Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MSR:multi-standard-radio
eNodeB LTE V100R007 Delta for Hardware
The principles for BBU slot assignment in an LTE TDD base station are the same as
those in an LTE FDD base station.
NOTE: In a G*U*L*T base station, a single BBU is configured with one UMPT to work
in quadruple modes.
The UBBP provides six indicators indicating the status of SFP links and one indicator
indicating the status of QSFP link.
Silkscreen Color Status Description
CPRIx Red or Steady green The CPRI link is functioning properly.
green
Steady red An optical module fails to transmit or
receive signals due to one of the
following causes:
The optical module is faulty.
The fiber optic cable is broken.
Blinking red (on for 0.125s The RF module connected to the CPRI
and off for 0.125s) link has a hardware fault.
Blinking red (on for 1s and The CPRI link is out of lock due to one of
off for 1s) the following causes:
There is no mutual lock between
dual-mode reference clocks.
The CPRI port rates do not match
each other.
Steady off The optical module cannot be
detected.
The CPRI electrical cable is not
connected.
Indicators ( silkscreen HEI) for the QSFP port on the UBBP panel is reserved .
CPRI ports with different rates on the UBBP working in UMTS mode support different
numbers of cells, CPRI ports with different rates on the UBBP working in LTE FDD
mode support different numbers of cells, CPRI ports with different rates on the UBBP
working in LTE TDD mode support different numbers of cells, for details refer to
product document.
NOTE:
The USU3900 provides functions different from a BBU. Do not interchange them.
The USU3900 supports digital signature of software, and files in USB flash drives
support encryption and integrity protection. Therefore, data security can be ensured
for data downloading through the USB ports.
The local maintenance port on the USU3900 can be disabled to prevent unauthorized
login to the USU3900 using this port for attack.
Capacity specifications:
RAT Specifications
LTE TDD and LTE A maximum of two levels of USUs can be connected. The second-level
TDD USU can be connected to a maximum of five first-level USUs. Each first-
level USU can be connected to a maximum of five BBUs.
UMTS Only one USU is configured. The USU supports interconnection of five
BBUs at most.
Indicator
Silkscreen Color Status Description
CI Red or Steady green The interconnection link is normal.
green Steady red An optical module fails to transmit or receive signals due to one of the
following causes:
The optical module is faulty.
Port on UCIU
Indicator on UCIU
Port on UCXU
Port Connector Description
M0, M1, M2, or QSFP connector It is a primary interconnection port used for
M3 connecting a secondary interconnection port.
M4/S1 or M5/S0 QSFP connector It is a primary or secondary interconnection port. If it
functions as a primary interconnection port, it is
connected to a secondary interconnection port. If it
functions a secondary interconnection port, it is
connected to a primary interconnection port.
Indicator on UCIU