Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Revision Record
ISSUE 1.0
2012
1 Contents
Contents........................................................................................ iii
1 About This Version.....................................................................1-4
1.1 Version Infromation........................................................................................................................................1-4
1.2 The Procedure of Downloading Software......................................................................................................1-4
4.2.6 Stop......................................................................................................................................................4-31
CBS R002C02LG0305
Version Match Table(Saudi Arabia-Bravo).xls
Step 3 Obtain the required software packages based on version match table from SUPPORT WEBSITE
Note: You can choose a software package or several software packages one time and download them together.
Note: The software package with a lock is restricted, you need to apply and download them.
Note: After submitting the application, one of auditors will deal with it, but it may take some time, so if you want to pass the
authentication quickly, youd better contact auditor by eSpace as soon as possible and send the Application Form ID to auditor for
handling.
Note: You may check whether you pass the authentication from Application Form Downloads, if you pass it, you can click the
content of Title and download the software package.
Host SMP_BMP_AR_DC
SCP_CBP
Partition Name _ Billing_Invoic_RBI
/ 20G 15G
/opt 5G 5G
/rbi None 5G
1. SCP_CBP template
2. BMP_SMP template
# ls -dl /usr/bin/sh
If the system displays the following information, it indicates that the sh file exists.
lrwxrwxrwx 1 root root 7 Jan 13 23:16 /usr/bin/sh -> /bin/sh
If the sh file does not exist, run the following command to create the sh file:
# ln -s /bin/sh /usr/bin/sh
# /etc/init.d/novell-zmd stop
3. Check the status of the zmd server.
# /etc/init.d/novell-zmd status
The system displays the following information indicates the zmd server has been disabled.
Checking for ZENworks Management Daemon: unused
Find the shutdown command in the file and add immediate after each shutdown command.
% vi $ORACLE_HOME/bin/dbshut
case $VERSION in
connect internal
shutdown immediate
EOF
;;
*) $SQLDBA <<EOF
connect / as sysdba
shutdown immediate
quit
EOF
BEGIN
DBMS_WORKLOAD_REPOSITORY.MODIFY_BASELINE_WINDOW_SIZE(WINDOW_SIZE
=>2);
END;
/
BEGIN
dbms_workload_repository.modify_snapshot_settings(INTERVAL => 240,retention => 2 * 24 * 60);
END;
/
Note:If you login the SCP_CBP slot, please execute the commands as follows:
alter system set memory_max_target=2G scope=spfile;
alter system set memory_target=2G scope=spfile;
If you login the BMP_SMP slot, please execute the commands as follows:
alter system set memory_max_target=8G scope=spfile;
alter system set memory_target=8G scope=spfile;
4. Set the size of /dev/shm to a value that is the sum of the value of memory_target and 4 GB.
Switch to the root user.
% su - root
Uninstall the /dev/shm file system.
# umount /dev/shm
Note: If cannot umont /dev/shm, please use the command: fuser -ck /dev/shm , and then
execute umount /dev/shm again.
Change the value of the field in bold to the actual size in /etc/fstab.
# vi /etc/fstab
The information similar to the following is displayed:
shm /dev/shm tmpfs size= 4g 0 0
Assume that the value of memory_target is 2 GB. You need to change the value of the
field in bold to 6 GB. If the value of memory_target is 8GB, You need to change the value
of the field in bold to 12 GB.
shm /dev/shm tmpfs size= 6G/12G 0 0
Mount the /dev/shm file system.
# mount /dev/shm
Switch to the oracle user.
# su oracle
Execute the commands as follows:
sqlplus /as sysdba
startup
alter system set fast_start_mttr_target=1800 scope=spfile;
alter system set LOG_CHECKPOINT_TIMEOUT=0 scope=spfile;
alter system set LOG_CHECKPOINT_INTERVAL=0 scope=spfile;
alter system set max_dump_file_size='1024k' scope=spfile;
shutdown immediate
startup
5. Modify the running mode of the database to be the noarchive mode, restart the database server to
make the modification take effect.
SQL> shutdown immediate;
SQL> startup mount;
SQL> alter database noarchivelog;
SQL> alter database open;
6. Create Tablespaces for Storing Application Data
Log in to host as the oracle user.
Create tablespaces.
Note: If you login the SCP_CBP slot, please execute the commands as follows:
linux:/oracle/app/product/11g/db # cd network/
linux:/oracle/app/product/11g/db/network # cd admin/
linux:/oracle/app/product/11g/db/network/admin # ll
total 28
# vi /etc/profile.d/profile.csh
# vi /etc/profile.d/profile.sh
NOTE:
The directory cannot include Chinese characters.
