Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Operation Guide
Read this manual carefully before you use this product and keep it handy for future reference.
TABLE OF CONTENTS
How to Read This Manual ..........................................................................................................3
Symbols ...............................................................................................................................3
Terminology ..........................................................................................................................3
Important .................................................................................................................................4
1.1.1 Managing Devices and Driver Information to Create Installer Packages ...............................5
2. Screen Configuration
3.7.1 Specifying the Criteria and Deleting the Matching Packages ............................................44
1
3.7.2 Deleting All Packages .................................................................................................44
6.1.1 General.....................................................................................................................51
7. Appendix
INDEX ..................................................................................................................................79
2
How to Read This Manual
Symbols
Indicates a situation that may result in property damage or malfunction if instructions are not followed.
Be sure to read the instructions.
[]
Indicates the names of keys that appear on the computer screen.
Terminology
Installer package
Administrator
The person who manages device settings. There are various kinds of administrators depending on
the device that is used. For example, a device administrator can configure device settings and a
user administrator can manage user information. Both referred to as "administrators" in this
manual. Specify an administrator depending on the device you are using or the device's
configuration.
Device
A printer or a multifunctional printer (MFP) on the network. The term "device" in this document
refers to a printer or an MFP.
Printer information
General name of the printer name and the settings of the port used to send print jobs.
Print Configuration
The print configuration that contains the customized information of a printer driver. You can also set
particular settings to be shown or hidden, and select whether or not to display a dialog box in
certain situations.
User
3
Important
To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any
damages whatsoever arising out of failures of this product, losses of documents or data, or the use or
non-use of this product and operation manuals provided with it.
Make sure that you always copy or have backups of important documents or data. Documents or data
might be erased due to your operational errors or malfunctions of the machine. Also, you are
responsible for taking protective measures against computer viruses, worms, and other harmful
software.
In no event will the manufacturer be responsible for any documents created by you using this product or
any results from the data executed by you.
Some illustrations or explanations in this guide may differ from your product due to improvement or
change in the product.
4
1. Overview of Printer Driver Packager
NX
Printer Driver Packager NX creates packages for installing the customized printer driver. By distributing
the package containing the customized printer driver, you can integrate the printer driver settings and
restrictions for different users.
You can register the device and driver information in Printer Driver Packager NX and easily create
installer packages with unified settings.
In the installer package, you can include information such as the customized printer driver settings,
printer names, and print port settings. You can also combine more than one package into a single
package to enable installing of multiple printer drivers at one time and specify the executing user of the
installer to enable users to install the driver without logging off and on again as a different user.
You can use Printer Driver Packager NX to customize the following printer driver settings:
You can change the setting values of each printer function from the factory defaults, enabling users
to run the devices with the customized setting values.
You can specify and lock setting values as the default values and prevent other users from changing
them on the printer driver.
You can lock functions and setting values to suit your environment needs and device uses.
In the printer driver, the only setting values displayed are the default values.
The printer functions you can lock or unlock vary depending on the type of the device you are
using.
5
1. Overview of Printer Driver Packager NX
You can specify the setting values of the printer function to hide or display.
The setting values that are set to "Do not Display" are not displayed in the printer driver. Only the
setting values that are set to "Display" are shown.
By hiding setting values to suit your environment needs and device uses, you can restrict the use of
settings in the printer driver that can be selected by users.
The setting values you can hide or display vary depending on the type of the device you are using.
Note that some printer drivers may not support the pop-up display function.
For details on the types of printer driver that support customization, see page 9 "1.3 Drivers
Supported by Printer Driver Packager NX".
6
Operating Environment
350 MB or more free space (required for installing Printer Driver Packager NX)
Hard Disk Space
1 GB or more free space (required for creating a package)*1
7
1. Overview of Printer Driver Packager NX
8
Drivers Supported by Printer Driver Packager NX
Print configuration
Applicable Create Import One click
Driver Name Version Newly
Drivers Package external file preset
create
(.RCF) (.json)
PostScript
Ver1.1.0 or later O O - -
Driver
PostScript
Ver1.0.0.0 or
Driver (New O O O *2
later
type driver *1)
Ver1.0.0.0 or
PCL 5 Driver O - - -
later
Ver1.0.0.0 or
PCL 6 Driver O O O -
later
Model-Specific
PCL 6 Driver
Printer Drivers Ver1.0.0.0 or
(New type O O O *2
later
driver *1)
LAN FAX
Ver1.50 or later O - - -
Driver
LAN FAX
Ver2.0.0.0 or
Driver (New O - O -
later
type driver *1)
Ver1.0.0.0 or
RPCS-R O O O -
later
9
1. Overview of Printer Driver Packager NX
Print configuration
Applicable Create Import One click
Driver Name Version Newly
Drivers Package external file preset
create
(.RCF) (.json)
Ver3.20.00
PostScript UD Ver3.3.0.0 or O O - -
later
PostScript UD
Ver4.0.0.0 -
(New type O O O -
V4.5.0.0
driver *1)
PostScript UD
Ver4.6.0.0 or
(New type O O O O*2
Universal later
driver *1)
Printer Drivers
Ver3.2.0.0 or
PCL6 UD O O O -
later
PCL6 UD
Ver4.0.0.0 -
(New type O O O -
V4.5.0.0
driver *1)
PCL6 UD
Ver4.6.0.0 or
(New type O O O O*2
later
driver *1)
PCL 6 Driver
(SP C250/ ver1.00 or later O - - -
DDST (GDI) 252)
Driver LAN FAX
Driver (SP ver1.01 or later O - - -
C250/252)
The printer drivers that have the following setting screens supports the customize function:
10
Drivers Supported by Printer Driver Packager NX
*2 RICOH Pro C7100/C7110X Series Specific driver, Specific driver (2015 or later release date),
and PCL6/PS Driver for Universal Print Ver.4.6.0.0 or later. (Please see the RICOH web site for
supported drivers.)
Supported Port Monitor Application
11
1. Overview of Printer Driver Packager NX
12
2. Screen Configuration
The following section explains the screens and setting items of Printer Driver Packager NX.
In Printer Driver Packager NX, use the view list on the left side of the window to switch screen between
"Device View," "Driver Manager," and "Print Configuration Manager."
3
2
CQE200
1. Tool Bar
For details about the tool bar buttons, see page 13 "2.1.1 Tool Bar Items of Device View".
2. Group Tree
Displays the group hierarchy.
