Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
QA
Number: 1z0-482
Passing Score: 800
Time Limit: 120 min
File Version: 32.1
http://www.gratisexam.com/
1z0-241
PeopleSoft Application Developer I: PeopleTools & PeopleCode
Best ever training material, It's really helps you to maximize the exam preparation.
Excellent Questions, I pass with 90% with these questions. Guys just read this only.
Thanks a lot for this. I have been looking into getting certified and this was exactly what I needed.
The credit of my success however actually goes to this brain dump study material that sharpened my knowledge and provided me practical exposure through
practice test Questions.
There is surely no other source better than this.
Best of Luck :)
http://www.gratisexam.com/
http://www.gratisexam.com/
Exam A
QUESTION 1
In an ODI interface, to declare a lookup, is there a dedicated graphical object?
A.
B.
C.
D.
No, in ODI you can declare a lookup only using a join definition.
No, in ODI you can declare a lookup only using an ODI procedure.
Yes, there is a specific object, you click it and a wizard helps the developer to set the lookup.
Yes, there is a specific object and you need to prepare a configuration file to use it.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
Select the three correct options for Token Checking in the EDQ parser.
A.
B.
C.
D.
E.
http://www.gratisexam.com/
C. Yes, but you need to use as mandatory Oracle BPEL in order to process the job invocation.
D. No, there are only internal specific application program interfaces that you can use to run a job.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 4
You are designing a Load Plan in which you need to run Interfaces A and B one after the other while running Interface C at the same time. Which steps do you
need to follow to achieve this?
http://www.gratisexam.com/
A.
B.
C.
D.
Add a Parallel step, add two Serial steps underneath it, and then add A and B to one serial step and C to the other one
Add a Parallel step, drag A and B and C into the Parallel step
Add aParallel step, add two Parallel steps underneath it, and then add A and B to one Parallel step and C to the other one
Add a Parallel step, add three serial steps underneath it, and then add A to the first Serial step, to the second one, and then C to the last one
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 5
When profiling data with EDQ, how can you ensure that the latest data is being used?
A. By creating a snapshot
B. By refreshing a snapshot by running it
http://www.gratisexam.com/
http://www.gratisexam.com/
A.
B.
C.
D.
Yes, business rules and the physical implementation are strictly interlayed in ODI.
Yes, a customization is needed only for aggregation functions.
No, aggregation code is generated automatically by ODI according to the mapping logic rules.
No, it is not needed but, a variable must be declared in the source mapping in order to generate the correct sum.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 7
Which tables store ODI/OBIEE lineage information?
A. Master repository tables
http://www.gratisexam.com/
Yes, and also specify with variables the passwords for connecting to the data contained in the servers.
No, the code will be black box-generated directly by ODI.
No, ODI automatically designs the flow and how servers are connected.
In the ODI interface palette, choose the more convenient graphic objects to link the involved servers.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Super Valid.
QUESTION 9
Is it possible to monitor a JEE Agent using a plug in directly into Enterprise Manager Fusion Middleware Control Console?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
http://www.gratisexam.com/
QUESTION 10
What is a relationship in a matching process?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 11
One of the parameters retrieve column properties in a knowledge module is odiRef.getcolList.
What is the name of the parameter that retrieves the datatype of a mapped target column?
A.
B.
C.
D.
DEST_DT
SOURCE_DT
COL_DESC
COL_FORMAT
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://gerardnico.com/doc/odi/webhelp/en/ref_api/getcollist.html
QUESTION 12
Select two infrastructure components that can be used to deploy both ODI and EDQ components.
A. JDeveloper
http://www.gratisexam.com/
http://www.gratisexam.com/
A.
B.
C.
D.
E.
There are separate attributes for Titles, Forenames, and Family names, but the values are not always in the right fields.
Names are well-structured, but the Gender field is often missing.
The data contains product descriptions in the string field and you need to extract the size and weight of each product.
Addresses are contained in a single string field and are difficult to verify.
Phone numbers are sometimes embedded in the customer name and address.
http://www.gratisexam.com/
QUESTION 14
The ODI application adapter for Hadoop______.
