Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BuyersGuide
Sheet
Rod
Tube
Film
MassiveShapes
MaterialsFor:
Bearing&Wear
Corrosionresistance
FireSafeFM4910
Structural
Hightemperature
ElectrostaticDissipative
ElectricallyActive/Conductive
Highpurity
FDACompliant&NSFListedGrades
MedicalGradeUSPclassVI&ISO109935
21567252252156725582Faxsales@tridentplastics.comwww.tridentplastics.com
07/10/2013
TridentPlasticsInc.
Index Page
ABS...35
AcetalPOMC...67
DelrinAcetalPOMH89
DelrinAF...1011
Nylon66...1214
Nylon6... 1516
Acrylic... 17
Polycarbonate... 1822
GlassfilledLEXAN3412R 23
Fluoropolymers...24
KYNAR740PVDF.. 2526
HALARECTFE... 2728
NORYLEN265...2930
GlassfilledNORYLSE1GFN331
PET...3233
PEEK...3436
ULTEM1000PEI... 3738
GlassfilledULTEM2300PEI39
Polysulfone...4041
PPS...4243
UHMWPE...4445
HDPE...4647
LDPE...48
Polypropylene... 4950
CopolymerPolypropylene51
PVC,TypeI... 5253
CPVC...54
TermsandConditions 55
TridentPlasticsInc.
1029PulinskiRoadIvylandPA18974
21567252252156725582Faxsales@tridentplastics.comwww.tridentplastics.com
07/10/2013
ABS
HighImpactEngineeringGradeFlameRetardant
Applications
Structuralcomponents
ABSisanamorphousterpolymerofacrylonitrile,butadieneandstyrene.Usualcompositionsare Housings
abouthalfstyrenewiththebalancedividedbetweenbutadieneandacrylonitrile. Supportblocks
Models
StockshapesmadefromABSresinareinexpensiveandeasytofabricate.ABSisanexcellent Machinedprototypes
choiceforapplicationswhichrequirehighimpactresistance,strengthandstiffness.ABSisan
idealmaterialformachiningstructuralcomponentsandpreproductionprototypes. Characteristics
Lightweight
Becauseofitsgoodbalanceofproperties,toughnessstrengthtemperatureresistancecoupled Easytofabricate
withitseaseofprocessing,ABShasaverywiderangeofapplications. Goodstrength&stiffness
Highimpactresistance
Excellentaestheticproperties
.187" 0.0070 3.56 4.98 6.41 7.83 9.26 10.68 12.10 15.66 18.51 .187" 1.01 7.24
.250" 0.0094 4.76 6.66 8.57 10.47 12.37 14.28 16.18 20.94 24.75 .250" 1.35 9.68
.375" 0.0141 6.44 9.02 11.60 14.18 16.75 19.33 21.91 28.35 33.50 .375" 2.03 13.10
.500" 0.0188 8.59 12.03 15.46 18.90 22.34 25.77 29.21 37.80 44.67 .500" 2.71 17.47
.625" 0.0235 10.74 15.03 19.33 23.63 27.92 32.22 36.51 47.25 55.84 .625" 3.38 21.84
.750" 0.0282 12.89 18.04 23.20 28.35 33.51 38.66 43.81 56.70 67.01 .750" 4.06 26.21
12" x 12"
1.00" 0.0376 17.18 24.06 30.93 37.80 44.67 51.55 58.42 75.60 89.35 1.00" 5.41 34.95 12" x 48"
1.25" 0.0470 30.07 38.66 47.25 55.84 64.43 73.02 94.50 111.68 1.25" 6.76 43.68 24" x 24"
24" x 48"
1.50" 0.0564 36.08 46.39 56.70 67.01 77.32 87.63 113.40 134.02 1.50" 8.12 52.42
48" x 48"
1.75" 0.0657 54.12 66.15 78.18 90.21 102.23 132.30 156.36 1.75" 9.47 61.16 48" x 72"
2.00" 0.0751 68.73 82.47 96.22 109.97 116.84 164.95 178.70 2.00" 10.82 69.89 48" x 96"
48" x 120"
2.50" 0.0939 144.54 168.63 192.72 204.76 289.07 313.16 2.50" 13.53 122.49
3.00" 0.1127 Contactcustomerserviceforvolumediscounts 229.70 262.51 315.01 393.77 525.02 3.00" 16.23 166.85
3.50" 0.1315 2156725225 342.72 411.27 514.08 685.44 3.50" 18.94 217.83
4.00" 0.1503 email: sales@tridentplastics.com 520.02 650.03 866.70 4.00" 21.64 275.43
Itemslistedwithastrikethrougharenonstocksizes 4.50" 24.35 497.02
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks. 5.00" 27.05 552.24
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.022 $0.62 PRICE 1.500 0.805 $11.72 PRICE 4.000 5.727 $82.33
0.312 0.035 -- PER 1.625 0.945 -- PER 4.250 6.464 --
0.375 0.050 0.89 LINEAR 1.750 1.096 15.79 LINEAR 4.500 7.249 103.75
0.437 0.068 -- FOOT 1.875 1.258 -- FOOT 5.000 8.949 128.57
0.500 0.089 1.28 2.000 1.432 20.30 5.500 10.828 155.63
5'&10' 5'&10'
0.562 0.113 -- 2.125 1.616 -- 6.000 12.887 184.96
STANDARD STANDARD
0.625 0.140 2.00 2.250 1.812 -- 6.500 15.124 --
LENGTHS LENGTHS
0.750 0.201 2.89 2.500 2.237 32.02 7.000 17.540 315.79 StandardPlateTolerance
0.875 0.274 -- CUSTOM 2.750 2.707 -- CUSTOM 8.000 22.909 428.56 Thickness:PlusOnly
1.000 0.358 5.09 3.000 3.222 45.90 9.000 28.995 -- Length/Width:+.500"/.00"
SIZES SIZES
1.125 0.453 -- AVAILABLE 3.250 3.781 -- AVAILABLE 10.000 35.796 -- RoundBarTolerance
ON ON .250"2.00":+.005"/.00"
1.250 0.559 8.00 3.500 4.385 62.60 12.000 51.546 --
REQUEST REQUEST 2.125"2.75":+.031"/.00"
1.375 0.677 -- 3.750 5.034 -- 14.000 70.160 -- 3.00"14.000":PlusOnly
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.022 PRICE 1.500 0.805 PRICE 4.000 5.727
0.312 0.035 PER 1.625 0.945 PER 4.250 6.464
0.375 0.050 LINEAR 1.750 1.096 LINEAR 4.500 7.249
0.437 0.068 FOOT 1.875 1.258 FOOT 5.000 8.949
0.500 0.089 500 LB 2.000 1.432 500 LB 5.500 10.828 500 LB
5'&10' 5'&10'
0.562 0.113 MINIMUM 2.125 1.616 MINIMUM 6.000 12.887 MINIMUM Standard Plate Tolerance
ORDER STANDARD ORDER STANDARD ORDER
0.625 0.140 2.250 1.812 6.500 15.124 Thickness: Plus Only
CALL LENGTHS CALL LENGTHS CALL
0.750 0.201 2.500 2.237 7.000 17.540 Length/Width: +.500"/-.00"
FOR FOR FOR
0.875 0.274 PRICE 2.750 2.707 PRICE 8.000 22.909 PRICE
CUSTOM CUSTOM Round Bar Tolerance
1.000 0.358 SIZES 3.000 3.222 SIZES 9.000 28.995
Plus Only
1.125 0.453 AVAILABLE 3.250 3.781 AVAILABLE 10.000 35.796
1.250 0.559 ON 3.500 4.385 ON 12.000 51.546
REQUEST REQUEST
1.375 0.677 3.750 5.034 14.000 70.160
Applications
Acetalpolymers,referredtochemicallyasPOMPolyOxyMethylene,aresemicrystalline Structuralcomponents
engineeringthermoplasticsmadebythepolymerizationofformaldehyde.Theyhave Bearings,bushings,wearpads
physicalpropertiesthatarenotavailablewithmetalsormostotherplastics;high Gears
mechanicalstrengthandrigidity,lowcoefficientsoffriction,lowmoistureabsorption, Rollers
excellentdimensionalstability,fatigueendurance,andresistancetoabrasionand Electricalcomponents
creep.Thesematerialsarealsoresistanttoawiderangeofsolventsandhavegood Jigsandfixtures
electricalproperties. Pumpandvalveparts
Medicalcomponents
Characteristics
StandardGrades/Colors:Specifications: CustomGrades: Lowmoistureabsorption
AcetalCopolymerPOMC ASTMD6778POM0211(resinspec) ESDElectrostaticdissipative Lowcoefficientoffriction
Natural(white)ASTMD6100SPOM0211(shapespec) Conductive,Carbonfilled Highstrengthandstiffness
BlackFDA21CFR177.2470 Metaldetectable Excellentelectricalproperties
Blue Callforpriceandavailability Goodchemicalresistance
Easytofabricate
.187" 0.0096 4.52 6.33 8.14 9.95 11.76 13.57 15.38 19.90 23.52 .187" 1.38 9.20
.250" 0.0128 5.46 7.65 9.83 12.02 14.20 16.39 18.58 24.04 28.41 .250" 1.85 11.11
.375" 0.0193 8.20 11.47 14.75 18.03 21.31 24.59 27.86 36.06 42.61 .375" 2.78 16.67
.500" 0.0257 10.93 15.30 19.67 24.04 28.41 32.78 37.15 48.08 56.82 .500" 3.70 22.22
12"x12"
.625" 0.0322 13.66 19.12 24.59 30.05 35.51 40.98 46.44 60.10 71.02 .625" 4.63 27.78 12"x48"
.750" 0.0386 16.39 22.95 29.50 36.06 42.61 49.17 55.73 72.12 85.23 .750" 5.56 33.34 24"x24"
24"x48"
1.00" 0.0515 21.85 30.59 39.34 48.08 56.82 65.56 74.30 96.16 113.64 1.00" 7.41 44.45
48"x48"
1.25" 0.0644 38.24 49.17 60.10 71.02 81.95 92.88 120.19 142.05 1.25" 9.27 55.56 48"x72"
1.50" 0.0771 45.89 59.00 72.12 85.23 98.34 111.45 144.23 170.46 1.50" 11.10 66.67 48"x96"
48"x120"
1.75" 0.0903 68.84 84.14 99.43 114.73 130.03 168.27 198.87 1.75" 13.00 77.78
2.00" 0.1028 87.41 104.90 122.38 139.86 148.60 209.79 227.28 2.00" 14.80 88.90
2.250" 0.1160 118.01 137.68 157.34 167.18 236.02 255.69 2.250" 16.70 100.01
2.50" 0.1285 131.12 152.97 174.83 185.75 262.24 284.09 2.50" 18.50 111.12
2.750" 0.1417 Contactcustomerserviceforvolumediscounts 168.27 192.31 230.77 288.47 384.62 2.750" 20.40 122.23
3.00" 0.1542 2156725225 183.57 209.79 251.75 314.69 419.59 3.00" 22.20 133.34 12"x12"
3.50" 0.1806 244.76 293.71 367.14 489.52 3.50" 26.00 155.57 12"x24"
email: sales@tridentplastics.com 12"x48"
4.00" 0.2063 335.67 419.59 559.45 4.00" 29.70 177.79
24"x24"
4.50" 33.35 256.80 24"x36"
5.00" 37.05 285.29 24"x48"
ROUNDBAR
6.00" 44.46 342.34
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.030 $0.30 PRICE 1.500 1.070 $5.34 PRICE 4.000 7.611 $46.33
0.312 0.046 0.43 PER 1.625 1.256 6.65 PER 4.250 8.593 65.39
0.375 0.067 0.51 LINEAR 1.750 1.457 7.20 LINEAR 4.500 9.633 68.68
0.437 0.091 0.85 FOOT 1.875 1.672 9.26 FOOT 5.000 11.893 80.64
0.500 0.119 0.81 2.000 1.903 9.41 5.500 14.390 93.99
5'&10' 5'&10'
0.562 0.150 1.32 2.125 2.148 12.10 6.000 17.126 117.94
STANDARD STANDARD
0.625 0.186 1.26 2.250 2.408 12.84 6.500 20.099 146.06
LENGTHS LENGTHS
0.750 0.268 1.32 2.500 2.973 17.62 7.000 23.310 176.98 StandardPlateTolerance
0.875 0.364 2.02 CUSTOM 2.750 3.598 20.91 CUSTOM 8.000 30.445 217.14 Thickness:PlusOnly
1.000 0.476 2.40 3.000 4.281 26.53 9.000 38.533 308.98 Length/Width:+.500"/.00"
SIZES SIZES
1.125 0.602 3.39 AVAILABLE 3.250 5.025 35.50 AVAILABLE 10.000 47.571 378.71 RoundBarTolerance
ON ON .250"2.00":+.005"/.00"
1.250 0.743 3.78 3.500 5.827 39.91 12.000 68.502 545.34
REQUEST REQUEST 2.125"2.75":+.031"/.00"
1.375 0.899 5.15 3.750 6.690 45.81 14.000 93.239 742.29 3.00"14.000":PlusOnly
DuPontDelrinisahomopolymeracetalwhichoffersanexcellentbalanceofpropertiesthat Applications
bridgethegapbetweenmetalsandplastics.Delrinshapespossesseshightensilestrength, Structuralcomponents
creepresistanceandtoughness.Italsoexhibitslowmoistureabsorption.Itischemically Bearings,bushings,wearpads
resistanttohydrocarbons,solventsandneutralchemicals.Thesepropertiesalongwithitsfatigue Gears
endurancemakeDelrinshapesidealformanyindustrialapplications. Rollers
Electricalcomponents
Delrin150acetalhomopolymeroffersslightlyhighermechanicalpropertiesthanacetal Jigsandfixtures
copolymer,butmaycontainalowdensitycenter(alsoknownas"centerlineporosity")especially Pumpandvalveparts
inlargecrosssections.Delrinalsogivesslightlylesschemicalresistancethancopolymeracetal.
