Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
This publication has been provided pursuant to an agreement containing restrictions on its use. The publication is also protected by
Federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system,
or translated into any human or computer language, in any form or by any means, electronic, magnetic, manual, or otherwise, or
disclosed to third parties without the express written permission of:
Trademark Notice
3DFS, 3D Drill View, 3D Drill View KM, 3DView, 3D Surveillance, Active Field Surveillance, Active Reservoir Surveillance,
ADC, Advanced Data Transfer, ARIES, Asset Development Center, AssetJournal, Asset Performance, AssetView, Atomic
Meshing, Automate, BLITZ, BLITZPAK, CasingSeat, COMPASS, Contouring Assistant, Corporate Data Archiver, Corporate
Data Store, DataManager, DataStar, DBPlot, DecisionSuite, Decisionarium, DecisionSpace, DecisionSpace AssetPlanner,
DecisionSpace AssetView, DecisionSpace Atomic Meshing, DecisionSpace Decision Management Systems(DMS),
DecisionSpace Nexus, DecisionSpace PowerGrid, DecisionSpace PowerModel, DecisionSpace PrecisionTarget, DecisionSpace
Reservoir, DecisionSpace TracPlanner, DecisionSpace Well Seismic Fusion, DepthTeam, DepthTeam Explorer, DepthTeam
Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS,
Discovery, Discovery Asset, Drill-to-the-Earth Model, Drillability Suite, Drilling Desktop, DrillModel, DrillVision, DSS,
Dynamic Reservoir Management, Dynamic Surveillance System, EarthCube, EDM, eLandmark, Engineers Data Model,
Engineer's Desktop, Engineers Link, Executive Assistant, ezFault, ezSurface, ezTracker, FG+, FastTrack, FieldWorks, FZAP!,
GeoDataLoad, GeoGraphix (stylized), GeoGraphix Exploration System, GeoLink, GeoProbe, GeoProbe GF DataServer, GES,
GESXplorer, GMAplus, GRIDGENR, Handheld Field Operator, I2 Enterprise, iDIMS, IsoMap, iWellFile, Landmark, Landmark
& Design, Landmark Logo & Design, Landmark Decision Center, Landscape, Lattix, LeaseMap, LMK Resources, LogEdit,
LogM, LogPrep, Magic Earth, MagicDesk, Make Great Decisions, MathPack, MIMIC, MIMIC+, MIRA, Model Builder,
MyLandmark, Nexus, Object MP, OpenBooks, Open Explorer, OpenJournal, OpenSGM, OpenVision, OpenWells, OpenWire,
OpenWorks, OpenWorks Well File, PAL, Parallel-VIP, PetroBank, PetroWorks, PetroWorks ULTRA, PlotView, Point Gridding
Plus, Pointing Dispatcher, PostStack, PostStack ESP, PowerCalculator, PowerExplorer, PowerHub, Power Interpretation,
PowerJournal, PowerModel, PowerView, Presgraf, PRIZM, PROFILE, Project Administrator, ProMAGIC, ProMAGIC Connect,
ProMAGIC Server, ProMAX, ProMAX 2D, ProMAX 3D, ProMAX 3DPSDM, ProMAX MVA, ProMAX VSP, pSTAx, Query
Builder, Quick, Quick+, QUICKDIF, QUIKCDP, QUIKDIG, QUIKRAY, QUIKSHOT, QUIKVSP, Quickwell, Quickwell+,
RAVE, RayMap, RayMap+, RTOC, Real Freedom, Real Time Asset Management Center, Real Time Asset Management Centre,
Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, Reference Data Manager, Reservoir
Framework Builder, RESev, ResMap, RightTime, RMS, SCAN, SeisCube, SeisMap, SeisModel, SeisSpace, SeisVision, SeisWell,
SeisWorks, SeisWorks PowerCalculator, SeisWorks PowerJournal, SeisWorks PowerSection, SeisXchange, Sierra, Sierra (design),
SigmaView, SimResults, SIVA, SIVA+, smartSECTION, Spatializer, SpecDecomp, StrataAmp, StrataMap, StrataModel,
StrataSim, StratWorks, StressCheck, STRUCT, Surf & Connect, SynTool, SystemStart for Servers, SystemStart, SystemStart for
Clients, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, Total Drilling Performance, TOW/cs, TOW/cs
Revenue Interface, TracPlanner, Trend Form Gridding, Turbo Synthetics, VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIP-
DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIP-THERM, WavX, Web Editor, Well Seismic Fusion,
Wellbase, Wellbore Planner, Wellbore Planner Connect, WELLCAT, WELLPLAN, WellXchange, WOW, Xsection, You're in
Control. Experience the difference, ZAP!, and Z-MAP Plus are trademarks, registered trademarks or service marks of Landmark
Graphics Corporation.
