Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Type NCX
Outdoor cutout
Product features
7.8/15 kV, 15 kV, 15/27 kV, 20/34.5 kV, 27 kV, and 38 kV
110, 125, 150, and 200 kV BIL
100 A, 200 A fused
300 A disconnect blade
Porcelain, polymer concrete, or silicone insulators available
Cutout/arrester combo
Description
The NCX cutout has a long history of providing safe, reliable
overcurrent protection to the industry. The NCX design
provides overcurrent protection for equipment that may be
damaged by system overload or fault conditions. Porcelain,
polymer concrete, or silicone insulators and cutout/arrester
combinations are available on certain models.
Ratings
The NCX is offered in several frame sizes to properly match each
system BIL. Each fuse support has universal contacts that
accommodate a 100 A fuseholder, a 200 A fuseholder, or a 300 A
disconnect blade.
Design features
The 100 A fuseholder will accommodate standard or removable Link extender caps can be utilized for design configurations
buttonhead-type fuse links rated from 1 A to 100 A. The 200 which require single venting. The link extender positions the
A fuseholder accommodates fuse links rated from 140 A to fusible element lower inside the fuse tube, thereby reducing
200 A. The selection of the appropriate fuse link size and type the amount of pressure which can build up in the tube. The net
for a particular application is a function of the continuous load effect gives the tube a higher interrupting rating.
current to be carried, the type of equipment to be protected,
and the required coordination with other overcurrent protective Standards and design testing
equipment. Types of protective equipment include circuit The NCX cutout meets or exceeds all applicable requirements of
breakers, power reclosers, and other fused cutouts. EEI, NEMA SG-2, and IEEE C37.41 and C37.42 standards.
Unit dimensions
A .375 "B" BRKT.
B .312 "A" BRKT.
C 2.63
[67]
3.00 [76]
7.75
TO
[197]
4.00 [102]
1.56 [40]
FR
.81
[21]
Bracket dimensions
9.1
7.8 7.8 12.8 [231]
7.8 [325]
[198] [198] [198]
1.5
1.6 1.6 [38]
[40] [40]
DIGIT 4 DIGIT 6
Terminal Connectors Special Options
N = No terminal N = None
C = Clamshell
E = Eyebolt
W 1 J
C = Universal Combo
BM11 = 100 A, 10 kAIC, Solid cap (rated 15 kV)
VA31 = 300 A, Solid disconnect blade (rated for 7.8/15 kV and 15 kV)
W J
C = Universal Combo HA22 = 200 A, 16 kAIC, Link extender (rated 15/27 kV only)
VA32 = 300 A, Solid disconnect blade (rated for 15/27 kV and 27 kV)
0000 = Cutout Support only (no tube)
DIGIT 2 DIGIT 4
Insulator BIL Terminal Connectors
DIGIT 6
4 = 150 kV BIL N = No terminal
Special Options
600 mm creep
(silicone only) C = Clamshell
N = None
5 = 150 kV BIL E = Eyebolt
W J
C = Universal Combo
VA32 = 300 A, Solid disconnect blade (rated for 15/27 kV & 27 kV)
DIGIT 4
Cutout Cap
DIGIT 11
S = 100A Solid cap
DIGIT 2 Cutout Insulator
Voltage Level E = 100A Expendable cap DIGIT 6 DIGIT 9 Material
Arrester Type Cutout Terminals (Blank) = Porcelain
1 = 15 kV L = 100A Link extender
(only for 27 kV or C = Polymer normal duty 1 = Clamshell J = Silicone
2 = 27 kV 20/34.5 kV units)
H = Polymer heavy duty 2 = Eyebolt Z = Polymer concrete
3 = 38 kV T = 200A Solid cap (only available for
(use 150 kV BIL R = Riser pole 110 kV BIL cutouts)
insulator) F = 200A Expendable cap
15 = 15 kV
18 = 18 kV
21 = 21 kV
24 = 24 kV
27 = 27 kV
Replacement fuseholders
Interrupting
Style number Voltage rating (kV) BIL (kV) Current rating (A) rating (kA) Cap Type
www.abb.com/mediumvoltage
Note:
We reserve the right to make technical changes or modify the contents of this
document without prior notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any responsibility whatsoever for
potential errors or possible lack of information in this document. We reserve
all rights in this document and in the subject matter and illustrations contained
therein. Any reproductionin whole or in partsis forbidden without ABBs prior
written consent.