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 15
Select the correct statement. When running an interface in ODI, is it possible to see a simu-lation of the code?
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm
QUESTION 16
Which property file parameter stores the location of the OBBIE web catalog folder?
A.
B.
C.
D.
OBIEE_WEBCAT_FOLDER_TO_EXPORT
OBIEE_WEBCAT_EXPORT_FILE
OBIEE_WEBCAT__FILE
OBXEE WEBCAT
http://www.gratisexam.com/
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
OBIEE_WEBCAT Location of the Web Catalog folder used by the BI Server. OBIEE_WEBCAT_EXPORT_FILE Location of the OBIEE Web catalog report used for
refreshing the lineage.
OBIEE_WEBCAT_FOLDER_TO_EXPORT The Web Catalog folder to export in the report
reference http://docs.oracle.com/cd/E25054_01/integrate.1111/e12644/biee_lineage.htm
QUESTION 17
In an ODI Interface, when defining a join, can you always choose "Ordered Join Syntax"?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 18
Prior to executing an interface or mapping in ODI, do you have to deploy the generated code manually in a source or target server?
A. Yes, you have to copy all the procedures generated into the development, test, and production servers.
B. No, ODI prepares a package for the development environment.
C. Yes, you have to compile the generated code and then double-check if the code prepared for the development server is the same as the code for the
production server.
D. No, ODI Agent coordinates the execution of the commands prepared for the job, and executes them on the correct server.
Correct Answer: D
Section: (none)
Explanation
http://www.gratisexam.com/
Explanation/Reference:
QUESTION 19
Identify two operations that can be achieved using the ODI SDK.
http://www.gratisexam.com/
A.
B.
C.
D.
Create users
Create interfaces
Create Master and Work repositories
Create security profiles
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://oracle-dba.yoga-supreme.com/?p=1698
QUESTION 20
Is it possible to define more than one physical schema associated with the same data server?
A.
B.
C.
D.
Yes, but you have to flag which one is the default physical schema.
Yes, but it is mandatory to specify a different user to log in.
It is possible,but it is better to avoid doing so because it is more difficult to define a logical schema this way.
No, ODI Topology does not allow defining more than one physical schema for a data server because the associated logical schema would be ambiguous.
Correct Answer: A
Section: (none)
Explanation
http://www.gratisexam.com/
Explanation/Reference:
QUESTION 21
In an ODI interface, is it possible to use a specific partition if it is declared for the target table to load data?
A.
B.
C.
D.
No, only generic loading can be declared and an IKM can declare partitions using options.
No, only ODI variables can be used to filter the target table loading.
Yes,an option in the interface can be used to declare partitions but an ODI variable must be used to evaluate the correct partition value.
Yes, an option in the interface can be used to declare the partition that has to be used for the loading.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 22
Select the correct statement- When an ODI interface is designed, target and source tables are defined with metadata imported directly from databases and other
sources.
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 23
You design a Package with Interfaces that will be consuming data from Journalized datastores in the Consistent Set CDC mode. Identify the right set of steps that
need to be performed at the beginning of your Package to develop this.
http://www.gratisexam.com/
A.
B.
C.
D.
AddDatastores to Package, set Datastores steps to Journalizing Datastore, and select the Unlock Subscriber and Purge Journal check boxes
Add Model to Package, set Model step to Journalizing Model, and select the Extend Window and Lock Subscriber check boxes
Add Datastores to Package, set Datastores steps to Journalizing Datastore, and select the Extend Window and Lock Subscriber check boxes
Add Sub-modelto Package, set Sub-model step to Journalizing Sub-model, and select the Extend Window and Lock Subscriber check boxes
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://docs.oracle.com/cd/E14571_01/integrate.1111/e12643/data_capture.htm#autoId10
QUESTION 24
In an ODI Interface, can filters be added automatically?
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Corrected.
QUESTION 25
Your Package logic requires you to retrieve the status of the previous Package step into a variable. How do you implement this?
A.
B.
C.
D.