All other trademarks, service marks and product or service names are the trademarks or names of their respective owners.
Note
The information contained in this document is subject to change without notice and should not be construed as a commitment by
Landmark Graphics Corporation. Landmark Graphics Corporation assumes no responsibility for any error that may appear in this
manual. Some states or jurisdictions do not allow disclaimer of expressed or implied warranties in certain transactions; therefore,
this statement may not apply to you.
Landmark EDT Citrix Guide
Contents
Contents................................................................................................................................. i
Installation ............................................................................................................................ 1
Introduction......................................................................................................................... 1
A Few Important Rules ................................................................................................ 1
Microsoft .NET Framework 1.1 (English) Redistributable Installation ............................. 2
Step A .......................................................................................................................... 2
Step B: NET Framework 1.1 Redistributable installation (Non-silent mode) ............. 4
Step C: Adjusting Security Settings on NET Framework 1.1 Configuration .............. 7
Additional References: ................................................................................................ 8
Landmark 2003.16 Third-Party Components Installation .................................................. 9
MSDE Installation .............................................................................................................. 10
Landmark Engineers Desktop 2003.16 Applications Installation ..................................... 11
Step A .......................................................................................................................... 11
Step B: Install EDM ..................................................................................................... 11
Step C: Install Drilling and Completions Applications ............................................... 11
Step D .......................................................................................................................... 12
R2003.16 Contents i
EDT Citrix Guide Landmark
Server ........................................................................................................................... 25
Client ............................................................................................................................ 25
ii Contents R2003.16
Landmark EDT Citrix Guide
Installation
Introduction
Before you can install the Engineers Desktop applications, you must
have the following prerequisites installed:
Note that MDAC 2.7 SP1 is required for Windows 2000; see Appendix
C for details.
3. You must have .NET 1.1 Framework (not .NET 2.0) or things may
not work properly.
Step A
The person performing the installation must be in the local
Administrators group.
1. Log in as a local Administrator.
You should also have MDAC 2.7 SP 1 and Internet Explorer 6.x before
starting to install .NET Framework 1.1 redistributable.
10. If for some reason Citrix does not start .NET Framework
installation, use Steps 12- 18 to start the .NET Framework 1.1
installation.
11. From the Windows Start menu select Settings > Control Panel.
15. In the Run Installation Program window use the Browse button
to navigate to the Volume 6 CD Drive; CD Drive:\Third-
Party\Install.
18. Click Yes in the Microsoft .NET Framework 1.1 Setup to start the
extraction process, which is followed by:
NET Framework 1.1 does not get removed once Landmark Engineers
Desktop 2003.16 is uninstalled from Citrix server. See Maintenance
Mode on page 15 for more details.
All_Code = Nothing
My_Computer_Zone = Full Trust
LocalIntranet_Zone = LocalIntranet
Internet_Zone = LocalIntranet
Trusted_Zone = LocalIntranet
Restricted_Zone = Nothing
Additional References:
Microsoft. .NET Framework Developers Guide Minimum Configuration
Requirements.msdn 14 Apr 2005.<http://msdn.microsoft.com/library/
default.asp?url=/library/en-us/cpguide/html/
cpconminimumconfigurationrequirements.asp>
MSDE Installation
Landmark Engineers Desktop MSDE 2003.16 Local install is run, and sample EDM
2003.16 database is attached if MSDE Administration is chosen to be installed from
VOL 5.
MSDE cannot be installed if SQL Server 2000 SERVER or CLIENT components are
installed on the machine.
Step A
The person performing the installation must be in the local
Administrators group.