Asanexample,Delrinisidealforsmalldiameter,thinwalledbushingsthatbenefitfromthe Characteristics
additionalstrengthandrigidityofhomopolymeracetal. Lowmoistureabsorption
Lowcoefficientoffriction
StandardGrades/Colors:Specifications: CustomGrades: Highstrengthandstiffness
DELRIN150 ASTMD6778POM0111(resinspec) DELRIN570Glassfilled
Excellentelectricalproperties
FDAcompliantNatural ASTMD6100SPOM0111(shapespec) DELRIN527uvresistant
(white) FDA21CFR177.2470(NaturalOnly) DELRIN511P
Goodchemicalresistance
Black(nonFDA) DELRIN100AF&500AF Easytofabricate
.187" 0.0096 6.84 9.57 13.67 16.41 19.14 21.87 26.25 32.81 43.75 .187" 1.38 13.90
.250" 0.0128 8.51 11.92 17.03 20.43 23.84 27.24 32.69 40.87 54.49 .250" 1.85 17.32 12" x 12"
.375" 0.0193 12.79 17.91 25.59 30.70 35.82 40.94 49.13 61.41 81.88 .375" 2.78 26.02 12" x 48"
24" x 24"
.500" 0.0257 15.96 22.35 31.93 38.31 44.70 51.08 61.30 76.62 102.16 .500" 3.70 32.47
24" x 48"
.625" 0.0322 19.98 27.97 39.95 47.94 55.93 63.92 76.71 95.88 127.84 .625" 4.63 40.63 48" x 96"
.750" 0.0386 23.99 33.58 47.98 57.57 67.17 76.76 92.11 115.14 153.52 .750" 5.56 48.79 48" x 120"
1.00" 0.0515 31.50 44.09 62.99 75.59 88.19 100.79 120.94 151.18 201.57 1.00" 7.41 64.06
1.25" 0.0644 55.16 78.80 94.56 110.32 126.09 151.30 189.13 252.17 1.25" 9.27 80.14
1.50" 0.0771 62.08 88.68 106.42 124.16 141.90 170.27 212.84 283.79 1.50" 11.10 90.19
1.75" 0.0903 103.86 124.64 145.41 166.18 199.42 249.28 332.37 1.75" 13.00 105.63
2.00" 0.1028 118.25 141.90 165.54 189.19 227.03 283.79 378.39 2.00" 14.80 120.25 12" x 12"
2.250" 0.1160 160.11 186.80 213.48 256.18 320.22 426.96 2.250" 16.70 135.69 12" x 24"
12" x 48"
2.50" 0.1285 177.37 206.93 236.49 283.79 354.74 472.98 2.50" 18.50 150.31 24" x 24"
2.750" 0.1417 Contactcustomerserviceforvolumediscounts 228.18 260.78 312.94 391.17 521.56 2.750" 20.40 165.75 24" x 48"
3.00" 0.1542 2156725225 248.32 283.79 340.55 425.69 567.58 3.00" 22.20 180.38
3.50" 0.1806 332.37 398.84 498.55 664.73 3.50" 26.00 211.25
email: sales@tridentplastics.com
4.00" 0.2063 455.60 569.50 759.33 4.00" 29.70 241.31
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.030 $0.57 PRICE 1.500 1.070 $9.78 PRICE 4.000 7.611 $66.06
0.312 0.046 0.70 PER 1.625 1.256 12.19 PER 4.250 8.593 --
0.375 0.067 0.87 LINEAR 1.750 1.457 12.83 LINEAR 4.500 9.633 106.58
0.437 0.091 1.27 FOOT 1.875 1.672 16.09 FOOT 5.000 11.893 123.74
0.500 0.119 1.41 2.000 1.903 16.36 5.500 14.390 154.80
5'&10' 5'&10'
0.562 0.150 2.03 2.125 2.148 19.73 6.000 17.126 166.03
STANDARD STANDARD
0.625 0.186 2.04 2.250 2.408 21.61 6.500 20.099 CALL
LENGTHS LENGTHS
0.750 0.268 2.55 2.500 2.973 26.21 7.000 23.310 FOR Standard Plate Tolerance
0.875 0.364 3.85 2.750 3.598 29.96 8.000 30.445 PRICE Thickness: Plus Only
CUSTOM CUSTOM
1.000 0.476 4.47 3.000 4.281 36.64 Length/Width: +.500"/-.00"
SIZES SIZES
1.125 0.602 6.27 AVAILABLE 3.250 5.025 48.95 AVAILABLE Round Bar Tolerance
ON ON .250" - 2.00": + .005"/-.00"
1.250 0.743 6.94 3.500 5.827 55.26
REQUEST REQUEST 2.125" - 2.75": +.031"/-.00"
1.375 0.899 9.10 3.750 6.690 -- 3.00" - 8.00": Plus Only
DELRINAFBLENDisauniquethemoplasticmaterialforuseinmovingpartsinwhichlowfriction Applications
andlongwearlifeareimportant.ItisacombinationofPTFEfibersuniformlydispersedinDELRIN Bearings,bushings,wearpads
Acetalresin.ThiscombinationoffersbetterwearcharacteristicsthanunfilledDELRIN.DELRIN Gears
AFBLEND,suppliedasa2:1blendofDELRINAF100andDELRIN150resins,hasexcellentsliding Rollers
/frictionproperties.BearingsmadeofDELRIN Electricalcomponents
AFBLENDcanoperateathigherspeedswhileexhibitingreducedwear.Thesebearingsarealso Jigsandfixtures
essentiallyfreeofslipstickbehaviorbecausethestaticanddynamiccoefficientoffrictionare Pumpandvalveparts
closerthanwithmostplastics.DELRINAFBLENDretains90%ofthestrengththatisinherentin
unmodifiedDELRINAcetal.SomepropertiesarechangedduetotheadditionofthesofterPTFE Characteristics
fiber. Lowmoistureabsorption
Lowcoefficientoffriction
StandardGrades/Colors:Specifications: CustomGrades: Highstrengthandstiffness
DELRIN100AFBlend ASTMD677805POM0110L13B45340 DELRIN100AF(unblended) Excellentelectricalproperties
13.3%PTFEFiberfilled DELRIN500AF(unblended) Goodchemicalresistance
DELRINAFDE588 Easytofabricate
(20%PTFEFiberfilled)
.187" 0.0101 41.91 58.68 83.83 100.60 117.36 134.13 160.95 201.19 268.25 .187" 1.46 85.25
.250" 0.0135 47.73 66.83 95.47 114.56 133.65 152.75 183.30 229.12 305.49 .250" 1.95 97.08
.375" 0.0203 69.44 97.21 138.87 166.65 194.42 222.20 266.63 333.29 444.39 .375" 2.93 141.23
.500" 0.0271 101.63 142.29 203.27 243.92 284.57 325.23 390.27 487.84 650.46 .500" 3.90 206.71
.625" 0.0339 121.49 170.09 242.98 291.57 340.17 388.77 466.52 583.15 777.53 .625" 4.88 247.10
.750" 0.0406 139.68 195.56 279.37 335.24 391.12 446.99 536.39 670.49 893.98 .750" 5.85 284.10
1.00" 0.0542 184.74 258.64 369.48 443.38 517.27 591.17 709.40 886.75 1,182.34 1.00" 7.80 375.74
12" x 12"
1.25" 0.0677 321.72 459.61 551.53 643.45 735.37 882.44 1,103.05 1,470.74 1.25" 9.75 467.40 12" x 24"
1.50" 0.0813 356.30 509.00 610.80 712.59 814.39 977.27 1,221.59 1,628.79 1.50" 11.70 517.62 12" x 48"
24" x 24"
1.75" 0.0948 616.14 739.37 862.59 985.82 1,182.99 1,478.73 1,971.64 1.75" 13.65 626.58
24" x 48"
2.00" 0.1083 648.85 778.62 908.39 1,038.16 1,245.79 1,557.24 2,076.32 2.00" 15.60 659.85
2.250" 0.1219 1,031.57 1,203.50 1,375.43 1,650.52 2,063.15 2,750.86 2.250" 17.55 874.21
2.50" 0.1354 1,031.57 1,203.50 1,375.43 1,650.52 2,063.15 2,750.86 2.50" 19.50 874.21
2.750" 0.1490 Contactcustomerserviceforvolumediscounts 1,413.53 1,615.47 1,938.56 2,423.20 3,230.93 2.750" 21.45 1,026.78
3.00" 0.1625 2156725225 1,413.53 1,615.47 1,938.56 2,423.20 3,230.93 3.00" 23.40 1,026.78
3.50" 0.1896 2,063.52 2,476.23 3,095.28 4,127.04 3.50" 27.30 1,311.56
email: sales@tridentplastics.com
4.00" 0.2167 2,476.23 3,095.28 4,127.04 4.00" 31.20 1,311.56
Itemslistedwithastrikethrougharenonstocksizesand
ROUNDBAR mayrequirea500lbminimumproductionrunandaleadtimeof48weeks.
Nylonstoughness,lowcoefficientoffrictionandgoodabrasionresistancemakeitanideal
replacementforawidevarietyofmaterialsfrommetalto Applications
rubber.Itweighson1/7asmuchasbronze.Usingnylonreduceslubricationrequirements, Structuralcomponents
eliminatesgalling,corrosionandpilferageproblems,andimproves Bearings,bushings,wearpads
wearresistanceandsounddampeningcharacteristics.Nylonhasaprovenrecordofoutstanding Gears
serviceinamultitudeofpartsforsuchdiversefieldsaspaper,textiles,electronics,construction, Rollers
miningmetalworking,aircraft,foodandmaterialhandling. Electricalcomponents
Nyloniseasilyfabricatedintoprecisionpartsusingstandardmetalworkingequipment.Itsgood Jigsandfixtures
propertyprofilecombinedwithabroadsizerangeavailabilityhavemadethematerialvery
popularsincefirstintroducedin1946. Characteristics
Lowmoistureabsorption
StandardGrades/Colors:Specifications: CustomGrades:
Lowcoefficientoffriction
Nylon66NaturalFDA Natural ZytelST801
Highstrengthandstiffness
Nylon66Black ASTMD677907PA0110B54420 Zytel159L/Nylon6/12
Nylon66MDS/MoS2 Black Excellentelectricalproperties
Nylon66GF3030%Glass ASTMD677907PA0110B54220 Goodchemicalresistance
MDS Easytofabricate
ASTMD677907PA0110L01A00000
.062" 0.0026 2.38 3.33 4.76 5.72 6.67 7.62 9.15 11.43 15.24 .062" 0.37 4.84
.093" 0.0038 3.57 5.00 7.14 8.57 10.00 11.43 13.72 17.15 22.86 .093" 0.55 7.27
24" x 48"
.125" 0.0051 4.80 6.72 9.60 11.52 13.44 15.37 18.44 23.05 30.73 .125" 0.74 9.77
48" x 96"
.187" 0.0077 5.49 7.69 10.99 13.18 15.38 17.58 21.09 26.37 35.16 .187" 1.11 11.17
.250" 0.0103 10.50 14.69 20.99 25.19 29.39 33.59 40.31 50.38 67.18 .250" 1.48 21.35
.375" 0.0154 11.35 15.89 22.69 27.23 31.77 36.31 43.57 54.46 72.62 .375" 2.22 23.08
.500" 0.0206 13.54 18.95 27.07 32.49 37.90 43.32 51.98 64.98 86.63 .500" 2.97 27.53
.625" 0.0257 17.22 24.11 34.45 41.34 48.23 55.12 66.14 82.68 110.24 .625" 3.71 35.03
.750" 0.0309 21.14 29.60 42.28 50.74 59.20 67.65 81.18 101.48 135.31 .750" 4.45 43.00
.875" 0.0360 24.42 34.19 48.85 58.62 68.39 78.16 93.79 117.23 156.31 .875" 5.19 49.68
1.00" 0.0412 27.07 37.90 54.15 64.98 75.81 86.63 103.96 129.95 173.27 1.00" 5.93 55.06 12" x 12"
1.25" 0.0515 51.98 74.25 89.10 103.95 118.81 142.57 178.21 237.61 1.25" 7.41 75.51 12" x 24"
12" x 48"
1.50" 0.0618 60.24 86.06 103.27 120.48 137.69 165.23 206.54 275.39 1.50" 8.90 87.52 24" x 24"
1.75" 0.0721 109.10 130.92 152.74 174.56 209.47 261.84 349.12 1.75" 10.38 110.95 24" x 48"
2.00" 0.0824 115.38 138.45 161.53 184.61 221.53 276.91 369.21 2.00" 11.86 117.33
Contactcustomerserviceforvolumediscounts 2.50" 14.83 170.78
email: sales@tridentplastics.com
2156725225 3.00" 17.79 204.94
3.50" 20.76 239.10
4.00" 23.72 273.25
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.024 $0.38 PRICE 1.250 0.605 $5.09 PRICE 2.750 2.940 $26.16
0.312 0.037 0.48 PER 1.375 0.734 6.70 PER 3.000 3.490 33.64
0.375 0.054 0.57 LINEAR 1.500 0.873 7.41 LINEAR 3.250 4.100 42.79
0.437 0.074 0.79 FOOT 1.625 1.030 8.96 FOOT 3.500 4.750 48.97
0.500 0.097 0.84 1.750 1.190 9.02 3.750 5.460 55.80
5'&10' 5'&10'
0.562 0.122 1.25 1.875 1.360 10.83 4.000 6.210 58.90 Standard Plate Tolerance
STANDARD STANDARD
0.625 0.150 1.42 2.000 1.550 12.14 4.500 7.860 85.13 .031" - .125": +/- 10%
LENGTHS LENGTHS
0.750 0.218 2.00 2.125 1.750 16.47 5.000 9.700 107.74 .187" - 4.00" +.031"/-.00"
0.875 0.297 2.78 2.250 1.960 18.52 5.500 11.740 119.21 Round Bar Tolerance
.250" - 2.00": + .005"/-.00"
1.000 0.387 3.03 2.375 2.190 20.68 6.000 13.970 134.55
2.125" - 2.75": +.031"/-.00"
1.125 0.491 4.40 2.500 2.420 22.11 3.00" - 8.00": Plus Only
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.029 $2.23 PRICE 2.000 1.840 $53.52
0.375 0.065 3.96 PER 2.500 2.870 92.62
0.500 0.115 5.64 LINEAR 3.000 4.140 130.77
0.625 0.179 7.44 FOOT 3.500 5.630 223.39
0.750 0.259 9.45 4.000 7.350 291.79
1.000 0.460 15.62 5'&10' 4.500 9.310 369.30 Standard Plate Tolerance
1.250 0.718 20.44 STANDARD 5.000 11.500 455.90 Plus Only / As Extruded
1.500 1.030 33.70 LENGTHS 6.000 16.600 656.18 Round Bar Tolerance
1.750 1.410 47.99 Plus Only / As Extruded
CastNylonsarearangeofpolyamidesproducedbyacastingprocessinvolvingtheanionicpolymerisationofcaprolactum.Thisprocessallowsthe
productionofsemifinishedplate,rod,tubeandcustomcastingsthatarelargelyfreeofinternalstresses.NaturalCastNylonisthebasicgradefrom
whichallothergradesofCastNylonsstem.Generallyacceptedastheprimaryengineeringpolymer,NaturalCastNylonissuitableforvirtuallyany
plainbearingapplicationnottomentionahugerangeofotherapplicationsforwhichthisversatilegradefindsause.Byvaryingtheconditionsof
polymerisationthemechanicalpropertiesofCastNylonmaybealteredtosuitspecificapplicationsandtheadditionofvariousadditives,fillers,
lubricantsandcolorants.
Comparedwithextrusiongradesofpolyamide(Nylon66),CastNylonsstandoutwiththeirimprovedmechanical,thermal,andchemicalresistance
properties.Specificallythematerialhasahighertensile,compressiveandimpactstrengthaswellasanimprovedresistancetocreepandheatageing.
