Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Jorge E. Penagos P.
ISBN: 978-9942-02-587-6
Ao 2009
http://www.autodaewoospark.com
2
Todos los Derechos Reservados 2009 Jorge E. Penagos P.
CONSEJOS PARA USAR EL MANUAL
Te felicito por haber adquirido este manual y dejo en tus manos una
gua til, sencilla y prctica.
Atentamente,
Jorge E. Penagos P.
http://www.autodaewoospark.com
3
Todos los Derechos Reservados 2009 Jorge E. Penagos P.
NDICE
Captulo 1: Cambio de pastillas de frenos 9
1.1.- Introduccin 10
1.2.- Herramientas para el cambio de pastillas de freno 12
1.3.- Cambio de pastillas de freno en neumtico delantero izquierdo 12
1.4.- Cambio de pastillas de freno en neumtico derecho 17
3.1.- Introduccin 33
3.2.- Revisin ajuste y calibracin del freno de tambor izquierdo 33
3.3.- Revisin, ajuste y calibracin del freno de tambor derecho 38
4.1.- Introduccin 41
4.2.- Desmontaje del freno de mano 41
4.3.- Inspeccin del sistema de freno de mano 44
4.4.- Inspeccin del interruptor de freno de mano 45
4.5.- Tensado del cable del freno de mano 47
5.1.- Introduccin 50
5.2.- Herramientas necesarias 50
5.3.- Mantenimiento del distribuidor, ubicacin 51
5.4.- Desmontaje de tapa de distribuidor y rotor 52
5.5.- Limpieza y cambio de tapa de distribuidor 55
http://www.autodaewoospark.com
4
Todos los Derechos Reservados 2009 Jorge E. Penagos P.
Captulo 6.- Refrigerante (Coolant) 59
6.1.- Introduccin 60
6.2.- Proporcin agua/etilenglicol 62
6.3.- Materiales para el cambio de lquido refrigerante 63
6.4.- Cuidados al drenar el refrigerante caliente 63
6.5.- Drenaje y cambio del lquido refrigerante 63
7.1.- Introduccin 67
7.2.- Funcin de la buja 67
7.3.- Composicin de una buja 67
7.4.- Bujas para Chevrolet Spark 800/Daewoo Matiz 68
7.5.- Medicin y calibracin de holgura de las bujas 71
7.6.- Cambio de bujas 72
7.7.- Cambio de bujas BPR5EY-11(GM#:94535748) en imgenes 74
8.1.- Inyectores 76
8.2.- Limpia-inyectores en el combustible 77
8.3.- Limpieza de inyectores 78
8.4.- Desmontaje de riel de inyectores 79
8.5.- Limpieza de los inyectores y riel 79
8.6.- Pruebas con multmetro 80
8.6.1.- Prueba de inyectores con batera 81
8.7.- Mantenimiento de inyectores en imgenes 82
8.7.1.- Desconexin de la batera 82
9.1.- Introduccin 88
9.2.- Limpieza y/o cambio del filtro de aire 88
10.1.- Introduccin 92
10.2.- Cambio de filtro de gasolina 92
http://www.autodaewoospark.com
5
Todos los Derechos Reservados 2009 Jorge E. Penagos P.
GENERAL ENGINE INFORMATION 1A 11
CHECKING ENGINE FLUID LEVEL 3. Remove the oil drain plug (c) and draw oil off.
Check the engine fluid level or condition. If needed, refill
or replace the oil.
Check the engine oil level within engine normal operat-
ing temperature as follows ;
1. After stopping the engine, wait for a few minutes to
accumulate oil into the oil pan.
2. After pulling out the oil level gauge (a), check the oil
level.
3. Clean the oil level gauge and insert the gauge into
guide.
4. After pulling out the oil level gauge again, recheck the
oil level and insert the gauge into guide again.
Important: Oil level should be between MIN mark and
MAX mark.
5. If oil level is below the MIN mark, refill engine oil as
much as the demanded quantify.
D102A302
Important: If checking oil level under the engine cold
condition, oil is not accumulated into oil pan quickly and 4. After drawing oil completely, tighten the oil drain plug
correct level checking can not be performed. Therefore, to 3040 NSm (2230 lb-ft).
wait until temperature reaches the normal operating
5. Replace the oil filter using the oil filter wrench
condition and check the engine oil level.
0991547341 (d).
D Remove the air cleaner/resonator/snorkel as-
sembly.
D After removing the bolts, remove the heat
shield.
D Loosen the power steering pump cap screw and
pull the power steering hose into the front.
D Remove the oil filter.
Important: Whenever changing engine oil, replace the
oil filter. When replacing new oil filter, apply engine oil on
oil filter sealing.
