Sei sulla pagina 1di 2

Job No Sheet No Rev

1
Part
Software licensed to
Job Title Ref

By Date24-Dec-16 Chd

Client File Structure15.std Date/Time 24-Dec-2016 15:05

Job Information
Engineer Checked Approved

Name:
Date: 24-Dec-16

Structure Type SPACE FRAME

Number of Nodes 4 Highest Node 4


Number of Elements 3 Highest Beam 3

Number of Basic Load Cases 2


Number of Combination Load Cases 0

Included in this printout are data for:


All The Whole Structure

Included in this printout are results for load cases:


Type L/C Name

Primary 1 LOAD CASE 1 live load


Primary 2 LOAD CASE dead load

Nodes
Node X Y Z
(m) (m) (m)
1 0.000 0.000 0.000
2 0.000 5.000 0.000
3 7.000 5.000 0.000
4 7.000 0.000 0.000

Beams
Beam Node A Node B Length Property
(m) (degrees)
1 1 2 5.000 1 0
2 2 3 7.000 1 0
3 3 4 5.000 1 0

Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 1.50x0.80 12E+3 6.4E+6 22.5E+6 17.1E+6 CONCRETE

Print Time/Date: 24/12/2016 15:12 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 1 of 2
Job No Sheet No Rev
2
Part
Software licensed to
Job Title Ref

By Date24-Dec-16 Chd

Client File Structure15.std Date/Time 24-Dec-2016 15:05

Materials
Mat Name E Density
(kN/mm2) (kg/m3) (/C)
1 STEEL 205.000 0.300 7.83E+3 12E -6
2 STAINLESSSTEEL 197.930 0.300 7.83E+3 18E -6
3 ALUMINUM 68.948 0.330 2.71E+3 23E -6
4 CONCRETE 21.718 0.170 2.4E+3 10E -6

Supports
Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)
1 Fixed Fixed Fixed - - -
4 Fixed Fixed Fixed - - -

Releases
There is no data of this type.

Basic Load Cases


Number Name

1 LOAD CASE 1 live load


2 LOAD CASE dead load

Combination Load Cases


There is no data of this type.

Load Generators
There is no data of this type.

Beam Loads : 1 LOAD CASE 1 live load


Beam Type Direction Fa Da Fb Db Ecc.
(m) (m)
2 UNI kN/m GY -300.000 - - - -

Beam Loads : 2 LOAD CASE dead load


Beam Type Direction Fa Da Fb Db Ecc.
(m) (m)
2 UNI kN/m GY -100.000 - - - -

Print Time/Date: 24/12/2016 15:12 STAAD.Pro V8i (SELECTseries 4) 20.07.09.31 Print Run 2 of 2

Potrebbero piacerti anche