3. Device Information
Displays the information about the device registered to the group that is selected on the group tree.
By clicking the buttons, you can register groups or devices and create installer packages.
13
2. Screen Configuration
Rename Group Renames the selected group. page 18 "3.2 Adding a Group"
These operations can also be performed from the [Tool Manager] menu.
14
Driver Manager
CQE201
1. Tool Bar
For details about the tool bar buttons, see page 15 "2.2.1 Tool Bar Items of Driver Manager".
2. Driver Information
Displays the driver information.
Click the buttons to register drivers and change how the items are displayed in the window.
15
2. Screen Configuration
CQE202
1. Tool Bar
For details about the tool bar buttons, see page 16 "2.3.1 Tool Bar Items of Print Configuration Manager".
2. List View
Displays the default print configuration that has already been created.
16
3. Creating Installer Packages
This section explains how to create an installer package.
Register the printer driver to embed in a package to Printer Driver Packager NX.
Create print configuration and customize the setting items of the printer driver.
To create an installer package, link the device added in step 3 to the printer driver registered in
step 2. You can also embed the print configuration created in step 4.
For details, see page 33 "3.6.1 Creating a Package for Adding a Printer".
17
3. Creating Installer Packages
To create a lower group, select a group that is already created, and then click [Add Group].
For how to add devices, see page 20 "3.4 Adding the Device Information".
Double-click the group for which you want to change the name.
To delete a group
Select the group you want to delete, and then click [Delete Group(s)].
When a group is deleted, the devices and lower groups that are registered under the group are
also deleted.
When a device is deleted, all of the installer packages linked to the device are also deleted.
Specify the group name using between 1 to 17 characters. \ / : * ? " < > | . are prohibited
characters.
18
Adding a Printer Driver
2. Click [Browse...].
3. Specify the folder in which the INF file of the driver you want to add is located, and click
"Select Folder".
* Please note that INF files are not displayed in the folder selection dialog box. You can specify the
parent folder of subfolders that contain multiple drivers.
5. Specify the driver name of the driver to be added, and then click [Start].
If information for more than one driver is contained in a single INF file, the search results will
appear on multiple lines. When a parent folder that contains multiple drivers is specified, all of the
drivers that can be added are displayed in a list.
7. Specify PDL and the bit number according to the added driver.
When the driver type has been recognized automatically, those items are automatically selected
accordingly and cannot be specified by the user. In this case, proceed to the next step.
Selectable, select the correct bit number for the driver. Otherwise, the driver cannot be installed
correctly.
8. Click [Next].
9. Click [Finish].
You can change the driver registration name and its description.
Select the driver for which you want to edit the information, and then click [Edit Driver].
Select the driver you want to delete. Click [Delete Driver], and then click [Delete].
Do not change the subfolder names after downloading the driver from the Internet and extracting
it. If the driver subfolder names are changed, installation packages may not be created correctly.
19
3. Creating Installer Packages
1. In Device View, select the group for which you want to add a new device, and then click [Add
Device].
Configurable Settings
Either [IPv4
Enter IPv4 address of the device with the valid IPv4 Address] or [Host
IPv4 Address
syntax. Name] must be
specified.
Enter the host name of the device. Specify in the Either [IPv4
FQDN format within 255 characters. Address] or [Host
Host Name
Single byte alphanumeric characters, ".", "-" and "_" Name] must be
can be used. specified.
20
Adding the Device Information
Serial Number, MAC Address, Location, and Comment are for device identification purposes only.
The machine functions normally even if those items do not match the actual device information.
3. Click [Edit Printer Information], and modify the printer information as necessary.
For the printer port information that can be specified, see page 21 "3.4.1.1 Printer Information".
4. Click [OK].
When a device is added, the printer information configured in the preference setting is added.
When you select a group and click [Delete Group(s)], all devices registered under the group are
deleted.
When you delete a device, the package that is linked to the device is also deleted.
The [Candidate Printer Name] and [Network Address] printer information are not automatically
changed even if the [Device Registration Name] or [IPv4 Address] in [Edit Device] are changed.
Run [Re-create Printer Information] for devices that have had device information changed.
Configure the printer name and port settings for the driver to be installed.
Setting
Item Explanation Default value
Required
21
3. Creating Installer Packages
Setting
Item Explanation Default value
Required
*1 More than 31 characters can be entered when using a variable, but the characters after the 31st are ignored
when converting printer name.
*2 This is required only when the [SNMP Status Enabled] check box is selected.
22
Adding the Device Information
Setting
Item Explanation Default value
Required
*1 More than 31 characters can be entered when using a variable, but the characters after the 31st are ignored
when converting Printer Name.
23
3. Creating Installer Packages
Setting
Item Explanation Default value
Required
*1 More than 31 characters can be entered when using a variable, but the characters after the 31st are ignored
when converting Printer Name.
24
Adding the Device Information
Setting
Item Explanation Default value
Required
*1 More than 31 characters can be entered when using a variable, but the characters after the 31st are ignored
when converting printer name.
Setting
Item Explanation Default value
Required
http://$
Specify the IPP port. Up to 1,023 characters
IPP URL Required (ipaddress):
can be entered.
631/printer
25
3. Creating Installer Packages
Setting
Item Explanation Default value
Required
Proxy Server Address Select the check box to use the proxy
*1
Optional -
without a specific user account.
Select a group and click [Delete Group] to delete all of the devices in the group.
You can import the device information that was exported from Printer Driver Packager NX or Device
Manager NX.
In the CSV file that was exported from Printer Driver Packager NX, the device identification information
is stored as "DEVICEID". If the imported device information contains the same "DEVICEID" as already
26
Adding the Device Information
registered, the device information will be overwritten. The device of the same name but with different
"DEVICEID" is added separately as a new device.
2. Click [Browse...].
If the first row in the CSV file does not contain the field names, clear the [The first line contains item
names] check box.
If you do not want to overwrite device information with the same device ID, deselect the [Overwrite
the device information with the same ID with the registered device information] check box.
4. Click [Import].
If the CSV file you want to import was not created by Printer Driver Packager NX, proceed to Step
5.
If the CSV file you want to import was created by Printer Driver Packager NX, proceed to Step 7.
5. Select the setting item in the middle left part of [Import CSV File], and click [Select].
The field name or column number in the imported CSV file is assigned to items such as
DISPLAYNAME, MODELNAME in the middle right part.
