Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CISCO IP COMMUNICATOR:
========================
1)No sound output with IP Communicator
Make sure that your speaker and microphone plugs are inserted into the correct a
udio jacks on your computer.
Check the volume and mute settings of the system sound devices through the Contr
ol Panel.
Check the volume setting of IP Communicator
Are you connecting over VPN ? If yes, ensure you are selecting the interface whi
ch you get after connecting over VPN & not the default NIC. This is usually the
main cause of one-way audio. Also, ensure CIPC installation on Win 7 is supporte
d, mostly it is but double chk to be sure.
Finally figured it out! Under preferences > audio tab > network button > Audio
IP Address.... I had to select "Detect Automatically"
It had been set to the default, I assume (which was the VPN client)
If your CM is on a different vlan than your pc, make sure the device that is se
t up as the default gateway on the pc is able to route to the CM. Try to ping fr
om the def gw to the CM and then from the def gw to the pc. It sounds like a sim
ple routing or vlan issue.