Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MEX-N5050BT
Be sure to install this unit in the dashboard of the
car for safety.
For installation and connections, see the
supplied installation/connections manual.
2GB
Remember, in order to make or receive calls, the
Notes on BLUETOOTH function handsfree and the electronic device connected to
the handsfree must be switched on in a service area
Caution with adequate cellular signal strength.
IN NO EVENT SHALL SONY BE LIABLE FOR ANY Emergency calls may not be possible on all cellular
INCIDENTAL, INDIRECT OR CONSEQUENTIAL phone networks or when certain network services
DAMAGES OR OTHER DAMAGES INCLUDING, and/or phone features are in use.
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF Check with your local service provider.
REVENUE, LOSS OF DATA, LOSS OF USE OF THE
PRODUCT OR ANY ASSOCIATED EQUIPMENT,
DOWNTIME, AND PURCHASERS TIME RELATED TO
OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS
HARDWARE AND/OR ITS SOFTWARE.
IMPORTANT NOTICE!
Safe and efficient use
Changes or modifications to this unit not expressly
approved by Sony may void the users authority to
operate the equipment.
Please check for exceptions, due to national
requirement or limitations, in usage of BLUETOOTH
equipment before using this product.
Driving
Check the laws and regulations on the use of
cellular phones and handsfree equipment in the
areas where you drive.
Always give full attention to driving and pull off the
road and park before making or answering a call if
driving conditions so require.
Emergency calls
This BLUETOOTH car handsfree and the electronic
device connected to the handsfree operate using
radio signals, cellular, and landline networks as well
as user-programmed function, which cannot
guarantee connection under all conditions.
Therefore do not rely solely upon any electronic
device for essential communications (such as
medical emergencies).
3GB
DISPLAY Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Table of Contents COLOR (preset color - dynamic color
illuminator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . 5 CUSTOM-C (custom color) . . . . . . . . . . . . . . . . 17
SND SYNC (sound synchronization) . . . . . . . . 17
Getting Started WHT MENU (white menu) . . . . . . . . . . . . . . . . 18
Detaching the Front Panel . . . . . . . . . . . . . . . . . . . . 6 START-WHT (start white) . . . . . . . . . . . . . . . . . 18
Switching the FM/AM Tuning Step . . . . . . . . . . . . . 6 BT (BLUETOOTH) Setup . . . . . . . . . . . . . . . . . . . . . 18
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BT INIT (BLUETOOTH initialize). . . . . . . . . . . . . 18
Preparing a BLUETOOTH Device. . . . . . . . . . . . . . . . 7 APP REM (App Remote) Setup . . . . . . . . . . . . . . . 18
Connecting an iPod/USB Device . . . . . . . . . . . . . . . 9
Connecting Other Portable Audio Device . . . . . . . . 9 Additional Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Listening to the Radio Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Listening to the Radio. . . . . . . . . . . . . . . . . . . . . . . . 9 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using Radio Data System (RDS) . . . . . . . . . . . . . . . 10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Playback
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Playing an iPod/USB Device. . . . . . . . . . . . . . . . . . 10
Playing a BLUETOOTH Device. . . . . . . . . . . . . . . . . 11
Searching and Playing Tracks. . . . . . . . . . . . . . . . . 11
Handsfree Calling
Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Available Operations during Call . . . . . . . . . . . . . . 13
Useful Functions
App Remote with iPhone/Android Phone . . . . . . 14
Settings
Canceling the DEMO Mode . . . . . . . . . . . . . . . . . . 15
Basic Setting Operation . . . . . . . . . . . . . . . . . . . . . 15
GENERAL Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SOUND Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
EQ10 PRESET . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
EQ10 SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . 16
POSITION (listening position) . . . . . . . . . . . . . . 16
RB ENH (rear bass enhancer) . . . . . . . . . . . . . . 16
SW DIREC (subwoofer direct connection) . . . . 17
4GB
Guide to Parts and Controls
Main unit
5GB
PTY (program type)
Select PTY in RDS.
AUX input jack Getting Started
USB port
Detaching the Front Panel
RM-X231 Remote You can detach the front panel of this unit to
prevent theft.
1 Press and hold OFF .
The unit is turned off.
2 Press the front panel release button ,
then remove the panel by pulling it
towards you.
Caution alarm
If you turn the ignition switch to the OFF position
without detaching the front panel, the caution
alarm will sound for a few seconds. The alarm will
only sound if the built-in amplifier is used.
Serial numbers
Make sure the serial numbers on the bottom of the
The VOL (volume) + button has a tactile dot. unit and the back of the front panel are matched
correctly. Otherwise you cannot make BLUETOOTH
Remove the insulation film before use. pairing, connection and disconnection by NFC.
()/ ()
VOL (Volume) +/
SOUND
Open the SOUND menu directly.
-MENU
Press and hold to open the setup menu.
(+)/ ()
Switching the FM/AM Tuning
DSPL (display)/-SCRL(scroll) Step
Change display items. Press and hold to scroll a Set the FM/AM tuning step of your country. This
display item. setting appears when this unit is turned off.
1 Press MENU, rotate the control dial to
select [GENERAL], then press it.
2 Rotate the control dial to select [TUNER-
STP], then press it.
6GB
3 Rotate the control dial to select from 4 Select [Sony Car Audio] shown in the
[50K/9K], [100K/10K] or [200K/10K], then display of the BLUETOOTH device.
press it. If [Sony Car Audio] does not appear, repeat from
step 2.
You can enjoy music, or perform handsfree calling, 6 Select this unit on the BLUETOOTH device
by connecting a suitable BLUETOOTH device. For to establish the BLUETOOTH connection.
details on connecting, refer to the operating or lights up when the connection is
instructions supplied with the device. made.
Before connecting the device, turn down the
Note
volume of this unit; otherwise, loud sound may
While connecting to a BLUETOOTH device, this unit
result. cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
Pairing and connecting with a
To cancel pairing
BLUETOOTH device
Perform step 2 to cancel the pairing mode after this
When connecting a BLUETOOTH device (cellular unit and the BLUETOOTH device are paired.
phone, audio device, etc.) for the first time, mutual
registration (called pairing) is required. Pairing
enables this unit and other devices to recognize Connecting with a paired BLUETOOTH
each other. device
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
7GB
3 Operate the BLUETOOTH device to 2 Touch the N-Mark part of the unit with
connect to this unit. the N-Mark part of the smartphone.
or lights up.
Note
While streaming BLUETOOTH audio, you cannot Connecting with an iPhone/iPod
connect from this unit to the cellular phone. Connect
from the cellular phone to this unit instead. (BLUETOOTH Auto Pairing)
Tip When an iPhone/iPod with iOS5 or later installed is
With BLUETOOTH signal on: when the ignition is turned
connected to the USB port, the unit is paired and
to on, this unit reconnects automatically to the last-
connected cellular phone. connected with the iPhone/iPod automatically.
To enable BLUETOOTH Auto Pairing, make sure
To install the microphone [AUTO PAIRING] in BT setup is set to [ON] (page 18).
For details on how to connect the microphone, refer
to the supplied Installation/Connections guide.
1 Activate the BLUETOOTH function on the
iPhone/iPod.
touch (NFC)
By touching the control dial on the unit with an
NFC* compatible smartphone, the unit is paired and
connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones and
IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated location Make sure that lights up on the display of the
on NFC compatible devices. unit.
Notes
For a smartphone with Android OS 4.0 or lower
BLUETOOTH Auto Pairing is not possible if the unit is
installed, downloading the app NFC Easy Connect already connected to another BLUETOOTH device. In
available at Google Play is required. The app may this case, disconnect the other device, then connect
not be downloadable in some countries/regions. the iPhone/iPod again.
If BLUETOOTH Auto Pairing is not established, see
1 Activate the NFC function on the Preparing a BLUETOOTH Device for details (page 7).
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
8GB
Connecting an iPod/USB Device
Listening to the Radio
1 Turn down the volume on the unit.
2 Connect the iPod/USB device to the unit. Listening to the Radio
To connect an iPod/iPhone, use the USB
Tuning step setting is required (page 6).
connection cable for iPod (not supplied).
To listen to the radio, press SRC to select [TUNER].
When connecting iPhone 5
Audio Device
Tuning
1 Turn off the portable audio device.
1 Press MODE to change the band (FM1,
2 Turn down the volume on the unit.
FM2, FM3, AM1 or AM2).
3 Connect the portable audio device to the
2 Perform tuning.
AUX input jack (stereo mini jack) on the
To tune manually
unit with a connecting cord (not
Press and hold SEEK +/ to locate the
supplied)*. approximate frequency, then press SEEK +/
* Be sure to use a straight type plug. repeatedly to fine adjust to the desired
frequency.
To tune automatically
Press SEEK +/.
Scanning stops when the unit receives a station.
Repeat this procedure until the desired station
is received.
Storing manually
4 Press SRC to select [AUX]. 1 While receiving the station that you want
To match the volume level of the connected to store, press and hold a number button
device to other sources (1 to 6) until [MEM] appears.
Start playback of the portable audio device at a
moderate volume, and set your usual listening
volume on the unit.
Receiving the stored stations
Press MENU and rotate the control dial.
Select [SOUND] [AUX VOL] (page 17).
1 Select the band, then press a number
button (1 to 6).
9GB
Using Radio Data System (RDS)
Playback
Selecting program types (PTY) Playing a Disc
Use PTY to display or search for a desired program
type. 1 Insert the disc (label side up).
Type of programs
To stop playback
Press and hold OFF for 1 second.
10GB
To remove the device
Stop playback, then remove the device. Searching and Playing Tracks
Caution for iPhone
When you connect an iPhone via USB, phone call Repeat play and shuffle play
volume is controlled by the iPhone, not the unit. Do
not inadvertently increase the volume on the unit 1 During playback, press (repeat) for
during a call, as sudden loud sound may result
Repeat play, or (shuffle) for Shuffle
when the call ends.
play.
11GB
5 Rotate the control dial to select the
desired item, then press it.
Playback starts. Handsfree Calling
Receiving a Call
1 Press CALL when a call is received with a
ringtone.
The phone call starts.
Note
The ringtone and talkers voice are output only from the
front speakers.
Making a Call
You can make a call from the phonebook or call
history when a cellular phone supporting PBAP
(Phone Book Access Profile) is connected.
12GB
2 Rotate the control dial to select a name
Calling by voice tags
or phone number from the call history,
then press it. You can make a call by saying the voice tag stored
The phone call starts. in a connected cellular phone that has a voice
dialing function.
Calling by phone number input 1 Press CALL, rotate the control dial to
select [VOICE DIAL], then press it.
