Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MICROMETER HEADS
Shiwa Plant
Mitutoyo micrometer head is manufactured in the two main factories in Japan, Onomi Plant
established in 1977 and Shiwa Plant established in 1979. With state-of-the-art production in
Onomi Plant
technology and equipment, Mitutoyo micrometer head is renowned in the world for its finest
quality.
2
05 page
Standard type
These are micrometer heads which have a specification
mentioned on the JIS standard. Various micrometer
heads with different measuring range, stem type and
body size are available for wider application. You can
choose the best model for your machine design.
14 High-performance
page type
Various high-performance types of non-rotating spindle,
digital display, 1mm and 0.1mm spindle pitches, etc. are
available for your sophisticated application.
36 page
Made-to-order
item
Special micrometer heads with customized spindle tip
and thimble graduation and customer logotype marking
are available from order of 1 pc. The precision lead
screws specially produced by your specifications are also
available.
38 page
Selection guide
Selection guide,
etc.
Mitutoyo traceability system
3
Contents Type/Contents Series No. Page
Ultra-small size ........................................................................................ 148 ............................... 5
Small size ................................................................................................ 148 ............................... 5
Standard ................................................................................................. 148 ............................... 6
Standard ................................................................................................. 148 ............................... 7
Standard ................................................................................................. 148 ............................... 8
Standard ................................................................................................. 149 ............................... 9
Standard ................................................................................................. 150 ............................. 10
Standard ................................................................................................. 151 ............................. 12
Non-rotating spindle ................................................................................ 153 ............................. 14
1mm(.025") pitch ................................................................................... 152 ............................. 15
0.25mm pitch ......................................................................................... 148 ............................. 16
0.1mm pitch ........................................................................................... 148 ............................. 17
Fine feed ................................................................................................. 110 ............................. 19
Large thimble .......................................................................................... 152 ............................. 20
Large thimble, 1mm(0.25") pitch, For XY stage ....................................... 152 ............................. 22
Large thimble, 1mm(0.25") pitch, Non-rotating spindle ........................... 197 ............................. 23
High-accuracy ......................................................................................... 153 ............................. 24
Digit counter ........................................................................................... 250 ............................. 25
Digimatic micrometer head ...................................................................... 350 ............................. 26
Digimatic micrometer head ...................................................................... 164 ............................. 28
Electronic micrometer head ..................................................................... 164 ............................. 31
Precision screw thread .................................................................................................................. 32
Micrometer head fixtures .............................................................................................................. 34
Made-to-order micrometer head .................................................................................................. 36
Micrometer head selection guide .................................................................................................. 38
Fixture self-production guide ........................................................................................................ 40
Maximum load of micrometer head .............................................................................................. 41
Traceability System to National Standard ....................................................................................... 42
4
Series 148
6mm thimble and 4g weight, ultra-small size micrometer head
Ultra-small size for limited space applications.
Range: 5mm/.2" Order No. (metric)
Graduation: 0.02mm/.001" Spherical face Rev. reading
Accuracy: 0.005mm
Spindle face: SKS3(material) Plain stem 148-215
More than HRC60 With clamp nut 148-216
Lapped surface
Scale surface: Hard-Chrome plating Order No. (inch)
Spherical face Rev. reading
Unit: mm
Plain stem 148-217
With clamp nut 148-218
SR 0 0
1. 3.5 -0.010 [3.969 -0.010]
Plain stem Spherical face 5
6
148-215, [148-217]
5
(6.5) 20.5
Mass (g): 4
11.5 (25.5)
Nut 1.8
SR
1. M3.5x0.5 [M4x0.5]
5
Stem with clamp nut Spherical face
2
6
Fixture thickness: 3mm 148-216, [148-218]
5.5 5
(6.5) 20.5
11.5 (25.5) Mass (g): 4
( ): When retracting the spindle until its stroke end. [ ]: Inch model
Series 148
37mm length small size micrometer head. It does not require
Small size large installation space.
Range: 6.5mm/.25" Order No. (metric)
Graduation: 0.01mm/.001" Spherical face Rev. reading
Accuracy: 0.005mm
Spindle face: SKS3(material) Plain stem 148-201 148-205 148-209
More than HRC60 With clamp nut 148-203 148-207 148-211
Lapped surface
Scale surface: Hard-Chrome plating Order No. (inch)
Spherical face Rev. reading
Unit: mm
Plain stem 148-202 148-206 148-210
With clamp nut 148-204 148-208 148-212
0 0
6 -0.008 [6.35 -0.013]
Plain stem Set screw Spherical face Reverse reading
3.5
148-201, [148-202]
148-205, [148-206] 148-209, [148-210]
9.3
40
6 0
(8.5) 21.9 10
Stem with clamp nut 148-203, [148-204] 3 Spherical face Reverse reading
0 0
Fixture thickness: 4mm 6 -0.008 [6.35 -0.013] Set screw 148-207, [148-208] 148-211, [148-212]
3.5
9.3
40
0
Nut, 7.5 10
11.5 M6x0.5 (8.5) 21.9
15 (28.4)
Mass (g): 10
( ): When retracting the spindle until its stroke end. [ ]: Inch model
5
Series 148
Short body design maintaining measuring range for limited
Standard space applications. Three choices of thimble diameter.
Range: 6.5mm/.25"
13mm/.5" Order No. (metric)
Graduation: 0.01mm/.001" 6.5mm range 13mm range
Accuracy: 0.002mm
Spindle face: SKS3(material) 15mm thimble 20mm thimble 29mm thimble 15mm thimble 20mm thimble 29mm thimble
More than HRC60 Plain stem 148-301 148-303 148-305 148-307 148-309 148-311
Lapped surface With clamp nut 148-302 148-304 148-306 148-308 148-310 148-312
Scale surface: Hard-Chrome plating
Set screw
[9.525 -0.013]
[9.525 -0.013]
Set screw
-0.009
0
9.5 -0.009
0
0
6.35
0
12
9.5
5
5
6.35
15
20
o o
45
45
9.5 9.5
(12) 23.5 (12) 23.5
Stem with clamp nut Thimble diameter: 15mm Thimble diameter: 29mm
Fixture thickness: 6mm Range: 6.5mm Range: 6.5mm
148-302, [148-352] 148-312, [148-362]
[9.525 -0.013
[9.525 -0.013
Set screw
-0.009
Nut
9.5 -0.009
0
0
0
0
14
9.5
6.35
14
12
5
6.35
29
15
0 o
45
4 4 45
9.5 9.5
( ): When retracting the spindle until its stroke end. [ ]: Inch model
6
Series 148
Common type in small size micrometer head with 13mm
Standard measuring range.