Assume that after an installation package is uncompressed, all the files and folders are stored in
F:\iDeploy. The following operations take this directory as an example.
1. In F:\iDeploy\pkg, separately create the ENIP_install Service_install and Patch folder for storing
installation packages.
2. Copy the required installation packages to F:\iDeploy\pkg\ENIP_install. Service_install and Patch
On the interface, 18080 indicates the default HTTP port number of the iDeploy. The following takes the
port number as an example.
NOTE:
To stop the iDeploy, you can close the window or double-click F:\iDeploy\bin\shutdown.bat.
# vi /etc/profile
If the following line does not exist, add the following line:
umask 022
For example, to create the usr_ins user group, run the following commands:
# groupadd -g 1001usr_ins
For example, to create the usr_ins user in the user group, run the following commands:
# passwd usr_ins
The home directory of the usr_ins user is /home/usr_ins and its size is at least 2 GB.
1. Log in to the iDeploy and choose Control Panel > Host Management > Manage Host Group The
Manage Host Group page appears.
1. Log in to the iDeploy, and then choose Task Management > Create Install Task.
The Create Task >> Select Install Package page appears. Then, add a task name.
2. Click Next.
Click Next. The Create Task>>Configure NE page appears. Configure the corresponding hosts.
Figure 2 The configure NE page
3. Click Next.
Enter the Create Task>>Task Configuration page. Configure the IP address, node number, and
database information. See the information on the iDeploy interface.
NO
4. Click Export.
The NE configuration information is exported. You can import the information when installing the
software of the service software.
5. Click Finish.
You can click Execute to perform an installation task.
NOTE:
The icon indicates a breakpoint. You can click to cancel a breakpoint.
3. Click Deploy a package in Step List.
Procedure
Log in to all server blades as the usr_ins user.
usr_ins@BMP_SMP(SCP_CBP):/home/usr_ins/breeze/ideploy/20120309124328.1/script/cfg>ll
5.2.3 Install
Procedure
5.2.4 Prestart
Procedure
5.2.6 Stop
I. Procedure
1. Click Stop in Step List.
1. Log in to all server blades as the root user and execute the commands as follows:
chown R oracle:onistall /oracle;
Figure
1 Page of CBS platform installation task
When each progress reaches 100%, it indicates that the CBS plarform is started successfully.
Yes
/home/uoa
/tellin/tellinapp/uoa
6. Click each item to check the task information. Click Finish if all the task information is correct.
The installation task is created and the Unfinished Tasks page is displayed, as shown in Figure 12.
1. Click Control Panel > Task Management > Unfinished Tasks. Click the existing CBS service
installation task, such as CBS_service.
TIP:
indicates a breakpoint. To cancel a breakpoint, click , and then the installation steps can be
performed in turn.
2. Click Deploy a package in Step List, the corresponding task page is displayed, as shown in Figure
1.
When each progress reaches 100%, it indicates that the deployment is successful.
1. Check and make sure that license file $home/bin/licensescp.lic of SCP is replaced by a valid file.
2. Check and make sure that the CBS Platform is started.
NOTE:
Before perform the Load and Activate Service task, you must start the CBS platform at first.
3. Click Load and Activate Service in Step List.
When each progress reaches 100%, it indicates that the operation is performed successfully.
When the progress of each node reaches 100%, it indicates that the CBS platform is stopped
successfully.
When the installation progress reaches 100%, it indicates the installation successfully.
ATAE_XML.tar.gz
When the installation progress reaches 100%, it indicates the installation is successful.
Procedure
Step 1: log in the BMP_SMP slot as the usr_ins user, and enter the directory:
usr_ins@BMP_SMP:/home/usr_ins/breeze/ideploy/20120309124328.1/conf> ll
-rw-r--r-- 1 usr_ins usr_ins 26646 2012-03-09 20:53 10.77.222.157_usr_ins.properties
-rw-r--r-- 1 usr_ins usr_ins 26646 2012-03-09 20:53 config.properties
Step 2 Modify the 10.77.222.157_usr_ins.properties config.properties configuration files and set
db.X.bbdb_install_type and db.X.cdrdb_install_type=typical, and then save and exit;
Step 3 If it is still failure, please modify the tablespace:
Thats all!
After finishing the installation of CBS system, please refer to the commission documents to
start to test the CBS SMAP system.