Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
212 0 - 25
75 0-5
608-8
Not less than 90%, by mass of the ballotini, shall be of transparent glass,
spherical in shape and not more then ten (10) percent shall be ovate in
shape or have other flaws. The ballotini shall be made of soda glass.
e) Thickness
Unless otherwise approved by the Engineer, the material shall be laid to the
following thicknesses.
a) Sprayed lines other than yellow. Not less than 1.5 mm.
b) Sprayed yellow edge lines not less than 0.8 mm.
In no case shall the contractor proceed with the work until the equipment,
method of application and rate of application conforming the required
thickness (as established by a test section) have been approved by the
Engineer.
The preformed markings shall consist of white or yellow films with pigments
selected to conform to standard highway colours. Ceramic and glass beads
shall be incorporated to provide immediate and continuing retroreflection.
Ceramic skid particles shall be bonded to a top urethane layer to provide a
skid resistant surface.