Thereasonsfortheseimprovedcharacteristicsarehighcrystalinityandaremarkablyhighermolecularweight.Duetolowwaterabsorption,
mechanicalpropertiesanddimensionsaremorestablemakingitsuitedforcomponentsthathavetomeetclosertolerances.CastNylonhasthe
abilitytooperateeffectivelywithouttheneedforlubricantsandhasanincreasedresistancetowearofover5timesthatforplainbearings
manufacturedfromnonferrousmetals.AsisthecasewithvirtuallyallNylonsitiseasytomachine,pleasanttoworkwithandrelativelylightweight
1/8thatofbrassmakingthehandlingandfittingoflargecomponentsmanufacturedinCastNylonarelativelyeasymatter.
StandardGrades/Colors:Specifications: CustomGrades:
Nylon6NaturalFDA Natural:ASTMD598905SPA0211 MC907
Nylon6Black/MDS MDSBlack:ASTMD598905SPA0221MC901
Nylon6HSBlue HSBlue:ASTMD598905SPA0231 NylatronGSMBlue
Nylon6Oilfilled Oilfilled:ASTMD598905SPA0251 NylatronNSM
ROUNDBAR
CustomCastNylonShapes
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
1.000 0.450 $9.08 5.000 10.600 $63.38
CastTube
1.500 1.000 12.08 5.500 12.800 73.22
OuterDiameter
2.000 1.750 12.42 6.000 15.100 87.71
from2.00"upto40.00"
2.250 2.300 13.55 6.500 18.100 101.09
Wallthicknessfrom.500"thick
2.500 2.700 15.74 7.000 21.300 124.58
2.750 3.300 19.95
PRICE 8.000 27.400 173.30 Disc&Rings
PER
3.000 3.800 24.95 9.000 34.400 205.66 OuterDiameter
LINEAR
3.250 4.800 26.81 FOOT 10.000 42.300 273.37 from10.00"upto84.00" Standard Plate Tolerance
3.500 5.300 31.02 12.000 60.300 372.49 Thickness Thickness: Plus Only
Length/Width: +.500"/-.00"
3.750 6.000 37.43 14.000 82.100 from.375"upto12.00"thick
CALL
4.000 6.900 39.58 16.000 108.000
FOR Contactcustomerservice Round Bar Tolerance
4.250 7.900 47.96 18.000 135.800 PRICE forpriceandavailabilty 1.00" - 20.000": Plus Only
4.500 8.400 47.99 20.000 167.200
ContinuouslyManufacturedAcrylic
ClearStandardSheetSizesASTMD480202CategoryB1,Finish1,TypeUVA(supercedesLP391D)
Thickness CutToSize Thickness
Lbs/SqFt 24"x48" 48"x48" 48"x72" 48"x96" 60"x96" 72"x96" 48"x120"
PerSquareFoot Range
Nominal Actual
1/16" .060" 0.37 $2.55 $17.30 $34.59 $51.89 $60.16 .054".066"
3/32" .090" 0.56 $2.91 $19.72 $39.43 $59.15 $68.58 $75.70 $90.84 $75.70 .081".099"
1/8" .118" 0.74 $3.38 $22.91 $45.82 $68.72 $79.68 $99.60 $119.52 $99.60 .112".124"
3/16" .177" 1.10 $5.07 $34.36 $68.72 $103.09 $119.52 $149.40 $179.28 $149.40 .168".186"
1/4" .220" 1.37 $6.31 $42.76 $85.52 $128.28 $148.74 $185.92 $223.10 $185.92 .209".231"
1/4" .236" 1.47 $6.76 $45.82 $91.63 $137.45 $159.36 $199.20 $239.04 $199.20 .224".248"
3/8" .354" 2.21 $10.14 $68.72 $137.45 $206.17 $239.04 $298.80 $358.56 $298.80 .336".372"
1/2" .472" 2.95 $13.52 $91.63 $183.26 $274.90 $318.72 $398.40 $478.08 $398.40 .448".496"
3/4" .708" 4.42 $22.53 $152.72 $305.44 $458.16 $531.20 .672".743"
1" .944" 5.89 $27.03 $183.26 $366.53 $549.79 $637.44 .896".991"
Forthicknessesabove1.00"(1.250"4.00")SeeCastAcrylicpricelistbelow.
CellCastAcrylic
ClearStandardSheetSizesASTMD480202CategoryA1,Finish1,TypeUVA(supercedesLP391D)
Thickness CutToSize Thickness
Lbs/SqFt 24"x48" 48"x48" 48"x72" 48"x96" 72"x96"
PerSquareFoot Range
Nominal Actual
1/16" .060" 0.37 $6.38 $43.24 $86.48 $129.72 .045".079"
1/8" .118" 0.74 $4.51 $30.54 $61.09 $91.63 $106.24 $159.36 .089"159"
3/16" .177" 1.10 $6.76 $45.82 $91.63 $137.45 $159.36 $239.04 .147".217
1/4" .236" 1.47 $7.43 $50.40 $100.80 $151.19 $175.30 $262.94 .202".282"
3/8" .354" 2.21 $11.26 $76.36 $152.72 $229.08 $265.60 $398.40 .318".418"
1/2" .472" 2.95 $15.00 $101.71 $203.42 $305.13 $353.78 $530.67 .436".546"
3/4" .708" 4.42 $22.53 $152.72 $305.44 $458.16 $531.20 $796.80 .667".797"
1" .944" 5.89 $29.28 $198.54 $397.07 $595.61 $690.56 $1,035.84 .894"1.054"
11/4" 1.250" 7.80 $49.56 $335.98 $671.97 $1,007.95 $1,168.64 $1,752.96 1.198"1.344"
11/2" 1.500" 9.36 $58.57 $397.07 $794.14 $1,191.22 $1,381.12 1.461"1.621"
2" 2.00" 12.48 $103.62 $702.51 $1,405.02 $2,107.54 $2,443.52 1.942"2.152"
21/2" 2.500" 15.60 $148.67 $1,007.95 $2,015.90 $3,023.86 $3,505.92 2.421"2.681"
3" 3.00" 18.72 $198.23 $1,343.94 $2,687.87 $4,031.81 $4,674.56 2.898"3.208"
31/2" 3.500" 21.84 $315.37 $2,138.08 $4,276.16 $6,414.24 $7,436.80 3.379"3.739" Tolerances:
4" 4.00" 24.96 $563.16 $3,818.00 $7,636.00 $11,454.00 $13,280.00 3.858"4.268" Length&Width:.125"/+.375"
GeneralPurposeUVStabilized
ClearPolycarbonateStandardSheetSizes
Thickness CutToSize Thickness
Lbs/SqFt 24"x48" 48"x48" 48"x72" 48"x96" 60"x96" 72"x96" 48"x120"
PerSquareFoot Range
Nominal Actual
1/32" .030" 0.19 $2.04 $13.84 $27.67 $41.51 $48.13 .027".033"
.040" 0.25 $2.30 $15.57 $31.13 $46.70 $54.14 .036".046"
1/16" .060" 0.37 $2.55 $17.30 $34.59 $51.89 $60.16 .054".066"
.080" 0.50 $3.83 $25.94 $51.89 $77.83 $90.24 .072".088"
3/32" .090" 0.56 $3.83 $25.94 $51.89 $77.83 $90.24 .081".099"
1/8" .118" 0.74 $3.72 $25.20 $50.40 $75.60 $87.65 $109.56 $131.47 $109.56 .112".124"
3/16" .177" 1.10 $5.59 $37.87 $75.75 $113.62 $131.74 $164.67 $197.61 $164.67 .168".186"
1/4" .220" 1.37 $6.94 $47.04 $94.08 $141.11 $163.61 $204.51 $245.41 $204.51 .209".231"
1/4" .236" 1.47 $7.43 $50.40 $100.80 $151.19 $175.30 $219.12 $262.94 $219.12 .224".248"
5/16" .315" 1.95 $20.08 $136.16 $272.32 $408.48 $473.60 .312".343"
3/8" .375" 2.34 $13.52 $91.63 $183.26 $274.90 $318.72 $398.40 $478.08 $398.40 .336".394"
1/2" .500" 3.12 $18.02 $122.18 $244.35 $366.53 $424.96 $531.20 $637.44 $531.20 .448".525"
Forthicknessesabove.500"(.625"2.00")SeeTrizodOPpricelist.
GeneralPurposeUVStabilizedColors
PolycarbonateStandardSheetSizes StandardColors:BlackWhiteSolarBronzeSolarGray
Thickness CutToSize Thickness
Lbs/SqFt 24"x48" 48"x48" 48"x72" 48"x96"
PerSquareFoot Range Tolerances:
Nominal Actual
Length&Width:.125"/+.375"
1/16" .060" 0.37 $4.21 $28.54 $57.08 $85.62 $99.26 .054".066"
1/8" .118" 0.74 $6.76 $45.82 $91.63 $137.45 $159.36 .112".124" ReclingFilmMasked
3/16" .177" 1.10 $8.56 $58.03 $116.07 $174.10 $201.86 .168".186" ASTMD3935PC0136
CIDAA59502typeI,classI
1/4" .236" 1.47 $11.26 $76.36 $152.72 $229.08 $265.60 .224".248"
(SupercedingMILP46144C)
3/8" .375" 2.34 $20.27 $137.45 $274.90 $412.34 $478.08 .336".394" UL94HBListed
1/2" .500" 3.12 $27.03 $183.26 $366.53 $549.79 $637.44 .448".525" UVstabilized
AbrasionResistant/UVResistantCoated2Sides
AR2ClearPolycarbonateStandardSheetSizes CIDAA59502typeIV,classI(SupercedingMILP46144C)
AbrasionResistant/UVResistantCoated2SidesTransparentColors
AR2SolarGray&BronzePolycarbonateStandardSheetSizes CIDAA59502typeIV,classI(SupercedingMILP46144C)
Thickness CutToSize Thickness
Lbs/SqFt 24"x48" 48"x48" 48"x72" 48"x96"
PerSquareFoot Range
Nominal Actual
1/8" .118" 0.74 $18.02 $122.18 $244.35 $366.53 $424.96 .112".124"
3/16" .177" 1.10 $22.53 $152.72 $305.44 $458.16 $531.20 .168".186"
1/4" .236" 1.47 $24.78 $167.99 $335.98 $503.98 $584.32 .224".248"
3/8" .375" 2.34 $45.05 $305.44 $610.88 $916.32 $1,062.40 .336".394"
1/2" .500" 3.12 $56.32 $381.80 $763.60 $1,145.40 $1,328.00 .448".525"
ElectrostaticDissipativeCoated2Sides
ESDClearPolycarbonateStandardSheetSizes
Thickness CutToSize Thickness
Lbs/SqFt 24"x48" 48"x48" 48"x72" 48"x96"
PerSquareFoot Range
Nominal Actual
1/8" .118" 0.74 $22.53 $152.72 $305.44 $458.16 $531.20 .112".124"
3/16" .177" 1.10 $27.03 $183.26 $366.53 $549.79 $637.44 .168".186"
1/4" .236" 1.47 $33.79 $229.08 $458.16 $687.24 $796.80 .224".248"
Tolerances:
3/8" .375" 2.34 $45.05 $305.44 $610.88 $916.32 $1,062.40 .336".394"
Length&Width:.125"/+.375"
1/2" .500" 3.12 $56.32 $381.80 $763.60 $1,145.40 $1,328.00 .448".525"
Applications
TrizodOPOpticalGradePolycarbonateSheetisatransparentamorphous Windows
thermoplasticwithexcellentdimensionalstabilityandgoodstrengthandstiffnessover Siteglasses
awiderangeoftemperatures.Trizodpolycarbonateoffersveryhighimpactstrength, Machineguards
highmodulusofelasticityanda270F(132C)heatdeflectiontemperatureat264psi. Manifolds
TrizodOPhasanopticallyclearpresspolishfinishprotectedbyaheavydutyadhesive Instrumentcomponents
polyethylenefilmmasking.TrizodOPisUVstabilizedandmeetstherequirementsof Housings&Covers
ASTMD3935PC0136.TrizodOPiscertifiedandlistedwithUnderwritersLaboratories
Characteristics
underUL94V0forflammabilityinthicknessesabove.236"/6mm.
Excellentimpactresistance
StandardGrades/Colors:Specifications: CustomGrades: Excellentdimensionalstability
ClearPolishedFinish ASTMD3935PC0136 ESDElectrostaticdissipative Goodelectricalproperties
UVstabilized Abrasionresistant Easytofabricate
ULflamerated
StandardSheetSizes
CutToSize Thickness
Thickness Lbs/SqFt 24"x48" 48"x48" 48"x72" 48"x96"
PerSquareFoot Range
.250" 1.72 $29.36 $223.24 $446.47 $597.09 $723.66 .250".288"
.312" 1.95 $36.62 $248.28 $556.96 $744.85 $903.16 .312".343"
.375" 2.34 $12.05 $91.63 $183.26 $245.09 $284.16 .336".394"
.500" 3.12 $16.07 $122.18 $244.35 $326.78 $378.88 .448".525"
.625" 4.42 $119.18 $808.02 $1,812.59 $2,424.07 $2,810.63 .625".708"
.750" 5.15 $130.86 $887.18 $1,990.15 $2,661.53 $3,168.67 .750".866"
.875" 5.89 $160.09 $1,085.38 $2,434.77 $3,256.13 $3,946.64 .875".990"
1.00" 6.86 $170.30 $1,154.56 $2,589.95 $3,463.67 $4,198.80 1.00"1.120"
1.25" 8.84 $218.09 $1,478.58 $3,316.82 $4,435.75 $5,376.76 1.250"1.404"
1.50" 10.31 $253.93 $1,721.54 $3,861.83 $5,164.62 $6,260.10 1.500"1.692"
1.75" 11.78 $308.21 $2,089.56 $4,687.38 $6,268.67 $7,598.15 1.750"1.925"
2.00" 13.73 $329.37 $2,233.03 $5,009.23 $6,699.09 $8,119.87 2.00"2.200"
PrecisionRoutedDiscs
Diameter Diameter Diameter Diameter Diameter Thickness
Thickness Lbs/SqFt
6.00"to11.00" 12.00"to15.00" 16.00"to23.00" 24.00"to35.00" 36"to48" Range
.250" 1.72 $83.73 $229.93 $327.40 $634.79 $829.72 .250".288"
.312" 1.95 $95.79 $293.17 $414.76 $804.51 $1,072.68 .312".343"
.375" 2.34 $55.00 $130.01 $170.02 $315.04 $420.05 .336".394"
.500" 3.12 $61.67 $156.68 $210.03 $395.05 $526.74 .448".525"
.625" 4.42 $272.84 $866.38 $1,262.07 $2,474.13 $3,290.51 .625".708"
.750" 5.15 $317.23 $968.90 $1,403.35 $2,731.70 $3,625.60 .750".866"
1.00" 6.86 $407.69 $1,255.77 $1,821.16 $3,542.32 $4,698.09 1.00"1.120" OpticallyClearPolishedFinish
1.25" 8.84 $512.03 $1,598.13 $2,322.19 $4,519.38 $5,992.50 1.250"1.404" Annealed/StressRelieved
1.50" 10.31 $596.52 $1,861.08 $2,704.12 $5,258.23 $6,994.31 1.500"1.692" HeavyDutyPEFilmMasked
1.75" 11.78 $711.63 $2,246.51 $3,269.77 $6,389.53 $8,486.05 1.750"1.925" ASTMD3935PC0136
2.00" 13.73 $796.76 $2,437.03 $3,530.54 $6,911.09 $9,148.11 2.00"2.200" UL94V0Listed
Diametertolerance +/.010" +/.010" +/.010" +/.010" +/.015" UVstabilized
TrizodisaregisteredtrademarkofTridentEngineeringPlasticsInc.