7. When the installation is finished, you must restart the Citrix server.
Step D
8. Provide Full Access (especially Read, Write, Execute, and
Modify) rights to the folder where Landmark Engineers Desktop
2003.16 is installed.
2. From the Windows Start menu, select Programs > Citrix >
Management Console.
EDM Administration
EDM Administration Utility <installation path>\EDM\Admin Utility\Bin\RunAdmin.bat
MSDE Administration
MSDE Administration <installation path>\EDM\MSDE Utility\MSDEUtils.exe
Database Creation
EDM Database Creation <installation path>\EDM\db_create.exe
Tools
Catalog Editor <installation path>\EDM\Catalog Editor\Bin\CatalogEditor.bat
Rig Editor <installation path>\EDM\Rig Editor\RigEditor.bat
EDM Publishing Service <installation path>\Common Files\Data Services\EDTPublishing.exe
EDM Services Controller <installation path>\Common Files\Data Services\DSWSController.exe
EDM to OpenWorks Link <installation path>\EDM\EDM to OpenWorks\EDMtoOpenWorks.bat
Field Office Data Transfer <installation path>\Common Files\Data Services\FOTrans.bat
Unit Converter <installation path>\EDM\Unit Converter\UnitConverter.bat
NPD CDRS Report Generation <installation path>\OpenWells\NPD\RunNPDRept.bat
Symbol Manager <installation path>\Common Files\WellSchematic\SymbolManager.bat"
Maintenance Mode
Tips
To uninstall, you dont need to have the CD inserted into the drive, and
everything can be removed through Add/Remove programs.
DE # 614042
Issue:
Application Logs being full can stop .NET services or start having
errors.
Cause:
Event Log is full or has too many entries.
Workaround:
To clear the Application Event Log; before starting the install,
2. Start > Settings > Control Panel > Administrative Tools >
Event Viewer.
3. In the Event Viewer, right click on Application Log (in the left
pane under Event Viewer(Local)) and from the pull down menu
select the Clear all Events menu item.
7. If the above solution does not work, repeat the same with System
Log in the Event Viewer. If it still does not work, contact
Landmark Graphics Support.
DE # 726576
Issue:
Error generated in Citrix environment when migrating data
(COMPASS For Windows import).
Cause:
Insufficient rights to data transfer folders.
Workaround:
Assign read/write rights to the data transfer folders.
Issue:
On normal desktops Ctrl + F1 key is set to invoke OpenWells Custom
Context Sensitive Help. On many ICA clients, Ctrl + F1 Hot Key by
default invokes a Ctrl + Alt + Del for the CITRIX server itself .
Workaround:
The Hot Key is per-client basis, so users should be able to change it
from their client machines.
Issue:
Templates and Reports generated in CasingSeat and StressCheck are
not being saved to the applications Client folder in a Citrix
environment.
Cause:
The user does not have Read\Write access to the applications Client
folder.
Workaround:
Grant the user Read\Write access to the following folders on the Citrix
system:
<installation directory>\CasingSeat\Client
<installation directory>\StressCheck\Client
Note:
The user must be granted Read\Write access to any folders on the Citrix server
that will be used to save templates and reports .
Application Exclusions:
D:\Program Files\Landmark\EDT_2003.16\Profile\NGProfile.exe
D:\Program
Files\Landmark\EDT_2003.16\StressCheck\Server\stressck.exe
D:\Program
Files\Landmark\EDT_2003.16\CasingSeat\Server\CsngSeat.exe
D:\Program
Files\Landmark\EDT_2003.16\WELLPLAN\Bin\TemplateContai
ner.exe
D:\Program Files\Landmark\EDT_2003.16\Common
Files\WellSchematic\SymbolManager.exe
D:\Program Files\Landmark\EDT_2003.16\Data
Analyzer\da_edm.exe
D:\Program
Files\Landmark\EDT_2003.16\COMPASS\Bin\cfw32.exe
D:\Program
Files\Landmark\EDT_2003.16\COMPASS\Bin\CFW32CMD.exe
D:\Program Files\Landmark\EDT_2003.16\EDM\Unit
Converter\UnitConverter.exe
DLL Exclusions:
sqlunirl.dll
JNILibU.dll
orageneric9.dll
oracore9.dll
Gsprop32.dll
ProfCommonU.dll
gswdll32.dll
Oran9.dll
Application Exclusion
The following section outlines the procedure for excluding application
files from the Citrix Virtual Memory Optimization.