1 Press CALL, rotate the control dial to Alternatively, press ENTER while the App
select [DIAL NUMBER], then press it. Remote function is off.
2 Rotate the control dial to enter the 2 Say the voice tag stored on the cellular
phone number, and lastly select [ ] phone.
(space), then press ENTER*. Your voice is recognized, and the call is made.
The phone call starts.
To cancel voice dialing
* To move the digital indication, press SEEK +/. Press ENTER.
Note
[_] appears instead of [#] on the display.
13GB
Establishing the App Remote
Useful Functions connection
1 Connect iPhone to the USB port or
App Remote with iPhone/ Android phone with the BLUETOOTH
Android Phone function.
14GB
Activating voice recognition (Android
phone only)
Settings
By registering applications, you can control an
application by voice command. For details, refer to
the help of the application. Canceling the DEMO Mode
To activate voice recognition You can cancel the demonstration display which
appears while this unit is turned off.
1 Press ENTER to activate voice recognition.
2 Say the desired voice command into the 1 Press MENU, rotate the control dial to
microphone when [Say Source or App] appears on select [DISPLAY], then press it.
the Android phone.
2 Rotate the control dial to select [DEMO],
then press it.
3 Rotate the control dial to select [DEMO-
OFF], then press it.
The setting is complete.
4 Press (back) twice.
Notes The display returns to normal reception/play
Voice recognition may not be available in some cases. mode.
Voice recognition may not work properly depending
on the performance of the connected Android phone.
Operate under conditions where noise such as engine
sound is minimized during voice recognition. Basic Setting Operation
When a music or video application is You can set items in the menu to the following
selected* procedure.
Press 1 or 2 to enter HID mode, and press SEEK +/ The following items can be set depending on the
to select a playback item, then press ENTER to start source and setting.
playback.
1 Press MENU.
* Available only for an Android phone supporting
HID (Human Interface Device Profile). 2 Rotate the control dial to select the setup
category, then press it.
Making sound settings Setup categories are follows:
GENERAL setup (page 15)
You can adjust the settings for EQ, BAL/FAD/SW
SOUND setup (page 16)
Level and Position via your smartphone.
DISPLAY setup (page 17)
BT (BLUETOOTH) setup (page 18)
APP REM (App Remote) setup (page 18)
3 Rotate the control dial to select the
options, then press it.
GENERAL Setup
CLOCK-ADJ (clock adjust) (page 7)
15GB
BEEP POSITION (listening position)
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [NO], [30S] (30
seconds), [30M] (30 minutes), [60M] (60
minutes).
16GB
LPF FREQ (low pass filter frequency)
BTA VOL (BLUETOOTH audio volume level)
Selects the subwoofer cut-off frequency: [50Hz],
Adjusts the volume level for each connected
[60Hz], [80Hz], [100Hz], [120Hz].
BLUETOOTH device: [+6 dB] [0 dB] [-6 dB].
LPF SLOP (low pass filter slope)
This setting negates the need to adjust the
Selects the LPF slope: [1], [2], [3].
volume level between sources.
SW DIREC (subwoofer direct connection)
You can use the subwoofer without a power * Does not appear when [SET F/R POS] is set to [OFF].
amplifier when it is connected to the rear
speaker cord. (Available only when [RBE MODE]
is set to [OFF].)
Be sure to connect a 4 - 8 ohm subwoofer to
DISPLAY Setup
either of the rear speaker cords. Do not connect
a speaker to the other rear speaker cord. DEMO (demonstration)
SW MODE (subwoofer mode) Activates the demonstration: [ON], [OFF].
Selects the subwoofer mode: [1], [2], [3], [OFF].
BLK OUT (black out)
SW PHASE (subwoofer phase)
Turns off the illumination automatically for any
Selects the subwoofer phase: [NORM], [REV].
source (e.g., during radio reception/CD
SW POS* (subwoofer position)
playback, etc.) if no operation is performed for 5
Selects the subwoofer position: [NEAR],
seconds: [ON], [OFF].
[NORMAL], [FAR].
To turn the light back on, press any button on
LPF FREQ (low pass filter frequency)
the unit or the remote commander.
Selects the subwoofer cut-off frequency: [50Hz],
[60Hz], [80Hz], [100Hz], [120Hz]. DIMMER
LPF SLOP (low pass filter slope) Changes the display brightness.
Selects the LPF slope: [1], [2], [3]. AT (auto)
Dims the display automatically when you turn
S.WOOFER (subwoofer)
lights on. (Available only when the illumination
SW LEVEL (subwoofer level)
control lead is connected.)
Adjusts the subwoofer volume level:
ON
[+10 dB] [0 dB] [-10 dB].
Dims the display.
([ATT] is displayed at the lowest setting.)
OFF
SW PHASE (subwoofer phase)
Deactivates the dimmer.
Selects the subwoofer phase: [NORM], [REV].
SW POS* (subwoofer position) COLOR (preset color - dynamic color illuminator)
Selects the subwoofer position: [NEAR], Sets a preset color for the display and buttons
[NORMAL], [FAR]. on the main unit.
LPF FREQ (low pass filter frequency) Selects from 12 preset colors, 1 customized color
Selects the subwoofer cut-off frequency: [50Hz], and 5 preset patterns.
[60Hz], [80Hz], [100Hz], [120Hz].
LPF SLOP (low pass filter slope) CUSTOM-C (custom color)
Selects the LPF slope: [1], [2], [3]. Registers a customized color for the display and
buttons.
HPF (high pass filter) BASE
HPF FREQ (high pass filter frequency) Selects a preset color as a basis for further
Selects the front/rear speaker cut-off frequency: customizing: [RGB RED], [RGB GRN],
[OFF], [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. [RGB BLUE].
HPF SLOP (high pass filter slope) Adjustable color range: [0] [32] ([0] cannot be
Selects the HPF slope (effective only when [HPF set for all color ranges).
FREQ] is set to other than [OFF]): [1], [2], [3]. DAYNIGHT
Sets a different color for DAY/NIGHT mode
AUX VOL (AUX volume level)
according to the dimmer setting.
Adjusts the volume level for each connected
[DAY]: [DIMMER] sets to [OFF] or [AUTO] (turn
auxiliary device: [+18 dB] [0 dB] [-8 dB].
off the head light).
This setting negates the need to adjust the
[NIGHT]: [DIMMER] sets to [ON] or [AUTO] (turn
volume level between sources.
on the head light).
17GB
WHT MENU (white menu)
You can display the menu more clearly (white)
without concern for color setting: [ON], [OFF]. Additional Information
START-WHT (start white)
When SRC is pressed, the display and buttons on Precautions
the main unit turn white once, then change to Cool off the unit beforehand if your car has been
the customized color: [ON], [OFF]. parked in direct sunlight.
Do not leave the front panel or audio devices
AUTO SCR (auto scroll) brought in inside the car, or it may cause
Scrolls long items automatically: [ON], [OFF]. malfunction due to high temperature in direct
sunlight.
Power antenna (aerial) extends automatically.
18GB
If the multi-session disc begins with a CD-DA Made for iPod and Made for iPhone mean that
session, it is recognized as a CD-DA disc, and an electronic accessory has been designed to
other sessions are not played back. connect specifically to iPod or iPhone,
Discs that this unit CANNOT play respectively, and has been certified by the
CD-R/CD-RW of poor recording quality. developer to meet Apple performance standards.
CD-R/CD-RW recorded with an incompatible Apple is not responsible for the operation of this
recording device. device or its compliance with safety and
CD-R/CD-RW which is finalized incorrectly. regulatory standards. Please note that the use of
CD-R/CD-RW other than those recorded in this accessory with iPod or iPhone may affect
music CD format or MP3 format conforming to wireless performance.
ISO9660 Level 1/Level 2, Joliet/Romeo or multi-
session.
About BLUETOOTH function
Playback order of MP3/WMA files What is BLUETOOTH technology?
BLUETOOTH wireless technology is a short-range
MP3/WMA Folder (album) wireless technology that enables wireless data
communication between digital devices, such as
MP3/WMA file (track) a cellular phone and a headset. BLUETOOTH
wireless technology operates within a range of
about 10 m (33 ft). Connecting two devices is
common, but some devices can be connected to
multiple devices at the same time.
You do not need to use a cable for connection
since BLUETOOTH technology is a wireless
technology, neither is it necessary for the devices
to face one another, such is the case with infrared
technology. For example, you can use such a
device in a bag or pocket.
BLUETOOTH technology is an international
standard supported by millions of companies all
over the world, and employed by various
About iPod companies worldwide.
19GB
Microwaves emitting from a BLUETOOTH device
may affect the operation of electronic medical
devices. Turn off this unit and other BLUETOOTH
Maintenance
devices in the following locations, as it may cause
Replacing the lithium battery of the remote
an accident.
where inflammable gas is present, in a hospital, commander
train, airplane, or petrol station When the battery becomes weak, the range of the
near automatic doors or a fire alarm remote commander becomes shorter. Replace the
This unit supports security capabilities that battery with a new CR2025 lithium battery. Use of
comply with the BLUETOOTH standard to provide any other battery may present a risk of fire or
a secure connection when the BLUETOOTH explosion.
wireless technology is used, but security may not + side up
be enough depending on the setting. Be careful
when communicating using BLUETOOTH wireless
technology.
We do not take any responsibility for the leakage
of information during BLUETOOTH
communication.
Connection with all BLUETOOTH devices cannot
be guaranteed.
A device featuring BLUETOOTH function is Notes on the lithium battery
Keep the lithium battery out of the reach of children.
required to conform to the BLUETOOTH
Should the battery be swallowed, immediately
standard specified by BLUETOOTH SIG, and be consult a doctor.
authenticated. Wipe the battery with a dry cloth to assure a good
Even if the connected device conforms to the contact.
above mentioned BLUETOOTH standard, some Be sure to observe the correct polarity when installing
devices may not be connected or work the battery.
correctly, depending on the features or Do not hold the battery with metallic tweezers,
specifications of the device. otherwise a short-circuit may occur.
While talking on the phone hands free, noise
WARNING
may occur, depending on the device or
Battery may explode if mistreated.
communication environment.
Do not recharge, disassemble, or dispose of in
Depending on the device to be connected, it may
fire.
require some time to start communication.
Notes
For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
Never touch the connectors directly with your fingers
or with any metal device.
