Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DSR REPORT
11255 1 Excavation in foundation for retaining & breast walls in all types of soils and rocks 284.70 cu.m
7 including lead, lift and disposal of surplus material as per direction of engineer - in -
charge
11255 2 Random rubble stone masonry laid in mud mortar .(As per PWD Uttarakhand 2,015.40 cu.m
8 specifications)
11255 3 Random Rubble Masonary laid dry in breast wall,retaining wall, parapets,scupper 1,985.10 cu.m
9 etc. Including supply of all materials,labour,t & p& royality etc,required for proper
complition of work.(As per PWD Uttarakhand specifications)
11256 4 H.P stone filling in back of wallls including cost of all materials ,royality.t&p etc. 692.20 cu.m
0 complete.
11256 5 Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, 3,121.70 cu.m
1 retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P
and royaltiies etc.(As per PWD Uttarakhand specifications)
11256 6 Construction of coolie walling including supply of all material, labour, T&P etc. 1,155.80 cu.m
2 required for proper completion of the work.(As per PWD Uttarakhand
specifications)
11256 7 Cement plum masonry with 40% plum & 60% 1:3:7 cement concrete including 5,211.30 cu.m
4 supply of all material, labour, T&P etc. required for proper completion of the work.
(As per PWD Uttarakhand specifications)
11256 8 Supply and fabrication of steel truss bridge as per detailed drawing attached 77,790.10 M.T.
5 including supply of all structural steel confirming IS 226 - 1969 required for proper
completion of the bridge including ground errection of the bridge and one coat of
approved quality anticirrosive (red oxide) paint of confirming IS 5660, all T&P,
nuts and bolts, washers and also including supply and fixing of shop rivets required
as per drawing, required equipment shall be arranged by the contractor at his own
cost which shall be taken back by the contractor after satisfactory execution of the
job, the rates shall include ground errection in the workshop and its dismentling after
inspection, approval and removing defects, match marking of all parts, numbering
and proper stacking in the premises of workshop before cartage to site of work. The
work shall be executed in accordance to IS - 1915. The rates shall include cost of all
material, its wastage, cutting, bending if required, welding, making holes, shop
riveting, labour, T&P etc. required for proper completion of the work.
Specification:
11257 10-1 Type - A, "W" : Metal Beam Crash Barrier 3,061.30 metre
6 Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick
corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m
high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by
hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with
a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause
810 (Vertical post fixed in M15 cement concrete filled in standard pit of size 1.20m
x 0.45m x 0.45m)
11257 10-2 Type - B, "THRIE" : Metal Beam Crash Barrier 6,659.50 metre
7 Providing and erecting a "Thrie" metal beam crash barrier
comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above
road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm
spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts
and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367
and IS:1364, metal beam rail to be fixed on the vertical post with
a space of channel section 150 x 75 x 5 mm, 546 mm long
complete as per clause 810 (Vertical Post fixed in M15 Cement concrete filled in
standard pit of size 1.20m x 0.45m x 0.45m)
Specification:
11257 11 Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 5,373.50 cu.m
8 1:4:8 in foundations and floors including supply of all material, labour and T&P etc.
required for proper completion of the work.(Based on PWD specifications)
Specification:
11258 12-1 Tack coat using VG-10 grade bitumen @0.35kg/sqm,over normal bituminous 14.30 sq.m
3 surfaces
11258 12-2 Tack coat using VG-10 grade bitumen @0.40 kg/sqm, over dry and hungry 16.00 sq.m
4 bituminous surfaces
11258 12-3 Tack coat using VG-10 grade bitumen @ 0.40 kg/sqm, over granular surfaces 16.00 sq.m
5 treated with primer
11258 12-4 Tack coat using VG-10 grade bitumen @0.45 kg/sqm, over cement concrete 17.80 sq.m
6 pavement
Specification:
Chapter Name Premix Carpet (Including Tack Coat) as per PWD Specifications
Rate In (Rs)
Item Description Rate Unit
11258 13-1 Cleaning of the existing painted surface and laying 2 cm thick premix over a tack 228.10 sq.m
7 coat with graded approved grit and VG-30 grade bitumen including heating the
bitumen to the required temperature and mixing either in mixer or in hand drums,
including cartage of materials,maintenance of side patries, and watering them during
operation for proper completion of the work as directed by the engineer-in-charge.
11258 13-2 Cleaning of the WBM surface and laying 2 cm thick premix carpet over a tack coat 244.50 sq.m
8 with graded approved grit and VG-30 grade bitumen including heating the bitumen
to the required temperature and mixing either in mixer or in hand drums, including
cartage of materials, maintenance of side patries, and watering them during
operation for proper completion of the work as directed by the engineer-in-charge.