7. Click OK.
8. Repeat this for each executable file to be excluded. These files are
listed on page 21.
9. Once all the executable files have been excluded click OK to close
the Farm Properties dialog.
DLL Exclusion
The following section outlines the procedure for excluding DLL files
from the Citrix Virtual Memory Optimization.
IMPORTANT!
ONLY administrators familiar with editing the registry should carry out this
procedure
AND back up the registry prior to implementing this procedure.
4. The value appears in the list on the right side of the window in edit
mode. Enter the name of the DLL to be excluded.
5. Repeat this for each DLL file to be excluded. These files are listed
on page 21.
6. Once all the DLL files have been excluded close the Registry
Editor.
Server
Citrix MetaFrame Presentation Server for Windows, Enterprise
Edition, Version 4.0.1
Client
NFUSE, Windows Web Client. File Version: 9.150
Operating System
Microsoft Windows 2003 Standard Edition, Service Pack 1
Step A:
The person performing the installation must be in the local
Administrators group.
R2003.16Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Windows
EDT Citrix Guide Landmark
MDAC 2.7 Redistributable Installer does not Install on Windows XP, since
Windows XP is shipped with MDAC 2.7 as a part of the operating system. For
this reason, MDAC 2.7 redistributable installer Mdac_typ.exe has no effect on the
MDAC installation on Windows XP computers. (http://
support.microsoft.com/default.aspx?scid=kb;en-us;Q304432&).
Step B:
The following information has been extracted from Microsoft
Knowledge Base Article 2320601 which discusses all services and
windows applications that need to be shutdown before installation of
MDAC.
The MDAC installation adds new data DLLs, and updates existing
system DLLs. Any DLLs that are in use by an application can lead to a
failed MDAC setup. Prior to installing MDAC, close all applications
that use MDAC with Windows services, and close all applications on
the Citrix server.
Certificate Server
Exchange Server
Internet Explorer
Internet Information Server
Microsoft Office (All Office applications)
Outlook and Outlook Express
SNA Server
SMS Server
SQL Server
Visual Studio (All Development Products)
30 Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Win-
Landmark EDT Citrix Guide
Installation Folder
The MDAC installation will place files in the selected Program Files folder,
as well as the Windows System folder.
TEMP Directory
Use the SET command in Command Prompt to determine the location of the
Windows TEMP directory.
Step C:
The following information has been extracted from Microsoft Support
website2.
R2003.16Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Windows
EDT Citrix Guide Landmark
Ds16gt.dll
Ds32gt.dll
Odbc16gt.dll
Odbc32.dll
Odbc32gt.dll
Odbcad32.exe
Odbcconf.dll
Odbcconf.exe
Odbccp32.cpl
Odbccp32.dll
Odbccr32.dll
Odbcinst.cnt
Odbcinst.hlp
Odbcint.dll
Step D:
11. From the Windows Start menu select the Run command, enter
cmd, and click OK.
12. Change the directory to the RootDrive of the Citrix machine (use
cd SystemRoot).
32 Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Win-
Landmark EDT Citrix Guide
14. If the operating system returns the following statement, the user
session is ready to install applications:
17. If for some reason, Citrix server does not allow you to install,
follow Steps 18 -23 to start the MDAC installation.
18. From the Windows Start menu select Settings > Control Panel.
22. In the Run Installation Program window, use the Browse button
to navigate to the Volume 6 CD; CD Drive:\Third-Party\Install and
run the mdac_typ.exe Self Extracting Cabinet.
R2003.16Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Windows
EDT Citrix Guide Landmark
23. In the Microsoft Data Access Components 2.7 Setup dialog, select
the Licensing Agreement Acceptance and click Next.
24. If MDAC 2.7 SP1 Refresh Setup finds the required space to install
it will start the installation.