20GB
Compatible BLUETOOTH Profiles*2:
Specifications A2DP (Advanced Audio Distribution Profile) 1.3
AVRCP (Audio Video Remote Control Profile) 1.5
HFP (Handsfree Profile) 1.6
Tuner section PBAP (Phone Book Access Profile)
FM SPP (Serial Port Profile)
Tuning range: MAP (Message Access Profile)
87.5 108.0 MHz (at 50 kHz step) HID (Human Interface Device Profile)
87.5 108.0 MHz (at 100 kHz step)
*1 The actual range will vary depending on factors such
87.5 107.9 MHz (at 200 kHz step) as obstacles between devices, magnetic fields
FM tuning step: around a microwave oven, static electricity,
50 kHz/100 kHz/200 kHz switchable reception sensitivity, antenna (aerial)s performance,
Antenna (aerial) terminal: operating system, software application, etc.
External antenna (aerial) connector *2 BLUETOOTH standard profiles indicate the purpose
Intermediate frequency: 25 kHz of BLUETOOTH communication between devices.
Usable sensitivity: 8 dBf
Power amplifier section
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo) Output: Speaker outputs
Separation: 50 dB at 1 kHz Speaker impedance: 4 8 ohms
Frequency response: 20 15,000 Hz Maximum power output: 55 W 4 (at 4 ohms)
AM General
Tuning range: Outputs:
531 1,602 kHz (at 9 kHz step) Audio outputs terminal (front, rear, sub)
530 1,710 kHz (at 10 kHz step) Power antenna (aerial)/Power amplifier control
AM tuning step: terminal (REM OUT)
9 kHz/10 kHz switchable Inputs:
Antenna (aerial) terminal: Remote controller input terminal
External antenna (aerial) connector Antenna (aerial) input terminal
Intermediate frequency: MIC input terminal
9,124.5 kHz or 9,115.5 kHz/4.5 kHz (at 9 kHz step) AUX input jack (stereo mini jack)
9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step) USB port
Sensitivity: 26 V Power requirements: 12 V DC car battery (negative
ground (earth))
CD Player section Dimensions:
Signal-to-noise ratio: 120 dB Approx. 178 mm 50 mm 177 mm
Frequency response: 10 20,000 Hz (7 1/8 in 2 in 7 in) (w/h/d)
Wow and flutter: Below measurable limit Mounting dimensions:
Corresponding codec: MP3 (.mp3) and WMA (.wma) Approx. 182 mm 53 mm 160 mm
(7 1/4 in 2 1/8 in 6 5/ 16 in) (w/h/d)
USB Player section Mass: Approx. 1.2 kg (2 lb 11 oz)
Interface: USB (High-speed) Package contents:
Maximum current: 1 A Main unit (1)
The maximum number of recognizable tracks: Remote commander (1): RM-X231
10,000 Microphone (1)
Corresponding codec: Parts for installation and connections (1 set)
MP3 (.mp3), WMA (.wma) and WAV (.wav)
Your dealer may not handle some of the above
Wireless Communication listed accessories. Please ask the dealer for detailed
information.
Communication System:
BLUETOOTH Standard version 3.1 Design and specifications are subject to change
Output: without notice.
BLUETOOTH Standard Power Class 2
(Max. +4 dBm)
Maximum communication range:
Line of sight approx. 10 m (33 ft)*1
Frequency band:
2.4 GHz band (2.4000 2.4835 GHz)
Modulation method: FHSS
21GB
Copyrights
Troubleshooting
The Bluetooth word mark and logos are registered The following checklist will help you remedy
trademarks owned by Bluetooth SIG, Inc. and any problems you may encounter with your unit.
use of such marks by Sony Corporation is under Before going through the checklist below, check
license. Other trademarks and trade names are the connection and operating procedures.
those of their respective owners. For details on using the fuse and removing the unit
from the dashboard, refer to the installation/
The N-Mark is a trademark or registered trademark connections manual supplied with this unit.
of NFC Forum, Inc. in the United States and in other If the problem is not solved, visit the support site on
countries. the back cover.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United General
States and/or other countries.
No power is being supplied to the unit.
This product is protected by certain intellectual If the unit is turned off and the display
property rights of Microsoft Corporation. Use or disappears, the unit cannot be operated with the
distribution of such technology outside of this remote commander.
product is prohibited without a license from Turn on the unit.
Microsoft or an authorized Microsoft subsidiary.
No sound.
iPhone, iPod, iPod classic, iPod nano, and iPod The position of the fader control [FADER] is not
touch are trademarks of Apple Inc., registered in set for a 2-speaker system.
the U.S. and other countries. App Store is a service
mark of Apple Inc. No beep sound.
An optional power amplifier is connected and
MPEG Layer-3 audio coding technology and patents you are not using the built-in amplifier.
licensed from Fraunhofer IIS and Thomson.
The contents of the memory have been erased.
Google, Google Play and Android are trademarks of The power supply lead or battery has been
Google Inc. disconnected or not connected properly.
22GB
For your safety, do not reset the unit while you
A USB device takes longer to play back.
are driving.
The USB device contains files with a complicated
tree structure.
Radio reception
The sound is intermittent.
Stations cannot be received. The sound may be intermittent at a high-bit-rate
The sound is hampered by noises. of more than 320 kbps.
The connection is not correct.
If your car has built-in radio antenna (aerial) in Application name is mismatched with the actual
the rear/side glass, connect an REM OUT lead application in App Remote.
(blue/white striped) or accessory power supply Launch the application again from the App
lead (red) to the power supply lead of a cars Remote application.
antenna (aerial) booster.
Check the connection of the car antenna
(aerial). NFC function
If the auto antenna (aerial) will not extend,
One touch connection (NFC) is not possible.
check the connection of the power antenna
If the smartphone does not respond to the
(aerial) control lead.
touching.
The tuning step setting has been erased.
Check that the NFC function of the smartphone
Set the tuning step again (page 6).
is turned on.
Move the N-Mark part of the smartphone
Preset tuning is not possible.
closer to the N-Mark part on this unit.
The broadcast signal is too weak.
If the smartphone is in a case, remove it.
NFC receiving sensitivity depends on the device.
RDS If One touch connection with the smartphone
fails several times, make BLUETOOTH connection
PTY displays [- - - - - - - -]. manually.
The current station is not an RDS station.
RDS data has not been received.
The station does not specify the program type. BLUETOOTH function
The connecting device cannot detect this unit.
CD playback Before the pairing is made, set this unit to pairing
standby mode.
The disc does not play back. While connected to a BLUETOOTH device, this
Defective or dirty disc. unit cannot be detected from another device.
The CD-R/CD-RW is not for audio use (page 18). Disconnect the current connection and search
for this unit from another device.
MP3/WMA files cannot be played back.
When the device pairing is made, set the
The disc is incompatible with the MP3/WMA BLUETOOTH signal output to on (page 7).
format and version. For details on playable discs
and formats, visit the support site. Connection is not possible.
The connection is controlled from one side (this
MP3/WMA files take longer to play back than
unit or BLUETOOTH device), but not both.
others.
Connect to this unit from a BLUETOOTH device
The following discs take a longer time to start or vice versa.
playback.
A disc recorded with a complicated tree The name of the detected device does not
structure. appear.
A disc recorded in Multi Session. Depending on the status of the other device, it
A disc to which data can be added. may not be possible to obtain the name.
The sound skips. No ringtone.
Defective or dirty disc. Adjust the volume by rotating the control dial
while receiving a call.
USB playback Depending on the connecting device, the
ringtone may not be sent properly.
You cannot play back items via a USB hub. Set [RINGTONE] to [1] (page 18).
This unit cannot recognize USB devices via a USB The front speakers are not connected to the unit.
hub. Connect the front speakers to the unit. The
ringtone is output only from the front speakers.
23GB
The talkers voice cannot be heard. Some functions do not work.
The front speakers are not connected to the unit. Check if the connecting device supports the
Connect the front speakers to the unit. The functions in question.
talkers voice is output only from the front
speakers. A call is answered unintentionally.
The connecting phone is set to answer a call
A call partner says that the volume is too low or automatically.
high.
Adjust the volume accordingly using mic gain Pairing failed due to time out.
adjustment (page 13). Depending on the connecting device, the time
limit for pairing may be short.
Echo or noise occurs in phone call conversations. Try completing the pairing within the time.
Lower the volume.
Set EC/NC Mode to [EC/NC-1] or [EC/NC-2] BLUETOOTH function cannot operate.
(page 13). Turn off the unit by pressing OFF for more than 2
If the ambient noise other than the phone call seconds, then turn the unit on again.
sound is loud, try reducing this noise.
E.g.: If a window is open and road noise, etc., is No sound is output from the car speakers during
loud, shut the window. If an air conditioner is handsfree call.
loud, lower the air conditioner. If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
The phone is not connected. car speakers.
When BLUETOOTH audio is played, the phone is
not connected even if you press CALL. Application name is mismatched with the actual
Connect from the phone. application in App Remote.
Launch the application again from the App
The phone sound quality is poor. Remote application.
Phone sound quality depends on reception
conditions of cellular phone. While running the App Remote application via
Move your car to a place where you can BLUETOOTH, the display automatically switches
enhance the cellular phones signal if the to [BT AUDIO].
reception is poor. The App Remote application or BLUETOOTH
function has failed.
The volume of the connected audio device is low Run the application again.
(high).
Volume level will differ depending on the audio
device.
Error displays/Messages
Adjust the volume of the connected audio ERROR
device or this unit. The disc is dirty or inserted upside down.
Clean or insert the disc correctly.
The sound skips during playback of a A blank disc has been inserted.
BLUETOOTH audio device. The disc cannot play due to a problem.
Reduce the distance between the unit and the Insert another disc.
BLUETOOTH audio device. USB device was not automatically recognized.
If the BLUETOOTH audio device is stored in a case Connect it again.
which interrupts the signal, remove the audio Press to remove the disc.
device from the case during use.
Several BLUETOOTH devices or other devices HUB NO SUPRT (hubs not supported)
which emit radio waves are in use nearby. USB hub is not supported on this unit.
Turn off the other devices.
Increase the distance from the other devices. IPD STOP (iPod stop)
The playback sound stops momentarily when the When repeat play is not set, playback of the last
connection between this unit and the cellular track in album finished.
phone is being made. This is not a malfunction. The music application in the iPod/iPhone is
terminated.
The connected BLUETOOTH audio device cannot Press PAUSE to start playback again.
be controlled.
Check that the connected BLUETOOTH audio NO DEV (no device)
device supports AVRCP. [USB] is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
24GB
Be sure to connect a USB device and USB cable.
MEMORY BUSY
NO MUSIC This unit is storing data.
Wait until storing has finished.
The disc or USB device does not contain a music
file.
NO DEV (no device)
Insert a music CD.
BLUETOOTH audio source is selected without a
Connect a USB device with a music file in it.