Click the item name such as DISPLAYNAME and MODELNAME to which you want to assign the
imported item before clicking [Select].
6. When you are finished allocating all items, click [Preview].
7. Click [Next].
8. Click [Finish].
If there is no printer information in a device imported from a CSV file, the printer information is
automatically generated.
When a device for which printer information is already created is overwritten by importing from a
CSV file, the printer information is not updated. Run [Re-create Printer Information] for devices
whose device information was overwritten when the CSV file was imported.
27
3. Creating Installer Packages
You can specify the customized value for the default settings of the printer function, lock values of setting
items, and select to show or hide certain setting items. You can also set a pop-up dialog for entering/
confirming the authentication and user information when printing.
With One Click Presets, you can customize the driver's One Click Preset icon.
2. Select [Display All Available Models] or [Display Only Models on the Device List in Device
View].
Displays only the models of the devices that are registered in the device view.
3. Select the model and the driver, and then click [OK].
4. Select [Newly Create] or [Import External File] under [Add Print Configuration], and click
[OK]. For details on drivers that support addition of print configurations, see page 9 "1.3
Drivers Supported by Printer Driver Packager NX".
Click the "Default Setting" column of the setting item, and select the value you want to set as
its default from the drop down list.
You can change the default value in the screen that appears by clicking the [Details...] button.
Click the "Lock/Unlock" column of the setting item, and select [Lock] from the drop down list.
You can lock the default value in the screen that appears by clicking the [Details...] button.
1. Select the setting item name, and click the [Details...] button.
2. Click the "Display/Do not Display" column of the setting item, and select [Do not
Display] from the drop down list.
28
Adding Print Configuration
3. Click [OK].
1. Click [Option Configuration] tab, and select the check box of the dialog you want to
show.
2. If the dialog that you want to display has the [Option Configuration] setting, select the
default value of the text string you want to display in the dialog box from the pop-up
menu.
For the types of the printer driver, see page 9 "1.3 Drivers Supported by Printer Driver Packager
NX".
The functions on the [Option Configuration] tab are not available in the PS and RPCS raster
drivers.
The setting items of the printer function, the name displayed on the screen, and the setting values
you can select vary depending on the type of device or printer driver you are using. For details
about each printer function, see the manual provided with the device you are using or the printer
driver Help.
If the driver used as the basis for the print configuration is deleted from Printer Driver Packager NX,
the print configuration is grayed out and cannot be edited.
For some printer drivers, the notations of selections and functions that are displayed in the print
configuration editing screen and the ones that are displayed in the UI after installing the printer
driver can differ.
For the PostScript printer driver on a device equipped with the optional duplex printing function,
the default value for duplex units or duplex printing from the printer driver must be manually set
after the driver is installed.
If a EMF spool is enabled from the printer driver's print settings with a driver that has been enabled
for the function to display the pop up dialog while printing, the dialog will not be displayed before
printing. If displaying a dialog before printing, do not enable the EMF Spool in the printer settings
of the printer driver.
To apply the print settings file in the Universal Driver, the following must be done after installing the
driver.
2. In "Select a Printer," select the same model as the one used to create a print configuration.
29
3. Creating Installer Packages
If the PS Driver for Universal Print is installed the default value for duplex units or duplex printing
must also be manually changed from the printer driver after the driver is installed, for the printer
model which supports duplex units or duplex printing.
(PS Universal Driver V3.13 or earlier. Be sure to run with administrative privileges.)
With some PS drivers, dual sided print and print resolution settings are not available. For more
information, please refer to the Printer Driver Packager NX download page.
Data file containing PS driver or PCL6 driver that was customized in Printer Driver Editor.
B2) Enter print configuration registration name, and then click [OK].
When an external file is imported to create a print configuration, the print configuration items
cannot be edited using Printer Driver Packager NX.
When importing an rst file, create an rst file on the same PC that Printer Driver Packager NX is
installed on, and import into this file. An external file cannot be imported if the path described in
the lst file created at the same time as the rst file is different.
Press the [Import] button and import the json file prepared in advance.
The order of the One Click Presets imported can be changed by the [Up] and [Down] buttons.
Select the settings to delete, and then press the [Delete] button.
Export
The json file output by [Export] can be reused in other One Click Presets.
30
Adding Print Configuration
This is a preset button function that allows printer driver settings to be switched with one operation.
If customizing and installing One Click Presets, the factory default One Click Presets are all deleted
except for the one [Basic Setting]. Register icons for other than for [Basic Setting] on the [Edit One
Click Preset List] screen.
How to create json files
One Click Presets you registered yourself can be saved from [Manage Preset List] in the [One
Click Presets] tab of [Printing preferences] for the printer.
- Administrators
Factory default One Click Presets can also be saved from [Manage Preset List] in [Printer
Properties] - [Advanced Options] tag.
The following setting items can be displayed in the pop-up dialog box. The setting values that are
displayed on the screen vary depending on the type of the device or printer driver you are using. For
details about each item, see the manual provided with the device you are using or the printer driver
Help.
Displays a dialog box according to the print method specified when printing. For example, a
dialog box displaying the User ID and password appears when sample print or locked print has
been selected.
From the pull-down menu, select the initial value of the authentication information that is displayed
in the dialog. The following initial values can be selected:
[Default]
[Blank]
31
3. Creating Installer Packages
[Authentication] Dialog
From the pull-down menu, select the initial value of the authentication information that is displayed
in the dialog. The following initial values can be selected:
[Default]
Displays the authentication dialog box when the login user name and password of the device do
not match the login user name and password of the Windows account.
From the pull-down menu, select the initial value of the authentication information that is displayed
in the dialog. The following initial values can be selected:
[Default]
Displays the authentication information that is preconfigured in the printer driver.
The [User Code] Dialog and the [Single Sign-On Authentication] Dialog cannot be specified
simultaneously.
32
Creating Installer Packages (Output)
You can create an installer package that has the customized initial values (default settings) for the
printer function. You can also set certain setting items to be displayed or hidden or customize the
settings of the optional functions in the installer package.
You can create packages for deleting a printer driver from the computer on which the package is
executed.
Batch Package
You can create an installer to install multiple packages for installing printers.
1. Select a device for which to create a package in Device View, and then click [Create Installer
Packages].
For details on the setting items, see page 34 "3.6.1.1 Setting items in the Create Installer
Packages screen".
3. Click [OK].
A folder representing the hierarchy of the group to which the device belongs is created inside the
specified folder.