Range: 13mm/.5" Order No. (metric)
Graduation: 0.01mm/.001" Spherical face Rev. reading
Accuracy: 0.002mm
Spindle face: SKS3(material) Plain stem 148-104 148-801 148-821
More than HRC60 With clamp nut 148-103 148-802 148-822
Lapped surface With spindle lock 148-121 148-803 148-823
Scale surface: Hard-Chrome plating
With c. nut, s. lock 148-120 148-804 148-824
Unit: mm
Order No. (inch)
Spherical face Rev. reading
Plain stem 148-112 148-811 148-831
With clamp nut 148-111 148-812 148-832
With spindle lock 148-123 148-813 148-833
With c. nut, s. lock 148-122 148-814 148-834
5
13
5
45
0
0
45
5
9.5 3.5
(14) 31.5
Mass (g): 30 27 (44.5)
Stem with clamp nut 148-103, [148-111] Spherical face Reverse reading
Fixture thickness: 6mm 4 148-802, [148-812] 148-822, [148-832]
14
0 0
9.5 -0.009 [9.525 -0.013 ] Set screw
5
45
13
5
0 0
5
45
Nut,
M9.5x0.5 9.5 3.5
(14) 31.5
Mass (g): 35 27 (44.5)
Plain stem and spindle lock 148-121, [148-123] Spherical face Reverse reading
148-803, [148-813] 148-823, [148-833]
0 0
9.5 -0.009 [9.525 -0.013]
15 Spindle lock Set screw
45
5 5
13
5
45
9.5 3.5
(14) 40.1
Mass (g): 40
27 (53.1)
0
5
0
5
45
Nut,
M9.5x0.5 9.5 3.5
(14) 40.1
Mass (g): 45 27 (53.1)
( ): When retracting the spindle until its stroke end. [ ]: Inch model
7
Series 148
Small size micrometer head with 13mm measuring range. All-
Standard stainless steel model is available.
Range: 13mm/.5"
Graduation: 0.01mm/.001" Order No. (metric)
Accuracy: 0.002mm Spherical face Rev. reading Stainless steel
Spindle face: SKS3(material)
More than HRC60 Plain stem 148-503 148-853 148-863 148-513
Lapped surface With clamp nut 148-508 Call Mitutoyo Call Mitutoyo Call Mitutoyo
Scale surface: Hard-Chrome plating With spindle lock 148-506 Call Mitutoyo Call Mitutoyo -
With c. nut, s. lock 148-504 148-854 148-864 -
Unit: mm
Order No. (inch)
Spherical face Rev. reading Stainless steel
Plain stem 148-501 148-851 148-861 148-511
With clamp nut 148-507 Call Mitutoyo Call Mitutoyo Call Mitutoyo
With spindle lock 148-505 Call Mitutoyo Call Mitutoyo -
With c. nut, s. lock 148-502 148-852 148-862 -
Plain stem 148-503, [148-501], 148-513(stainless), [148-511(stainless)] Spherical face Reverse reading
0 0 148-853, [148-851] 148-863, [148-861]
9.5 -0.009 [9.525 -0.013 ]
5
45
13
5
0 0
5
45
9.5
(12) 37
Mass (g): 35
25 (50)
5
13
5
45
9.5
Nut
M9.5x0.5 (12) 37
Mass (g): 40
25 (50)
0 0
9.5 -0.009 [9.525 -0.013 ]
15 Spindle lock
5
13
5
45
9.5
(12) 45.6
25 (58.6)
Mass (g): 45
0
5
0
5
45
9.5
Nut
M9.5x0.5 (12) 45.6
25 (58.6)
Mass (g): 50
( ): When retracting the spindle until its stroke end. [ ]: Inch model
8
Series 149
Small size micrometer head with 15mm measuring range.
Standard Employing carbide tip spindle.
Range: 15mm/.5" Order No. (metric)
Graduation: 0.01mm/.001" Spherical face Rev. reading
Accuracy: 0.002mm
Spindle face: Carbide tip Plain stem 149-132 149-801 149-821
More than HRA90 With clamp nut 149-131 149-802 149-822
Lapped surface With spindle lock 149-183 Call Mitutoyo Call Mitutoyo
Scale surface: Hard-Chrome plating
With c. nut, s. lock 149-184 Call Mitutoyo Call Mitutoyo
Unit: mm
Order No. (inch)
Spherical face Rev. reading
Plain stem 149-148 149-811 149-831
With clamp nut 149-147 149-812 149-832
With spindle lock 149-185* Call Mitutoyo Call Mitutoyo *With rachet model [149-181] is available.
With c. nut, s. lock 149-182 Call Mitutoyo Call Mitutoyo
15
0
45
45
0
5
15 3.5
(17) 43.5
32 (58.5)
Mass (g): 55
Stem with clamp nut 149-131, [149-147] Spherical face Reverse reading
4
Fixture thickness: 11.5mm 149-802, [149-812] 149-822, [149-832]
14
0
9.5 -0.009 0
[9.525 -0.013 ] Set screw
5
6.35
15
0 45
0
45
5
Nut 15 3.5
M9.5x0.5 (17) 43.5
32 (58.5)
Mass (g): 60
0 0
9.5 -0.009 [9.525 -0.013 ]
15 Spindle lock Set screw
5
6.35
15
45
9.5 3.5
(11.5) 49
26.5 (64)
Mass (g): 55
15
45
Nut
M9.5x0.5 9.5 3.5
(11.5) 49
26.5 (64)
Mass (g): 60
( ): When retracting the spindle until its stroke end. [ ]: Inch model
9
Series 150
The most commom micrometer head with 25mm measuring range.
Standard
Range: 25mm/ 1"
Graduation: 0.01mm/.001" Order No. (metric)
0.001mm/.0001"(vernier) Spherical face Rev. reading With vernier Without ratchet Long spindle
Accuracy: 0.002mm
Spindle face: Carbide tip/SKS3* Plain stem 150-192 150-801 150-821 150-190 150-196 150-219
More than HRA90/HRC60* With clamp nut 150-191 150-802 150-822 150-189 150-195 150-220
Lapped surface With spindle lock 150-209 Call Mitutoyo Call Mitutoyo Call Mitutoyo 150-211 Call Mitutoyo
Scale surface: Hard-Chrome plating
With c. nut, s. lock 150-210 Call Mitutoyo Call Mitutoyo Call Mitutoyo 150-212 Call Mitutoyo
5
6.35
18
0
45
15 17
(17) 67
42 (92)
Mass (g): 95
5
6.35
14
18
45
15 17
Nut
M9.5x0.5 (17) 67
42 (92)
20
18
45
15 17
(17) 78.5
42 (103.5)
spindle lock
0
Fixture thickness: 11.5mm 10 -0.009
0
[9.525 -0.013 ] Spindle lock Ratchet
4
5
6.35
20
14
18
45
15 17
Nut
M9.5x0.5 (17) 78.5
42 (103.5)
Mass (g): 115
( ): When retracting the spindle until its stroke end. [ ]: Inch model
10
Spherical face Reverse reading With vernier Without ratchet Long spindle (without ratchet)
150-801, [150-811] 150-821, [150-831] 150-190, [150-206] 150-196 150-219, [150-221]
6 5
45 4
2
0
0
0 5 65
45
5
Whole length: 133.5
Whole length: 95.5
Spherical face Reverse reading With vernier Without ratchet Long spindle (without ratchet)
150-802, [150-812] 150-822, [150-832] 150-189, [150-205] 150-195 150-220, [150-222]
6 5
45 4
2
0
0
0 5 65
45
5
Whole length: 95.5 Whole length: 133.5
6 5
4
2
0
0 5
45
6 5
4
2
0
0 5
45
( ): When retracting the spindle until its stroke end. [ ]: Inch model
11
Series 151
The most Heavy-duty model(8mm spindle) in the standard
micrometer heads for high-load application.
