Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DEVELOPED BY
DIACOM TRAINING
INSTRUCTIONS
Good luck in your learning and remember this book is ONLY the first step in
learning the DIACOM. Continued education to enhance your skills is
recommended for all technicians.
All data is recorded and compared to the normal Etalons signal or Biofeedback
visual picture allowing the determination of areas which may be outside of normal
parameters and which could benefit from educational training of muscular and
emotional balancing.
Disclaimers:
! The DIACOM is an energetic device that measures subtle
electrophysiological frequencies and is not a medical device intended for
diagnostic or therapeutic analysis. Anyone suspecting they need medical
attention is advised to consult their licensed medical professional.
! The DIACOM is currently distributed to Biostar Organix Healthcare
Association Members only and is for member to member use.
! The DIACOM is currently operated within business only as a teaching
device for self-use and for part of a clients personal choice to determine
their options for further medical or life style needs.
! The DIACOM cannot diagnose, treat, or cure any clients medical
condition, but merely educate the client of possible lifestyle changes.
! The DIACOM is used on a non-member of his or her own free will, and is
currently a research device. Any recommendations shown by the
equipment of potential lifestyle or supplemental options should then be
consulted with the clients practicing physician.
! All non-medical practitioners should use the terms client, frequencies,
stress reduction and imbalances when working on any client.
! The terms patient, diagnosis, treatment, therapy, frequency
balancing, and disease should be used only by a licensed medical
professional.
! Any term within the program referring to any medical condition is only
there to refer to a type of situation or possible imbalance of energy flow,
and does not mean the client has that condition, the term or verbiage is by
no way a view of the practicing therapist. Any visual pictures within the
program or this manual are pictorial representations and used to help the
technician understand how a frequency may appear in a natural state.
! This manual is intended for the use of understanding the software
andnormal device operation.
! This is one option for stress reduction.
! At the time of this printing this machine is for home use and for training
purposes by private medical association members.
! Disclosure for Distribution or Manufacture location is the responsibility of
DIACOM.
! This device has not been submitted to the FDA for review.
The content on this manual is for reference purposes and is not intended to substitute for advice
given by a physician, pharmacist, or other licensed health-care professional. You should not use
this information or any device as self-diagnosis or for treating a health problem or disease. When
you receive an item, carefully read all labels, warnings, and directions before use. Actual product
packaging and materials may contain more and/or different information than shown on this
manual. Contact your health-care provider immediately if you suspect that you have a medical
problem. Information and statements on this manual regarding any term, recommendation,
suggestion, or dietary supplements have not been evaluated by the Food and Drug
Administration, and are not intended to diagnose, treat, cure, or prevent any disease or health
condition.
TABLE OF CONTENT
Chapter 1 A word from the Company 7
Index 57
CHAPTER 1
Diacom Manufacturing
Na Dolinach 1175/33
Prague 4, Nusle 14000
Czech Republic
This is a training program for use with the nonlinear diagnostic system -
DIACOM.
DIACOM - NLS refers to an entirely new class of devices, which are called
brain ma- chines. What are they? At present, science and society in general, is
faced with information overload. Every day, there are large and small
discoveries; every year there are dozens of new machines and devices
developed. This is certainly good. However, a person begins to drown in this sea
of information, losing the big picture.
However, modern science has come very close to unraveling the phenomenon of
intuition, and even more mysterious phenomenon of clairvoyance. The point here
is that this is not a miracle or divine grace, but electromagnetic vibrations of
very low frequency, which can transmit information in the human brain,
bypassing the usual senses. Of the 10 million units of information only one is
recognized, the others are fixed in the subconscious. Information from the sphere
of the subconscious is extracted either spontaneously, or at the level of unusual,
altered states of consciousness: hypnosis, dreaming, meditation, or while
receiving psychotropic drugs.
The whole world, including the human race, is deeply interconnected through a
variety of informational signals. Thats why techniques to obtain information from
the sphere of the subconscious, are recognized, while modestly, as priorities in
the development of science and society in the next century.
The first version of a nonlinear analysis device had only a manual input of
information, which is a doctor was actively involved in the diagnosis of a patient,
through the use of low-frequency vibrations that are close to the theta rhythm of
the brain becomes more sensitive to radiation in the body of the patient. The
results were recorded using the deviation of an L-shaped frame held by the
physician-operator on Flanderss special scale (this scale is presented in the
diagnostic module of the program). However, this method of research is too
subjective and not safe for the health of the physician operator. This led to the
development and creation of a trigger sensor, providing automatic input of
information about the health of the patient in the computer. On what is the effect
of trigger sensors?