Create a variable, use odiRef. getPrevsteptog ()in the SQL query in its Refreshing tab, and add a variable as a Refresh Variable step into Package
Create a variable, use odiRef.getinfooin the SQL query in its Refreshing tab, and add a variable as a Refresh Variable step into Package
Create a variable, use odiRef.getStep()in the SQL query in its Refreshing tab; and add a variable as a Refresh Variable step into Package
Create a variable, use odiRef .getPrevstepstatus ()in the SQL query in its Refreshing tab, and add a variable as a Refresh Variable step into Package
Correct Answer: A
Section: (none)
http://www.gratisexam.com/
Explanation
Explanation/Reference:
QUESTION 26
Select the correct statement in an ODI interface, each column of the target can have at most, one mapping in a given dataset.
A.
B.
C.
D.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 27
Identify the database view ODI uses when loading the journalized data in an Interface.
http://www.gratisexam.com/
A.
B.
C.
D.
JV$D view
T$ view
JV$ view
JV$I view
Correct Answer: C
Section: (none)
Explanation
http://www.gratisexam.com/
Explanation/Reference:
QUESTION 28
In an ODI interface, can source tables be declared as not joined?
A.
B.
C.
D.
Yes, ODI generates the code calculating a sample of the data, profiling it, and deciding automatically if a join exists.
Yes, it is possible to create an ODI procedure to declare joins for the source tables.
No, in ODI, it is mandatory that all the source data stores are joined directly or indirectly.
No, by default, every added data store in the source declaration of an interface is joined with an inner join.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 29
In ODI, when you add a column definition in a table, can you also use a technology-specific datatype for it?
A.
B.
C.
D.
Yes, it is possible to declare it, and if the desired datatype is not in the list available, you can also add it into a Topology datatypes definition.
Yes, it is possible to declare it but only if it is a standard SQL datatype.
Yes, it is possible but in any case, you need to forward-engineer the datatype via the JDBC driver.
No, datatypes are assigned by default as string variables.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 30
In ODI, is it possible to reverse a COBOL flat file using a Copybook definition?
A. Yes, only using the file driver
B. Yes, using the file and complex file drivers
http://www.gratisexam.com/
No, it is only possible to see code in the first higher level (the session) represented.
Yes, all generated code can be viewed together in the step-level, with a complete list of executed code.
Yes, depending on the auditlevel declared when running the execution, some of the generated code at the step-level can be viewed.
No, it is possible to view code in the thud level(the tasklevel)represented.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 32
You have to load three tables A, B, and C in parallel, wait for them to be loaded, and then load a fourth table D. Which steps do you have to go through in order to
do this?
A. Generate three scenarios to load A, B, and C, add them to a Package, set their Synchronization mode to Asynchronous, use an OdiWaitForChildSession step
before adding an Interface to load D
B. Generate three scenarios to load A, B, and C, add them to a package, set their Synchronization mode to Synchronous, use an OdiWaitForChildSession step
before adding an interface to load D
C. Add three Interfaces to load A, B, and C to a package, use an OdiWaitForChildSession step before adding another Interface to load D
D. Generate three scenarios to load A, B, and C, add them to a package, use an OdiWaitForChildSession step before adding an Interface to load D
Correct Answer: A
Section: (none)
Explanation
http://www.gratisexam.com/
Explanation/Reference:
QUESTION 33
Is it possible to manage five metadata work repositories together with ODI and a single master repository in order to have a software lifecycle generation respecting
the best practices that my company uses?
A. No, every repository needs as mandatory a related separated master repository.
B. No, unless I also have live data environments because it is mandatory that the production work repository is installed on the data production server, the test
work repository on the test data server and so on.
C. Yes, it is possible to create separate metadata environments with work repositories, that define for instance, a current level of development work repository,
next level development, maintenance, production, and so on.