Standard
Range: 25mm/1", 50mm/2" Order No. (metric)
Graduation: 0.01mm/.001"
25mm range 50mm range
0.001mm/.0001"(vernier)
Accuracy: 0.002mm (25mm/1) With vernier Without ratchet Without ratchet
0.004mm (50mm/2) Plain stem 151-224 151-222 151-227 151-256 151-260
Spindle face: Carbide tip
With clamp nut 151-223 151-221 151-228 151-255 151-259
More than HRA90
Lapped surface With spindle lock 151-214 151-212 151-225 - -
Scale surface: Hard-Chrome plating With c. nut, s. lock 151-213 151-211 151-226 - -
Unit: mm
Order No. (inch)
1range 2range
With vernier Without ratchet Without ratchet
Plain stem 151-240 151-238 Call Mitutoyo 151-272 -
With clamp nut 151-239 151-237 Call Mitutoyo - 151-271
With spindle lock Call Mitutoyo 151-243* 151-241 - -
With c. nut, s. lock Call Mitutoyo 151-244* 151-242 - - *Without ratchet
0
21
45
29 17
(38) 70
63 (95) Mass (g): 150
0
12 -0.011 [12.7-0.018]
8
5
21
45
29 17
M12x0.5 (38) 70
63 (95)
Mass (g): 155
5
22
21
45
19 17
(28.6) 79.4
53.6 (104.4)
spindle lock
8
21
45
19 17
Nut,
M12x0.5 (28.6) 79.4
53.6 (104.4)
12
Wihtout ratchet Plain stem Wihtout ratchet Stem with clamp nut
151-260 151-256, [151-272] 151-259, [151-271] 151-255
8 8
Whole length: 177.5
M12x0.5
Nut,
16
88
88
4
(38)
(38)
12 -0.011 [12.7-0.018]
29
29
12 -0.011 [12.7-0.018]
0
With vernier
0
151-222, [151-238]
0
0
5
6
4
2
0
45
45
0 5
5
5
0
0
45
With vernier
151-221, [151-237]
103
103
5
6
4
2
0 21 21
0 5 45
(153)
(153)
With vernier
[151-243]
17
17
5
Ratchet
6
Ratchet
4
2
0
0 5 45
With vernier
[151-244]
5
6
4
2
0
0 5 45
( ): When retracting the spindle until its stroke end. [ ]: Inch model
13
Non-rotating spindle model.
Series 153
Non-rotating The spindle is fed straight without rotation.
This avoids workpiece rotation for torsion-free
spindle feeding and reduces workpiece deformation
and wear.
Spindle face: Carbide tip
More than HRA90
Lapped surface
Scale surface: Hard-Chrome plating
Unit: mm
14.8
0
6.35
15.3
0
45
10
(12) 58.5
27 (73.5)
Mass (g): 70
14.8
0
Ratchet
0
8
5 6 5
4
2
0
18
0 0 5
45
45
10
(12) 87.5
Mass (g): 125
37 (112.5)
153-204, [153-208]
[12.7-0.018
12-0.011
0
14.8
0
8
5
6 5
4
2
0
18
0
0 5
45
45
10
(12) 70.5
Mass (g): 125
37 (95.5)
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
153-101 15mm 0.01mm 153-108* .5 .0001 Plain Flat (with carbide tip) 0.003mm Without ratchet, *with vernier
153-201 25mm 0.01mm 153-205 1 .001 Plain Flat (with carbide tip) 0.003mm With ratchet
153-202 25mm 0.001mm 153-206 1 .0001 Plain Flat (with carbide tip) 0.003mm With ratchet, with vernier
153-203 25mm 0.01mm 153-207 1 .001 Plain Flat (with carbide tip) 0.003mm Without ratchet
153-204 25mm 0.001mm 153-208 1 .0001 Plain Flat (with carbide tip) 0.003mm Without ratchet, with vernier
( ): When retracting the spindle until its stroke end. [ ]: Inch model
14
1mm pitch micrometer head.
Series 152
1mm(.025) 1mm/rotation (standard: 0.5mm/rotation)
spindle allows quick feeding and postitioning.
pitch This eliminates misreading of 0.5mm
graduation on the sleeve.
Spindle face: Carbide tip
More than HRA90
Lapped surface
Scale surface: Hard-Chrome plating
Unit: mm
20
0
8
10
30
0
90
80
16
(19) 60
34 (75) Mass (g): 220
Speeder
[12.7-0.018 ]
12 -0.011
0
20
0
8
10
30
90
80
16
(19) 69
44 (94) Mass (g): 230
Speeder
[12.7-0.018 ]
12 -0.011
0
20
0
8
10
30
90
80
16
(19) 94
69 (144)
Mass (g): 350
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
152-101 15mm 0.01mm 152-110 .5 .001 Plain Flat (with carbide tip) 0.002mm
152-102 25mm 0.01mm 152-111 1 .001 Plain Flat (with carbide tip) 0.002mm
152-103 50mm 0.01mm 152-112 2 .001 Plain Flat (with carbide tip) 0.004mm
( ): When retracting the spindle until its stroke end. [ ]: Inch model
15
0.25mm pitch micrometer head.
Series 148
0.25mm pitch 0.25mm/rotation (standard: 0.5mm/rotation)
spindle allows fine feeding and precise
positioning.