BLUETOOTH audio device connected. A
OVERLOAD BLUETOOTH audio device has been disconnected
during a call.
USB device is overloaded.
Be sure to connect a BLUETOOTH audio device.
Disconnect the USB device, then change the
BLUETOOTH phone source is selected without a
source by pressing SRC.
cellular phone connected. A cellular phone has
The USB device has a fault, or an unsupported
been disconnected during a call.
device is connected.
Be sure to connect a cellular phone.
PUSH EJT (push eject)
P EMPTY (preset number empty)
The disc cannot be ejected.
Press (eject). The preset dial is empty.
UNKNOWN
READ
Name or phone number cannot be displayed
The unit is reading all track and album
when browsing phonebook or call history.
information on the disc.
Wait until reading is complete and playback
WITHHELD
starts automatically. Depending on the disc
Phone number is hidden by caller.
structure, it may take more than a minute.
25GB
AUTOESTEREO DIGITAL AM/FM CON Nota sobre la pila de litio
REPRODUCTOR DE DISCO COMPACTO No exponga la pila a fuentes de calor excesivo
como luz solar directa, fuego o similar.
POR FAVOR LEA DETALLADAMENTE ESTE
MANUAL DE INSTRUCCIONES ANTES DE
Advertencia: si el encendido del automvil
CONECTAR Y OPERAR ESTE EQUIPO. RECUERDE
QUE UN MAL USO DE SU APARATO PODRA no dispone de una posicin ACC
ANULAR LA GARANTA. Asegrese de ajustar la funcin AUTO OFF
(pgina 17). La unidad se apagar completa y
automticamente en el tiempo establecido
Este equipo opera a titulo secundario, despus de apagarla, lo cual evita que se agote
consecuentemente, debe aceptar interferencias la batera. Si no ajusta la funcin AUTO OFF,
perjudiciales incluyendo equipos de la misma clase mantenga presionado OFF hasta que se apague
y puede no causar interferencias a sistemas la pantalla cada vez que apague el motor.
operando a titulo primario.
AVISO IMPORTANTE PARA MXICO
La operacin de este equipo est sujeta a las
siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su
operacin no deseada.
Para consultar la informacin relacionada al
nmero del certificado, refirase a la etiqueta del
empaque y/o del producto.
2ES
Llamadas de emergencia
Notas sobre la funcin BLUETOOTH El dispositivo de manos libres BLUETOOTH para
automviles y el dispositivo electrnico conectados
Precaucin
al manos libres funcionan utilizando redes de
SONY NO SER RESPONSABLE DE NINGN DAO seales de radio, celulares y terrestres as como
INCIDENTAL, INDIRECTO O DERIVADO NI DE OTROS tambin la funcin programada por el usuario, que
DAOS QUE INCLUYEN, ENTRE OTROS, PRDIDA DE no puede garantizar la conexin en todas las
GANANCIAS, PRDIDA DE INGRESOS, PRDIDA DE condiciones.
DATOS, PRDIDA DE LA UTILIDAD DEL PRODUCTO O Por lo tanto, no dependa nicamente de un
DE CUALQUIER EQUIPO RELACIONADO, TIEMPO DE dispositivo electrnico para las comunicaciones
INACTIVIDAD Y TIEMPO DEL COMPRADOR esenciales (como las emergencias mdicas).
RELACIONADO CON LA UTILIZACIN DE ESTE Recuerde que, para realizar o recibir llamadas, el
PRODUCTO, SU HARDWARE Y SU SOFTWARE, O QUE dispositivo de manos libres y el dispositivo
RESULTE DE DICHA UTILIZACIN. electrnico conectado al manos libres deben operar
en una zona de servicio que tenga una intensidad
AVISO IMPORTANTE
de seal para celulares adecuada.
Utilizacin segura y eficaz Es posible que no se puedan realizar llamadas de
Los cambios o las modificaciones que se realicen en emergencia en todas las redes de telfonos
esta unidad sin la aprobacin de Sony pueden celulares o cuando se estn utilizando ciertos
anular la autorizacin del usuario para utilizar el servicios de la red y caractersticas del telfono.
equipo. Verifquelo con su proveedor de servicio local.
Revise las excepciones, debido a requisitos
nacionales o limitaciones, en cuanto a la utilizacin
de los equipos BLUETOOTH antes de utilizar el
producto.
Manejo
Consulte las leyes y las normas acerca de la
utilizacin de telfonos celulares y equipos de
manos libres en las reas en las que maneja.
Preste siempre atencin a la carretera y estacione el
automvil antes de realizar o contestar una llamada
si las condiciones lo requieren.
Exposicin a radiofrecuencia
Las seales de radiofrecuencia pueden afectar los
sistemas electrnicos que no hayan sido instalados
o protegidos correctamente en automviles, como
los sistemas electrnicos de inyeccin de
combustible, sistemas electrnicos de frenado
antideslizante (antibloqueo), sistemas electrnicos
de control de velocidad o sistemas de airbag. Para
la instalacin o el mantenimiento de este
dispositivo, consulte al fabricante de su automvil o
su representante. La instalacin o el
mantenimiento incorrectos podran ser peligrosos e
invalidar cualquier garanta aplicada a este
dispositivo.
Consulte con el fabricante de su automvil para
asegurarse de que el uso del telfono celular en el
automvil no afectar el sistema electrnico.
Controle regularmente que todos los equipos del
dispositivo inalmbrico de su automvil estn
instalados y funcionen correctamente.
3ES
Configuracin DISPLAY . . . . . . . . . . . . . . . . . . . . . 19
Tabla de contenidos COLOR (color predefinido, iluminador de
color dinmico) . . . . . . . . . . . . . . . . . . . . . . . . . 19
Gua para las partes y los controles. . . . . . . . . . . . . 5 CUSTOM-C (Color personalizado) . . . . . . . . . . 19
SND SYNC (Sincronizacin de sonidos) . . . . . 19
Procedimientos iniciales WHT MENU (Men Blanco) . . . . . . . . . . . . . . . 19
Extraccin del panel frontal . . . . . . . . . . . . . . . . . . . 7 START-WHT (Arranque Blanco) . . . . . . . . . . . . 19
Cambio del paso de sintonizacin de FM/AM . . . . 7 Configuracin BT (BLUETOOTH). . . . . . . . . . . . . . . 20
Ajuste del reloj. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BT INIT (Inicializacin de la tecnologa
Preparacin del dispositivo BLUETOOTH . . . . . . . . 7 BLUETOOTH) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Conexin de un dispositivo iPod/USB. . . . . . . . . . 10 Configuracin APP REM (App Remote). . . . . . . . . 20
Conexin de otro dispositivo de audio
porttil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Informacin complementaria
Precauciones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Escuchar la radio Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Escuchar la radio . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Usar el RDS (Sistema de datos de radio). . . . . . . . 11 Solucin de problemas . . . . . . . . . . . . . . . . . . . . . 25
Reproduccin
Reproduccin de un disco . . . . . . . . . . . . . . . . . . . 11
Reproduccin de un dispositivo iPod/USB . . . . . . 11
Reproduccin de un dispositivo BLUETOOTH. . . . 12
Bsqueda y reproduccin de pistas . . . . . . . . . . . 12
Funciones tiles
App Remote con iPhone/
telfono con Android . . . . . . . . . . . . . . . . . . . . 15
Ajustes
Cancelacin del modo DEMO . . . . . . . . . . . . . . . . 17
Operacin bsica de ajustes . . . . . . . . . . . . . . . . . 17
Configuracin GENERAL . . . . . . . . . . . . . . . . . . . . . 17
Configuracin SOUND. . . . . . . . . . . . . . . . . . . . . . . 17
EQ10 PRESET . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
EQ10 SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . 18
POSITION (posicin de escucha) . . . . . . . . . . . 18
RB ENH (Potenciador posterior de sonidos
graves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SW DIREC (Conexin directa al altavoz
potenciador de graves) . . . . . . . . . . . . . . . . . . 18
4ES
Gua para las partes y los controles
Unidad principal
5ES
Botones numricos (de 1 a 6) Retire la pelcula de aislamiento antes del uso.
Para recibir las emisoras almacenadas.
Mantngalo presionado para almacenarlas en
forma manual.
Llame a un nmero almacenado. Mantngalo
apretado para guardar un nmero telefnico.
ALBUM /
Para saltearse un lbum en el dispositivo de
audio. Mantngalo apretado para saltear
lbumes en forma continua. ()/ ()
(repetir) VOL (volumen) +/
(reproduccin aleatoria) SOUND
MIC (pgina 15) Abra el men SOUND directamente.
PAUSE -MENU
Mantngalo presionado para abrir el men de
PTY (Tipos de programa)
configuracin.
Para seleccionar los PTY en RDS.
(+)/ ()
Toma de entrada AUX
DSPL (pantalla)/-SCRL(desplazamiento)
Puerto USB
Para moverse entre los elementos de pantalla.
Mantngalo apretado para desplazarse a un
Control remoto RM-X231 elemento de pantalla.
6ES
Cambio del paso de
Procedimientos iniciales
sintonizacin de FM/AM
Extraccin del panel frontal Configure el intervalo de sintonizacin de FM/AM
de su pas. La configuracin aparece cuando se
Es posible extraer el panel frontal de la unidad para apaga la unidad.
evitar que la roben.
1 Presione MENU, gire el selector de
1 Mantenga presionado OFF . control para seleccionar [GENERAL] y, a
La unidad se apagar. continuacin, presinelo.
2 Presione el botn de liberacin del panel 2 Gire el selector de control para
frontal y, a continuacin, extraiga el seleccionar [TUNER-STP] y, a
panel tirando de l hacia usted. continuacin, presinelo.
3 Gire el selector de control para
seleccionar entre [50K/9K], [100K/10K] o
[200K/10K] y, a continuacin, presinelo.
7ES
Emparejamiento y conexin con otro
6 Seleccione esta unidad en el dispositivo
BLUETOOTH para establecer la conexin
dispositivo BLUETOOTH BLUETOOTH.
o se enciende cuando la conexin est
Cuando conecte un dispositivo BLUETOOTH
establecida.
(telfono celular, dispositivo de audio, etc.) por
primera vez es necesario el registro de ambos Nota
dispositivos (denominado emparejamiento). El Mientras se conecta a un dispositivo BLUETOOTH, esta
emparejamiento permite que la unidad y otros unidad no puede detectarse desde otro dispositivo.
dispositivos se reconozcan entre s. Para habilitar la deteccin, acceda al modo de
emparejamiento y busque esta unidad desde otro
dispositivo.
3 Realice el emparejamiento en el
dispositivo BLUETOOTH para detectar
esta unidad.