D. Yes, but also install a mandatory agent for every work repository and compile all its Java archives separately.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 34
You are running a Scenario in a Load Plan using a Run Scenario step. This scenario contains the Interfaces. In case of failure in this Scenario, you would like to
restart the Interface that failed beginning. Which Restart Type option do you need to pick for the Run Scenario step?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://docs.oracle.com/cd/E38317_01/doc.11117/e37987/manageloadplans.htm#CIHJCBHJ
QUESTION 35
http://www.gratisexam.com/
Designer Navigator
Operator Navigator
Command line
Nowhere, scenarios cannot be edited
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
"The scenario code (the language generated) is frozen, and all subsequent modifications of the components which contributed to creating it will not change it in any
way"
http://docs.oracle.com/cd/E23943_01/integrate.1111/e12643/scenarios.htm
QUESTION 36
A step in the Package you are designing should not appear in the ODI logs. How do you implement this?
A.
B.
C.
D.
Schedule periodically a scenario that uses OdiPurgeLog to remove those steps from the ODI logs
In the Package Editor, click the step, go to the Advanced tab, and set Log Steps in the Journal to Never
Modify the Operator Navigator settings to disable that step from being displayed
Right-click the step in Package Editor and select the No Logging menu item
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 37
In an ODI package, is it possible to use a tool to purge logs based on the name of the agent that executed the session?
A. No, it is only possible to purge the logs of the sessions that run in a specific period of time.
B. No, it is only possible to purge the logs of the properly ended sessions.
C. Yes, it is possible but you also need to indicate the ODI user that ran the session.
http://www.gratisexam.com/
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 39
What is a Load Plan?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
http://www.gratisexam.com/
QUESTION 40
Can a project in ODI contain a user function to translate commands with different syntax for different technologies but with the same functionality?
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 41
Select the statement that best describes the difference between Server and Client Data Store access.
A.
B.
C.
D.
There is no difference between Server and Client Data Store access, both can be used conveniently.
Data is accessed from Server only if it is the data store.
Data is accessed from Client only if it is an Excel file.
A local file on a laptop can be accessed using Client access, or from Server If a copy of the file is on the EDQ server landing area.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 42
If an ODI user function has one syntax and one or more implementations, can it be used in an ODI interface mapping?
http://www.gratisexam.com/
http://www.gratisexam.com/
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
One key feature of the User Functions is that they will give you the opportunity to enter the matching syntax for any other database of your choice. No matter which
technology you will use later on, you will only have to provide the name of the user function, irrespectively of the underlying technology.To add other
implementations and technologies, simply go back to the Implementation tab of the User Function, click the Add button. Select the technology for which you are
defining the code, and add the code.
QUESTION 43
When the data, source, and target are persistent in the same data server, in an ODI interface, do you need an LKM and an LKM to load the data on target?
A.
B.
C.
D.
Yes, both an LKM multi technology and an IKM multi-technology are required.
Yes, an LKM multi-technology and an IKM single technology are required.
No, only an IKM multi-technology is required,
No, only an IKM single technology is required.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://www.gratisexam.com/
http://docs.oracle.com/cd/E28280_01/integrate.1111/e12643/interfaces.htm#CHDEHIDE
QUESTION 44
Identify the operation that ensures that referential integrity is maintained while loading changes detected by the ODI CDC framework.
A.
B.
C.
D.
Unlock Subscriber
Extend Window
Lock Subscriber
Purge Journal
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation:
Extend Window: The Consistency Window is a range of available changes in all the tables of the consistency set for which the insert/update/delete are possible
without violating referential integrity. The extend window operation (re)computes this window to take into account new changes captured since the latest Extend
Window operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from other
journalizing operations.
http://docs.oracle.com/cd/E21764_01/integrate.1111/e12643/data_capture.htm#CFHIHJEE
QUESTION 45
Select the two correct reasons that might lead you to use EDQ Transformation Processors rather than transform data in ODI.
A.
B.
C.
D.
E.
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 46
http://www.gratisexam.com/
Updates have been made to Interfaces in a Package. What would you do to make sure the Production team runs a scenario containing those updates while
preserving the existing scenario's schedule?
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Accurate.
QUESTION 47
After invoking an Enterprise Data Quality Job from ODI, where can you monitor the detailed progress of that Job?
A.
B.
C.
D.