For the first time a distant effect of interaction with objects of animate and
inanimate nature, that is the transfer of data pulses from a man to machine was
registered in the experiments of V.N. Kravkov in the 20-ies of our century. Under
the guidance of prof. V. Togatova, reactions of various semiconductor structures
on the impact of bio-operators (psychic), were studied. It has been
experimentally proved that the human brain without the aid of wires can have an
affect the sensitive sensor device.
Software developers, in a dialogue mode between the telemetry complex and the
physician operator with remote biofeedback, designed for the perception of the
brain activity of the operator or patient but depending on the objectives of the
study and configuration of the complex and convert this information into a
sequence of pulses with a special trigger sensor. This is reflected in the fact that
the human brain receives a signal about the need to verify (test) this or that
organ. The signal is fed to the monitor screen, as well as the head headphones
in a series of electromagnetic waves peculiar to the healthy human body. This is
possible because every organ and every cell in the human body has its own
spectrum of electromagnetic waves. Thus we would like to ask the question -
what is going on with the target organ?
In response to the question, the brain of the subject gives an answer that is
perceived by the trigger sensors.
Graph: The scheme of terminal waves diffraction of the brain, heart and
liver
The Diacom device allows the user to work at their schedules pace, allowing re-
entry into the program for up to 24 hours. This provides a freedom of client and
personal schedule not seen with other biofeedback devices.
In the basic model, the DIACOM device offers a digital trigger sensor,
simulated directly in the microprocessor of the main unit through the computer
software and analog trigger sensor of the main research unit, junction transistor,
which increases the reliability of research.
The purpose of this training program is not a detailed physical justification of the
principles of the DIACOM device, since different devices are designed
differently.
Application
The device DIACOM-FREQ-Usb
For exact definition of a functional status and updating of the imbalances caused
by stress you should see a licensed medical doctor. The Diacom visually
displays the clients reaction to stress by:
Characteristics of NLS-Analysis
1. Power source voltage 9-12 v 500 mA
2. Start-up time and reset the buffer 5 sec
4. Sync Speed 8 MB/sec
5. Frequency of internal field 5.45-5.51 GHz
6. Light-interference resistance 4.17 W/m 2
The level of a radio noise created by the device does not exceed the values
established by the all-Union State Standard 23450-79.
The conclusion:
DIACOM-FREQ-Usb is
Recommended as sensitive, accurate and specific investigative
technology for stress
Efficient and safe for both doctors / technicians and patients / clients
Non-invasive, with no radiation
Fast to operate
Easy to use
Provides reactive response of stress using voluntary controlled
physiological parameters of the body
CHAPTER 2
PREVENTION OF PROBLEMS
If you forget to turn on your Diacom or forget to plug in the USB cable you will
see this picture stating Application anable to find diacom device and will be
closed.
Occationally the program may open even though you did not turn on the
machine, however you will not be able to pull up any existing client files.
If the headset was not put on, or not put on the correct way so that the trigger
inside the headset is not recognized, or if the headset is not plugged into the
DIACOM you will see this message Bioinductior is out of order. It will also
appear IF the client takes the headpiece off during interpretation or frequency
balancing and will stop the session instantaneously. Be sure the supplement cup
is plugged in.
If this message comes up on your screen then check the headpiece, or the
connection the Diacom box to be sure it did not come loose, then click Retry and
it will restart at the point it stopped.
Screen Size: The resolution settings required for this system are with a 5:4
aspect ratio and use may use the following settings: 1280 by 1024 pixels, and
1600 by 1280 pixels or 1024 by 768. If you are using a laptop you can change
the display settings in the control panel. Look for the display that is closer to
square than a rectangle.
If the program is already up and you cannot see the buttons correctly.
1. The DIACOM program must be closed, you may have to do a
control+alt+del to get your task manager to come up so you can do an
End Task since your Main Menu button will be visible on the bottom of
the screen for normal closure.
2. Right click on your desktop
3. Click on Properties
4. Click on top tab of Settings
5. Change the pixel size (remember that the higher the number the more
pixels on your page, think of this as little dots, which make up the picture)
6. Make your choice by using the horizontal slide bar
7. Click okay
8. Go back into the DIACOM program and see if it is correct on your page
now, if so proceed to run the program, if it is not yet correct then close and
repeat this past process until the size is correct for your computer.