4 Seleccione [Sony Car Audio] que se 1 Presione CALL, gire el selector de control
muestra en la pantalla del dispositivo de para seleccionar [BT SIGNL] y, a
BLUETOOTH. continuacin, presinelo.
Si [Sony Car Audio] no aparece, repita desde el Asegrese de que se encienda.
paso 2.
2 Active la funcin BLUETOOTH en el
dispositivo BLUETOOTH.
3 Inicie el dispositivo BLUETOOTH para
conectarlo a esta unidad.
o se enciende.
Iconos en la pantalla:
5 Si se requiere una clave* en el dispositivo Se enciende cuando un telfono celular
BLUETOOTH, escriba [0000]. se conecta a la unidad.
* La clave de paso puede denominarse clave de
Se enciende cuando un dispositivo de
acceso, cdigo PIN, nmero PIN o
contrasea etc. en funcin del dispositivo. audio se conecta a la unidad.
8ES
Para conectar el dispositivo que se conect 2 Toque la parte marca N de la unidad con
por ltima vez en esta unidad la parte marca N del smartphone.
Active la funcin BLUETOOTH en el dispositivo
BLUETOOTH.
Presione SRC.
Seleccione [BT PHONE] o [BT AUDIO].
Presione ENTER para conectar con el telfono
celular, o PAUSE para conectar con el dispositivo de
audio.
Nota Asegrese que se encienda en la pantalla de
Mientras trasmite audio BLUETOOTH, no puede realizar
la unidad.
la conexin de esta unidad al telfono celular. Realice
en cambio la conexin desde el telfono celular a la
unidad. Para desconectar mediante One touch
Toque nuevamente la parte marca N de la unidad
Sugerencia
con la parte marca N del smartphone.
Con la seal BLUETOOTH activada: si el encendido se
ajusta en la posicin ON, la unidad vuelve a conectarse Notas
automticamente al ltimo telfono celular conectado. Al realizar la conexin, manipule el smartphone
cuidadosamente para evitar raspaduras.
Para instalar el micrfono La conexin One touch no es posible cuando la
Para obtener detalles sobre cmo conectar el unidad ya est conectada a otro dispositivo
micrfono, consulte el manual suministrado de compatible con tecnologa NFC. En este caso,
desconecte el dispositivo y haga conexin con el
Instalacin/Conexiones.
smartphone nuevo.
9ES
Conexin de un dispositivo
Escuchar la radio
iPod/USB
1 Baje el volumen de la unidad. Escuchar la radio
2 Conecte el dispositivo iPod/USB a la Se debe ajustar el paso de sintonizacin (pgina 7).
unidad. Para escuchar una estacin de radio, presione SRC
Para conectar un iPod/iPhone, utilice el cable de para seleccionar [TUNER].
conexin USB para iPod (no suministrado).
Al conectar un iPhone 5 Almacenamiento automtico (BTM)
1 Presione MODE para cambiar la banda
de radio (FM1, FM2, FM3, AM1 o AM2).
2 Presione MENU, gire el selector de
control para seleccionar [GENERAL] y, a
continuacin, presinelo.
3 Gire el selector de control para
seleccionar [BTM] y, a continuacin,
presinelo.
La unidad almacena las emisoras en el orden de
Conexin de otro dispositivo de frecuencia en los botones numricos.
audio porttil
1 Apague el dispositivo de audio porttil. Sintonizacin
2 Baje el volumen de la unidad. 1 Presione MODE para cambiar la banda
de radio (FM1, FM2, FM3, AM1 o AM2).
3 Conecte el dispositivo de audio porttil a
la toma de entrada AUX (minitoma 2 Realice la sintonizacin.
estreo) en la unidad con un cable de Para realizar la sintonizacin manual
conexin (no suministrado)*. Mantenga presionado SEEK +/ para ubicar la
frecuencia aproximada y, a continuacin,
* Asegrese de utilizar una clavija recta. presinelo repetidas veces para ajustar la
frecuencia deseada con mayor precisin.
Para realizar la sintonizacin automtica
Presione SEEK +/.
La bsqueda se detiene cuando la unidad
recibe una emisora. Repita este procedimiento
hasta recibir la emisora deseada.
Almacenamiento manual
4 Presione SRC para seleccionar [AUX].
1 Mientras recibe la emisora que desea
Coincidencia del nivel de volumen del almacenar, mantenga presionado un
dispositivo conectado con otras fuentes botn numrico (de 1 a 6) hasta que
Comience la reproduccin del dispositivo de audio aparezca [MEM].
porttil en un nivel moderado y configure su nivel
habitual de volumen en la unidad.
Presione MENU y gire el selector de control. Recepcin de las emisoras almacenadas
Seleccione [SOUND] [AUX VOL] (pgina 19).
1 Seleccione la banda y, a continuacin,
presione un botn numrico (de 1 a 6).
10ES
Usar el RDS (Sistema de datos
Reproduccin
de radio)
Reproduccin de un disco
Seleccin de tipos de programa (PTY)
1 Inserte el disco (con la etiqueta
Usar PTY para mostrar o buscar el tipo de programa orientada hacia arriba).
deseado.
1 Presione PTY durante la recepcin FM.
2 Gire el selector de control hasta que
aparezca el tipo de programa deseado y,
a continuacin, presinelo.
La unidad comienza a buscar una estacin que
emita el tipo de programa seleccionado.
Tipos de programas
La reproduccin se inicia automticamente.
NEWS (Noticias), AFFAIRS (Temas de actualidad),
INFO (Informacin), SPORT (Deportes), EDUCATE
(Educacin), DRAMA (Drama), CULTURE (Cultura),
SCIENCE (Ciencia), VARIED (Variados), POP M Reproduccin de un dispositivo
(Msica pop), ROCK M (Msica rock), EASY M
(msica de carretera), LIGHT M (Clsica ligera), iPod/USB
CLASSICS (Clsica en serio), OTHER M (Otro tipo de En este Manual de instrucciones, iPod se utiliza
msica), WEATHER (El tiempo), FINANCE como referencia general para las funciones del iPod
(Finanzas), CHILDREN (Programas infantiles), en un iPod y un iPhone, a menos que se
SOCIAL A (Temas de sociedad), RELIGION especifique lo contrario en el texto o en las
(Religin), PHONE IN (Entrada de telfono), TRAVEL ilustraciones.
(Viajes), LEISURE (Ocio), JAZZ (Msica jazz),
COUNTRY (Msica country), NATION M (Msica Para obtener ms informacin acerca de la
nacional), OLDIES (Msica de dcadas pasadas), compatibilidad de su iPod, consulte Acerca de
FOLK M (Msica folk), DOCUMENT (Documental) iPod (pgina 21) o visite el sitio web de soporte
tcnico que figura en la cubierta posterior.
11ES
1 Conecte el dispositivo iPod/USB al Notas
En funcin del dispositivo de audio, es posible que no
puerto USB (pgina 10). se muestre en esta unidad cierta informacin como,
Se inicia la reproduccin. por ejemplo, el ttulo, el nmero de pista y la duracin
Si ya est conectado un dispositivo, para iniciar y el estado de la reproduccin.
la reproduccin pulse SRC para seleccionar Incluso si se cambia la fuente en la unidad, la
[USB] ([IPD] aparece en la pantalla cuando se reproduccin de la seal del dispositivo de audio no
reconoce el iPod). se interrumpe.
[BT AUDIO] no aparece en la pantalla mientras se
2 Ajuste el volumen de esta unidad. ejecuta la aplicacin App Remote mediante la
funcin BLUETOOTH.
Para detener la reproduccin
Para hacer coincidir el nivel de volumen del
Mantenga presionado OFF por un segundo.
dispositivo BLUETOOTH con otras fuentes
Para extraer el dispositivo Comience la reproduccin del dispositivo de audio
Detenga la reproduccin y extraiga el dispositivo. porttil BLUETOOTH en un nivel moderado y
configure su nivel habitual de volumen en la
Precaucin para iPhone unidad.
Al conectar un iPhone mediante USB, el volumen Presione MENU y gire el selector de control.
de las llamadas telefnicas es controlado por el Seleccione [SOUND] [BTA VOL] (pgina 19).
iPhone, y no por la unidad. Trate de no subir el
volumen de la unidad durante una llamada sin
darse cuenta, ya que puede producirse un sonido
fuerte y repentino al terminar la llamada. Bsqueda y reproduccin de
pistas
Utilizacin directa del iPod (Control de
pasajero) Reproduccin repetida y aleatoria
Mantenga presionado MODE durante la
reproduccin para que aparezca [MODE IPOD] y
1 Durante la reproduccin, presione
habilitar la operacin directamente en el iPod.
(repetir), para seleccionar
Tenga en cuenta que solamente es posible ajustar reproduccin repetida, o
el volumen en la unidad. (reproduccin aleatoria) para
reproduccin aleatoria.
Para salir del modo de control de pasajero
Mantenga presionado MODE para que aparezca 2 Presione (repetir) o (repeticin
[MODE AUDIO]. aleatoria) varias veces para elegir el
modo deseado.
Es posible que la reproduccin en el modo de
reproduccin seleccionado se demore en iniciar.
Reproduccin de un dispositivo
BLUETOOTH Los modos de reproduccin disponibles varan en
funcin de la fuente de sonido seleccionada.
Puede reproducir contenido en un dispositivo
conectado que sea compatible con BLUETOOTH
A2DP (Perfil de distribucin de audio avanzado).
12ES
Bsqueda de una pista por nombre
(Quick-BrowZer) Realizacin de llamadas con manos
1 Durante la reproduccin de equipos de libres
audio de CD, USB o BT*1, presione
(navegar)*2 para mostrar la lista de Para usar un telfono celular, conctelo a esta
categoras de bsqueda. unidad. Para obtener ms informacin, consulte
Cuando aparece la lista de pistas, presione Preparacin del dispositivo BLUETOOTH
(volver) repetidamente hasta que aparezca (pgina 7).
la categora de bsqueda deseada.
*1 Disponible solo para equipos de audio
compatibles con AVRCP (Perfil de control remoto
de audio y video) 1.4 o posteriores.
*2 Durante la reproduccin USB, presione
(navegar) durante ms de 2 segundos para
volver directamente al inicio de la lista de
categoras. Rechazo de llamadas
2 Gire el selector de control para 1 Presione CALL cuando reciba una
seleccionar la categora de bsqueda llamada con un tono de llamada.
deseada y, a continuacin, presinelo Comienza la llamada telefnica.
para confirmarla.
Nota
3 Repetir el paso 2 para buscar la pista El tono de llamada y la voz del auricular solo salen de
los altavoces frontales.
deseada.