In Operator
In Enterprise Data Quality
In ODI Console
In Enterprise Manager
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 48
Which two ODI knowledge modules are included in the Application Adapter for Hadoop?
A.
B.
C.
D.
Correct Answer: BD
http://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
Updated.
QUESTION 49
Which one of the following attributes should always be provided to EDQ AV as a separate attribute if available?
A.
B.
C.
D.
E.
Name
City
Country
State or Province
Zip or Postal code
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 50
Identify two parameters of the OGG JKMs that must be set in order to configure OGG through ODI.
A.
B.
C.
D.
SRC__OGG__OBJECT_GROUP
SYNC__JRN_DELETE
ST G_MANAGER_PORT
AUTO CONFIGURATION
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
It's perfectly right.
QUESTION 51
Select two correct answers. ODI and EDQ can share the same infrastructure If__________.
http://www.gratisexam.com/
A.
B.
C.
D.
E.
They use an Oracle DB as a repository and WebLogic to host the web application
They use an Oracle DB as a repository and WebSphere to host the web application
They use any DB as a repository and any compatible web application server
They use an Oracle DB as a repository and Tomcat to host the web application
ODI and EDQ cannot share the same infrastructure, they both have different architecture
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 52
You are designing a Load Plan in which you need to create multiple branches based on the value of a variable. How do you implement this using the Load Plan
editor?
A.
B.
C.
D.
Drag the variable into Load Plan and define a Case Step
Add a Case Step in Load Plan and select variable- in the wizard
Create a scenario from the variable and add the scenario to Load Plan to create a Case Step
Add a Case Step, then drag the variable into Case Step
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 53
To declare mapping on a target column, does a developer have to manually write the required database functions?
A.
B.
C.
D.
Yes, ODI only allows manual insertion of information related to source-target mappings.
Yes, either the work area can be used to write the functions or a configuration file can be prepared for ODI to read.
No, a developer must prepare a configuration file and associate to it a user function,
No, a graphical expression editor can be used to drag and drop columns and the required function definitions.
http://www.gratisexam.com/
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 54
In ODI, can a check constraint be added to metadata?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 55
Is it possible to import a knowledge module into project (A) and then reference that knowledge module in another project (B)?
A.
B.
C.
D.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Explanation:
Only global KMs or KMs that have already been imported into the project can be selected in the interface. Make sure that you have imported the appropriate KMs in
the project before proceeding.
http://www.gratisexam.com/
QUESTION 56
In Topology, can a query be defined to retrieve native database sequences?
A.
B.
C.
D.
Yes, in the technology details in the Topology submodule, there is a tab that defines queries for specific database elements.
Yes, but you need to specify an option in the knowledge modules of the mapping using sequences.
No, only the timestamp definition can be set in Topology.
No, the query for native sequences is defined in ODI Data Models, under ODJ Studio Designer.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 57
Identify two true statements regarding the ODI web-based components.
A.
B.
C.
D.
Enterprise Manager Fusion Middleware Control Console provides access to ODI dataservers settings.
ODI Console allows administrators to edit users' information.
ODI sessions can be monitored in Enterprise Manager Fusion Middleware Control Console.
ODI Console provides access to Project and Interface details.
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/odi_console.htm
QUESTION 58
In an ODI interface, is it mandatory to use a join to describe a lookup?
A.
B.
C.
D.
http://www.gratisexam.com/
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Answer is Modified.
QUESTION 59
Select two correct statements about Results Books.
A.
B.
C.
D.
E.
A Results Book can contain tabs containing the output from several different EDQ processor steps.
Results Books always link to the latest version of a process.
Results Books can be exported to a multlsheet MS Excel Workbook.
A Results Book page will always look the same as the output of the processor it is linked to,
ResultsBooks can combine pages from many projects.
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
Explanation:
http://www.oracle.com/webfolder/technetwork/dataquality/edqhelp/Content/concepts/results_books.htm
QUESTION 60
Identify the right variable step type to use when assigning a value to a variable with a SQL query.
A.
B.
C.
D.