5. The list of the packages that will be created appears. Check the list and click [Start].
6. Confirm that creating the package is complete, and then click [Close].
If [Output Package to External Folder] is on, the following two files are output when the package is
successfully created.
- Package log file in which setting information is saved when the package is created
(extension = txt)
At least 800MB of free HDD space is required in the Printer Driver Packager NX installation folder
to create a package.
33
3. Creating Installer Packages
[Basic] tab
Driver update
*1 Off
Install Driver Only Installing a substitute driver
34
Creating Installer Packages (Output)
35
3. Creating Installer Packages
* To perform bidirectional
communication, administrator privileges
are needed for the Windows computer
the package will be installed on.
36
Creating Installer Packages (Output)
37
3. Creating Installer Packages
Use One Click Preset When [Port Selection] is as follows, the Off
print configurations are not reflected on
the printer even if a print configuration is
specified.
*1 When updating the driver, update installation may fail if the version of the old LAN FAX Driver is 1.77.0.0 or
earlier. Use version 1.79.0.0 or later for update. Alternatively, delete the old driver and then install the new
one.
*2 When installing the Point & Print printer on a client PC, the print settings configured with Printer Driver Packager
NX are not reflected. However, when a driver is installed to (Point & Print) shared printer server, the print
settings are reflected just as in a normal driver installation. When the client PC is then connected to a Point &
Print printer, the print settings are reflected as normal.
38
Creating Installer Packages (Output)
[Advanced] tab
39
3. Creating Installer Packages
40
Creating Installer Packages (Output)
Package Installation for the [SmartDeviceMonitor (TCP/IP)] port and [SmartDeviceMonitor (IPP)] port
SmartDeviceMonitor for Client needs to be installed in order to install a package for the
[SmartDeviceMonitor (TCP/IP)] port or [SmartDeviceMonitor (IPP)] port.
The SmartDeviceMonitor for Client installer can be incorporated into the installation package for
environments in which SmartDeviceMonitor for Client is not installed.
Follow the procedures below to incorporate the SmartDeviceMonitor for Client installer into the
installation package.
1. Set the [Installer Path for SmartDeviceMonitor for Client] in the [Installer Package] preferences.
2. Set [Install SmartDeviceMonitor for Client] to On in the [Advanced] tab of the package
creation window.
The [Install SmartDeviceMonitor for Client] setting is disabled by default. The following conditions
are required to enable it.
The [Installer Path for SmartDeviceMonitor for Client] is set in the preferences
41
3. Creating Installer Packages
Packages for multiple devices can be created simultaneously with one operation.
1. Select multiple devices to create packages for. (Or select a group that includes the devices.)
(To select devices, click on devices while holding the [Ctrl] or [Shift] key.)
3. A list of all printers, print configurations, and One Click Presets included with the selected
device is displayed on the Create Package screen. Create packages by selecting the ones you
want to create packages for.
The total number of packages created when multiple devices are selected is roughly the following
number of combinations.
Total packages = Number of devices x Number of drivers compatible with those devices x Number
of port types selected
Print configurations and One Click Presets are only reflected in packages of the combinations with
drivers when created.
If different drivers are registered for each device, a different driver package is created for each
device individually.
The following section explains how to create a package that deletes the printer, printer ports, and
printer drivers in a batch from the computer on which the package is executed.
2. Select the check box for the driver name of the printer you want to uninstall.
3. Click [OK].
4. Specify the save location of the created package, and then click [OK].
5. Click [Close].
If the [Pop up a dialog box for cleaner completion.] check box is selected, a completion message
will appears when deleting the printer is complete.
The driver names registered in Printer Driver Packager NX are displayed in the [Driver Name] list.
If you execute a package for deleting a printer on a computer where more than one printer is
installed, all the printers that match the driver specified in the package are deleted.
"32bit" and "64bit" folders are created in the specified folder, and a package for deleting a
printer for each of the 32-bit and 64-bit versions of Windows are output into the respective folders.
42
Creating Installer Packages (Output)
The following section explains how to create an installer to install more than one package as a batch.
The package for adding a printer must be created before creating a batch package. For how to create
a package for adding printers, see page 33 "3.6.1 Creating a Package for Adding a Printer".
1. In Device View, select multiple devices for which packages are already created that will be
included in batch package installation (or with group including devices selected), and then
click [Batch Package Creation].
[Silent Mode]
Select whether or not to display a completion message when the installation process is
completed.
To specify the executing user of the driver installer, select this item and specify the domain
name, user name, and password.
4. Click [OK].
5. Specify the output location of the installer to be created, enter its name, and then click
[Save].
6. Confirm that creating the installer file is complete, and then click [Close].
In the created Batch Installer Package, the [Silent Mode], [Pop Up the Installation Completion
Dialog Box], and [Use Specified User Account] settings configured in the procedure above can be
enabled. If these settings are enabled, the individual settings of the embedded installer packages
are ignored.
43
3. Creating Installer Packages
You can delete packages that match the specified criteria from the devices in the selected group or from
the packages that are linked to the selected devices.
1. Select a device in Device View, and then click [Delete installer packages].
Port Selection
Specify the protocol of the printer port to narrow down the selection.
Package Versioning
Specify the version of the package to narrow down the selection. If you select [Or Greater],
all packages with the specified version or higher are selected. If you select [Or Less], you can
select all packages with the specified version or lower.
Driver Selection
Select the packages to be deleted in the list of packages that match the specified criteria.
3. Click [Delete].
You can delete all the packages linked to the selected device.
1. Select a device in Device View, and then click [Delete All Installer Packages].
2. Confirm the package to be deleted, and then click [Delete].
44
4. Executing Installer Packages
"Printer"
A printer icon is created in the [Devices and Printers] list with the printer name set in the installer
package. If a printer icon with the same name already exists on the installation PC, an icon is
created in accordance with the conditions set in the installer package.
* Please note if the icon name is changed manually, the package cannot be deleted correctly when
it is uninstalled from the "Programs and Features" list.
The [Printer Name [Driver Name]] is registered in "Programs and Features" of the Control Panel.
* When the package is uninstalled from "Programs and Features", the corresponding printer, port
and driver are deleted. However, the port and driver are not deleted if they are being used by a
different printer.
"Printer"
Is not added.
The existing printer icon is saved, but the setting contents of the printer icon may be cleared and
returned to the initial values depending on the type of printer driver. See the README or driver
information for the latest information.