Spindle face: SKS3
More than HRC60
Lapped surface
Scale surface: Hard-Chrome plating
Fixture thickness: 6mm
Unit: mm
0
4
9.5 -0.009 Set screw
14
0
SR 9.5 -0.009 Set screw
4 SR
5
5
5
5
13
13
0
20
20
9.5 3.5
9.5 3.5
(14) 31.5 Nut,
M9.5x0.5 (14) 31.5
27 (44.5)
27 (44.5)
0
0
9.5 -0.009 Set screw 4 9.5 -0.009 Set screw
14
6.35
6.35
SR SR
4 4 5
5
15
0
15
20
20
9.5 9.5
Nut,
(12) 23.5 M9.5x0.5 (12) 23.5
18.5 (30) 18.5 (30)
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
148-132 13mm 0.01mm Plain Spindle (SR4) 0.002mm
148-133 13mm 0.01mm With clamp nut Spindle (SR4) 0.002mm
148-322 6.5mm 0.01mm Plain Spindle (SR4) 0.002mm
148-323 6.5mm 0.01mm With clamp nut Spindle (SR4) 0.002mm
16
0.1mm pitch micrometer head.
Series 148
0.1mm pitch Fine Pitch
Micrometer Heads
Spindle face: SKS3
More than HRC60 0.1mm/rotation (standard: 0.5mm/rotation)
Lapped surface spindle allows fine feeding and precise
Scale surface: Hard-Chrome plating
Fixture thickness: 6mm* positioning. Also, it provides greater
conservation of space.
*4mm for 148-243
Unit: mm
14
0
9.5 -0.009 Set screw 4 Set screw
9.5 -00.009
SR SR
4 4 20
20
10 10
13
5
13
5
0 0
90
90
80 80
4 0
9.5 -0.009 Set screw
15
0
14
15
SR
SR 4
4 10
10
6.35
0
0
90
90
17
Plain stem 148-242 Stem with clamp nut 148-243
0
6 -0.008 Set screw 3
0
6 -0.008 Set screw
3.5
SR
3
3.5
20
SR
3
0
80
9.3
9.3
(8.5) 21.9 8 7.5
15 (28.4) Nut (8.5) 21.9
M6x0.5 15 (28.4)
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
148-142 6.5mm 0.002mm Plain Spindle (SR4) 0.002mm
148-143 6.5mm 0.002mm With clamp nut Spindle (SR4) 0.002mm
148-242 6.5mm 0.002mm Plain Spindle (SR3) 0.005mm
148-243 6.5mm 0.002mm With clamp nut Spindle (SR3) 0.005mm
148-342 6.5mm 0.002mm Plain Spindle (SR4) 0.002mm
148-343 6.5mm 0.002mm With clamp nut Spindle (SR4) 0.002mm
18
Ultra-fine feed micrometer head.
Series 110
Fine feed The differential movement of spindle threads
and nuts allows ultra-fine feeding (1/20
resolution of standard type.)
Spindle face: Carbide tip/SKS3*
More than HRA90/HRC60*
Lapped surface
Scale surface: Hard-Chrome plating
Fixture thickness: 6mm/11.5mm*
*110-502, 110-504
Unit: mm
0 0
4 12-0.011 [12.7-0.018]
The differential movement
8
16
21
0
feeding of 0.05mm/rotation.
45
Nut, Non-rotating spindle.
M12x0.5 12.7
(35.2) 70
37.7 (95)
4 0
12 -0.011 0
[12.7-0.018 ] Set screw
Spherical face,
With vernier:
8
16
5
110-108, [110-118]
18.6
21
45
Nut,
M12x0.5 12.7
(36.7) 62.5
37.7 (72.5)
Thimble(coarse)
21
4 0
9.5 -0.009 0
[9.525 -0.013 ] Thimble(fine) The dual-thimble mechanism
14
4
5 Set screw allows independent operations
3
SR3 2
1
5 of fine and coarse feeding.
13
0 0
24
22
21
15 20
Nut,
M9.5x0.5 (17) 67.5
(0.5mm/rotation).
30 (80.5)
Mass (g): 95
Order No.
Metric Inch
Stem Spindle face Accuracy
Order No. Range Graduation Order No. Range Graduation
110-101 2.5mm 0.001mm 110-111 .05 .00005 With clamp nut Flat Wide/Narrow range: 0.005/0.0015mm
110-102 2.5mm 0.0001mm 110-112 .05 .000005 With clamp nut Flat Wide/Narrow range: 0.005/0.0015mm
110-105 1mm 0.001mm 110-115 .02 .00005 With clamp nut Flat Wide/Narrow range: 0.003/0.0015mm
110-106 1mm 0.0001mm 110-116 .02 .000005 With clamp nut Flat Wide/Narrow range: 0.003/0.0015mm
110-107 1mm 0.001mm 110-117 .02 .00005 With clamp nut Spherical (SR10) Wide/Narrow range: 0.003/0.0015mm
110-108 1mm 0.0001mm 110-118 .02 .000005 With clamp nut Spherical (SR10) Wide/Narrow range: 0.003/0.0015mm
110-502 13mm* 0.01mm* 110-504 .5* .001* With clamp nut Spherical Wide range: 0.003mm*
[0.2mm]** [0.0005mm]** [.006]** [.00002]** [Wide/Narrow range: 0.003/0.0015mm]**
* Coarse feeding
**Fine feeding
( ): When retracting the spindle until its stroke end. [ ]: Inch model
19
Micrometer head with large thimble.
Series 152
Large thimble The large thimble employment allows high
resolution (1/5 of standard type) and very light
of rotation. The spindle pitch is 0.5mm.
Spindle face: Carbide tip
More than HRA90
Lapped surface
Scale surface: White anodized aluminium
Unit: mm
120
100
Speeder
80
Nut
12 -0.011
60
0
16
40
6.35
20
49
0
480
460
440
M12x0.5 4
420
400
26 380
(35) 53
45 (63) Mass (g): 190
120
100
80
[12.7-0.018 ]
Speeder
12-0.011
60
0
0
40
8
20
0
49
480
460
440
420
400
380
29
(38) 66
63 (91)
Mass (g): 310
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
152-283 10mm 0.002mm With clamp nut Flat (with carbide tip) 0.002mm
152-332 25mm 0.002mm Plain Flat (with carbide tip) 0.002mm
152-348 25mm 0.002mm 152-372 1 .0001 Plain Flat (with carbide tip) 0.002mm Bidirectional graduation
152-380 50mm 0.002mm 152-388 2 .0001 Plain Flat (with carbide tip) 0.004mm Bidirectional graduation
( ): When retracting the spindle until its stroke end. [ ]: Inch model
20
Plain stem Bidirectional graduation: 152-380, [152-388]
88
(38)
0 0
12 -0.011 [12.7-0.018 ]
29
38
12
40
10
42
44
46
48
8
4
0
2
12
38
10
40
42
44
46
48
8
0
2
99
49
(149)
Speeder
( ): When retracting the spindle until its stroke end. [ ]: Inch model
21
Series 152 Micrometer head specially designed for cross-travel stage.
