Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. On the FS7 the unit must be in Cine El mode 2. The codec must be set to one of the RAW
and the Color space set to S-Gamut3/Slog3. options. This setting is found under System
This setting is found under System -> Base -> Codec.
Settings.
Note:
The FS7 must be in Cine El mode to output
RAW, however when the camera is in this
mode there are some limitations.
1. Ensure the Shogun is connected to the FS700 with RAW output over SDI
2. On the Shogun, the Input page can be accessed by pressing the top left corner of the Shogun screen
(will show either HDMI or SDI)
3. Within the Input page, select SDI as the source
4. Select Raw Gamma and set it to either SLog2 or SLog3
5. Exit input page
6. Hitting the Rec button will now result in a SLog2 or SLog3 clip being recorded