The default settings specified in the print configuration are lost if the printer name is changed after
installation. Reinstall the package if you change the printer name.
If the same driver is already installed in the environment in which the package is being installed,
the installation process is skipped if the version of the driver included in the package is older than
that of the installed driver.
If a printer with the same name as the printer name in the installation package already exists in the
environment in which the package is being installed, either the existing printer name is overwritten
or the name of the printer to be installed is renamed and added. (See [Operations to Perform
When a Printer with the Same Name Exists] setting in "3. Creating Installer Packages" on page
34.)
45
4. Executing Installer Packages
If a print port with the same name as the print port in the installation package already exists in the
environment in which the package is being installed, the existing print port is used unchanged in
the installation.
An error/warning message is displayed in the following cases even if an installer package set to
silent mode is executed.
- When the UAC settings are enabled and the installer package is executed in an account other
than a built-in administrator that belongs to the Administrators group
In cases where a package set with [Add a unique suffix to printer name] is installed when a printer
with the same name already exists in the environment and the package is then uninstalled from
"Programs and Features" in the Control Panel, the operations are as follows.
Only one (package) program is displayed in "Programs and Features". When uninstalled,
only the most recently installed printer is deleted, and the (package) program disappears from
"Programs and Features".
- When separate packages (with the same printer name) are installed:
The number of (package) programs installed are displayed in "Programs and Features".
When uninstalled, the printer that corresponds to the selected (package) program is deleted.
In the case of Point & Print shared printers, the printer icon is only created for the executing user.
When installing a shared printer package, ensure that the URL can be connected to when installing
the package. For example, a package installation error occurs if the login name and password
need to be entered to connect.
The printer icon will always be overwritten in the case of shared printers and USB printers.
3. When the USB cable is connected, the Plug & Play function in Windows OS automatically
recognizes the printer, and a printer icon of the installed driver is created.
When updating a printer driver already installed for a USB port, installing by the [Install Driver
Only] package is recommended. After installing, plug in the USB cable again.
If updating the printer driver by USB printer installer package, delete the USB icon once before
plugging in the USB cable again.
46
Executing a Package for Deleting a Printer
Printer icon
Port
Uninstall for the installer package registered in [Programs and Features] in the control panel.
However, those currently being used, such as when printing is in progress, will not be deleted.
Nothing is displayed on the screen when a package for deleting a printer is executed correctly.
- Printer icons and printer drivers may remain without being deleted.
- Even if the printer driver seems to be deleted by executing the package for deleting a printer,
the printer will remain in the Windows DriverStore, so the printer will be operated when
connecting a USB cable again.
Printer drivers installed using Point & Print are not deleted by the package for deleting drivers.
When a Point & Print shared printer package is uninstalled from "Programs and Features" in the
Control Panel, the [Failed to disconnect network printer.] message may be displayed and
uninstallation may fail. In this case, either use a package for deleting a printer or delete the printer
manually.
If there is a print job remaining in Windows Spooler, overwriting of the printer icon or execution of
the package for deleting a driver fails.
The execution order of installer packages in the batch installer package is not set and cannot be
specified.
47
4. Executing Installer Packages
48
5. "Device Manager NX Pro", "Device
Manager NX Enterprise" Server Linkage
You can link to the installer package distribution function of "Device Manager NX Pro" or "Device
Manager NX Enterprise".
You can upload installation packages created using Printer Driver Packager NX to "Device Manager NX
Pro" Server or "Device Manager NX Enterprise" Server, and register associations to devices in the
Server. This creates a very easy to understand distribution method for installation packages because
users can select the device that they want to use in the Server and then download the corresponding
installation package.
1. Set the address information of the server in the preferences beforehand in order to link with
"Device Manager NX Pro" or "Device Manager NX Enterprise". (See page 51 "6. Editing the
Printer Driver Packager NX Preferences")
2. Create an installer package as normal. (See page 17 "3. Creating Installer Packages")
3. Select the device or group that includes the created installer package, and specify [Upload] from
the menu or button.
4. Select the installer package to upload from the upload window to upload it. (A server login
window is displayed the first time you upload an installer package. It is not displayed on the
second and subsequent times.)
The roles of the "Device Manager NX Pro" or "Device Manager NX Enterprise" that can upload an
installer package are as follows.
- Full Admin
- Device Admin
* For details on roles (privileges) and the handling of uploaded installer packages, see the "Device
Manager NX Pro" or "Device Manager NX Enterprise" manual.
49
5. "Device Manager NX Pro", "Device Manager NX Enterprise" Server Linkage
When linking to "Device Manager NX", you do not need to create packages for each device if the
driver, model and settings are the same. It is recommended that you create and upload a package
using the steps below.
When the user downloads an installer package from "Device Manager NX", the port information
of the installer package is automatically overwritten with the IP address or host name of the
appropriate device.
The [Use Specified User Account] option (see page 40) can be updated using the "Account for PDP
NX Driver Package Installation" setting in "Device Manager NX Pro" Server or "Device Manager
NX Enterprise" Server when an installer package is created. However, this setting will be applied
to all uploaded packages because this installation account setting is a shared setting throughout
the Server system as opposed to a setting in individual packages. Use the "Printer Driver Packager
NX" settings to switch to package units. Also, please note that when an installer package is
created with the [Use Specified User Account] setting Off and the user account information is
rewritten on the Server, the package may not operate correctly due to the combination of settings.
For details, see the restrictions described in the explanation of "Use Specified User Account" on
page 40.
50
6. Editing the Printer Driver Packager
NX Preferences
On the [Preferences] screen, you can configure various settings of Printer Driver Packager NX, such as
the initial value of printer information and the location for storing created files.
[General]
[Device View]
[Installer Package]
To reset all settings in the preferences to their initial values, click [Reset All].
To reset the settings in the currently displayed screen to their initial values, click [Reset Only
Displayed Page]. Settings for each port in [Device View] are reset in a batch.
6.1.1 General
Configure the following items to set the logging and display language settings.
Logging Level
All user operations performed in Printer Driver Packager NX are recorded in the log. Select
[ERROR] to record log regarding errors. If you want to record a more detailed log, select [DEBUG].
Language
Also, you can change the language displayed during driver installation or uninstallation by the
created installer package.
Server Settings
Configure the linked servers. (See page 49 "5. "Device Manager NX Pro", "Device Manager NX
Enterprise" Server Linkage")
51
6. Editing the Printer Driver Packager NX Preferences
Set the information of the server to be linked in [Server Address], [Port Number] and [SSL
Connection].