Large thimble 1mm spindle pitch allows quick feeding and
1mm (.025) pitch positioning. Large thimble provides clear
reading of thimble graduation and increases
For XY stage measurement efficiency. The thimble figures of
Spindle face: Carbide tip/SKS3*
More than HRA90/HRC60*
Y-axis model are marked in the same direction
Lapped surface of spindle feeding for easy reading.
Scale surface: White anodized aluminium
20 80
18 -0.011
Speeder
0
10 90
80 90 0 10 20
11
20 10 0 90 80
6.35
0 0
49
1.5 10
90 10
152-401, 152-403
Zero setting ring
20
2 4 6 8 0
18 -0.011
0
10
0
8
17 80 20
8
6 90 0 10
4
2
49
0
51
10
SR
2 0~6 90
The zero setting ring allows
14 80
spindle movement without
(30.7) 84.2 thimble position change for
55.7 (109.2)
easy zero setting.
Mass (g): 460
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
152-390 25mm 0.005mm 152-392 1 .0001 Plain Flat (non-rotating device) 0.002mm Bidirectional graduation, For X-axis
152-389 25mm 0.005mm 152-391 1 .0001 Plain Flat (non-rotating device) 0.002mm Bidirectional graduation, For Y-axis
152-402* 25mm 0.001mm 152-404 1 .0001 Plain Spherical (SR10 carbide tip) 0.002mm *With vernier, For X-axis
152-401* 25mm 0.001mm 152-403 1 .0001 Plain Spherical (SR10 carbide tip) 0.002mm *With vernier, For Y-axis
22
Series 197 Non-rotating spindle micrometer head with large thimble.
Large thimble 1mm spindle pitch allows quick feeding and
1mm (.025) pitch positioning. Large thimble provides clear
reading of thimble graduation and increases
Non-rotating spindle measurement efficiency. Non-rotating spindle
Spindle face: Carbide tip
More than HRA90
avoids workpiece rotation for torsion-free
Lapped surface feeding and reduces workpiece deformation
Scale surface: White anodized aluminium
and wear.
Unit: mm
20 80
18 -0.011
0
10 90
8
49
0 0
90 10
80 20
14
(29) 64
79 (89)
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
197-101 50mm 0.005mm 197-201 2 .0002 Plain Flat (carbide tip) 0.005mm Bidirectional graduation
23
High-resolution, high-accuracy micrometer head.
Series 153
High-accuracy The micrometer heads developed for the
instruments require high-accuracy such as
measuring tools and inspection equipment.
The spindle pitch is 0.5mm.
Spindle face: Carbide tip Non-rotating spindle model
More than HRA90
Lapped surface
Scale surface: White anodized aluminium
Unit: mm
6 44
5 45
4 46
3 47
18 -0.02
0
2 48
0 2.0
8
0.5 1.5 1 49
1.0 1.0
38.1
85.5
1.5 0.5
A 2.0 0 0 0
49 1
48 2
47 3
46 4
45 5
44 6
31.8
(35.4) 75
60.4 (100)
PCD28
120 120
3-M4X0.7
View from A
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
153-301 25mm 0.0005mm 153-302 1 .00001 Plain Flat (carbide tip) Wide/Narrow range: Bidirectional graduation,
0.001mm/0.0005mm With vernier
24
Micrometer head with digit counter
Series 250
Digit counter The digit counter gives 0.01mm reading of
spindle movement. This eliminates operators
misreading. The spindle pitch is 0.5mm.
Spindle face: Carbide tip
More than HRA90
Lapped surface
Scale surface: Hard-Chrome plating
Unit: mm
18
0
9 45
0 0 0 0
9
mm
15
(17) 93.8
42 (118.8)
Order No.
Metric Inch
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
250-301 25mm 0.01mm 250-312* 1 .0001 Plain Flat (carbide tip) 0.002mm *With vernier
( ): When retracting the spindle until its stroke end. [ ]: Inch model
25
Series 350
Digimatic micrometer head enhanced by use of LCD digital readout
Digimatic Mitutoyo's lineup of Digimatic micrometer
heads, that anyone can read without fail with
micrometer a minimum digital reading of 0.001mm, offers
head a waterproof type of protection level IP65.
Spindle face: Carbide tip
More than HRA90
Lapped surface
Scale surface: Hard-Chrome plating
Fixture thickness: 11.5mm
Unit: mm
15
18
[12.7-0.018]
12 -0.011
0
0
Spherical face
(58)
Ratchet
350-283, [350-383]
52.7
Non-rotating device Slotted bush (standard accessory)
(27.7) 1 0 .011
(without ratchet) 2 +0
(1.5) 10 14 0 .01 8 -0
1
350-261, [350-361]
6.35
6.35
11
0
14
12 -0.011
0
[12.7-0.018] Mass (g): 235
4
6.35
5
18
45
[12.7-0.018]
M12 x 0.5
12 -0.011
0
0
(58)
350-284, [350-384]
Order No.
Metric Inch
Stem Spindle face Accuracy
Order No. Range Resolution Order No. Range Resolution
*350-251 25mm 0.001mm *350-351 1 .00005 Plain Flat (carbide tip) 0.002mm/ .0001
*350-252 25mm 0.001mm *350-352 1 .00005 With clamp nut Flat (carbide tip) 0.002mm/ .0001
*350-253 25mm 0.001mm *350-353 1 .00005 Plain Spherical (SR4) 0.002mm/ .0001
*350-254 25mm 0.001mm *350-354 1 .00005 With clamp nut Spherical (SR4) 0.002mm/ .0001
350-281 25mm 0.001mm 350-381 1 .00005 Plain Flat (carbide tip) 0.002mm/ .0001
350-282 25mm 0.001mm 350-382 1 .00005 With clamp nut Flat (carbide tip) 0.002mm/ .0001
350-283 25mm 0.001mm 350-383 1 .00005 Plain Spherical (SR4) 0.002mm/ .0001
350-284 25mm 0.001mm 350-384 1 .00005 With clamp nut Spherical (SR4) 0.002mm/ .0001
350-261 25mm 0.001mm 350-361 1 .00005 Plain Flat (non-rotating device) 0.002mm/ .0001
*These models are not a waterproof type.
( ): When retracting the spindle until its stroke end. [ ]: Inch model
26
Unit: mm
42 114.5
(17) (139.5)
15
6.35
18
[9.525 -0.013
0
]
10 -0.009
0
Ratchet
(58)
Spherical face
350-253 Mass (g): 230
42 114.5
(17) 139.5
15
4
18
6.35
[9.525 -0.013]
14
0
10 -0.009
M9.5 x 0.5
0
Ratchet
(58)
Spherical face
350-254
( ): When retracting the spindle until its stroke end. [ ]: Inch model
27
Digimatic micrometer with LCD display for digital readout
Series 164
Digimatic
micrometer
head
Spindle face: Carbide tip
More than HRA90
Lapped surface
Body material: Plastic (Black)
Unit: mm
Speeder
-0.011
0
18
8
14
(16)
41 69 21 15
Mass (g): 160
28
Functions
PRESET button (origin point setting)
Any value from +999.999 to -999.999 can be set as an origin point in ABS
mode.