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.026 $0.67 PRICE 1.500 0.919 $14.42 PRICE 4.000 6.534 $102.20
0.312 0.040 0.88 PER 1.625 1.078 -- PER 4.250 7.376 --
0.375 0.057 1.01 LINEAR 1.750 1.251 19.60 LINEAR 4.500 8.270 129.12
0.437 0.078 -- FOOT 1.875 1.436 -- FOOT 5.000 10.210 159.91
0.500 0.102 1.76 2.000 1.634 25.26 5.500 12.354 197.18
5'&10' 5'&10'
0.562 0.129 -- 2.125 1.844 -- 6.000 14.702 252.45
STANDARD STANDARD
0.625 0.160 2.74 2.250 2.067 32.48 6.500 17.254 364.49
LENGTHS LENGTHS
0.750 0.230 3.92 2.500 2.552 39.92 7.000 20.011 462.38 Standard Plate Tolerance
0.875 0.313 5.21 CUSTOM 2.750 3.088 49.30 CUSTOM 8.000 26.137 605.29 Thickness: Plus Only
1.000 0.408 6.26 3.000 3.675 57.71 9.000 33.079 868.71 Length/Width: +.500"/-.00"
SIZES SIZES
1.125 0.517 8.42 AVAILABLE 3.250 4.314 -- AVAILABLE 10.000 40.839 -- Round Bar Tolerance
ON ON .250" - 2.00": + .005"/-.00"
1.250 0.638 9.86 3.500 5.003 78.15 12.000 58.807 --
REQUEST REQUEST 2.125" - 2.75": +.031"/-.00"
1.375 0.772 13.23 3.750 5.743 -- 14.000 80.044 -- 3.00" - 14.000": Plus Only
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.026 $1.74 PRICE 1.500 0.919 $49.43 PRICE 4.000 6.534 $351.03
0.312 0.040 -- PER 1.625 1.078 -- PER 4.250 7.376 --
0.375 0.057 3.37 LINEAR 1.750 1.251 67.50 LINEAR 4.500 8.270 452.03
0.437 0.078 -- FOOT 1.875 1.436 -- FOOT 5.000 10.210 561.58
0.500 0.102 5.69 2.000 1.634 87.85 5.500 12.354 678.89
4'&8' 4'&8'
0.562 0.129 -- 2.125 1.844 -- 6.000 14.702 807.32
STANDARD STANDARD
0.625 0.160 8.70 2.250 2.067 110.87
LENGTHS LENGTHS
0.750 0.230 12.38 2.500 2.552 137.09 Othergradesavailable:
0.875 0.313 17.06 CUSTOM 2.750 3.088 -- CUSTOM LEXAN500R10%Glassreinforced Standard Plate Tolerance
1.000 0.408 22.34 SIZES 3.000 3.675 198.26 SIZES LEXAN3413R30%Glassreinforced Thickness: Plus Only
1.125 0.517 28.11 AVAILABLE 3.250 4.314 -- AVAILABLE LEXAN3414R40%Glassreinforced Length/Width: +.500"/-.00"
ON ON Callforpriceandavailability
1.250 0.638 34.56 3.500 5.003 269.23 Round Bar Tolerance
REQUEST REQUEST Plus Only
1.375 0.772 41.68 3.750 5.743 --
Fluoropolymersareplasticsbasedonpolymerscontainingoneormoreatomsoffluorine,orcopolymerswith
thefluorinecontainingmonomerbeinginthegreatestamountbymass.Becauseoftheelectronegativityof
fluorine,fluoropolymersinherentlydonotbondreadilywithothermaterials,thistraitisusuallyreferredtoas
nonstick.Fluoropolymersarealargefamilyofsemicrystallinematerialsthathaveoutstandingchemical
inertness,hightemperatureresistance,andlowfriction.Dielectricpropertiesareexcellentandstableovera
widetemperatureandfrequencyrange;allfluoropolymersareinherentlyflameretardant.TheFluoropolymer
familyincludesPolytetrafluoroethylene(PTFE)alsoknownasTeflon,Polychlorotrifluoroethylene(PCTFE)also
knownasKelForNeoflon,EthyleneTetrafluoroethyleneCopolymer(ETFE)alsoknownasTefzel,
Perfluoroalkoxy(PFA),FluorinatedEthylenePropylene(FEP),PolyvinylideneFluoride(PVDF)alsoknownas
KynarandChlorotrifluoroethylene(ECTFE)alsoknownasHalar.
Shapes&Sizes
Fluoropolymer TradeNames Extruded Extruded Molded Extruded Molded Extruded Molded
Film Sheet Sheet Rod Rod Tube Tube
KYNARPVDF/PolyVinylDeneFluorideoffersexcellentcorrosionandchemical Applications
resistanceatbothambientandelevatedtemperatures(upto275F).PVDFisalso SemiconductorProcessEquipment
inherentlyUVstable,mechanicallytough,abrasionandflameresistant.KYNAR740 ChemicalStorage/FluidHandling
andKYNAR1000HDarehighlychemicallyresistantfluoropolymersusedinpiping, FireSafeComponentry
tubing,vesselfabrication,machinedvalvesandfittings,nozzlesandotheritemsfor Pump&ValveComponents
corrosivefluidhandling.Theirinherentchemicalresistanceandhighpuritymake DIWaterSystems
themidealforapplicationincontactwithhighpuritywater,acids,chlorine, Tanks&TankLinings
halogenatedsolventsandpetrochemicalmixtures.
Characteristics
Specifications/AgencyRatings SuperiorChemicalResistance
FM4910listed CustomGrades: LowMoistureAbsorption
FDA21CFR177.1520USPClassVIRated KYNAR1000HD HighPurity
FDA21CFR177.2510ASTMD322205TypeII(resinspec) KYNARFlex Fireresistant/FlameRatedUL94V0
FDA21CFR177.2600ASTMD671301(shapespec) ExcellentMechanicalProperties
USDAFoodContact UL94V0Listed UVandGammaRadiationStability
NSF51NSF61
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.041 $2.24 PRICE 1.500 1.440 $68.54 PRICE 4.000 10.720 $508.45
0.312 0.070 -- PER 1.625 1.690 -- PER 4.250 12.700 --
0.375 0.090 4.73 LINEAR 1.750 1.960 94.71 LINEAR 4.500 13.560 643.05
0.437 0.130 -- FOOT 1.875 2.250 -- FOOT 5.000 16.740 795.09
0.500 0.160 8.10 2.000 2.560 121.63 5.500 20.260 972.05
5'&10' 5'&10'
0.562 0.210 -- 2.125 2.890 -- 6.000 24.110 1,161.48
STANDARD STANDARD
0.625 0.250 12.47 2.250 3.240 -- 6.500 28.290
LENGTHS LENGTHS
0.750 0.360 17.20 2.500 4.000 191.93 7.000 32.810 CALL Standard Plate Tolerance
0.875 0.490 23.68 2.750 4.840 -- 8.000 42.850 FOR Thickness: +/- 10%
CUSTOM CUSTOM
1.000 0.640 30.54 3.000 5.760 276.68 9.000 54.230 PRICE Length/Width: +.500"/-.00"
SIZES SIZES
1.125 0.810 42.38 AVAILABLE 3.250 6.750 -- AVAILABLE 10.000 66.960 Round Bar Tolerance
ON ON .250" - 2.00": + .005"/-.00"
1.250 1.000 47.72 3.500 8.210 388.82 12.000 96.440 --
REQUEST REQUEST 2.125" - 2.75": +.031"/-.00"
1.375 1.210 -- 3.750 9.820 -- 14.000 131.240 -- 3.00" - 14.000": Plus Only
HALARECTFE/EthyleneChloroTriFluoroEthyleneisastrong,highlyimpact Applications
resistant,meltprocessiblecopolymerthatretainsitsusefulpropertiesoverabroad SemiconductorProcessEquipment
ChemicalStorage/FluidHandling
rangeoftemperatures(cryogenicupto300F).ECTFEexhibitsexcellentelectrical
FireSafeComponentry
properties,lowmoistureabsorption,andtemperatureinsensitivity,makingita
Pump&ValveComponents
materialofchoiceforplenumratedwireandcablejacketing.ECTFEisdistinguished DIWaterSystems
fromotherfluoropolymersbyitsexceptionalsurfacesmoothness.Inadditionto Tanks&TankLinings
electricalcomponents,ECTFEworkswellforhighpurityprocessingcomponentsfor
thechemicalandsemiconductorindustries.ECTFEsrelativecostfactorversusPTFE Characteristics
isapproximately2.25to1. SuperiorChemicalResistance
LowMoistureAbsorption
Specifications/AgencyRatings HighPurity
FM4910listed Fireresistant/FlameRatedUL94V0
FDACompliant USPClassVIRated ExcellentMechanicalProperties
UL94V0Listed Easilyweldsandthermoforms
2.250" 19.67
2.50" 21.85
12" x 12"
Contactcustomerserviceforvolumediscounts 3.00" 26.22
CALL 12" x 48"
2156725225 3.250" 28.41 24" x 24"
Custom Thickness Planing/Grinding
$250 Set Up 3.50" 30.59
Plus $2.00 Per Square Foot email: sales@tridentplastics.com
4.00" 34.96
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.036 $6.85 PRICE 1.500 1.305 $93.43 PRICE 4.000 9.278 $572.93
0.312 0.055 -- PER 1.625 1.502 -- PER 4.250 10.277 --
0.375 0.080 11.33 LINEAR 1.750 1.742 135.73 LINEAR 4.500 11.522 --
0.437 0.109 -- FOOT 1.875 2.000 -- FOOT 5.000 14.224 1,163.48
0.500 0.142 14.75 2.000 2.276 166.41 5.500 17.211 Standard Plate Tolerance
5'&10' 5'&10'
0.562 0.180 -- 2.125 2.569 -- 6.000 20.483 Thickness: +/- 10%
STANDARD STANDARD Length/Width: +.500"/-.00"
0.625 0.222 30.87 2.250 2.880 212.44 6.500 24.039
LENGTHS LENGTHS Call
0.750 0.320 27.14 2.500 3.556 255.62 7.000 27.879 for
Round Bar Tolerance
0.875 0.436 -- 2.750 4.303 -- 8.000 36.414 price
CUSTOM CUSTOM Plus Only
1.000 0.569 41.60 3.000 5.121 371.97 9.000 46.086 and
SIZES SIZES
availability
1.125 0.720 -- AVAILABLE 3.250 6.010 -- AVAILABLE 10.000 56.897 Custom Thickness Planing/Grinding
1.250 0.889 65.49 ON 3.500 6.970 -- ON 12.000 81.931 $250 Set Up
REQUEST REQUEST Plus $2.00 Per Square Foot
1.375 1.076 -- 3.750 8.001 -- 14.000 111.518
TypicalcharacteristicsofNORYLincludeexcellentdimensionalstability,lowmoldshrinkage,lowwaterabsorptionandvery
lowcreepbehavioratelevatedtemperatures.Thesepropertiescombinedwithanoutstandinghydrolyticstabilityinhotand Applications
coldwater,makeNORYLanexcellentpotentialcandidateforfluidengineeringapplications. Manifolds
AnotheroutstandingfeatureofNORYLisitsretentionoftensileandflexuralstrength,evenatelevatedtemperatures.The Pump&ValveApplications
InstrumentComponents
gradualreductioninmodulusastemperatureisincreased,isakeyadvantageofthismaterial.Asaresult,partsfabricated
Housings&Covers
fromNORYLshapesmaybeusedwithpredictableperformanceoverawidetemperaturerange.Anotherimportant
Characteristics
advantageofNORYLisitspredictablylowcreepbehavior,evenatelevatedtemperatures. ExcellentDimensionalStability
NORYLexhibitsexcellentelectricalproperties,whichremainstableoverawiderangeoftemperature,humidityand LowMoistureAbsorption
frequencyvariations.Thisstability,togetherwithafinetunedbalanceofthermalandimpactproperties,makesNORYLan Strength&Stiffnessoverwide
excellentpotentialcandidatefordemandingelectricalandelectronicapplications,includingelectricalinsulators. temperaturerange
AllflameretardantNORYLresinsaredesignedwithnonbrominatedandnonchlorinatedflameretardantsystems.
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.022 $0.82 PRICE 1.500 0.805 $18.60 PRICE 4.000 5.727 $132.61
0.312 0.035 -- PER 1.625 0.945 22.32 PER 4.250 6.464 --
0.375 0.050 1.23 LINEAR 1.750 1.096 25.41 LINEAR 4.500 7.249 168.54
0.437 0.068 -- FOOT 1.875 1.258 -- FOOT 5.000 8.949 208.19
0.500 0.089 2.08 2.000 1.432 32.96 5.500 10.828 252.81
5'&10' 5'&10'
0.562 0.113 -- 2.125 1.616 -- 6.000 12.887 299.91 Standard Plate Tolerance
STANDARD STANDARD
0.625 0.140 3.21 2.250 1.812 42.15 6.500 15.124 351.95 Thickness: Plus Only
LENGTHS LENGTHS
0.750 0.201 4.64 2.500 2.237 52.06 7.000 17.540 408.97 Length/Width: +.500"/-.00"
.250" 0.0118 20.91 29.27 41.81 50.18 58.54 66.90 83.63 100.35 133.80 .250" 1.70 42.52
.375" 0.0177 29.28 40.99 58.56 70.27 81.99 93.70 117.12 140.55 187.40 .375" 2.55 59.55
.500" 0.0236 37.66 52.73 75.32 90.39 105.45 120.52 150.65 180.77 241.03 .500" 3.41 76.60
.625" 0.0296 46.04 64.45 92.07 110.49 128.90 147.31 184.14 220.97 294.63 .625" 4.26 93.63
12" x 12"
.750" 0.0355 54.41 76.17 108.82 130.59 152.35 174.11 217.64 261.17 348.23 .750" 5.11 110.67 12" x 48"
1.00" 0.0473 71.17 99.63 142.33 170.80 199.26 227.73 284.66 341.59 455.46 1.00" 6.81 144.74 24" x 24"
24" x 48"
1.25" 0.0591 128.99 184.27 221.13 257.98 294.84 368.55 442.26 589.68 1.25" 8.51 187.40 48" x 48"
1.50" 0.0709 163.79 233.99 280.78 327.58 374.38 467.97 561.57 748.76 1.50" 10.22 237.95 48" x 72"
48" x 96"
1.75" 0.0828 269.99 323.99 377.98 431.98 539.98 647.97 863.96 1.75" 11.92 274.56
2.00" 0.0946 305.99 367.19 428.38 489.58 611.98 734.37 979.16 2.00" 13.62 311.17
2.250" 0.1064 438.80 511.93 585.06 731.33 877.60 1,170.13 2.250" 15.32 371.86
2.50" 0.1182 484.99 565.82 646.65 808.31 969.98 1,293.30 2.50" 17.03 411.01
2.750" 0.1301 Contactcustomerserviceforvolumediscounts 619.71 708.24 885.30 1,062.36 1,416.48 2.750" 18.73 450.15
12" x 12"
3.00" 0.1419 2156725225 717.22 819.68 1,024.60 1,229.52 1,639.36 3.00" 20.43 520.98 12" x 48"
3.50" 0.1655 1,153.28 1,441.60 1,729.92 2,306.55 3.50" 23.84 733.01 24" x 24"
email: sales@tridentplastics.com 24" x 48"
4.00" 0.1892 1,792.95 2,151.54 2,868.72 4.00" 27.24 911.67
Itemslistedwithastrikethrougharenonstocksizes
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks.