Refresh Variable
Declare Variable
Set Variable
Evaluate Variable
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
http://www.gratisexam.com/
QUESTION 61
Identify two Change Data Capture implementation strategies provided through the ODI knowledge modules.
A.
B.
C.
D.
Triggers
Oracle GoldenGate
Extract source data to flat files
Before and after database image comparison
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 62
Identify two true statements regarding the ODI SDK.
A.
B.
C.
D.
The ODI SDK is used to load data between Teradata and Oracle.
The ODI SDK can be used to embed ODI processes into another product.
The ODI SDK is required to be used by ETL developers in order to develop ODI processes,
The ODI SDK allows developers to execute most ODI operations through a Java program.
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 63
To use ODI efficiently in a Data Warehouse project is it necessary to have a topology with an intermediate transformation server?
A.
B.
C.
D.
http://www.gratisexam.com/
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 64
When working with delimited flat files, is it possible to enforce primary key on a flat file using a CKM?
A.
B.
C.
D.
No, it is not possible to enforce constraints on some technologies such as flat files and JMS queues.
No, it is not possible to enforce constraints on any technology.
Yes, it is possible also to forward-engineer it to the flat file definition.
Yes, but you have to save it as a fixed file.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 65
You want to add a new CDC subscriber in ODI after you have started the Journal process, what steps do you need to go through in order to use this new
subscriber?
A.
B.
C.
D.
Drop Journal, remove existing subscribers, add a new subscriber, start Journal, and edit the default Journalizing filter in your Interfaces
Drop Journal,add anew subscriber, start Journal, and remove the default Journalizing filter in your Interfaces
Drop Journal, add a new subscriber, start Journal, and edit the default Journalizing filter in your Interfaces
Add anew subscriber and edit the default Journalizing filter in your Interfaces
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
You can add subscribers after starting the journals. Subscribers added after journal startup will only retrieve changes captured since they were added to the
subscribers list.
http://www.gratisexam.com/
QUESTION 66
You are loading a file into a database but the file name is unknown at design time and will have to be passed dynamically to a Package at run time; how do you
achieve this?
A.
B.
C.
D.
Create a variable, use it in Topology at the File dataserver-level, and add it to a package as a Declare Variable step
Create a variable, use it in Topology at the File dataserver-level, and add it to a package as a Set Variable step
Create a variable, use it as the Resource Name of the File datastore, and add it to a package as a Declare Variable step
Create a variable, use it as the Resource Name of the File datastore, and add it to a package as a Set Variable step
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 67
Select the two correct statements about the Date Profiler.
A.
B.
C.
D.
E.
It can profile string dates written in a variety of formats, such as DD/MM/YYYY or MM/DD/YYYY.
It provides a distribution for the day in the year, such as February 21, regardless of the year.
It allows the EDQ user to define a valid range of dates.
By clicking a date in blue, the user can drill down to the records that carried that value.
It rejects February 29 as an invalid date.
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 68
Do all project developers using ODI need to consolidate their own local metadata repositories?
A. No, ODI uses a centralized relational metadata repository that all the developers share.
B. No, ODI proprietary metadata server allows all developers to share the common metadata of a specific project.
C. Yes, you have to invoke a dedicated web service to synchronize the metadata using the Oracle Service Bus.
http://www.gratisexam.com/
D. Yes, the local metadata needs to be transmitted via FTP and synchronized with a dedicated proprietary engine, creating a common metadata model for all
developers.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 69
Identify one correct statement regarding Exception steps in Load Plans.
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 70
Identify three objects from which scenarios can be generated.
A.
B.
C.
D.
E.
F.
Interface
Variable
Package
Knowledge modules
Trail
Extract
http://www.gratisexam.com/
Explanation/Reference:
QUESTION 71
When using a customized reverse knowledge module, can the execution be done only on the development environment?
A.
B.
C.
D.
No, all environments linked to a logical schema can be used to reverse-engineer table structure,
No, only the production environment can be used.
No, only a Java engine intermediate environment can be processed.
Yes, as long as the other environment is a mirrored copy.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
http://www.gratisexam.com/
http://www.gratisexam.com/