Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
e s ds Dc k k1
d
min. min. max. min. max. Max max. min.
M5 7.44 6.64 7 4.82 5 11.4 5.6 2.30
M6 8.58 7.64 8 5.82 6 13.6 6.8 2.90
M8 10.80 9.64 10 7.78 8 17.0 8.5 3.80
M10 14.08 12.57 13 9.78 10 20.8 9.7 4.30
M12 16.32 14.57 15 11.73 12 24.7 11.9 5.40
M14 19.68 17.57 18 13.73 14 28.6 12.9 5.60
M16 22.94 20.48 21 15.73 16 32.8 15.1 6.70
nom. min. max. min. Max. min. Max. min. Max. min. Max. min. Max. min. Max. min. Max.
10 9.71 10.29
12 11.65 12.35
16 15.65 16.35 ft
20 19.58 20.42 ft
25 24.58 25.42 5 9 ft
30 29.58 30.42 10 14 7 12 ft
ft
35 34.5 3505 15 19 12 17 6.8 13
40 39.5 40.5 20 24 17 22 11.8 18 6.5 14
45 44.5 45.5 25 29 22 27 16.8 23 11.5 19 6.2 15
50 49.5 50.5 30 34 27 32 21.8 28 16.5 24 11.2 20 6 16
(55) 54.4 55.6 32 37 26.8 33 21.5 29 16.2 25 11 21 7 17
60 59.4 60.6 37 42 31.8 38 26.5 34 21.2 30 16 26 12 22
(65) 64.4 65.6 36.8 43 31.5 39 26.2 35 21 31 17 27
70 69.4 70.6 41.8 48 36.5 44 31.2 40 26 36 22 32
80 79.4 80.6 51.8 58 46.5 54 41.2 50 36 46 32 42
90 89.3 90.7 56.5 64 51.2 60 46 56 42 52
100 99.3 100.7 66.5 74 61.2 70 56 66 52 62
110 109.3 110.7 71.2 80 66 76 62 72
120 119.3 120.7 81.2 90 76 86 72 82
130 129.2 130.8 80 90 76 86
140 139.2 140.8 90 100 86 96
150 149.2 150.8 96 106
ls= body length; lg= grip gaging length; ft = fully threaded; diameter-length combinations are
recommended, lengths in parentheses are not recommended
Page 2 of 2 Fastenal Product Standard REV-00
Date: March 27, 2012 M.536.FLB.10.9.P
Specification Requirements:
Dimensions: IFI 536 (unspecified dimensions shall conform to the general
specifications for flange bolts per IFI 536)
Threads: 6g
Material &
Mechanical Properties: ISO 898-1, Class 10.9
Marking: Manufacturer ID and 10.9.
Coating: Light protective oil.
Material Test Reports: The MTR must have documented lot traceability, including full
chemical and mechanical figures, to the specification(s) above.