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.030 $2.62 PRICE 1.500 1.040 $31.88 PRICE 4.000 7.400 $231.52
0.312 0.045 -- PER 1.625 1.220 -- PER 4.250 8.370 --
0.375 0.065 2.45 LINEAR 1.750 1.420 44.15 LINEAR 4.500 9.380 292.34
0.437 0.089 -- FOOT 1.875 1.630 -- FOOT 5.000 11.600 362.97
0.500 0.115 3.92 2.000 1.850 56.90 5.500 14.000 490.50
5'&10' 5'&10'
0.562 0.146 8.72 2.125 2.090 76.30 6.000 16.700 529.74 Standard Plate Tolerance
STANDARD STANDARD
0.625 0.234 5.69 2.250 2.350 80.66 6.500 19.400 -- Thickness: Plus Only
LENGTHS LENGTHS
0.750 0.260 8.14 2.500 2.900 90.25 7.000 22.700 -- Length/Width: +.500"/-.00"
ERTALYTEPETisanunreinforced,semicrystallinethermoplasticpolyesterbasedonpolyethyleneterephthalate
(PET).Itischaracterizedashavingthebestdimensionalstabilitycoupledwithexcellentwearresistance,alow Performsforbothwetanddry
coefficientoffriction,highstrength,andresistancetomoderatelyacidicsolutions.ERTALYTEspropertiesmake environments
itespeciallysuitableforthemanufactureofprecisionmechanicalpartswhicharecapableofsustaininghighloadsand Highstrengthandrigidity
enduringwearconditions.ERTALYTEscontinuousservicetemperatureis210Fanditsmeltingpointisalmost150F Excellentstainresistance
higherthanAcetal.Itretainssignificantlymoreofitsoriginalstrengthupto180FthanNylonorAcetal.Inaddition, Goodwearresistance
ERTALYTEPEToffersgoodchemicalandabrasionresistance.Itslowmoistureabsorptionenablesmechanicalandelectrical Excellentdimensionalstability
propertiestoremainvirtuallyunaffectedbymoisture.ERTALYTEPETcanbemachinedtoprecisedetailonstandardmetal
workingequipment.
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.029 $0.45 PRICE 1.250 0.729 $6.94 PRICE 2.750 4.580 $31.66
0.312 0.045 -- PER 1.375 0.882 9.14 PER 3.000 5.410 37.61
0.375 0.066 0.72 LINEAR 1.500 1.050 9.92 LINEAR 3.250 6.400 66.06
0.437 0.089 -- FOOT 1.625 1.230 13.46 FOOT 3.500 7.420 59.59 Standard Plate Tolerance
0.500 0.117 1.23 1.750 1.430 13.46 3.750 8.520 68.33 Plus Only
5'&10' 5'&10'
0.562 0.148 -- 1.875 1.640 -- 4.000 9.800 72.13 Custom Thickness Planing/Grinding
STANDARD STANDARD
0.625 0.182 1.88 2.000 2.420 17.52 4.500 12.300 112.22 $250 Set Up
LENGTHS LENGTHS
0.750 0.262 2.56 2.125 2.740 -- 5.000 15.200 138.39 Plus $2.00 Per Square Foot
0.875 0.357 3.46 2.250 3.090 24.11 5.500 18.300 167.30 Round Bar Tolerance
.250" - 2.00": + .005"/-.00"
1.000 0.466 4.49 2.375 3.420 26.20 6.000 21.800 198.94
2.125" - 2.75": +.031"/-.00"
1.125 0.590 6.17 2.500 3.790 26.20 8.000 38.800 call for $ 3.00" - 8.00": Plus Only
TheadditionofglassfiberssignificantlyreducestheexpansionrateandincreasestheflexuralmodulusofPEEK.Thisgradeis
PrimarySpecifications:
idealforstructuralapplicationsthatrequireimprovedstrengthandstiffness,especiallyattemperaturesabove300F. PEEK450GMILP46183
TheadditionofcarbonfibersenhancesthecompressivestrengthandstiffnessofPEEK,anddramaticallylowersits ASTMD6262SPAEK0111
FDAcompliant
expansionrate.ItoffersdesignersoptimumwearresistanceandloadcarryingcapabilityinaPEEKbasedproduct.Thisgrade
providesmorethermalconductivitythanunreinforcedPEEKincreasingheatdissipationfrombearingsurfacesimproving
bearinglifeandcapability.
BearinggradePEEKwithCarbonfiberreinforced,graphiteandPTFElubricants,offersthelowestcoefficientoffrictionand
thebestmachinabilityforallPEEKgrades.Anexcellentcombinationoflowfriction,lowwear,highLPV,lowmatingpart
ChemicalResistance
wearandeasymachining,makeitidealforaggressiveservicebearings.
PEEK450G
Acetone Resistant
Properties English InternationalSI Ammoniasolution10% Resistant
PEEK450G Unit NominalValue Unit NominalValue TestMethod Benzene Resistant
Density lb/in3 0.047 g/cm3 1.300 ISO1183 Boricacid,10% Limitedresistance
WaterAbsorption,73F24hr % 0.07 % 0.07 ISO62 Dieseloil Resistant
TensileStrength(Yield) psi 14500 Mpa 100 ISO5272 Ethanol,96% Resistant
TensileModulus73F psi 537000 Mpa 3705 ISO5272 Formaldehyde,aqueoussolution30% Resistant
FlexuralModulus73F psi 595000 Mpa 4106 ISO178 Formicacid10% Limitedresistance
FlexuralStrength73F psi 23900 Mpa 165 ISO178 Glycerin Resistant
FlexuralStrength257F psi 12300 Mpa 85 ISO178 Glycol Resistant
FlexuralStrength347F psi 2610 Mpa 18 ISO178 Hydrochloricacid,aqueoussolution36% Resistant
FlexuralStrength527F psi 1890 Mpa 13 ISO178 Hydrofluoricacid,40% Notresistant
CompressiveStress73F psi 18100 Mpa 125 ISO604 Isopropanol Resistant
CompressiveStress248F psi 10200 Mpa 70 ISO604 Methanol Resistant
IzodImpact(notched)73F ftlb/inch 3.6 J/m 192 ISO180/A Methylenechloride Resistant
IzodImpact(unnotched)73F ftlb/inch nobreak J/m nobreak ISO180/A Nitricacid,aqueoussolution10% Resistant
Coefficientoffriction,dynamic 0.40 0.40 PTM55007 Nitricacid,aqueoussolution50% Limitedresistance
Hardness ShoreD 85 ShoreD 85 ISO868 Phosphoricacid50% Resistant
DeflectionTemperature264psi F 306 C 152.34 ISO752/A Sulphuricacid,aqueoussolution2% Limitedresistance
MeltingTemperature F 649 C 343.05 ISO113573 Sulphuricacid,concentrated98% Notresistant
DielectricStrength,.078"(2mm) V/mil 580 kV/mm 23 IEC602431 Trichloroethylene Resistant
FlammabilityRating .059" V0 1.5mm V0 UL94 Triethanolomine Limitedresistance
*Thisinformationisbasedonaverageresinvaluespecificationsandisonlytoassistandadviseyouonthecurrenttechnicalknowledge,itisgivenwithoutobligationsorliability.
.040" 0.0019 $8.97 $12.55 $17.93 $21.52 $25.10 $28.69 $34.43 $43.04 $46.62 .040" 0.27 $72.94
STANDARD
.062" 0.0029 12.70 17.78 25.40 30.48 35.57 40.65 48.78 60.97 66.05 .062" 0.42 103.34
SIZES
.125" 0.0059 25.59 35.83 51.19 61.43 71.66 81.90 98.28 122.85 133.09 .125" 0.85 208.23
.187" 0.0088 38.11 53.35 76.21 91.45 106.70 121.94 146.33 182.91 198.15 .187" 1.26 310.02
.250" 0.0117 28.42 39.79 56.85 68.22 79.58 90.95 102.32 125.06 136.43 .250" 1.69 231.24
.375" 0.0176 40.27 56.38 80.54 96.64 112.75 128.86 144.97 177.18 193.29 .375" 2.54 327.61 12" x 12"
12" x 24"
.500" 0.0235 52.11 72.96 104.23 125.07 145.92 166.76 187.61 229.30 250.14 .500" 3.38 423.97 12" x 36"
.625" 0.0293 63.96 89.54 127.91 153.50 179.08 204.66 230.24 281.41 306.99 .625" 4.23 520.33 12" x 48"
24" x 24"
.750" 0.0352 75.80 106.12 151.60 181.92 212.25 242.57 272.89 333.53 363.85 .750" 5.07 616.69
24" x 36"
1.00" 0.0469 99.49 139.28 198.97 238.77 278.56 318.35 358.15 437.74 477.53 1.00" 6.76 809.37 24" x 48"
1.25" 0.0587 123.17 172.44 246.35 295.62 344.89 394.16 443.43 541.96 551.15 1.25" 8.45 1,002.09
1.50" 0.0704 205.61 293.73 352.47 411.22 469.96 528.71 646.20 657.15 1.50" 10.14 1,194.82
1.75" 0.0822 341.09 409.31 477.53 545.75 613.97 750.41 818.62 1.75" 11.83 1,387.50
2.00" 0.0939 388.47 466.17 543.86 621.56 699.25 854.64 932.33 2.00" 13.52 1,580.23 Metric
sizes
ContactcustomerserviceforvolumediscountsOthergradesavailablecallforpriceandavailability: 2.50" 16.90 1,965.62
available
2156725225 PEEK450GL3030%Glassfilled 3.00" 20.28 2,351.03 onrequest
email: sales@tridentplastics.com PEEK450CA3030%CarbonFiberfilled 4.00" 27.04 3,121.89
Itemslistedwithastrikethrougharenonstocksizes
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks.
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.028 $3.13 PRICE 1.500 0.996 $105.77 PRICE 4.000 7.080 $758.20
0.312 0.043 -- PER 1.625 1.170 124.55 PER 4.250 7.990 --
0.375 0.062 6.72 LINEAR 1.750 1.360 143.32 LINEAR 4.500 8.960 995.90
0.437 0.085 -- FOOT 1.875 1.560 -- FOOT 5.000 11.100 1,229.47
0.500 0.111 11.80 2.000 1.770 185.29 6.000 15.700 1,770.46
5'&10' 5'&10'
0.562 0.140 15.20 2.125 2.000 -- StandardPlateTolerance
STANDARD STANDARD
0.625 0.173 18.54 2.250 2.240 243.24 BlackPEEK450Gavailableinsomesizes Thickness:PlusOnly
LENGTHS LENGTHS
0.750 0.249 26.68 2.500 2.770 301.23 Othergradesavailable Length/Width:+.250"/.00"
PEEK450GL30
0.875 0.339 36.43 CUSTOM 2.750 3.530 359.74 CUSTOM 30%Glassfilled
1.000 0.443 45.08 SIZES 3.000 3.980 418.25 SIZES RoundBarTolerance
PEEK450CA30
AVAILABLE AVAILABLE .250"2.00":+.005"/.00"
1.125 0.560 60.46 3.250 4.680 499.30 30%CarbonFiberfilled 2.125"2.50":+.031"/.00"
1.250 0.692 74.63 ON 3.500 5.420 580.30 ON Callforpriceandavailability 2.750"5.00":PlusOnly
REQUEST REQUEST
1.375 0.837 90.20 3.750 6.220 --
.250" 0.0135 43.00 60.20 86.00 103.20 120.40 137.60 172.00 206.40 275.20 .250" 1.95 349.83
STANDARD
.375" 0.0203 60.92 85.28 121.83 146.20 170.57 194.93 243.67 292.40 389.87 .375" 2.93 495.60
SIZES
.500" 0.0271 78.83 110.37 157.67 189.20 220.73 252.27 315.33 378.40 504.53 .500" 3.90 641.35
.625" 0.0339 96.75 135.46 193.51 232.21 270.91 309.61 387.01 464.42 619.22 .625" 4.88 787.15
.750" 0.0406 114.67 160.54 229.34 275.21 321.08 366.95 458.68 550.42 733.89 .750" 5.85 932.91
1.00" 0.0542 150.50 210.70 301.00 361.20 421.39 481.59 601.99 722.39 963.19 1.00" 7.80 1,224.39 12"x12"
12"x24"
1.25" 0.0677 186.33 260.86 372.66 447.19 521.73 596.26 745.32 894.39 1,192.52 1.25" 9.75 1,515.91
12"x36"
1.50" 0.0813 311.03 444.32 533.19 622.05 710.92 888.65 1,066.38 1,421.84 1.50" 11.70 1,807.42 12"x48"
1.75" 0.0948 515.99 619.19 722.39 825.58 1,031.98 1,238.37 1,651.17 1.75" 13.65 2,098.94
2.00" 0.1083 587.65 705.19 822.72 940.25 1,175.31 1,410.37 1,880.50 2.00" 15.60 2,390.46
Contactcustomerserviceforvolumediscounts
BlackPEEK450GL30availableinsomesizes
2156725225
Callforpriceandavailability
email: sales@tridentplastics.com
Itemslistedwithastrikethrougharenonstocksizes
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks.
