part No. Description Quantity
Part No. Description Quantity
9
263-7180 Drill Bit, 5764 inch 1
263-7160 Drill Bit, 1 64 inch 1
263-7181 Rough Tap 1
263-7161 Rough Tap 1
263-7182 Finish Tap 1
263-7162 Finish Tap 1
263-7183 Installation Tool 1
263-7167 Installation Tool 1
263-7174 Thread Insert, M20 5
263-7168 Thread Insert, M24 5
263-7144 263-7142
M36 Thread Insert Kit for ductile iron housing on 797 Off-Highway Truck M30 Thread Insert Kit for ductile iron housing on 797 Off-Highway Truck wheels
wheels; also used for repairing 797 front axle steering bracket mounting holes
Part No. Description Quantity
Part No. Description Quantity 263-7178 Drill Bit, 1 2564 inch 1
263-7172 Drill Bit, 1 4164 inch 1 263-7179 Drill Fixture 1
263-7179 Drill Fixture 1 263-7157 Rough Tap 1
263-7155 Rough Tap 1 263-7158 Finish Tap 1
263-7156 Finish Tap 1 263-7165 Installation Tool 1
263-7163 Installation Tool 1 263-7173 Thread Insert, M30 5
263-7164 Thread Insert, M36 5
263-7146
Thread Repair Solid Plug Insert Kit for drilling and tapping off-center and
custom-size threaded holes1; used for repairing 797 differential retaining
bolt holes in thrust washer halves
ID: D00448T1
3-8
Casting Salvage
Unique threaded stitching pins and locks repair cracks in cast and ductile iron, steel, or aluminum castings
Shop Equipment
L-Series Stitching Pins use an interference fit to seal pressure tight and can be installed at steep angles
C-Series Stitching Pins feature SpiralhookTM threads to produce drawing pressure that pulls sides of the crack together for strength
Locks installed across a crack; drill jigs create precise hole patterns across cracks in castings; locks driven into hole patterns creating additional strength
Cold process viable alternative to welding
In many cases parts can be repaired without disassembly Tools
Extensive kit features specialized tools, complete instructions including six DVDs Part No. Description Quantity
covering all aspects of crack repair, and storage case
263-7184 Magcheck Kit 1
Provides a wide range of repair solutions
263-7190 Pneumatic Tapping Tool 1
263-7253 Large Collet for 263-7190 1
263-7254 Quick Change Tap Adapter 1
263-7249 Trim-Kut 3 inch Discs (includes 14 inch mandrel) 10
3-9