D102A301
D102A305
D102A304
D102A306
SPECIFICATIONS
GENERAL SPECIFICATIONS
Application Description
Maximum Speed 144 km/h (90 mph)
Vehicle Capacity
Gradeability 0.420 tan
Minimum Turning Radius
Bore Stroke
4.5 m (14.8 ft)
68.5 72.0 mm (2.70 2.83 inch)
Displacement 796 cm3 (48.6 in3)
Compression Ratio 9.3 : 1
Maximum Power 37.5 KW (6,000 rpm)
Engine Information
Maximum Torque 68.6 NSm (50.59 lb-ft) (at 4,600 rpm)
Ignition Timing (Ignition Sequence) 5_ BTDC (132) / 10_ BTDC (132)
Air Conditioning System (ON) 1,000 50 rpm
Idle Speed
Air Conditioning System (OFF) 950 rpm
Engine Overhead Cam L3
Ignition Type
High Energy Ignition (HEI)
Distributor Optical Sensor Type
Starter
SparkPlug
Unleaded
SD 80
BPR5EY11, RN9YC4, WR8DCX
Leaded BPR5EY, RN9YC, WR8DC
Fuel Injection Type MPI
Fuel Pump Electric Motor Pump
Engine Part Type Fuel Filter Cartridge
Lubricating Type Forced Feed Type
Oil Pump Rotary Pump Type
Cooling Type Forced Water Circulation
Radiator Cross Flow
Water Pump
Thermostat
Centrifugal
Pellet Type
Air Cleaner Element Non Woven Fablic
Muffler Catalytic Converter, Closed Circuit
Battery
Engine Oil
MF
SJ Grade
Engine Part SAE 5W30, SAE 10W30, SAE 15W40
Capacity
Refrigerant Four Seasons
Engine Disassembly 3.0 L (3.17 qt)
Oil Change (Including filter) 2.7 L (2.85 qt)
Engine Oil
Oil Change (Not including filter) 2.5 L (2.64 qt)
Oil Level Gauge 1 L (1.06 qt) (MIN to MAX)
Coolant 3.8 L (4.02 qt)
Engine Information
Battery 12V35 AH, 246 CCA
Generator 65 A
Starter
Output Capacity
0.8 kW
90 133 Lph
Fuel Pump
Output Pressure 380 kPa (55.1 Psi)
Fuel Tank Capacity 35 L (9.2 gal), 38 L (10 gal)
D Maximum Power
: 51 PS (37.5 KW)
(at 6,000 rpm)
D Maximum Torque
: 7 KgSm (68.6 NSm)
(at 4,600 rpm)
D12A101A
TABLE OF CONTENTS
Description and Operation . . . . . . . . . . . . . . . . . . 1B-2 Air Filter Assembly . . . . . . . . . . . . . . . . . . . . . . . 1B-14
Engine Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-2 Air Filter Element . . . . . . . . . . . . . . . . . . . . . . . . . 1B-15
Engine Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . 1B-2 Positive Crankcase Ventilation (PCV) Hose
Cylinder Head and Valve Train . . . . . . . . . . . . . . 1B-2 and Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-15
Engine Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-3 Intake Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-16
Crankshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-3 Exhaust Manifold (Typical) . . . . . . . . . . . . . . . . . 1B-18
Connecting Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-3 Exhaust Manifold (Euro III) . . . . . . . . . . . . . . . . 1B-20
Piston, Piston Ring and Piston Pin . . . . . . . . . . . 1B-3 Timing Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-21
Timing Belt and Pulley . . . . . . . . . . . . . . . . . . . . . 1B-4 Oil Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-23
Engine Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-4 Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-24
Component Locator . . . . . . . . . . . . . . . . . . . . . . . . 1B-5 Distributor Case . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-26
Cylinder Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-5 Cylinder Head and Gasket . . . . . . . . . . . . . . . . . 1B-28
Engine Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-6 Engine Mount Damping Block . . . . . . . . . . . . . . 1B-32
Manifold & Air Flow System . . . . . . . . . . . . . . . . . 1B-7 Engine Mount Front Damping Bush . . . . . . . . . 1B-34
Timing Belt & Engine Mount . . . . . . . . . . . . . . . . 1B-8 Engine Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 1B-35
Diagnostic Information and Procedure . . . . . . . 1B-9 Unit Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-47
Compression Pressure Check . . . . . . . . . . . . . . . 1B-9 Cylinder Head and Valve Train
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-47
Oil Pressure Check . . . . . . . . . . . . . . . . . . . . . . . . 1B-9
Engine Block Components . . . . . . . . . . . . . . . . . 1B-59
Adjustment of Valve Clearance . . . . . . . . . . . . . 1B-10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-71
Ignition Timing Check and Adjustment
(Typical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-11 Engine Specifications . . . . . . . . . . . . . . . . . . . . . 1B-71
Valve Timing Check and Adjustment . . . . . . . . 1B-12 Fastener Tightening Specifications . . . . . . . . . . 1B-73
Repair Instructions . . . . . . . . . . . . . . . . . . . . . . . . 1B-14 Special Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1B-75
On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . . . . . 1B-14 Special Tools Table . . . . . . . . . . . . . . . . . . . . . . . 1B-75
http://www.autodaewoospark.com/manuales-chevrolet-spark800cc.php
Atentamente,
Jorge E. Penagos P.
http://www.autodaewoospark.com