No, reactions from the client must be through the headset the machine, as
such the client must be on using the machine.
The program is secured from unauthorized copying. The program can only
be installed and started with the apparatus 'DIACOM' switched on.
Then restart the Diacom for your next client or you will find that you often
have your computer freeze up between clients and the program may
refuse to open, give you an error message or lock in place and you will
have to control + alt + del to turn off the Diacom and unplug the USB to
start a new client.
Optional Equipment:
Medical grade surge protector is always advisable on electrical equipment
Printer: printing is optional for depending on liability and therapist wishes
Travel Drive or flash memory to copy client files, optional
Before transfer patient files, copy all pertaining files on the travel drive or flash
card
Remember you must have the DIACOM attached to your computer, and
headset on the head (cord on the left) when starting and boot up the
program to engage the system.
When the DIACOM program opens, click on the "Reception of Patient"
button.
At the upper left corner of the page, under the words "Card-Index-
reception by Doctor", you will find three pull-down menus: "Patient",
"Doctor" and "Options". Click on choice entitled "Options".
Then select the choice entitled "Exchange".
In the pull-down box, in the upper left hand corner of the page, select the
"To program" option.
A "Select Directory" box will appear showing the file you have created for
database storage. If the file to which the Select Directory" box opens is
not the correct file, then just browse until you find the correct database file.
Select the desired file from the old database, which has been opened, and
click the "OK" button to copy it the DIACOM's copy box, found at the upper
right side of the page.
Continue in this manner until all desired database files have been copied
to the copy box.
When all desired files have been copied to the copy box, click on the
"Copy" button (the one showing the finger pointing to the left), found at the
upper, middle, right hand portion of the page.
A message box showing the words "Researches transferred to program
successfully" will appear and the retrieved files will show in the "Name and
Age" box, on the mid left side of the page.
The retrieved files are now ready for use in the DIACOM program.
Why? Because if the file gets corrupted you may need to reinstall the program to
insure quality of interpretation. Be sure you have backed up your client files in a
new empty folder, because deleting the file will remove all client data. Updating
your program with a newer version will also require deleting the old program.
How? It is now simple, put in your new disk, or the old one if you have a current
problem and when you follow the installation instructions you may choose to
Update, repair, or remove. It no longer requires a separate uninstall/removal
disk.
Transportation of my DIACOM
The warranty period of the Diacom device box, with observance of normal
operating conditions, storage, and transportation by the consumer, is 36-months
from the date of delivery of apparatus. Ownership may be transferred within that
36-month period; please contact the company to make sure this change of
warranty is done to ensure coverage.
During this warranty period the manufacturer repairs the product are free of
charge.
The warranty loses its force if the product becomes floor sample, as the result of
casual damages (damage caused by a customer, animals, insects, or general
misuse), damages caused by water and other liquids, as well as by instability of a
power supply network, or acts of nature.
CHAPTER 3
Set up
Your package should come with all the equipment ordered for your specific
machine. For the DIACOM NLS this will include the DIACOM box, the headset,
and a supplement cup for homeopathic supplements, and a loading program disk
(optional) although your program may be loaded through an automated loading
system from the company via the Internet. There may also be other disks
included for your learning experience; these may also be available via the
Internet.
To assemble your equipment plug the cords in the holes that are marked for
them in the back of the Diacom box. You will notice they all look different. The
only switch, used is on the back of the Diacom box and is the on/off toggle
switch.
1. Power Switch
2. Power cord connection jack
3. USB connection
4. Product testing cup connection jack
5. Headset connection jack
6. Top row of hand electrode
connectors*
1 2 3 4 5 6* 7* 7. Bottom row of foot electrode
connectors*
Newer Connectors may be
different than depicted.
Loading your program is normally a simple procedure, and you can install it on
numerous computers for ease of use, as this equipment does not require access
codes, however only one computer will function at a time, since activation
requires the actual Diacom box to be attached. However, the computer program
does require the access code, so be sure that you have gone to the Diacom site
to activate your computer.
Occasionally, your computer will not recognize the port you have chosen for your
USB port. You will find that when you load your program only the port you first
use to install the USB will recognize it after that time. However, should you run
into a problem opening your program, when you have put your USB into the
proper slot, see the step-by-step procedure in the previous chapter under
technical problems.