25. If MDAC 2.7 SP1 Refresh Setup finds that a required service or a
task is using files that setup needs to install or update; it will come
up with the following window. At this point you can either click
Cancel to exit current MDAC 2.7 SP1 Refresh Setup, close the
task as specified by MDAC 2.7 SP1 Refresh Setup, or continue
with setup and later manually restart server.
34 Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Win-
Landmark EDT Citrix Guide
R2003.16Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Windows
EDT Citrix Guide Landmark
Note:
30. Shutdown and restart the computer. This will automatically return
the computer to Execute mode.
Note:
Once the MDAC installation has been verified, the TEMP directory created
in Step B: 8 can be deleted.
36 Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Win-
Landmark EDT Citrix Guide
31. Upon restart, manually start all services that did not start
automatically.
Note:
Msvcirt.dll (SystemRoot\Windows\System32\)
Msvcrt.dll (SystemRoot\Windows\System32\)
Odbc32.dll (SystemRoot\Windows\System32\)
Odbc32gt.dll (SystemRoot\Windows\System32\)
Odbccp32.cpl (SystemRoot\Windows\System32\)
Odbccp32.dll (SystemRoot\Windows\System32\)
Odbccr32.dll (SystemRoot\Windows\System32\)
Odbccu32.dll (SystemRoot\Windows\System32\)
Odbcint.dll (SystemRoot\Windows\System32\)
Odbcjet.* (SystemRoot\Windows\System32\)
Odbcji32.dll (SystemRoot\Windows\System32\)
Odbcjt32.dll (SystemRoot\Windows\System32\)
CLICONFIG.DLL (SystemRoot\Windows\System32\)
CLICONFIG.EXE (SystemRoot\Windows\System32\)
DBMSRPCN.DLL (SystemRoot\Windows\System32\)
DBNMPNTW.DLL (SystemRoot\Windows\System32\)
MSCPXL32.DLL (SystemRoot\Windows\System32\)
MSORCL32.DLL SystemRoot\Windows\System32\)
ODBCBCP.DLL (SystemRoot\Windows\System32\)
ODBCTRAC.DLL (SystemRoot\Windows\System32\)
SQLSRB32.DLL (SystemRoot\Windows\System32\)
Dbnetlib.dll (SystemRoot\Windows\System32\)
Msdart.dll (SystemRoot\Windows\System32\)
Msxml3.dll (SystemRoot\Windows\System32\)
sqlsrv32.dll (SystemRoot\Windows\System32\)
cliconfg.rll (SystemRoot\Windows\System32\)
msorc32r.dll (SystemRoot\Windows\System32\)
sqlunirl.dll (SystemRoot\Windows\System32\)
msxml3r.dll (SystemRoot\Windows\System32\)
R2003.16Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Windows
EDT Citrix Guide Landmark
38 Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Win-
Landmark EDT Citrix Guide
Additional References:
R2003.16Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Windows
EDT Citrix Guide Landmark
40 Microsoft Data Access (MDAC) 2.7 SP1 Refresh Installation: Appendix CMDAC For Win-
Landmark EDT Citrix Guide
<SecurityClass Name="ServiceControllerPermission"
Description="System.ServiceProcess.ServiceControllerPermission, Sys-
tem.ServiceProcess, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/
>
<SecurityClass Name="RegistryPermission"
Description="System.Security.Permissions.RegistryPermission, mscorlib, Ver-
sion=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="PrintingPermission"
Description="System.Drawing.Printing.PrintingPermission, System.Drawing,
Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
<SecurityClass Name="OleDbPermission"
Description="System.Data.OleDb.OleDbPermission, System.Data, Ver-
sion=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="AllMembershipCondition"
Description="System.Security.Policy.AllMembershipCondition, mscorlib,
Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="SecurityPermission"
Description="System.Security.Permissions.SecurityPermission, mscorlib, Ver-
sion=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="SocketPermission"
Description="System.Net.SocketPermission, System, Version=1.0.5000.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="EnvironmentPermission"
Description="System.Security.Permissions.EnvironmentPermission, mscorlib,
Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="SqlClientPermission"
Description="System.Data.SqlClient.SqlClientPermission, System.Data, Ver-
sion=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="EventLogPermission"
Description="System.Diagnostics.EventLogPermission, System, Ver-
sion=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="FileIOPermission"
Description="System.Security.Permissions.FileIOPermission, mscorlib, Ver-
sion=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="DnsPermission"