Se inicia la reproduccin. Para rechazar la llamada
Mantenga presionado OFF por un segundo.
Para salir del modo Quick-BrowZer
Presione (navegar). Para finalizar una llamada
Presione CALL nuevamente.
13ES
4 Gire el selector de control para
Marcacin predefinida de nmeros
seleccionar un nmero de la lista de
nmeros y, a continuacin, presinelo. telefnicos
Comienza la llamada telefnica.
Es posible almacenar hasta 6 contactos en la
marcacin preajustada.
Realizacin de llamadas desde el 1 Seleccione un nmero de telfono que
historial de llamadas desee almacenar en la marcacin
predefinida, de la agenda telefnica, el
1 Presione CALL, gire el selector de control historial de llamadas o bien ingresando
para seleccionar [RECENT CALL] y, a directamente el nmero.
continuacin, presinelo. El nmero de telfono aparecer en la pantalla
Aparece una lista del historial de llamadas. de esta unidad.
2 Gire el selector de control para 2 Mantenga presionado un botn de
seleccionar un nombre o un nmero nmero (de 1 a 6) hasta que aparezca
telefnico del historial de llamadas y, a [MEM].
continuacin, presinelo. El contacto se almacena en el nmero
Comienza la llamada telefnica. preajustado que seleccione.
14ES
Tareas disponibles durante la
Funciones tiles
llamada
Para configurar previamente el volumen del App Remote con iPhone/
tono de llamada y del auricular
Puede configurar el volumen del tono de llamada y
telfono con Android
del auricular. Se requiere la descarga de la
aplicacin App Remote desde
Ajuste del volumen del tono de llamada: la App Store para el iPhone o
Gire el selector de control mientras recibe la desde Google Play para
llamada. telfonos Android.
Mediante la aplicacin App
Ajuste del volumen del auricular: Remote, las siguientes
Gire el selector de control durante una llamada. caractersticas estn disponibles:
Operar la unidad para iniciar y controlar
Para ajustar el volumen para otra persona aplicaciones compatibles en iPhone/telfono
(Ajuste de ganancia de micrfono) con Android.
Presione MIC. Operar el iPhone/telfono con Android con
Niveles de volumen ajustables: [MIC-LOW], seales simples de dedos para controlar la
[MIC-MID], [MIC-HI]. fuente de la unidad.
Iniciar una aplicacin/fuente de audio o buscar
Para reducir el eco y el ruido (Cancelador de la palabra clave en la aplicacin al decir una
ecos/Modo cancelador de ruidos) palabra o frase en el micrfono (solo telfonos
Mantenga presionado MIC. Android).
Modo ajustable: [EC/NC-1], [EC/NC-2]. Leer mensajes de texto entrantes, SMS, correo
electrnico, Twitter, Facebook, calendario, etc., y
Para transferir una llamada se pueden responder los mensajes de texto, SMS
Para activar o desactivar el dispositivo correcto y correo electrnico automticamente (solo
(esta unidad o el telfono celular), presione MODE o telfonos Android).
use el telfono celular. Ajustar los parmetros del sonido (EQ10,
Nota Balance/Fader, posicin de escucha) de la
En funcin del telfono celular, es posible que la unidad a travs de telfonos iPhone/Android.
conexin de manos libres se interrumpa al intentar Notas
transferir una llamada. Por su seguridad, cumpla con las regulaciones y leyes
de trfico locales y no utilice la aplicacin mientras
Para revisar el estado de SMS y correo maneja.
electrnico* Las operaciones disponibles varan en funcin de la
parpadea cuando se recibe un nuevo mensaje aplicacin. Para obtener ms informacin sobre las
SMS o correo electrnico, y permanece iluminado aplicaciones disponibles, visite el sitio web de
servicio tcnico que se indica en la cubierta posterior.
cuando hay mensajes no ledos.
App Remote ver. 2.0 mediante USB es compatible con
* Solo disponible para telfonos celulares compatibles iPhones con iOS 5/iOS 6 instalados.
con MAP (Perfil de acceso a mensajes). App Remote ver. 2.0 mediante BLUETOOTH es
compatible con dispositivos con Android que tengan
Android 2.2, 2.3, 3.*, 4.0, 4.1 o 4.2 instalados.
Es posible que la funcin de reconocimiento de voz
no funcione dependiendo de su smartphone. En ese
caso, vaya a [Configuracin], seleccione
[Reconocimiento de voz].
La lectura de SMS/correo electrnico/notificaciones
est disponible para dispositivos Android con motor
TTS instalado.
La aplicacin Smart Connect, proporcionada por
Sony Mobile Communications, es necesaria para la
notificacin de lectura de Twitter/Facebook/
calendario, etc.
15ES
Establecer la conexin App Remote Activar el reconocimiento de voz (solo
para telfonos Android)
1 Conecte el iPhone al puerto USB o el Al registrar las aplicaciones, puede controlarlas
telfono Android con la funcin mediante el comando de voz. Para obtener ms
BLUETOOTH. detalles, consulte la ayuda de la aplicacin.
16ES
Configuracin GENERAL
Ajustes
CLOCK-ADJ (Ajuste del reloj) (pgina 7)
17ES
EQ10 SETTING AAV (volumen automtico avanzado)
Ajuste [CUSTOM] de EQ10. Ajuste el nivel de volumen de reproduccin de
BASE todas las fuentes de reproduccin al nivel
Selecciona una curva ecualizadora ptimo: [ON], [OFF].
preestablecida como base para futuros ajustes:
[BAND1] 32 Hz, [BAND2] 63 Hz, [BAND3] 125 Hz, RB ENH (Potenciador posterior de sonidos graves)
[BAND4] 250 Hz, [BAND5] 500 Hz, [BAND6] 1 kHz, El Potenciador de sonidos graves posteriores
[BAND7] 2 kHz, [BAND8] 4 kHz, [BAND9] 8 kHz, mejora los sonidos graves, ya que aplica el
[BAND10] 16 kHz. ajuste del filtro de paso bajo a los altavoces
El nivel de volumen puede ajustarse en posteriores. Esta funcin permite que los
intervalos de 1 dB entre -6 dB y +6 dB. altavoces posteriores funcionen como altavoces
potenciadores de graves si uno de ellos no est
POSITION (posicin de escucha) conectado. (Disponible solo cuando [SW DIRECT]
est configurado en [OFF]).
RBE MODE (modo Potenciador posterior de
sonidos graves)
Selecciona el potenciador posterior de sonidos
graves: [1], [2], [3], [OFF].
LPF FREQ (Frecuencia de filtro de bajo paso)
Selecciona la frecuencia de corte del altavoz
potenciador de graves: [50Hz], [60Hz], [80Hz],
SET F/R POS (configurar la posicin frontal/ [100Hz], [120Hz].
posterior) LPF SLOP (Pendiente de filtro de bajo paso)
Simula un campo de sonido natural mediante el Selecciona la pendiente LPF: [1], [2], [3].
retardo de la salida de sonido desde los
altavoces frontales/posteriores para adecuarse SW DIREC (Conexin directa al altavoz potenciador
a su posicin. de graves)
FRONT L (): izquierda delantera Puede utilizar el altavoz potenciador de graves
FRONT R (): derecha delantera sin un amplificador de potencia cuando est
FRONT (): delantera central conectado al cable del altavoz posterior.
ALL (): en el centro del automvil (Disponible solo cuando [RBE MODE] est
CUSTOM: Posicin configurada por App Remote configurado en [OFF]).
OFF: sin configuracin de posicin Asegrese de conectar un altavoz potenciador
ADJ POSITION* (ajustar posicin) de graves de 4 a 8 a cualquiera de los cables
Sintoniza con mayor precisin el ajuste de la del altavoz posterior. No conecte un altavoz al
posicin de escucha. otro cable de altavoz posterior.
Rango ajustable: [+3] [CENTER] [-3]. SW MODE (Modo del altavoz potenciador de
SET SW POS* (ajuste de la posicin subwoofer) graves)
NEAR (): cerca Selecciona el modo del altavoz potenciador de
NORMAL (): normal graves: [1], [2], [3], [OFF].
FAR (): lejos SW PHASE (Fase de altavoz potenciador de
graves)
BALANCE Selecciona la fase del altavoz potenciador de
Permite ajustar el balance de sonido: [RIGHT-15] graves: [NORM], [REV].
[CENTER] [LEFT-15]. SW POS* (Posicin del altavoz potenciador de
graves)
FADER Selecciona la posicin del altavoz potenciador
Permite ajustar el nivel relativo: [FRONT-15] de graves: [NEAR], [NORMAL], [FAR].
[CENTER] [REAR-15]. LPF FREQ (Frecuencia de filtro de bajo paso)
Selecciona la frecuencia de corte del altavoz
DSEE (motor potenciador de sonido digital) potenciador de graves: [50Hz], [60Hz], [80Hz],
Mejora el sonido comprimido digitalmente, ya [100Hz], [120Hz].
que restaura las altas frecuencias que se pierden LPF SLOP (Pendiente de filtro de bajo paso)
en el proceso de compresin. Selecciona la pendiente LPF: [1], [2], [3].
Este ajuste se puede memorizar para cada
fuente diferente al sintonizador.
Selecciona el modo DSEE: [ON], [OFF].
LOUDNESS
Refuerza los graves y agudos para obtener un
sonido claro a niveles de volumen bajos: [ON],
[OFF].
18ES
S.WOOFER (altavoz potenciador de graves) DIMMER
SW LEVEL (Nivel del altavoz potenciador de Cambia el brillo de la pantalla.
graves) AT (automtico)
Permite ajustar el nivel de volumen del altavoz Se atena la pantalla automticamente al
potenciador de graves: [+10 dB] [0 dB] encender la luz. (Disponible solamente si el
[-10 dB]. cable de control de iluminacin est conectado.)
([ATT] aparece en pantalla con el ajuste ms ON
bajo). Se atena la pantalla.
SW PHASE (Fase de altavoz potenciador de OFF
graves) Desactiva el atenuador.
Selecciona la fase del altavoz potenciador de
graves: [NORM], [REV]. COLOR (color predefinido, iluminador de color
SW POS* (Posicin del altavoz potenciador de dinmico)
graves) Permite seleccionar un color predefinido para la
Selecciona la posicin del altavoz potenciador pantalla y los botones de la Unidad principal.
de graves: [NEAR], [NORMAL], [FAR]. Permite seleccionar entre 12 colores
LPF FREQ (Frecuencia de filtro de bajo paso) predefinidos, un color personalizado y 5 diseos
Selecciona la frecuencia de corte del altavoz predefinidos.
potenciador de graves: [50Hz], [60Hz], [80Hz],
[100Hz], [120Hz]. CUSTOM-C (Color personalizado)
LPF SLOP (Pendiente de filtro de bajo paso) Permite registrar un color personalizado para la
Selecciona la pendiente LPF: [1], [2], [3]. pantalla y los botones.