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.032 $4.08 PRICE 1.500 1.150 $137.52 PRICE 4.000 8.170 $985.66
0.312 0.050 -- PER 1.625 1.350 161.91 PER 4.250 9.240 --
0.375 0.072 8.76 LINEAR 1.750 1.560 186.34 LINEAR 4.500 10.360 1,294.67
0.437 0.098 -- FOOT 1.875 1.800 -- FOOT 5.000 12.760 1,598.33
0.500 0.128 15.37 2.000 2.040 240.86 6.000 15.700 0.00
5'&10' 5'&10'
0.562 0.162 19.76 2.125 2.310 -- StandardPlateTolerance
STANDARD STANDARD
0.625 0.200 24.13 2.250 2.590 316.23 Thickness:PlusOnly
LENGTHS LENGTHS
0.750 0.287 34.70 2.500 3.190 391.63 Length/Width:+.250"/.00"
BlackPEEK450GL30
0.875 0.391 47.36 CUSTOM 2.750 3.860 467.68 CUSTOM availableinsomesizes
1.000 0.511 58.60 SIZES 3.000 4.600 543.73 SIZES Callforpriceandavailability
AVAILABLE AVAILABLE
RoundBarTolerance
1.125 0.646 78.61 3.250 5.390 649.09
PlusOnly
1.250 0.798 97.04 ON 3.500 6.260 754.38 ON
REQUEST REQUEST
1.375 0.966 117.28 3.750 7.180 --
.093" 0.0043 11.80 16.52 23.59 28.31 33.03 37.75 45.30 56.63 75.50 .093" 0.61 23.99
.125" 0.0057 15.73 22.02 31.46 37.75 44.04 50.33 60.40 75.50 100.67 .125" 0.83 31.99
.250" 0.0115 28.13 39.39 56.27 67.52 78.78 90.03 108.04 135.04 180.06 .250" 1.65 57.22
.375" 0.0172 39.85 55.79 79.70 95.64 111.58 127.52 153.03 191.28 255.04 .375" 2.48 81.05
.500" 0.0229 53.09 74.33 106.18 127.42 148.65 169.89 203.86 254.83 339.77 .500" 3.30 107.98
.625" 0.0286 67.02 93.82 134.03 160.84 187.64 214.45 257.34 321.67 428.90 .625" 4.13 136.30
.750" 0.0344 79.42 111.19 158.85 190.62 222.39 254.16 304.99 381.24 508.31 .750" 4.95 161.54
12" x 12"
.875" 0.0401 104.25 145.95 208.49 250.19 291.89 333.59 400.31 500.39 667.18 .875" 5.78 212.03 12" x 24"
1.00" 0.0458 104.25 145.95 208.49 250.19 291.89 333.59 400.31 500.39 667.18 1.00" 6.60 212.03 12" x 48"
24" x 24"
1.25" 0.0573 180.69 258.13 309.75 361.38 413.01 495.61 619.51 826.01 1.25" 8.25 262.50
24" x 48"
1.50" 0.0688 215.46 307.80 369.36 430.92 492.48 590.97 738.71 984.95 1.50" 9.90 313.01
1.75" 0.0802 367.35 440.82 514.30 587.77 705.32 881.65 1,175.53 1.75" 11.55 373.58
2.00" 0.0917 424.03 508.83 593.64 678.44 814.13 1,017.66 1,356.88 2.00" 13.20 431.21
Contactcustomerserviceforvolumediscounts 2.50" 16.50 586.46
email: sales@tridentplastics.com
2156725225 3.00" 19.80 701.45
3.50" 23.10 833.48
4.00" 26.40 965.51
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.021 $0.82 PRICE 1.250 0.676 $20.49 PRICE 2.750 3.270 $100.01
0.312 0.042 1.33 PER 1.375 0.817 24.26 PER 3.000 3.890 118.04
0.375 0.061 1.85 LINEAR 1.500 0.973 28.03 LINEAR 3.250 4.570 160.67
0.437 0.083 3.28 FOOT 1.625 1.140 40.18 FOOT 3.500 5.300 160.67
0.500 0.108 3.28 1.750 1.320 40.18 3.750 6.780 209.85
5'&10' 5'&10'
0.562 0.137 5.13 1.875 1.520 52.47 4.000 6.920 209.85
STANDARD STANDARD
0.625 0.169 5.13 2.000 1.730 52.47 4.500 8.760 265.58
LENGTHS LENGTHS
0.750 0.243 7.37 2.125 1.950 67.23 5.000 10.80 327.80
0.875 0.331 10.25 2.250 2.190 67.23 5.500 13.10 472.16
1.000 0.432 13.11 2.375 2.440 81.96 6.000 15.60 472.16
1.125 0.547 16.60 2.500 2.700 81.96 8.000 27.70 $833.14
Itemslistedwithastrikethrougharenonstocksizes
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks.
1.75" 0.0955 1,012.82 1,266.02 1,519.23 1,772.43 2,025.63 1.75" 13.76 643.74
2.00" 0.1092 1,169.03 1,461.29 1,753.55 2,045.81 2,338.07 2.00" 15.72 743.03
2.50" 19.65 1,010.55
3.00" 23.58 1,208.69
Contactcustomerserviceforvolumediscounts
email: sales@tridentplastics.com
2156725225
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.025 $2.04 PRICE 1.250 0.804 $41.37 PRICE 2.750 3.890 $249.32
0.312 0.050 3.33 PER 1.375 0.971 56.16 PER 3.000 4.630 294.18
0.375 0.073 4.62 LINEAR 1.500 1.160 51.06 LINEAR 3.250 5.430 440.50
0.437 0.099 9.40 FOOT 1.625 1.360 110.13 FOOT 3.500 6.300 400.45
0.500 0.128 8.18 1.750 1.570 100.12 3.750 8.060 575.31
5'&10' 5'&10'
0.562 0.163 14.05 1.875 1.810 143.84 4.000 8.230 523.01
STANDARD STANDARD
0.625 0.201 12.77 2.000 2.060 130.77 4.500 10.40 661.91
LENGTHS LENGTHS
0.750 0.289 18.39 2.125 2.320 184.32 5.000 12.80 817.21
0.875 0.394 21.31 2.250 2.600 167.57 5.500 15.60 1,091.52
1.000 0.514 25.04 2.375 2.900 224.73 6.000 18.50 1,176.77
1.125 0.650 32.67 2.500 3.210 204.29 8.000 27.70 $2,092.05
Itemslistedwithastrikethrougharenonstocksizes
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks.
UDELPolysulfone(PSU)isanambersemitransparent,heatresistant,highperformance
engineeringthermoplastic.Itoffersexcellentmechanical,electricalandimprovedchemical
Broadtemperaturerange
resistancepropertiesrelativetopolycarbonate.Polysulfonespropertiesremainrelatively
ExcellentMechanicalProperties
consistentoverabroadtemperaturerange,from150F(100C)to300F(100C).UDEL
ExcellentElectricalProperties
Polysulfoneishydrolysisresistantforcontinuoususeinhotwaterandsteamattemperaturesup
Hydrolysisresistant
to300F.ItsflameresistanceisUL94V0at.177thickness(4.5mm).UDELPolysulfoneoffers
Radiationstability
highchemicalresistancetoacidicandsaltsolutions,andgoodresistancetodetergents,hotwater
Lowionicimpurity
andsteam.Inaddition,polysulfonehasexcellentradiationstability,andofferslowionicimpurity
SteamResistant
levels.UDELPolysulfoneoftenreplacespolycarbonatewhenhighertemperatures,improved
LowOutgassingLevels
chemicalresistanceorautoclavabilityisrequired.Itiscommonlyusedforanalytical
instrumentation,medicaldevicesandsemiconductorprocessequipmentcomponents.
Specifications: FDA21CFR177.1655
ASTMD639411SP0112(resin) NSF51NSF61
USPclassVIMedicalGradeavailableonrequest
.062" 0.0028 9.14 12.80 18.29 21.94 25.60 29.26 35.11 43.89 58.51 .062" 0.40 18.60
.093" 0.0042 13.71 19.20 27.43 32.91 38.40 43.89 52.66 65.83 87.77 .093" 0.60 27.89
24" x 48"
.125" 0.0056 18.43 25.81 36.87 44.24 51.61 58.99 70.78 88.48 117.97 .125" 0.81 37.49
48" x 96"
.187" 0.0084 27.58 38.61 55.15 66.18 77.21 88.24 105.89 132.36 176.48 .187" 1.21 56.09
.250" 0.0112 36.87 51.61 73.73 88.48 103.22 117.97 141.56 176.96 235.94 .250" 1.61 74.98
.375" 0.0168 55.30 77.42 110.60 132.72 154.84 176.96 212.35 265.43 353.91 .375" 2.42 112.47
.500" 0.0224 73.73 103.22 147.46 176.96 206.45 235.94 283.13 353.91 471.88 .500" 3.23 149.96
.625" 0.0280 92.16 129.03 184.33 221.19 258.06 294.93 353.91 442.39 589.85 .625" 4.03 187.45
.750" 0.0336 110.60 154.84 221.19 265.43 309.67 353.91 424.69 530.87 707.82 .750" 4.84 224.94
.875" 0.0392 129.03 180.64 258.06 309.67 361.28 412.90 495.48 619.35 825.79 .875" 5.64 262.43
1.00" 0.0448 147.46 206.45 294.93 353.91 412.90 471.88 566.26 707.82 943.76 1.00" 6.45 299.93 12" x 12"
1.25" 0.0560 258.06 368.66 442.39 516.12 589.85 707.82 884.78 1,179.71 1.25" 8.06 374.91 12" x 24"
12" x 48"
1.50" 0.0672 309.67 442.39 530.87 619.35 707.82 849.39 1,061.73 1,415.65 1.50" 9.68 449.89 24" x 24"
1.75" 0.0784 516.12 619.35 722.57 825.79 990.95 1,238.69 1,651.59 1.75" 11.29 524.87 24" x 48"
2.00" 0.0896 589.85 707.82 825.79 943.76 1,132.52 1,415.65 1,887.53 2.00" 12.90 599.85
Contactcustomerserviceforvolumediscounts 2.50" 16.13 749.81
email: sales@tridentplastics.com
2156725225 3.00" 19.35 899.78
Itemslistedwithastrikethrougharenonstocksizes 3.50" 22.58 1,049.74
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks. 4.00" 25.80 1,199.70
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.026 $1.45 PRICE 1.250 0.660 $18.59 PRICE 2.750 3.190 $92.97
0.312 0.041 2.11 PER 1.375 0.798 23.78 PER 3.000 3.800 108.10
0.375 0.059 1.73 LINEAR 1.500 0.950 26.66 LINEAR 3.250 4.460 161.72
0.437 0.081 3.68 FOOT 1.625 1.110 32.43 FOOT 3.500 5.170 147.02
0.500 0.106 3.03 1.750 1.290 36.28 3.750 5.940 211.65
4'&8' 4'&8'
0.562 0.134 5.66 1.875 1.480 53.26 4.000 6.760 192.42 Standard Plate Tolerance
STANDARD STANDARD
0.625 0.165 4.64 2.000 1.690 47.56 4.500 8.550 246.47 .031" - .125": +/- 10%
LENGTHS LENGTHS
0.750 0.239 6.67 2.125 1.910 67.79 5.000 10.600 302.68 .187" - 4.00" Plus Only
0.875 0.323 9.19 2.250 2.140 60.54 5.500 12.800 367.54 Round Bar Tolerance
.250" - 2.00": + .005"/-.00"
1.000 0.422 11.84 2.375 2.380 83.55 6.000 15.200 443.21
2.125" - 2.75": +.031"/-.00"
1.125 0.534 15.13 2.500 2.640 74.60 8.000 27.000 call for $ 3.00" - 8.00": Plus Only
BEARINGGRADERYTONPPS
BearinggradeRytonisinternallylubricatedandcarbonfiberreinforcedcompressionmoldedPPSofferingalowcoefficientof
thermalexpansionanduncompromisedchemicalresistance.Itiswellsuitedtowearapplicationsorwhenanelectrically
conductivematerialisrequired.
TECHTRONHPV
TechtronHPVexhibitsexcellentwearresistanceandalowcoefficientoffriction.Itovercomesthedisadvantagesofvirgin
PPScausedbyahighcoefficientoffriction,andofglassfibrereinforcedPPSwhichcancauseprematurewearofthe
ChemicalResistance
counterfaceinmovingpartapplications. TechtronPPS(unreinforced)
Acetone Resistant
Properties English InternationalSI Ammoniasolution10% Resistant
TechtronPPS(unreinforced) Unit NominalValue Unit NominalValue TestMethod Benzene Limitedresistance
Density lb/in3 0.049 g/cm3 1.350 ASTMD792 Dieseloil Resistant
WaterAbsorption,73F24hr % 0.01 % 0.01 ASTMD570 Ethanol,96% Resistant
TensileStrength(Yield) psi 13500 Mpa 93 ASTMD638 Formaldehyde,aqueoussolution30% Resistant
FlexuralStrength73F psi 21000 Mpa 145 ASTMD790 Formicacid10% Limitedresistance
FlexuralModulus73F psi 575000 Mpa 3968 ASTMD790 Glycerin Resistant
CompressiveStress73F psi 21500 Mpa 148 ASTMD695 Glycol Resistant
IzodImpact(notched)73F ftlb/inch 0.6 J/m 32 ASTMD256A Hydrochloricacid,aqueoussolution2% Resistant
Hardness ShoreD 85 ShoreD 85 ASTMD2240 Hydrochloricacid,aqueoussolution36% Limitedresistance
Coefficientoffriction,dynamic 0.40 0.40 PTM55007 Hydrofluoricacid,40% Limitedresistance
DeflectionTemperature264psi F 250 C 121.21 ASTMD648 Isopropanol Resistant
MeltingTemperature F 540 C 282.45 ASTMD3418 Methanol Resistant
DielectricStrength,shortterm V/mil 540 kV/mm 21 ASTMD149 Methylenechloride Limitedresistance
FlammabilityRating .125" V0 3.1mm V0 UL94 Nitricacid,aqueoussolution10% Resistant
*Thisinformationisbasedonaverageresinvaluespecificationsandisonlytoassistandadviseyouonthecurrenttechnical Nitricacid,aqueoussolution50% Notresistant
knowledge,itisgivenwithoutobligationsorliability. Phosphoricacid50% Resistant
Sulphuricacid,aqueoussolution2% Resistant
Sulphuricacid,concentrated98% Resistant
Trichloroethylene Limitedresistance
.250" 0.0122 22.69 31.77 45.38 54.45 63.53 72.61 81.68 99.83 108.91 .250" 1.76 184.59
.375" 0.0183 34.09 47.73 68.19 81.82 95.46 109.10 122.74 150.01 163.65 .375" 2.63 277.37
.500" 0.0244 45.37 63.52 90.74 108.89 127.04 145.19 163.33 199.63 217.78 .500" 3.51 369.12
.625" 0.0305 56.78 79.49 113.56 136.28 158.99 181.70 204.41 249.84 272.55 .625" 4.39 461.95
.750" 0.0366 68.06 95.28 136.12 163.34 190.57 217.79 245.02 299.46 326.69 .750" 5.27 553.71
1.00" 0.0488 90.74 127.04 181.48 217.78 254.07 290.37 326.67 399.26 435.56 1.00" 7.02 738.23
1.25" 0.0609 113.43 158.80 226.86 272.23 317.61 362.98 408.35 499.09 507.55 1.25" 8.78 922.82
1.50" 0.0731 190.56 272.22 326.67 381.11 435.56 490.00 598.89 609.04 1.50" 10.53 1,107.35
1.75" 0.0853 317.59 381.11 444.63 508.15 571.67 698.71 762.23 1.75" 12.29 1,291.91
2.00" 0.0975 363.23 435.88 508.53 581.17 653.82 799.11 871.76 2.00" 14.04 1,477.56
Metric
Othergradesavailablecallforpriceandavailability: 2.50" 17.55 1,846.67 sizes
Contactcustomerserviceforvolumediscounts available
3.00" 21.06 2,215.79
2156725225 onrequest
3.50" 24.57 2,586.67
email: sales@tridentplastics.com 4.00" 28.08 2,957.06
Itemslistedwithastrikethrougharenonstocksizes
andmayrequirea500lbminimumproductionrunandaleadtimeof48weeks.