Description="System.Net.DnsPermission, System, Version=1.0.5000.0, Cul-
ture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="NamedPermissionSet"
Description="System.Security.NamedPermissionSet"/>
<SecurityClass Name="FileDialogPermission"
Description="System.Security.Permissions.FileDialogPermission, mscorlib,
Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<SecurityClass Name="DirectoryServicesPermission"
Description="System.DirectoryServices.DirectoryServicesPermission, Sys-
tem.DirectoryServices, Version=1.0.5000.0, Culture=neutral, PublicKeyTo-
ken=b03f5f7f11d50a3a"/>
<SecurityClass Name="StrongNameMembershipCondition"
Description="System.Security.Policy.StrongNameMembershipCondition,
mscorlib, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
</SecurityClasses>
<NamedPermissionSets>
<PermissionSet class="NamedPermissionSet"
version="1"
Name="Nothing"
Description="Denies all resources, including the right to execute"/>
<PermissionSet class="NamedPermissionSet"
version="1"
Unrestricted="true"
Name="FullTrust"
Description="Allows full access to all resources"/>
<PermissionSet class="NamedPermissionSet"
version="1"
Name="LocalIntranet"
Description="Default rights given to applications on the local intranet">
<IPermission class="EnvironmentPermission"
version="1"
Read="USERNAME"/>
<IPermission class="FileDialogPermission"
version="1"
Unrestricted="true"/>
<IPermission class="IsolatedStorageFilePermission"
version="1"
Allowed="AssemblyIsolationByUser"
UserQuota="9223372036854775807"
Expiry="9223372036854775807"
Permanent="True"/>
<IPermission class="ReflectionPermission"
version="1"
Flags="ReflectionEmit"/>
<IPermission class="SecurityPermission"
version="1"
Flags="Assertion, Execution, BindingRedirects"/>
<IPermission class="UIPermission"
version="1"
Unrestricted="true"/>
<IPermission class="DnsPermission"
version="1"
Unrestricted="true"/>
<IPermission class="PrintingPermission"
version="1"
Level="DefaultPrinting"/>
<IPermission class="EventLogPermission"
version="1">
<Machine name="."
access="Instrument"/>
</IPermission>
</PermissionSet>
<PermissionSet class="NamedPermissionSet"
version="1"
Name="Internet"
Description="Default rights given to internet applications">
<IPermission class="FileDialogPermission"
version="1"
Access="Open"/>
<IPermission class="IsolatedStorageFilePermission"
version="1"
Allowed="DomainIsolationByUser"
UserQuota="10240"/>
<IPermission class="SecurityPermission"
version="1"
Flags="Execution"/>
<IPermission class="UIPermission"
version="1"
Window="SafeTopLevelWindows"
Clipboard="OwnClipboard"/>
<IPermission class="PrintingPermission"
version="1"
Level="SafePrinting"/>
</PermissionSet>
<PermissionSet class="NamedPermissionSet"
version="1"
Name="SkipVerification"
Description="Grants right to bypass the verification">
<IPermission class="SecurityPermission"
version="1"
Flags="SkipVerification"/>
</PermissionSet>
<PermissionSet class="NamedPermissionSet"
version="1"
Name="Execution"
Description="Permits execution">
<IPermission class="SecurityPermission"
version="1"
Flags="Execution"/>
</PermissionSet>
<PermissionSet class="NamedPermissionSet"
version="1"
Name="Everything"
<IPermission class="DirectoryServicesPermission"
version="1"
Unrestricted="true"/>
<IPermission class="MessageQueuePermission"
version="1"
Unrestricted="true"/>
<IPermission class="ServiceControllerPermission"
version="1"
Unrestricted="true"/>
<IPermission class="OleDbPermission"
version="1"
Unrestricted="true"/>
<IPermission class="SqlClientPermission"
version="1"
Unrestricted="true"/>
</PermissionSet>
</NamedPermissionSets>
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="Nothing"
Name="All_Code"
Description="Code group grants no permissions and forms the root of the code
group tree.">
<IMembershipCondition class="AllMembershipCondition"
version="1"/>
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="My_Computer_Zone"
Description="This code group grants the FullTrust permission set to assemblies
from the My_Computer_Zone. Allows full access to all resources. This code group has been mod-
ified by the Adjust Security Wizard.">
<IMembershipCondition class="ZoneMembershipCondition"
version="1"
Zone="MyComputer"/>
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="Microsoft_Strong_Name"