If [The Package for Device Manager NX]=ON, create dedicated packages for Device Manager
NX as follows.
When registering devices, network address and host name will no longer need to be entered.
Packages cannot be output as external files and cannot be installed on a local PC.
You can specify how to edit the device information on the [Device View] screen and the initial settings of
the printer information.
Some of the items accept variables. For the available variables, see page 52 "6.1.2.1 Variables that
can be used in Device View".
Enter
Select whether or not to display a pop-up dialog box to edit the device information when editing
the information on the Device View screen.
When the [Enable Edit Device Dialog Box] check box is cleared, you can directly enter the
information on the device list view.
Specify the initial values of the port that is used when creating new printer information.
The settings for [TCP/IP Port], [LPR Port], [SMB/Windows Server Queue Information],
[SmartDeviceMonitor for Client - TCP/IP] and [SmartDeviceMonitor for Client - IPP] can be
configured on the corresponding tabs.
For details about port settings, see page 21 "3.4.1.1 Printer Information".
The following variables can be specified in [Device View] under [Preferences]. A variable is replaced by
a different value for each device such as its IP address and model name, and the resulting value is
registered as the default value in the device information.
Variables are replaced by the values specified when registering the device information. For details
about adding device information, see page 20 "3.4 Adding the Device Information".
52
Setting Items under Preferences
Conversion details:
Variables
Variables are replaced by items set in [Add Device] or [Edit Device]
An error occurs and the specification fails when a variable other than the ones listed above is
specified.
You can specify the settings such as the output destination of the created installer package and the
location of the printer driver.
Some of the items accept variables. For the available variables, see page 55 "6.1.3.1 Usable
variables in Installer Package".
Setting
Item Explanation Default value
Required
$(displayname)_$
Specify the generation rule of package (portname)_$
Package Name file names. Up to 250 characters can Required (drivermodelname
be entered. )_$(bit)Bit_$
(msiversion)
53
6. Editing the Printer Driver Packager NX Preferences
Setting
Item Explanation Default value
Required
\package\RICOH\PRINTER
\system\REGISTERED_DRIVERS
54
Setting Items under Preferences
You can use variables when specifying [Installer Package] under [Preferences].
The following variables will be replaced by the corresponding values such as the device registration
name of the device or driver name according to the different device or driver when creating a package:
Variables Explanation
This variable will be replaced by the name of the printer language (PDL)
$(pdlname)
used on the device.
$(msiversion) This variable will be replaced by the MSI Version of the package.
The following variables will be replaced by the path name where Printer Driver Packager NX is installed
when a package or saving drivers are created:
Variables Explanation
55
6. Editing the Printer Driver Packager NX Preferences
An error occurs and the specification fails when a variable other than the ones listed above is
specified.
56
7. Appendix
The following section explains how to create the individual configuration file to be embedded in an
installer package. It also explains the troubleshooting procedures.
Please note the following points when setting up Printer Driver Packager NX on a PC for the first time.
Install
Startup
Please run packager.exe which is directly under the folder that was specified during installation.
Uninstall
Please note that when deleting the folder, all created information (drivers, packages, etc.) will also
be deleted.
Please note the following points when creating installer packages using Printer Driver Packager NX.
Device view
When using a LAN Fax Driver, see Readme.txt included with the driver. Please specify the model
name or model type that corresponds to the model in the model name field of the device
information section.
Driver management
Concerning the page description language (PDL) and number of bits (32/64) for the driver, be
sure to check the Readme.txt and enter the correct information. Not having the correct number of
bits can especially cause problems with behavior.
57
7. Appendix
Symantec anti-virus software may detect some of the files in the RPCS raster driver as a virus during
installation. For this case, please update the anti-virus software and virus definitions before
installing the RPCS Raster driver.
Package Creation
If configuring the [Use Specified User Account] when creating the package, the below restrictions
will apply.
- The user code/user ID/user name separated configuration file (CSV) cannot be set.
If any of the above have been set, a warning or error message may be displayed during package
creation.
- Universal Driver
If an IP address is in the URL or UNC path, do not put a '0' at the beginning of each number.
Putting a '0' at the beginning of the number will result in not being able to print on Vista/2008 and
later operating systems. (filling with '0' is prohibited)
incorrect input example: \\192.168.000.001\Shared_Printer
correct input example: \\192.168.0.1\Shared_Printer
To install drivers on a computer using the installer package, pay attention to the following:
Depending on the contents of the installer package that is created or installation environments, drivers
may not work properly.
For the precautions for driver installation, see "Readme" in Printer Driver Packager NX. For details about
how to delete the installed driver, see "Readme" provided with the printer driver.
Package Installation
If installing the package that is set in [Add a unique suffix to printer name] for when the printer with
the same name exists, uninstalling the package from "Add or Remove Programs" ("Programs and
Features" Vista or later) will perform uninstallation as follows;
58
Supplementary Information
If you uninstall the program, the printer which is last installation was deleted. And then the
program name disappears from the "Add or Remove Programs".
- If you installed different package for the printers which are same printer name :
The number of program names is same as the number of the installed packages.
If you uninstall for one printer, the printer corresponding to the uninstall program will be
deleted.
For the setting value of the user code/user ID/user name in the individual settings CSV file, there is
a driver that is retained even if changing the printer name and driver that is retained even after
uninstalling.
For the drivers that are retained even when uninstalling, please note that the value that is set
previous to reinstalling is kept when a value is not set during re-installation.
<Values not carried over due to a printer name change = even if uninstalling, the value is retained>
- UniversalDriver (2013/7-)
If installing a USB printer, please do the package installation without connecting the USB cable.
After installation, connect the USB cable.
It will be automatically recognized by the Plug & Play feature in the OS, and the installed printer
driver will be created.
When creating and executing the deletion package of the USB printer:
- For Windows 8 or later as well as Windows Server 2012 or later, the printer icon may
remain.
- If connecting the USB cable after running the deletion package, the printer icon will be
created with the driver retained in the Windows driver store.
For a shared printer Point & Print, printer icon is created only to the user who executed the installer.
If installing the shared printer, please perform the package installation so that the URL or UNC
paths are possible to connect to.
For example, if login name and password are required to connect, the package installation will
result in an error.