Once you have everything together and put the USB into your computer port you
simply turn on your computer and then turn on the power switch to your
DIACOM. Place the headset on so that the cord is on the left, THE
HEADSET MUST BE ON FOR THE PROGRAM TO OPEN AND RUN.
Double click on the DIACOM desktop icon and your machine should come up
and be ready for use.
This device is extremely easy and should take you into this page asking for
Reception of Patients/Clients, which is the entrance to the DIACOM or the
Main Menu, just click on Reception of Patients.
Should you miss a step in the opening procedures you will find it reminds you
along the way with easily understood statements, as below. This one comes up
should you forget to turn the switch on to your machine.
At this time, should you see this, turn on your DIACOM device and then click no
(the yes will not at this time take you in) and then reopen the DIACOM on your
desktop.
Instruction for the Electrode connectors (number 6 & 7) are not in this manual
and will be instructed at an advanced training for licensed or certified personnel
only.
REMEMBER THAT AT THE END OF EACH CLIENT YOU MUST EXIT ALL
THE WAY OUT OF THE PROBRAM, THROUGH THIS ENTRY PAGE,
CLICKING EXIT. TURN OFF THE BOX AND UNPLUG THE USB PORT,
REPLUG THE USB, AND TURN THE BOX BACK ON BEFORE YOU RE-
ENTER FOR YOUR NEXT CLIENT FROM THE DESKTOP. THIS PREVENTS
FILE CORRUPTION.
If the headset was NOT put on or not plugged into the machine you will see this
Bioinductor is out of order message. It will also appear IF the client takes the
headpiece off during interpretation or frequency rebalancing and will stop the
interpretation/rebalancing instantaneously.
If this message comes up then try to fix the headpiece, or check the connection
to be sure it did not come loose, then click Retry and it will restart at the point it
stopped. If it did not and you are sure the device is switched on you may need to
shut the Diacom and then unplug the USB from your computer. After shutting
down replug the USB and then switch on the box, and then double click the
Diacom icon to restart the program.
Typically you will find the, Application unable to find Diacom device and will be
closed if the Diacom device was not attached properly and see the following
message:
This is the message you will get should you forget to plug in your USB into your
computer. Be sure you know which USB outlet you loaded it originally, as that
can make a difference to some computers. If the message comes up and the
key is in the correct port, recheck to be sure no wires on your computer came
loose, because any kind of unreadable connection to your machine may make
the computer not recognize the hardware.
If this message comes up and all ports are connected tightly and properly, you
have checked to make sure the USB is in the correct port and still it does not
read correctly, call technical support. If this message came up the first time you
went to get into your DIACOM then see the technical support section of this
manual on how to designate the USB port.
Using the hammer and wrench symbol opens the parameter box. On the
Selected Groups category place checkmarks next to those areas, which, you
would like, further information at a later time in your session on the List of Group
of Standards Page.
TERMS
Anamnesis = complaints, self reported health history
Auto Tune = computer chooses automatically, but can be interrupted
Detail = enables you to evaluate the structure of ALL body tissues on histological,
cytological or genetic levels or formation, which may be important to high quality
scientific research, or more difficult clients with conditions which dont make
sense to the normal diagnostic measures.
Elation Object = is deeper than CDE only and is an advanced level.
Elalon = an optical instrument with two plane parallel reflecting surfaces, used
for the precise measurement of distance or the wavelength of light.
Evaluate Fragment= For enlarging the area to view and interpret within 1 panel,
many are not available.
Express = Short version- is to carry out investigations on the full topographic
sections without anatomical or histological details (particularization).
Localize = To do smaller area more specialized by a square or circular area.
Mega Test = Vegeto-test
Meta Therapy balancing also called Meta-Frequency
Nidus = stress factors
NIVIS = Particular spot or Foci
Organ specific = Sarcodes
Standard = enables you to study separate individual histological or genetic
structures, provided they have pathological changes and only when available.
Stealth = Computer chooses but shows you list to add to before you manually hit
start
User = Allows a duplicate session run from one visit to the following visit on the
same client.
Now for the first drop down and starting your clients.
NEW CLIENT
This is the Card File panel you will see when you first get this machine.
Because the first 14 clients on file are displayed it is advised to make several
fake clients in the As so that only these files are visible.
You will first see the last client information in the middle of the panel.
To put your first client in you may wish to make up a names like Aaaron Aa
(notice it has 3 As in a row, plus the first initials of Aa, should you have other real
clients with that name it will force this file to the front) because this panel will
always show your 1st client in your data base when you bring up the screen, so
for client confidentiality the imaginary A. client files will protect you and your
clients confidentiality.