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.029 $2.81 PRICE 1.500 1.030 $100.43 PRICE 4.000 7.350 $713.95
0.312 0.045 -- PER 1.625 1.210 -- PER 4.250 8.300 --
0.375 0.065 6.27 LINEAR 1.750 1.410 137.19 LINEAR 4.500 9.310 903.59
0.437 0.088 -- FOOT 1.875 1.620 -- FOOT 5.000 11.500 1,116.33
0.500 0.115 11.18 2.000 1.840 178.54 5.500" 15.825 1,350.31
5'&10' 5'&10'
0.562 0.145 -- 2.125 2.080 -- 6.000 16.600 1,586.27 StandardPlateTolerance
STANDARD STANDARD
0.625 0.179 17.48 2.250 2.330 225.88 Thickness:PlusOnly
LENGTHS LENGTHS
0.750 0.259 25.14 2.500 2.870 279.35 Length/Width:+.250"/.00"
0.875 0.352 34.20 CUSTOM 2.750 3.480 337.86 CUSTOM
1.000 0.460 44.60 SIZES 3.000 4.140 401.35 SIZES RoundBarTolerance
AVAILABLE AVAILABLE .250"2.00":+.005"/.00"
1.125 0.582 56.47 3.250 4.860 471.99
2.125"2.50":+.031"/.00"
1.250 0.718 69.81 ON 3.500 5.630 546.58 ON
2.750"5.00":PlusOnly
REQUEST REQUEST
1.375 0.869 -- 3.750 6.460 --
UHMWPolymerisaLinearPolyethylenewithamolecularweightintherangeof3,000,000to6,000,000.Thisvaluerepresents Exceptionallyhighnotchedimpactstrength
theaveragemolecularweight.Therefore,UHMWPolymershaveamolecularweightaverage10timesthatofconventional Highenergyabsorptioncapacityathighstressrate
highdensitypolyethyleneresins.ThehighermolecularweightiswhatgivesUHMWPolymersauniquecombinationof Excellentwearresistantproperties
characteristicsmakingitmoresuitableformanyapplicationswherelowermolecularweightgradesfail. Lowcoefficientoffriction
Veryhighchemicalresistancetoacids,alkalisandcorrosive
TheincredibledurabilityandversatilityofUHMWPEmakesitafavoriteamongengineersanddesignersinnearlyevery gases
industryworldwide.UHMWPEslongmolecularchaingivesitahostofexceptionalattributes:highabrasionresistance,low Highlyresistanttoenvironmentalstresscracking
coefficientoffrictionandunparalleledimpactresistance,evenincryogenicenvironments. Wideservicetemperaturerangefrom200Fto180F
UHMWPEsmolecularweightrangesfromalowof3.1milliontoashighas10million.Whileimpactstrengthismaximizedat
3.54million,abrasionresistancecontinuestoimproveasthemolecularweightincreases.UHMWPEistheidealsolutionfor
reducingwearandfrictionandenhancingefficiencyandproductivityinautomotiveandrailroadapplications,inagriculture,
medical,printingandpackagingapplications,andinmaterialhandlingandfoodprocessing.
StandardGrades:PremiumGrades: Specifications:
Virgin,FDACompliantUHMWPE Tivar88BlueCrosslinked ASTMD402011(resinspec)
UVResistantBlack TivarOilfilledASTMD671201(shapespec)
ReprocessedBlack TivarDrySlide
ChemicalResistance
TivarESDStaticdissipative TivarCeramPGreen
VirginUHMWPE
Acetone Resistant
Ammoniasolution10% Resistant
Benzene Limitedresistance
Dieseloil Resistant
Properties English InternationalSI Formaldehyde,aqueoussolution30% Resistant
VirginUHMWPE Unit
NominalValue Unit NominalValue TestMethod Formicacid Resistant
Density lb/in3 0.033 g/cm3 0.930 ASTMD792 Glycerin Resistant
WaterAbsorption,73F24hr % <.010 % <.010 ASTMD570 Glycol Resistant
TensileStrength(Yield) psi 5800 Mpa 40 ASTMD638 Hydrochloricacid,aqueoussolution50% Resistant
FlexuralStrength73F psi 3500 Mpa 24 ASTMD790 Hydrofluoricacid,>40% Resistant
ShearStrength psi 4800 Mpa 33 ASTMD732 Isopropanol Resistant
CompressiveStress73F psi 3000 Mpa 21 ASTMD695 Methanol Resistant
IzodImpact(notched)73F ftlb/inch nobreak J/m nobreak ASTMD256A Methylenechloride Limitedresistance
Hardness ShoreD 66 ShoreD 66 ASTMD2240 Nitricacid,aqueoussolution50% Resistant
Coefficientoffriction,dynamic 0.12 0.12 QTM55007 Nitricacid,aqueoussolution70% Notresistant
DeflectionTemperature264psi F 116 C 46.70 ASTMD648 Phosphoricacid50100% Resistant
MeltingTemperature F 275 C 135.11 ASTMD3418 Sulphuricacid,concentrated100% Resistant
MaximumServiceTemperature F 180 C 82.29 ASTMD149 Trichloroethylene Notresistant
FlammabilityRating .125" HB 3.1mm HB UL94 Triethanolomine Resistant
*Thisinformationisbasedonaverageresinvaluespecificationsandisonlytoassistandadviseyouonthecurrenttechnical Acompletelistofchemicalresistanceatelevatedtemperaturesisavailableon
knowledge,itisgivenwithoutobligationsorliability. request,calloremailcustomerserviceformoreinformation.
.187" 0.0065 2.74 3.84 4.94 6.04 7.13 8.23 9.33 12.07 14.27 .187" 0.94 5.58
.250" 0.0087 3.41 4.77 6.13 7.50 8.86 10.22 11.58 14.99 17.72 .250" 1.25 6.93
.375" 0.0130 5.11 7.16 9.20 11.24 13.29 15.33 17.38 22.49 26.58 .375" 1.88 10.40
.500" 0.0174 6.81 9.54 12.27 14.99 17.72 20.44 23.17 29.98 35.44 .500" 2.50 13.86 12"x12"
.625" 0.0217 8.52 11.93 15.33 18.74 22.15 25.55 28.96 37.48 44.29 .625" 3.13 17.33 12"x48"
24"x24"
.750" 0.0260 9.78 13.70 17.61 21.52 25.44 29.35 33.26 43.05 50.88 .750" 3.75 19.90
24"x48"
.875" 0.0304 11.41 15.98 20.55 25.11 29.68 34.24 38.81 50.22 59.35 .875" 4.38 23.22 48"x48"
1.00" 0.0347 13.04 18.26 23.48 28.70 33.92 39.13 44.35 57.40 67.83 1.00" 5.00 26.53 48"x72"
48"x96"
1.25" 0.0434 22.83 29.35 35.87 42.40 48.92 55.44 71.75 84.79 1.25" 6.25 33.17
48"x120"
1.50" 0.0521 28.62 36.80 44.98 53.15 61.33 69.51 89.95 106.31 1.50" 7.50 41.58 48"x144"
1.75" 0.0608 42.93 52.47 62.01 71.55 81.09 104.94 124.02 1.75" 8.75 48.51 60"x120"
2.00" 0.0694 49.06 59.97 70.87 87.23 92.68 130.84 141.74 2.00" 10.00 55.44
2.250" 0.0781 67.46 79.73 98.13 104.26 147.19 159.46 2.250" 11.25 62.37
2.50" 0.0868 74.96 88.59 109.03 115.85 163.55 177.18 2.50" 12.50 69.30
3.00" 0.1042 113.90 140.18 168.22 210.28 280.37 3.00" 15.00 89.10
Contactcustomerserviceforvolumediscounts Thickness
3.50" 0.1215 185.35 222.43 278.03 370.71 3.50" 17.50 117.81
2156725225 Tolerance
4.00" 0.1563 254.20 317.75 423.67 4.00" 22.50 134.64
email: sales@tridentplastics.com +/10%
5.00" 0.1736 397.19 529.58 5.00" 25.00 168.30
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.020 $0.78 PRICE 1.500 0.780 $4.01 PRICE 4.250 6.400 29.26
0.375 0.050 0.80 PER 1.750 1.000 5.25 PER 4.500 7.200 30.79
0.500 0.090 0.85 LINEAR 2.000 1.340 6.56 LINEAR 5.000 8.350 38.60
FOOT FOOT
0.625 0.130 1.14 2.250 1.670 8.30 5.500 10.190 46.84
0.750 0.180 1.50 5'&10' 2.500 2.250 10.61 5'&10' 6.000 12.050 54.08
0.875 0.250 2.05 STANDARD 2.750 2.590 12.99 STANDARD 6.500 14.220 82.75
1.000 0.330 1.76 LENGTHS 3.000 3.110 13.45 LENGTHS 7.000 15.920 137.93
1.125 0.420 2.27 3.250 3.780 16.20 8.000 21.990 171.02
PlusOnly PlusOnly
1.250 0.570 2.69 3.500 4.100 18.55 9.000 26.320 258.02
Tolerance Tolerance
1.375 2.550 3.31 4.000 5.540 $23.51 10.000 33.810 341.70
MeetsFDA/USDAfoodhandlingguidelines(naturalcolor)
HighDensityPolyethylene(HDPE)isusedinavarietyofapplicationsandindustrieswhereexcellentimpactresistance,high
Chemicalandcorrosionresistant
tensilestrength,lowmoistureabsorptionandchemicalandcorrosionresistancepropertiesarerequired.Itisavailablein
Lightweight
bothextruded(upto1"thick)andcompressionmoldedsheet(from1.00"through8.00"thick).
Nomoistureabsorption
Lowdensitypolyethylene(LDPE)ismoreflexiblethanHDPE,whichmakesitagoodchoiceforprostheticdevices,mostof
Hightensilestrength
whichareeitherdrapeformedorvacuumformed.Itsimpactresistancemakesitanaturalforimpactpads,whileitseasy
Nontoxic
machinabilitymakesitagoodchoiceforfabricatedpartswherechemicalandcorrosionresistanceisdemanded.LDPEis
Nonstaining
stressrelievedanda"natural",translucentwhitecolor.Itisavailableinbothextruded(upto1.00"thick)andcompression
Thermoformingperformance
moldedsheet(from1.00"through8.00"thick).