BASE
HPF (Filtro de paso alto) Permite seleccionar un color predefinido como
HPF FREQ (Frecuencia de filtro de paso alto) base para el posterior personalizado: [RGB RED],
Permite seleccionar la frecuencia de corte: [OFF], [RGB GRN], [RGB BLUE].
[50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. Gama de colores ajustables: [0] - [32] ([0] no se
HPF SLOP (Pista del filtro de paso alto) puede utilizar para todas las gamas de colores).
Selecciona la pendiente HPF (efectivo solamente DAYNIGHT
cuando [HPF FREQ] se ajusta en un valor Permite definir un color diferente para DAY/
diferente a [OFF]): [1], [2], [3]. NIGHT segn el ajuste del atenuador.
[DAY]: [DIMMER] ajustado en [OFF] o [AUTO]
AUX VOL (Nivel de volumen AUX) (apaga la luz principal).
Permite ajustar el nivel de volumen de cada [NIGHT]: [DIMMER] ajustado en [ON] o [AUTO]
dispositivo auxiliar conectado: [+18 dB] [0 dB] (enciende la luz principal).
[-8 dB].
Este ajuste elimina la necesidad de ajustar el SND SYNC (Sincronizacin de sonidos)
nivel de volumen entre fuentes. Selecciona el color con la sincronizacin de
sonido: [ON], [OFF].
BTA VOL (nivel de volumen de audio BLUETOOTH)
Ajusta el nivel de volumen de cada equipo WHT MENU (Men Blanco)
BLUETOOTH conectado: [+6 dB] [0 dB] [-6 dB]. Es posible visualizar el men de manera ms
Este ajuste elimina la necesidad de ajustar el clara (en blanco) sin preocuparse del ajuste del
nivel de volumen entre fuentes. color: [ON], [OFF].
19ES
Configuracin BT (BLUETOOTH)
Informacin complementaria
PAIRING (pgina 8)
20ES
Notas sobre los discos CD-R/CD-RW
Nmero mximo de: (solamente CD-R/CD-RW)
Acerca de iPod
carpetas (lbumes): 150 (incluida la carpeta Puede conectarse a los siguientes modelos de
raz) iPod. Actualice sus dispositivos iPod a la ltima
archivos (pistas) y carpetas: 300 (si los nombres versin de software antes de utilizarlos.
de carpeta o archivo contienen muchos
caracteres, este nmero puede ser inferior a Modelos compatibles de iPhone/iPod
300)
caracteres que se pueden visualizar en el Modelo compatible USB
nombre de una carpeta o archivo: 32 (Joliet)/ iPhone 5
64 (Romeo)
iPhone 4S
Si un disco multisesin empieza con una sesin
CD-DA, se reconoce como un disco CD-DA y las iPhone 4
otras sesiones no se reproducen. iPhone 3GS
Discos que NO se pueden reproducir en esta
unidad iPhone 3G
CD-R/CD-RW de calidad de grabacin iPod touch (5 generacin)
deficiente.
CD-R/CD-RW grabados con un dispositivo de iPod touch (4 generacin)
grabacin no compatible. iPod touch (3 generacin)
CD-R/CD-RW no finalizados correctamente.
iPod touch (2 generacin)
CD-R/CD-RW que no se hayan grabado en
formato CD de msica o en formato MP3 que iPod classic
cumpla la norma ISO9660 Nivel 1/Nivel 2, Joliet/ iPod nano (7 generacin)
Romeo o multisesin.
iPod nano (6 generacin)
iPod nano (5 generacin)
Orden de reproduccin de los archivos
iPod nano (4 generacin)
MP3/WMA
iPod nano (3 generacin)
MP3/WMA Carpeta (lbum) Made for iPod y Made for iPhone indican que
un accesorio electrnico se dise para
Archivo MP3/WMA
(pista)
conectarse especficamente a los dispositivos
iPod o iPhone respectivamente, y que el
fabricante obtuvo la certificacin necesaria para
que cumpla con los estndares de rendimiento de
Apple. Apple no se hace responsable del
funcionamiento de este dispositivo en
cumplimiento de los estndares de seguridad y
normativa. Tenga en cuenta que el uso de este
accesorio con el iPod o el iPhone puede afectar al
rendimiento inalmbrico.
21ES
Las microondas que emite un dispositivo
Acerca de la funcin BLUETOOTH BLUETOOTH pueden afectar el funcionamiento de
dispositivos mdicos electrnicos. Apague esta
Qu es la tecnologa BLUETOOTH? unidad y los dems dispositivos BLUETOOTH en
La tecnologa inalmbrica BLUETOOTH es una los lugares siguientes ya que podran provocar un
tecnologa de corto alcance que permite la accidente.
comunicacin inalmbrica de datos entre Lugares con presencia de gas inflamable,
dispositivos digitales, como un telfono celular y hospitales, trenes, aviones o gasolineras
un auricular. La tecnologa inalmbrica Lugares cerca de puertas automticas o
BLUETOOTH tiene una cobertura de alarmas de incendios
aproximadamente 10 m. Lo habitual es conectar Esta unidad admite recursos de seguridad que
dos dispositivos, aunque algunos dispositivos cumplen con el estndar BLUETOOTH para
pueden conectarse a varios dispositivos al mismo proporcionar una conexin segura al utilizar la
tiempo. tecnologa inalmbrica BLUETOOTH, pero es
No es necesario utilizar un cable para realizar la posible que la seguridad sea insuficiente segn el
conexin ya que la tecnologa BLUETOOTH es ajuste. Tenga cuidado al realizar una
inalmbrica. Tampoco es necesario que los comunicacin con la tecnologa inalmbrica
dispositivos estn orientados entre s, como BLUETOOTH.
sucede con la tecnologa infrarroja. Por ejemplo, No se aceptan responsabilidades por la prdida
puede utilizar este tipo de dispositivos dentro de de informacin que pudiera producirse durante
una bolsa o un bolsillo. una comunicacin BLUETOOTH.
La tecnologa BLUETOOTH es un estndar No se garantiza la comunicacin con todos los
internacional admitido por millones de empresas dispositivos BLUETOOTH.
en todo el mundo y que utilizan varias compaas Un dispositivo que disponga de la funcin
a escala internacional. BLUETOOTH debe cumplir el estndar
BLUETOOTH SIG y estar autenticado.
Acerca de la comunicacin BLUETOOTH Incluso en el caso de que el dispositivo
La tecnologa inalmbrica BLUETOOTH tiene una conectado cumpla el estndar BLUETOOTH
cobertura de aproximadamente 10 m. mencionado anteriormente, es posible que
El rango mximo de comunicacin puede variar algunos dispositivos no puedan conectarse o
de acuerdo con los obstculos (personas, funcionar correctamente, segn las
metales, paredes, etc.) o el entorno caractersticas o las especificaciones del
electromagntico. dispositivo.
Las siguientes condiciones pueden afectar la Mientras est hablando con el manos libres del
sensibilidad de la comunicacin BLUETOOTH. telfono, puede producirse ruido, segn el
La existencia de obstculos como, una persona, dispositivo o el entorno de comunicacin.
un objeto metlico o una pared, entre esta En funcin del dispositivo que vaya a conectarse,
unidad y el dispositivo BLUETOOTH. es posible que transcurra cierto tiempo antes de
El uso de dispositivos que utilicen una que se inicie la comunicacin.
frecuencia de 2,4 GHz, como un dispositivo LAN
inalmbrico, un telfono inalmbrico o un Otros
microondas cerca de la unidad. Es posible que el dispositivo BLUETOOTH no
Como los dispositivos BLUETOOTH y las redes LAN funcione en telfonos celulares segn las
inalmbricas (IEEE802.11b/g) utilizan la misma condiciones de las ondas de radio y la ubicacin
frecuencia, pueden producirse interferencias de en la que se utilice el equipo.
microondas que provoquen el deterioro de la Si no se siente cmodo despus de utilizar el
velocidad de comunicacin, la aparicin de ruido dispositivo BLUETOOTH, deje de utilizarlo
o una conexin no vlida si la unidad se utiliza inmediatamente. Si el problema persiste,
cerca de un dispositivo LAN inalmbrico. En este consulte con el distribuidor Sony ms cercano.
caso, realice el procedimiento siguiente.
Utilice esta unidad a una distancia mnima de Si desea realizar alguna consulta o solucionar algn
10 m del dispositivo LAN inalmbrico. problema relativo a la unidad que no se trate en
Si utiliza esta unidad a menos de 10 m de un este manual, pngase en contacto con el
dispositivo LAN inalmbrico, apague el distribuidor Sony ms cercano.
dispositivo LAN inalmbrico.
Instale esta unidad y el dispositivo BLUETOOTH
a la distancia ms corta posible entre s.
22ES
Mantenimiento Especificaciones
Sustitucin de la pila de litio del control Seccin del sintonizador
remoto
FM
El alcance del control remoto disminuye a medida
Rango de sintonizacin:
que se agota la pila. Sustityala por una pila de litio
87,5 108,0 MHz (a intervalos de 50 kHz)
CR2025 nueva. El uso de cualquier otra pila podra
87,5 108,0 MHz (a intervalos de 100 kHz)
provocar un incendio o una explosin.
87,5 107,9 MHz (a intervalos de 200 kHz)
Lado + hacia arriba Paso de sintonizacin de FM:
50 kHz/100 kHz/200 kHz conmutables
Terminal de antena:
Conector de antena externa
Frecuencia intermedia: 25 kHz
Sensibilidad til: 8 dBf
Selectividad: de 75 dB a 400 kHz
Relacin seal-ruido: 80 dB (estreo)
Notas sobre la pila de litio Separacin: de 50 dB a 1 kHz
Mantenga la pila de litio fuera del alcance de los Respuesta de frecuencia: 20 15 000 Hz
nios. Si se ingiriese, pngase en contacto
AM
inmediatamente con un mdico.
Limpie la pila con un pao seco para garantizar un Rango de sintonizacin:
contacto ptimo. 531 1 602 kHz (a intervalos de 9 kHz)
Asegrese de respetar la polaridad al instalarla. 530 1 710 kHz (a intervalos de 10 kHz)
No sujete la pila con pinzas metlicas, ya que podra Paso de sintonizacin de AM:
producirse un cortocircuito. 9 kHz/10 kHz conmutable
Terminal de antena:
ADVERTENCIA
Conector de antena externa
La pila puede explotar si no se emplea
Frecuencia intermedia:
adecuadamente.