The hotfix (KB2511290) needs to be applied in advance to upgrade the driver version with a
combination of OS and drivers described as follows:
<affected OS>
59
7. Appendix
<affected drivers>
The driver upgrade has been known to fail if using versions V3.20.00 and V3.10.00 of the PS
universal driver.
If not Installing with version V4.0.0.0 or later, perform an uninstall before reinstalling.
If the printer driver that was installed by another installer is present, it may fail to install driver
package of the same version.
In this case, a package for upgrading the driver version needs to be prepared or the driver needs
to be removed and reinstalled.
When doing an upgrade installation on an old PC FAX driver, an error may occur.
For the installation of an old PCL driver package, settings such as user ID/user code and print
settings may fail if a printer of the same name is present. In this case, remove and reinstall the
driver.
60
Creating the Individual Configuration File
The individual configuration file is a file in CSV format containing the settings values that may differ for
each device or user such as the user code and user name.
By creating the individual configuration file and embedding the file in the installer package, you can
identify and configure the required user settings of the driver when installing it on different computers.
The sample format file of the CSV file that can be imported is stored in the sample folder under the install
folder of Printer Driver Packager NX.
User Information
User Code
User ID
User Name
Printer Properties
Printer name
Comment
Location
Option Configuration
The individual configuration file must be a CSV file in the appropriate character code using the
language of Windows operating system or those specified in "Regional and Language Options":
The line that begins with a sharp symbol (#) is treated as a coment. Comments can be entered on
any lines in the file.
61
7. Appendix
The item names must be defined as the title line in the first line of the file.
The items "machine," "account" and "pcipaddress" must be written in this order on the first to third
columns of the file. Any order is acceptable for items of the fourth and subsequent columns. CSV
file with item names on the title line other than those specified will not be accepted.
Commas (,) cannot be used in the data. Use of double-quotation marks (") in the data is not
recommended. (Saving in Excel converts to two sets of double-quotation marks.)
Double-quotation marks ("), single-byte spaces, and tabs at the ends of the data are trimmed.
62
Creating the Individual Configuration File
63
7. Appendix
*1 Ignored even if specified for Point&Print (shared printer) and USB port.
64
Creating the Individual Configuration File
The installation process is performed using the item values of the lines that match the conditions
specified to machine, account and pcipaddress.
The processing priority for machine (computer name), account (login user name) and pcipaddress
(computer IP address) in the individual configuration file is as follows.
Level of
machine account pcipaddress
priority
Blank (pcipaddress
1 O (match) O (match) ignored if machine and
account match)
?default?
6 Blank Blank
(or @default@)
If multiple lines with the same priority exist, the last line is applied.
Use a text editor to edit a CSV file if application software such as Excel (spreadsheet
software) is not available.
<Sample 1> Example for always setting the same user code
Set the user code to "12345678" when the computer name is "machine1".
Set the user code to "9999" when the computer name is other than "machine1".
65
7. Appendix
<Sample 2> Example for setting the user code in accordance with the login user name
<Sample 3> Example for setting the user code in accordance with the IP address of the PC
By specifying custom strings (?string of your choice?) in machine and $PNAME$, multiple printer
icons can be added for one package.
<Sample 4> Example for registering multiple printer icons for one package
66
CSV file format of the Device list
In order to import or export a CSV file, click [Import Device Information] or [Export Device Information]
on the [Device View] tool bar.
The format of the CSV file used in Printer Driver Packager NX is as follows:
Enter the field names in the first to tenth columns on the first line, and the values corresponding to the
field names on the following lines.
Line number Field name on the first line Values on the second and later lines
*1 This item does not appear in the screen of Printer Driver Packager NX.
*2 Enter "/" if the device does not belong to any group. Enter "Group2/Group3" when the device belongs to
Group2 under Group3.
When the field names on the first line do not match the ones described above, or when the field
name information does not exist but the data on the first line is included in the file, you can assign
the items manually. For details about importing CSV files, see page 26 "3.4.2 Importing Device
Information".
67
7. Appendix
7.4 Troubleshooting
Problem Causes and Solutions
68
Error Code List
Error
Error Message Description Solution
Number
5000 Invalid Printer Name: The Printer name is blank Check the printer
Printer Name is empty. information.
5201 Invalid Parameter: Cannot When creating a package: Uncheck the [Set as Default
use the default printer Combination error Point & Printer] check box when
settings on the shared Print + DefaultPrinter creating a Point & Print
printer (Point & Print). package.
5202 Invalid Parameter: Cannot When creating a package: Uncheck the [Set as Default
use the default printer Combination error Printer] check box when
settings in the USB. USB + DefaultPrinter creating a USB package.
5203 Invalid Parameter: Cannot When creating a package: Uncheck the [Use Specified
use the user account Combination error Point & User Account] check box
settings on the shared Print + Switch User when creating a Point &
printer (Point & Print). Print package.
5204 Invalid Parameter: Cannot When creating a package: Uncheck the [Use Print
use the print configuration Combination error Point & Configuration] check box
on shared printer (Point & Print + Print configuration when creating a Point &
Print). Print package.
5205 Invalid Parameter: Cannot When creating a package: Uncheck the [Use Print
use the print configuration Combination error Configuration] check box
in the USB. USB + Print configuration when creating a USB
package.
6200 File Length Error: An invalid Length of the package file Change the package
file path was specified : path is invalid. output folder so that the
"Path information" > 250 length of the package file
The length of the package
path is within 250
file path must be less than
characters.
250 characters.
6400 Share name must be 39 or The maximum number of If setting "Use Printer Name
less 2-byte characters or 79 characters that can be as Shared Name," make
or laess 1-byte characters. specified for share name is the printer name shorter.
exceeded.
69
7. Appendix
Error
Error Message Description Solution
Number
6500 There is a defect on the There is an error in the Only use alphanumeric
CSV. specified CSV file. For characters for the CSV user
example, symbols may be ID. Or specify a driver that
set in the user ID even supports user ID startup.
though they are not
supported by the driver.
7100 Write Scenario Error: Then IP address or host name is Set IP address or host name
installer package building not specified. in the device information
process will be skipped and create printer
due to invalid network information again or edit
information. printer information, specify
network address, and then
create the package again.
7200 Candle Process Error: An internal error occurred (1) Reinstall Printer Driver
["Package ID": Unknown when creating the Packager NX into a new
error] package. folder.
(1) The environment may (2) Do not change the
be corrupt. subfolder names when
extracting the driver. Re-
(2) Characters that cannot
register the driver without
be used to create packages
changing the driver
may have been used in the
subfolder name.
driver subfolder.