ZERO/ABS button
The measurement mode is changed from ABS to INC mode and the
display indication is set to zero by clicking on the button.
The measurement mode is changed from INC to ABS mode and the
display indication is restored to the current spindle position in ABS mode
by holding down the button.
+/- button
The counting direction can be changed.
Data output function
One data output connector is provided to be linked to the Mitutoyo
Statistical Process Control (M-SPC) system as well as remote display
counter EC-101D. Optional connecting cable: 937387 (1m/40),
965013(2m/80)
16.8 15
View from A
Order No.
Metric Inch/metric
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
164-171 25mm 0.001mm 164-172 1 .00005/0.001mm Plain Flat (carbide tip) 0.002mm Non-rotating spindle
29
Plain stem 164-161, 164-162
11 2
0
18 -0.02
14
54
12.2 22 25
Display
ON / OFF
+/-
PRESET
ZERO / ABS
141
DATA
49
15
Order No.
Metric Inch/metric
Stem Spindle face Accuracy Remarks
Order No. Range Graduation Order No. Range Graduation
164-161 50mm 0.001mm 164-162 2 .00005/0.001mm Plain Flat (carbide tip) 0.003mm Non-rotating spindle
30
Series 164 Electronic micrometer head and remote display counter.
Electronic The spindle displacement can be read from the
micrometer remote display counter with large indication
head panel. 2-axis display counter can present 2-axis
Spindle face: Carbide tip spindle displacements derived from two
More than HRA90 electronic micrometer heads.
Lapped surface
Scale surface: Black anodized
aluminium
Unit: mm
4
18 -0.011
3
0
2
8
1
38
88
49
48
47
46
45
44
30 43
(35) 85
31
Mitutoyo offers made-to-order precision lead screw which is produced according
to your specification under precise and accurate screw machining technology
backed by long experience in micrometer production.
Precision lead
screw
Mitutoyo manufactures simple and less expensive precision lead screws for precise positioning mechanisms and
fine feed mechanisms, in addition to the conventional micrometer heads.
Mitutoyo also manufactures screws with special specifications, such as 0.1 mm pitch, as well as those with the
standard 0.5 mm feed pitch and with dimensions and forms that meet customers requirements.
Durability: 100 thousand times are guaranteed (use condition: 4 kgf load; 2 kgf for AS-6.5 and BS-6.5)
Main applications Drive motor
Precision feed stages
Pinion
Fine adjustment of optical elements (mirrors, prisms)
Fiber optic centering devices
Various assembly and adjustment jigs
Precision lead screw
Use example
External Dimensions
Type AS: Straight type
AS-25
Stem diameter
of bottom
of sleeve
Diameter
tip
L1 15 25 42
Stem
L3 9 7.5 15.5 27
of top tip
Diameter
of bottom
Diameter
of sleeve
L4 6 8 10
tip
L5 3 4 4
Measuring face Hardening With Carbide tip
Mass (g) 10 11 27 30 61 64 L3 L5
32
Type 1 Type 2
l=P (pitch) x 5 (mm) If the lead screw has a step on the external surface, L
E.g.: If P is 0.5mm, must design l = 2.5mm and dimension must be designed over 10mm.
Stroke L - (l + 2l) l=P (pitch) x 5 (mm)
E.g.: If P is 0.5mm, must design l = 2.5mm and
Stroke L - (l + 2l)
Sleeve Sleeve
Spindle Spindle
d
D
d
D'(h6)
Material Material
Spindle: SKS3 or equivalence (harder than HRC60) Spindle: SKS3 or equivalence (harder than HRC60)
Sleeve: Easy-cutting steel (Brass is available.) Sleeve: Easy-cutting steel (Brass is available.)
Accuracy Accuracy
Feeding accuracy: 0.002mm Feeding accuracy: 0.003mm
Screw/nut clearance: 0.005mm Screw/nut clearance: 0.005mm
Feeding deflection (Spindle): Less than 0.003mm Feeding deflection (Spindle): Less than 0.003mm
Feeding deflection (Sleeve mounting surface): Less than Feeding deflection (Sleeve mounting surface): Less than
0.005mm 0.005mm
33
Do you spend money on troublesome production of micrometer head fixture?
Mitutoyo offers various fixtures which are well designed for customer convenience.
All fixtures are made of cast iron (FC45 with nickel plating).
Micrometer
Micrometer head / Fixture reference table
head fixtures Micrometer head Fixture Applicable stem specifications
303560, 303562, 303564, 303566 9.5 X 9.5mm plain stem
Series 148 (Page 8, 16)
303559, 303561, 303563, 303565 9.5 X 9.5mm stem with clamp nut
303569, 303571, 303573, 303575 9.5 X 15mm plain stem
Series 149 (Page 9)
303568, 303570, 303572, 303574 9.5 X 15mm stem with clamp nut
303579, 303581, 303583, 303585 10 X 15mm plain stem
Series 150 (Page 10, 11)
303578, 303580, 303582, 303584 10 X 15mm stem with clamp nut
Stage
Micrometer head
Fixture
B Order No. 303559 303568 303578 B Order No. 303563 303572 303582
A 9.5 9.5 10 A 9.5 9.5 10
B 6 11.5 11.5 B 6 11.5 11.5
A
A
2-K C 15 20 20 C 30 40 40
F
D
J
D 20 30 30 D 37.5 50 50
D
C
G
H G F 5 7 7 F 15 18 18
G 11 16 16 H E G 10 15 15
C E I
H 8 12 12 H 15 20 20
I 0.5 1.75 1.75 I 3.4 4.5 4.5
J 27.5 40 40
K 3.4 4.5 4.5
Order No. 303561 303570 303580 Order No. 030565 303574 303584
B C B
A 9.5 9.5 10 C A 9.5 9.5 10
E
B 6 11.5 11.5 2-K B 6 11.5 11.5
A
C 40 60 60 C 15 15 15
D
J
A
E 30 40 40 E 25 40 40
D H G
2-G F 15 20 20 F 8.5 8.5 8.5
F E L
G 3.4 4.5 4.5 G 7.5 10 10
H 10 20 20
I 10 15 15
J 27.5 35 35
K 3.4 4.5 4.5
L 0.75 1.25 1.25
34
Recommended fixing screws
Fixture Hex-socket screw 1 Washer 2 1
303559, 303560, 303561, 303562,
M3X0.5X8 Size 3, round type
303563, 303564
303565, 303566 M3X0.5X12 Size 3, round type
303568, 303569, 303570, 303571, 2
303572, 303573, 303578, 303579, M4X0.7X10 Size 4, round type
303580, 303581, 303582, 303583
303574, 303575, 303584, 303585 M3X0.7X12 Size 4, round type
B Order No. 303560 303569 303579 Order No. 303564 303573 303583
K B
M
A 9.5 9.5 10 K I A 9.5 9.5 10
B 9 14.5 14.5 B 9 14.5 14.5
A
2-L
C 15 20 20 C 30 40 40
A
J
E 23 35 35 E 4 6 6
D
F
H G F 5 7 7 F 15 18 18
G
2-J
G 11 16 16 G 10 15 15
C E I
H 8 12 12 H 15 20 20