9 124,5 kHz o 9 115,5 kHz/4,5 kHz (a intervalos de
No recargue la pila; tampoco la desmonte ni la
9 kHz)
arroje al fuego.
9 115 kHz o 9 125 kHz/5 kHz (a intervalos de
10 kHz)
Limpieza de los conectores Sensibilidad: 26 V
Es posible que la unidad no funcione
correctamente si los conectores entre sta y el Seccin del reproductor de CD
panel frontal estn sucios. Para evitar esta Relacin seal-ruido: 120 dB
situacin, extraiga el panel frontal (pgina 7) y Respuesta de frecuencia: 10 20 000 Hz
limpie los conectores con un hisopo de algodn. Fluctuacin y trmolo: inferior al lmite medible
Realice esta operacin con suavidad. De lo
Cdec correspondiente: MP3 (.mp3) y WMA (.wma)
contrario, los conectores podran resultar daados.
Seccin del reproductor USB
Interfaz: USB (alta velocidad)
Corriente mxima: 1 A
Cantidad mxima de pistas reconocibles: 10 000
Cdices correspondientes:
MP3 (.mp3), WMA (.wma) y WAV (.wav)
23ES
Perfiles compatibles con la tecnologa
BLUETOOTH*2: Derechos de autor
A2DP (Perfil de distribucin de audio avanzado)
1.3 La marca de la palabra y logotipos Bluetooth son
AVRCP (Perfil de control remoto de audio y marcas comerciales registradas y son propiedad de
video) 1.5 Bluetooth SIG, Inc., y Sony Corporation posee
HFP (Perfil manos libres) 1.6 licencia para utilizar cualquiera de dichas marcas.
PBAP (Perfil de acceso a la agenda telefnica) Otras marcas registradas y nombres comerciales
SPP (Perfil de puerto serie) pertenecen a sus respectivos propietarios.
MAP (Perfil de acceso a mensajes)
La marca N es una marca comercial o marca
HID (Perfil de dispositivo de interfaz humana)
registrada de NFC Forum, Inc. en los Estados Unidos
*1 El alcance real variar segn factores, como los y en otro pases.
obstculos entre los dispositivos, los campos
magnticos alrededor de un horno de microondas, Windows Media es una marca comercial registrada
la electricidad esttica, la sensibilidad de recepcin, o una marca comercial de Microsoft Corporation en
el funcionamiento de la antena, el sistema los EE. UU. y otros pases.
operativo, la aplicacin del software, etc.
*2 Los perfiles estndar BLUETOOTH indican el Este producto est protegido por los derechos de
propsito de la comunicacin BLUETOOTH entre propiedad intelectual de Microsoft Corporation.
dispositivos. Queda prohibido el uso o la distribucin de esta
tecnologa fuera de este producto si no se dispone
Seccin del amplificador de potencia de una licencia de Microsoft o una divisin
Salida: salidas de altavoz autorizada de Microsoft.
Impedancia de altavoz: 4 8
Salida de potencia mxima: 55 W 4 (a 4 ) iPhone, iPod, iPod classic, iPod nano, y iPod touch
son marcas comerciales de Apple Inc., registradas
Generales en los Estados Unidos y otros pases. App Store es
Salidas: una marca de servicio de Apple Inc.
Terminal de salidas de audio (frontal, posterior,
sub) Tecnologa de codificacin de audio MPEG Layer-3 y
Antena de alimentacin/Terminal de control del patentes bajo licencia de Fraunhofer IIS y Thomson.
amplificador de potencia (REM OUT)
Google, Google Play y Android son marcas
Entradas:
comerciales de Google Inc.
Terminal de entrada del control remoto
Terminal de entrada de la antena
Terminal de entrada MIC
Toma de entrada AUX (minitoma estreo)
Puerto USB
Requisitos de alimentacin: batera de automvil
de cc 12 V (masa negativa [tierra])
Dimensiones:
Aprox.: 178 mm 50 mm 177 mm (an./al./prf.)
Dimensiones de montaje:
Aprox.: 182 mm 53 mm 160 mm (an./al./prf.)
Peso: aprox. 1,2 kg
Contenidos del paquete:
Unidad principal (1)
Control remoto (1): RM-X231
Micrfono (1)
Componentes de instalacin y conexiones
(1 juego)
24ES
La pantalla se apaga mientras la unidad se
Solucin de problemas encuentra en funcionamiento.
La siguiente lista de comprobacin le ayudar a La funcin de Desactivacin de la pantalla est
solucionar los problemas que puedan producirse encendida (pgina 19).
con la unidad.
Antes de consultarla, revise los procedimientos de Los botones de operacin no funcionan.
conexin y de funcionamiento. El disco no se expulsa.
Para obtener ms detalles acerca de cmo utilizar el Presionar PTY y (volver)/MODE por ms de
fusible y cmo retirar la unidad del tablero, consulte 2 segundos para realizar la restauracin de la
el manual de instalacin y de conexiones unidad.
suministrado con esta unidad. Los contenidos almacenados en la memoria son
Si el problema no se resuelve, visite el sitio web de eliminados.
soporte tcnico que figura en la cubierta posterior. Por su seguridad, no realice la restauracin de la
unidad mientras maneja.
Generales
Recepcin de radio
La unidad no recibe alimentacin.
Si la unidad est apagada y la pantalla No es posible recibir emisoras.
desaparece, no se puede operar con el control Hay ruidos que obstaculizan el sonido.
remoto. La conexin no es correcta.
Encienda la unidad. Si su automvil cuenta con una antena de radio
incluida en el vidrio lateral o posterior, conecte
No se emite el sonido. un cable REM OUT (con rayas azules y blancas)
La posicin del control de equilibrio [FADER] no o un cable de fuente de alimentacin accesorio
est ajustada para un sistema de 2 altavoces. (rojo) al cable de fuente de alimentacin del
amplificador de seal de la antena del
No se escuchan pitidos. automvil.
Se encuentra conectado un amplificador de Compruebe la conexin de la antena del
potencia opcional y no est usando el automvil.
amplificador integrado. Si la antena del automvil no se extiende,
compruebe la conexin del cable de control de
El contenido de la memoria se borr. la antena motorizada.
Se desconect la batera o el cable de fuente de Se ha borrado el ajuste del paso de sintonizacin.
alimentacin, o no estn conectados Vuelva a ajustar el intervalo de sintonizacin
correctamente. (pgina 7).
25ES
Una vez realizado el emparejamiento del
Los archivos MP3/WMA tardan ms tiempo en
dispositivo, active la salida de seal de
reproducirse que los dems.
BLUETOOTH (pgina 8).
El inicio de la reproduccin de los siguientes
discos tarda algo ms de tiempo. No es posible realizar la conexin.
Disco grabado con una estructura de rbol
La conexin se controla de un solo lado (esta
complicada.
unidad o dispositivo BLUETOOTH) pero no de
Disco grabado en Multi Session.
ambos lados.
Disco al que es posible aadir datos.
Conecte esta unidad a un dispositivo
BLUETOOTH o viceversa.
Se producen saltos de sonido.
Disco defectuoso o sucio. No aparece el nombre del dispositivo detectado.
Segn el estado del otro dispositivo, es posible
Reproduccin USB que no se pueda obtener el nombre.
La conexin One touch (NFC) no es posible. El interlocutor de una llamada le notifica que el
Si el smartphone no responde al tacto. volumen es demasiado bajo o demasiado alto.
Revise que la funcin NFC del smartphone est Ajuste el volumen segn corresponda mediante
encendida. la ganancia de micrfono (pgina 15).
Mueva la parte marca N del smartphone de
modo de acercarla a la parte marca N de esta Se producen ecos o ruidos durante las
unidad. conversaciones telefnicas.
Si el smartphone se encuentra dentro de un Baje el volumen.
estuche, qutelo. Ajuste el modo EC/NC en [EC/NC-1] o [EC/NC-2]
La sensibilidad de recepcin NFC depende del (pgina 15).
dispositivo. Si el sonido ambiente que no sea el sonido de la
Si la conexin One touch con el smartphone falla llamada de telfono es alto, intente reducir el
varias veces, haga la conexin a BLUETOOTH en ruido.
forma manual. Por ej.: si una ventana est abierta y se oye ruido
de la calle, etc., fuerte, cierre la ventana. Si el aire
acondicionado est alto, bjelo.
Funcin BLUETOOTH
El dispositivo de conexin no puede detectar El telfono no est conectado.
esta unidad. Durante la reproduccin de audio BLUETOOTH, el
Antes de realizar el emparejamiento, configure telfono no est conectado aunque presione
esta unidad en el modo de espera del CALL.
emparejamiento. Realice la conexin desde el telfono.
Mientras se conecta al otro dispositivo
BLUETOOTH, esta unidad no puede detectarse
desde otro dispositivo.
Desconecte la conexin actual y busque esta
unidad desde otro dispositivo.
26ES
La calidad de sonido del telfono es baja. Durante la llamada con manos libres, los
La calidad del sonido del telfono depende de las altavoces del automvil no emiten ningn
condiciones de recepcin del telfono celular. sonido.
Mueva el automvil a un lugar en el que pueda Si el sonido de salida viene del telfono celular,
mejorar la seal del telfono celular si la ajuste el telfono para que el sonido se emita por
recepcin es de mala calidad. los altavoces del automvil.
27ES
OVERLOAD NO DEV (No hay dispositivo)
El dispositivo USB est sobrecargado. La fuente de audio BLUETOOTH se selecciona sin
Desconecte el dispositivo USB y, a que est conectado un dispositivo BLUETOOTH.
continuacin, presione SRC para cambiar la El dispositivo de audio BLUETOOTH se ha
fuente. desconectado durante una llamada.
El dispositivo USB tiene una falla, o se ha Asegrese de conectar un dispositivo de audio
conectado un dispositivo incompatible. BLUETOOTH.
La fuente del telfono BLUETOOTH se selecciona
PUSH EJT (Presione expulsar) sin un telfono celular conectado. El telfono
No es posible expulsar el disco. celular se ha desconectado durante una llamada.
Presione (expulsar). Asegrese de conectar un telfono celular.
28ES
Si estas soluciones no ayudan a solucionar el
problema, pngase en contacto con el distribuidor
Sony ms cercano.
Si entrega la unidad para su reparacin a causa de
problemas en la reproduccin de CD, lleve el disco
que se utiliz cuando se produjo el problema.
29ES
http://esupport.sony.com/ES/LA/
http://www.sony.net/
2014 Sony Corporation Printed in Thailand