Now to start your first real client file Click on Client File and the dropdown will
come down with the options of New, Delete card, Delete by date. Click on NEW.
For a faster method of entry, click on the small group picture to take you directly
to the new client card.
The choice of putting a name in by first or last name is a therapist choice, but
whichever you choose, keep it consistent. I put in last name first because so
many people use nick names and I find it easier to look up last names.
The Age is their current age at the date of their first visit. Male/Female, be sure
that the male/female is correct because it will designate which types of panels
the computer goes through for interpretation. If you forget to do this then a
message box will come up saying No Age. Highlight the year and retype the
correct birth year, this will bring up the current month and year calendar which
will make selection of the correct birthday easier, you may also type in the correct
date, however most of us do not know what day of the week that birth date links,
and so the date will automatically give you the day.
Address: if you plan to use these files for contacting or mailing your clients then
fill in the address. This also can be a preventative if you have two clients with the
same names, even then they can have the same age. (Optional use)
Upon completion of this panel you will click OK which will take you automatically
to the Anamnesis panel (discussed shortly). This location allows your client
some choice in centering in on locations of concern, and although it does not
override the computers choices for interpretations it will add to them.
RETURN VISITS
When a client returns the same day or another visit in the future all you have to
do is click on this empty line (below Search by name) and start typing in their
name, as it finds suitable matches it will show them in the middle panel (left),
even typing just the letter J would bring up every person with a J in their name
(within the first part of the name) Ji would bring up those in the list with Ji and
reduce the search. Typing Jim would have further narrowed the options. If the
name were visable on the screen, you could simply click on the name to bring up
that client. At this point all you have to do is choose Control if it is to begin the
next session on this client on a new day. Notice at this point the New patient,
Delete patient, Research, Delete research, Analysis, Analysis +, VEGETO test,
Preparation and Exit are all in Blue allowing these options for the person you
have typed into the box.
NOTICE THE LIST OF BLUE, RED, OR BLACK, SYMBOLS on the card file.
This shows the different colors depending on the functional state, after the scan
has been run from earlier visits, as well as the date and time of the appointment
where these were run. Each portrays a different function which will be discussed
in this training.
Blue symbol shows no pronounced functional changes in evidence
Red symbol shows minor functional changes
Black symbol shows pronounced functional changes
Again simply start to type in the name and it will bring up the closest person to
that spelling.
ANAMNESIS
This is a location to point out health history concerns for doctors or therapists.
This location allows the client to provide more interaction to the therapist allowing
client-technician interaction. Recommendation is 1 to 5 complaints/concerns,
once these original spots are checked they will still show up as an issue at future
visits (a reminder of what the first appointment was like), however, at the next
appointment they should provide more current information on the new issues of
concern, older checkmarks may be removed and new checks put on in place.
To help with the areas that a client wishes to address by frequency imbalances
within this program click on one of the dots; you will notice that the right shoulder
(left side of the picture) always has the green dot on it to start. Once you click
the area you want you click on as many of the list of the right as you wish that are
pertinent, you will see the dots change from red to green as you choose them.
After this you can click on another area of the body. Part of educating the body
for stress reduction is the mental connection made by the client to their issues,
this allows the client to voluntarily control physiological parameters of the body.
You will notice this list is for complaints, which is one of the three choices above.
Complaint offers the choice by issue. To add items not in this list click on
Diagnosis.
done by technicians, using the information from the client, from pre-diagnosed
conditions from their licensed medical doctors.
This list can also be clicked on for one or more issues. There are four options for
Research Study: (1) Express, (2) Standard, (3) Detail, and (4) User.
Express = This is the shortest version; it is to carry out investigations on the full
topographic sections without anatomical or histological details (particularization).
Standard = enables you to study separate individual histological or genetic
structures, provided they have pathological changes and only when available.
Detail = enables you to evaluate the structure of ALL body tissues on
histological, cytological or genetic levels or formation, which may be important to
high quality scientific research, or more difficult clients with conditions which dont
make sense to the normal diagnostic measures. User = Allows a duplicate
session run from one visit to the following visit on the same client.
Once you have determined your type of research study (i.e. I have mine set for
Express unless I manually change this) you will find that check marks will appear
on the A Base Category. Before you continue to do any analysis, you have an
option at this point to go through the long list of systems and check areas of
personal concern. It may be advisable to include the Intestine panel (listed in
group B Digestive System), to determine if supplementation is easily absorbed
since a disruption in this area may cause a concern.