.187" 0.0065 1.07 1.50 1.92 2.35 2.78 3.21 3.63 4.70 5.56 .187" 0.94 2.17
.250" 0.0087 1.33 1.86 2.39 2.92 3.45 3.98 4.51 5.84 6.90 .250" 1.25 2.70
.375" 0.0130 1.99 2.79 3.58 4.38 5.18 5.97 6.77 8.76 10.35 .375" 1.88 4.05 12" x 12"
.500" 0.0174 2.66 3.72 4.78 5.84 6.90 7.97 9.03 11.68 13.81 .500" 2.50 5.40 12" x 48"
24" x 24"
.625" 0.0217 3.32 4.65 5.97 7.30 8.63 9.96 11.28 14.60 17.26 .625" 3.13 6.75 24" x 48"
.750" 0.0260 3.98 5.58 7.17 8.76 10.35 11.95 13.54 17.52 20.71 .750" 3.75 8.10 48" x 48"
48" x 72"
1.00" 0.0347 5.31 7.43 9.56 11.68 13.81 15.93 18.05 23.36 27.61 1.00" 5.00 10.80
48" x 96"
1.25" 0.0434 9.29 11.95 14.60 17.26 19.91 22.57 29.21 34.52 1.25" 6.25 13.50 48" x 120"
1.50" 0.0521 11.15 14.34 17.52 20.71 23.90 27.08 35.05 41.42 1.50" 7.50 16.20 60" x 120"
1.75" 0.0608 25.65 31.35 37.05 42.75 48.44 62.69 74.09 1.75" 8.75 28.98
2.00" 0.0694 31.86 38.23 44.60 50.98 54.16 76.46 82.84 2.00" 10.00 32.40
2.250" 0.0781 52.57 61.33 70.09 74.47 105.14 113.90 2.250" 11.25 44.55 12" x 12"
12" x 48"
2.50" 0.0868 58.41 68.15 77.88 82.75 116.82 126.56 2.50" 12.50 49.50 24" x 24"
3.00" 0.1042 96.64 110.45 132.54 165.67 220.90 3.00" 15.00 70.20 24" x 48"
48" x 48"
3.50" 0.1215 Contactcustomerserviceforvolumediscounts 128.86 154.63 193.28 257.71 3.50" 17.50 81.90
48" x 72"
4.00" 0.1389 2156725225 203.90 254.88 339.84 4.00" 20.00 108.00 48" x 96"
5.00" 0.1736 552.24 736.32 5.00" 25.00 234.00 12" x 12"
email: sales@tridentplastics.com
6.00" 0.2083 1,019.52 6.00" 30.00 324.00 24" x 48"
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.020 $0.50 PRICE 1.750 1.000 $6.78 PRICE 5.500 10.190 63.88
0.375 0.050 0.66 PER 2.000 1.340 8.71 PER 6.000 12.050 76.03
0.500 0.090 0.74 LINEAR 2.250 1.670 9.84 LINEAR 6.500 14.220 108.00
0.625 0.130 1.09 FOOT 2.500 2.250 13.39 FOOT 7.000 15.920 120.57
0.750 0.180 1.49 4'&8' 2.750 2.590 15.98 4'&8' 8.000 21.990 166.32
0.875 0.250 1.98 STANDARD 3.000 3.110 18.98 STANDARD 9.000 26.320 210.36
1.000 0.330 2.42 LENGTHS 3.500 4.100 24.42 LENGTHS 10.000 33.810 261.00
1.125 0.420 2.95 4.000 5.540 33.78 12.000 48.200 374.23
PlusOnly PlusOnly
1.250 0.570 3.37 4.500 7.200 42.75 14.000 63.680
Tolerance Tolerance CALL
1.500 0.780 4.74 5.000 8.350 $52.76 16.000 88.000
.187" 0.0062 1.42 1.99 2.56 3.12 3.69 4.26 4.83 6.25 7.39 .187" 0.89 2.56
.250" 0.0083 1.76 2.47 3.18 3.88 4.59 5.29 6.00 7.76 9.17 .250" 1.20 3.18
.375" 0.0124 2.65 3.70 4.76 5.82 6.88 7.94 9.00 11.64 13.76 .375" 1.79 4.78
.500" 0.0166 3.53 4.94 6.35 7.76 9.17 10.59 12.00 15.52 18.35 .500" 2.39 6.37
.625" 0.0207 5.01 7.01 9.01 11.01 13.02 15.02 17.02 22.03 26.03 .625" 2.99 9.03
.750" 0.0249 6.29 8.81 11.33 13.85 16.36 18.88 21.40 27.69 32.73 .750" 3.59 11.36
12" x 12"
1.00" 0.0332 8.39 11.75 15.11 18.46 21.82 25.18 28.53 36.92 43.64 1.00" 4.78 15.14 12" x 48"
1.25" 0.0415 15.81 20.32 24.84 29.36 33.87 38.39 49.68 58.71 1.25" 5.98 20.37 24" x 24"
24" x 48"
1.50" 0.0498 18.97 24.39 29.81 35.23 40.65 46.07 59.62 70.46 1.50" 7.17 24.45 48" x 48"
1.75" 0.0581 28.45 34.78 41.10 47.42 53.75 69.55 82.20 1.75" 8.37 28.52 48" x 72"
48" x 96"
2.00" 0.0664 38.59 46.31 54.03 61.75 65.61 92.63 100.35 2.00" 9.56 34.82
2.250" 0.0747 60.97 71.13 81.30 86.38 121.94 132.10 2.250" 10.76 45.84
2.50" 0.0830 98.54 114.96 131.39 139.60 197.08 213.50 2.50" 11.95 74.09
3.00" 0.0996 184.68 211.07 253.28 316.60 422.13 3.00" 14.34 119.02
3.50" 0.1162 Contactcustomerserviceforvolumediscounts 270.87 325.04 406.30 541.74 3.50" 16.73 152.74
4.00" 0.1328 2156725225 439.02 548.77 731.69 4.00" 19.12 206.30
5.00" 23.90 297.56
email: sales@tridentplastics.com 24" x 48"
6.00" 28.68 404.67
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.020 $0.64 PRICE 1.750 1.000 $8.48 PRICE 5.500 10.190 69.13
0.375 0.050 0.74 PER 2.000 1.340 11.09 PER 6.000 12.050 82.31
0.500 0.090 0.84 LINEAR 2.250 1.670 14.08 LINEAR 6.500 14.220 105.40
0.625 0.130 1.18 FOOT 2.500 2.250 17.30 FOOT 7.000 15.920 111.57
0.750 0.180 1.68 4'&8' 2.750 2.590 21.07 4'&8' 8.000 21.990 146.32
0.875 0.250 2.26 STANDARD 3.000 3.110 24.97 STANDARD 9.000 26.320 184.73
1.000 0.330 2.78 LENGTHS 3.500 4.100 32.05 LENGTHS 10.000 33.810 228.63
1.125 0.420 3.78 4.000 5.540 39.18 12.000 48.200 329.22
PlusOnly PlusOnly
1.250 0.570 4.32 4.500 7.200 49.55 14.000 63.680
Tolerance Tolerance CALL
1.500 0.780 6.20 5.000 8.350 $57.16 16.000 88.000
.187" 0.0062 1.05 1.47 1.88 2.30 2.72 3.14 3.56 4.61 5.44 .187" 0.89 2.13
.250" 0.0082 1.30 1.82 2.34 2.86 3.38 3.90 4.42 5.72 6.76 .250" 1.19 2.64
.375" 0.0123 1.95 2.73 3.51 4.29 5.07 5.85 6.63 8.58 10.14 .375" 1.78 3.97 12" x 12"
.500" 0.0165 2.60 3.64 4.68 5.72 6.76 7.80 8.84 11.44 13.52 .500" 2.37 5.29 12" x 48"
24" x 24"
.625" 0.0206 3.25 4.55 5.85 7.15 8.45 9.75 11.05 14.30 16.91 .625" 2.96 6.61 24" x 48"
.750" 0.0247 3.90 5.46 7.02 8.58 10.14 11.70 13.26 17.17 20.29 .750" 3.56 7.93 48" x 48"
48" x 72"
1.00" 0.0329 5.20 7.28 9.36 11.44 13.52 15.61 17.69 22.89 27.05 1.00" 4.74 10.58
48" x 96"
1.25" 0.0411 12.33 15.86 19.38 22.90 26.43 29.95 38.76 45.81 1.25" 5.93 17.92 48" x 120"
1.50" 0.0494 14.80 19.03 23.26 27.48 31.71 35.94 46.51 54.97 1.50" 7.11 21.50 60" x 120"
1.75" 0.0576 28.54 34.88 41.23 47.57 53.91 69.77 82.45 1.75" 8.30 32.25
2.00" 0.0658 36.24 43.49 50.74 57.99 61.61 86.99 94.23 2.00" 9.48 36.86
2.250" 0.0741 67.96 79.28 90.61 96.27 135.91 147.24 2.250" 10.67 57.59 12" x 12"
12" x 48"
2.50" 0.0823 75.51 88.09 100.68 106.97 151.02 163.60 2.50" 11.85 63.99 24" x 24"
3.00" 0.0988 126.85 144.98 173.97 217.46 289.95 3.00" 14.22 92.15 24" x 48"
48" x 48"
3.50" 0.1152 Contactcustomerserviceforvolumediscounts 169.14 202.97 253.71 338.28 3.50" 16.59 107.50
48" x 72"
4.00" 0.1317 2156725225 231.96 289.95 386.60 4.00" 18.96 122.86 48" x 96"
5.00" 23.70 221.83 12" x 12"
email: sales@tridentplastics.com
6.00" 28.44 307.15 24" x 48"
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.020 $0.40 PRICE 1.750 1.000 $7.37 PRICE 5.500 10.190 71.01
0.375 0.050 0.61 PER 2.000 1.340 9.63 PER 6.000 12.050 85.54
0.500 0.090 0.81 LINEAR 2.250 1.670 12.21 LINEAR 6.500 14.220 103.68
0.625 0.130 1.22 FOOT 2.500 2.250 14.52 FOOT 7.000 15.920 114.91
0.750 0.180 1.69 2.750 2.590 18.07 8.000 21.990 173.28
5'&10' 5'&10'
0.875 0.250 2.14 3.000 3.110 21.54 9.000 26.320 242.02 Standard Plate Tolerance
STANDARD STANDARD
1.000 0.330 2.68 3.500 4.100 28.83 10.000 33.810 289.93 Thickness: +/- 10%
LENGTHS LENGTHS
1.125 0.420 3.27 4.000 5.540 37.67 12.000 48.200 416.75 Length/Width: +.500"/-.00"
1.250 0.570 3.76 4.500 7.200 48.20 14.000 63.680 Round Bar Tolerance
CALL
1.500 0.780 5.30 5.000 8.350 $56.35 16.000 88.000 Plus Only
.187" 0.0065 1.10 1.55 1.99 2.43 2.87 3.31 3.76 4.86 5.74 .187" 0.94 2.25
.250" 0.0087 1.37 1.92 2.47 3.02 3.57 4.12 4.66 6.04 7.13 .250" 1.25 2.79
.375" 0.0130 2.06 2.88 3.70 4.53 5.35 6.17 7.00 9.05 10.70 .375" 1.88 4.19
.500" 0.0174 2.74 3.84 4.94 6.04 7.13 8.23 9.33 12.07 14.27 .500" 2.50 5.58
.625" 0.0217 3.43 4.80 6.17 7.54 8.92 10.29 11.66 15.09 17.83 .625" 3.13 6.98 12" x 12"
.750" 0.0260 4.12 5.76 7.41 9.05 10.70 12.35 13.99 18.11 21.40 .750" 3.75 8.37 12" x 48"
24" x 24"
1.00" 0.0347 5.49 7.68 9.88 12.07 14.27 16.46 18.66 24.14 28.53 1.00" 5.00 11.16
24" x 48"
1.25" 0.0434 18.34 23.58 28.82 34.06 39.29 44.53 57.63 68.11 1.25" 6.25 26.64 48" x 48"
1.50" 0.0521 24.01 30.86 37.72 44.58 51.44 58.30 75.45 89.16 1.50" 7.50 34.88 30" x 60"
48" x 72"
1.75" 0.0608 42.01 51.35 60.68 70.02 79.35 102.69 121.36 1.75" 8.75 47.47 48" x 96"
2.00" 0.0694 53.35 64.02 74.68 85.35 90.69 128.03 138.70 2.00" 10.00 54.25 48" x 120"
60" x 120"
2.250" 0.0781 82.31 96.02 109.74 116.60 164.61 178.33 2.250" 11.25 69.75
2.50" 0.0868 91.45 106.69 121.93 129.55 182.90 198.14 2.50" 12.50 77.50
3.00" 0.1042 144.03 164.61 197.53 246.92 329.22 3.00" 15.00 104.63
3.50" 0.1215 Contactcustomerserviceforvolumediscounts 228.53 274.23 342.79 457.05 3.50" 17.50 145.25
4.00" 0.1389 2156725225 376.09 470.11 626.82 4.00" 20.00 199.20
5.00" 25.00 290.50 12" x 12"
email: sales@tridentplastics.com
6.00" 30.00 398.40 24" x 48"
ROUNDBAR
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.020 $0.50 PRICE 1.750 1.000 $6.78 PRICE 5.500 10.190 63.88
0.375 0.050 0.66 PER 2.000 1.340 8.71 PER 6.000 12.050 76.03
0.500 0.090 0.74 LINEAR 2.250 1.670 9.84 LINEAR 6.500 14.220 108.00
0.625 0.130 1.09 FOOT 2.500 2.250 13.39 FOOT 7.000 15.920 120.57
0.750 0.180 1.49 2.750 2.590 15.98 8.000 21.990 166.32
5'&10' 5'&10'
0.875 0.250 1.98 3.000 3.110 18.98 9.000 26.320 210.36 Standard Plate Tolerance
STANDARD STANDARD
1.000 0.330 2.42 3.500 4.100 24.42 10.000 33.810 261.00 Thickness: +/- 10%
LENGTHS LENGTHS
1.125 0.420 2.95 4.000 5.540 33.78 12.000 48.200 374.23 Length/Width: +.500"/-.00"
1.250 0.570 3.37 4.500 7.200 42.75 14.000 63.680 Round Bar Tolerance
CALL
1.500 0.780 4.74 5.000 8.350 $52.76 16.000 88.000 Plus Only
NormalImpact,CorrosionresistantStressrelievedASTMD178411class12454
ROUNDBARSTANDARDTOLERANCE"PLUSONLY"
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.029 $0.46 PRICE 1.750 1.440 $5.44 PRICE 4.500 9.675 $47.42
0.375 0.066 0.56 PER 1.875 1.657 6.11 PER 5.000 11.900 55.48
0.500 0.117 0.61 LINEAR 2.000 1.890 6.99 LINEAR 5.500 14.400 75.04
0.562 0.150 0.81 FOOT 2.125 2.120 7.58 FOOT 6.000 17.100 89.80
0.625 0.183 0.75 2.250 2.384 8.85 6.500 20.500 101.51
5'&10' 5'&10'
0.750 0.265 1.05 2.375 2.690 10.18 7.000 24.200 124.40
STANDARD STANDARD
0.875 0.358 1.39 2.500 2.963 11.11 8.000 31.500 191.45 Standard Plate Tolerance
LENGTHS LENGTHS
1.000 0.476 1.84 2.750 3.600 12.91 9.000 39.600 287.04 Thickness:
.062" - 1.00" +/- 10%
1.125 0.594 2.32 CUSTOM 3.000 4.400 16.46 CUSTOM 10.000 47.600 382.23 1.250" - 5.00" Plus Only
1.250 0.736 2.89 SIZES 3.250 5.010 18.79 SIZES 11.000 60.600 552.76 Length/Width: +.500"/-.00"
1.375 0.891 3.54 AVAILABLE 3.500 5.800 22.54 AVAILABLE 12.000 71.750 618.22 Round Bar Tolerance
ON ON Plus Only
1.500 1.060 4.17 3.750 6.705 25.40 14.000 93.500 994.08
Centerless Ground available on request
REQUEST REQUEST
1.625 1.244 5.00 4.000 7.660 28.18 16.000 120.000 1,364.50 Call for price
ROUNDBARSTANDARDTOLERANCE"PLUSONLY"
DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT DIAMETER LB/FT PRICE/FT
0.250 0.033 $0.73 PRICE 1.750 1.667 $14.59 PRICE 4.500 11.210 $175.95
0.375 0.074 1.28 PER 1.875 1.930 16.88 PER 5.000 14.010 227.55
0.500 0.135 1.41 LINEAR 2.000 2.193 19.19 LINEAR 5.500 16.500 294.79
0.562 0.200 2.06 FOOT 2.125 2.700 FOOT 6.000 20.400 364.47
0.625 0.218 2.06 2.250 2.793 24.44 6.500 22.810
5'&10' 5'&10'
0.750 0.305 2.86 2.375 3.230 42.98 7.000 26.640
STANDARD STANDARD
0.875 0.415 3.88 2.500 3.496 46.50 8.000 34.180 Standard Plate Tolerance
LENGTHS LENGTHS
1.000 0.586 5.49 2.750 4.080 54.28 9.000 44.840 Thickness:
.062" - 1.00" +/- 10%
1.125 0.688 6.44 CUSTOM 3.000 4.640 61.74 CUSTOM 10.000 56.040 1.250" - 5.00" Plus Only
1.250 0.842 7.89 SIZES 3.250 5.703 75.89 SIZES 11.000 66.000 Length/Width: +.500"/-.00"
1.375 1.030 9.64 AVAILABLE 3.500 6.660 106.22 AVAILABLE 12.000 81.600 Round Bar Tolerance
ON ON Plus Only
1.500 1.229 11.52 3.750 7.720
Centerless Ground available on request
REQUEST REQUEST
1.625 1.485 14.34 4.000 8.546 159.34 Call for price
PRICES
All prices are subject to change without notice. Lower prices may be available on volume orders. Prices shown do not include any Federal, State, Local taxes or freight costs.
RETURNS
No returns will be accepted, without prior written authorization from Trident Plastics Inc.. Claims for shortage or breakage for any reason must be made within 5 days of receipt of
shipment. All returns are subject to a 35% restocking charge plus reconditioning and repacking if neccasary. No cut-to-size, specially made, outdated, non-standard, or excess
inventory items may be returned for any reason.
DAMAGED SHIPMENTS
If a shipment appears damaged, it should be noted by the carrier on the carriers receipt. Inspect the material prior to signing the carriers receipt for merchandise. Items picked up
at warehouse sites must be inspected at time of pick up. Claims for damages thereafter will not be honored.
TRANSPORTATION POLICY
All orders are shipped F.O.B. shipping point by the least expensive surface method available, unless a premium method is requested.
CANCELLATION CHARGES
Orders for non-standard / custom materials may not be cancelled. Orders for standard material may be cancelled without charge provided is received prior to manufacturing.
LIMITED WARRANTY
All products are produced to standard commercial specifications and tolerances. Any defect or variance in specifications are warranted by the manufacturer. Our liabilities are
limited to the cost of material only.
TridentPlasticsInc.
1029PulinskiRoadIvylandPA18974
21567252252156725582Faxsales@tridentplastics.comwww.tridentplastics.com