11258 13-3 Cleaning of the existing painted surface and laying 2 cm thick premix carpet over a 225.90 sq.m
9 tack coat with graded approved grit and VG-10 grade bitumen including heating the
bitumen to the required temperature and mixing either in mixer or in hand drums,
including cartage of materials,maintenance of side patries, and watering them during
operation for proper completion of the work as directed by the engineer-in-charge.
11259 13-4 Cleaning of the WBM surface and laying 2 cm thick premix carpet over a tack coat 240.90 sq.m
0 with graded approved grit and VG-10 grade bitumen including heating the bitumen
to the required temperature and mixing either in mixer or in hand drums, including
cartage of materials, maintenance of side patries, and watering them during
operation for proper completion of the work as directed by the engineer-in-charge.
Specification:
Chapter Name Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions size 3m x 1m x 1 m
Rate In (Rs)
Item Description Rate Unit
11259 12-1 Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped 7,207.00 Nos.
1 Gabions (Zinc plus PVC coated), of size 3mX1mX1m with two diaphragms at 1m
interval, having mesh opening 100mmx120 mm, mesh wire diameter 2.7mm/3.7mm,
edge/selvedge wire diameter 3.4/4.4 mm and lacing wire diameter 2.2/3.2 mm. (The
work includes filling boulders in the gabions).
11259 12-2 Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped 7,388.80 Nos.
2 Gabions (Zinc plus PVC coated), of size 3mX1mX1m with two diaphragms at 1m
interval, having mesh opening 100mmx120 mm, mesh wire diameter 2.7mm/3.7mm,
edge/selvedge wire diameter 3.4/4.4 mm and lacing wire diameter 2.2/3.2 mm. (The
work includes filling boulders in the gabions).
Specification:
11259 21 Brick on edge pavement with straight overburnt bricks laid on edge including 739.10 sq.m
3 preparation of subgrade to prescribed camber and including supply of bricks, filling
joints with local sand and spreading blinding coat 1cm(3/8")depth of local sand over
the entire surface and including supply of all materials, labour and T&P etc. required
for proper completion of the work.
11259 16 Cement Concrete Pavment:- 7,055.40 cu.m
4 Construction of Un-reinforced, Cement concrete pavement, thickness as per design,
over a prepeared sub base with 43 grade cement or any other type PCC Grade M-25
(Cement@404 kg/cum), coarse and fine aggregates conforming to IS: 383,
maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer
of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix
design, laid in approved fixed side formwork (Steel channel, laying and fixing of
wedges, steel plates including levelling the formwork and laying and fixing of 125
micron thick polythene film, as per drawing), spreading the concrete with shovels,
rakes, compacted using needle, and plate vibrators, finished in continuous operation
and curing of concrete slabs for 14 days, using curing compound where specified
and water finishing to lines and grade as per drawings and technical specifications.
11259 17 Random Coursed Rubble stone masonry in 1:6 cement and sand mortar in 4,467.40 cu.m
5 superstructure including supply of all materials, labour,T&P required for proper
completion of the work.
11259 18 Random Coursed Rubble stone masonry in 1:4 cement and sand mortar in 4,751.70 cu.m
6 superstructure including supply of all materials, labour,T&P required for proper
completion of the work.
Specification:
11259 19-1 Supplying and fixing of 24 mm dia rivets confirming to the latest IS Code including 151.70 Nos.
7 all labour, material, riveting gun, T&P etc. required for proper completion of the
work.
11259 19-2 Supplying and fixing of 22 mm dia rivets confirming to the latest IS Code including 149.50 Nos.
8 all labour, material, riveting gun, T&P etc. required for proper completion of the
work.
Specification:
11259 20 Erection of Steel Truss (Girder) Bridge as per drawing with required camber 0.00 M.T.
9 including cartage of fabricated parts from the place of stack near site including
submission of launching plan by the contractor, (duly weighted by a recognised
reputable institution/consultant if required) and approved by the engineer-in-charge.
Service bolts to used shall be of GKW make or any other as approved by
engineer-in-charge, including cost of all labor, T&P, equipments and consumables
required for proper completion of the work as per MORTH specification no. 1905
and as per directions of the engineer-in-charge.
{1. Add 12% extra ( of the cost of material resource i.e., rivets used in item no.
16-25) for Scaffolding, Ropes, Winch, Chain Pully, and all other T&P and
equipments.
2. For span more than 30 meters, add 1% per meter extra, but maximum 50 %, (of
the above cost of scaffolding etc. plus the total labour cost for erection of the
bridge).
