Sei sulla pagina 1di 18

MANUAL HYDROPRO NAVIGATION

Open HyroPro Navigation.

Click Project and choose New for a new project or click Open to continue the present
project.

Enter the project name and Save the file in new folder, and then click Next.
Fill in the blanks with the data required and click Finish.

To use the data from the past project, click Inherit.

For Inherit, chose the data that you want inherit from the file. For example, you want to
process the Coordinate system, than you just click on the box for Coordinate System.
After done key-in all the required information for the project, click Finish.

TO SET THE COORDINATES UNIT

Click on Configure in menu bar and choose Displays Units.

Insert all the required values in Display Units and click OK if you have done.
TO SET THE GLOBAL SETTING

Click at Configure, and choose Global Setting. On Global Setting window, choose
Time and time is depend on the time of the hydrographic work going to do.

After that, choose Coordinates. Click on the Local grid (NEE) and East, North.

Click on Constant and click OK if all done.


TO SET THE COORDINATE SYSTEM

Click at Configure in menu bar and choose Coordinate System.

After window of Coordinate System come out, click on Select to choose the coordinate
system.
If we continue the previous project, just click on Recently Used System.

If we do the new project, click on New System then, click Next.

Click Coordinate System And Zone then, click Next.


Choose the coordinate system based on the place you are doing the hydrographic work.
For example, in our project where were doing at Pantai Merdeka, for the Coordinate
System we should choose Malaysian Cassini State Plane and Zone 01 Kedah and
Perlis.

Click at No geoid model then, click Finish.

After Coordinate System was set, data will appear like this.
TO SET OBJECT (BOAT)

Click Configure at menu bar and choose Vessels.

Click Add. Name the object and number the object then, click OK.

After that it will appear like this and click Editor.


Click Add Line and draw the boat according to the actual dimension of the boat.

Click Vessel Ofset to set the instruments used in the boat such as GPS Receiver and
the Echo Sounder and click Properties.

Then, choose either you want to visible your boat name or not and choose your own
Design units.

TO SET THE SOUNDER LINE


To set the sounder line, click the Guidance Object at Configure in menu bar.

The New Group window will appear and name it. Then, click OK.

Insert the GO type, GO name and Sequence in group for your New Guidance Object.
Put the value of coordinates for coordinates x and y then, click Next.

This one is used to determine how long the line and where the direction of the line is are.
Range is long for line and the bearing is the direction of the line. After finish everything,
click Finish.
Click Yes to create more GOs.

Click on Cross-line to choose the type of lines. Then, click OK.

When Generate Parallel GOs Window come out, insert the number of lines you want
either at right or left of Master line and put also the interval of line. Such as in our work,
the intervals of each line are 20m.
TO SET THE EQUIPMENT USED

After set the sounding lines, you have to set the equipment that you used. Click
Equipment in Configure at the menu bar.

Click Add to insert the instrument which you will use in the work.

Then, choose the instrument from the list given.


Choose Services that you want and after that, click Finish.

Set you Offset, follow with the equipment that you used it.

Click Add to select Echo Souder equipment.


Select Echo Souder and click Next.

Choose Echo Sounder for Services then, click Finish.

Set Offset Echo for Echo Sounder.


TO IDENTIFY THE ICONS IN HYDROpro

Equipment Monitor
Vessel Monitor
Guidance Monitor
Survey Text
Map
Offline Bar
Echo Sounder Trace
Profile Display

This will appear when you click at the Map icon. It will show all the sounding lines that
you had set up according to its true location.
This window will appear when you click on Survey Text icon. After that, set as Default.

Then click OK.

After that, Survey Text Frame will appear automatically.


Then, click Echo Sounder Trace icon and this window will appear. This actually an Echo
Trace where it will show the depth of point of sounding along the sounding line.

This window will appear when you click on Offline Bar icon.

This bar is actually guiding the boat to be on line. It shows either the boat is moving to
the right or to the left of the sounding line.

THE ICON USING DURING SOUNDING WORK

Start Survey
Online
Log on

Potrebbero piacerti anche