Description="Code group grants full trust to code signed with the Microsoft
strong name. ">
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"/>
</CodeGroup>
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="ECMA_Strong_Name"
Description="Code group grants full trust to code signed with the ECMA
strong name.">
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="00000000000000000400000000000000"/>
</CodeGroup>
</CodeGroup>
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="LocalIntranet"
Name="LocalIntranet_Zone"
Description="This code group grants the LocalIntranet permission set to assem-
blies from the LocalIntranet_Zone. Default rights given to applications on the local intranet. This
code group has been modified by the Adjust Security Wizard.">
<IMembershipCondition class="ZoneMembershipCondition"
version="1"
Zone="Intranet"/>
<CodeGroup class="NetCodeGroup"
version="1"
Name="NetCodeGroup_1"
Description="Codegroup generated by the .NET Configuration tool">
<IMembershipCondition class="AllMembershipCondition"
version="1"/>
</CodeGroup>
<CodeGroup class="FileCodeGroup"
version="1"
Name="FileCodeGroup_1"
Description="Codegroup generated by the .NET Configuration tool"
Access="Read, PathDiscovery">
<IMembershipCondition class="AllMembershipCondition"
version="1"/>
</CodeGroup>
</CodeGroup>
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="LocalIntranet"
Name="Internet_Zone"
</CodeGroup>
</CodeGroup>
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="Nothing"
Name="Restricted_Zone"
Description="This code group grants the Nothing permission set to assemblies
from the Restricted_Zone. Denies all resources, including the right to execute. This code group
has been modified by the Adjust Security Wizard.">
<IMembershipCondition class="ZoneMembershipCondition"
version="1"
Zone="Untrusted"/>
</CodeGroup>
</CodeGroup>
<FullTrustAssemblies>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="00000000000000000400000000000000"
Name="mscorlib.resources"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="00000000000000000400000000000000"
Name="System"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="00000000000000000400000000000000"
Name="System.resources"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="00000000000000000400000000000000"
Name="System.Data"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="00000000000000000400000000000000"
Name="System.Data.resources"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.Drawing"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.Drawing.resources"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.Messaging"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.Messaging.resources"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.ServiceProcess"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.ServiceProcess.resources"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.DirectoryServices"
AssemblyVersion="1.0.5000.0"/>
<IMembershipCondition class="StrongNameMembershipCondition"
version="1"
PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010
007D1FA57C4AED9F0A32E84AA0FAEFD0DE9E8FD6AEC8F87FB03766C834C99921EB23
BE79AD9D5DCC1DD9AD236132102900B723CF980957FC4E177108FC607774F29E8320E9
2EA05ECE4E821C0A5EFE8F1645C4C0C93C1AB99285D622CAA652C1DFAD63D745D6F2
DE5F17E5EAF0FC4963D261C8A12436518206DC093344D5AD293"
Name="System.DirectoryServices.resources"
AssemblyVersion="1.0.5000.0"/>
</FullTrustAssemblies>
</PolicyLevel>
</policy>
</security>
</mscorlib>
</configuration>
Scenario 1:
Number of independent users exceeds the number of licenses
Result:
As an example, if there are only two EDM licenses; as soon as a third
user launches OpenWells from Client (published either as a Desktop or
an Application), the following message will be displayed by
OpenWells.
Scenario 2:
OpenWells screen flashing and disappearing is primarily because the
same user is launching:
Cause:
The reason is that OpenWells is a single instance JAVA application, and
only one javaw.exe at a time can run for any user. It is not so visible in
OpenWells on a PC.
Scenario 3:
OpenWells splash screen appears and stays there indefinitely.
Cause:
Some Java plug-ins of other applications can cause conflict with
OpenWells. This is because the other applications may not be patched
with correct java version. Such things are rare.