3. For height more than 8.00 meters from river bed level, add 3% per meter extra,
but maximum 50 %, (of the above cost of scaffolding etc. plus the total labour cost
for erection of the bridge).}
11260 21 Providing and spreading RBM i.e., River Bed Material (treated as granular 1,535.10 cu.m
0 sub-base /base/surface course material) in uniform layers with motor grader on
prepared surface with rotavator and compacting with smooth wheeled roller to
achieve the desired density.
Specification:
11260 22-1 Clearance of land slides in soil and ordinary rock by a bull-dozer D 80 A-12, 180 71.60 cu.m
4 HP and disposal of the same on the valley side
11260 22-2 Clearing of land slide in hard rock requiring blasting for 50 per cent of the boulders 118.80 cu.m
5 and disposal of the same on the valley side(Using bull-dozer)
11260 22-3 Slip clearance (by manual means) of loose earth and other small loose materials 170.50 cu.m
6 including disposal as directed by the Engineer-in-charge.
11260 22-4 Slip clearance (by manual means) of earth and boulders including disposal as 171.30 cu.m
7 directed by the Engineer-in-charge.
11260 22-5 Slip clearance (by manual means) of boulders only including disposal as directed by 183.30 cu.m
8 the Engineer-in-charge.
Specification:
11260 23 Dewatering from foundation of abutments and wing walls including wages of 214.90 hours
9 operator and fuel including supply of all material, labour and T&P etc. required for
proper completion of the work.
11261 24 Providing and laying of Empty Cement Bags ( Gunny Bags) filled with local sand 22.80 bags
0 and tightened using sutli and carriage upto site including preparing subgrade before
placing in position, also including supply of all material, labour, T&P etc required
for proper completion of the work.
11261 25 Providing and laying of strip seal expansion joint catering to maximum horizontal 18,220.20 metre
1 movement upto 70mm( complete as per approved drawings and standard
specifications )to be installed by the manufacturer/supplier or their authorised
representative ensuring compliance to the manufacturer's instructions for
installation.
Specification:
Chapter Name Setting Out(Construction of Reference Pillars, Back Pillars and Job Pillars with per no. rates)
Rate In (Rs)
Item Description Rate Unit
11261 26-1 Construction of reference pillars(totally under ground) of length 200mm, width 72.00 Nos.
2 200mm and height 300mm) as per Fig. 1600.1 (b) and Technical Specification
Clause 1602.1 of MORD specifications for rural roads.
11261 26-2 Construction of back pillars , of length 300mm, width 300mm and height 400mm of 255.30 Nos.
3 which 100 mm shall be below ground level as per Fig. 1600.1 (b) and Technical
Specification Clause 1602.3 of MORD specifications for rural roads.
11261 26-3 Construction of Job pillers of length 400mm, width 400mm and height 600mm of 644.00 Nos.
4 which 100 mm shall be below ground level as per Fig. 1600.1 (d) and Technical
Specification Clause 1602.4 of MORD specifications for rural roads.
Specification:
11261 27 High tensile steel wires / strands including all accessories for stressing, stressing 1,287.20 metre
5 operations and grouting complete as per drawings and technical specifications.
Specification:
11261 29-1 Dense graded bituminous macadam for grading I 37.5mm nominal size (bitumen @ 10,264.70 cu.m
6 4.25% by weight of total mix has been taken for analysis purpose)
11261 29-2 Dense graded bituminous macadam for grading II 26.5 mm nominal size(bitumen @ 8,921.00 cu.m
7 4.25% by weight of total mix has been taken for analysis purpose)
Specification:
11261 30-1 Grading I - 19 mm (Nominal Size) : Bitumen @ 5% of the weight of total mix) 9,487.50 cu.m
8
11261 30-2 Grading - II-13.2 mm (Nominal Size) : Bitumen @ 5 % of the weight of total mix 9,652.30 cu.m
9
Specification:
11262 31 Extra for vaccum dewatering in fresh concrete work, including levelling with screed 168.90 cu.m
0 vibrator, removing excess water through vaccum pump with bottom and top filter
mats, duly sealing the edges al round, finishing with power floater and brooming
with wire brush etc., complete as per specifications and directions of the
Engineer-in-Charge.(The panel shuttering work shall be paid separately).The rates
are for one cum of concrete.
11262 32 Providing and laying of stone set pavement over 2.5 cm thick bedding layer of PCC 665.20 sq.m
1 1:1.5:3, which shall further be placed over 10 cm thick dry stone kharanja or crushed
stones base over a prepared subgrade as per drawings and technical specifications.
The size of stones shall not be less than 20 cm x 20 cm and thickness of stones shall
vary from 10 cm to 15 cm. The work includes filling of joints with PCC 1:1.5:3 as
per the standard drawings and instructions of the Engineer-in-Charge.