The Analysis radio button takes you to the analysis panel to begin the scan,
remember you may return to this Anamnesis panel at any time during the scan
and therapies, to add to the current list. Clicking Analysis, takes us back to our
original Client page; click Analysis.
The Diacom NLS has become extremely user friendly, only a few panels are
necessary for you to learn. Opening these can be done directly from your main
screen upon finishing your Anamnesis. Many of these optional buttons will also
be within the other panels you are entering, allowing you to work directly from
that page without coming back to this main screen. Both options work well.
There are 10 panels you will become very familiar with.
If at any time you wish to go back to the Anamnesis page to use the tab Organs
you can click on Research and you can easily return back for additional
specifications.
PANEL 1: SCAN
Scanning will begin directly after clicking Analysis in the Anamnesis page. When
the scan begins the first item you will notice there is only the first item in the list
and no S symbol has appeared to the left of the word Labyrinth in the white
box. This will change as the items that were checked in the Anamnesis page are
analyzed. On the bottom right are 6 colored symbols; number 1 represents very
health tissue, while levels two and three are also health, but progressing toward
stress, level four with its down arrow begins showing stress of concern, and
levels five and six become even further stressed. These are our six levels of
stress which will pictorially display on the scanned organ / sarcode pictures. The
picture in the bottom left corner displays the blue N line of expected reaction
while the red S line shows how this particular persons reactions compare to the
anticipated line.
Upon completion of the first scan a box with an S appears as does the other
items to be scanned in the white box on the left and the next item in the list
begins the scan/analysis process. There is a pause button on the bottom of the
page should you wish to stop this analysis for any reason, and then use the blue
Exit button to return to the original client page.
Your list builds and fills in with colored icons to the left after each scan/analysis is
complete. Each will have a decorative S (standing for scan) inside a blue, red
or black box when the independent scans are done, depending on the level of
involvement of that organ or sarcode. When any of your scanning for frequency
imbalances is done, you will see this message Research done, at this time you
determine if you wish to add more or begin your therapies and investigation. We
will follow the picture of the Labyrinth through most of the 10 panels to give you
an idea what each would look like for this picture.
This is the connection to the Analysis Panel and what is known as the Group List
page for that organ at this time; you can also do this in step Analysis.
If you plan to utilize the Preparation from this location rather than for the organ as
a whole or when comparing the organ to a supplement you may do so at this
time. You may also test a supplement to a symptomology listed on this page by
using the VEGETOtest (discussed in Panel 8). When using this panel first click
the topic (suggested to only do one at a time) within the left column, then the
Arrange All on the bottom right. Next highlight the item you plan to look at with
any of the buttons on the upper right. If the number in the middle column is
below the whole number 1, it is pertinent to look at today. It is suggested before
you close out your client you come back into this page and remove any checks in
the left column so that each client is observed independently.
After you run the Localization a new line will appear in your list with a L to the
left of the name Labyrinth standing for localization. You may now do your Meta
Therapy (Panel 4) for rebalancing pathogenitic stress and items of the
Analysis/Localization page.
If you try to get back into this item by clicking on the L the Localization button will
gray out, but he Meta Therapy button will be blue.
The main rebalancing panels for the Diacom NLS for outside influences and
pathogens. When you open this panel place your cursor in the center of the
page or in an area of higher stress and click one time, this will place the starting
point of the circle scan. Decide how many times you want this to run, the
recommended amount are 3 times (3x), less than this and the DC therapy often
will not open to run (button turn blue). The sliding bar is to control speed for your
computer, should your computer be very high speed you may wish to adjust this
back to attempt to change the level 1-6 shapes easier. If your computer is slower
you may wish to speed the scan radius up. Click Load to begin the scan. You
will see as you watch this on your computer that the shapes will change normally
toward a less stressed shape. When it finishes the first scan it will automatically
go to the 2nd and then 3rd scan (if you placed this at 3x). When it is complete you
will see on the main page how many scans were done and the scans will be
listed again by time of day and by the letter M for Meta therapy at the bottom of
the days list.
Notice on the list the three Ms which state Labyrinth and the procession of time
of day. Also notice that the DC Therapy button is now blue for entry into
rebalancing the organ/sarcode specific. Be sure to highlight the most current
dated time with the M and then choose the DC therapy (Panel 5).
