Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Features
Modular pluggable technology, easy tool onsite maintenance;
Honeycomb briquette burning effect and the whole structure cooling
technology;
Double-coupling IP68 protection, highest waterproof level;
Metal structure, high mechanical strength;
Ergonomic light distribution to achieve uniform illuminating effect;
Free modular serialization and full power range solution.
Applications
Street lighting
Parking lots
Roadway lighting
Path lighting
Standard Colors
White
Gray
Black
Advantages
3000
1050 60 100 5 6000300 Batwing
AC100-240 4000
(Type I II III IV Lumileds 70
50/60 5000
700 80 110 5 8800400 IV)
5700
Warranty
5-year limited warranty is standard on luminaire and components.
Specifications
Street Light T1B
T1B Series
Light Distributions
M8B LED module
T2S2322 T3M1321
IESNA Type II Short IESNA Type III Medium
Specifications
Street Light T1B
T1B Series
Aluminum Housing
2 X Latches Design
Tool free maintenance
Specifications
Street Light T1B
T1B Series
Mounting Bracket
LED Driver
With 4 stainless steel screws
Dimensions
500
T1B-1
295 88
500
T1B-2
295 88
T1B -1 -2
11
L 500mm(1 ft 7 /16 inch)
39
W 295mm (11 /64 inch)
35
H 90mm (3 /64 inch)
1 31
D 57-63mm (2 /4 inch -2 /64 inch)
Specifications
Street Light T1B
T1B Series
Installation
1. Pull the two latches at side, then 2. Loosen the four screws on the 3. Connect the ground wire, neutral
open the cover. mounting bracket. wire and live wire to the AC input
(make sure it sufficiently grounded).
4. Insert the pole to the lamp after 5. Tighten up the screws on the 6. Close the cover, then press and
connecting the wire. mounting bracket. fasten the latches.
Specifications
Street Light T1B
T1B Series
Maintenance
Driver & Electrical Parts
1. Pull the two latches at side, then 2. Disconnect the driver from the AC 3. Unscrew the screws at ends of the
open the cover. input. driver.
4 Unscrew the waterproof connector to 5. Replace the failed driver with a new 6. Close the cover. Then press and
the driver one. Tighten up all the screws and the fasten the latches.
connector. Re-connect to the wires of
AC input.
Specifications
Street Light T1B
T1B Series
Module
1. Pull the two latches at side, then 2. Unscrew the two screws at ends of 3. Unscrew the waterproof connector to
open the cover. the failed module. the failed module.
4. Take out the failed module and 5. Align and tighten up the connector, 6. Close the cover. Then press and
replace with a new one. and the screws for the new module. fasten the latches.
Specifications
Street Light T1B
T1B Series
Spin the male terminal clockwise. When the male indicatrix points between indicatrix female #2 and #3, and the gap
between male and female terminals is extremely small, the connectors are well connected; otherwise, there will be risks in
its waterproof performance.
When the gap between male and female terminals is extremely small, if any looseness can be sensed, please spin the male
terminal clockwise until tight.