I 1.5 3.25 3.25 H E I 4.5 7.25 7.25
J 32.5 42.5 42.5 J 3.4 4.5 4.5
K 4.5 7.25 7.25 K M3X0.5 M3X0.5 M3X0.5
L 3.4 4.5 4.5
M M3x0.5 M3x0.5 M3x0.5
Order No. 303562 303571 303581 Order No. 303566 303575 303585
B E C B
A 9.5 9.5 10 K
A 9.5 9.5 10
G M
B 9 14.5 14.5 B 9 14.5 14.5
C 15 15 15 C 15 15 15
A
D
J
E 40 60 60 E 25 40 40
I
F J C 2-I
F 3 5 5 F 8.5 8.5 8.5
G 30 40 40 H G G 7.5 10 10
F E
H 15 20 20 H 10 20 20
I 3.4 4.5 4.5 I 10 15 15
J M3X0.5 M3X0.5 M3X0.5 J 32.5 40 40
K 4.5 7.25 7.25
L 3.4 4.5 4.5
M M3X0.5 M3X0.5 M3X0.5
35
Mitutoyo micrometer heads are used in various application fields. Although various
ready-made micrometer heads are provided to meet various customer demands,
customization is still required to meet more suitable specification.
Mitutoyo offers such made-to-order micrometer head even from one piece
Made-to-order production onwards.
micrometers
1. Spindle
Long spindle is also
2. Stem
Various stem types are available according to your
3. Graduation
Reverse graduation, vertical
available. fixing specification. graduation, etc. are available.
The color of figure and
Standard (flat) Plain graduation on the thimble can
be changed from normal black
to red.
Spherical Standard
0 5 10 15 5
0
With clamp nut 45
Point Reverse
25 20 15 10 45
15
5
0
0
45
20
15
10
Flange
5
Flange
Specified zero point
10 5 0 5 5
45
Graduation only
Blade
36
Thimble attachment
4. Special logotype
Your company logotype
5. for motor drive
operation
Several thimble
6. Thimble setting
Ratchet, set screw and
7. Spindle pitch
The standard spindle pitch is 0.5mm.
can be marked on the attachments for motor drive hex-socket head screw are 1mm pitch for quick feeding and
thimble. operation by gear, round- available for thimble 0.25mm pitch for fine feeding are
belt, flat-belt, timing-belt, setting. available. Inch pitch is also available.
etc. are available. Solid-
constructed thimble and
attachment is available. 8. Screw lubricant
Screw lubricant can be specified
Ratchet
for your application.
Stem
Plain stem Stem with clamp nut
Plain
The stem is a part to be used for micrometer head clamping. It is classified into Plain stem
or Stem with clamp nut. The stem diameter is designed according to the size of the
micrometer head itself. The upper and lower tolerance limit values are mentioned on the
catalog with h6 specification.
The micrometer head with clamp nut can be fixed to the stage easily and firmly. While
additional preparation of slotting or adhesive bonding is necessary for the plain stem type.
However, the plain stem type has a wider applicable range and allows stem position tuning
in forward/backward direction.
Mitutoyo offers various optional fixtures for general use. Refer to page 36.
Spindle face
Measuring range (spindle stroke)
Six measuring ranges from 5 to 50mm are
Flat spindle Spherical spindle Non-rotating spindle
available for standard type micrometer head.
Choose the suitable range by considering
The micrometer head with a flat spindle is Figure A
some allowance for spindle movement.
generally used for a measuring instrument. Even though the required measuring range is
The micrometer head with a spherical spindle 2 or 3mm, choice of 25mm range model is
is suitable for a feeding device since the Figure B
more economical if there is enough space for
feeding error caused by the inclined installation.
installation can be minimized. (Fig A) The The measuring range can be extended by
combination of a carbide ball and flat spindle Figure C
using a gauge block. (Fig D)
(Fig B) provides the same effect as Fig A. The broken line on each micrometer head
Mitutoyo recommends the use of the non- drawing shows the thimble position at the
rotating spindle type micrometer head when stroke end. Carefully consider this point for
it is used for the delicate or high-accuracy your jig design.
application. (Fig C)
Gauge block
The flat spindle and flat contact surface
combination is recommended for high-
durable applications. Head stroke
Available stroke
38
Spindle lock Non-rotating spindle Ultra-fine feed
When using the micrometer head as The spindle is fed straight without Ultra-fine feed micrometer heads
a stopper, Mitutoyo recommends to rotation. This avoids workpiece employ the differential movement
use a micrometer head with spindle rotation for torsion-free feeding and mechanism which are available for
clamp to avoid problem due to a reduces workpiece deformation and the applications requiring ultra-fine
loose spindle. Special clamping wear. feeding like a manipulator.
mechanism is employed to eliminate
spindle displacement at clamping.
Thimble diameter
10 80
suitable for a stopper and space priority applications.
Standard
5 0 5
0 0
0 5 25 20
0
90 10
80 20
45
Graduation
If you want to obtain (read) the spindle displacement, Bidirectional graduation provides both positive and
pay attention to the specifications of the thimble/sleeve negative counting. The figures on thimble and sleeve
graduation. are specified by color (black and red) for clear reading.
Standard graduation is the same graduation as an Digimatic and electronic micrometer heads which have
outside micrometer. When retracting the spindle, an internal or external display counter are available for
positive counting is provided. direct reading. These micrometer heads can be linked to
Reverse graduation provides positive counting when the Mitutoyo Statistical Process Control (M-SPC) system.
projecting the spindle.
39
When mounting the micrometer head, it is fixed with its stem. Therefore the
secured stem clamping method without affecting inside mechanism must be chosen
for accuracy. Although the most popular three clamping methods are introduced
below, Mitutoyo recommends the use of Clamp nut or Slotted fixture method.