This panel shows an excellent depiction of the 6 levels of stress you might see
when doing a test or therapy. Notice on the upper left corner in darker blue it
states Meta Therapy and lists the organ being worked on when the stress levels
are at level 4 and 5.
PANEL 5: DC THERAPY
The DC Therapy button (main therapy page and Scan page) only turns to blue to
allow entry after enough rebalancing has happened in the outside influence area
of the Meta-therapy section. This normally takes two or three (usually three in
more systematic cases) times through on the Meta Therapy to enter the DC
Therapy where we are attempting to help the body rebalance the stress of the
organ. The Meta-Therapy and DC Therapies are not the same and are intended
to be complementary balancing processes.
Once you highlight the last Meta-Therapy line (be sure to look for the most
current time) the DC option should be blue and ready for you to activate. This
will only be necessary to run one time.
You will now see a D to the left on the list of organs showing the completion of
the DC Therapy, notice it has now turned gray prohibiting return access.
There are three primary uses for this Analysis + page: 1) You can utilize this for
comparing a supplement to an area of stress (discussed in Panel 8), for this
purpose you would look at the original S and use the VEGETO test and then
come to this panel to compare; looking for improvement signs or areas of
weakness relevant to the use of a supplement to this area. 2) You may use this
panel to compare todays scan with a scan from any past appointment. Simply
click the item within the list you wish to compare with today. 3) You may use this
panel to compare your first scan of this session with the last process you
preformed (whether it be Meta therapy or DC therapy) again you are looking at
items which show improvement in frequency or get worse.
Although you will see the color changes on the two pictures to the left, it is
easiest to click the button Improvement or Get Worse for the larger picture
below. The items, which changed, will be flashing.
PANEL 7: PREPARATION
By placing an item of water, paraffin, crystal, or carrier water with alcohol (100
proof food grade) on or within the testing cup we can create a homeopathic of an
item of choice within the Analysis panel list or by putting a supplement (possibly
that causes an allergic reaction in real form, but not in homeopathic form for the
client) onto the supplement cup. If you plan to make a homeopathic it is
important to study on Homeopathics first, so that you are aware when to
duplicate and when to invert the main item. Most carriers with alcohol use a
small brown or blue bottle to protect the homeopathic from light, and place 10
drops of food grade 100 proof alcohols such as vodka into the bottle of distilled
water. Place the item to be transferred from the Analysis page (which has been
highlighted into the test tray and load. The process will run until complete. If you
do this after the VEGETO test, you will run this from the main or list page rather
than the Analysis page that you opened to get an item from that list.
PANEL 8: VETETO-TEST
Again there are two ways to run this. It is accessible within the Analysis page, to
compare a supplement to the pathogen you have highlighted. Simply highlight
and click VEGETOtest. The second location on the list or main page will bring up
the following box:
Type the name into the line and click OK, upon completion you can enter the
Analysis plus, to see how the supplement compared to the organ you had
highlighted (normally prior to any therapy in the S listing).
The new letter D will be present on the list for the item used to do VEGETO
test. On this picture below it is highlighted in the blue line.
PANEL 9: TEXT
Shows icons to link for descriptors. Many pictures may be confusing, especially
to new technicians who do not know all of the small locations within a picture. To
help with this click on Text in any of your visual panels, the sarcode picture will
appear with small circles with a + in the middle. Click any one of these to see the
location that that circle represents.
Icons are placed on the object, which like to other organs, tissue, cell, vessels, or
further pictures of more detail on this object. Clicking on any one will take you to
that panel, and if it is not already scanned, it will scan the area and put the new
scan representation in the list for further access or therapy. In this case by
clicking Pictogram we see the larger picture of the eye.
Clicking the icon within the eye opened and scanned the next picture of the
Eyeground, right and will place the 6 levels of stress on this new slide to see if
and how it links to the earlier picture.
The next panel displays the issues after the analysis of this slide within the small
box on the left.
When you determine it is time to finish this session and close all panels back to
the original client screen you will be asked.
Answer yes to go back to your desktop. Remember you can go back into this
client and continue working on other areas anytime until Midnight of the same
day, without having to do redo the entry scans.
REMEMBER THAT AT THE END OF EACH CLIENT YOU MUST EXIT ALL
THE WAY OUT OF THE PROGRAM THROUGH EACH PAGE; AND RE-
ENTER FOR YOUR NEXT CLIENT FROM THE DESKTOP. THIS PREVENTS
FILE CORRUPTION.
PROCESS A: Little time used to just go into the therapies and rebalance
Step 2 ANALYSIS radio button (Looking at relevant frequency lists and top
pathogens) FOR SUPPLEMENTATION SUGGESTIONS. Specific to a set
slide choice in the Anamnesis page.
1. Click item with red dot (Polling Page -main interpretation page), choose
items of concern.
2. Open Organ tab: Uncheck any items you are not wanting scanned today
3. Click slides of concern (under Organ tab), these are no the only ones
checked
4. Click Analysis (upper right which starts the scan of those specific issues)
5. Click Analysis (organ list of competed scan)
6. Click C, D & E (upper Left) or any one at a time.
7. Arrange All (lower Right)
8. Click area of concern (any area below the number 1, i.e. .076 - definition is
on the bottom left side)
9. Click Entropy Analysis (Right)
10. Click Exit (on graph page Bottom Right)
11. The higher the number in the middle column are more involved in the past
(0-9)
12. Issues below 1 (i.e. 0.135) are relevant today (2nd column) compare to 1st
column to see progression.
13. Invert or Preparation: (optional)
14. Exit You now have ideas of systemic or non-systemic involvement for
outside supplementation.
CHAPTER 4
OFFICE FORMS
This form is utilized to help the client understand potential stressors to the body.
Please check any stressors that apply in which you wish to discuss
potential lifestyle changes (optional).
Toxic Exposures:
____ Beauty shop toxins or similar
____ Asbestos from shipping, industry, insulation, etc.
____ Insecticides, herbicides, industrial farm chemicals
____ Heavy metals
____ Food additives
____ Radiation
____ Chorine or fluoride sensitivity
____ Environmental toxins of water and air pollution
____ Exposure to infections
1. I fully understand that the attending technician is not an allopathic practitioner (MD) and does not
portray his/her self to be one, but is a wellness consultant and Bio-Feedback technician.
2. I fully understand the difference between the practice of allopathic (conventional) medicine,
nutritional wellness consulting, and Bio-Feedback.
3. I fully understand that the services provided by the attending technician are not allopathic, but are
strictly behavioral, stress or Bio-feedback in nature.
4. Any reference to patient within this Frequency balancing is solely due to the technical terminology
within the DIACOM program and in no way implies that the client is a medical patient.
5. I fully understand that the attending technician performs his/her services within the parameters of a
natural health care and wellness system using Bio-Feedback and stress reduction.
6. I fully understand that the attending technician does not offer allopathic drugs, surgery, chemical
stimulants, radiation, Frequency balancing, or any other conventional treatments. In addition, he/she
does not diagnose, treat, or otherwise prescribe for any disease, condition, or illness, and that my
wellness and stress parameters are being measured.
7. I have solicited the attending Bio-Feedback technicians services in good faith, exercising my free will
and following the dictates of my own conscience which allows me to select what I understand is most
beneficial to my health.
8. I also exercise my free will in asking this business and technician for their opinion on items and
situations which may expedite my good health; it is my choice should I accept to utilize or apply any
of those ideas or suggestions at any time.
9. If I desire any services not provided by the attending Bio-Feedback technician, which is my
prerogative, I fully understand that I should seek them elsewhere. A referral for such services can be
arranged.
10. I presently seek counsel, advise, opinions, Bio-feedback or points of view and/or programs within the
scope of the attending technicians wellness and stress reduction practice. I am fully aware and release
the Bio-feedback technician to do Bio-feedback stress interpretations and frequency balancing.
11. I fully understand that the services provided by the attending technician are not generally accepted
and/or recommended by allopathic doctors (MDs) or other conventional health care professionals. I
realize that insurance payment may be possible, but is highly unlikely.
12. I understand that payment is expected at the time of service, unless otherwise arranged prior to my
scan.
13. I understand that I must call and cancel an appointment at least 6 hours prior to my scheduled
appointment time. If I do not show up for an scheduled appointment I will be charged full rate for
that time.
14. By signing below I acknowledge that I have read and understand all parts of this waiver and that I
have had the opportunity to ask any questions with regard to all such procedures.
15. The Food and Drug Administration have not evaluated these statements. This product is not
intended to diagnose, treat, cure or prevent any disease.
16. I understand that is my responsibility to present myself when observing or participating this session,
when employed by the FDA or any other governmental agency.
INDEX
Index