9000 Invalid Parameter: The user When creating a package: Do not check both [Use
account settings and CSV Combination error Separate Setting File
file settings Switch User + Individual (CSV)] and [Use Specified
($USERCODE$, configuration CSV User Account] at the same
$USERID$, $USERNAME$) time.
cannot be used
simultaneously.
70
Error Code List
Error
Error Message Description Solution
Number
- The specified file is The print configuration (1) Either re-specify the
incorrect. imported from an external Driver Name or specify the
file is incorrect. correct RCF file.
(1) The RCF file driver does (2) Specify a file that has
not match. Or the specified an ".rcf" extension.
Driver Name and RCF file
(3) Create the RST file on
drivername are different.
the same PC used to create
(2) The RCF file extension is the package.
incorrect.
Error
Error Message Description Solution
Number
20 Cannot perform this The login user or specified Check the authorization of
operation because you do switch user does not have the login user or specified
not have Administrator's Administrator's switch user.
Authorization. Authorization.
21 Failed to add driver. Addition of the driver Check the manual, etc. of
failed. the driver to be installed to
ensure there are no
restrictions.
71
7. Appendix
Error
Error Message Description Solution
Number
22 Failed to add printer. Addition of the printer Check the manual, etc. of
failed. the driver to be installed to
ensure there are no
restrictions.
29 This share name is already The same name as the Change either the printer
in use. shared name already name or shared name, and
exists. execute again.
30 There is a job printing now. A job is currently printing. Complete the current print
job and execute again.
38 Cannot use the same name The same name cannot be Change either the printer
for printer and share name. used for the printer name name or shared name, and
and shared name. execute again.
42 The resource is in use. The resource is in use. Exit the printer that is
currently in use and
execute again.
47 The server name or The "IP Address", "Host Check the "IP Address",
address specified in the Name", "URL" or "UNC "Host Name", "URL" or
separate setting file (CSV) Path" specified in the "UNC Path" specified in
is incorrect. Check the individual configuration file the individual configuration
entry. is incorrect. file.
50 The separate setting item The "Printer Name" Enter the $PNAME$
name entered on the specified in the individual (printer name) specified in
printer name or print queue configuration file is too the individual configuration
is too long. long. file within 220 characters.
However, if [Use Printer
Name as Shared Printer
Name]=ON in the setting
when creating a package,
enter within 39 double-byte
or 79 single-byte
characters.
72
Error Code List
Error
Error Message Description Solution
Number
52 Incorrect printer name or The "Printer Name" Check the "Printer Name"
print queue. Check the specified in the individual specified in the individual
entry. configuration file is configuration file
incorrect. (prohibited characters: "\"
and ",").
57 Incorrect user code. The "User Code" specified Check the "User Code"
in the individual specified in the individual
configuration file is configuration file (single
incorrect. byte numbers only).
58 User codes must be 8 The "User Code" specified Enter the user code within
characters or less. in the individual 8 single byte numbers.
configuration file is too
long.
60 Cannot continue the This may be displayed The driver does not need to
installation because a new when a package for be updated.
driver has already been updating a driver is
installed. executed.
64 Incorrect user ID. The "User ID" specified in Check the "User ID"
the individual configuration specified in the individual
file is incorrect. configuration file (single
byte alphanumeric
characters only).
65 User ID must be 8 The "User ID" specified in Enter the user ID within 8
alphanumeric characters or the individual configuration single byte alphanumeric
less. file is too long. characters.
73 The login user currently The login user or specified Check the authorization of
logged in does not have switch user does not have the login user or specified
the Administrator's Administrator's switch user.
Authorization. Installation Authorization.
with authorization other
than the Administrator's
Authorization may fail, do
you want to continue?
73
7. Appendix
Error
Error Message Description Solution
Number
85 Share name must be 8 or The "User Name" specified Enter the user name within
less 2-byte characters or in the individual 8 or less 2-byte characters
16 or less 1-byte configuration file is too or 16 or less 1-byte
characters. long. characters.
94 Cannot set the User Code The User Code cannot be Remove the User Code
for the RPCS Basic driver set with the RPCS Basic settings and manually
(V3.1.0.0 and earlier). driver (version V3.1.0.0 or configure after installation.
earlier).
99 Cannot duplicate start the The package was executed Wait for the running
package. in an environment in which package to exit before
a package is running. executing the next
package.
100 Cannot update because the This may be displayed The driver does not need to
specified driver is not when a package for be updated.
installed. updating a driver is
executed.
1311 There are currently no Cannot login using the Check the specified switch
logon servers available to specified switch user. user.
service the logon request.
74
Error Code List
Error
Error Message Description Solution
Number
1326 Logon failure: unknown Cannot login using the Check the specified switch
user name or bad specified switch user user.
password. (Windows Server 2008 R2
or earlier).
1326 The user name or password Cannot login using the Check the specified switch
is incorrect. specified switch user user.
(Windows 8 or later).
Errors that occur when the package is installed are not displayed on the screen in silent mode. You
can notify whether or not the installation was successful in the log file below.
75
7. Appendix
7.6 Trademarks
Microsoft, Windows, Windows Server, Windows Vista and Internet Explorer are registered
trademarks of Microsoft Corporation in the United States and/or other countries.
Microsoft .NET Framework is registered trademarks of Microsoft Corporation in the United States and/
or other countries.
Intel, Pentium, and CoreTM are either registered trademarks or trademarks of Intel Corporation in the
U.S. and/or other countries.
Microsoft Windows 8
76
Trademarks
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.
Microsoft product screen shots reprinted with permission from Microsoft Corporation.
77
7. Appendix
78
INDEX
C
Deleting....................... 44
Device information ................ 20
Device view ................. 13, 52
Driver manager .................. 15
Drivers supported ................. 9
General ....................... 51
Group ........................ 18
I
Import ........................ 26
Important ....................... 4
Individual configuration file .......... 61
Installer package ................. 53
Preferences .................... 51
Print Configuration ................ 28
Print Configuration Manager ......... 16
Printer drivers ................... 19
Process flow .................... 17
S
Terminology ..................... 3
Trademarks .................... 76
Troubleshooting .................. 68
79
MEMO
80 EN GB EN US EN AU D644-9005D
EN GB EN US EN AU D644-9005D 2013-2016 Ricoh Co.,Ltd