Fixture self-
production guide
Unit: mm
Fixing method Using clamping unt Using slotted fixture Using set screw
Plane A
Mounting hole fitting 9.5, 10mm stem: G7 (+0.005 to +0.020) 9.5, 10mm stem: G7 (+0.005 to +0.020) 9.5, 10mm stem: H5 (+0.000 to +0.006)
tolerance value (mm) 12, 18mm stem: G7 (+0.006 to +0.024) 12, 18mm stem: G7 (+0.006 to +0.024) 12, 18mm stem: H5 (+0.000 to +0.008)
Remarks Take care the perpendicularity of the Remove carefully burr on the slot. Suitable set screw size: M3X0.5 or
plane A against the setting hole. M4X0.7
Tolerance of perpendicularity: Countersink on the stem:
Less than 0.16/6.5 (same as that of Less than 90X0.5
grade 2 screw center tolerance value) When countersinking, take care not to
cause stem deformation.
40
The maximum loading capacity of micrometer head cannot be quantified since it
varies according to the clamping method, type of the load applied (statistic load or
active load) and operating conditions (used as a feeding device or stopper).
Maximum load Mitutoyo recommended loading limit value is as follows when the micrometer head
of micrometer is used as a measuring instrument within its accuracy guaranteed stroke (within 0.1
million manual rotations). The static load test result carried out by using a small size
head micrometer head is also mentioned below.
P P
Mounting nut
Setscrew
Bracket
41
Traceability System of Mitutoyo Standard
Traceability of length field Traceability of
temperature field
National Metrology Institute of Japan / National Institute of Advanced Industrial Science and Technology (NMIJ/AIST)
633nm Iodine Stabilized He-Ne Laser <National (Primary) Standard> NMIJ/AIST
Temperature fixed points
once/3years National (Primary)
Standard>
Mitutoyo Metrology Calibration Center (JCSS Accredited Cal. Lab. No.0031)
633nm Iodine Stabilized He-Ne Laser <Secondary Standard>
CNLA
NABL
SAC-
DSM
JCSS
Accreditation
NITE
body
Mitutoyo Thailand (Cholburi Branch)
(Length and Temperature) No.0031
No.LA-1996-0102-C-2-1
Mitutoyo Techno Service
No.LA-1996-0102-C-4
No.LA-1996-0102-C-1
No.LA-1996-0102-C-2
No.LA-1996-0102-C-3
Mitutoyo Malaysia
Mitutoyo Thailand
(Indonesia office)
Mitutoyo Taiwan
(Force) No.0086
No.SAMM152
No.C-0349
No.0336
No.0030
No.0078
No.0109
Accredited
calibration
laboratory
AIST: National Institute of Advanced Industrial Science NML: National Measurement Laboratory CLAS: Calibration Laboratory Assessment Service
and Technology CNLA: Chinese National Laboratory Accreditation SCC: Standards Council of Canada
NMIJ: National Metrology Institute of Japan SIRIM: Standards and Industrial Research Institute of Malaysia CENAM: Centro Nacional de Metrologa
JCSS: Japan Calibration Service System DSM: Department of Standards Malaysia EMA: Entidad Mexicana de Acreditacin, a.c.
NITE: National Institute of Technology and Evaluation NIST: National Institute of Standards and Technology NPL: National Physical Laboratory
IAJapan: International Accreditation Japan A2LA: American Association for Laboratory Accreditation UKAS: United Kingdom Accreditation Service
SPRING: Standards, Productivity and Innovation Board NRC-INMS: National Research Council of Canada-Institute for
SAC: Singapore Accreditation Council National Measurement Standards
42
Traceability of test equipment
National Institute of Information
National Metrology Institute of Japan / National Institute of Advanced Industrial Science and Technology (NMIJ/AIST) and Communications Technology
once/5years once/3years
Mitutoyo Kawasaki Mitutoyo Metrology Japan Electric Meters
Calibration Center Calibration Center Inspection Corporation
(JCSS Accredited Cal.Lab.No.0086) (JCSS Accredited Cal. Lab. No.0031)
Force-proving Instruments 633nm Iodine Stabilized He-Ne Laser
<Secondary Standard> <Secondary Standard>
Japan Quality
Assurance Organization
Hardness
Reference Machine
USA Canada Mexico UK Netherlands Germany Switzerland Italy Sweden Brazil Argentina
NIST NRC- CENAM NPL NMI PTB METAS IMGC SP INMETRO INTI
INMS
EA
(MRA)
CLAS/SCC
SWEDAC
UKAS
A2LA
EMA
OAA
DKD
RBC
RvA
SAS
SIT
Mitutoyo America Field Service
Mitutoyo Schweiz
No.DKD-K-14501
Mitutoyo Canada
Mitutoyo Italiana
(Length) No.031
Mitutoyo UK
No.2003-05
No.0750.01
No.1472.01
No.1643.01
No.SCS074
No.DZA-10
No.LC 010
No.K 086
No.K 107
No.0332
No.1794
No.D-45
No.107
NMi: Nederlands Meetinstituut SP: Swedish National Testing and Research Institute NPLI: National Physical Laboratory of India
RvA: Raad voor Accreditatie SWEDAC: Swedish Board for Accreditation NABL: National Accreditation Board for Testing
PTB: Physikalisch-Technische Bundesanstalt and Conformity Assessment and Calibration Laboratories
DKD: Deutscher Kalibrierdienst INMETRO: Instituto Nacional de Metrologia Normalizao (ILAC): International Laboratory Accreditation Cooperation
METAS: The Swiss Federal Office of Metrology and Accreditation e Qualidade Industrial (APLAC): Asia-Pacific Laboratory Accreditation Cooperation
SAS: Swiss Accreditation Service RBC: Rede Brasileira de Calibrao (EA): European Accreditation Cooperation
IMGC: Istituto di Metrologia "GUSTAVO COLONNETTI" INTI: Instituto Nacional de Tecnologia Industrial (MRA): Mutual Recognition Arrangement
SIT: Servizio di Taratura in Italia OAA: Organismo Argentino de Acreditaci #: Accreditation No.
43
133.50 0704 5 B (WZ)NE, Printed in Japan
Our products are classed as regulated items under Japanese
Foreign Exchange and Foreign Trade Law. Please consult us
in advance if you wish to export our products to any other
country. If the purchased product is exported, even though
it is not a regulated item (Catch-All controls item), the
customer service available for that product may be affected.
If you have any questions, please consult your local Mitutoyo
sales office.
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other
technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights.
The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. Only quotations submitted by ourselves
may be regarded as definitive.
Our products are classed as regulated items under Japanese Foreign Exchange and Foreign Trade Law. Please consult us in advance if you wish to export our products to
any other country. If the purchased product is exported, even though it is not a regulated item (Catch-All controls item), the customer service available for that product
may be affected. If you have any questions, please consult your local Mitutoyo sales office.