Specification:
11263 36 Providing and laying of hot applied thermoplastic compound of ISI Mark 633.60 sq.m
6 Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms
per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from
streaks and holes.
11263 37 Supplying and installation of delineators (road way indicators,hazard markers, 466.40 each
7 object markers), 80-100 cm high above ground
level, painted black and white in 15 cm wide strips, fitted with 80 x100 mm
rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed
into the ground and conforming to IRC-79 and the drawings.
Specification:
Providing and applying low viscosity bitumen emulsion for sealing cracks less than 3 mm wide or incipient fretting
or disintegration in an existing bituminous surfacing.
Rate In (Rs)
Item Description Rate Unit
Chapter Name Providing and laying microsurfacing course for crack prevention and periodic renewal treatment of roads
Rate In (Rs)
Item Description Rate Unit
11264 40-1 Providing and laying microsurfacing course, comprising of dry fine aggregates 164.50 sq.m
3 conforming to Type II grading of specification as per IRC: SP-81-2008,
polymer /latex modified cationic bitumen emulsion, Ordinary portland cement as
filler, chemical additives and water in proportion (Fine aggregate Type II grading @
9.6 kg/sqm, modified emulsion @ 8.5 % by weight of dry aggregates, Cement @
1.25 % by weight of dry aggregate and Additive @ 1.25 % by weight of dry
aggregate) including proportioning, mixing and laying of microsurfacing coarse
using mechanised machine and laying unit all complete as per IRC SP-81 and
MORTH specifications and direction of Engineer in Charge.
11264 40-2 Providing and laying microsurfacing course, comprising of dry fine aggregates 190.20 sq.m
5 conforming to Type III grading of specification as per IRC: SP-81-2008,
polymer /latex modified cationic bitumen emulsion, Ordinary portland cement as
filler, chemical additives and water in proportion (Fine aggregate Type III grading
@ 13.7 kg/sqm, modified emulsion @ 8 % by weight of dry aggregates, Cement @
1.25 % by weight of dry aggregate and Additive @ 1.25 % by weight of dry
aggregate) including proportioning, mixing and laying of microsurfacing coarse
using mechanised machine and laying unit all complete as per IRC SP-81 and
MORTH specifications and direction of Engineer in Charge.
Specification:
11264 41 Providing edge stones on valley side of formation as per drawing and technical 113.50 Nos.
4 specification clause 1608.2.6 (Per No.)
Specification:
Chapter Name Cleaning of scupper and catchpit including disposal of surplus material within boundary, also including dressing,
levelling and ramming of same as directed by the Engineer-in Charge.
Rate In (Rs)
Item Description Rate Unit
11264 42-1 Cleaning of fully choked scupper and catchpit 2,045.30 Nos.
7
11264 42-2 Cleaning of partially choked scupper and catchpit 1,022.60 Nos.
9
Specification:
11265 46-(i) Supply and fixing of Plastic Spring Post 750 mm high and 100 mm in dia (having 2 21.40 Nos.
5 strips of 75 mm wide retroreflectory tape fixed around the post) with base dia 400
mm fixed to the ground with adhesive and nuts and bolts.
11265 46-(ii) Supply and fixing of Plastic Spring Post 900 mm high and 100 mm in dia (having 2 21.40 Nos.
6 strips of 75 mm wide retroreflectory tape fixed around the post) with base dia 400
mm fixed to the ground with adhesive and nuts and bolts.
Specification:
11265 47 Supply and fixing of MS delineators 1000 mm long, having a diameter of 75 mm 655.40 Nos.
7 and thickness 4 mm and having atleast 3 different colour strips of 75 mm wide
retroreflective tape around the black painted pole attached with 150 mm x 25 mm x
6 mm MS flats welded at bottom to be fixed in M15 conctete base.
Specification:
11265 48-(i) Supply of PVC Traffice Cones of 600 mm height and 3 Kg. weight square base and 204.50 Nos.
8 2 strips of 10 mm wide reflectorised sheets around the cone.
11265 48-(ii) Supply of PVC Traffice Cones of 750 mm height and 3.5 Kg. weight square base 204.50 Nos.
9 and 3 strips of 10 mm wide reflectorised sheets around the cone.
11266 48-(iii) Supply of PVC Traffice Cones of 900 mm height and 4.0 Kg. weight square base 204.50 Nos.
0 and 3 strips of 10 mm wide reflectorised sheets around the cone.
Specification:
11266 49 Providing and laying of hot applied thermoplastic compound of ISI Mark Approved 599.50 sq.m
1 Quality of 2.5 mm thick inclusing reflectorising glass beads @ 250 gms. per sqm.
area, as per IRC : 35, The finished surface to be level, uniform and free from streaks
and holes.
Specification: