Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
O03EH0
Mar, 2013
Korea
Sanken Electric Korea Co., Ltd.
(Yeouido B/D 16F)24,Gukjegeumyung-ro 2-gil,
Yeongdeungpo-gu,Seoul 150-734, Korea
Te l : 82-2-714-3700
Fax: 82-2-3272-2145
Singapore
Sanken Electric Singapore Pte. Ltd.
152 Beach Road, #10-06 The Gateway East,
Singapore 189721
Te l : 65-6291-4755
Fax: 65-6297-1744
Malaysia
Sanken Electric (Malaysia) Sdn. Bhd.
Block B-20-5, Level 20, Northpoint Midvalley City,
No.1, Medan Syed Putra Utara, 59200 Kuala Lumpur, Malaysia
Te l : 60-3-2282-2345
Fax: 60-3-2282-6345
Europe
United Kingdom
Sanken Power Systems (UK) Ltd.
Pencoed Technology Park
Pencoed, Bridgend CF35 5HY, United Kingdom
Te l : 44-1656-869-100
Fax: 44-1656-869-162
SEMICONDUCTORS
GENERAL CATALOG
ICs
Transistors
Thyristors
Diodes
DC/DC Power Modules
North America
This is notification that you, as purchaser of the products/technology, are not allowed to perform any of the following:
1. Resell or retransfer these products/technology to any party intending to disturb international peace and security.
2. Use these products/technology yourself for activities disturbing international peace and security.
3. Allow any other party to use these products/technology for activities disturbing international peace and security.
Also, as purchaser of these products/technology, you agree to follow the procedures for the export or transfer of these products/technology,
under the Foreign Exchange and Foreign Trade Law, when you export or transfer the products/technology abroad.
H1-O03EH0-1303015ND
United States
Allegro MicroSystems, Inc.
Warning
The contents in this document are subject to changes, for improvement and other purposes,
without notice.
The user must take responsibility for considering and determining which objects the
products in this document are used with.
Although we will continue to improve the quality and reliability of our products,
semiconductor products, by their nature, have certain fault and failure rates. The user must
take responsibility for designing and checking to secure the device and system so that a part
failure may not lead to human injury, fire, damages, or other losses.
The products in this document are intended for normal electronic devices (such as home
appliances, office equipment, communication terminals, or measurement devices).
If you are considering using our products for a device that requires high reliability (such as
transport machines and their control units, traffic light control systems, disaster prevention,
and security equipment or any kind of safety equipment), make sure that you consult our
sales representative.
Do not use these products for devices that require extremely high reliability (such as
aerospace instruments, nuclear power control units, or life support systems).
SANKEN
SEMICONDUCTORS
C O N T E N T S
ICs
1-1
1-2
1-3
1-1-3
1-1-4
1-2-4
1-2-5
Transistors
2-1
2-2
2-3
2-4
Thyristors
3-1
3-2
Diodes
4-1
4-2
4-3
4-4
4-5
4-6
236
ICs
1-1-2
1-1-3
1-1-4
1-2
1-3
1-2-1
1-2-2
1-2-3
1-2-4
1-2-5
1 ICs
Ordering Information
All products listed must be ordered in standard packing increments.
Series Name/
Product Name
Package
LC52xxD
DIP8
LC52xxS
Series Name/
Product Name
Bulk
Taping
2500
SI-8205NHD
Package
HSOP8(Surface-mount)
Taping
1000
SOP8(Surface-mount)
1000
SI-8205NHG
HSOP8(Surface-mount)
1000
LC55xxD/LD
DIP8
2500
SI-8400L
864
LC55xxF/LF
TO220F-7
1800
SI-8500L
320
HSOP8(Surface-mount)
1000
SI-8511NVS
TSSOP24(Surface-mount)
2800
SIM6800M
LC57xxS
NR110K
HSOP8(Surface-mount)
1000
NR111E
eSOIC8(Surface-mount)
2500
NR117K
HSOP8(Surface-mount)
1000
NR119E
eSOIC8(Surface-mount)
2500
SLA7022MU/
NR301E
eSOIC8(Surface-mount)
2500
7029M
NR885E
eSOIC8(Surface-mount)
2500
SLA7024M/
NR885K
HSOP8(Surface-mount)
1000
7026M/7027MU
(SLA18Pin)
NR887D
DIP8
2500
SLA707xMR/MPR
PS4(Surface-mount)
2000
SAI
SCM1240M
DIP33Pin
LF.No.2551/2552:
SLA686xMZ
/MPRT
SLA708xMPR
250
TO263-5(Surface-mount)
800
SI-3000KF
TO220F-5
2000
SI-3000KS
SOP8(Surface-mount)
1000
SMA7022MU/
SI-3000LLSL
SOP8(Surface-mount)
1000
7029M
SI-3000LSA
SOP8(Surface-mount)
1000
SPI-6631M
SI-3000LU
SOT89-5(Surface-mount)
1000
SI-3000ZD
TO263-5(Surface-mount)
800
SI-3000ZF
TO220F-5
2000
SI-6633C
QFN36(Surface-mount)
SI-6633M
QFN36(Surface-mount)
SI-7321M
HSOP44(Surface-mount)
SI-8000E
LF.No.2971: 1080
LF.No.2171: 648,
(SLA24Pin)
LF.No.2175: 540
1080
1080
1080
1080
(SLA15Pin)
ZIP18 with Fin
(SLA23Pin)
ZIP23 with Fin
(SLA23Pin)
SI-3000KD
SI-7510
DIP40Pin
SIP24 with Fin
SMA682xMH/
686xMZ
SIP24
LF.No.2451: 1080,
(SMA24Pin)
LF.No.2452: 1008
ZIP15
1440
HSOP16(Surface-mount)
1400
SPI-8000A
HSOP16(Surface-mount)
1400
SPI-8000TW
HSOP16(Surface-mount)
1400
SSC2000
SOP8(Surface-mount)
1000
2500
SSC2100
SOP8(Surface-mount)
1000
2500
SSC9512
DIP16
1250
2000
SSC9522S
SOP18(Surface-mount)
2000
DIP30
680
STA6940M
ZIP18(STA18Pin)
LF.No.434: 1785
TO220F-5
2000
STA713xMPR
ZIP18(STA18Pin)
LF.No.434: 1785
STA801M
(SMA15Pin)
SI-8000FD
TO263-5(Surface-mount)
800
ZIP10(STA10Pin)
100
SI-8000FFE
TO220F-5
2000
STR2W100
TO220F-6
1800
SI-8000GL
DIP8
2500
STR3A100
DIP8
2500
SI-8000HD
TO263-5(Surface-mount)
800
STR-A6000
DIP8
2500
STR-A6100
SI-8000HFE
TO220F-5
2000
DIP8
2500
SI-8000JD
TO263-5(Surface-mount)
800
STR-L400
SIP10(STA10Pin)
3300
SI-8000JF
TO220F-5
2000
STR-L6400
SIP10(STA10Pin)
3300
SI-8000Q
HSOP8(Surface-mount)
1000
STR-V100
SIP8(STA8Pin)
4050
STR-V600
SI-8000S
TO220F-5
2000
SIP8(STA8Pin)
4050
SI-8000SD
TO263-5(Surface-mount)
800
STR-W6000S
TO220F-6
1800
SI-8000TFE
TO220F-5
2000
STR-W6200D
TO220F-6
1800
SI-8000TM
TO252-5(Surface-mount)
3000
STR-W6700
TO220F-6
1800
SI-8000W
SOP8(Surface-mount)
1000
STR-X6700
TO3PF-7
500
SI-8000Y
TO220F-7
2000
STR-Y6400
TO220F-7
1800
DIP8
2500
STR-Y6700
TO220F-7
1800
SI-8100QL
ICs
1 ICs
Series Name/
Product Name
SX68000MH
Package
SOP27(Surface-mount)
Taping
LF1890:
3000
ICs
Part Number
8-pin package, minimum number of discrete components, low noise, and low ripple
Oscillation Frequency
Package
Fixed to 65kHz
SOP8
SSC2001S
Part Number
Maximum on time
Package
SSC2101S
15s
SOP8
SSC2102S
20.7s
SOP8
Oscillation
Frequency
MOSFET
VDSS (MIN)
RDS(ON) (MAX)
STR3A151
4.0
STR3A152
3.0
STR3A153
67kHz
650V
1.9
STR3A154
1.4
STR3A155
1.1
STR3A151D
4.0
STR3A152D
STR3A153D
650V
1.9
1.4
STR3A155D
1.1
STR3A161HD
Package
Latch
3.0
67kHz
STR3A154D
STR3A162HD
DIP8
Auto restart
4.2
100kHz
700V
3.2
STR3A163HD
Auto restart
2.2
<STR-A6000 Series>
For small power applications
Low noise, low standby power (Input power PIN<25mW at no load)
Brown-in and brown-out functions
Part Number
Oscillation
Frequency
MOSFET
VDSS (MIN)
RDS(ON) (MAX)
STR-A6051M
STR-A6052M
3.95
650V
2.8
STR-A6079M
800V
19.2
STR-A6059H
650V
STR-A6053M
STR-A6061H
STR-A6062H
67kHz
100kHz
1.9
6
3.95
700V
2.8
STR-A6069H
STR-A6063HD*
DIP8
STR-A6061HD*
STR-A6062HD*
Package
3.95
100kHz
2.8
700V
2.3
STR-A6069HD*
6
In addition to normal overcurrent protection, overcurrent protection that operates in the case of a short circuit at the output coil has been added. This overcurrent
protection operates during the leading edge blanking period.
<STR-V600 Series>
Low height, at least 4 mm of creepage isolation between high and low terminal tips
Low noise, low standby power (Input power PIN<25mW at no load)
SIP8 package version of STR-A6000
Part Number
STR-V653
MOSFET
Oscillation
Frequency
VDSS (MIN)
RDS(ON) (MAX)
67kHz
650V
1.9
Package
SIP8
<STR2W100D Series>
Low noise, low standby power (Input power PIN<25mW at no load)
Part Number
STR2W152D
STR2W153D
ICs
MOSFET
Oscillation
Frequency
VDSS (MIN)
67kHz
650V
RDS(ON) (MAX)
3.0
1.9
Package
TO220F-6
MOSFET
Oscillation
Frequency
VDSS (MIN)
67kHz
650V
RDS(ON) (MAX)
STR-W6051S
Package
3.95
STR-W6052S
2.8
STR-W6053S
TO220F-6
1.9
<STR-W6200D Series>
Low noise, low standby power (Input power PIN<40mW at no load)
External latch protection (ELP) function
Part Number
MOSFET
Oscillation
Frequency
VDSS (MIN)
67kHz
650V
RDS(ON) (MAX)
STR-W6251D
Package
3.95
STR-W6252D
2.8
STR-W6253D
TO220F-6
1.9
Pulse ratio control (PRC) type with off-time period fixed (originated by Sanken Electric)
<STR-A6100 Series>
For small power applications
Low noise, low standby power
Part Number
Fixed off-time
period
MOSFET
VDSS (MIN)
STR-A6131
RDS(ON) (MAX)
STR-A6159
8s
2.62
6
650V
STR-A6151
800V
19.2
STR-A6131M
500V
3.95
650V
3.95
STR-A6159M
11.5s
Yes
3.95
STR-A6169
STR-A6151M
Package
3.95
500V
STR-A6132
Auto standby
function
STR-A6153E
DIP8
No
1.9
<STR-V100 Series>
Low height, at least 4 mm of creepage isolation between high and low terminal tips
Low noise, low standby power
SIP8 package version of STR-A6100
Part Number
Fixed off-time
period
STR-V152
8s
STR-V153
11.5s
MOSFET
VDSS (MIN)
650V
RDS(ON) (MAX)
2.8
2
Package
SIP8
Quasi-resonant type
<STR-Y6700 Series>
High efficiency in full load range
Low noise, low standby power
Part Number
STR-Y6735
STR-Y6753
STR-Y6754
MOSFET
VDSS (MIN)
RDS(ON) (MAX)
500V
0.8
1.9
650V
1.4
STR-Y6763
STR-Y6765
Package
3.5
800V
TO220F-7
2.2
STR-Y6766
1.7
<STR-Y6400 Series>
High efficiency in full load range
Low noise, low standby power
Mode change delay time adjustable
Part Number
STR-Y6453
STR-Y6456
STR-Y6473
STR-Y6476
MOSFET
VDSS (MIN)
650V
850V
RDS(ON) (MAX)
Package
1.8
0.73
3.6
TO220F-7
1.3
ICs
Part Number
MOSFET
VDSS (MIN)
RDS(ON) (MAX)
850V
6.5
STR-L6472
Package
SIP10
<STR-L400 Series>
Low height, at least 6.5 mm of creepage isolation between high and low terminal tips
Low noise, high efficiency
Part Number
MOSFET
VDSS (MIN)
RDS(ON) (MAX)
STR-L451
650V
3.95
STR-L472
900V
7.7
Package
SIP10
<STR-W6700 Series>
High efficiency in full load range
Low noise, undervoltage lockout (UVLO) standby function
Part Number
MOSFET
VDSS (MIN)
STR-W6734
RDS(ON) (MAX)
Yes
Yes
Yes
No
No
Yes
Auto burst
operation
Bottom-skip QR
operation
Yes
Yes
No
No
Yes
No
No
Yes
Package
0.57
STR-W6753
1.7
STR-W6754
Bottom-skip QR
operation
1.0
500V
STR-W6735
Auto burst
operation
650V
0.96
STR-W6756
0.73
STR-W6765
800V
1.8
STR-W6750F
650V
0.73
STR-W6723N
450V
1.4
STR-W6735N
500V
0.57
STR-W6756N
650V
0.73
STR-W6765N
800V
1.8
TO220F-6
<STR-X6700 Series>
High efficiency in full load range
Low noise, undervoltage lockout (UVLO) standby function
Part Number
MOSFET
VDSS (MIN)
STR-X6737
500V
STR-X6756
650V
STR-X6757
STR-X6769
800V
STR-X6750B
650V
STR-X6759B
STR-X6769B
800V
STR-X6750F
650V
STR-X6759F
RDS(ON) (MAX)
0.36
0.73
0.62
0.66
0.62
0.385
0.66
0.62
0.385
STR-X6729
450V
0.189
STR-X6737M
500V
0.36
STR-X6757N
650V
STR-X6759N
STR-X6768N
800V
Package
SSC9512
DIP16
SSC9522S
SOP18
ICs
Package
0.62
0.385
1.0
TO3PF-7
Selection Guide
<Single Output>
Surface-Mount Type
Output Current
Output Voltage
(V)
Series Name
(A)
3.3
5.0
0.5
SI-8000W
0.6
SI-8000JD
1.5
SI-8000TM
1.5
NR117K
1.5
NR119E
NR885E
9.0
12
0.8
1.0
0.4
SAI
0.5
Maximum
Input Voltage
Oscillation
Frequency
(V)
(kHz)
35
60
Package
Remarks
Page
PS-4
12
35
60
SOP8
14
43
125
TO263-5
16
43
300
TO252-5
35
30
HSOP8
20
2.0
35
364
eSOIC8
20
3.0
20
350
eSOIC8
22
NR885K
3.0
20
350
HSOP8
22
SI-8205NHD
3.0
46
200 to 1000
HSOP8
24
SI-8205NHG
3.0
46
300 to 1000
HSOP8
24
43*1
60
TO263-5
26
53
250
HSOP16
28
18
SI-8000SD
3.0
SPI-8000A
3.0
SI-8000Q
3.5
30
500
HSOP8
SI-8000FDE
3.5
43
300
TO263-5
SI-8000FDL
3.5
43
300
TO263-5
Active: low
34
NR110K
4.0
35
350
HSOP8
20
NR111E
4.0
35
350
eSOIC8
20
SI-8000HD
5.5
43
150
TO263-5
32
34
36
Thru-Hole Type
Output Current
Output Voltage
(V)
Series Name
(A)
3.3
5.0
9.0
12
0.5
0.8
1.0
1.5
Maximum
Input Voltage
Oscillation
Frequency
(V)
(kHz)
Package
Remarks
Page
SI-8400L
0.5
35
60
SI-8000E
0.6
43
60
SI-8500L
1.0
35
60
SI-8000JF
1.5
43
125
TO220F-5
40
SI-8000TFE
1.5
43
300
TO220F-5
42
SI-8000GL
1.5
53
250
DIP8
NR887D
2.0
20
500
DIP8
SI-8000S
3.0
43*2
60
TO220F-5
SI-8100QL
3.5
SI-8000FFE
3.5
NR111D
4.0
SI-8000HFE
5.5
SI-8000Y
8.0
38
30
350
DIP8
43
300
TO220F-5
35
350
DIP8
43
150
TO220F-5
45
130
TO220F-7
60
60
44
Current mode control, synchronous rectifier
46
48
50
52
54
56
58
ICs
Output Voltage
Oscillation Frequency
(A)
(V)
(V)
(kHz)
ch1
0.5
43
ch2
0.5
ch1
1.5
Variable (1.0 to 16 V)
ch2
1.5
Variable (1.0 to 16 V)
ch1
1.5
Variable (1.0 to 24 V)
ch2
1.5
Variable (1.0 to 24 V)
ch1
1.5
Variable (1.0 to 24 V)
ch2
1.5
Variable (1.0 to 24 V)
Part Number
STA801M
SPI-8001TW
SPI-8002TW
SPI-8003TW
Package
Remarks
Page
125
ZIP10
62
21
250
HSOP16
64
40
250
HSOP16
64
40
200 to 400
64
<Control ICs>
Variable (Reference Voltage)
Oscillation Frequency
(V)
(V)
(kHz)
1.1
25
100 to 400
Series Name
SI-8511NVS
10
ICs
Package
TSSOP24
Remarks
Synchronous rectifier, PRC (fixed to ton)
Page
68
Application Note
Heat Dissipation and Reliability
Mounting Torque
SI-8000E
SI-8000JF
SI-8000S
SI-8000TFE
SI-8000HFE
SI-8000FFE
SI-8000Y
VIN
Efficiency depends on the input/output conditions. Please refer to
the efficiency characteristics of the devices. (Posted on the Web site.)
VO :
VIN:
IO :
:
VF :
Output voltage
Input voltage
Output current
Efficiency(%)
Diode forward voltage
Thermal Design
The maximum junction temperature Tj(max) given in the Absolute Maximum
Ratings is specific to each product type and must be strictly observed.
Thus, thermal design must consider the maximum power dissipation
PD(max), which varies by the conditions of use, and the maximum ambient
temperature Ta(max).
To simplify thermal design, Ta-PD characteristic graphs are provided herein.
Please observe the following steps for heatsink design:
1. Obtain the maximum ambient temperature Ta(max).
2. Obtain the maximum power dissipation PD(max).
3. Look for the intersection point on the Ta-PD characteristic graph and
determine the size of the heatsink.
Although the heatsink size is now obtained, in actual applications, 10-to20% derating factor is generally introduced. Moreover, the heat dissipation
capacity of a heatsink highly depends on how it is mounted. Thus, it is
recommended to measure the heatsink and case temperature in the actual
operating environment.
Please refer to the Ta-PD characteristic graphs for respective product
types.
Others
Devices can not be operated in parallel connection aiming for a larger
current.
Not applicable for the current boost or voltage step-up use.
Diodes
ICs
11
Lineup
Part Number
SAI01
SAI02
SAI03
VO(V)
5.0
3.3
12.0
IO(A)
0.5
0.4
Parameter
Symbol
Ratings
DC Input Voltage
VIN
35
Unit
V
Power Dissipation
PD
0.75
W
C
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
j-c
20
C/W
Applications
Power supplies for telecommunication
equipment
Onboard local power supplies
Symbol
VIN
IO
Unit
SAI01
SAI02
SAI03
7 to 33
5.3 to 28
15 to 33
0 to 0.5
Tjop
0 to 0.4
30 to +125
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
min.
Output Voltage
4.80
Conditions
Oscillation Frequency
Line Regulation
Load Regulation
Temperature Coefficient of Output Voltage
Ripple Rejection
Overcurrent Protection
Starting Current
ICs
f
Conditions
3.17
SAI02
typ.
max.
min.
3.30
3.43
11.40
VIN=15V, IO=0.3A
max.
12.00
12.60
80
75
88
VIN=15V, IO=0.3A
VIN=24V, IO=0.3A
60
60
60
VIN=15V, IO=0.3A
60
30
20
100
30
70
VIN=24V, IO=0.1 to 0.4A
0.5
0.5
1.5
45
45
45
f=100 to 120HZ
f=100 to 120HZ
f=100 to 120HZ
0.55
0.55
VIN=10V
kHZ
130
mV
RREJ
VIN=24V, IO=0.3A
80
VIN=24V, IO=0.3A
VIN=20V, IO=0.3A
100
Unit
SAI03
typ.
Conditions
Conditions
5.20
VO/Ta
IS1
5.00
80
VOLOAD
Conditions
min.
VIN=20V, IO=0.3A
VOLINE
Conditions
max.
VIN=20V, IO=0.3A
Efficiency
12
VO
Conditions
SAI01
typ.
95
mV
mV/C
dB
0.45
VIN=8V
VIN=18V
SAI Series
(Unit : mm)
4.32
max.
4.7
0.25
+0.15
0.75 0.05
0.15
2.54
4
.GND
0.89
0.2
2 SW
3VOS
1VIN
1.4
6.8
max.
8.0
0.5
6.3
0.2
3.6
0.3 0.05
0.25
9.8
0.2
Pin Assignment
q VIN
w SWOUT
e VOS
r GND
0.3
Block Diagram
VIN
max.
0.2
0 to 0.15
3.0
0.3
0.2
4.0
+0.15
1.0
2 SWOUT
OCP
Reg.
VIN
OSC
SWOUT
VIN
TSD
Reset
SAI
Drive
Comp.
C1
100F
3 VOS
Amp.
GND
4
VOS
L1
2
3.3V 5V : 200H
12V : 300H
VO
3
D1
SJPB-D4
(Sanken)
C2
330F
GND
VREF
GND
4
GND
Ta-PD Characteristics
PD=VOIO
0.8
Glass epoxy
board
(95691.2)
Natural air cooling
0.7
0.6
0.5
0.4
VFIO 1
VO
VIN
0.3
0.2
0.1
0
30
100
1
25
50
75
100
125
ICs
13
SI-8000W Series
Features
Parameter
Symbol
Ratings
DC Input Voltage
VIN
35
Unit
V
Power Dissipation
PD
W
C
Junction Temperature
Tj
30 to +125
Storage Temperature
Tstg
40 to +125
j-L
22
C/W
j-a
100
C/W
Applications
Power supplies for telecommunication equipment
Onboard local power supplies
Parameter
SI-8033W
Unit
SI-8050W
VIN
IO
0 to 0.6
Tjop
30 to +125
5.3 to 28
7 to 33
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
SI-8033W
min.
Output Voltage
3.17
Conditions
Oscillation Frequency
Line Regulation
Load Regulation
Temperature Coefficient of Output Voltage
Ripple Rejection
Overcurrent Protection Starting
Current
ICs
max.
min.
3.30
3.43
4.80
VIN=15V, IO=0.3A
Efficiency
14
VO
Conditions
SI-8050W
typ.
f
Conditions
Conditions
5.20
75
80
VIN=20V, IO=0.3A
60
60
VIN=15V, IO=0.3A
VIN=20V, IO=0.3A
20
Conditions
5.00
VIN=20V, IO=0.3A
80
80
VOLOAD
max.
VIN=15V, IO=0.3A
60
VOLINE
30
30
VIN=20V, IO=0.1 to 0.4A
VO/Ta
0.5
0.5
RREJ
45
45
f=100 to 120HZ
f=100 to 120HZ
IS1
Conditions
0.61
0.61
VIN=15V
VIN=20V
V
%
kHZ
100
Conditions
Unit
typ.
40
mV
mV
mV/ C
dB
A
SI-8000W Series
(Unit : mm)
5.10.4
1.27
6.20.3
4.40.2
0.15+0.1
0.05
0.50.1
0.40.1
o1
1.27
1.50.1
0.050.05
0.10
0.12 M
1.550.15
0t
0.995max.
0.40.1
Block Diagram
VIN
Pin Assignment
q VIN
w N.C
e SW
r VOS
t GND
y GND
u GND
i GND
3 SW
L1
OCP
200H
Reg.
OSC
VIN
SI-8000W
TSD
Reset
SW
VIN
Drive
Comp.
C1
100F
GND
5 to 8
4 VOS
Amp.
VOS
VO
4
D1
C2
330F
SJPB-D4
(Sanken)
GND
GND
VREF
5 to 8
GND
Reference Data
Copper Laminate Area vs. Power Dissipation
1.2
Ta=25C
Ta=50C
120
Ta=80C
0.8
100
0.6
0.4
0.2
0
10
100
Copper Laminate Area (mm2)
(GND Terminal)
1000
80
60
40
10
100
1000
ICs
15
SI-8000JD Series
Features
Lineup
Part Number
SI-8033JD
SI-8050JD
SI-8090JD
SI-8120JD
VO(V)
3.3
5.0
9.0
12.0
IO(A)
1.5
Parameter
Symbol
Ratings
Unit
DC Input Voltage
VIN
43
Output Current
IO
1.5
PD
W
C
Power
Dissipation*
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
j-c
C/W
j-a
33.3
C/W
Conditions
Applications
Power supplies for telecommunication equipment
Onboard local power supplies, etc.
Symbol
SI-8033JD
SI-8050JD
SI-8090JD
SI-8120JD
VIN1
5.3 to 40
7 to 40
11 to 40
14 to 40
VIN2
6.3 to 40
8 to 40
12 to 40
15 to 40
Unit
Conditions
IO=0 to 1A
IO=0 to 1.5A
IO
0 to 1.5
Tjop
30 to +125
VINVO+3V
Top
30 to +125
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
VO
Output Voltage
SI-8033JD
typ.
max.
min.
3.234
3.30
3.366
4.90
Conditions
Efficiency
Conditions
f
Oscillation Frequency
Conditions
Load Regulation
Temperature Coefficient of Output Voltage
Overcurrent Protection
Starting Current
ON/OFF*
Pin
Conditions
IS1
Conditions
typ.
max.
min.
typ.
max.
5.00
5.10
8.82
9.00
9.18
11.76
12.00
12.24
VIN=20V, IO=0.5A
VIN=21V, IO=0.5A
VIN=24V, IO=0.5A
77
82
86
88
VIN=15V, IO=0.5A
VIN=20V, IO=0.5A
VIN=21V, IO=0.5A
VIN=24V, IO=0.5A
125
125
125
125
VIN=15V, IO=0.5A
VIN=20V, IO=0.5A
VIN=21V, IO=0.5A
VIN=24V, IO=0.5A
80
40
100
10
10
30
50
40
10
0.5
40
mV/ C
1.6
A
VIN=24V
VSSL
0.5
0.5
0.5
0.5
Outflow Current
at Low Voltage
ISSL
100
100
100
100
Conditions
Iq(oFF)
Conditions
VIN=15V, Io=0A
VIN=20V, Io=0A
200
VIN=15V, VON/OFF=0.3V
VIN=21V, Io=0A
200
VIN=20V, VON/OFF=0.3V
VSSL=0V
7
*: Pin 5 is the ON/OFF pin. Soft start at power on can be performed with a capacitor connected to
this pin.
The output can also be turned ON/OFF with this pin.
The output is stopped by setting the voltage of this pin to VSSL or lower.
ON/OFF-pin voltage can be changed with an open-collector drive circuit of a transistor.
When using both the soft-start and ON/OFF functions together, the discharge current from C3
flows into the ON/OFF control transistor. Therefore, limit the current securely to protect the
transistor if C3 capacitance is large.
The ON/OFF pin is pulled up to the power supply in the IC, so applying the external voltage is
prohibited.
mA
VIN=24V, Io=0A
200
200
VIN=21V, VON/OFF=0.3V
VIN=24V, VON/OFF=0.3V
SI-8000JD
SI-8000JD
SI-8000JD
5 ON/OFF
5 ON/OFF
5 ON/OFF
C3
VOUT. ON/OFF
ICs
mV
VIN=21V
Conditions
mV
40
1.0
1.6
VIN=20V
kHZ
130
10
1.0
1.6
VIN=15V
60
0.5
1.6
120
Iq
16
Unit
min.
VO/Ta
SI-8120JD
max.
VOLOAD
Conditions
SI-8090JD
typ.
VIN=15V, IO=0.5A
25
VOLINE
Line Regulation
SI-8050JD
min.
Soft Start
C3
Soft Start
+VOUT. ON/OFF
SI-8000JD Series
(Unit : mm)
10.0
4.5
(6.8)
0.3
0.1
(3)
0.2
(R0.3)
4.9
0.3
0.2
2.4
(R0.3)
2.0
(0.75)
0.2
0.10
0 to 6
(0.5)
0.1
0.1
(1.7
0.25
0.8
0.25
)
(1.7
)
1
4
9.9
Pin Assignment
q VIN
w SWOUT
e GND
r VOS
t ON/OFF
15.30
0.10
(3)
2.54
9.2
0.3
15.3
0.15
4.9
0.88
0.2
(2R0.45)
(3)
0.2
0.2
1.3 +0.10
0.05
9.2
(4.6)
3-R0.3
1.5 Dp:
(4.4)
0.2
(1.75)
1.2
(15)
0.2
(8.0)
0.2
(0.40)
Case temperature
measurement point
(1.7
0.25
0.8
0.25
(1.7
)
0.2
(3)
(3)
2-R0.3
10.0
0.02
Block Diagram
L1
VIN
1
SWOUT
VIN
PReg.
SI-8000JD
OCP
5 ON/OFF
Latch &
Drive
Reset
SWOUT
VIN
C1
ON/OFF
Soft
Start
VOS
VOUT
4
+
ON/OFF GND
5
3
Di
C2
C3
OSC
GND
TSD
Comp.
Error Amp.
C1
C2
C3
L1
Di
VREF
GND
3
:
:
:
:
:
GND
50V/220F
25V/470F
10V/0.47F (Only when using soft-start function)
100H
SJPB-H6 (Sanken)
Reference Data
55
50
45
40
35
30
0
200
400
600
800
1000
1200
1400
1600
1800
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
40V
30V
20V
VIN 8V
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Ta-PD Characteristics
3.5
Copper Area
4040 mm
( j-a : 33.3C/W)
PD=VOIO
2040 mm
( j-a : 37C/W)
2.5
2020 mm
( j-a :44C/W)
1010 mm
( j-a : 53C/W)
100
VO
1 VFIO 1
VIN
The efficiency depends on the input voltage and the output current. Therefore, obtain the value
from the efficiency graph and substitute the percentage in the formula above.
VO : Output Voltage
1.5
: Efficiency (%)
0.5
VF : D1 forward voltage
0
25
25
50
75
100
125
0.4V(IO=2A)(SJPB-H6)
ICs
17
SI-8000TM Series
Features
Parameter
Symbol
Ratings
Unit
VIN
43
PD1
1.06
PD2
1.65
Junction Temperature*
Tj
30 to +150
Storage Temperature
Tstg
40 to +150
j-c
C/W
j-a
95
C/W
DC Input Voltage
Power Dissipation
Conditions
When mounted on glass-epoxy board (900 mm2 copper area 4.3%)
When mounted on glass-epoxy board (900 mm2 copper area 50%)
*: This product has built-in thermal protection circuits that may operate when the junction temperature rises above
130C.
The recommended design for the junction temperature during operation is below 125C.
Applications
Onboard local power supplies
AV equipment
OA equipment
Symbol
Unit
SI-8008TM
VIN
VO+3*1 to 40
Output Voltage
VO
0.8 to 24
IO
0 to 1.5
Tjop
20 to +100
Top
20 to +85
*1: The minimum value of an input voltage range is the higher of 4.5 V or VO + 3 V.
Electrical Characteristics
(Ta=25C)
Rating
Parameter
Reference Voltage
Temperature Coefficient of
Reference Voltage
Symbol
min.
0.784
VADJ
Conditions
VADJ/T
Conditions
Efficiency
Conditions
Oscillation Frequency
fo
300
VIN=15V, Io=0.5A
60
VIN=10 to 30V, Io=0.5A
10
VIN=15V, Io=0.2 to 1.5A
Conditions
VOLINE
Line Regulation
Conditions
VOLOAD
Load Regulation
Conditions
IS
SI-8008TM
typ.
0.800
VIN=15V, Io=0.1A
0.1
VIN=15V, Io=0.1A, Tc=0 to 100C
81
VIN=15V, Io=0.5A
Outflow Current
at Low Voltage
ISSL
Conditions
Conditions
6
VIN=15V, Io=0A
Conditions
200
VIN=15V, VSS=0V
Iq (OFF)
*: Pin 5 is the SS pin. Soft start at power on can be performed with a capacitor connected to this pin. The
output can also be turned ON/OFF with this pin.
The output is stopped by setting the voltage of this pin to VSSL or lower. SS-pin voltage can be changed
with an open-collector drive circuit of a transistor. When using both the soft-start and ON/OFF functions
together, the discharge current from C3 flows into the ON/OFF control transistor. Therefore, limit the
current securely to protect the transistor if C3 capacitance is large. The SS pin is pulled up to the power
supply in the IC, so applying the external voltage is prohibited. If the pin is not used, leave it open.
kHz
mV
40
mV
A
0.5
40
V
A
mA
400
SI-8000TM
5 SS
VO. ON/OFF
ICs
VIN=15V
10
VSSL=0V
Iq
18
mV/C
1.6
Conditions
80
Unit
max.
0.816
SI-8000TM
5 SS
SI-8000TM
5 SS
C3
C3
Soft start
Soft start
+VO. ON/OFF
SI-8000TM Series
(Unit : mm)
6.600.20
2.30
0.20
5.34
0.20
(5.04)
0.500.10
(1.50)
1.10
0.20
6.60
5.340.20
0.20
(4.06)
9.90
0.1
8
0 to
0.500.10
0.500.10
1.27 TYP
2.700.20
1.180.20
(0.89)
2.700.20
9.90
SEATING PLANE
0.00 to 0.127
0.30
R0
0.30
6.100.20
.3 2
Pin Assignment
q IN
w SW
e GND
r ADJ
t SS
(1.00)
1.27 TYP
2.300.20
Block Diagram
SW
IN
5 SS
ON/OFF
Soft Start
Overcurrent
Protection
PReg.
SW
IN
SI-8000TM
C1
220F
Latch &
Drive
Reset
SS
5
GND
3
VO
R1
ADJ 4
+
R2
Di
C2
470F
IADJ
C3
OSC
+
Thermal
Protection
Comp.
Error Amp.
+
+
VIN
SI-8008TM
Reference Voltage
GND
3
GND
GND
ADJ
4
C1
C2
C3
L1
Di
: 220F
: 470F
: 1F (Only when using soft-start function)
: 47F
: SJPB-H6 (Sanken)
ICs
19
NR110E/K
Features
Parameter
Symbol
Input Voltage
BS Pin Voltage
Pin Voltage between BS and SW
SW Pin Voltage
FB Pin Voltage
EN Pin Voltage
SS Pin Voltage
VIN
VBS
NR110K
Ratings
NR111E
NR117K
NR119E
Unit
VBS-SW
VSW
VFB
VEN
VSS
35
44
8
35
5.5
35
5.5
35
44
8
35
5.5
35
5.5
35
44
8
35
5.5
35
5.5
35
44
8
35
5.5
35
5.5
V
V
V
V
V
V
V
Power Dissipation
PD
1.69
1.76
1.69
1.76
Junction Temperature
Storage Temperature
Thermal Resistance (Junction to Lead (4 pins))
Tj
Tstg
j-c
j-a
74
71
Parameter
Symbol
71
C/W
VIN
IOUT
Vo
Top
Ratings
NR110K
NR111E
NR117K
NR119E
Symbol
Reference Voltage
VREF
Temperature Coefficient of Reference Voltage VREF/T
Oscillation Frequency
fSW
Line Regulation
VLINE
Load Regulation
VLoad
Overcurrent Protection
Is1
Starting Current
Is2
No-load Circuit Current
IIN
Quiescent Circuit Current
IIN(off)
Outflow Current at Low Voltage IEN/SS
SS Pin
Inflow Current
IEN
EN Pin
On Threshold Voltage
VC/EH
ISET Pin Open Voltage
VISET
Maximum ON Duty
DMAX
Minimum ON Time
TON(MIN)
Thermal Protection Start Temperature
TSD
Thermal Protection Return Hysteresis TSD_hys
SW MOSFET ON Resistance
RonH
NR110K/NR111E
min.
typ.
max.
0.784
6
0.7
151
0.8000
0.05
350
50
50
1.5
5.5
1
1
10
20
1.4
1.5
90
150
165
20
85
0.816
14
50
2.1
min.
0.784
6
0.7
151
0.8000
0.05
364
50
50
0.9
2.8
1
1
10
20
1.4
1.5
90
150
165
20
150
max.
min.
0.816
0.784
14
50
2.1
6
0.7
151
NR117K
typ.
0.8000
0.05
30
50
50
0.3
2.1
1
1
10
20
1.4
1.5
90
150
165
20
150
Unit
Conditions
max.
0.816
14
50
2.1
V
mV/C
kHz
mV
mV
A
A
mA
A
A
A
V
V
%
nsec
C
C
m
Ta=40C to +85C
VIN=VINmin to 30V
VIN=12V, Vo=5.0V, IO=0.1 to Iomax
ISET=OPEN
ISET=SHORT
VEN=10k pull up to VIN
Io=0A, VEN=0V
VSS=0V
VEN=10V
NR110E/K
SS
C9
Soft start
ICs
V
A
V
Ratings
NR119E
typ.
*: Pin 8 is the SS pin. Soft start at power on can be performed with a capacitor connected to this pin.
The SS pin is pulled up to the power supply in the IC, so applying the external voltage is prohibited.
20
Unit
*: The minimum value of the input voltage range is indicated value or VO + 3 V, whichever is higher.
**: The device must be used within the range indicated by the Ta-PD characteristics.
Electrical Characteristics
Parameter
74
Applications
adjusted externally
Conditions
NR110E/K
External Dimensions
(Unit : mm)
NR110K NR117K
(HSOP8)
1.50
NR111E NR119E
(eSOIC8)
0.15
A
A2
A1
0.10
0.4
0.40
1.27
E2
6.20
E1
4.40
Pin 1
Mark
2.70
D1
2.90
0.695 TYP
5.20
D
D1
E
E1
E2
MIN
0
1.398
0.33
4.8
3.053
5.893
3.73
2.033
0.508
Pin Assignment
q BS
w VIN
e SW
r GND
t FB
y ISET
u EN
i SS
*: The heat slug on the rear
side is at the ground
potential.
Package A
TYP
1.448
4.902
3.18
2.16
1.27
MAX
0.1524
1.498
0.508
5.004
3.307
6.918
3.89
2.287
0.762
Package B
TYP
0.1
1.4
4.9
3.3
6
3.9
2.4
1.27
0.6
MIN
0
1.25
0.38
4.8
3.1
5.8
3.8
2.2
0.45
MAX
0.15
1.65
0.51
5
3.5
6.2
4
2.6
0.8
Delivered in Package A or B.
Block Diagram
2
OSC
7
ON/
OFF
EN
P.REG
Current
Sense
Amp
OCP
1
Drive
REG
BS
OCP_REF
VREF
0.8V
PWM
LOGIC
6
ISET
IN
SW
OCP_REF
ISET
Compensation
FB
OVP
FB
0.8V
Err Amp
UVLO
SS
TSD
GND
5
FB
SS
VIN
R3
VIN_S
R1
7
C2
C1
SS
GND
4
Vo_s
R5
FB
ISET
6
5
R4
C9
R6
R7
D1
SW
Vo
L1
NR111E
8
GND
C10
1
3
BS
SW
2
IN
EN
C4 C5
GND
C1
C2
C4
C5
C9
C10
R1
R3
R4
R5
R6
R7
L1
: 10F / 35V
: 10F / 35V
: 22F / 16V
: 22F / 16V
: 0.1F
: 0.1F
: 1.7M
: 22
: 20k
: 470 (Vo=5.0V)
: 3.9k
: 0k (When ISET SHORT)
: 10H (NR110K, NR111E, NR119E)
150H (NR117K)
ICs
21
NR885K/NR885E Surface-Mount, Current Mode Control, Synchronous Rectifier Step-down Switching Mode
Features
Parameter
Ratings
NR885K
NR885E
Unit
Input Voltage
VIN
20
20
Power Dissipation
PD
1.69
1.50
Junction Temperature
Storage Temperature
Thermal Resistance (Junction to Lead (4 pins))
Thermal Resistance
(Junction to Ambient Air)
Tj
Tstg
j-c
j-a
40 to +150 40 to +150
40 to +150 40 to +150
40
26
74
71
Conditions
C
C
C/W
C/W
Symbol
VIN
Io
Vo
Top
Parameter
Undervoltage lockout
Applications
Symbol
Ratings
4.5 or VO + 3* to 18
0 to 3.0
0.8 to 14
40 to +85
Unit
V
A
V
C
*: The minimum value of the input voltage range is 4.5 V or VO + 3 V, whichever is higher.
Electrical Characteristics
Parameter
Symbol
Reference Voltage
Temperature Coefficient of Reference Voltage
Efficiency
Oscillation Frequency
Line Regulation
Load Regulation
Overcurrent Protection Starting Current
Quiescent Circuit Current 1
Quiescent Circuit Current 2
Outflow Current at Low Voltage
SS Pin
Open Voltage
Inflow Current
EN Pin
On Threshold Voltage
Maximum ON Duty
Minimum ON Time
Thermal Protection Start Temperature
Thermal Protection Return Hysteresis
VREF
VREF/T
min.
0.784
fo
VLINE
VLoad
Is
IIN
IIN(off)
IEN/SS
VSSH
IEN
VC/EH
DMAX
DMIN
TSD
TSD_hys
280
Ratings
typ.
0.800
0.05
90
350
50
50
3.1
max.
0.816
420
6.0
6
0
6
0.7
151
10
3.0
50
1.4
90
150
165
20
10
14
100
2.1
Conditions
Unit
V
mV/
%
kHz
mV
mV
A
mA
A
A
V
A
V
%
nsec
Ta=40 to +85
VIN=6.3V to 18V
Io=0.1A to 3A
VEN=10k pull up to VIN
Io=0A, VEN=0V
VSS=0V
VEN=10V
*: Pin 8 is the SS pin. Soft start at power on can be performed with a capacitor connected to this pin.
The SS pin is pulled up to the power supply in the IC, so applying the external voltage is prohibited.
NR885K
NR885E
8
SS
C9
Soft start
22
ICs
NR885K/NR885E
External Dimensions
(Unit : mm)
NR885E
(eSOIC8)
1.50
NR885K
(HSOP8)
0.15
Pin Assignment
q BS
w VIN
e SW
r GND
t FB
y NC
u EN
i SS
*: The heat slug on the rear
side is at the ground
potential.
A2
A1
0.4
0.40
1.27
0.10
6.20
4.40
2.70
D1
Pin 1
Mark
E1
E2
2.90
0.695 TYP
5.20
MIN
0
1.398
0.33
4.8
3.053
5.893
3.73
2.033
0.508
A1
A2
D
D1
E
E1
E2
Package A
TYP
1.448
4.902
3.18
2.16
1.27
MAX
0.1524
1.498
0.508
5.004
3.307
6.918
3.89
2.287
0.762
MIN
0
1.25
0.38
4.8
3.1
5.8
3.8
2.2
0.45
Package B
TYP
0.1
1.4
4.9
3.3
6
3.9
2.4
1.27
0.6
MAX
0.15
1.65
0.51
5
3.5
6.2
4
2.6
0.8
Delivered in Package A or B.
Block Diagram
2
IN
OSC
Current
Sense
BS
3.5V
ON/
OFF
7
EN
OCP
P.REG
Drive
REG
5V
VREF
0.8V
SW
PWM
LOGIC
+
-
3
5V
TSD
Compensation
UVLO
6
+
+
Error Amp
NC
3.5V
FB
0.8V
10uA
SS
SS
GND
4
R3
7
C2
2
VIN
EN
C10
SW
NR885K
NR885E
C1
8
1
BS
SS
GND
4
R4
FB
Vout
L1
NC
6
R5
C9
Option
R6
D1
C4 C5
ICs
23
SI-8205NHD/SI-8205NHG Surface-Mount, Current Mode Control, Synchronous Rectifier Step-down Switching Mode
Features
Ratings
Unit
VIN
VSYNC
SI-8205NHG
46
5.5
Power Dissipation
PD
1.35
1.35
Oscillation frequency
Junction Temperature
Storage Temperature
Thermal Resistance (Junction to Lead <1 pin>)
Tj
Tstg
j-c
40 to +150
40 to +150
40
40 to +150
40 to +150
40
C
C
C/W
j-a
74
74
C/W
Undervoltage lockout
Soft start function
Conditions
V
V
Output current: 3 A
Applications
Symbol
SI-8205NHD
46
SI-8205NHD
Externally adjusted frequency type: 200 kHz to 1 MHz
SI-8205NHG
Externally synchronized frequency type: 300 kHz to 1 MHz
Parameter
Parameter
Symbol
VIN
VSYNC
IOUT
Vo
fSYNC
Top
Ratings
SI-8205NHD
8 or Vo+3* to 43
0 to 3.0
0.5 to 24
40 to +85
SI-8205NHG
7 or Vo+3* to 43
0 to 5
0 to 3.0
0.5 to 24
300 to 1000
40 to +85
Unit
V
V
A
V
kHz
C
*: The minimum value of the input voltage range is 8 V or Vo + 3V, whichever is higher.
Electrical Characteristics
Ratings
Parameter
Symbol
min.
Reference Voltage
Temperature Coefficient of
Reference Voltage
Efficiency
Oscillation Frequency 1
Oscillation Frequency 2
Internal Oscillation Frequency
Line Regulation
Load Regulation
Overcurrent Protection
Starting Current
Quiescent Circuit Current 1
Quiescent Circuit Current 2
Outflow Current
at Low Voltage
EN/SS
Pin
Open Voltage
On Threshold Voltage
Synchronization
Threshold Voltage
Synchronization
Frequency
OVP Start Voltage
Thermal Protection Start Temperature
Error Amplifier Voltage Gain
Error Amplifier Transformer Conductance
Current Sense Amplifier Impedance
SYNC
Pin
Maximum ON Duty
Minimum ON Time
24
ICs
VREF
Conditions
VREF/T
Conditions
Conditions
fo1
Conditions
fo2
Conditions
fo
Conditions
VoLINE
Conditions
VoLoad
Conditions
Is
Conditions
IIN
Conditions
IIN(off)
Conditions
IEN/SS
Conditions
VSSH
Conditions
VC/EH
Conditions
VSYNC
Conditions
FSYNC
Conditions
VOVP
Tj
AEA
GEA
GCS
DMAX
Conditions
DMIN
Conditions
0.495
SI-8205NHD
typ.
max.
0.5000
0.505
VIN=12V, IO=1.0A
0.05
VIN=12V, IO=1.0A, Ta=40 to +85C
90
VIN=12V, Vo=5V, IO=1.0A
200
VIN=12V, Vo=5V, Io=1A, Rfset=375k
1
VIN=12V, Vo=5V, Io=1A, Rfset=75k
50
VIN=8 to 43V, Vo=5V, Io=1A
50
VIN=12V, Vo=5V, Io=0.1 to 3.0A
3.1
6
VIN=12V, Vo=5V
8
VIN=12V, Vcomp=0V
40
VIN=12V, VEN/SS=0V
5
VEN/SS=0V, VIN=12V
3
4.5
6
VIN=12V
0.6
1.3
2.0
VIN=12V
0.57
0.60
0.63
151
160
800
800
3.33
80
90
VIN=12V
150
VIN=12V
min.
0.495
SI-8205NHG
typ.
Unit
max.
0.5000
0.505
VIN=14V, IO=1.0A
0.05
VIN=14V, IO=1.0A, Ta=40 to +85C
90
VIN=14V, Vo=5V, IO=1.0A
250
VIN=14V, Vo=5V, IO=1.0A SYNC=GND
50
VIN=8 to 43V, Vo=5V, Io=1A
50
VIN=12V, Vo=5V, Io=0.1 to 3.0A
3.1
6
VIN=14V, Vo=5V
12
VIN=14V, Vcomp=0V
35
VIN=14V, VEN/SS=0V
5
VEN/SS=0V, VIN=12V
3
4.5
6
VIN=14V
0.6
1.3
2.0
VIN=14V
1.85
VIN=14V, Vo=5V, IO=1.0A
300
1000.0
VIN=14V, Vo=5V, IO=1.0A
151
160
800
800
3.33
90
VIN=12V
250
VIN=12V
V
mV/C
%
kHz
MHz
kHz
mV
mV
A
mA
A
A
V
V
V
kHz
V
C
V/V
A/V
A/V
%
nsec
SI-8205NHD/SI-8205NHG
0.080.08
6.20
4.40
Pin 1 Mark
0.050.05
(Unit : mm)
Enlarged View of A
1.50
0.695 TYP
5.20
0.15
0.4
1.27
2.70
0.40
2.90
Block Diagram
SI-8205NHD
SI-8205NHG
VIN
VIN
+
REG_DRV
REG
REG_DEV
REG
REG
BS
OVC
STANDBY
OCP_CMP
RegOK
REG_UVLO
VinOK
H/S
Drv
BC
VIN_UVLO
REG_UVLO
Ramp
Phase_
logic
REG
LSoft
VIN_UVLO
PWR_stage
VinOK REG
L/S
Drv
Phase
Set PH
Fere Off
SYNC
Ramp
REG
Res PH
CUR_COMP
OVT
RegOK
VinOK
TSD
EN_SS
REG
OVT
BS_CHG
REG
OVT
Control_logic
TSD
BG
REG
RegOK
VinOK
INIT OVP
OVP
OVP_CMP
REG_BIAS
INIT_COMP
BG
STANDBY
PH Open
Fere_Off
Set PH
REG
REG
L/S
Drv
VinOK
BS_CHG
BG
REG_BIAS
SS_Ref
GATE_logic
REG
REG
OVT
Control_logic
SW
M2
Level
Shift
LSoft
Phase_
logic
REG
LSon
FB
VinOK
PH Open
Fere_Off
Set PH
M1
Level
Shift
VinOK
OSC_RAMP
REG
H/S
Drv
BG
REG
REG
STANDBY
LSoft
INIT PH
INIT CC
Res PH
CUR_COMP
Level
Shift
GATE_logic
FB
FSET
VinOK
SW
M2
Phase
Set PH
Fere Off
OSC_RAMP
OCP_CMP
RegOK
REG
VinOK REG
OVC
STANDBY
Level
Shift
VinOK
REG_DRV
REG_DRV
REG
BS
REG_BIAS STANDBY
M1
PWR_stage
REG
DRV_REG
REG_DEV
ICSpwm
ICSocp
REG_DRV
LSoff
Szse
1
CBchg
DRV_REG
REG
INIT PH
INIT CC
REG
REG_BIAS STANDBY
CUR_SUS
REG
ISNS
CUR_SUS
REG
FB
Ref
Err_AMP
STANDBY
REF
SS_Ref
SS
EN_SS
Rnf
STANDBY
SS_Rnf
REG
BG
Ref
REG
FB
Err_AMP
REF
Ref
SS_Ref
GND
GND
COMP
COMP
SI-8205NHG
R5
2
C1
3
VIN
EN/SS
C4
7
8
BS
SW
VIN
L1
C5
FSET
GND
1
R4
C1
FB
COMP
5
C3
GND
C6
Open
VO
2
SI-8205NHD
4
R5
R1
C1:10F/50V2 (murata:GRM55DB31H106KA87)
C2:22F/16V2 (murata:GRM32ER71A226KE20)
C3:270pF*1 (murata:GRM18 type)
C4:10F (murata: GRM18 type)
C5:1F (murata: GRM18 type)
L1:10H
D1: SJPB-L6 (Sanken)
GND
C5
SYNC
GND
1
FB
COMP
5
C3
GND
R2
R3
D1
R1:9k*1
R2:1k
R3:51k*1
R4:150k
R5:47
C4
7
8
BS
SW
L1
VO
SI-8205NHG
C2
3
VIN
EN/SS
C6
Open
C2
6
R1
GND
R2
R3
D1
C1:10F/50V2 (murata:GRM55DB31H106KA87)
C2:22F/16V2 (murata:GRM32ER71A226KE20)
C3:270pF*1 (murata:GRM18 type)
C4:0.1F (murata: GRM18 type)
C5:1F (murata: GRM18 type)
L1:10H
D1: SJPB-L6 (Sanken)
R1:9k*1
R2:1k
R3:51k*1
R5:20 to 47
ICs
25
SI-8000SD Series
Features
Lineup
Part Number
SI-8033SD
VO (V)
3.3
SI-8050SD
5.0
IO (A)
Parameter
Symbol
Ratings
Unit
DC Input Voltage
VIN
43*1
Power Dissipation*2
PD
W
C
Conditions
When mounted on glass-epoxy board 40 40 mm
(copper area: 100%)
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
j-c
C/W
Thermal Resistance
(Junction to Ambient Air)
j-a
33.3
C/W
Applications
Power supplies for telecommunication equipment
Onboard local power supplies
Symbol
SI-8033SD
SI-8050SD
5.5 to 28
7 to 40
Unit
VIN1
IO
0 to 3.0
V
A
Tjop
30 to +125
Top
30 to +125
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
SI-8033SD
min.
Output Voltage
Line Regulation
Load Regulation
Temperature Coefficient of Output Voltage
Overcurrent Protection
Starting Current
Start
f
Conditions
VO/Ta
20
5.0
5.2
79
84
VIN=20V, IO=1A
60
60
V
%
kHZ
VIN=20V, IO=1A
80
40
100
mV
10
40
0.5
0.5
mV
mV/C
3.1
VIN=15V
VIN=20V
0.2
0.2
30
Conditions
40
20
A
V
30
40
VSSL=0.2V
SI-8000SD
SI-8000SD
5 ON/OFF
5 ON/OFF
C3
VOUT. ON/OFF
ICs
max.
VIN=15V, IO=1A
* Pin 5 is a soft start pin. Soft start at power on can be performed with a capacitor connected to
this pin.
The output can also be turned ON/OFF with this pin.
The output is stopped by setting the voltage of this pin to VSSL or lower.
Soft-start pin voltage can be changed with an open-collector drive circuit of a transistor.
When using both the soft-start and ON/OFF functions together, the discharge current from C3
flows into the ON/OFF control transistor. Therefore, limit the current securely to protect the
transistor if C3 capacitance is large.
The ON/OFF pin is pulled up to the power supply in the IC, so applying the external voltage is
prohibited.
If this pin is not used, leave it open.
26
Unit
typ.
VIN=20V, IO=1A
3.1
Conditions
ISSL
4.8
10
Conditions
Outflow Current at
Low Voltage
3.43
VOLOAD
VSSL
3.3
25
Conditions
Low-Level Voltage
min.
VIN=15V, IO=1A
VOLINE
IS1
max.
VIN=15V, IO=1A
Conditions
Oscillation Frequency
Pin*
3.17
Efficiency
Soft
VO
Conditions
SI-8050SD
typ.
Soft start
SI-8000SD
5 ON/OFF
C3
Soft start
+VOUT. ON/OFF
SI-8000SD Series
(Unit : mm)
0.2
10.0
(4.4)
1.2
0.2
4.5
15.30
0.3
0.3
0.1
0.2
0.3
2.0
2.54
0.2
(0.75)
(R0.3)
0 to 6
(0.5)
0.1
0.1
0.8
0.25
)
(1.7
0.25
(1.7
)
1
0.2
2.4
(R0.3)
4.9
15.3
9.2
0.2
0.15
0.10
(3)
(3)
4.9
0.10
0.88
0.2
(2R0.45)
(3)
(6.8)
0.2
1.5 Dp:
1.3 +0.10
0.05
9.2
(4.6)
3-R0.3
(1.75)
(15)
Pin Assignment
q VIN
w SWOUT
e GND
r VOS
t S.S
(8.0)
0.2
(0.40)
Case temperature
measurement point
(1.7
0.25
0.8
0.25
(1.7
)
0.2
9.9
(3)
(3)
2-R0.3
0.02
10.0
Block Diagram
Reference Data
Copper Laminate Area on Glass Epoxy Board vs.
thermal resistance (junction to ambient air) (Typical Value)
VIN
SWOUT
2
Thermal resistance (junction to ambient air)
j-a (C/W)
Overcurrent
protection
Internal power
supply
Oscillator
Reset
Thermal
protection
Comparator
VOS
Error
amplifier
Reference voltage
S.S
55
50
With glass epoxy board of 40 40 mm
45
40
35
30
0
200
400
600
800
1000
1200
1400
1600
1800
GND
VIN
SWOUT
VIN
SI-8000SD
C1
S.S
5
GND
3
VOS
VOUT
4
+
D1
C2
C1 : 50V/1000F
C2 : 50V/1000F
C3 : 0.01F
(only when soft start function is used)
L1 : 150H
D1 : SJPB-L6 (Sanken)
C3
GND
GND
Diode D1
Be sure to use Schottky-barrier diode as D1.
If other diodes like fast recovery diodes are used, ICs may be destroyed because of the reverse voltage generated by the recovery voltage or ON
voltage.
Choke coil L1
If the winding resistance of the choke coil is too high, the efficiency may drop below the rated value.
As the overcurrent protection starting current is about 3.5 A, take care concerning heat radiation from the choke coil caused by magnetic saturation
due to overload or short-circuited load.
Capacitors C1, C2, and C3
As large ripple currents flow through C1 and C2, use high-frequency and low-impedance capacitors aiming for switching-mode-power-supply use.
Especially when the impedance of C2 is high, the switching waveform may become abnormal at low temperatures.
For C2, do not use a capacitor with an extremely low equivalent series resistance (ESR) such as an OS capacitor or a tantalum capacitor, which may
cause an abnormal oscillation.
C3 is a capacitor for soft start. Leave pin 5 open if the soft start function is not used.
This pin is pulled up with a pull-up resistor inside the ICs.
To create the optimum operating conditions, place the components as close as possible to each other.
ICs
27
SPI-8000A Series
Features
Parameter
(Ta=25C)
Symbol
Ratings
Unit
DC Input Voltage
VIN
53
Power Dissipation
PD*1, *2
2.4
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
j-c*2
18
C/W
j-a*2
50
C/W
Applications
Onboard local power supplies
OA equipment
For stabilization of the secondary-side output voltage of switching power supplies
Symbol
Unit
SPI-8010A
VIN
(8 or Vo+3)*1 to 50
VO
1 to 14
IO
0.02 to 3.0*2
Tjop
30 to +125
Top
30 to +125
*1: The minimum value of an input voltage range is the higher of either 8V or VO+3V.
*2: Please be sure to let the output current run more than 20 mA. When using by less than 20 mA, there is a possibility that the output voltage becomes unstable.
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
Reference Voltage
Line Regulation
Load Regulation
Temperature Coefficient of
Reference Voltage
Overcurrent Protection
Starting Current
Quiescent Circuit Current
Circuit Current at Output OFF
1.00
1.03
Conditions
kHZ
VIN=12V, IO=1A
20
VOLINE
Conditions
40
mV
VOLOAD
Conditions
30
mV
VREF/Ta
mV/C
0.5
3.1
Conditions
Iq
Conditions
VIN=12V
7
mA
VIN=12V, IO=0A
Iq(off)
Conditions
400
VIN=12V, VON/OFF=0.3V
VSSL
0.5
Outflow Current at
Low Voltage
ISSL
50
Conditions
* Pin 4 is the CE/SS pin. Soft start at power on can be performed with a capacitor connected to
this pin. The output can also be turned ON/OFF with this pin. The output is stopped by setting
the voltage of this pin to VSSL or lower. CE/SS-pin voltage can be changed with an opencollector drive circuit of a transistor. When using both the soft-start and ON/OFF functions
together, the discharge current from C4 flows into the ON/OFF control transistor. Therefore,
limit the current securely to protect the transistor if C3 capacitance is large.
The CE/SS pin is pulled up to the power supply in the IC, so applying the external voltage is
prohibited.
VSSL=0V
ICs
SPI-8000A
SPI-8000A
SPI-8000A
4 CE/SS
4 CE/SS
4 CE/SS
C4
VO. ON/OFF
28
86
FOSC
IS
max.
VIN=12V, IO=1A
Conditions
Oscillation Frequency
Terminal
0.97
Eff
Efficiency
CE/SS
VREF
Conditions
Unit
typ.
Soft start
C4
Soft start
+VO. ON/OFF
SPI-8000A Series
(Unit : mm)
1+0.1/-0.05
(Heatsink thickness)
10.50.2
9
10.50.3
2.50.2
2.75MAX
2.0+0.2/-0.08
16
0.25+0.15/-0.05
0.10
Pin Assignment
1.AGND
2.N.C
3.DGND
4.CE/SS
5.Reg
6.N.C
7.SWOUT
8.N.C
9.N.C
10.N.C
11.VIN
12.B.S
13.N.C
14.Comp
15.VREF
16.N.C
12.20.2
(Gate remains: Not included in dimensions)
(11)
(4.5)
7.50.2
(2)
16
1.270.25
0.4+0.15/-0.05
Block Diagram
SPI-8010A
VIN
UVLO
CE/SS
P.REG
OCP
CE/SS
BS
Boot REG
TSD
DRIVE
Reg
OSC
+
-
PWM
LOGIC
SWOUT
VREF
Comp
Amp
+
1V
GND
ICs
29
B.S
R1
L1
C3
11
VIN
VIN
SPI-8010A
SWOUT
V0
7
4
C1
D1 R2
CE/SS
C7
14
C5
DGND VREF
+
C2
15
R3
C8
IREF
C6
GND
GND
C1: 220F/63V
C2: 470F/25V
C3: 0.1F
C4: 1000pF
C5: 0.1F
C6: 0.047F
C7: 0.1F
C8: 0.1F
R1: 47
L1: 47H
D1: SJPB-L6
(Sanken)
Diode D1
Be sure to use a Schottky-barrier diode for D1. If other diodes like fast recovery diodes are used, ICs may be destroyed because of the reverse voltage
generated by the recovery voltage or ON voltage.
Choke coil L1
If the winding resistance of the choke coil is too high, the efficiency may drop below the rated value.
As the overcurrent protection starting current is about 4.5A, take care concerning heat radiation from the choke coil caused by magnetic saturation due to
overload or short-circuited load.
Capacitors C1, C2
As large ripple currents flow through C1 and C2, use high-frequency and low-impedance capacitors aiming for switching-mode-power-supply use. Especially
when the impedance of C2 is high, the switching waveform may become abnormal at low temperatures. For C2, do not use a capacitor with an extremely low
equivalent series resistance (ESR) such as an OS capacitor or a tantalum capacitor, which may cause an abnormal oscillation.
Resistors R2, R3
R2 and R3 are the resistors to set the output voltage. Set their values so that IREF becomes approx. 2mA. Obtain R2 and R3 values by the following formula:
R2=
VREF
(VOUTVREF) (VOUT1)
1
.=500()
=
(), R3 =
=
.
IREF
2103
IREF
2103
To create the optimum operating conditions, place the components as close as possible to each other.
Ta-PD Characteristics
3.00
PD=VO IO
2.50
j-a:41.7C/W(30.8cm2)
j-a:47.6C/W(8.64cm2)
Note 1: The efficiency depends on the input voltage and the output current. Therefore, obtain the value from the efficiency graph and
substitute the percentage in the formula above.
Note 2: Thermal design for D1 must be considered separately.
2.00
j-a:62.5C/W(0.84cm2)
1.50
VO : Output voltage
VIN : Input voltage
IO : Output current
: Efficiency (%)
VF : Diode D1 forward voltage
1.00
0.50
0
30
25
50
75
100
30
ICs
100
VO
1 VF IO 1
VIN
125
ICs
31
SI-8000Q Series Surface Mount, Current Mode Control Step-down Switching Mode
Features
Symbol
Ratings
Unit
Input Voltage
VIN
30
Power Dissipation*1
PD
1.35
Junction Temperature*2
Tj
30 to +150
Storage Temperature
Tstg
40 to +150
j-c
40
C/W
j-a
74
C/W
Parameter
Conditions
When mounted on glass-epoxy board, 3030 mm (copper laminate area: 2525 mm)
When mounted on glass-epoxy board, 3030 mm (copper laminate area: 2525 mm)
Applications
DVD recorder, FPD-TV
Onboard local power supplies
OA equipment
Symbol
Unit
SI-8005Q
Vo+3*1
VIN
VO
0.5 to 24
to 28
IO
0 to 3.5
Tjop
30 to +125
Top
30 to +85
Conditions
V
V
*1: The minimum value of the input voltage range is 4.75 V or Vo +3 V, whichever is higher.
Electrical Characteristics
Parameter
SI-8005Q
Symbol
min.
Reference Voltage
Temperature Coefficient of Reference Voltage
VADJ
0.485
Conditions
Oscillation Frequency
Line Regulation
Load Regulation
Overcurrent Protection Starting Current
VADJ/T
0.500
0.515
0.05
Conditions
Conditions
VIN=12V, Io=1A
450
Conditions
550
30
Conditions
60
VOLOAD
Conditions
60
Conditions
6.0
VIN=12V
Iq
18
Conditions
EN Pin
20
Conditions
Conditions
VIN=16V, VSSL=0V
ISSL
Vc/EN
2.2
VIN=12V
Conditions
VEN=0V
IC/EH
mV
A
VIN=12V
Vc/EL
Conditions
mV
2.8
Conditions
kHz
mA
Iq(OFF)
SS Pin
VIN=16V, Io=1A
VOLINE
IS
500
V
mV/ C
90
fo
max.
VIN=12V, Io=1A
Efficiency
Unit
typ.
AEA
1000
V/V
GEA
800
A/V
1/GCS
0.35
V/A
Maximum ON Duty
DMAX
92
Minimum ON Time
DMIN
100
nsec.
*: Pin 8 is the SS pin. Soft start at power on can be performed with a capacitor connected to this pin.
The SS pin is pulled up to the power supply in the IC, so applying the external voltage is prohibited.
SI-8008Q
8 SS
C8
32
ICs
Soft start
SI-8000Q Series
Pin Assignment
1BS
2IN
3SW
4GND
5FB
6COMP
7EN
0.080.08
6.20
4.40
Pin 1 Mark
0.050.05
(Unit : mm)
Enlarged View of A
1.50
0.695 TYP
5.20
0.15
8SS
0.4
1.27
0.40
Flammability: UL 94V-0
2.90
Block Diagram
2
IN
Current
Sense
Amp
OSC
Boot
REG
OCP
5v_ldo
P.REG
1
BS
VREF
0.5V
PWM
LOGIC
ON
OFF
7
EN
OVP
TSD
Drive
3
SW
5v_ldo
6
COMP
5
FB
Amp
UVLO
0.5V
4
GND
8
SS
VIN
2
IN
1
BS
EN
C4
R1
SI-8000Q
8
C1
SS
GND
COMP
6
C5
C6
OPEN
C3
R3
VO
L1
SW 3
FB 5
D1
GND
4
VFB
C2
R2
IADJ
GND
C1:10F/50V
(Murata:GRM55DB31H106KA87)
C2:22F/16V
(Murata:GRM32ER71A226KE20)
C3:560pF*1
(Murata:GRM18 Type)
C4:10nF
(murata: GRM18 Type)
C5:10nF
(murata: GRM18 Type)
L1:10H
D1:SJPW-T4 (Sanken)
R1:46k (Vo=5V)
R2:5.1k
R3:24k *1
*1: When Vo=5V
ICs
33
Features
Surface-mount package (TO263-5)
Part Number
SI-8001FDE
SI-8001FDL
VO(V)
IO(A)
3.5
Function
Variable(0.8 to 24)
Soft start
ON/OFF
Symbol
Input Voltage
- SI-8001FDE
Built-in on/off function (active Low)
- SI-8001FDL
Low current consumption during off
- SI-8001FDL
Ratings
SI-8001FDE SI-8001FDL
VIN
43
Unit
Conditions
Vc
Power Dissipation*1
PD
VIN
Junction Temperature*2
Tj
+150
Storage Temperature
Tstg
40 to +150
j-c
3*1
C/W
When mounted on glass-epoxy board measuring 4040 mm (copper laminate area: 100%)
j-a
33.3*1
C/W
When mounted on glass-epoxy board measuring 4040 mm (copper laminate area: 100%)
When mounted on glass-epoxy board measuring 4040 mm (copper laminate area: 100%)
Applications
DVD recorder, FPD-TV
OA equipment, such as printers
Onboard local power supplies
Ratings
Symbol
SI-8001FDE
Unit
SI-8050FDL
VIN
Output Voltage Range
VO
Output Current Range
IO
Operating Junction Temperature Range
Tjop
Operating Temperature Range
Top
*1: The minimum value of the input voltage range is 4.5 V or Vo + 3 V, whichever is higher.
Input Voltage Range
Vo+3*1 to 40
0.8 to 24
0 to 3.5
30 to +100
30 to +85
Electrical Characteristics
Parameter
Symbol
SI8001FDE
min.
Reference Voltage
Temperature Coefficient of Reference Voltage
VADJ/T
Conditions
Line Regulation
Load Regulation
Overcurrent Protection Starting Current
fO
min.
0.800
0.816
0.784
83
83
VIN=15V, Io=2A
VIN=15V, Io=2A
300
330
50
mV
50
mV
3.6
VIN=15V
6
0.5
30
VIN=15V, VSS=0V
Vc, IL
Ic, IH
2.0
V
6
100
Vc=2V
Iq
VIN=15V, Io=0A
A
mA
VIN=15V, Io=0A
600
30
VIN=15V, Vss=0V
*1: Pin 5 is the SS pin. Soft start at power on can be performed with a capacitor connected to
this pin. The output can also be turned ON/OFF with this pin. The output is stopped by
setting the voltage of this pin to VSSL or lower. SS-pin voltage can be changed with an
open-collector drive circuit of a transistor. When using both the soft-start and ON/OFF
functions together, the discharge current from C3 flows into the ON/OFF control transistor.
Therefore, limit the current securely to protect the transistor if C3 capacitance is large. The
SS pin is pulled up (3.7 V typ.) to the power supply in the IC, so applying the external
voltage is prohibited. If this pin is not used, leave it open.
*2: Output is OFF when the output control terminal VC is open. Each input level is equivalent to
0.8
Conditions
200
VIN=15V
Conditions
kHz
3.6
Conditions
80
Iq(OFF)
mV/ C
Vc, IH
300
80
Conditions
VIN=15V, Io=2A
270
Conditions
ISSL
330
VIN=15V, Io=2A
VOLOAD
VSSL
0.816
0.1
Conditions
Outflow Cuurent
0.800
VIN=15V, Io=0.2A
VOLINE
IS
max.
0.1
270
Conditions
Unit
typ.
Conditions
max.
VIN=15V, Io=0.2A
Conditions
Oscillation Frequency
ON/OFF Pin*2
0.784
Conditions
Efficiency
SS Pin*1
VADJ
SI8001FDL
typ.
200
VIN=15V, Vc=2V
SI-8001FDE
5 SS
SI-8001FDE
5 SS
C3
SI-8001FDE
5 SS
C3
VO.ON/OFF
34
ICs
Soft start
Soft start
+Vo. On/OFF
SI-8000FD Series
(Unit : mm)
10.0
4.5
(4.4)
0.2
+0.10
1.3 0.05
(R0.3)
0 to 6
(0.5)
0.1
0.8
0.25
)
(1.7
0.25
)
1
4
9.9
0.2
(6.8)
0.2
2.54
4.9
0.3
2.0
2.4
(R0.3)
0.1
(1.7
9.2
0.3
0.1
0.2
(0.75)
0.2
0.10
15.30
15.3
9.2
0.3
0.15
0.10
(3)
(3)
4.9
0.88
Pin Assignment
1 IN
2 SW
3 GND (Common to the rear side of the
product)
4 VADJ
5 SS or Vc
(2R0.45)
(3)
0.2
1.5 Dp:
(4.6)
3-R0.3
0.2
(1.75)
1.2
(15)
0.2
(8.0)
0.2
(0.40)
Case temperature
measurement point
(1.7
0.8
0.25
(1.7
)
0.25
0.2
(3)
(3)
2-R0.3
10.0
0.02
Block Diagram
SI-8001FDE
SI-8001FDL
SW
IN
PReg.
SW
VIN
PReg.
OCP
5 SS
OCP
5 VC
ON/OFF
Soft
start
Latch &
Drive
Reset
Latch &
Drive
Reset
ON/OFF
OSC
OSC
+
ADJ
VADJ
TSD
Comp.
Error Amp.
TSD
Comp.
Error Amp.
+
+
VREF
VREF
GND
GND
3
L1
1
VIN
SW
IN
SI-8000FDE
+
C1
SS
5
GND
3
L1
VOUT
VIN
SI-8001FDL
R1
ADJ 4
+
C2
R2
Di
SW
IN
+
C1
Vc
5
GND
3
IADJ
VOUT
R1
ADJ 4
+
C2
R2
Di
IADJ
C3
GND
GND
C1
C2
C3
L1
Di
: 470F
: 680F
: 0.1 (Only when using soft-start function)
: 47H
: FMB-G16L (Sanken)
GND
GND
C1
C2
L1
Di
: 470F
: 680F
: 47H
: FMB-G16L (Sanken)
ICs
35
Symbol
Ratings
Unit
Input Voltage
VIN
43
Power Dissipation*1
PD
Junction Temperature*2
Tj
+150
Storage Temperature
Tstg
40 to +150
j-c
C/W
When mounted on glass-epoxy board measuring 4040 mm (copper laminate area: 100%)
j-a
33.3
C/W
When mounted on glass-epoxy board measuring 4040 mm (copper laminate area: 100%)
Parameter
Conditions
When mounted on glass-epoxy board measuring 4040 mm (copper laminate area: 100%)
Applications
DVD recorder, FPD-TV
Onboard local power supplies
OA equipment
Ratings
Symbol
Unit
SI-8008HD
VIN
Vo+3*1 to 40
VO
0.8 to 24
IO
0 to 5.5
Tjop
30 to +100
Top
30 to +85
Conditions
VIN Vo+3V
*1: The minimum value of the input voltage range is 4.5 V or Vo+3 V, whichever is higher.
Electrical Characteristics
Paramter
Symbol
SI-8008HD
min.
VADJ
Reference Voltage
0.784
Conditions
max.
0.800
0.816
Oscillation Frequency
(VADJ/T)
0.1
Conditions
Conditions
VIN=15V, Io=3A
Conditions
VIN=15V, Io=3A
IS
20
5.6
50
6.5
Conditions
mV
7.5
VIN=15V
VSSL
0.5
ISSL
10
Conditions
VSSL=0V
Conditions
VIN=15V, Io=0A
30
Iq(OFF)
*1: Pin 5 is the SS pin. Soft start at power on can be performed with a capacitor connected to
this pin. The output can also be turned ON/OFF with this pin.
The output is stopped by setting the voltage of this pin to VSSL or lower. SS-pin voltage
can be changed with an open-collector drive circuit of a transistor. When using both the
soft-start and ON/OFF functions together, the discharge current from C3 flows into the ON/
OFF control transistor. Therefore, limit the current securely to protect the transistor if C3
capacitance is large. The SS pin is pulled up (3.7 V typ.) to the power supply in the IC, so
applying the external voltage is prohibited. If this pin is not used, leave it open.
mA
200
400
VIN=15V, VSS=0V
SI-8008HD
SI-8008HD
5 SS
5 SS
C3
VO.ON/OFF
ICs
mV
Conditions
36
80
Iq
Quiescent Circuit Current
kHz
60
Conditions
150
VOLOAD
SS Pin*1
fo
Conditions
Load Regulation
mV/C
83
VOLINE
Line Regulation
VIN=15V, Io=1A
Efficiency
Unit
typ.
Soft start
SI-8008HD
5 SS
C3
Soft start
+Vo. On/OFF
SI-8000HD Series
(Unit : mm)
0.2
10.0
(8.0)
0.2
1.2
(4.4)
0.2
4.5
+0.10
1.3 0.05
(2R0.45)
(3)
0.3
0.15
0.10
(3)
0.1
(3)
0.2
2.4
(R0.3)
0.2
2.54
(R0.3)
0.25
0.1
0.8
0.25
)
(1.7
)
1
Flammability: UL 94V-0
0 to 6
(0.5)
0.1
(1.7
4.9
0.3
2.0
(0.75)
0.2
4.9
0.10
0.88
15.30
15.3
9.2
0.3
0.2
(6.8)
0.2
1.5 Dp:
Pin Assignment
1 IN
2 SW
3 GND
4 ADJ
5 SS
0.2
(4.6)
3-R0.3
9.2
(15)
(1.75)
(0.40)
Case temperature
measurement point
(1.7
0.25
0.8
0.25
(1.7
)
0.2
9.9
(3)
(3)
2-R0.3
0.02
10.0
Block Diagram
SI-8008HD
1
SW
IN
PReg.
OCP
5 SS
ON/OFF
Soft
start
Latch &
Drive
Reset
OSC
+
ADJ
TSD
Comp.
Error Amp.
GND
+
+
VREF
Reference Data
L1
SW
IN
SI-8008HD
+
C1
C4
SS
5
GND
3
VOUT
R1
ADJ 4
+
R2
C2
Di
C3
GND
GND
C1
C2
C3
C4
: 1500F
: 1000F
: 0.1F (Only when using soft-start function)
: 4.7F (GMR32ER71H475KA88L (Murata Manufacturing)
recommended)
L1 : 100H
Di : FMB-G16L (Sanken)
Thermal Resistance
(junction to ambient air temperature) j-a (C/W)
VIN
55
When using glass-epoxy board measuring 4040 mm
50
45
40
35
30
0
200
400
600
800
1000
1200
1400
1600
1800
ICs
37
SI-8000E Series
Features
Lineup
Part Number
SI-8050E
VO(V)
5.0
IO(A)
0.6
DC Input Voltage
Power Dissipation
Applications
Power supplies for telecommunication
equipment
Symbol
Ratings
VIN
43
PD1
PD2
Unit
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
j-c
7.0
C/W
j-a
66.7
C/W
Symbol
Unit
SI-8050E
VIN
7 to 40
IO
0 to 0.6
V
A
Tjop
30 to +125
Top
30 to +125
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
SI-8050E
Symbol
VO
Output Voltage
min.
4.80
Conditions
Load Regulation
Temperature Coefficient of Output Voltage
Overcurrent Protection Starting
Current
38
ICs
Conditions
%
kHZ
VIN=20V, IO=0.3A
80
Conditions
100
mV
VOLOAD
Conditions
VO/Ta
IS1
60
VOLINE
Conditions
5.20
VIN=20V, IO=0.3A
Line Regulation
5.00
80
Conditions
Oscillation Frequency
max.
VIN=20V, IO=0.3A
Efficiency
Unit
typ.
0.5
40
mV
mV/C
0.61
VIN=10V
SI-8000E Series
(Unit : mm)
4.2
0.2
2.8
(17.9)
16.90.3
4.00.2
7.90.2
0.5
0.2
3.20.2
0.2
10.0
2.60.1
(2.0)
Pin Assignment
q VIN
w SWOUT
e GND
r VOS
t N.C
0.15
(4.6)
+0.2
0.85 0.1
(8.0)
0.95
+0.2
0.45 0.1
P1.70.74=6.80.7
3.90.7
1 2 3 4 5
(4.3)
8.20.7
Block Diagram
5V : 200H
VIN
2 SWOUT
OCP
VIN
Reg.
OSC
TSD
Reset
Drive
Comp.
2
VIN
SI-8000E
C1
100F
4 VOS
Amp.
D1
AK06
(Sanken)
VOS
GND
3
VREF
L1
NC
+
C2
330F
GND
3
GND
VO
SWOUT
GND
5
N.C
Ta-PD Characteristics
Infinite heatsink
0
10
m
2m
0
10
20
0
10
m
(5
75
.2
7
C/
5
W
2m
)
m
(7.
6
C/
W)
.3
VO
VIN
IO
x
VF
/
C
Without heatsink
0
30
25
50
100
VO
1 VFIO 1
VIN
(2
0
2m
PD=VOIO
The efficiency depends on the input voltage and the output current. Therefore, obtain the value from the efficiency graph and
substitute the percentage in the formula above.
20
15
75
100
125
:
:
:
:
:
Output voltage
Input voltage
Output current
Efficiency (%)
Diode D1 forward voltage
0.4V(AK06)
ICs
39
Lineup
Part Number
SI-8015JF
SI-8033JF
SI-8050JF
SI-8120JF
VO (V)*
1.59
3.3
5.0
12.0
IO (A)
1.5
Symbol
Ratings
VIN
43
PD1
DC Input Voltage
Power Dissipation
Unit
PD2
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
j-c
6.0
C/W
Applications
Power supplies for telecommunication equipment
Onboard local power supplies
Symbol
Unit
Conditions
SI-8015JF*
SI-8033JF
SI-8050JF
SI-8120JF
VIN1
VO+2 to 40
5.3 to 40
7 to 40
14 to 40
IO=0 to 1A
VIN2
VO+3 to 40
6.3 to 40
8 to 40
15 to 40
IO=0 to 1.5A
VINVO+3V
IO
0 to 1.5
Tjop
30 to +125
* SI-8015JF is a variable output voltage type. The variable output voltage range is from 2.5 V to 24 V.
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Output Voltage*1
Line Regulation
Load Regulation
Temperature Coefficient of
Output Voltage*3
Overcurrent Protection
typ.
max.
min.
typ.
max.
min.
typ.
max.
1.558
1.59
1.622
3.234
3.30
3.366
4.90
5.00
5.10
11.76
12.00
12.24
VIN=12V, IO=0.5A
Starting Current
VIN=12V, IO=0.5A
VIN=20V, IO=0.5A
VIN=24V, IO=0.5A
77
82
88
VIN=15V, IO=0.5A
VIN=20V, IO=0.5A
VIN=24V, IO=0.5A
125
125
125
125
Conditions
VIN=12V, IO=0.5A
25
10
VIN=20V, IO=0.5A
VIN=24V, IO=0.5A
25
40
60
80
10
10
30
0.5
1.0
1.6
VIN=15V
VIN=20V
0.5
0.5
0.5
0.5
ISSL
100
100
100
100
Quiescent Circuit
Current
Conditions
Iq(OFF)
Conditions
VSSL=0V
VSSL=0V
VSSL=0V
VIN=12V, IO=0A
VIN=15V, IO=0A
VIN=20V, IO=0A
VIN=24V, IO=0A
200
VIN=12V, VON/OFF=0.3V
200
VIN=15V, VON/OFF=0.3V
VSSL=0V
200
VIN=20V, VON/OFF=0.3V
VIN=24V, VON/OFF=0.3V
mA
SI-8000JF
SI-8000JF
SI-8000JF
5 ON/OFF
5 ON/OFF
5 ON/OFF
C3
VOUT. ON/OFF
ICs
200
*5: Pin 5 is the ON/OFF pin. Soft start at power on can be performed with a capacitor connected
to this pin.
The output can also be turned ON/OFF with this pin. The output is stopped by setting the
voltage of this pin to VSSL or lower. ON/OFF-pin voltage can be changed with an open-collector drive circuit of a transistor. When using both the soft-start and ON/OFF functions together,
the discharge current from C3 flows into the ON/OFF control transistor. Therefore, limit the
current securely to protect the transistor if C3 capacitance is large. The ON/OFF pin is pulled
up to the power supply in the IC, so applying the external voltage is prohibited. If this pin is not
used, leave it open.
40
mV
VIN=24V
VSSL
Iq
mV
mV/ C
Outflow Current
Conditions
kHZ
1.6
40
0.5
1.6
VIN=12V
40
130
10
0.5
1.6
100
30
VO/Ta*4
VIN=15V, IO=0.5A
80
VOLOAD
Conditions
VIN=15V, IO=0.5A
67
VOLINE
IS1
Unit
SI-8120JF
min.
Conditions
SI-8050JF
max.
Conditions
Conditions
SI-8033JF
typ.
Conditions
Oscillation Frequency
Terminal
VO*2
SI-8015JF
min.
Efficiency
ON/OFF*5
Symbol
Soft start
C3
Soft start
+VOUT. ON/OFF
SI-8000JF Series
(17.9)
16.90.3
3.20.2
4.20.2
0.2
2.8
0.2
4.00.2
7.90.2
10.0
(Unit : mm)
Pin Assignment
q VIN
w SWOUT
e GND
r VOS
t ON/OFF
(2.0)
2.60.1
0.15
(4.6)
+0.2
0.85 0.1
(8.0)
0.95
+0.2
0.45 0.1
P1.7
0.7
4=6.8
0.7
3.90.7
(4.3)
8.20.7
Forming No.1101
1 2 3 4 5
Block Diagram
SI-8015JF
SW OUT
VIN
PReg.
SW OUT
VIN
PReg.
OCP
5 ON/OFF
OCP
5 ON/OFF
ON/OFF
Soft
Start
Latch&
Drive
Reset
ON/OFF
Soft
Start
OSC
+
VREF
TSD
Comp.
Error Amp.
Latch&
Drive
Reset
OSC
+
TSD
Comp.
Error Amp.
VREF
VREF
GND
GND
VIN
SW
VIN
SI-8015JF
+
220F
VREF
L1
VOUT
C4
R1
R2
SW
VIN
SI-8000JF
+
ON/OFF GND
5
3
VIN
470F
C1
Di
ON/OFF GND
5
3
VS
VOUT
4
+
Di
C2
REF
C3
GND
GND
GND
GND
IREF
50V/220F
25V/470F
10V/0.47F (Only when using soft-start function)
6800pF
VREF (R1+R2)
100H
VOUT=
RK16 (Sanken)
R2
C1
C2
C3
L1
Di
:
:
:
:
:
50V/220F
25V/470F
10V/0.47F (Only when using soft-start function)
100H
RK16 (Sanken)
ICs
41
Lineup
Part Number
SI-8008TFE
VO (V)
SI-8050TFE
5
IO (A)
1.5
DC Input Voltage
Power Dissipation
Parameter
Symbol
Ratings
Unit
VIN
43
PD1-1
PD1-2
PD2-1
PD2-2
Tj
30 to +150
Storage Temperature
Tstg
40 to +150
j-c
C/W
j-a
58
C/W
Applications
Onboard local power supplies
AV equipment
OA equipment
Conditions
Limited by thermal protection, Tjmax=150C
Tjmax=125C
*: This product has built-in thermal protection circuits that may operate when the junction temperature rises above 130C.
The recommended design for the junction temperature during operation is below 125C.
Symbol
VIN
VO
SI-8008TFE
SI-8050TFE
Vo+3*1 to 40
0.8 to 24
8 to 40
5.0
Tjop
Top
(Ta=25C)
V
V
A
0 to 1.5
20 to +125
20 to +85
IO
Unit
C
C
*1: The minimum value of an input voltage range is the higher of 4.5 V or VO + 3 V.
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
SI-8008TFE
typ.
min.
Output Voltage
Reference Voltage
Temperature Coefficient of Output Voltage
Temperature Coefficient of Reference Voltage
Vo
VADJ
0.784
Conditions
Vo/T
VREF/T
Conditions
Efficiency
Conditions
Oscillation Frequency
Conditions
Outflow Current at
Low Voltage
Conditions
10
VSSL=0V
Conditions
6
VIN=15V, Io=0A
Conditions
200
VIN=15V, VSS=0V
Iq(OFF)
mV/C
80
40
400
0.5
40
200
VIN=15V, VSS=0V
SI-8000TFE
5 SS
mV
mV
A
10
VSSL=0V
V
A
mA
400
SI-8000TFE
5 SS
SI-8000TFE
5 SS
C3
VO.ON/OFF
ICs
40
6
VIN=15V, Io=0A
*: Pin 5 is the SS pin. Soft start at power on can be performed with a capacitor connected to this
pin. The output can also be turned ON/OFF with this pin. The output is stopped by setting the
voltage of this pin to VSSL or lower. SS-pin voltage can be changed with an open-collector
drive circuit of a transistor. When using both the soft-start and ON/OFF functions together, the
discharge current from C3 flows into the ON/OFF control transistor. Therefore, limit the current securely to protect the transistor if C3 capacitance is large. The SS pin is pulled up to the
power supply in the IC, so applying the external voltage is prohibited. If the pin is not used,
leave it open.
42
80
VIN=15V
0.5
40
%
kHz
1.6
VIN=15V
Iq
VIN=15V, Io=0.1A
0.5
1.6
Conditions
VSSL
ISSL
0.816
300
VIN=15V, Io=0.5A
60
VIN=10 to 30V, Io=0.5A
10
VIN=15V, Io=0.2 to 1.5A
VOLOAD
IS
max.
5.10
300
VIN=15V, Io=0.5A
60
VIN=10 to 30V, Io=0.5A
10
VIN=15V, Io=0.2 to 1.5A
fo
Conditions
Overcurrent Protection
Starting Current
Unit
SI-8050TFE
typ.
5.00
min.
4.90
VOLINE
Load Regulation
max.
0.1
VIN=15V, Io=0.1A, Tc=0 to 100C
81
VIN=15V, Io=0.5A
Conditions
Line Regulation
0.800
VIN=15V, Io=0.1A
Ratings
Soft start
C3
Soft start
+VO.ON/OFF
SI-8000TFE Series
(Unit : mm)
0.2
4.2
0.2
2.8
3.20.2
0.5
0.2
(2.0)
2.60.1
Pin Assignment
q IN
w SW
e GND
r ADJ
t SS
(17.9)
16.90.3
4.00.2
7.90.2
10.0
0.15
(4.6)
+0.2
4.60.6
0.95
0.85 0.1
+0.2
P1.70.74=6.80.7
0.45 0.1
3.90.7
(4.3)
8.20.7
1 2 3 4 5
Block Diagram
SW
IN
5 SS
Latch &
Drive
Reset
SW
IN
SI-8000TFE
C1
220F
SS
5
GND
3
VOUT
R1
ADJ 4
+
R2
Di
C2
470F
IADJ
C3
OSC
+
ON/OFF
Soft Start
Overcurrent
Protection
PReg.
Thermal ADJ
Protection
4
Comp.
Error Amp.
+
+
VIN
SI-8008TFE
Reference
Voltage
GND
3
GND
GND
C1 : 220F
C2 : 470F
C3 :1F (Only when using soft-start function)
L1 : 47H
Di : RK16 (Sanken)
ICs
43
SI-8000GL Series
Features
Symbol
Ratings
DC Input Voltage
Parameter
VIN
53
Unit
V
Power Dissipation
PD*1
W
C
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
j-c
28
C/W
j-a
100
C/W
Applications
Onboard local power supplies
OA equipment
For stabilization of the secondary-side output voltage of switching power supplies
Parameter
Unit
SI-8010GL
VIN
(8 or VO+3)*1 to 50
VO
1 to 14
IO
0.02 to 1.5*2
Tjop
30 to +125
Top
30 to +125
*1: The minimum value of an input voltage range is the higher of either 8V or VO+3V.
*2: Please be sure to let the output current run more than 20 mA. When using by less than 20 mA, there is a possibility that the output voltage becomes unstable.
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
Reference Voltage
0.97
FOSC
Conditions
Temperature Coefficient
of Reference Voltage
Overcurrent Protection
Starting Current
Quiescent Circuit Current
Circuit Current at Output OFF
40
VOLOAD
Conditions
30
1.6
Conditions
Iq
Conditions
7
400
VIN=12V, VON/OFF=0.3V
VSSL
0.5
Terminal Outflow
Current at Low Voltage
ISSL
50
*: Pin 2 is the CE/SS pin. Soft start at power on can be performed with a capacitor
connected to this pin.The output can also be turned ON/OFF with this pin. The output is
stopped by setting the voltage of this pin to VSSL or lower. CE/SS-pin voltage can be
changed with an open-collector drive circuit of a transistor.
When using both the soft-start and ON/OFF functions together, the discharge current
from C4 flows into the ON/OFF control transistor. Therefore, limit the current securely to
protect the transistor if C3 capacitance is large. The CE/SS pin is pulled up to the power
supply in the IC, so applying the external voltage is prohibited.
VSSL=0V
ICs
A
V
SI-8000GL
SI-8000GL
SI-8000GL
2 CE/SS
2 CE/SS
2 CE/SS
C4
VO. ON/OFF
44
mA
VIN=12V, IO=0A
Conditions
mV
VIN=12V
Iq(OFF)
Conditions
mV
mV/C
0.5
VREF/Ta
IS
kHZ
VIN=12V, IO=1A
20
V
%
250
Conditions
Load Regulation
1.03
VOLINE
Line Regulation
1.00
86
Conditions
Oscillation Frequency
max.
VIN=12V, IO=1A
Eff
Efficiency
CE/SS*
Terminal
VREF
Conditions
Unit
typ.
Soft start
C4
Soft start
+VO. ON/OFF
SI-8000GL Series
6.50.2
(Unit: mm)
Pin Assignment
1. GND
2. CE/SS
3. Reg
4. SWOUT
5. VIN
6. BS
7. Comp
8. VREF
1.0+0.3
-0.05
1.5+0.3
-0.05
7.6
7.50.5
4.20.3
3.40.1
9.40.3
+0.1
0.25-0.
05
3.30.2
0.50.1
0.25 M
2.54
0 to 15
0.89 TYP
Block Diagram
Ta-PD Characteristics
SI-8010GL
PD=VO IO
1.8
UVLO
CE/SS
P.REG
VIN
OCP
CE/SS
BS
Boot REG
TSD
DRIVE
Reg
OSC
PWM
LOGIC
SWOUT
100
VO
1 VF IO 1
VIN
1.6
Note 1: The efficiency depends on the input voltage and the output current. Therefore, obtain the value from the efficiency graph and
substitute the percentage in the formula
above.
Note 2: Thermal design for D1 must be considered
separately.
1.4
1.2
j-a:100C/W
1
0.8
0.6
0.4
0.2
0
25
VREF
Comp
Amp
+
25
50
75
100
125
GND
VO : Output voltage
VIN : Input voltage
IO : Output current
: Efficiency
VF : Diode D1 forward voltage
RK160.4V(IO=1A)
BS
R1
L1
C3
VIN
VIN
SI-8010GL
V0
SWOUT
4
2
C1
D1 R2
CE/SS
C7
Reg
3
C4
C5
Comp
GND
VREF
+
C2
8
R3
C8
IREF
C1: 220F/63V
C2: 470F/25V
C3: 0.1F
C4: 1000pF
C5: 0.1F
C6: 0.047F
C7: 0.1F
C8: 0.1F
R1: 47
L1: 47H
D1: RK16
(Sanken)
C6
VREF
(VOUTVREF) (VOUT1)
1
.
GND
=
=
(), R3 =
R2=
=
. 500()
2103
IREF
2103
IREF
Diode D1
Be sure to use a Schottky-barrier diode as D1. If other diodes like fast recovery diodes are used, IC may be destroyed because of the reverse voltage generated
by the recovery voltage or ON voltage.
Choke coil L1
If the winding resistance of the choke coil is too high, the efficiency may drop below the rated value.
As the overcurrent protection starting current is approx. 2.5 A, take care concerning heat radiation from the choke coil caused by magnetic saturation due to
overload or short-circuited load.
Capacitor C1, C2
As large ripple currents flow through C1 and C2, use high-frequency and low-impedance capacitors aiming for switching-mode-power-supply use. Especially
when the impedance of C2 is high, the switching waveform may become abnormal at low temperatures. For C2, do not use a capacitor with an extremely low
equivalent series resistance (ESR) such as an OS capacitor or a tantalum capacitor, which may cause an abnormal oscillation.
Resistors R2, R3
R2 and R3 are the resistors to set the output voltage. Set their values so that IREF becomes approx. 2 mA. Obtain R2 and R3 values by the following formula above.
GND
* To create the optimum operating conditions, place the components as close as possible to each other.
ICs
45
NR887D Current
Full-Mold,
Mode Control,
Separate Synchronous
Excitation Step-down
Rectifier
Switching
Step-down
Mode Switching
Regulator ICs
Mode
Features
Parameter
Symbol
Ratings
Unit
Input Voltage
Power Dissipation
Junction Temperature
Storage Temperature
Thermal Resistance (Junction to Lead (4 pins))
Thermal Resistance (Junction to Ambient Air)
VIN
PD
Tj
Tstg
j-c
j-a
20
1.50
40 to +150
40 to +150
25
67
V
W
C
C
C/W
C/W
Conditions
Parameter
Ratings
4.5 or VO + 3* to 18
0 to 2.0
0.8 to 14
40 to +85
Unit
V
A
V
C
*: The minimum value of the input voltage range is 4.5 V or VO + 3 V, whichever is higher.
Applications
Electrical Characteristics
Parameter
Symbol
Reference Voltage
Temperature Coefficient of Reference Voltage
Efficiency
Oscillation Frequency
Line Regulation
Load Regulation
Overcurrent Protection Starting Current
Quiescent Circuit Current 1
Quiescent Circuit Current 2
Outflow Current at Low Voltage
SS Pin
Open Voltage
Inflow Current
EN Pin
On Threshold Voltage
Maximum ON Duty
Minimum ON Time
Thermal Protection Start Temperature
Thermal Protection Return Hysteresis
VREF
VREF/T
min.
0.784
fo
VLINE
VLoad
Is
IIN
IIN(off)
IEN/SS
VSSH
IEN
VC/EH
DMAX
DMIN
TSD
TSD_hys
400
Ratings
typ.
0.800
0.05
90
500
50
50
3.1
max.
0.816
600
6.0
6
0.7
151
10
3.0
50
1.4
90
150
165
20
10
14
100
2.1
Conditions
Unit
V
mV/
%
kHz
mV
mV
A
mA
A
A
V
A
V
%
nsec
Ta=40 to +85
VIN=6.3V to 18V
Io=0.1 to 2.0A
VEN=10 pull up to VIN
Io=0A, VEN=0V
VSS=0V
VEN=10V
*: Pin 8 is the SS pin. Soft start at power on can be performed with a capacitor connected to this pin.
The SS pin is pulled up to the power supply in the IC, so applying the external voltage is prohibited.
NR887D
SS
C9
Soft start
46
ICs
NR887D
6.50.2
(Unit : mm)
Pin Assignment
q BS
w VIN
e SW
r GND
t FB
y NC
u EN
i SS
1.0+0.3
-0.05
1.5+0.3
-0.05
7.6
7.50.5
4.20.3
3.40.1
9.40.3
3.30.2
+0.1
0.25-0.
05
0.50.1
0.25 M
2.54
0 to 15
0.89 TYP
Block Diagram
2
IN
OSC
Current
Sense
BS
3.5V
ON/
OFF
7
EN
P.REG
Drive
REG
OCP
5V
VREF
0.8V
SW
+
-
PWM
LOGIC
3
5V
TSD
Compensation
UVLO
6
FB
+
+
Error Amp
NC
3.5V
0.8V
10uA
SS
SS
GND
4
VIN
R3
2
VIN
7
EN
C2
1
BS
C10
SW
NR887D
C1
8
SS
GND
4
R4
FB
Vout
L1
NC
6
R5
C9
Option
R6
D1
C4 C5
ICs
47
Lineup
Part Number
SI-8033S
SI-8050S
SI-8090S
SI-8120S
SI-8150S
VO(V)
3.3
5.0
9.0
12.0
15.0
IO(A)
3.0
Parameter
Symbol
Ratings
VIN
43*
PD1
PD2
Tj
+125
Storage Temperature
Tstg
40 to +125
VSW
j-c
5.5
C/W
DC Input Voltage
Power Dissipation
Junction Temperature
Unit
Applications
Power supplies for telecommunication equipment
Onboard local power supplies
Symbol
SI-8033S
SI-8050S
SI-8090S
SI-8120S
SI-8150S
5.5 to 28
7 to 40
12 to 40
15 to 40
18 to 40
Unit
VIN
IO
0 to 3.0
Tjop
30 to +125
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
SI-8033S
min.
SI-8000S*1
Output Voltage
SI-8000SS
VO
Conditions
Conditions
Oscillation Frequency
Line Regulation
Load Regulation
Temperature Coefficient of
Output Voltage
Overcurrent Protection
Starting Current
Soft
Start
Pin*2
VSSL
Outflow Current at
Low Voltage
ISSL
min.
typ.
max.
min.
typ.
max.
8.55
9.00
9.45
11.50
12.00
12.50
14.25
15.00
15.75
4.80
5.00
5.20
5.00
5.10
VIN=20V, IO=1.0A
ICs
V
VIN=21V, IO=1.0A
VIN=24V, IO=1.0A
VIN=25V, IO=1.0A
79
84
88
90
91
VIN=15V, IO=1.0A
VIN=20V, IO=1.0A
VIN=21V, IO=1.0A
VIN=24V, IO=1.0A
VIN=25V, IO=1.0A
60
60
60
60
60
VIN=15V, IO=1.0A
VIN=20V, IO=1.0A
VIN=21V, IO=1.0A
VIN=24V, IO=1.0A
VIN=25V, IO=1.0A
25
40
50
60
60
80
100
120
130
10
10
10
10
10
30
40
40
40
%
kHZ
130
mV
40
mV
VIN=15V, IO=0.5 to 1.5A VIN=20V, IO=0.5 to 1.5A VIN=21V, IO=0.5 to 1.5A VIN=24V, IO=0.5 to 1.5A VIN=25V, IO=0.5 to 1.5A
0.5
0.5
3.1
15
1.0
3.1
1.0
3.1
3.1
VIN=20V
VIN=21V
VIN=24V
VIN=25V
0.2
25
0.2
25
0.2
25
0.2
25
0.2
25
35
15
35
Conditions
15
35
15
mV/C
1.0
3.1
VIN=15V
*1:S may be printed to the right of the marking (except SI-8090S, SI-8120S, SI-8150S).
*2:Pin 5 is a soft start pin. Soft start at power on can be performed with a capacitor connected to
this pin.
The output can also be turned ON/OFF with this pin.
The output is stopped by setting the voltage of this pin to VSSL or lower.
Soft-start pin voltage can be changed with an open-collector drive circuit of a transistor.
When using both the soft-start and ON/OFF functions together, the discharge current from C3
flows into the ON/OFF control transistor. Therefore, limit the current securely to protect the
transistor if C3 capacitance is large.
The ON/OFF pin is pulled up to the power supply in the IC, so applying the external voltage is
prohibited.
If this pin is not used, leave it open.
48
Unit
max.
4.90
Conditions
Low-Level Voltage
SI-8150S
typ.
3.43
VIN=15V, IO=1.0A
SI-8120S
min.
3.366
VO/Ta
IS1
SI-8090S
max.
3.30
VOLOAD
Conditions
typ.
3.30
VOLINE
Conditions
min.
3.17
f
Conditions
SI-8050S
max.
3.234
Efficiency
typ.
35
15
A
V
35
VSSL=0.2V
SI-8000S
SI-8000S
SI-8000S
5 ON/OFF
5 ON/OFF
5 ON/OFF
C3
VOUT. ON/OFF
Soft start
C3
Soft start
+VOUT. ON/OFF
SI-8000S Series
(Unit : mm)
0.2
4.2
2.80.2
3.20.2
0.5
0.2
(17.9)
16.90.3
4.00.2
7.90.2
10.0
Pin Assignment
q VIN
w SWOUT
e GND
r VOS
t S.S
(2.0)
2.60.1
0.950.15
(8.0)
(4.6)
+0.2
0.85 0.1
+0.2
0.45 0.1
P1.70.74=6.80.7
3.90.7
(4.3)
8.20.7
1 2 3 4 5
Block Diagram
VIN 1
2 SWOUT
OCP
Reg.
OSC
Reset
Drive
Comp.
TSD
4 VOS
Amp.
VREF
5 S.S.
3 GND
L1
2
VIN
SI-8000S
VO
SWOUT
D1
C1
C2
VOS
S.S
GND
C1,2 : 1000F
L1 : 150H
D1 : RK46(Sanken)
GND
GND
Ta-PD Characteristics
PD=VOIO
20
Infinite heatsink
15
2002002mm
(2.3C/W)
1001002mm
10 (5.2C/W)
5
Without heatsink
0
25
25
50
75
100
VFIO 1
VO
VIN
The efficiency depends on the input voltage and the output current.
Therefore, obtain the value from the efficiency graph and substitute the percentage in the formula above.
VO
VIN
IO
x
VF
75752mm
(7.6C/W)
100
1
:
:
:
:
:
Output voltage
Input voltage
Output current
Efficiency (%)
Diode D1 forward voltage
0.5V(RK46)
125
ICs
49
DIP8 package
Symbol
Ratings
Unit
Input Voltage
Parameter
VIN
30
Power Dissipation*1
PD
1.56
Junction Temperature*2
Tj
30 to +150
Storage Temperature
Tstg
40 to +150
j-c
25
C/W
j-a
64
C/W
Conditions
When mounted on glass-epoxy board measuring 7060 mm (copper laminate area: 1310 mm2)
When mounted on glass-epoxy board measuring 7060 mm (copper laminate area: 1310 mm2)
Applications
Symbol
Ratings
Unit
SI-8105QL
Vo+3*1
VIN
Vo
0.5 to 24
Io
0 to 3.5
OA equipment
Tjop
30 to +125
Top
30 to +85
to 28
Conditions
V
V
*1: The minimum value of the input voltage range is 4.75 V or Vo +3 V, whichever is higher.
Electrical Characteristics
Parameter
Symbol
SI-8105QL
min.
VADJ
Reference Voltage
0.485
Conditions
Oscillation Frequency
(VADJ/T)
Conditions
VIN=12V, Io=1A
fo
315
Conditions
30
30
EN Pin
60
60
6.0
Conditions
VIN=12V
Conditions
18
Iq(OFF)
SS Pin
385
Iq
Quiescent Circuit Current
VIN=16V, Io=1A
Conditions
Is
350
Conditions
VIN=12V, VSSL=0V
ISSL
VC/EH
VIN=12V
Conditions
VIN=12V
Conditions
VEN=0V
VC/EL
5
mV
A
V
2.2
IC/EH
mV
2.8
Conditions
kHz
mA
20
Conditions
V
mV/ C
90
VoLOAD
0.515
Conditions
Conditions
Load Regulation
0.500
0.05
VoLINE
Line Regulation
max.
VIN=12V, Io=1A
Efficiency
Unit
typ.
V
A
AEA
1000
V/V
GEA
800
A/V
1/GCS
0.35
V/A
Maximum ON Duty
DMAX
92
Minimum ON Time
DMIN
100
nsec.
*: Pin 8 is the SS pin. Soft start at power on can be performed with a capacitor connected to this pin.
The SS pin is pulled up to the power supply in the IC, so applying the external voltage is prohibited.
SI-8100QL
8 SS
C5
Soft start
50
ICs
SI-8100QL Series
6.50.2
(Unit : mm)
4.20.3
3.40.1
9.40.3
1.0+0.3
-0.05
7.50.5
Pin Assignment
1 BS
2 IN
3 SW
4 GND
5 FB
6 COMP
7 EN
8 SS
7.6
1.5+0.3
-0.05
+0.1
0.25-0.
05
3.30.2
0.50.1
2.54
0.25 M
0 to 15
0.89 TYP
Block Diagram
2
IN
Current
Sense
Amp
OSC
P.REG
Boot
REG
OCP
5v_ldo
1
BS
VREF
0.5V
ON
OFF
7
EN
PWM
LOGIC
Drive
3
SW
OVP
TSD
5v_ldo
6
COMP
5
FB
Amp
UVLO
0.5V
4
GND
8
SS
VIN
2
IN
1
BS
EN
C4
R1
SI-8105QL
8
C1
SS
GND
COMP
6
C5
C6
OPEN
C3
R3
VO
L1
SW 3
FB 5
D1
GND
VFB
C2
R2
IADJ
GND
C1:10 F/50V
(Murata: GRM55DB31H106KA87)
C2:22 F/16V
(Murata: GRM32ER71A226KE20)
C3:560pF*1
(Murata: GRM18 Type)
C4:10nF
(Murata: GRM18 Type)
C5:10nF
(Murata: GRM18 Type)
L1:10 H
D1:SJPW-T4 (Sanken)
R1:46k (When Vo = 5 V)
R2:5.1k
R3:24k*1
*1: When Vo=5V
ICs
51
Lineup
Part Number
SI-8001FFE
Vo (V)
Io (A)
3.5
Function
Soft start
Applications
Symbol
Ratings
VIN
43
Power Dissipation
PD1-1
22.7
PD1-2
18.2
Power Dissipation
PD2-1
2.15
(Without heatsink)
PD2-2
1.72
Tj
+150
Junction
Temperature*1
Unit
SI-8001FFE
Tj=125C
Tj=125C
Storage Temperature
Tstg
40 to +150
j-c
5.5
C/W
j-a
58
C/W
Conditions
*: This product has built-in thermal protection circuits that may activate when the junction temperature exceeds 130C.
The recommended design for the junction temperature during IC operation is below 125C.
Ratings
Symbol
Unit
SI-8001FFE
Vo+3*1
VIN
VO
0.8 to 24
to 40
IO
0 to 3.5
Tjop
30 to +125
Top
30 to +85
*: The minimum value of the input voltage range is 4.5 V or Vo +3 V, whichever is higher.
Electrical Characteristics
Parameter
Symbol
SI-8001FFE
min.
VADJ
Reference Voltage
0.784
Conditions
Oscillation Frequency
VADJ/T
Conditions
VIN=15V, Io=2A
fo
270
IS
kHz
80
mV
50
mV
Conditions
VIN=15V
VSSL
0.5
ISSL
6
Conditions
VIN=15V, VSS=0V
Conditions
VIN=15V, Io=0A
30
Iq(OFF)
*: Pin 5 is the SS pin. Soft start at power on can be performed with a capacitor connected to
this pin. The output can also be turned ON/OFF with this pin.
The output is stopped by setting the voltage of this pin to VSSL or lower. SS-pin voltage
can be changed with an open-collector drive circuit of a transistor. When using both the
soft-start and ON/OFF functions together, the discharge current from C3 flows into the ON/
OFF control transistor. Therefore, limit the current securely to protect the transistor if C3
capacitance is large. The SS pin is pulled up (3.7 V typ.) to the power supply in the IC, so
applying the external voltage is prohibited. If this pin is not used, leave it open.
mA
200
600
VIN=15V, Vss=0V
SI-8000FFE
5 SS
SI-8000FFE
5 SS
C3
VO.ON/OFF
ICs
330
55
Conditions
52
VIN=15V, Io=2A
Iq
Quiescent Circuit Current
mV/ C
300
Conditions
Conditions
83
VOLOAD
0.816
Conditions
Conditions
Load Regulation
0.800
0.1
VOLINE
Line Regulation
max.
VIN=15V, Io=0.2A
Efficiency
Unit
typ.
Soft start
SI-8000FFE
5 SS
C3
Soft start
+Vo. ON/OFF
SI-8000FFE Series
(Unit : mm)
0.2
4.2
0.2
2.8
3.20.2
0.5
0.2
4.00.2
7.90.2
10.0
q IN
w SW
e GND
r ADJ
t SS
(17.9)
16.90.3
Pin Assignment
(2.0)
2.60.1
0.950.15
Flammability: UL 94V-0
4.60.6
(4.6)
+0.2
0.85 0.1
+0.2
P1.70.74=6.80.7
0.45 0.1
3.90.7
(4.3)
8.20.7
1 2 3 4 5
Block Diagram
SW
IN
PReg.
OCP
5 SS
ON/OFF
Soft
start
Latch &
Drive
Reset
OSC
+
ADJ
TSD
Comp.
Error Amp.
+
+
VREF
GND
3
VIN
SW
IN
SI-8001FFE
+
C1
SS
5
GND
3
VOUT
R1
ADJ 4
+
C2
R2
Di
IADJ
C3
GND
GND
C1
C2
C3
L1
D1
:470F
:680F
:0.1F(Only when using soft-start function)
:47H
:RK46(Sanken)
ICs
53
NR111D
Features
Unit
VBS-SW
VSW
VFB
VEN
VSS
35
44
8
35
5.5
35
5.5
V
V
V
V
V
V
V
Power Dissipation
PD
1.47
Junction Temperature
Storage Temperature
Thermal Resistance (Junction to Lead (4 pins))
Tj
Tstg
j-c
30 to +150
40 to +150
41
C
C
C/W
j-a
85
C/W
Symbol
Input Voltage
BS Pin Voltage
Pin Voltage between BS and SW
SW Pin Voltage
FB Pin Voltage
EN Pin Voltage
SS Pin Voltage
VIN
VBS
Conditions
Applications
Ratings
NR111D
Parameter
Parameter
Ratings
NR111D
Symbol
VIN
IOUT
Vo
Top
Unit
6.5 or Vo+3* to 31
0 to 4.0**
0.8 to 24
40 to 85**
V
A
V
*: The minimum value of the input voltage range is indicated value or VO + 3 V, whichever is higher.
**: The device must be used within the range indicated by the Ta-PD characteristics.
Electrical Characteristics
Parameter
Symbol
min.
Reference Voltage
Temperature Coefficient of Output Voltage
Oscillation Frequency
Line Regulation
Load Regulation
Overcurrent Protection Starting Current
No-load Circuit Current
Quiescent Circuit Current
SS Pin
Outflow Current at Low Voltage
Inflow Current
EN Pin
On Threshold Voltage
ISET Pin Open Voltage
Maximum ON Duty
Minimum ON Time
Thermal Protection Start Temperature
Thermal Protection Return Hysteresis
SW MOSFET ON Resistance
VREF
VREF/T
fSW
VLINE
VLoad
Is1
Is2
IIN
IIN(off)
IEN/SS
IEN
VC/EH
VISET
DMAX
TON(MIN)
TSD
TSD_hys
RonH
0.784
6
0.7
151
Ratings
NR111D
typ.
0.800
0.05
350
50
50
1.5
5.5
1
1
10
20
1.4
1.5
90
150
165
20
105
Unit
Conditions
max.
0.816
14
50
2.1
V
mV/C
kHz
mV
mV
A
A
mA
A
A
A
V
V
%
nsec
C
C
m
Ta=40C to +85C
VIN=VINmin to 30V
VIN=12V, Vo=5.0V, IO=0.1 to Iomax
ISET=OPEN
ISET=SHORT
VEN=10k pull up to VIN
Io=0A, VEN=0V
VSS=0V
VEN=10V
*: Pin 8 is the SS pin. Soft start at power on can be performed with a capacitor connected to this pin.
The SS pin is pulled up to the power supply in the IC, so applying the external voltage is prohibited.
NR111D
SS
C9
Soft start
54
ICs
NR111D
(Unit : mm)
type A
type B
9.40.127
9.20.2
NR111D
*4
SK
Pin Assignment
q BS
w VIN
e SW
r GND
t FB
y ISET
u EN
i SS
*1
*1
NR111D
*4
*2
SK
6.350.127
*2
6.40.2
*3
*3
7.9380.3175
(1.524)
(1.524)
7.620.3
6.350.127
0.2032 to 0.3810
3.3020.127
0.381min
0.2820.078
(2.54)
3.4
4.01X.X
0.2
3.30.3
3.3020.254
0.51min
0.4750.095
0.762
8.636
0.356 to 0.559
8.70.3
(1.524)
(1.524)
Block Diagram
2
OSC
7
ON/
OFF
EN
P.REG
Current
Sense
Amp
OCP
1
Drive
REG
BS
OCP_REF
VREF
0.8V
PWM
LOGIC
6
ISET
IN
SW
OCP_REF
ISET
Compensation
FB
OVP
FB
0.8V
Err Amp
UVLO
SS
TSD
GND
5
FB
SS
VIN
R3
VIN_S
R1
C2
C1
2
IN
7
EN
SS
GND
4
Vo_s
R5
FB
ISET
6
5
R4
C9
R6
R7
D1
SW
Vo
L1
NR111D
8
GND
C10
1
3
BS
SW
C4 C5
GND
C1
C2
C4
C5
C9
C10
R1
R3
R4
R5
R6
R7
L1
: 10F / 35V
: 10F / 35V
: 22F / 16V
: 22F / 16V
: 0.1F
: 0.1F
: 1.7M
: 22
: 20k
: 470 (Vo=5.0V)
: 3.9k
: 0k (When ISET SHORT)
: 10H
ICs
55
Lineup
Part Number
SI-8008HFE
VO (V)
SI-8050HFE
5
IO (A)
5.5
Parameter
Symbol
Ratings
Unit
VIN
43
PD1-1
PD1-2
PD2-1
PD2-2
Tj
+150
Storage Temperature
Tstg
40 to +150
j-c
C/W
j-a
58
C/W
DC Input Voltage
Power Dissipation
Applications
Junction Temperature*
Conditions
Limited by thermal protection, Tjmax=150C
Tjmax=125C
*: This product has built-in thermal protection circuits that may operate when the junction temperature rises above 130C.
The recommended design for the junction temperature during operation is below 125C.
Symbol
VIN
VO
SI-8008HFE
SI-8050HFE
Vo+3*1 to 40
0.8 to 24
8 to 40
5.0
Tjop
Top
(Ta=25C)
V
V
A
0 to 5.5
30 to +125
30 to +85
IO
Unit
C
C
*1: The minimum value of an input voltage range is the higher of 4.5 V or VO + 3 V.
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Output Voltage
Reference Voltage
Symbol
Vo
VADJ
Vo/T
VADJ/T
Efficiency
0.784
Conditions
Conditions
Oscillation Frequency
SI-8008HFE (at Vo = 5 V)
max.
min.
typ.
Conditions
Conditions
Outflow Current at
Low Voltage
50
VIN=15V
Conditions
10
VSSL=0V
Conditions
6
VIN=15V, Io=0A
Conditions
200
VIN=15V, VSS=0V
Iq(OFF)
400
0.5
30
200
VIN=15V, VSS=0V
SI-8000HFE
5 SS
mV
mV
A
10
VSSL=0V
V
A
mA
400
SI-8000HFE
5 SS
C3
VOUT. ON/OFF
ICs
50
6
VIN=15V, Io=0A
*: Pin 5 is the SS pin. Soft start at power on can be performed with a capacitor connected to this
pin. The output can also be turned ON/OFF with this pin. The output is stopped by setting the
voltage of this pin to VSSL or lower. SS-pin voltage can be changed with an open-collector
drive circuit of a transistor. When using both the soft-start and ON/OFF functions together, the
discharge current from C3 flows into the ON/OFF control transistor. Therefore, limit the current securely to protect the transistor if C3 capacitance is large. The SS pin is pulled up to the
power supply in the IC, so applying the external voltage is prohibited. If the pin is not used,
leave it open.
56
80
VIN=15V
0.5
30
%
kHz
5.6
Conditions
Iq
mV/C
80
5.6
VSSL
ISSL
VIN=15V, Io=1A
0.5
150
VIN=15V, Io=3A
60
VIN=10 to 30V, Io=3A
20
VIN=15V, Io=0.2 to 5.5A
VOLOAD
IS
0.816
150
VIN=15V, Io=3A
60
VIN=10 to 30V, Io=3A
20
VIN=15V, Io=0.2 to 5.5A
fo
Conditions
Overcurrent Protection
Starting Current
max.
5.10
VOLINE
Load Regulation
0.800
VIN=15V, Io=1A
Unit
SI-8050HFE
typ.
5.00
min.
4.90
0.1
VIN=15V, Io=1A, Tc=0 to 100C
83
VIN=15V, Io=3A
Conditions
Line Regulation
Ratings
Soft start
SI-8000HFE
5 SS
C3
Soft start
+VOUT. ON/OFF
SI-8000HFE Series
(Unit : mm)
0.2
4.2
0.2
2.8
3.20.2
0.5
0.2
(17.9)
16.90.3
4.00.2
7.90.2
10.0
Pin Assignment
q VIN
w SW
e GND
r ADJ (VOS for SI-8050HFE)
t SS
(2.0)
2.60.1
(4.6)
+0.2
4.60.6
0.950.15
0.85 0.1
+0.2
P1.70.74=6.80.7
0.45 0.1
3.9
0.7
(4.3)
8.20.7
1 2 3 4 5
Block Diagram
SI-8050HFE
SI-8008HFE
SW
IN
Overcurrent
Protection
PReg.
5 SS
ON/OFF
Soft Start
Overcurrent
Protection
PReg.
5 SS
Latch &
Drive
Reset
SW
IN
ON/OFF
Soft Start
Latch &
Drive
Reset
OSC
OSC
Thermal ADJ
Protection
4
Comp.
Error Amp.
Reference
Voltage
GND
GND
Vos
Thermal
Protection
Comp.
Error Amp.
+
+
+
+
Reference
Voltage
VIN
C1
1
+
SW
IN
C4
VOUT
Di
PReg.
5 ON/OFF
C2
VIN
C1
1
+
SW
IN
C4
VOUT
+
Di
PReg.
C2
5 ON/OFF
R1
SI-8008HFE
SI-8050HFE
C3
C3
ADJ 4
C1
C2
C3
C4
L1
Di
ADJ
+
+
R2
GND
GND
: 1500F
: 1000F
:1F (Only when using soft-start function)
:4.7F (RPER11H475K5 (Murata Manufacturing) recommended)
:100H
: FMB-G16L (Sanken)
ICs
57
Parameter
Input Voltage
Symbol
Ratings
VIN
45
Unit
V
PD1
PD2
Junction Temperature
Tj
30 to +150
Storage Temperature
Tstg
40 to +150
j-c
C/W
j-a
66.7
C/W
Applications
AV equipment
OA equipment
Gaming equipment
Onboard local power supplies
Symbol
Parameter
SI-8010Y
SI-8050Y
Unit
VIN
8 or VO+3* to 43
8 to 43
Vo
1 to 15
Io
0 to 8.0
Tjop
30 to +135
Top
30 to +85
*: The minimum value of the input voltage range is 8 V or Vo + 3V, whichever is higher.
Electrical Characteristics
Ratings
Parameter
Symbol
SI-8010Y*
mIN.
Output Voltage
(Reference voltage for SI-8010Y)
VO(VREF)
0.98
Conditions
Conditions
Efficiency
Conditions
Oscillation Frequency
Line Regulation
Load Regulation
Overcurrent Protection Starting Current
fo
Conditions
VOLINE
Iq
Quiescent Circuit Current
Conditions
Iq(OFF)
Conditions
Outflow Current at
Low Voltage
EN/SS Pin*
ISSL
Conditions
1.00
1.02
4.90
AEA
max.
5.00
5.10
VIN=30V, Io=0.1A
0.1
0.5
86
86
VIN=30V, Io=3A
VIN=30V, Io=3A
130
130
VIN=30V, Io=3A
VIN=30V, Io=3A
90
mV/C
kHz
90
30
90
VIN=30V, Io=0.1 to 8A
8.1
8.1
VIN=20V
8
8
VIN=30V, Io=0A, EN/SS=open
500
VIN=30V, EN/SS=0V
10
200
VIN=30V, EN/SS=0V
mV
mA
500
VIN=30V, EN/SS=0V
30
mV
VIN=20V
30
VIN=30V, Io=0.1 to 8A
VSSL
Conditions
Unit
typ.
VIN=30V, Io=0.1A
30
Conditions
Is
mIN.
VOLOAD
Conditions
max.
30
Conditions
SI-8050Y
typ.
10
30
VIN=30V, EN/SS=0V
0.5
0.5
A
A
V
VIN=30V
VIN=30V
300
300
V/V
GEA
800
800
A/V
1/GCS
0.16
0.16
V/A
Maximum ON Duty
DMAX
92
92
Minimum ON Time
DMIN
200
200
nsec
58
ICs
SI-8000Y
SI-8000Y
5 SS
5 SS
C6
C6
Soft start
Soft start
+VOUT. ON/OFF
SI-8000Y Series
(Unit : mm)
10.00.2
4.20.2
2.80.2
3.20.2
7.90.2
Pin Assignment
q BS
w SW
e VIN
r GND
t COMP
y FB
u EN/SS
7.60.1
(Measured at the root)
(3-R1)
6-0.740.15
100.5
2.8
17.60.7
16.90.3
4.00.2
0.5
Gate burr
+0.2
6-0.65 0.1
(5.3)
R-end
+0.2
0.45 0.1
6P1.270.157.620.15
4.30.5
3.60.5
0.5
1 234 567
0.5
Plan View
Block Diagram
SI-8010Y
SI-8050Y
IN
Pre
REG
Current
Sence
Amp
OSC
Pre
REG
UVLD
TSD
OCP
EN/SS
EN/
SS
SW
6
1.0V
BS
DRIVE
PWM
LOGIC
UVLD
TSD
OCP
EN/SS
5 COMP
Boot
5vREG
BS
DRIVE
PWM
LOGIC
EN/
SS
Current
Sence
Amp
OSC
Boot
5vREG
IN
SW
5 COMP
FB
Amp
1.0V
FB
Amp
GND
GND
Csn1 Rsn1
Vin
Vin
3
C1 + C2
IN
EN/SS
C6
C5
1
BS SW
3
L1
SI-8010Y
C1 + C2
D1
R1
COMP
GND
4
C4
Vo
FB
IN
EN/SS
C3
+
C6
R2
Csn2
BS SW
L1
SI-8050Y
COMP
GND
Vo
D1
6
C4
C7
C5
C3
+
FB
Csn2
C7
R3
Rsn2
GND
R3
GND
SI-8010Y
C1:2200F/50V
Csn1,2=2200pF (When Vin>40V)
C2:4.7F/50V
Rsn1,2=10 (When Vin>40V)
C3:470F/25V
C4:1200pF*1
C5:0.22F/50V
C7:680pF*1
L1:47H
D1:FMW-2156 (Sanken)
R1:8k*1
R2:2k
R3:39k*1
*1: When Vo=5V
GND
Rsn2
GND
SI-8050Y
C1:2200F/50V
Csn1,2=2200pF (When Vin>40V)
C2:4.7F/50V
Rsn1,2=10 (When Vin>40V)
C3:470F/25V
C4:1200pF
C5:0.22F/50V
C7:680pF
L1:56H
D1:FMW-2156 (Sanken)
R3:39k
ICs
59
Lineup
Part Number
SI-8401L
SI-8501L
VO(V)
5.0
5.0
IO(A)
0.5
1.0
Parameter
Applications
Ratings
Symbol
DC Input Voltage
VIN
Power Dissipation
PD
SI-8400L
Unit
SI-8500L
35
1.25
Junction Temperature
Tj
+100
Storage Temperature
Tstg
25 to +85
Ratings
Symbol
Unit
SI-8401L
VIN
7 to 33
IO
0 to 0.5
Top
20 to +85
Parameter
Ratings
Symbol
Unit
SI-8501L
VIN
7 to 33
IO
0 to 1.0
V
A
Top
20 to +85
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
SI-8401L
min.
Output Voltage
VO
4.80
Conditions
Line Regulation
Load Regulation
Temperature Coefficient of Output Voltage
Switching Ripple
Voltage (C2=470F)
Overcurrent Protection
Starting Current
5.20
V
%
VIN=20V, IO=0.3A
60
Conditions
kHZ
VIN=20V, IO=0.3A
80
VOLINE
Conditions
100
mV
VOLOAD
Conditions
40
mV
VO/Ta
mV/C
0.5
20
Vr
Conditions
IS1
5.00
80
Conditions
Oscillation Frequency
max.
VIN=20V, IO=0.3A
Efficiency
Unit
typ.
40
mVp-p
VIN=20V, IO=0.3A
0.55
Conditions
VIN=10V
(Ta=25C)
Ratings
Parameter
Symbol
SI-8501L
min.
Output Voltage
4.80
Line Regulation
Load Regulation
Temperature Coefficient of Output Voltage
Switching Ripple
Voltage (C2=470F)
Overcurrent Protection
Starting Current
ICs
V
%
60
Conditions
kHZ
VIN=20V, IO=0.5A
70
VOLINE
Conditions
130
mV
VOLOAD
Conditions
VO/Ta
0.5
55
mV
mV/C
45
Vr
Conditions
Conditions
5.20
VIN=20V, IO=0.5A
IS1
5.00
83
Conditions
Oscillation Frequency
max.
VIN=20V, IO=0.5A
Efficiency
60
VO
Conditions
Unit
typ.
VIN=20V, IO=0.5A
mVp-p
1.1
VIN=18V
SI-8400L/8500L Series
(Unit : mm)
SI-8400L
SI-8500L
LIN
r
VIN
y
e LIN
26
0.1
120.5
VIN r
w GND
0.5
14.5
(2.17)
q w e
VOUT SS GND
0.1
26
Pin1 marking
(10.16)
(7.62)
(2.19)
18
0.8max.
SK
4.7
0.6
100.2
13.20.6
Pin 1 marking
3.7
Vo q
0.6
4
18
Block Diagram
SI-8400L
SI-8500L
3
LIN
L1
MIC1
VIN
Reg.
VO
VIN
Comp.
1
VO
Reg.
Latch
&
Drive
Reset
L1
MIC1
OCP
OSC
LIN
OCP
OSC
Reset
Comp.
TSD
Latch
&
Drive
TSD
Di1
Di1
Amp.
Amp.
VREF
VREF
GND
S.S.
GND
VIN
SI-8400L
GND
2
+
C1
220F
VOUT
LIN
3
N.C
VO
1
+
VIN
+
C1
470F
C2
470F
GND
GND
VIN SI-8500L
S.S
2
GND
3
C3
VOUT
LIN
4
VO
1
+
C2
470F
N.C
GND
GND
Ta-PD Characteristics
3.0
1.5
1.0
0.5
0
0
25
50
75
PD=VOIO
SI-8500L
SI-8400L
100
VO : Output voltage
IO : Output current
: Efficiency (%)
2.0
1.0
0
0
100
1
25
50
75
100
ICs
61
Lineup
Ch1
STA801M
Parameter
DC Input Voltage
Power Dissipation
Symbol
Ratings
VIN
43
Unit
V
PD1
PD2
Junction Temperature
Tj
+125
Storage Temperature
Tstg
40 to +125
Applications
For BS and CS antenna power supplies
For stabilization of the secondary stage of switching power supplies
Electronic equipment
Ratings
Symbol
min.
max.
Unit
VIN
Ch2 VOmax.+2
40
IO
0.5
Tjop
20
+125
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
STA801M
Symbol
min.
Output voltage 1
Ch1
Efficiency *
Temperature Coefficient of Output Voltage
Line Regulation
Load Regulation
Output voltage 2-1
Ch2
(Select one output)
Efficiency*
Temperature Coefficient of Output Voltage
Line Regulation
Load Regulation
Common
VO1
4.80
Conditions
V
%
0.5
30
Conditions
mV/C
90
mV
VOLOAD1
10
Conditions
40
mV
Conditions
9.00
9.36
V
VIN=20V, IO=0.3A
11.04
Conditions
11.50
11.96
V
VIN=20V, IO=0.3A
11.62
Conditions
VO2-4
5.20
80
VOLINE1
VO2-3
5.00
VIN=20V, IO=0.3A
VO/Ta1
VO2-2
max.
VIN=20V, IO=0.3A
Conditions
VO2-1
Unit
typ.
12.10
12.58
V
VIN=20V, IO=0.3A
14.88
Conditions
15.50
16.12
V
VIN=20V, IO=0.3A
89
Conditions
VIN=20V, IO=0.3A
VO/Ta
2.0
VOLINE
40
Conditions
mV/C
130
mV
VOLOAD
30
Conditions
120
mA
125
kHZ
IS1
0.51
0.7
* Efficiency indicates the value when only one channel is active. The value can be calculated as shown below. 7.5mA is deducted for the no-load circuit current of
output.
62
VOIO
VIN(IIN0.0075)
ICs
100(%)
mV
ICC
Icc at unused
2
STA801M
(Unit : mm)
90.2
3.150.5
(1)
40.2
1.20.1
2(R1)
2(R0
(3.1)
1.15 +0.2
0.1
.65)
R-END
0.55+0.2
0.1
9P2.540.5=22.861
Pin Assignment
q VO2 Cont
w VOS1
e SS1
r SWOUT1
t GND
y VIN
u SWOUT2
+0.2
0.55 0.1
4.30.7
(Measured at
the tip)
i SS2
o VOS22
!0 VOS21
Plastic Mold Package Type
Flammability: UL94V-0
Product Mass: Approx. 2.5g
1 2 3 4 5 6 7 8 9 10
Block Diagram
VIN 6
4 SWOUT1
P.Reg.
OCP
SS1 3
+
PWM
PWM
Logic
Drive
2 VOS1
+
Amp.
PWM
OSC
Vref
TSD
f/4
Reset
7 SWOUT2
OCP
PWM
Logic
SS2 8
10 VOS2 1
Drive
+
PWM
9 VOS2 2
VO2 Cont 1
+
Amp.
GND 5
Vref
VIN
+
SWOUT1
VIN
STA801M
Vo2
9v
10
STA801M
Vo2
11.5v
10
C2 +
Ch 1
C4
330F
VOS1
12.1V
Vo2Cont
15.5V
Vo2Cont
0.47 F
8
Open:ON
Low :OFF
VO1
5V:100 H
C1
220F
3 SS1
Open:ON
Low :OFF
Selection of connection method and output for VOS2-1 and VOS2-2 of Channel 2
L1
SWOUT2
SS2
C5
+ 0.47 F
VO2 Cont
1
GND
5
L2
VO2
150 H
Ch 2
GND
VOS2
2
VO2Cont Pin
C3
330F
10
Or
Open
Low
9V
11.5V
12.1V
15.5V
VOS2
1 9
Pin 9
Pin 10
Ta-PD Characteristics
7
5
4
3
2
Without Heatsink
1
0
30
25
50
75
100
125
ICs
63
Ratings
Input Voltage
Power Dissipation*2, *3
Symbol
Parameter
Unit
SPI-8001TW
SPI-8002TW
SPI-8003TW
VIN
21
40
40
VCC
21
40
40
VC/E
21
40
40
PD
3.0
Junction Temperature
Tj
+135
+150
Storage Temperature
Tstg
40 to +135
40 to +150
j-c
9.0
C/W
j-a
35.8
C/W
C
C
*1: Absolute maximum ratings show the destructive limit. No parameter should exceed the ratings in transient or normal
operations.
*2: When mounted on glass-epoxy board 70cm2 (copper laminate area 30.8cm2).
*3: Limited by thermal protection.
Applications
Onboard local power supplies
OA equipment
For stabilization of the secondary-side output voltage of switching power supplies
Symbol
SPI-8001TW
min.
SPI-8002TW
max.
min.
SPI-8003TW
max.
min.
Unit
max.
VIN
VO+3
20
VO+3
38
VO+3
38
VCC
4.5
20
4.5
38
4.5
38
38
24
VC/E
Output Voltage Range
VO
IO
20
1
16
38
1
1.5
24
1.5
1.5
Tjop
30
+135
30
+135
30
+125
Top
30
+135
30
+135
30
+85
*1: Recommended operating conditions show the operating conditions required for the normal circuit function described in the electrical characteristics.
These conditions must be followed in actual use.
64
ICs
SPI-8001TW/SPI-8002TW/SPI-8003TW
Electrical Characteristics*1
(Ta=25C)
Ratings
Parameter
Reference Voltage
Temperature Coefficient
of Reference Voltage
typ.
0.996
1.006
Conditions
VREF/T
Conditions
1.016
0.996
1.006
1.016
0.966
Conditions
VLOAD
10
40
250
285
30
60
200
30
40
Conditions
10
Conditions
IIN (off)
8.5
mA
VCC=14V, IO=0A
Conditions
Conditions
VC/EH
95
VSSL
95
Conditions
95
0.5
VIN=VCC=15V
80
VSSL=0V, VIN=VCC=15V
VC/E=20V
0.5
60
0.8
VIN=VCC=14V
VC/E=20V
Conditions
ISSL
0.8
VIN=VCC=15V
Conditions
VIN=VCC=14V
0.8
Conditions
IC/EH
VIN=VCC=15V
VC/EL
mA
Conditions
mA
8.5
IIN (ssov)
ICC (ssov)
Conditions
mA
ICC (off)
VCC=15V, IO=0A
Conditions
mV
VIN=VCC=14V
4
8.5
40
1.6
ICC
mV
1.6
4
kHz
60
VIN=VCC=15V
IIN
400
10
1.6
81
Conditions
mV/ C
Conditions
81
60
1.016
78
1.006
max.
0.1
78
250
Unit
typ.
VIN=14V, IO=0.1A
0.1
83
fosc
IS
min.
Conditions
Overcurrent Protection
Starting Current
max.
VLINE
Load Regulation
typ.
80
Eff2
Line Regulation
SPI-8003TW
min.
0.1
Conditions
Oscillation Frequency
SPI-8002TW
max.
Conditions
Efficiency 2*2
SS Pin*3
VREF
SPI-8001TW
min.
Eff1
Efficiency 1*2
C/E Pin
Symbol
0.5
VIN=VCC=14V
60
80
60
80
VSSL=0V, VIN=VCC=14V
*1: Electrical characteristics show the characteristic ratings guaranteed when operating the ICs under the measurement conditions described in the above table.
*2: Efficiency is calculated from the following formula.
ICs
65
(Unit : mm)
1.350.2
1+0.1/0.05
(Heatsink thickness)
10.50.2
16
0.90.3
10.50.3
2.0+0.2/0.08
0 to 0.1
0 to 8
8
2.50.2
2.75MAX
Enlarged View of A
A
0.25+0.15/0.05
0.10
12.20.2
(Gate remains: Not included in dimensions)
(11)
(4.5)
7.50.2
(2)
Pin Assignment
(SPI-8001TW, SPI-8002TW)
q AGND
o AGND
!0 VREF2
w VIN1
e VCC
!1 SS2
r SWout1
!2 DGND2
t DGND1
!3 SWout2
y SS1
!4 C/E
!5 VIN2
u VREF1
i N.C
!6 N.C
16
1.270.25
Pin Assignment
(SPI-8003TW)
q AGND
w VIN1
e VCC
r SWout1
t DGND1
y SS1
u VREF1
i COSC
o
!0
!1
!2
!3
!4
!5
!6
AGND
ROSC
VREF2
SS2
DGND2
SWout2
C/E
VIN2
0.4+0.15/0.05
Block Diagram
VIN
VIN
3
VCC
VC/E
C1
SPI-8001TW/SPI-8002TW
3
VCC
C6
3V
14
Start
C/E
VREF
PReg
OSC
fdown
TSD
15
VC/E
UVLO
3V
C/E
Start
VREF
10
VIN1
C4
SS1
VREF1
PWM
Logic
Buffer-Amp
f down
cut
Amp
TSD
UVLO
VIN2
L1
4
5
VO1
C2
C7
SS1
VREF1
3V
Buffer-Amp
C5
15
f down
cut
R1
SWOUT1
DGND1
Drive
Amp
VIN1
OCP
PWM
Logic
R5
Di1
OCP
3V
f down
cut
C9
DGND1
AGND
Cosc
R7
SWOUT1
PWM
Rosc
Drive
OCP
3V
fdown
C4
1V
1V
R5
OSC
RESET
PReg
RESET
f down
cut
C1
SPI-8003TW
PWM
VIN2
AGND
L1
11
10
SS2
VREF2
PWM
Logic
+
C5
Buffer-Amp
AGND
Amp
SWOUT2
13
PWM
L2
VO2
DGND2
C3
12
R3
R4
66
ICs
R6
11
SS2
VREF2
Di2
AGND
1, 9
R2
12
Drive
C7
R1
R2
R6
C2
16
OCP
3V
VO1
+
Di1
PWM
Logic
+
C8
C6
Buffer-Amp
AGND
Amp
Drive
SWOUT2
14
PWM
L2
VO2
+
Di2
DGND2
C3
13
AGND
1, 9
R3
R4
C8
SPI-8001TW/SPI-8002TW/SPI-8003TW
VIN
VCC
2
SWout1
VCC
L1
2
V01
Ch1
SS1
Di1
R1
6
+
C2
IREF1
DGND1
C4
15
C1
R2
C4
V02
R6
12
SS2
Ch2
VREF2
10
Di2
12
R6
C8
R4
AGND
C5
C2
C7
R2
SWout2
VIN2
14
VC2
L2
R3
C3
DGND2
R1
SPI-8003TW
16
C1
IREF2
Di1
IREF1
L2
11
L1
VC1
Ch1
DGND1
C5
13
SWout1
SS1
SWout2
VIN2
C/E
VIN1
VREF1
R5
C7
SPI-8000TW
C6
C/E
VIN1
15
VREF1
R5
VC/F
VIN
14
C6
1, 9
13
SS2
VREF2
11
R3
+
C3
IREF2
DGND2
AGND
1, 9
GND
Ch2
Di2
CORC
8
C8
R4
RCSC
10
GND
C9
C1
C2, C3
C4, C5
C6, C7, C8
: 220 F/50V
: 470 F/25V
: 1 F
: 0.1 F
R5, R6
L1, L2
Di1, Di2
(Sanken)
: 1k
: 47 H
: SJPB-H6
R7
GND
GND
C1
C2, C3
C4
C5, C6
C7, C8
: 220 F/50V
: 470 F/25V
: 1 F/50V
: 1 F/10V
: 0.1 F/50V
C9
L1, L2
R2, R4
R5, R6
Di1, Di2
: 100pF/10V
: 47 H
: 1k
: 1k
: SJPB-H6 (Sanken)
R1=
(VO1VREF1)
(VO1V)
VREF1
1
.=
=
(), R2=
=
1(K)
1103
IREF1 1103 .
IREF1
To create the optimum operating conditions, place the components as close as possible to each other.
Ta-PD Characteristics
3.5
j-a (Copper Laminate Area)
35.8C/W (30.8 cm2)
3.0
PD = VOIO
2.5
100
VO
1 VFIO 1
VIN
2.0
VO :
VIN :
IO :
:
VF :
1.5
1.0
0.5
0.0
25
25
50
75
100
Output Voltage
Input Voltage
Output Current
Efficiency (%)
D1 Forward Voltage
SJPB-H60.45V (IO=1A)
Note 1: The efficiency depends on the input voltage and the output current. Therefore, obtain the value from the efficiency graph and substitute the percentage in the formula above.
Note 2: Thermal design for D1 must be considered separately.
ICs
67
Parameter
(Ta=25C)
Symbol
Ratings
Unit
VCC
DC Input Voltage
VIN
25
VH
30
VEN
VCC
VPWRGD
Junction Temperature
Tj
+150
Storage Temperature
Tstg
40 to +150
Applications
Power supplies for notebook PCs and mobile devices
Onboard local power supplies
OA equipment
For stabilization of the secondary-side output voltage of switching power supplies
Ratings
Unit
Parameter
VCC
4.5 to 5.5
VIN
3 to 18
VO
1.1 to 6
Top
20 to +85
Electrical Characteristics
Parameter
Symbol
Dynamic
Output Voltage
Characteristics Temperature Coefficient of Output Voltage
VO
Circuit
Current
min.
typ.
max.
1.2%
1.1
+1.2%
VO/T
Unit
V
mV/C
0.03
Conditions
VIN=5V, VCC=5V, VSNS connected to VO, IO=0A
VIN=5V, VCC=5V, VSNS connected to VO, IO=0A, Ta=0 to 85C
Iop
mA
Iop
mA
VIN=5V, EN=H
Istd1
100
VCC=5V, EN=L
Istd2
50
VIN=5V, EN=L
Ratings
Vuvlo1
3.7
4.45
VIN=5V
Vuvlo2
2.5
2.9
VCC=5V
On Time
Ton
1.27
Toff
0.7
VCC=5V
Vref
1.3
VCC=5V
Iref
100
VCC=5V
1.1
1.2
High Side
Drive
RonHH
5.5
VH-VLIN=5V
RonHL
5.5
VH-VLIN=5V
Low Side
Drive
RonLH
5.5
VCC=5V
RonLL
5.5
VCC=5V
Bootstrap
Bootstrap Voltage
Protection
System
68
VH-VLIN
4.5
Ilim
90
Iss
5.5
100
110
VCC=5V, VIN=5V
VCC=5V
20
Vcelo
0.8
VCC=5V
Vcehi
2.4
VCC
VCC=5V
ICE
VCC=5V, EN=5V
Vsens
1.32
VCC=5V
Vsens
0.88
VCC=5V
Vpwrgd
0.4
VCC=5V, Ipwrgd=120A
Ipwrgd
120
VCC=5V, Vpwrgd=0.4V
Ipwrgd
Vpwrgd=5V
ICs
SI-8511NVS
(Unit : mm)
2.0 Mirror surface
Depth 0.02 to 0.08
11
11
13
24
1.0 Mirror surface
(6.4)
12
11
11
1.90
3.00
7.60.2
5.600.1
+0.1
0.15 0.05
0.65
0.375 TYP
0.22+0.1
0.05
0.12 M
7.800.1
0.4
7.90.2
1.150.05
11
11
0.100.05
11
0 to 10
S
0.08 S
0.500.2
+5V
VCC1
ILIM
VIN ISEN
VCC2
OCP
PRE_REG
EN
H : ON
L : OFF
EN
UVLO
Vpreg
VH
Level
Shift
Gate Driver
OFF Clamp
Latch
Buff
DRVH
VO
Synchronous
Cont.
(Logic)
POWER_GOOD
H : GOOD
L : NG
PWRGD
LIN
+
Buff
Logic
Power
Good
DRVL
PGND
Switching
Constant On
Time Cont.
+
COMP
VO
VSNS
OSC
SS
GND
OVP_SL
FADJ
Open : Change Frequency
Short : 400KHz Operation
FSET
14
SS
12
SKIP
Open : Skip Mode
L
: No Skip Mode
C7 : 0.1 F
R1
5m
R5
10
NC
NC
DRVH
LIN
Q1
24
L1 : 10 H
2
3
4
C6
0.1 ~ 1 F
C9
1000
pF
5
6
7
8
VCC
R7
47k
R10
2.2k
R9
9
10
VH
DRVL
VIN
PGND
ISEN
VCC2
ILIN
OVP_SL
SI-8511NVS
GND
VSNS
VO
PWRGD
VCC1
SS
EN
SKIP
23
22
21
20
VO
+
Q2
D1
SJPJ-L3
R6
10
C5 : 4.7 F
19
R12
18
C4 : 3.3 F
VCC
17 C8 : 220pF
16
15
EN
SKIP
PWRGD
11
12
REF
NC
FADJ
NC
14
13
R11 : 100k
R8 : 200k
R13
R4
47k
C3
0.1 F
C2 :
330 F
ICs
69
Selection
Guide
Linear Regulator ICs (low dropout voltage, built-in overcurrent protection and thermal shutdown circuits)
<Single Output>
Surface-Mount Type
Output Voltage
(V)
Output Current
Series Name
(A)
SI-3000LU
0.25
NR301E
1.0
SI-3000LSA
1.0
SI-3000KS
1.0
SI-3000KD
1.0
SI-3000LLSL
1.5
SI-3000ZD
3.0
1.8
2.5
3.3
1.0
1.1
1.25
1.28
Can Use
Low ESR
Dropout
Voltage
Maximum Input
Voltage
(V)
(V)
0.5
18
SOT89-5
Yes
72
0.6
30
eSOIC8
Yes
74
1.2
16
SOP8
No
76
0.6
17
SOP8
Yes
78
0.6
35*1
TO263-5
Yes*2
80
0.3
10
SOP8
Yes
84
0.6
10
TO263-5
No
86
Package
Page
Capacitor
Thru-Hole Type
Output Current
Series Name
(A)
1.0
SI-3000KF
1.0
SI-3000ZF
3.0
70
ICs
1.1
Dropout
Voltage
Maximum Input
Voltage
(V)
(V)
Package
Can Use
Low ESR
Page
Capacitor
0.5
35
TO220F-5
No
88
0.7
10
TO220F-5
No
90
Application Note
Heat dissipation and Reliability
Mounting Torque
SI-3000KF
SI-3000ZF
VIN (max.)
VIN (mean)
VIN (min.)
Input Ripple
When setting the DC input voltage, please follow the instructions below:
Make VIN(min) [ (Output voltage) + (Minimum dropout voltage) ]
Make VIN(max) DC input voltage shown in the "Absolute Maximum Ratings"
Thermal Design
The maximum junction temperature Tj(max) given in the absolute maximum ratings is specific to each product type and must be strictly observed. Thus, thermal design must consider the maximum power dissipation PD(max), which varies by the conditions of use, and the maximum ambient temperature Ta(max).
To simplify thermal design, Ta-PD characteristic graphs are provided herein.
Please observe the following steps for heatsink design:
1. Obtain the maximum ambient temperature Ta(max).
2. Obtain the maximum power dissipation PD(max).
3. Look for the intersection point on the Ta-PD characteristic graph and determine the size of the heatsink.
Although the heatsink size is now obtained, in actual applications, 10-to-20%
derating factor is generally introduced. Moreover, the heat dissipation capacity
of a heatsink highly depends on how it is mounted. Thus, it is recommended to
measure the heatsink and case temperature in the actual operating environment.
Please refer to the Ta-PD characteristic graphs for respective product types.
Others
Devices can not be operated in parallel connection aiming for a larger current.
Diodes for isolation purpose are provided in between input and ground, and
also in between output and ground. They may be broken down if the device
is reverse biased. In this case, please clamp the device with low VF diodes to
protect them.
Diodes
ICs
71
Parameter
(Ta=25C)
Symbol
Ratings
Unit
V
DC Input Voltage
VIN
18
VC
VIN
DC Output Current
IO
250
mA
Power Dissipation
PD*1
0.75
Junction Temperature
Tj*2
40 to +135
Storage Temperature
Tstg*2
40 to +125
j-a*1
146
C/W
Applications
Auxiliary power supplies for PC
Battery-driven electronic equipment
Symbol
min.
Unit
max.
Input Voltage
VIN
*2, *3
VO+2*1
DC Output Current
IO
250
mA
Top
20
85
*1: VIN (max) and IO (max) are restricted by the relation PD = (VIN - VO) IO.
Calculate these values referring to the reference data on next page.
*2: Refer to the Dropout Voltage parameter.
*3: For the SI-3012LU, set the input voltage to Vin 2.4 V, and secure the minimum voltage as explained in "Setting DC Input Voltage" section in Linear Regulator Application Note.
Electrical Characteristics
Parameter
Symbol
SI-3012LU(Variable)
min.
VADJ
Reference Voltage
1.210
Conditions
max.
1.250
1.290
VIN=VO+1V, IO =10mA
VDIF
Dropout Voltage
Conditions
IO=100mA(VO =3.3V)
Conditions
IO=250mA(VO =3.3V)
0.5
VLINE
VLOAD
VO/Ta
0.3
Tj=0 to 100C
Conditions
RREJ
Iq
150
VIN=VO+1V, IO =0mA
VC=2V, R2=100k
Conditions
Iq(OFF)
Conditions
VIN=VO+1V, VC=0V
260
Conditions
VC, IH
VC, IL
0.8
IC, IH
40
Conditions
IC, IL
Conditions
2.0
VC=2V
0
VC=0V
A
mA
VIN=VO +1V
ON)*2
Terminal
dB
VIN=VO +1V ,
f=100 to 120HZ( VO=3.3V)
Conditions
IS1
mV/ C
55
Ripple Rejection
Overcurrent Protection
Starting Current*1
mV
VIN=VO +1V,
IO=1 to 250mA( V O=3.3V)
Conditions
mV
20
Load Regulation
Quiescent Circuit
Current
10
VIN=VO+1 to VO+5V,
IO=10mA( VO=3.3V)
Conditions
Temperature Coefficient of
Reference Voltage
0.3
Line Regulation
VC
Unit
typ.
A
A
*1: Is1 is specified at the 5% drop point of output voltage VO on the condition that VIN = 3.3 V, and IO = 10 mA.
*2: Output is OFF when the output control terminal (VC terminal) is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
72
ICs
SI-3000LU Series
(Unit : mm)
4.50.05
1.60.05
4.20.05
r
4.20.05
4.30.05
2.50.05
4.70.05
q
1.50.05
1.50.05
0.40.05
1.50.05
4.20.05
Pin Assignment
q ADJ
w GND
e VC
r VIN
t VO
0.10.05
5
0.0 )
.0
( 1
0.40.03
0.900.1
4.20.05
0.900.1
0.40
4.20.05
t
Block Diagram
SI-3012LU
VIN 4
5 VO
VC 3
1 ADJ
TSD
+
2 GND
REF
CIN
R1
3
1
2
VIN
VO
ADJ
R2
GND
Load
VIN
VC
Reference Data
Copper Laminate Area vs Power Dissipation
Tj=100C PCB size 4040
1
Ta=25C
0.9
Ta=40C
0.8
Ta=60C
Ta=85C
0.7
0.6
Case temperature Tc
measurement point
0.5
0.4
0.3
A monolithic ICs mounts an inner frame stage that is connected to the GND
pin (pin 2). Therefore, enlarging the copper laminate area connected to the
GND pin improves heat radiation effect.
Obtaining the junction temperature
Measure the temperature TC at the lead part of the GND pin (pin 2) with a
thermocouple, etc. Then, substitute this value in the following formula to
obtain the junction temperature.
T j =PD jc+Tc ( jc=5 C/W)
0.2
0.1
0
10
100
1000
ICs
73
Applications
Parameter
DC Input Voltage
Output control terminal voltage
ADJ terminal voltage
Power Dissipation
Junction to Ambient Air Thermal Resistance
Thermal Resistance (Junction to Lead (pin 4))
Junction Temperature
Storage Temperature
(Ta=25C)
Symbol
VIN
VC
VADJ
PD
j-a
j-L
Tj
Tstg
Ratings
30
VIN
5
1.4*
71
26
30 to +125
30 to +125
Unit
V
V
V
W
C/W
C/W
C
C
Symbol
Parameter
min.
2.7
0
1.1
30
20
VIN
IO
Input Voltage
DC Output Current
Output Voltage Variable Range
Operating Ambient Temperature
Operating Junction Temperature
Vo(ADJ
Top(a)
Top(j)
Unit
max.
27*
1*
16
85
100
V
A
V
C
C
*: VIN (max) and IO (max) are restricted by the relation PD = (VIN VO) IO.
Electrical Characteristics
*1: VIN (max) and IO (max) are restricted by the relation PD = (VIN VO) IO.Ratings
Please calculate
to the reference data on page 71.
Symbol
NR301E
Parameterthese values referring
*2: Refer to the Dropout Voltage parameter.
min.
typ.
Reference Voltage
Line Regulation
Load Regulation
Dropout Voltage
Quiescent Circuit Current
Circuit Current at Output OFF
Temperature Coefficient of Reference Voltage
Ripple Rejection
Output Control Output ON
Pin Voltage
Output OFF
Output Control Output ON
Pin Current
Output OFF
Overcurrent Protection Starting Current*
VADJ
VLINE
VLOAD
VDIF
Iq
Iq(off)
VADJ/Ta
RREJ
VC(H)
VC(L)
IC(H)
IC(L)
IS1
0.985
0.5
2
1.1
1
25
30
0.3
0.6
0.9
0
0.1
55
4
0
Unit
max.
1.015
50
60
0.4
0.8
1.6
1
0.6
40
0.1
*: Is1 is specified at the 5% drop point of output voltage VO on the condition that VIN = 3.3 V, and IO = 10 mA.
74
ICs
V
mV
mV
V
V
mA
A
mV/C
dB
V
V
A
A
A
Conditions
IO=0.5A
IO=1.0A
NR301E
(Unit : mm)
External Dimensions
A2
Symbol
A1
0.10
A1
A2
D
D1
E
E1
E2
D1
E1
E2
MIN
0
1.398
0.33
4.8
3.053
5.893
3.73
2.033
0.508
Package A
TYP
1.448
4.902
3.18
2.16
1.27
MAX
0.1524
1.498
0.508
5.004
3.307
6.918
3.89
2.287
0.762
MIN
0
1.25
0.38
4.8
3.1
5.8
3.8
2.2
0.45
Package B
TYP
0.1
1.4
4.9
3.3
6
3.9
2.4
1.27
0.6
MAX
0.15
1.65
0.51
5
3.5
6.2
4
2.6
0.8
Delivered in Package A or B.
e
Pin Assignment
q VOUT
w ADJ
e GND
r NC
t VC
y NC
u NC
i VIN
Plastic Mold Package Type
Flammability: UL94V-0
Product Mass: Approx. 0.1g
Block Diagram
1 Vout
Vin 8
OCP
Drv
BGRef
2 ADJ
Vc 5
OTA
Vadj
Vc
2V/0.6V
155C +
6 NC
1.1Vadj
Hys50C
GND 3
4 NC
OVP
TSD
7 NC
NR301E Block Diagram
D1
Vo 1
NR301E
5 Vc
C1
R1
ADJ 2
G
3
C2
R2
Load
8 IN
VO =
R+R2
VO VADJ
VADJ , therefore R =
R
VADJ
R2
ICs
75
SI-3000LSA Series
Features
Parameter
Output current: 1 A
Low circuit current at output OFF:
Iq(OFF) 1 A (VC = 0 V)
Unit
VIN
16
VC
VIN
DC Output Current
IO
PD1*1
1.16
PD2*2
1.1
Tj*3
30 to +150
Top
30 to +150
Storage Temperature
Tstg
30 to +150
j-L
36
C/W
j-a *2
100
C/W
Junction Temperature
Ratings
DC Input Voltage
Power Dissipation
(Ta=25C)
Symbol
*1: When mounted on glass-epoxy board 56.5 56.5 mm (copper laminate area 100%).
*2: When mounted on glass-epoxy board 40 40 mm (copper laminate area 100%).
*3: Thermal protection circuits may be activated if the junction temperature exceeds 135C.
Applications
Auxiliary power supplies for PC
Battery-driven electronic equipment
Symbol
SI-3018LSA
SI-3025LSA
3.1 to 3.5*1
*2
SI-3033LSA
to 3.5*1
*2
Unit
SI-3050LSA
to 5.2*1
*2
VIN
to 8.0
IO
0 to 1
V
A
Tjop
20 to +125
Taop
30 to +85
*1: VIN (max) and IO (max) are restricted by the relation PD = (VIN VO) IO.
Please calculate these values referring to the reference data on next page.
*2: Refer to the Dropout Voltage parameter.
Electrical Characteristics
Parameter
Symbol
VO
Output Voltage
Conditions
SI-3018LSA
SI-3033LSA
typ.
max.
min.
typ.
max.
min.
1.764
1.800
1.836
2.450
2.500
2.550
3.234
VIN=3.3V, IO=0.5A
VDIF
VIN=3.3V, IO=0.5A
Conditions
Dropout Voltage
SI-3025LSA
min.
Conditions
Temperature Coefficient of
Output Voltage
Conditions
IO0.5A
0.8
Overcurrent Protection
Starting Current*1,3
IS1
VC, IH
10
10
Conditions
10
15
10
20
20
20
VIN=3.3V, IO=0 to 1A
VIN=5V, IO=0 to 1A
VIN=6V, IO=0 to 1A
0.3
0.3
0.3
0.5
60
57
55
55
1.7
1.7
1.7
1.7
2.5
VIN=3.3V, IO=0A
2.5
VIN=3.3V, IO=0A
1
VIN=5V, IO=0A
1
1.2
1.2
VIN=3.3V
VIN=5V
2.0
2.0
80
40
80
0.8
0.8
40
80
40
80
VC=2V
VC=0V
*1: Is1 is specified at the 5% drop point of output voltage VO on the condition that VIN = 3.3 V (5 V for SI-3033LSA), and IO = 0.5 A.
*2: Output is OFF when the output control terminal VC is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
*3: These products cannot be used in the following applications. Because these applications require a certain current at start-up and so the built-in foldback-type overcurrent
protection may cause errors during start-up stage.
(1) Constant current load (2) Positive and negative power supply (3) Series-connected power supply (4) VO adjustment by raising ground voltage
76
ICs
dB
mA
A
A
VIN=6V
2.0
0.8
40
mV/ C
VIN=6V, IO=0A
1.2
0.8
mV
2.5
VIN=3.3V
2.0
2.5
mV
30
VIN=3.3V, IO=0 to 1A
Conditions
IC, IL
3
10
VC, IL
IC, IH
0.8
10
Conditions
ON)*2
IO0.5A
0.8
10
Iq(OFF)
Conditions
0.4
Conditions
5.10
0.4
IO0.5A
1.2
5.00
VIN=6V, IO=0.5A
Iq
4.90
RREJ
Ripple Rejection
VO/Ta
Conditions
3.366
max.
VOLOAD
Load Regulation
3.300
Unit
typ.
IO1A
VLINE
Conditions
min.
VIN=5V, IO=0.5A
Conditions
Line Regulation
max.
0.4
0.6
SI-3050LSA
typ.
A
A
SI-3000LSA Series
(Unit : mm)
5.10.4
1.27
0.15+0.1
0.05
6.20.3
4.40.2
Pin Assignment
q VIN
w NC (Leave open)
e VIN
r VC
t GND
y GND
u VO
i VO
0.50.1
0.40.1
10
1.27
1.50.1
0.050.05
0.10
0.40.1
1.550.15
to
0.995max.
0.12 M
Block Diagram
VIN 1
NC 2
7 VO
VO
VIN 3
TSD
VC 4
GND
GND
CIN
VO
VIN
GND
Load
VIN
CO
VC
Reference Data
PCB Copper Laminate Area vs. Junction to
Ambient Air Thermal Resistance
150
140
1.2
130
120
j-a (C/W)
0.8
110
100
j-a=100C/W
0.6
0.4
Ta=25C
0.2
Ta=85C
90
80
70
100
0
1000
5000
ICs
77
Parameter
Unit
VIN*1
17
VC
VIN
DC Output Current
IO*1
1.0
Power Dissipation
PD*1, *2
0.76
Junction Temperature
Tj
40 to +125
Storage Temperature
Tstg
40 to +125
j-a
j-L
130
C/W
22
C/W
Ratings
DC Input Voltage
(Ta=25C)
Symbol
*1: VIN (max) and IO (max) are restricted by the relation PD = (VIN - VO) IO. Please calculate these values referring to the
Copper laminate area vs. Power dissipation data as shown hereinafter.
*2: When mounted on a glass epoxy board of 1600 mm2 (copper laminate area 2%).
Applications
Local power supplies
Battery-driven electronic equipment
Electrical Characteristics
Parameter
Symbol
Input Voltage
Output Voltage
(Reference voltage VADJ for SI-3012KS)
VIN
2.4
VO (VADJ)
1.24
Conditions
max.
min.
1.28
1.32
2.45
Load Regulation
Quiescent Circuit Current
Circuit Current at Output OFF
Temperature Coefficient of
Output Voltage
Ripple Rejection
Overcurrent Protection
Starting Current*2
VC
Terminal
min.
2.50
2.55
3.234
VIN=3.3V, IO=10mA
0.3
Conditions
Conditions
Conditions
10
VIN=5V, IO=0 to 1A
350
VIN=3.3V, VC=0V
VIN=5V, VC=0V
0.3
0.3
Tj=0 to 100C
Tj =0 to 100C
55
55
55
RREJ
IS1
50
350
VIN=3.3V, VC=0V
Conditions
Conditions
15
VIN=5 to 10V, IO=10mA
VIN=3.3V, IO=0 to 1A
VO/Ta
0.6
40
350
1.2
Conditions
0.3
1.2
VC, IL
0.8
0.8
0.8
IC, IH
40
40
40
IC, IL
Conditions
2.0
VC=2V
Conditions
5
VC=0V
78
ICs
mV
A
A
VIN=5V
VC, IH
2.0
mV
dB
2.0
mV/ C
1.2
VIN=3.3V
VIN=3.3V (VO=2.5V)
IO=1A
10
Conditions
IO=0.5A
40
Iq (OFF)
3.366
0.4
IO=1A
Iq
3.300
0.6
IO=1A (VO=2.5V)
VOLOAD
max.
VIN=5V, IO=10mA
IO=0.5A
0.6
VOLINE
typ.
0.4
IO=0.5A (VO=2.5V)
Conditions
Line Regulation
max.
*1
VIN=3.3V, IO=10mA
Conditions
Unit
SI-3033KS
typ.
*1
VDIF
Dropout Voltage
SI-3025KS
typ.
A
A
SI-3000KS Series
(Unit : mm)
0.4
5.1
1.27
0.50.1
6.20.3
4.40.2
Pin Assignment
q VC
w VIN
e VO
r Sence (ADJ for SI-3012KS)
t GND
y GND
u GND
i GND
0.15+0.1
0.05
0.40.1
10
1.27
0.10
0.40.1
0.12 M
1.550.15
0.050.05
1.50.1
to
0.995max.
Block Diagram
SI-3012KS
SI-3025KS, SI-3033KS
VIN 2
3 VO
VIN 2
VC 1
4 ADJ
VC 1
3 VO
4
Sense
TSD
TSD
REF
REF
5 GND
5 GND
SI-3025KS, SI-3033KS
VIN
2
VO
3
R1
VC GND ADJ
1
4
5 to 8
CIN
VIN
2
CO
Load
CIN
VO
3
sense
VC GND 4
1
5 to 8
CO
Load
R2
R2
R1=(VOVADJ)(VADJ/R2)
Reference Data
Copper Laminate Area vs.
Thermal Resistance
140
120
Power dissipation PD (W)
Ta=25C
100
80
Ta=50C
Ta=80C
0.8
Tj=PD jL + TL
0.6
( jL = 22C/W)
0.4
60
0.2
40
10
100
Copper laminate area (mm2)
(GND terminal)
1000
0
10
100
Copper laminate area (mm2)
(GND terminal)
1000
ICs
79
SI-3000KD Series
Features
Parameter
(Ta=25C)
Ratings
Symbol
SI-3012KD/3033KD
SI-3010KD/3050KD
35*1
DC Input Voltage
VIN
VC
VIN
DC Output Current
IO
1.0
Power Dissipation
PD*2
Junction Temperature
Tj
30 to +125
Storage Temperature
Tstg
30 to +125
j-a
33.3
C/W
j-c
C/W
17
Unit
V
V
*1: A built-in input-overvoltage-protection circuit shuts down the output voltage at the Input Overvoltage Shutdown Voltage
of the electrical characteristics.
*2: When mounted on glass-epoxy board of 1600mm2 (copper laminate area 100%).
Applications
Secondary stabilized power supply (local power supply)
Electrical Characteristics 1 (Low Input Voltage type compatible with low ESR output capacitor)
Ratings
Parameter
Symbol
Input Voltage
Output Voltage
(Reference Voltage for SI-3012KD)
VIN
2.4*3
VO (VADJ)
1.24
Conditions
max.
*4
*3
1.28
1.32
3.234
*4
Conditions
IO=0.5A
0.6
Temperature Coefficient of
Output Voltage
RREJ
IS1
VIN=3.3V, VC=0V
Conditions
Conditions
VIN=5V, IO=0A,VC=2V
1
Conditions
VO/Ta
Ripple Rejection
350
Iq (OFF)
VIN=5V, VC=0V
0.3
0.3
Tj=0 to 100C
55
55
Conditions
1.1
VIN=3.3V
VC, IL
0.8
0.8
IC, IH
40
40
IC, IL
Conditions
VC=2V
5
0
VC=0V
VC=2V
5
0
VC=0V
A
A
VIN=5V
VC, IH
Conditions
mV
dB
mV
mV/C
ON)*2
IO=1A
350
Conditions
0.6
IO=1A (VO=2.5V)
Iq
0.4
IO=0.5A (VO=2.5V)
Conditions
Terminal
3.366
15
VDIF
VC
3.300
40
Conditions
Dropout Voltage
max.
VIN=5V, IO=10mA
VOLOAD
Unit
typ.
15
Conditions
Load Regulation
min.
VIN=3.3V, IO=10mA
VOLINE
Line Regulation
SI-3033KD
typ.
A
A
*1: IS1 is specified at the 5% drop point of output voltage VO under the condition of Output Voltage parameter.
*2: Output is OFF when the output control terminal (VC terminal) is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
*3: Refer to the Dropout Voltage parameter.
*4: VIN (max) and IO (max) are restricted by the relation PD = (VIN - VO) IO. Please calculate these values referring to the Copper laminate area vs. Power dissipation data.
80
ICs
SI-3000KD Series
Parameter
Symbol
VIN
2.4*1
VO (VADJ)
0.98
Input Voltage
Output Voltage
(Reference Voltage VADJ for SI-3010KD)
Conditions
SI-3050KD
typ.
max.
27*5
*1
1.00
1.02
4.90
VIN=7V, IO=10mA
IO=1A
600
1
0.5
0.5
Tj=0 to 100C
75
75
VIN=7V,
f=100 to 120Hz, IO=0.1A (VO=5V)
VIN=7V,
f=100 to 120Hz, IO=0.1A
RREJ
Conditions
IS1
1.1
ON)*3
VC, IH
VC, IL
VIN=7V
2.0
VC=2V
VC=0V
VOVP
40
VC=2V
Conditions
0.8
40
Conditions
dB
2.0
0.8
IC, IL
mV/ C
VIN=7V
IC, IH
1.1
Conditions
*4
1
VIN=7V, VC=0V
Conditions
VIN=7V, IO=0A,
VC=2V
VIN=7V, VC=0V
VO/Ta
Ripple Rejection
600
Iq (OFF)
Temperature Coefficient of
Output Voltage
0.6
IO=1A (VO=5V)
Conditions
mV
IO=0.5A
Iq
mV
0.3
IO=0.5A (VO=5V)
Conditions
VIN=7V, IO=0 to 1A
0.6
75
0.3
Conditions
Conditions
Terminal
15*5
75
VDIF
VC
5.10
30
VIN=7V,
IO=0 to 1A (VO=5V)
Conditions
Dropout Voltage
5.00
VOLOAD
Load Regulation
max.
30
VIN=6 to 11V,
IO=10mA (VO=5V)
Conditions
Unit
typ.
VIN=7V, IO=10mA
VOLINE
Line Regulation
min.
VC=0V
33
26
Conditions
IO=10mA
IO=10mA
*1:
*2:
*3:
*4:
(Unit : mm)
10.0
4.5
0.1
0.10
(3)
0.2
2.54
(R0.3)
0 to 6
(0.5)
0.1
0.1
(1.7
0.25
0.8
0.25
(1.7
)
)
1
4
9.9
Pin Assignment
q VC
w VIN
e GND (Common to the rear side of product)
r VO
t Sense
(ADJ for SI-3010KD/3012KD)
4.9
0.3
0.2
2.4
(R0.3)
2.0
(0.75)
0.10
0.2
(6.8)
0.15
(3)
15.30
15.3
0.3
0.3
9.2
0.2
4.9
0.88
9.2
(4.6)
(2R0.45)
(3)
0.2
1.5 Dp:
+0.10
1.3 0.05
3-R0.3
0.2
(4.4)
0.2
(1.75)
1.2
(15)
0.2
(8.0)
0.2
(0.40)
Case temperature
measurement point
(1.7
0.25
0.8
0.25
(1.7
)
0.2
(3)
(3)
2-R0.3
10.0
0.02
ICs
81
Block Diagram
SI-3010KD/SI-3012KD
SI-3033KD/SI-3050KD
VIN 2
4 VO
VIN 2
VC 1
5 ADJ
VC 1
4 Vo
5
Sense
TSD
TSD
REF
REF
3 GND
3 GND
SI-3010KD/SI-3012KD
D1*2
D1*2
*1
*1
*3
R3
VIN
2
VO
4
VIN
2
+
sense
VC GND 5
1
3
CIN
R1
+
Load
CO
VO
4
CIN
VC GND ADJ
1
5
3
CO
Load
R2
R1=(VOVADJ)(VADJ/R2)
*3: For SI-3010KD, insert R3 in case of setting VO to VO 1.5V.
The recommended value for R3 is 10k.
Reference Data
Copper Laminate Area (on Glass-Epoxy Board) vs.
Thermal Resistance (from Junction to Ambient Temperature) (Typical Value)
55
400
600
800
1000
1200
82
A higher heat radiation effect can be achieved by enlarging the copper laminate
area connected to the inner frame to which a monolithic ICs is mounted.
Obtaining the junction temperature
Measure the case temperature TC with a thermocouple, etc. Then, substitute
this value in the following formula to obtain the junction temperature.
50
ICs
1400
1600
1800
ICs
83
Parameter
(Ta=25C)
Symbol
Ratings
Unit
DC Input Voltage
VIN
10
DC Bias Voltage
VB
10
VC
VIN
DC Output Current
IO
1.5
Power Dissipation
PD*1
1.1
V
V
V
A
W
Junction Temperature
Tj
30 to +125
Top
30 to +100
Storage Temperature
Tstg
30 to +125
(j-L)
36
C/W
(j-a)*1
100
C/W
*1: When mounted on glass-epoxy board of 40 40mm (copper laminate area 100%).
Applications
On-board local power supply
For stabilization of the secondary-side output voltage of switching power supplies
Symbol
VIN
VB
IO
Top
Input Voltage
Bias Voltage
Output Current
Operating Ambient Temperature
Unit
SI-3010LLSL
1.4 to 3.6*1
3.3 to 5.5
0 to 1.5*1
20 to +85*1
V
V
A
C
*1: VIN (max) and IO (max) are restricted by the relation PD = (VIN - VO) IO.
Electrical Characteristics
Parameter
Symbol
SI-3010LLSL
min.
VADJ
Reference Voltage
1.000
1.020
IO=10mA
10
Conditions
VOLOAD
Load Regulation
Conditions
VDIF
Dropout Voltage
0.3
Conditions
IO=1.0A
Iq
500
Conditions
Iq (OFF)
Conditions
VC=0V
0.2
Conditions
IS1
800
IO=0A, R2=10k
VO/Ta
1.6
Conditions
VC, IH
VC, IL
0.8
IC, IH
50
Conditions
mV
V
A
A
VC=2.7V
IC, IL
Conditions
mV
VIN=1.8V, VB=3.3V
mV/ C
Tj=0 to 100C
ON)*2
Terminal
max.
VOLINE
Line Regulation
VC
0.980
Conditions
Unit
typ.
10
VC=0.4V
A
A
*1: IS1 is specified at the 5% drop point of output voltage VO on the condition that VIN = overcurrent protection starting current, IO = 10 mA.
*2: Output is OFF when the output control terminal (VC terminal) is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
84
ICs
SI-3000LLSL Series
(Unit : mm)
Pin Assignment
q VO
w ADJ
e VB
r VC
t GND
y GND
u VIN
i VIN
5.10.4
1.27
6.20.3
4.40.2
0.15+0.1
0.05
0.50.1
0.40.1
0t
1.50.1
1.550.15
0.050.05
0.10
0.40.1
o1
0
1.27
0.995max.
0.12 M
VIN
VOUT
1
CSS
R1
R1
CIN
OCP
R2
AMP1
ON/OFF
-
ADJ
2
TSD
CB 4
VC
OCP(2)
Drive
REF
VB
5
GND
Open:OFF
Low: OFF
High: ON
CO
Reference Data
Copper Laminate Area - Power Dissipation
1.2
Ta=25C
Pd (W)
1
Ta=50C
0.8
0.6
Ta=80C
0.4
0.2
0
10
100
1000
2
ICs
85
Parameter
(Ta=25C)
Symbol
Ratings
Unit
VIN*1
10
VC
DC Output Current
IO*1
3.0
Power Dissipation
PD*3
Junction Temperature
Tj
30 to +125
Top
30 to +85
Storage Temperature
Tstg
40 to +125
j-a
33.3
C/W
j-c
C/W
DC Input Voltage
Applications
Secondary stabilized power supply (local
power supply)
Symbol
Input Voltage
Ratings
*2
VIN
Output Current
Unit
to 6*1
IO
0 to 3
Top (a)
20 to +85
Top (j)
20 to +100
VOADJ
1.2 to 5
Remarks
*1: VIN (max) and IO (max) are restricted by the relation PD = (VIN - VO) IO.
*2: Set the input voltage to 2.4V or higher when setting the output voltage to 2.0V or lower (SI-3011ZD).
*3: When mounted on glass-epoxy board of 40 40mm (copper laminate area 100%).
Electrical Characteristics
Parameter
Symbol
Output Voltage
(Reference Voltage VADJ for SI-3011ZD)
1.078
Conditions
max.
min.
1.100
1.122
3.234
VIN=VO+1V, IO=10mA
Conditions
Load Regulation
VDIF
1
Conditions
RREJ
Conditions
*4
VC, IH
VC, IL
VC
Control Current(Output ON)
Terminal
Control Current(Output OFF)
VIN=5V, VC=0V
0.3
0.3
Tj=0 to 100C
Tj=0 to 100C
60
60
0.8
100
100
VC=2.7V
5
0
VC=0V
VC=2.7V
5
0
VC=0V
mV
V
mA
2
0.8
mV
dB
VIN=5V
mV/ C
3.2
IC, IH
IC, IL
1.5
1
VIN=VO+1V
Conditions
Conditions
1
VIN=5V, IO=0A, VC=2V
3.2
Conditions
1.5
VIN=VO+1V, VC=0V
VO/Ta
IS1
0.6
IO=3A
Conditions
Current*2
VIN=5V, IO=0 to 3A
Iq (OFF)
Ripple Rejection
40
0.6
Iq
Temperature Coefficient
of Output Voltage
10
IO=3A (VO=2.5V)
Conditions
3.366
Conditions
3.300
40
Conditions
Dropout Voltage
max.
VIN=5V, IO=10mA
VOLOAD
Unit
typ.
10
VOLINE
Line Regulation
VO (VADJ)
SI-3033ZD
typ.
A
A
*1: Set the input voltage to 2.4V or higher when setting the output voltage to 2.0V or lower.
*2: IS1 is specified at the 5% drop point of output voltage VO under the condition of Output Voltage parameter.
*3: Output is OFF when the output control terminal (VC terminal) is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
*4: These products cannot be used for the following applications because the built-in foldback-type overcurrent protection may cause errors during start-up stage.
(1) Constant current load (2) Positive and negative power supply (3) Series-connected power supply (4) VO adjustment by raising ground voltage
86
ICs
SI-3000ZD Series
(Unit : mm)
10.0
4.5
+0.10
1.3 0.05
(6.8)
0.3
0.1
0.2
(R0.3)
0.2
4.9
2.54
0.3
2.0
2.4
(R0.3)
(0.75)
0.2
0.10
Pin Assignment
q VC
w VIN
e GND (Common to the rear side of product)
r VO
t Sense
(ADJ for SI-3011ZD)
15.30
15.3
9.2
0.3
0.15
0.10
(3)
(3)
4.9
0.88
0.2
(2R0.45)
(3)
0.2
0.2
9.2
(4.6)
3-R0.3
1.5 Dp:
(4.4)
0.2
(1.75)
1.2
(15)
0.2
(8.0)
0.2
(0.40)
Case temperature
measurement point
0~6
(0.5)
0.1
0.1
(1.7
0.8
0.25
)
(1.7
0.25
)
1
4
9.9
(1.7
0.8
0.25
(1.7
)
0.25
0.2
(3)
(3)
2-R0.3
10.0
0.1
0.02
Block Diagram
SI-3011ZD
VIN
R3
Drive
ON/
OFF
1
TSD
OCP
AMP1
REF
R1
+
CIN
VC
VO
ADJ
CO
R2
3
GND
SI-3033ZD
VIN
VO
CIN
VC
ON/
OFF
1
TSD
OCP
AMP1
SENSE
REF
Drive
CO
3
GND
Reference Data
Copper Laminate Area (on Glass-Epoxy Board) vs.
Thermal Resistance (from Junction to Ambient Temperature) (Typical Value)
Junction to Ambient Temperature
Thermal Resistance j-a (C/W)
55
A higher heat radiation effect can be achieved by enlarging the copper laminate
area connected to the inner frame to which a monolithic IC is mounted.
Obtaining the junction temperature
Measure GND terminal temperature TC with a thermocouple, etc. Then substitute
this value in the following formula to obtain the junction temperature.
50
When Using Glass-Epoxy Board of 40 40 mm
45
40
Tj=PD jC+TC
PD= (VINVO)IOUT
35
30
0
200
400
600
800
1000
1200
1400
1600
1800
ICs
87
Parameter
Applications
Secondary stabilized power supply (local
power supply)
Symbol
SI-3010KF
Unit
Remarks
DC Input Voltage
VIN
35*1
Vc
VIN
DC Output Current
Io
1.0
PD1
16.6
PD2
1.72
Junction Temperature
Tj
40 to +125
Storage Temperature
Tstg
40 to +125
Top
40 to +100
j-c
6.0
C/W
j-a
58
C/W
Power Dissipation
(Ta=25C)
Ratings
*1: A built-in input-overvoltage-protection circuit shuts down the output voltage at the Input Overvoltage Shutdown Voltage
of the electrical characteristics.
Symbol
Unit
SI-3010KF
VIN
2.4*2 to 27*1
IO
0 to 1.0*1
VOADJ
1.1 to 16
Top
30 to +85
Tj
20 to +100
*1: VIN (max) and IO (max) are restricted by the relationship PD (max) = (VIN - VO) IO = 16.6W.
*2: Refer to the Dropout Voltage parameter.
Electrical Characteristics
Ratings
Parameter
Symbol
SI-3010KF
min.
VADJ
Reference Voltage
0.98
max.
1.00
1.02
VIN=7V, IO=0.01A,
VC=2V, VO=5A
Conditions
VOLINE
Line Regulation
30
75
Conditions
Conditions
VC
Terminal
mV/ C
75
dB
Conditions
VIN=7V, VC=2V
2
Conditions
VIN=7V
VC, IL
0.8
Conditions
VIN=7V
IC, IH
40
Conditions
VIN=7V, VC=2V
5
Conditions
VOVP
0.5
Conditions
Conditions
Conditions
IC, IL
VIN=7V, VC=0V
VO/Ta
VC, IH
600
VIN=7V, IO=0A, VC=2V
Iq (OFF)
IS1
0
VIN=7V, VC=0V
33
IO=0.01A
*3: IS1 is specified at the 5% drop point of output voltage VO on the condition that VIN = overcurrent protection starting current, IO = 10 mA.
*4: Output is OFF when the output control terminal VC is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
*5: SI-3000KFE cannot be used in the following applications because the built-in foldback-type overcurrent protection may cause errors during start-up stage.
(1) Constant current load (2) Positive and negative power supply (3) Series-connected power supply (4) VO adjustment by raising ground voltage
88
ICs
Iq
RREJ
Ripple Rejection
mV
0.3
Conditions
Conditions
mV
Conditions
VDIF
Dropout Voltage
Conditions
VOLOAD
Load Regulation
Unit
typ.
A
A
V
SI-3000KF Series
Block Diagram
Ta-PD Characteristics
SI-3010KF
20
VIN 2
4 VOUT
VC 1
5 ADJ
TSD
3 GND
Silicone Grease:
G746 (Shin-Etsu Chemical)
Heatsink: Aluminum
15
2002002mm (2.3C/W)
10 1001002mm (5.2C/W)
75752mm (7.6C/W)
5
Without Heatsink
REF
0
30
20
0
20
40
60
80
Ambient Temperature Ta (C)
100
D1*1
VIN
2
VO
4
R1
+
VC GND ADJ
1
5
3
CIN
Load
CO
*2
R2
R3
R1=(VOVADJ)(VADJ/R2)
*1. D1: Reverse bias protection diode
This diode is required for protection against reverse
biasing between the input and output.
(Sanken RU2Z is recommended.)
(Unit : mm)
4.20.2
0.2
2.8
(17.9)
16.90.3
4.00.2
7.90.2
3.20.2
0.5
0.2
10.0
(2.0)
2.60.1
0.15
P1.70.74=6.80.7
(4.6)
+0.2
0.85 0.1
4.60.6
0.95
+0.2
0.45 0.1
3.90.7
Pin Assignment
q Vc
w VIN
e GND
r Vout
t ADJ
Plastic Mold Package Type
Flammability: UL 94V-0
Product Mass: Approx. 2.3 g
(4.3)
8.20.7
1 2 3 4 5
ICs
89
Parameter
10
VC
DC Output Current
IO*1
3.0
PD1
PD2
Tj
30 to +125
Top
30 to +100
Storage Temperature
Tstg
30 to +125
j-c
5.0
C/W
j-a
C/W
Power Dissipation
Junction Temperature
Applications
Secondary stabilized power supply (local
power supply)
Unit
VIN*1
Ratings
DC Input Voltage
(Ta = 25C)
Symbol
Symbol
Ratings
*2
to 6*1
Unit
Input Voltage
VIN
Output Current
IO
0 to 3
Top (a)
20 to +85
Top (j)
20 to +100
VOADJ
1.2 to 5
*1: VIN (max) and IO (max) are restricted by the relationship PD = (VIN - VO) IO.
*2: Set the input voltage to 2.4V or higher when setting the output voltage to 2.0V or lower.
Electrical Characteristics
Symbol
Parameter
SI-3011ZF
min.
VADJ
Reference Voltage
max.
1.100
1.122
VIN=VO+1V, IO=10mA
VOLINE
Line Regulation
10
Conditions
VOLOAD
Load Regulation
40
Conditions
VDIF
Dropout Voltage
0.7
Conditions
IO=3A (VO=2.5V)
Iq
Conditions
Conditions
VIN=VO+1V, VC=0V
VO/Ta
Temperature Coefficient
of Output Voltage
0.3
Conditions
60
Conditions
IS1
ON)*3
VC, IH
VC, IL
VC
Control Current(Output ON)
Terminal
Control Current(Output OFF)
3.2
2
0.8
IC, IH
IC, IL
Conditions
100
VC=2.7V
5
0
VC=0V
*1: Set the input voltage to 2.4V or higher when setting the output voltage to 2.0V or lower.
*2: IS1 is specified at the 5% drop point of output voltage VO under the Output Voltage parameter conditions.
*3: Output is OFF when the output control terminal VC is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
*4: These products cannot be used in the following applications because the built-in foldback-type overcurrent protection may cause errors during start-up stage.
(1) Constant current load (2) Positive and negative power supply (3) Series-connected power supply (4) VO adjustment by raising ground voltage
90
ICs
mV
V
mA
VIN=VO+1V
Conditions
mV
dB
Conditions
mV/ C
Tj=0 to 100C
RREJ
Ripple Rejection
1.5
Iq (OFF)
1.078
Conditions
Unit
typ.
A
A
SI-3000ZF Series
(Unit : mm)
4.20.2
0.2
2.8
0.2
Pin Assignment
q VC
w VIN
e GND
r Vo
t ADJ
(17.9)
16.90.3
4.00.2
7.90.2
3.20.2
0.5
10.0
(2.0)
2.60.1
0.15
0.95
4.60.6
(4.6)
+0.2
0.85 0.1
+0.2
P1.70.74=6.80.7
0.45 0.1
3.90.7
(4.3)
8.20.7
1 2 3 4 5
SI-3011ZF
VIN
VO
R3
Drive
VC
ON/
OFF
1
TSD
OCP
AMP1
REF
R1
+
CIN
ADJ
CO
R2
3
GND
Ta-PD Characteristics
25
20
15
10
2002002mm (2.3C/W)
1001002mm (5.2C/W)
75752mm (7.6C/W)
5
Without heatsink
0
30
25
50
75
100
ICs
91
Selection Guide
2-Phase Stepper Motor Unipolar Driver ICs
Excitation Method
1.0
1.5
2.0
3.0
Motor Supply
Voltage (V)
Package
Remarks
Page
SLA7022MU
SLA7029M
to 46
SMA7022MU
SMA7029M
to 46
ZIP15Pin
SLA7027MU
SLA7024M
SLA7026M
to 46
SLA7070MR
SLA7071MR
SLA7073MR
to 46
to 46
to 46
Built-in sequencer, Current sensing resistors, Protection circuit , Thermal protection circuit
to 46
102
STA7130MPR STA7131MPR
to 46
ZIP18Pin
Built-in sequencer, Current sensing resistors, Protection circuit, Thermal protection circuit
104
to 46
Surface-Mount 44Pin
106
to 46
to 46
to 46
Built-in sequencer, Current sensing resistors, Protection circuit , Thermal protection circuit
96
2-Phase Excitation
2-Phase/1-2 Phase
Excitation
SLA7072MR
STA7132MPR
SI-7321M
4W 1-2 Phase Excitation
Step Support
SLA7075MR
SLA7076MR
SLA7077MR
SLA7078MR
98
Built-in sequencer, Current sensing resistors
Part Number
Package
Remarks
Page
SI-7510
to 44
DIP30Pin
110
Package
Remarks
Page
10 to 44
ZIP18Pin
112
STA6940M
Maximum
4.0
8.0(tw<100S)
92
Part Number
Package
Remarks
Page
SPI-6631M
3.0
13 to 33
HSOP16Pin
Predrive+Power
114
SI-6633M
4.0
10 to 38
QFN36
1-chip
116
SI-6633C
10 to 38
QFN36
Controller
118
ICs
100
108
Maximum Output
Input
Voltage Current
Main
RDS(on)/
Switch
VCE(sat)
Package
Function*1
Package
Type
OCL
TD
TSD
FO
Reg
SX68001MH
1.5(max)
SOP_27Pin Surface-mount
SX68002MH
1.5A MOSFET
4.0(max)
SOP_27Pin Surface-mount
SX68003MH
2.5A MOSFET
2.4(max)
SOP_27Pin Surface-mount
SMA6821MH
1.5(max)
SIP_24Pin
Full Mold
500V
Main Application
Page
Fan motor
120
Fan motor
122
Fan motor
124
126
SMA6822MH
1.5A MOSFET
4.0(max)
SIP_24Pin
Full Mold
SMA6823MH
2.5A MOSFET
2.4(max)
SIP_24Pin
Full Mold
SMA6862MZ
1.5A MOSFET
4.0(max)
SIP_24Pin
Full Mold
SMA6863MZ
MOSFET
2.4(max)
SIP_24Pin
Full Mold
SMA6865MZ
1.7(max)
SIP_24Pin
Full Mold
SLA6868MZ
MOSFET
2.4(max)
SIP_24Pin
With Fin
SLA6870MZ
3.0A MOSFET
1.7(max)
SIP_24Pin
With Fin
SIM6811M
2.0A MOSFET
4.0(max)
DIP_40Pin
Full Mold
SIM6812M
2.5A MOSFET
2.4(max)
DIP_40Pin
Full Mold
IGBT
1.75V(typ)
DIP_40Pin
Full Mold
IGBT
1.75V(typ)
DIP_40Pin
Full Mold
Refrigerator compressor
10A
IGBT
1.7V(typ)
DIP_33Pin
Full Mold
SCM1243MF
15A
IGBT
1.7V(typ)
DIP_33Pin
With Fin
Air-conditioner compressor,
Washing machine
Air-conditioner compressor,
Washing machine
SCM1245MF
20A
IGBT
1.7V(typ)
DIP_33Pin
With Fin
Air-conditioner compressor
SCM1246MF
30A
IGBT
1.7V(typ)
DIP_33Pin
With Fin
Air-conditioner compressor
5A
MOSFET
0.8(max)
DIP_33Pin
Full Mold
Refrigerator compressor
Fan motor
128
SIM6822M
5A
SIM6827M*2
SCM1241M
SCM1248M
600V
500V
130
*1: 3.3V,5V
3.3 V and 5 V input levels are supported
UVLO ....... Under voltage lockout protection
OCP ......... Over current protection
OCL ......... Overcurrent limiting
TD ............ Thermal detection
TSD .......... Thermal shutdown
FO ............ Fault output
3shunt ...... 3 shunt support
Boot_Di .... Built-in bootstrap diode
STP .......... Shoot through prevention
Reg .......... Built-in regulator output
*2: SIM6827M is the low noise version of SIM6822M.
ICs
93
94
ICs
Application Note
Setup Precautions
Handling Precautions
When using the following products that use C-MOS circuits for input
terminals, observe the following.
SLA707xMR, MPR, MPRT
SLA708xMPR
SLA6800M Series
SMA6800M Series
STA713xM
STA6940M
SPI-6631M
SCM1200M Series
SX68000M Series
SI-66xx Series
SIM6800M Series
Carefully control the humidity of the room to prevent the buildup of static
electricity. Since static electricity is particularly a problem during the
winter, be sure to take sufficient precautions.
Take care to make sure that static electricity is not applied to the IC
during wiring and assembly. Take precautions such as shorting the
terminals of the printed circuit board to ensure that they are at the same
electrical potential.
ICs
95
(Ta=25C)
Ratings
Parameter
Symbol
SLA7022MU
SLA7029M
SMA7022MU
SMA7029M
Unit
VCC
46
VDSS
100
VS
46
VIN
Reference Voltage
VREF
Output Current
IO
PD1
PD2
Power Dissipation
1.5
1.5
W
W
Channel Temperature
Tch
+150
Storage Temperature
Tstg
40 to +150
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Symbol
SLA7022MU
min.
DC Characteristics
max.
IS
10
15
Condition
VS=44V
VS
10
VDSS
100
Condition
44
Switching Time
96
ICs
24
44
VDSS=100V, VS=44V
1.1
40
0.8
VIL=0.4V, VS=44V
VIL=0.4V, VS=44V
V
mA
V
mA
2
ID=1A
ID=1A
0.8
0.8
VDSS=100V
VDSS=100V
VIH=2.4V, VS=44V
VDSS=100V
2
VDSS=100V
0.8
ID=1A
40
0.8
ID=1A
ID=1A, VS=14V
ID=1A
mA
0.6
0.8
VDSS=100V
VDSS=100V
44
VS=44V, IDSS=250A
VIH=2.4V, VS=44V
24
ID=1A
0.8
VDSS=100V
10
1.2
ID=1A
0.8
VIL
44
VDSS=100V, VS=44V
15
100
0.8
ID=1A
10
VIL=0.4V, VS=44V
24
ID=1A, VS=14V
VIH=2.4V, VS=44V
max.
0.85
40
VIL=0.4V, VS=44V
Unit
typ.
VS=44V
1.1
0.8
min.
VS=44V, IDSS=250A
ID=1A
VIH=2.4V, VS=44V
VIL
10
VDSS=100V, VS=44V
40
Condition
15
100
1.2
IIL
10
ID=1A
Condition
max.
VS=44V
ID=1A, VS=14V
VSD
SMA7029M
typ.
0.6
VDSS=100V, VS=44V
Condition
Condition
15
Condition
Condition
10
min.
VS=44V, IDSS=250A
ID=1A, VS=14V
Condition
max.
0.85
IDSS
VIH
10
VS=44V, IDSS=250A
Condition
VIH
TTL Input Voltage (Active High)
SMA7022MU
typ.
100
IIH
TTL Input Current
min.
VS=44V
24
VDS
Condition
AC Characteristics
SLA7029M
typ.
VDSS=100V
0.8
ID=1A
0.8
ID=1A
Tr
0.5
0.5
0.5
0.5
Condition
VS=24V, ID=0.8A
VS=24V, ID=1A
VS=24V, ID=0.8A
VS=24V, ID=1A
Tstg
0.7
0.7
0.7
0.7
Condition
VS=24V, ID=0.8A
VS=24V, ID=1A
VS=24V, ID=0.8A
VS=24V, ID=1A
Tf
0.1
0.1
0.1
0.1
Condition
VS=24V, ID=0.8A
VS=24V, ID=1A
VS=24V, ID=0.8A
VS=24V, ID=1A
SLA7022MU/SLA7029M/SMA7022MU/SMA7029M
INB
VS
Reg
12
13
1pin
6pin
10pin
15pin
RSB
TDB
GNDB
15
GNDA
TDA
7
10
1, 6, 10, 15pin
Description of pins
REFA
RSA
14
Reg
REFB
INA
11
11
INB
TdA
TdB
14
INB
INA
clock
r5
GA
4
GB
12
H H
tdA
INB
tdB
L H
C4
r6
INA
INB
C2
r2
Rs
Open
collector
tdA
15
INA
r1
r2
r3
r4
r5
r6
tdB
:
:
:
:
:
:
510
100 (VR)
47k
47k
2.4k
2.4k
C1
C2
C3
C4
Rs
:
:
:
:
:
(1~2W)
330 to 500pF
330 to 500pF
2200pF
2200pF
1.8 typ (7022MU)
1 typ (7029M)
(Unit:mm)
SLA7022MU/SLA7029M
310.2
24.40.2
16.40.2
4.80.2
1.70.1
40.2
+0.2
0.65 0.1
+0.2
1.15 0.1
40.7
14P2.030.4=28.420.8
30
Lot No.
Part No.
1.45 0.15
6.7 0.5
8.5max
10.20.2
2.5 0.2
0.620.1
1.160.15
(3)
2.20.4
6.30.6
7.50.6
4.60.6
30.6
+0.2
1.15 0.1
+0.2
0.55 0.1
1.60.6
+1
9.7 0.5
+0.2
0.65 0.1
(3)
R-End
+0.2
2.450.2
0.55 0.1
Part No.
Lot No.
6.70.5
9.9 0.2
16 0.2
13 0.2
310.2
3 0.6
3.2 0.153.8
(9.7)
3.2 0.15
SMA7022MU/SMA7029M
Epoxy resin package
+0.2
0.65 0.1
1.16 +0.2
0.1
+0.2
0.55 0.1
4 0.7
P2.030.114=28.42
1.20.1
(5.9)
(7.5)
(4.6)
10
r1
r4
C1
+0.2
r3
1.6 0.6
8
VS
INA
0.55 0.1
Vb (5V)
clock
P2.030.114=28.42
31.3 +0.2
31.30.2
1 2 3 . . . . . . . 15
12 3 . . . . . . . 15
123 . . . . . . .
12 3 . . . . . . . 15
15
ICs
97
SLA7027MU/SLA7024M/SLA7026M
(Ta=25C)
Ratings
Symbol
SLA7027MU
SLA7024M
Unit
SLA7026M
VCC
46
VDSS
100
VS
46
Input Voltage
VIN
Reference Voltage
VREF
Output Current
IO
1.5
PD1
PD2
35 (TC=25C)
Channel Temperature
Tch
+150
Storage Temperature
Tstg
40 to +150
Power Dissipation
Electrical Characteristics
Ratings
Parameter
Symbol
SLA7027MU
min.
DC characteristics
typ.
max.
IS
10
15
Condition
VS=44V
VS
10
VDSS
100
Condition
IDSS
(Active Low)
Switching Time
98
ICs
10
15
24
4
VDSS=100V, VS=44V
2.3
ID=3A
40
VIH=2.4V, VS=44V
0.8
0.8
VIL=0.4V, VS=44V
VIL=0.4V, VS=44V
2
ID=1A
ID=3A
0.8
0.8
VDSS=100V
V
mA
V
A
mA
VDSS=100V
2
VDSS=100V
0.8
VDSS=100V
mA
V
0.85
40
ID=1A
44
ID=3A, VS=14V
VIH=2.4V, VS=44V
24
VS=44V, IDSS=250A
ID=1A
VIL=0.4V, VS=44V
VIL
10
1.1
0.8
VIL
15
40
Condition
44
VDSS=100V, VS=44V
10
VS=44V
ID=1A, VS=14V
VIH=2.4V, VS=44V
IIL
max.
0.6
ID=1A
Unit
typ.
100
1.2
Condition
min.
VS=44V, IDSS=250A
VDSS=100V, VS=44V
Condition
VIH
10
VSD
Condition
44
ID=1A, VS=14V
Condition
TTL Input Voltage
max.
0.85
Condition
SLA7026M
typ.
VS=44V
VS=44V, IDSS=250A
Condition
VIH
min.
100
VDS
Condition
AC characteristics
24
IIH
TTL Input Current
SLA7024M
2
VDSS=100V
0.8
VDSS=100V
0.8
0.8
Condition
ID=1A
ID=1A
Tr
0.5
0.5
0.5
Condition
VS=24V, ID=0.8A
VS=24V, ID=1A
VS=24V, ID=1A
ID=3A
Tstg
0.7
0.7
0.7
Condition
VS=24V, ID=0.8A
VS=24V, ID=1A
VS=24V, ID=1A
Tf
0.1
0.1
0.1
Condition
VS=24V, ID=0.8A
VS=24V, ID=1A
VS=24V, ID=1A
SLA7027MU/SLA7024M/SLA7026M
12
Reg
Reg
17
16
IN B
VSB
VSA
IN A
IN A
IN B
11
1, 8, 11, 18pin
Description of pins
Excitation input signal
3 14
13
Active L
Pin 1
OUTA
OUTA
Pin 8
OUTA
OUTA
Pin 11
OUTB
OUTB
Pin 18
OUTB
OUTB
RSB
GB
TDB
REFB
REFA
TDA
GA
RSA
Active H
15
10
Vb (5V)
r3
7 12
8
VSA VSB OUTA
2
13
C2
r2
INA
17
INB
16
INB
GB
15
GA
4
INA
INA
INB
r5
r6
INA
INB
INB
Active
High
INB
clock
IN A
IN A
IN B
IN B
C4
C3
Rs
INA
SLA7024M
7026M
7027MU
TdA
TdB
INA
11
OUTB
r1
r4
C1
1
18
OUTA OUTB
clock
Rs
r1
r2
r3
r4
r5
r6
C1
C2
C3
C4
Rs
510
100 (VR)
: 47k
: 47k
: 2.4k
: 2.4k
: 470pF
: 470pF
: 2200pF
: 2200pF
: 1 typ (7024M)
(1 to 2W)
0.68 typ (7026M)
1.8 typ (7027MU)
r1
r2
r3
r4
r5
r6
C1
C2
C3
C4
Rs
Active Low
VCC (46V max)
clock
INA
INA
INB
INB
Vb (5V)
r3
C1
7 12
8
1
18
VSA VSB OUTA OUTA OUTB
11
OUTB
r1
r4
C2
r2
2 TdA
TdB
13
INA
SLA7024M
7026M
7027MU
INA
17
INB
GA
4
INB
GB
15
16
INA
INA
INB
Active
Low
INB
clock
INA
C4
r5
r6
Rs
INA
INB
INB
:
:
:
:
:
2.20.6
60.6
7.50.6
+0.2
+0.2
1 0.1
0.55 0.1
1.6 0.6
+0.2
0.65 0.1
+0.2
0.55 0.1
40.7
17P1.680.4=28.561
+1
(3)
+0.2
1 0.1
3 0.6
2.450.2
R-End
+0.2
0.65 0.1
4.6 0.6
Part No.
Lot No.
4.8 0.2
1.70.1
6.70.5
9.9 0.2
16 0.2
13 0.2
3.20.153.8
510
100 (VR)
47k
47k
2.4k
2.4k
470pF
470pF
2200pF
2200pF
1 typ (7024M)
0.68 typ (7026M)
1.8 typ (7027MU)
(Unit : mm)
9.7 0.5
310.2
24.40.2
16.40.2
3.20.15
(1 to 2W)
17P1.680.4=28.561
31.30.2
1 2 3 . . . . . . . 18
123 . . . . . . . 18
ICs
99
SLA7070MR, MPR, MPRT/7071MR, MPR, MPRT/7072MR, MPR, MPRT/7073MR, MPR, MPRT 2-Phase/1-2 Phase Excitation Support, Built-in Sequencer
For new designs, use SLA707xMPRT.
Features
Parameter
Symbol
Ratings
Unit
VM
VBB
VDD
Io
VIN
VREF
VRS
46
46
6
*1
V
V
V
A
V
V
V
Output Current
Built-in sequencer
Sense Voltage
Power Dissipation
Junction Temperature
Storage Temperature
0.3 to VDD+0.3
0.3 to VDD+0.3
2
4.7
17
+150
PD
Tj
Ta
Tstg
20 to +85
30 to +150
Remarks
Mode F
Excluding tw<1s
When Ta = 25C
When Tc = 25C
C
C
C
*1: Output current value may be limited for the SLA7070MR, MPR, MPRT (1.0 A), SLA7071MR, MPR, MPRT (1.5 A),
SLA7072MR, MPR, MPRT (2.0 A), and SA7073MR, MPR, MPRT (3.0 A), depending on the duty ratio, ambient
temperature, and heating conditions.
Be sure that junction temperature of Tj is not exceeded under any circumstances.
Rating
Symbol
min.
max.
Unit
Remarks
VM
44
VBB
10
44
VDD
3.0
5.5
Case Temperature
TC
90
Electrical Characteristics
Parameter
Main Supply Current
Logic Supply Current
Output MOSFET Breakdown Voltage
Output MOSFET ON Resistance
Sense Resistance
Symbol
IBB
IBBS
IDD
V(BR)DSS
VREF
VREFS
IREF
VSENSE
TSE
tcon
tcoff
RS
Vocp
Iocp
Ttsd
VFlagL
VFlagH
IFlagL
IFlagH
ModeF
Mode8
ton(min)
toff
0.7
0.45
0.25
0.18
0.85
1.0
0.95
0.95
ICs
0.85
0.6
0.4
0.24
1.1
1.25
1.2
2.1
250
0.75VDD
1
1
10
VREF
2.0
1.5
0.305
0.305
0.205
0.155
0.7
2.3
3.5
4.6
140
0.314
0.314
0.211
0.160
0.75
1.25VDD
1.25
100
70.7
3.2
12
1.25
1.25
In operation
Sleep 1 and Sleep 2 modes
VBB=44V, ID=1mA
SLA7070M, ID=1.0A
SLA7071M, ID=1.5A
SLA7072M, ID=2.0A
SLA7073M, ID=3.0A
SLA7070M, ID=1.0A
SLA7071M, ID=1.5A
SLA7072M, ID=2.0A
SLA7073M, ID=3.0A
When Clock Duty = 50%
A
V
S
S
S
100
0.296
0.296
0.199
0.150
0.65
mA
A
mA
V
A
0.3
0.45
0.4
0.45
VDD
0.04
0.04
0.04
0.04
2
Conditions
Unit
kHz
0.25VDD
* The direction in which current flows out of the device is regarded as negative.
100
max.
100
VF
Fclock
VIL
VIH
IIL
IIH
Ratings
typ.
15
100
5
RDS(ON)
min.
V
mA
%
%
s
s
Pin Assignment
Pin No.
OutB
PreDriver
Sequencer
&
Sleep Circuit
Protect
Protect
DAC
DAC
PWM
Control
PWM
Control
OSC
19
Synchro
Control
RS
20 21 22 23
Reg
PreDriver
OutB
11
OutB
9 16 10 15
MIC
SenseA
OutB
VBB
Clock
Reset
M3
CW/CCW
18
M2
15
M1
14
Flag
N.C.
Ref/Sleep1
VDD
OutA
OutA
OutA
OutA
1
17
SenseB
RS
OSC
12
The protect circuit is deleted and the flag pin is N.C. for SLA7070MR, 7071MR, 7072MR, and 7073MR.
Symbol
Function
1
Phase A output
OutA
2
3
Phase A output
OutA/
4
SenseA
Phase A current sense
5
6
N.C.
N.C.
M1
7
M2
Excitation mode/Sleep 2 setting input
8
9
M3
Clock
Step Clock input
10
VBB
Driver supply (motor supply)
11
12
Gnd
Device GND
Ref/Sleep1
Control current mode/Sleep 1 setting input
13
VDD
Logic supply
14
15
Reset
Internal logic reset input
CW/CCW
Normal/reverse control input
16
Sync
PWM control signal input
17
18
Protection circuit monitor output*1
Flag*1
SenseB
Phase B current sense
19
20
OutB/
Phase B current output
21
22
OutB
Phase B current output
23
*1: N.C. pin for SLA7070MR, 7071MR, 7072MR, and 7073MR.
Vs=10V to 44V
24.40.2
4.80.2
16.40.2
1.70.1
Gate burr
3.20.15 3.8
OutB OutB
3.20.15
Reset
Clock
CW/CCW
M2
M3
4(R1)
SLA7070M Series
(2-phase/1-2 phase
excitation)
+1
M1
Microcomputer,
etc.
2.450.2
(Measured at
the root)
9.5 0.5
9.90.2
Q1
CB
50.5
BB
12.90.2
CA
r1
OutA OutA
C1 VDD
160.2
+
Vcc=3.0V to 5.5V
R-end
Sync
N.C.
+0.2
Ref/Sleep1
SenseA
r2
r3
Gnd
22 P1.270.5 = 27.941
SenseB
31.30.2
(Including the resin burr)
C2
(4.3)
0.65 0.1
Flag
+0.2
0.55 0.1
0.7
4.5
(Measured at the tip)
One-point
Gnd
Logic Gnd
Power Gnd
ICs
101
SLA7080MPR/7081MPR/7082MPR/7083MPR
Features
2-Phase/1-2-Phase Excitation
Parameter
Motor Supply Voltage
Driver Supply Voltage
Logic Supply Voltage
Output Current
Logic Input Voltage
REF Input Voltage
Sense Voltage
Symbol
VM
VBB
VDD
Io
VIN
VREF
VRS
Power Dissipation
PD
Junction Temperature
Operating Ambient Temperature
Storage Temperature
(Ta=25C)
Ratings
46
46
6
*1
0.3 to VDD+0.3
0.3 to VDD+0.3
2
4.7
17
+150
20 to +85
30 to +150
Tj
Ta
Tstg
Unit
V
V
V
A
V
V
V
W
Conditions
Excluding tw<1s
When Ta = 25C
When Tc = 25C
C
C
C
*1: Output current value may be limited for the SLA7080MPR(1.0A), SLA7081MPR(1.5A), SLA7082MPR(2.0A),
SLA7083MPR(3.0A), depending on the duty ratio, ambient temperature, and heating conditions.
Do not exceed junction temperature of Tj under any circumstances.
Ratings
Symbol
min.
VM
VBB
VDD
10
3.0
VREF
0.04
Case Temperature
Tc
Unit
max.
44
44
5.5
0.3
0.45
0.4
90
V
V
V
V
C
Electrical Characteristics
Parameter
Main Supply Current
Logic Supply Current
Output MOSFET Breakdown Voltage
Output MOSFET ON Resistance
Symbol
V(BR)DSS
VREF
Rs
100
0.7
0.45
0.25
0.18
0.85
1.0
0.95
0.95
VF
Fclk
VIL
VIH
IIL
IIH
250
1
1
0.04
0.04
0.04
0.04
2.0
VREF0.03
0.296
0.296
0.199
0.150
102
ICs
VREF+0.03
0.314
0.314
0.211
0.160
Iocp
1.5
1.0
0.7
2.3
3.5
4.5
2.0
140
In operation
Sleep Mode
VBB=44V, ID=1mA
SLA7080M, ID=1.0A
SLA7081M, ID=1.5A
SLA7082M, ID=2.0A
SLA7083M, ID=3.0A
SLA7080M, ID=1.0A
SLA7081M, ID=1.5A
SLA7082M, ID=2.0A
SLA7083M, ID=3.0A
When Duty = 50%
0.75
s
S
S
S
V
A
2.5
1.25
1.25
SLA7080M
SLA7081M
SLA7082M
SLA7083M
Sleep (IBBS, output: OFF)
A
V
100
0.65
mA
A
mA
V
A
0.3
0.45
0.4
0.45
VDD
10
VREF
0.305
0.305
0.205
0.155
3.2
5.2
13
Conditions
Unit
kHz
0.25VDD
topp
1.5
Ttsd
VFlagL
Flag Output Voltage
VFlagH
1.25VDD
IFlagL
Flag Output Current
IFlagH
1.25
*The direction in which current flows out of the device is regarded as negative.
Blank time for load open
Thermal Protection Temperature
0.85
0.6
0.4
0.24
1.1
1.25
1.2
2.1
0.75VDD
on(min)
toff
TSE
tcon
tcoff
Vocp
max.
15
100
5
RDS(ON)
Sense Resistance
min.
Ratings
typ.
IBB
IBBS
IDD
Switching Time
VREFS
IREF
VSENSE
Conditions
S
C
V
mA
Including the resistance due to the product configuration (about 5 m) for SLA7080M
Including the resistance due to the product configuration (about 5 m) for SLA7081M
Including the resistance due to the product configuration (about 5 m) for SLA7082M
Including the resistance due to the product configuration (about 5 m) for SLA7083M
B_SEL: Low
B_SEL: High
Sleep
Phase IN Out ON
Phase IN Out OFF
When the motor coil shorts out
SLA7080MPR/7081MPR
SLA7082MPR
SLA7083MPR
Rear of case (at the saturation temperature)
IFlagL= 1.25mA
IFlagH= 1.25mA
SLA7080MPR/7081MPR/7082MPR/7083MPR
Pin Assignment
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Function
Symbol
Out A
Phase A output
/Out A
Phase A output
Sense A
B_SEL
INA
/INA
INB
/INB
VBB
Gnd
Ref/Sleep
VDD
Gnd1
Gnd2
Sync
Flag
Sense B
/Out B
Phase B output
Out B
Phase B output
(Unit : mm)
310.2
24.40.2
3.20.153.8
4.80.2
16.40.2
50.5
12.90.2
9.90.2
3.20.15
160.2
1.70.1
2.450.2
(Measured at the root)
+1
9.5 0.5
4(R1)
R-end
22P1.270.5=27.941
31.30.2
(Including the resin burr)
(4.3)
+0.2
0.65 0.1
+0.2
0.55 0.1
4.50.7
(Measured at the tip)
ICs
103
Symbol
Ratings
Unit
46
46
*1
V
V
A
V
V
V
VM
VBB
Io
VIN
VREF
VRS
Power Dissipation
PD
Junction Temperature
Storage Temperature
Tj
Ta
Tstg
(Ta=25C)
Parameter
0.3 to +6
0.3 to +6
0.5
3.5
12.5
+150
Remarks
Mode F
Excluding tw<1s
When Ta = 25C
When Tc = 25C
C
C
C
20 to +80
30 to +150
*1: Output current value may be limited for the STA7130MPR (1.0 A), 7131MPR (1.5 A), and 7132MPR (2.0 A),
depending on the duty ratio, ambient temperature, and heating conditions.
Do not exceed junction temperature of Tj under any circumstances.
Rating
Symbol
VM
VBB
Case Temperature
TC
max.
10
44
85
44
Electrical Characteristics
Parameter
Main Supply Current
Symbol
RDS(ON)
Sense Resistance
Fclock
VIL
VIH
IIL
IIH
VREF
VREFS
IREF
VSENSE
TSE
tcon
tcoff
100
0.7
0.25
0.18
0.85
0.95
0.95
Vocp
Iocp
ICs
V
Temperature at Pin-10 Lead (without Fin)
2.3
10
10
0
2.0
VREF/3-0.03
100
0.65
mA
mA
V
1.4
0.7
0.305
0.205
0.155
0.7
2.3
3.5
4.5
125
VREF/3+0.03
STA7130MPR
STA7131MPR
STA7132MPR
STA7130MPR
STA7131MPR
STA7132MPR
When Clock Duty = 50%
V
A
V
S
S
S
0.75
V
A
0.8
5
100
98.1
92.4
83.1
70.7
55.5
38.2
19.5
1.5
11.5
8.5
7
In operation
Sleep 1 and Sleep 2 modes
A
0.9
5.5
10
VREF/3
Conditions
Unit
kHz
0.7
Ttsd
VLOL
ILOL
ModeF
ModeE
ModeC
ModeA
Step Reference Current Ratio
Mode8
Mode6
Mode4
Mode2
PWM Minimum ON Time
ton(min)
toff1
toff2
PWM OFF Time
toff3
*The direction in which current flows out of the device is regarded as negative.
104
0.85
0.4
0.24
1.1
1.2
2.1
250
RS
max.
10
3
VF
min.
Ratings
typ.
IBB
IBBS
V(BR)DSS
Remarks
Unit
min.
C
V
mA
%
%
%
%
%
%
%
%
S
S
S
S
VREF=0.1V to 0.9V
Mode 8 to F
Mode 4 to 6
Mode 2
STA7130MPR/7131MPR/7132MPR
Pin Assignment
8 12
MIC
PreDriver
Sequencer
&
Sleep Circuit
Protect
1/3
Protect
DAC
+
Comp
-
3
Rs
18
Reg.
PreDriver
SenseA
17
OutB
7 13
OutB
VBB
Clock
Reset
CW/CCW
M2
Sleep2
15
M0
11
M1
Flag
Ref/Sleep1
OutA
TSD
Synchro
Control
PWM
Control
1/3
DAC
+
Comp
-
PWM
Control
DSC
16
Rs
DSC
14
Sync
SenseB
Pin No.
Symbol
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
OutA
Phase A output
Function
OutA/
Phase A output
Phase A current sense
SenseA
MO
M1
M2
Sleep2
Clock
VBB
Gnd
Device GND
Control current mode/Sleep 1 setting input
Ref/Sleep1
Reset
CW/CCW
Sync
Flag
SenseB
OutB/
Phase B output
OutB
Phase B output
10
Gnd
+
Q1
Sleep
r1
CA
C1
OutA
OutA
VBB
OutB
OutB
1.30.1
(Measured at the root)
r10
(6.9)
Reset
Clock
CB
CW/COW
Microcomputer,
etc.
M1
M2
+0.2
0.55
Sync
Mo
Gnd
+0.2
0.1
17XP1.270.5=21.591
(Measured at the tip)
Flag
Ref/Sleep1
SerseA
R1
(4
Sleep2
r4 to r9
R-end
STA7130MPR Series
Sense
(3.6)
r11
(1)
90.2
VDD=3.0V to 5.5V
40.2
3.30.5
25.250.3
VS=10V to 44V
0.45 0.1
2.540.5
(Measured at the tip)
r3
C1.50.5
C2
One-point
Gnd
Logic Gnd
Power Gnd
Forming No.
No.434
ICs
105
Symbol
VM
VBB
VDD
Io
VIN
VREF
VRS
PD
Tj
Ta
Tstg
(Ta=25C)
Ratings
46
46
6
1.5
0.3 to VDD+0.3
0.3 to VDD+0.3
2
3.5
+150
20 to +80
30 to +150
Unit
V
V
V
A
V
V
V
W
Conditions
Excluding tw<1s
When Ta = 25C
*: Output current value may be limited, depending on the duty ratio, ambient temperature, and heating
conditions.
Do not exceed junction temperature of Tj under any circumstances.
44-pin surface-mount
Ratings
Symbol
min.
VM
VBB
VDD
10
3.3
VREF
0.04
Case Temperature
Tc
Unit
max.
44
44
5.5
1.0
0.5
85
V
V
V
V
Electrical Characteristics
Parameter
Driver Supply Current
Logic Supply Current
Output MOSFET Breakdown Voltage
Output MOSFET ON Resistance
Output MOSFET Diode Forward Voltage
Maximum Clock Frequency
Logic Input Voltage
Logic Input Current
REF Input Voltage
Symbol
V(BR)DSS
RDS(ON)
VF
Fclk
VIL
VIH
IIL
IIH
VREF
Switching Time
tpdon1
min.
Ratings
typ.
IBB
IBBS
IDD
100
0.25
0.95
ICs
0.4
1.2
250
0.25VDD
0.75VDD
1
1
0.04
0.04
2
1.25
VDD-1.25
1.25
1.25
0.65
0.2
0.7
100
98.1
95.7
92.4
88.2
83.1
77.3
70.7
63.4
55.5
47.1
38.2
29.0
19.5
9.8
0.75
100
1.5
2.0
1.5
1.8
3.6
13
9.5
7.5
2
Unit
mA
A
mA
V
V
kHz
Conditions
In operation
Sleep Mode
VBB=44V, ID=1mA
ID=1.5A
IF=1.5A
When Duty = 50%
A
1.5
0.6
VDD
10
on(min)
toff1
toff2
toff3
topp
max.
15
100
5
The direction in which current flows out of the device is regarded as negative.
106
VREFS
IREF
VLOL
VLOH
ILOL
ILOH
VSENSE
Vocp
Mode F
Mode E
Mode D
Mode C
Mode B
Mode A
Mode 9
Mode 8
Mode 7
Mode 6
Mode 5
Mode 4
Mode 3
Mode 2
Mode 1
TSE
Conditions
2.5
A
V
V
mA
mA
V
V
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
S
S
S
s
s
s
s
s
s
VREF=0.2V, Mode F
against Vsence
VREF=0.04V to 1.5V
Sleep1&Sleep2
Clock Out ON
Clock Out OFF
B_SEL: L
B_SEL: H
Mode8 to F
Mode4 to 7
Mode1 to 3
Starts when the PWM is turned off.
SI-7321M
Pin Assignment
(Unit : mm)
9.90.3
7.50.2
18.60.3
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Symbol
Out/A
Out/A
N.C.
RsA
G/A
Gnd1
E_SEL
P_SEL
Sync
CW/CCW
Reset
Clock
M1
M2
M3
B_SEL
Gnd1
G/B
RsB
N.C.
Out /B
Out /B
OutB
OutB
N.C.
RsB
GB
Gnd1
Gnd2
Flag
Mo
VDD
Ref/Sleep1
Gnd3
N.C.
VBB
N.C.
Gnd4
Gnd1
GA
RsA
N.C.
Out A
Out A
Function
Phase A output
Phase A output
No connection
Connection terminal for phase A sense resistor
Phase A MOSFET gate
Device Gnd1
Edge selection input
Protection use selection input
PWM control signal input
Normal/reverse control input
Internal logic reset input
Step clock input
Excitation mode/Sleep 2 setting input
Blanking time selection input
Device Gnd1
Phase B MOSFET gate
Connection terminal for phase B sense resistor
No connection
Phase B output
Phase B output
Phase B output
Phase B output
No connection
Connection terminal for phase B sense resistor
Phase B MOSFET gate
Device Gnd1
Device Gnd2
Protection circuit monitor output
2-phase excitation state monitor output
Logic supply
Control current mode/Sleep 1 setting input
Device Gnd3
No connection
Driver supply (motor supply)
No connection
Device Gnd4
Device Gnd1
Phase A MOSFET gate
Connection terminal for phase A sense resistor
No connection
Phase A output
Phase A output
1.50 TYP
0.65
0.10
0.100.05
0.220.05
0 to 10
0.15 +0.1
0.05
2.20.1
2.17
0.50.2
0.12 M
ICs
107
SLA7075MR, MPR, MPRT/7076MR, MPR, MPRT/7077MR, MPR, MPRT/7078MR, MPR, MPRT 2-Phase to 4W 1-2 Phase Excitation Support, Built-in Sequencer
For new designs, use SLA707xMPRT.
Features
Parameter
Symbol
Ratings
Unit
VM
VBB
VDD
Io
VIN
VREF
VRS
46
46
6
*1
V
V
V
A
V
V
V
Sense Voltage
Power Dissipation
Junction Temperature
Storage Temperature
0.3 to VDD+0.3
0.3 to VDD+0.3
2
4.7
17
+150
PD
Tj
Ta
Tstg
20 to +85
30 to +150
Remarks
Vref=0.4V, Mode F
Excluding tw<1s
When Ta = 25C
When Tc = 25C
C
C
C
*1: Output current value may be limited for the SLA7075MR, MPR, MPRT (1.0 A), SLA7076MR, MPR, MPRT (1.5 A),
SLA7077MR, MPR, MPRT (2.0 A), and SA7078MR, MPR, MPRT (3.0 A), depending on the duty ratio, ambient
temperature, and heating conditions.
Do not exceed junction temperature of Tj under any circumstances.
Rating
Symbol
min.
max.
VM
Unit
44
V
V
Remarks
VS
10
44
VDD
3.0
5.5
Case Temperature
TC
90
Electrical Characteristics
Parameter
Main Supply Current
Logic Supply Current
Output MOSFET Breakdown Voltage
Output MOSFET ON Resistance
Sense Resistance
Symbol
V(BR)DSS
VREF
VREFS
IREF
VSENSE
TSE
tcon
tcoff
RS
Vocp
Iocp
108
ICs
100
0.7
0.45
0.25
0.18
0.85
1.0
0.95
0.95
VF
Fclock
VIL
VIH
IIL
IIH
Tstd
VLOL
VLOH
ILOL
ILOH
ModeF
ModeE
ModeD
ModeC
ModeB
ModeA
Mode9
Mode8
Mode7
Mode6
Mode5
Mode4
Mode3
Mode2
Mode1
ton(min)
toff1
toff2
toff3
max.
15
100
5
RDS(ON)
Ratings
typ.
IBB
IBBS
IDD
min.
0.85
0.6
0.4
0.24
1.1
1.25
1.2
2.1
250
1
1
0.04
0.04
0.04
0.04
2
0.3
0.45
0.4
0.45
VDD
10
VREF
2.0
1.5
0.305
0.305
0.205
0.155
0.7
2.3
3.5
4.6
140
0.314
0.314
0.211
0.160
0.75
V
A
C
1.25
1.25
100
98.1
95.7
92.4
88.2
83.1
77.3
70.7
63.4
55.5
47.1
38.2
29.0
19.5
9.8
1.7
12
9
7
VBB=44V, ID=1mA
SLA7075M, ID=1.0A
SLA7076M, ID=1.5A
SLA7077M, ID=2.0A
SLA7078M, ID=3.0A
SLA7075M, ID=1.0A
SLA7076M, ID=1.5A
SLA7077M, ID=2.0A
SLA7078M, ID=3.0A
When Clock Duty = 50%
A
V
S
S
S
VDD1.25
1.25
In operation
Sleep 1 and Sleep 2 modes
100
0.296
0.296
0.199
0.150
0.65
mA
A
mA
V
kHz
0.25VDD
0.75VDD
Conditions
Unit
specified
specified
specified
specified
current
current
current
current
limit
limit
limit
limit
mA
SLA707xMPR, MPRT
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
S
S
S
S
Mode 8 to F
Mode 4 to 7
Mode 1 to 3
Pin Assignment
Pin No.
OutB
PreDriver
Sequencer
&
Sleep Circuit
Protect
Protect
DAC
DAC
PWM
Control
PWM
Control
OSC
19
Synchro
Control
RS
20 21 22 23
Reg
PreDriver
SenseA
OutB
11
OutB
9 16 10 15
MIC
OutB
VBB
Clock
Reset
M3
CW/CCW
M2
18
M1
15
MO
14
Flag
Ref/Sleep1
VDD
OutA
OutA
OutA
OutA
RS
OSC
17
SenseB
12
Sync
Gnd
The protect circuit is deleted and the flag pin is N.C. for SLA7075MR, 7076MR, 7077MR, and 7078MR.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Symbol
Function
OutA
Phase A output
OutA/
Phase A output
Phase A current sense
SenseA
MO
M1
M2
M3
Clock
VBB
Gnd
Device GND
Control current mode/Sleep 1 setting input
Ref/Sleep1
Logic supply
VDD
Reset
CW/CCW
Sync
Flag*1
SenseB
OutB/
OutB
310.2
24.40.2
4.80.2
3.20.15 3.8
16.40.2
1.70.1
Gate burr
+
OutB OutB
3.20.15
Reset
Clock
M1
M2
M3
SLA7070M Series
(2-phase/4 W1-2 phase
excitation)
4(R1)
+1
CW/CCW
Microcomputer,
etc.
2.450.2
(Measured at
the root)
9.5 0.5
CB
9.90.2
Q1
50.5
BB
12.90.2
r1
OutA OutA
C1 VDD
160.2
CA
Vcc=3.0V to 5.5V
R-end
Sync
MO
+0.2
0.65 0.1
Ref/Sleep1
SenseA
r2
r3
Gnd
22P 1.270.5=27.941
SenseB
31.30.2
(Including the resin burr)
C2
+0.2
0.55 0.1
(4.3)
Flag
0.7
4.5
(Measured at the tip)
One-point
Gnd
Logic Gnd
Power Gnd
Forming No.
No.2151
ICs
109
Ratings
Unit
Parameter
VCC1
44
VCC2
VIN
0.3 to VCC2
VREF
0.3 to VCC2
VSENSE
VMC3
48
Power Dissipation
PD
1.6
Ta
10 to 80
Storage Temperature
Tstg
20 to 150
Junction Temperature
Tj
150
Remarks
Operating Ranges
Unit
Parameter
VCC1
10 to 42*
VCC2
3 to 5.5
VREF
0.1 to 1
*: Insert a 5V Zener diode between VCC1 and VMC3 when using with VCC1 of 35 V or more.
Electrical Characteristics
Parameter
Symbol
min.
typ.
Unit
ICC1
25
mA
ICC2
10
mA
VIL
1.25
Conditions
max.
VIH
3.75
IIL
20
20
VIL=0V
IIH
20
20
VIH=5.5V
IENA
100
20
VENA=0V
IREF
20
20
VREF=0 to 5.5V
SENSE Voltage
VSENSE
VREF=1V
SENSE Current
ISENSE
20
VSENSE=0V, 2V
IMOL=1mA
IMOH=1mA
MO Output Voltage
RC Pin Threshold Voltage
1
20
VMOL
VMOH
VRCL
0.5
VRCH
1.5
IRC
300
VMC3
VCC1+9
VHGSL
VHGSH
1
8.5
VLGL
7.5
V
V
Maximum CL Frequency
fck
TCON
PTW
1.5
TIO
CW/CCW, F/H
Input Data Setup Time
CW/CCW, F/H
Input Data Hold Time
110
ICs
100
V
1
VLGH
VRC=0V
KHz
TICS
500
TICH
500
Against CL
SI-7510
VCC2
Oscillator
Charge Pump
OHGA
OHSA
OHGB
OHSB
OHGC
OHSC
OHGD
OHSD
OHGE
OHSE
Enable
MO
Highside Drive
CL
Sequencer
F/H
CW/CCW
OLA
OLB
OLC
OLD
OLE
Lowside Drive
Reset
RC
PWM
Control
Ref
Sense
Gnd
C1
24V
5V
VCC2
MC1
MC2 MC3
4
30
29
28
27
26
25
24
23
22
21
R3
5
MO
CL
F/H
Logic Signal
Input and Output
CW/CCW
Reset
SI-7510
Enable
10
11
C4
R1Ref
4 5 10 15
3
9
1
7
14 SLA5073 8
12
13
2
6
11
OHGA
OHSA
OHGB
OHSB
OHGC
OHSC
OHGD
OHSD
OHGE
OHSE
20
19
18
OLA
OLB
OLC
4
3
9
7
13
12
15
RC
Ct
tOFF=1.1*Rt*Ct
5-phase SPM
New Pentagon
R2
C3
IO=VRS/RS
IOM=Io/2
*IOM : Motor Coil Current
VCC1
17
16
OLD
OLE
14
Sense
Pins 11 to 15: NC
SLA5074
R1=510
R2=100(VR)
R3=20K
RS=0.33(1 to 2W)
Rt=15 to 75K
Ct=420 to 1100pF
C1=2200pF
C2=0.01F
C3=0.1F
C4=0.01F
10
2
6
Gnd
Io
Rs
Rt
10
15
20
25
30
35
40
45
50
55
60
65
MC1
Function
MC3
MC2
VCC1
Enable
VCC2
MO
CL
Clock
F/H
10
CW/CCW
11
Reset
12
RC
13
Ref
14
Sense
15
Gnd
16
VOLE
17
VOLD
18
VOLC
19
VOLB
20
VOLA
21
VOHSE
22
VOHGE
23
VOHSD
24
VOHGD
25
VOHSC
26
VOHGC
27
VOHSB
28
VOHGB
29
VOHSA
30
VOHGA
Output OFF
Pin Name
Low Level
High Level
Positive Edge
Clock
Symbol
Truth Table
*Be especially careful of noise on the Vcc line. The product may malfunction if noise on the Vcc line is 0.5 V or more.
Pin No.
70
CW/CCW
Full/Half
4-phase excitation
Enable
Disable
Enable
Reset
Enable
Reset
75
CL
Reset
Enable
(Unit : mm)
CW/CCW
F/H
8.80.2
OHA
OHB
OHC
OHD
OHE
OLA
OLB
OLC
OLD
OLE
MO
Reset
75
CW, Full
80
85
CCW, Full
90
95
100
CCW, Half
105
CW, Half
28.20.3
110
CL
CW/CCW
F/H
+ 0.3
1.0 0.06
4.30.3
3.610.1
Enable
7.10.5
Reset
10.16
OHA
OHB
OHC
CL
0.1
0.25 +0.0
5
OHD
OHE
OLB
F/H
1.778
OLC
The range to Prohibit Switching
The range to
Prohibit Switching
500ns
500ns
Switchable Range
OLD
OLE
MO
2.80.2
CW/CCW
OLA
0 to 15
1.654 TYP
0.460.1
CW, Half
CCW,Full
Disable
Disable
Reset
ICs
111
STA6940M
Features
Parameter
Driver Supply Voltage
Logic Supply Voltage
Output Current
Logic Input Voltage
PWM REF Input Voltage
OCP REF Input Voltage
Sense Voltage
Symbol
VBB
VDD
Io
VIN
VPREF
VOREF
VRS
Ratings
44
6
8
0.3 to VDD+0.3
0.3 to VDD+0.3
0.3 to VDD+0.3
1 to 2
2.7
3.0
3.2
150
20 to 85
30 to 150
PD
Power Dissipation
Junction Temperature
Operating Ambient Temperature
Storage Temperature
Tj
Ta
Tstg
Unit
V
V
A
V
V
V
V
W
W
W
C
C
C
Conditions
100s or less
*: Output current value may be limited, depending on the duty ratio, ambient temperature, and heating
conditions. Do not exceed junction temperature of Tj under any circumstances.
Ratings
Symbol
min.
10
VBB
Io
VDD
VPREF
VOREF
Tc
Unit
max.
40
4.0
5.5
1
2
85
3.0
V
A
V
V
V
C
Electrical Characteristics
Parameter
Main Supply Current
Logic Supply Current
Charge Pump Voltage
Charge Pump Oscillation Frequency
Low Driver Supply Voltage Protection Voltage
Low Logic Supply Voltage Protection Voltage
Low Charge Pump Voltage Protection Voltage
Output MOSFET Breakdown Voltage
Output MOSFET ON Resistance
Output MOSFET Diode Forward Voltage
Logic Input Voltage
Logic Input Current
Maximum Logic Input Clock Frequency
PWM REF Input Voltage
PWM REF Input Current
OCP REF Input Voltage
OCP REF Input Current
Symbol
IBB
IDD
Vcp
Fcp
VUVBL
VUVBH
VUVDL
VUVDH
VUVCL
VUVCH
V(BR)DS
RDS(ON)
VF
VLIL
VLIH
ILIL
ILIH
fclk
VPREF
IPREF
VOREF
IOREF
VPSEN
VOSEN
112
ICs
Conditions
ISENSE
VLOL
VLOH
ILOL
ILOH
fDIAG
tpon(min)
tPOFF
toon(min)
tOOFF
tCOCD
tcon
tcoff
Ttsdon
Ttsdoff
min.
Ratings
typ.
max.
20
5
VBB+5
360
7
7.8
2.3
2.5
3.8
4
60
0.1
0.95
0.13
2.1
0.25VDD
0.75VDD
1
1
100
0.1
VPREF
0.045
VOREF
0.045
kHz
V
V
A
VPREF
+0.015
VOREF
+0.015
VBB=10V to 40V
against VBB
ID=250A
ID=4.0A
IF=4.0A
duty=50%
When controlling the current
VREF=0 to VDD
When controlling the current
VREF=0 to VDD
V
V
A
1.25
VDD1.25
1.25
1.25
90
5
35
5
142
V
V
mA
mA
kHz
s
s
s
s
750
3
2.7
140
115
V
V
V
150
In operation
10
10
VPREF
0.015
VOREF
0.015
20
mA
mA
V
kHz
V
V
V
V
V
V
V
0.1
Concitions
Unit
ILOL=1.25mA
ILOL=1.25mA
VLOL=1.25V
VLOH=VDD-1.25
During PWM operation
During OCP operation
ns
s
s
C
C
INOut ON
INOut OFF
Temperature of rear of package (at saturation)
STA6940M
VDD
7
13
Pin Assignment
CP2
12
CP
14
Pin No.
1
2,3
4
5
6
7
8
9
10
11
12
13
14
15
16,17
18
VBB VBB
1
18
MIC
Charge
Pump
Reg
UVLO
IN1
IN2
Diag
PWM_REF
OCP_REF
Logic Block
Pre_Driver
OA
16
17
11
8
OA
OB
OB
Symbol
VBB
OA
Sense 1
IN1
IN2
VDD
PWM_REF
OCP_REF
Gnd
Diag
CP2
CP1
CP
Sense 2
OB
VBB
Function
Main supply
Output terminal A
Constant current sense terminal
Output setting terminal
Logic supply
Constant current setting input terminal
Overcurrent setting input terminal
Device Gnd
Monitor terminal
Capacitor connection terminal for
charge pump
Overcurrent sense terminal
Output terminal B
Driver supply
Comp
Comp
OSC
PWM
&
OCP
Control
Reg
15
10
GND
Sense2
Sense1
25.250.3
(1)
3.30.5
Type No
(90.2)
Lot No
1.30.1
(6.9)
17xP1.270.5=21.591
(Measured at the tip)
C1.50.5
(3.6)
0.55 +0.2
0.1
R1
(4-
0.45 +0.2
0.1
2.540.5
(Measured at the tip)
25.55
(Including the resin burr)
ICs
113
SPI-6631M
Features
Parameter
Main Supply Voltage
MOSFET Output Breakdown Voltage
Output Current
Input Voltage
S Terminal Voltage
Alarm Terminal Voltage
Alarm Input Current
Power Dissipation
Junction Temperature
Storage Temperature
Operating Ambient Temperature
Symbol
VBB
VDSS
Iout
VIN
Vsen
Valarm
Ialarm
PD
Tj
Tstg
Ta
Ratings
35
35
3
0.3 to 6.5
2 to 2
6.5
1
2.6
150
30 to 150
20 to 85
Unit
V
V
A
V
V
V
mA
W
C
C
C
Conditions
DutyCycle=100%*
*: Output current value may be limited, depending on the duty ratio, ambient temperature, and heating
conditions. Do not exceed the rated current or maximum junction temperature (Tj = 150C).
Electrical Characteristics
Parameter
Main Supply Voltage
Main Supply Current
Maximum Clock Pulse Width
Input Voltage
Input Current
Crossover Dead Time
VB Terminal Breakdown Voltage
VB-OUT Breakdown Voltage
VB Terminal Current
Output Leakage Current
MOSFET ON Resistance
MOSFET Diode Forward Voltage
Overcurrent Sense Current
Overcurrent Protection Blank Time
Overcurrent Protection Delay Time
Thermal Protection Operation Temperature
Thermal Protection Hysteresis
Low Voltage Protection Operation Voltage
Low Voltage Protection Hysteresis
Alarm Output Voltage
114
ICs
min.
13
2.0
100
800
7
0.7
0.5
4.0
0.4
Ratings
typ.
8
20
500
VBB+5
5
0.4
1.2
1
170
15
4.5
0.45
max.
33
20
3
0.8
1200
3
800
0.7
2.2
4
2.2
5.0
0.5
0.5
Conditions
Unit
V
mA
s
V
V
A
A
ns
V
V
mA
A
A
V
A
s
ms
C
C
V
V
V
In operation
VIN(0), VIN=0.8V
VIN(1), VIN=2.0V
Breakdown voltage between VB and GND
VB-OUT=5V
VOUT=VBB=35V
VOUT=0V
IOUT=1A, Between VBB and OUT
ISD=1A
Short between Out and Out
VBB voltage
I=1mA
SPI-6631M
Pin Assignment
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Symbol
CP2
CP1
OUTU
S
OUTV
OUTW
Alarm
GND
INLW
INHW
INLV
INHV
VBB
INLU
INHU
VB
Function
Capacitor terminal for charge pump 2
Capacitor terminal for charge pump 1
DMOSFET phase U output
Sense terminal (lower arm source output)
DMOSFET phase V output
DMOSFET phase W output
Alarm output
Ground
Phase W lower arm input
Phase W upper arm input
Phase V lower arm input
Phase V upper arm input
Driver supply terminal
Phase U lower arm input
Phase U upper arm input
Capacitor terminal for charging up charge pump
(Unit : mm)
12.20 0.20
(Gate remains: Not included in dimensions)
7.50 0.20
4.30
16
10.50 0.30
7.70
+0.15
1.27
0.4 0.05
12.00 0.05
(Cavity)
2.50 0.05
2.75MAX
+0.15
0.25 0.05
ICs
115
SI-6633M
Features
Parameter
Supply Voltage
Output Voltage
Symbol
VBB
VOUT
IOUT(Ave)
Output Current*
IOUT(Peak)
Logic Input Voltage
VIN(Logic)
Analog Input Voltage
VIN(Analog)
Detection Voltage
VSENSE
Package Power Dissipation
PD
Maximum Junction Temperature
Tj
Storage Temperature
Tstg
Operating Ambient Temperature
Ta
(Ta=25C)
Ratings
0.3 to 38
VBB
2
4
0.3 to 5.5
0.3 to 6
0.5
2.9
150
40 to 150
20 to 85
Ratings
10 to 30
0 to 5.5
0 to 5.5
0.5 to 5.5
0.5
105
20 to 85
Electrical Characteristics
ICs
Unit
V
V
V
V
V
C
C
Conditions
During normal operation
Excluding REF
The control current precision degrades significantly at 0.5V or lower.
min.
Ratings
typ.
max.
10
6
90
5
200
50
0.1
0.8
0
2.5
0.1
0
20
0
3.5
1
0
0
5
0.5
0
10
0.6
1.1
3
15
54
1
0.05
VCPWMH
4.5
7.5
25
0.1
0
0.1
0
7
0.1
34
1.5
1
0.7
150
100
2
0.2
60
7.5
120
10
100
100
100
0.2
1.1
0.25
1
50
1.5
1
1
0.5
2.5
1.8
1.5
3.5
25
64
0.5
1.2
0.1
4
32.5
0.2
0.2
7.5
0.3
35
2
1.3
1
0.6
165
50
120
10
2.3
2.1
1.1
0.9
300
0.5
20
2
VBBOV
9
150
15
500
50
200
0.3
1.4
0.8
VDD
0.4
10
100
0.8
VDD
2
10
10
1
5.5
10
10
3
1.9
4
35
74
1
VCPWML
0.15
4.45
5.5
40
0.5
20
0.5
20
9
0.5
37.5
2.5
1.5
1.3
tLPFSEN
800
1
3.5
VHALL
3
Unit
V
V
kHz
mA
A
A
A
V
V
V
V
A
A
V
V
V
A
A
A
V
A
%
s
V
V
kHz
Hz
A
V
V
V
V
mA
k
V
A
V
A
V
V
V
V
V
V
s
C
C
C
C
s
s
s
s
ns
A
V
mV
mV
s
*: Use typ. data for design. The direction in which current flows out of the device is regarded as negative.
116
tw<10msec
*: The output current value may be limited, depending on the duty ratio, ambient temperature, and heating conditions.
Be sure to perform sufficient evaluation and verification by referring to the thermal design data and
application notes so that other ratings will not be exceeded under any circumstances.
Parameter
Symbol
Supply Voltage
VBB
Logic Input Voltage
VIN(Logic)
Analog Input Voltage
VIN(Analog)
REF Input Voltage
VRef
Detection Voltage
VSEN
Package Temperature
TC
Operating Ambient Temperature
Ta
Parameter
Conditions
Unit
V
V
A
A
V
V
V
W
C
C
C
Conditions
During motor driving
Output disabled, CP-VBB voltage
Output disabled
VSTBY=2.5V
VBB=38V, VOUT=0V
VBB=VOUT=38V
IDS=2.0A, S pin connected to GND
ISD=2.0A
VBB=38V
Hysteresis width
VSTBY=5V
Hysteresis width
VIN=0V
VIN=5.5V
VREF=0 to 5.5V
Enable, Brake,
Dir, SRMD,
Decay, PWM
VSEN=0 to 0.5V
VREF=5.5V
CPWM=1000pF
CLD=0.1F
AINP, AINN pin, VAIN=0 to 5.5V
When AOUT pin voltage rises
Hysteresis width
During output PWM operation
Output 100% ON
VAOUT=0V
VAOUT=2.5V
IFLAG=2mA
VFLAG=5.5V
IFG=2mA
VFG=5.5V
When VBB voltage rises
Hysteresis width
When VBB voltage rises
Hysteresis width
OUT-GND voltage, low side detection
VBB-OUT voltage, high side detection
When temperature rises
Hysteresis width
When temperature rises
Hysteresis width
HALL input Output ON
HALL input Output OFF
PWM input Output ON
PWM input Output OFF
VIN=0.2 to 4.2V
FLAG
FG
VCP=VBB+7V
Motor driving stopped
SI-6633M
Int. Reg 1
(Logic)
TOP VIEW
Charge Pump
Int. Reg 2
(Analog)
0.15 S
L k
D2/2
#19
Gate
Drive
OC&NV
Detect
HWP
#27
#18
#28
E2/2
E/2
Hall Amp
&
Comm Logic
OutU
HVM
0.15 S
UVLO
TSD&TA
HUM
D2
x2
D/2
HUP
HVP
BOTTOM VIEW
x2
E2
OVP
VBB
STBY_IN
CPL
CPH
CP
STBY
HWM
Gate
Drive
Control Logic
#36
L k
#10
FLAG
OutV
#9
0.10 M S AB
#1
Dir
OC&NV
Detect
Enable
6.60mm
0.50x8=4.00mm
Gate
Drive
Lock Detect
OCP
Timer
SRMD
PWM
OC&NV
Detect
PWM
&SR
Control
Logic
Decay
SYMBOL
OutW
6.60mm
0.50x8=4.00mm
FG
AINP
0.82x0.30mm
External
PWM
Internal
PWM
PWM
OSC
AINN
4.58x4.58mm
SEN
A
A2
b
D
D2
E
E2
e
k
L
COMMON DIMENSIONS
MIN
NOM
MAX
0.70
0.75
0.80
0.20 REF.
0.18
0.23
0.28
5.90
6.00
6.10
4.43
4.58
4.73
5.90
6.00
6.10
4.43
4.58
4.73
0.50 BSC.
0.25
0.32
0.42
0.52
REF
GND
GND
CPWM
CLD
AOUT
OutU
NC
OutV
NC
SEN
GND
NC
OutW
36
35
34
33
32
31
30
29
28
HWM
27
REF
HWP
26
Brake
HVM
25
Dir
24
PWM
23
Enable
HVP
HUM
HUP
22
FG
Decay
21
CPWM
SRMD
20
AINP
FLAG
19
AINN
12
13
14
15
16
STBY
GND
VBB
VBB
CP
CPH
17
18
CPL
11
AOUT
10
CLD
SI-6633M
Pin Function
Hall element input pin WHall element input pin W+
Hall element input pin VHall element input pin V+
Hall element input pin UHall element input pin U+
Current decay setting pin
Synchronous rectifier operation selection (Active or Passive)
Error detection output pin
Lock detection protection time setting pin
Standby control input pin
Device ground pin
Motor & driver power supply pin
Motor & driver power supply pin
Charge pump charge up capacitor pin
Charge pump pumping capacitor pin (High)
Charge pump pumping capacitor pin (Low)
Amplifier output & 100% ON direction input pin
Amplifier input (negative)
Amplifier input (positive)
PWM frequency setting pin
FG signal output
Lock counter reset & enable signal input pin
External PWM control logic signal input
Rotation direction setting pin
Brake input pin
Internal PWM current setting pin
Phase W output pin
No Connection
Device ground pin
Current detection input pin
Source pin
No Connection
Phase V output pin
No Connection
Phase U output pin
* Connect the GND and VBB pins to their respective power lines.
ICs
117
SI-6633C
Control IC
Features
Parameter
Supply Voltage
Output Voltage
Logic Input Voltage
Hall Input Voltage
REF Input Voltage
Detection Voltage
Maximum Junction Temperature
Storage Temperature
Operating Ambient Temperature
Package Thermal Resistance
Symbol
VBB
VOUT
VIN(Logic)
VHALL
VRef
VSENSE
Tj(max)
Tstg
Ta
R ja
Ratings
0.3 to 38
1 to 38
0.3 to 6
0.3 to 6
0.3 to 6
0.5
150
40 to 150
20 to 85
43
Unit
V
V
V
V
V
V
C
C
C
C/W
Parameter
Supply Voltage
Control Supply Voltage
Logic Input Voltage
REF Input Voltage
Hall Input Voltage
Detection Voltage
Package Temperature
Operating Ambient Temperature
Ratings
10 to 30
3 to 5.5
0 to 5.5
0.5 to 5.5
0.2 to 4
0.5
105
20 to 85
Symbol
VBB
VDD
VIN(Logic)
VRef
VHALL
VSENSE
TC
Ta
Unit
V
V
V
V
V
V
C
C
Electrical Characteristics
Parameter
Conditions
Conditions
Output Drivers
VBB Voltage Range
VBB
IBB
Control Logic
VDD Voltage Range
VDD
IDD
min.
10
50
3
100
0
VDD0.75
1
1
0.3
(100)
19
Ratings
typ.
max.
10
VBBOV
20
200
V
mA
A
During operation
Operating (output is OFF)
Standby mode
0.5
180
0.5
25
5.5
3
500
VDD0.25
VDD
1
1
0.95
32
V
mA
A
V
V
A
A
s
kHz
KHz
During operation
Operating (output is OFF)
Standby mode
Unit
Conditions
VIN(0)
VIN(1)
IIN(0)
IIN(1)
tLOGIC
fPWM
fOSC
Gate Drive
High Side Output Voltage
Low Side Output Voltage
Drive Current
Dead Time
VGS(H)
VGS(L)
IGATE
tdead
6
6
20
30
1000
9
9
60
V
V
mA
ns
Iref
VRef
ISen
VSen
5
0.5
5
VREF0.095
1
0.1
0.1
VREF0.1
2
1
5.5
1
VREF0.12
4
A
V
A
V
s
VSen=0 to 1V
VRef=1 to 5V
Design assurance level
VFI(ON)
IFI(ON)
IFI(OFF)
VOCP
tFLTOCP
NOCP_OFF
VBBOV
VBBOVhys
fLD
NLD
TJTSD
TJTSDhys
VDDUV
VDDUVhys
VBBUV
VBBUVhys
0.2
5
0
1.4
0.75
256
33
1.25
100
256
151
10
2.65
0.1
0.4
7.5
1.5
1.5
256
35
2
128
256
170
15
2.8
0.15
9
0.3
0.7
15
50
1.65
3
256
37
3.5
164
256
185
20
2.95
0.25
9.9
V
mA
A
V
s
IFG=2mA
VFI=2V
VFG=5.5V
Low-side MOSFET detection (between OUT and GND)
Design assurance level
V
V
Hz
CLD=0.1F
VFG(sat)
IFGlkg
0.2
0
0.4
0.7
50
V
A
IHALL
VCMR
VHALL
VHYS
tpulse
5
0.2
60
25
1
0.1
40
2
1
4
A
V
mVpp
mV
s
Internal PWM
REF Pin Input Current
REF Pin Input Voltage Range
SEN Pin Input Current
Detection Voltage
Current Detection Filter Time
Protection
FL Output Saturation Voltage
FL Output Pin ON Current
FL Output Leakage Current
Overcurrent Detection Voltage
Overcurrent Detection Filter Time
OCP Output OFF Timer Count
VBB Overvoltage Protection Threshold Voltage
VBB Overvoltage Protection Hysteresis
CLD Pin Oscillation Frequency
Lock Detection Timer Count
Thermal Protection Operation Temperature
Thermal Protection Hysteresis
VDD Low Voltage Protection Release Voltage
VDD Low Voltage Protection Hysteresis
VBB Low Voltage Protection Release Voltage
VBB Low Voltage Protection Hysteresis
FG
FG Output Saturation Voltage
FG Output Leakage Current
Hall Logic
Hall Input Current
Common Mode Input Voltage Range
AC Input Voltage Range
Hysteresis
Pulse Removal Filter
tLPFSen
VHALL
4
C
C
V
V
V
V
*: Use typ. data for design. The direction in which current flows out of the device is regarded as negative.
118
ICs
VIN(0), VIN=0V
VIN(1), VIN=5V
fin=50kHz, Duty=50%
PWM pin, Duty=50%
COSC=330pF
IFG=2mA
VFG=5.5V
VIN=0.2 to 4V
SI-6633C
(Unit : mm)
VBB=10~30V
VDD=3~5.5V
TOP VIEW
BOTTOM VIEW
x2
VCP
VBB
VDD
0.15 S
D2
x2
0.15 S
D/2
L k
D2/2
#19
Charge Pump
CPL
A
OVP
Hall Amp
HallU
GHU
HallV
HW+
Hall
GLU
Gate Drive
#36
#9
0.10 M S AB
GHV
#1
&
SV
OCP
FL
GLV
Comm
FG
FG Gen
&
Control
Lock Detect
OSC
6.60mm
0.50x8=4.00mm
SW
Logic
SYMBOL
GLW
Dir
6.60mm
0.50x8=4.00mm
Controller
#10
SU
TSD
HallW
HW-
L k
HV-
E2/2
UVLO
HV+
Hall
#28
E2
HU-
#18
HU+
Hall
#27
CPH
E/2
Drv.Reg
Int.Reg
Sen
Enable
Brake
10
PWM
Decay
0.82x0.30mm
Ref
GND
COSC
CLD
4.58x4.58mm
A
A2
b
D
D2
E
E2
e
k
L
COMMON DIMENSIONS
MIN
NOM
MAX
0.70
0.75
0.80
0.20 REF.
0.18
0.23
0.28
5.90
6.00
6.10
4.43
4.58
4.73
5.90
6.00
6.10
4.43
4.58
4.73
0.50 BSC.
0.25
0.32
0.42
0.52
GND
Ena
Break
FL
FG
VDD
COSC
CLD
GND
36
35
34
33
32
31
30
29
28
PWM
27
HU-
Dir
26
HU+
Decay
25
HV-
GND
24
HV+
CPL
23
HW-
CPH
22
HW+
VBB
21
REF
VCP
20
SEN
GND
19
GND
10
11
12
13
14
15
16
17
18
SW
GHW
GLW
SV
GHV
GLV
SU
GHU
GLU
SI-6633C
Pin Function
PWM signal input pin
Current direction switch pin
Decay signal input pin
Ground pin
Charge pump pumping capacitor pin (Low)
Charge pump pumping capacitor pin (High)
Motor supply input pin
Charge pump charge up capacitor pin
Ground pin
Output pin OUTW
High side gate output pin W
Low side gate output pin W
Output pin OUTV
High side gate output pin V
Low side gate output pin V
Output pin OUTU
High side gate output pin U
Low side gate output pin U
Ground pin
Current detection pin
Internal PWM current setting pin
Hall element input pin HW+
Hall element input pin HW
Hall element input pin HV+
Hall element input pin HV
Hall element input pin HU+
Hall element input pin HU
Ground pin
Lock detection time setting pin
Switching frequency setting pin
Logic supply pin
FG output pin
Error detection output pin
Brake input pin
Lock counter reset signal & enable signal input pin
Ground pin
* Connect the GND and VBB pins to their respective power lines.
ICs
119
SX68000MH Series Surface-Mount, Built-in Overcurrent Protection, Thermal Shutdown, and Overcurrent Limiting Circuits
Features
Parameter
Symbol
(Ta=25C)
Ratings
SX68002MH
500
20
20
1.5
2.25
0.5 to +7
15
41.7
20 to +100
+150
40 to +150
SX68001MH
250
20
20
2.0
3.0
0.5 to +7
15
41.7
20 to +100
+150
40 to +150
SX68003MH
500
20
20
2.5
3.75
0.5 to +7
15
41.7
20 to +100
+150
40 to +150
Unit
V
V
V
A
A
V
C/W
C/W
C
C
C
Conditions
Vcc=15V,VIN=0V
Between VCC and COM
Between VB and HS (U, V, W)
PW100s, duty=1%
*1
*1
*1: When mounted on a board (1.6 mm, 35m copper layer, CEM-3, moldless, natural air cooling)
Symbol
min.
13.5
1.5
0.5
VBB
Vcc
tdead
SX68001MH
typ.
150
max.
200
16.5
min.
13.5
1.5
0.5
Ratings
SX68002MH
typ.
max.
300
400
16.5
min.
13.5
1.5
0.5
SX68003MH
typ.
300
Unit
max.
400
16.5
V
V
s
s
Conditions
Between VBB and LS
Between VCC and COM
Electrical Characteristics
Parameter
Icc
Ibs
VIH
VIL
VH
IIH
UVHL
UVHH
UVLL
UVLH
VFOL
VFOH
VOCLL
VOCLH
VLIM
VTRIP
tp
tbk(ocp)
tbk(ocl)
TDH
TDL
TDhys
VREG
VDSS
min.
1.0
9.0
9.5
10.0
10.5
4.8
4.5
0.6175
0.9
20
135
105
6.75
250
SX68001MH
typ.
4.6
140
2.0
1.5
0.5
230
0.65
1.0
25
2
3.3
150
120
30
7.5
max.
8.5
400
2.5
500
11.0
11.5
12.0
12.5
0.5
0.5
5.5
0.6825
1.1
165
135
8.25
min.
1.0
9.0
9.5
10.0
10.5
4.8
4.5
0.6175
0.9
20
135
105
6.75
500
IDSS
100
1.25
1.5
VSD
1.1
1.5
IIB
VFB
RBD
td(on)
tr
trr
td(off)
tf
td(on)
tr
trr
td(off)
tf
1.0
60
800
45
75
720
40
750
50
70
660
20
10
1.3
120
ICs
Symbol
(Ta=25C)
Ratings
SX68002MH
typ.
max.
4.6
8.5
140
400
2.0
2.5
1.5
0.5
230
500
11.0
11.5
12.0
12.5
0.5
0.5
5.5
0.65
0.6825
1.0
1.1
25
3.3
150
165
120
135
30
7.5
8.25
4.5
0.6175
0.9
20
135
105
6.75
500
SX68003MH
typ.
4.6
140
2.0
1.5
0.5
230
0.65
1.0
25
2
3.3
150
120
30
7.5
max.
8.5
400
2.5
500
11.0
11.5
12.0
12.5
0.5
0.5
5.5
0.6825
1.1
165
135
8.25
100
100
3.2
4.0
2.0
2.4
1.0
1.5
1.0
1.5
1.0
60
810
60
120
815
40
760
60
110
750
30
10
1.3
1.0
60
940
100
135
975
45
900
105
135
905
35
10
1.3
A
V
min.
1.0
9.0
9.5
10.0
10.5
4.8
Unit
mA
A
Conditions
V
A
Vcc1,2=15V, IREG=0A
VBHS=15V, HIN=5V, per phase, TC=20C to 125C
Vcc=15V, Output:ON
Vcc=15V, Output:OFF
Vcc=15V
Vcc=15V, VIN=5V
Vcc=15V
V
V
s
s
s
Vcc=15V
Vcc=15V
Vcc=15V
Vcc=15V
Vcc=15V
Vcc=15V
V
V
IREG=35mA
Vcc=15V, ID=100A, VIN=0V
Vcc=15V, VDS=500V (250 V for
SX68001MH),VIN=0V
Vcc=15V, ID=1A(0.75 A for SX68002MH
or 1.25 A for SX68003MH), VIN=5V
Vcc=15V, ISD=1A(0.75 A for SX68002MH
or 1.25 A for SX68003MH), VIN=0V
VR=500V(250 V for SX68001MH)
IF=0.15A
ns
V DC =300V(150V for SX68001MH),
Vcc=15V, ID=1A(0.75 A for SX68002MH
or 1.25 A for SX68003MH), VIN=0 to 5V,
Inductive load
ns
SX68000MH Series
VB2
VB32
VB31
VCC1
VBB1
VBB2
UVLO
HIN1
HIN2
HIN3
UVLO
Input
Logic
UVLO
UVLO
High Side
Level Shift Drive
W1
W2
V
COM1
SD
V1
V2
VCC2
UVLO
REG
REG
LIN1
Input Logic
(OCP reset)
LIN2
LIN3
COM2
Thermal
Shutdown
OCP
OCP & OCL
FO
LS
OCL
VB1
VB2
VB32
VB31
15V
VCC1
VBB1
VBB2
UVLO
UVLO
UVLO
UVLO
Control IC
HIN1
HIN2
Input
Logic
HIN3
W1
W2
V
V1
V2
U
COM1
SD
VCC2
REG
LIN1
LIN2
LIN3
5V
High Side
Level Shift Drive
REG
BLDCM
UVLO
Input Logic
(OCP reset)
COM2
FO
Thermal
Shutdown
OCP
LS
OCL
(Unit : mm)
22 0.2
(Including the resin burr)
0.25 +0.15
0.05
0.4 +0.15
0.05
14.1 0.3
27
11.4 0.2
(Excluding the resin burr)
18
17
1.20.2
2.1 0.2
1.050.2
ICs
121
Parameter
Symbol
Conditions
SMA6822MH
SMA6823MH
250
500
500
Vcc=15V,VIN=0V
Vcc
20
20
20
VBS
20
20
20
Io
2.0
1.5
2.5
Iop
2.25
3.75
IREG
35
35
35
mA
VIN
0.5 to +7
0.5 to +7
0.5 to +7
jc
4.46
4.46
4.46
C/W
ja
31.25
31.25
31.25
C/W
Top
20 to +100
20 to +100
20 to +100
Tch
+150
+150
+150
Storage Temperature
Tstg
40 to +150
40 to +150
40 to +150
Input Voltage
Thermal Resistance (Junction to Case)
Unit
SMA6821MH
VDSS
(Ta=25C)
Ratings
PW 100s, duty=1%
Symbol
SMA6821MH
min.
typ.
SMA6822MH
max.
min.
typ.
SMA6823MH
max.
min.
typ.
Unit
Conditions
max.
VBB
140
200
300
400
300
400
Vcc
13.5
16.5
13.5
16.5
13.5
16.5
tdead
1.5
1.5
1.5
tw
0.5
0.5
0.5
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Control Supply Current
Symbol
SMA6821MH
min.
typ.
SMA6822MH
max.
min.
typ.
SMA6823MH
max.
min.
typ.
Unit
Icc
VIH
2.5
2.5
2.5
VIL
1.5
1.5
1.5
IIH
50
100
50
100
50
100
IIL
UVHL
9.0
10.0
11.0
9.0
10.0
11.0
9.0
10.0
11.0
(high side)
UVHH
9.5
10.5
11.5
9.5
10.5
11.5
9.5
10.5
11.5
UVLL
10.0
11.0
12.0
10.0
11.0
12.0
10.0
11.0
12.0
(low side)
UVLH
10.5
11.5
12.5
10.5
11.5
12.5
10.5
11.5
12.5
VFOL
1.0
1.0
1.0
Input Voltage
Input Current
Conditions
max.
mA
V
A
Vcc=15V
Vcc=15V, Output:ON
Vcc=15V, Output:OFF
Vcc=15V, VIN=5V
Vcc=15V, VIN=0V
Vcc=15V
Vcc=15V
VFOH
4.0
5.5
4.0
5.5
4.0
5.5
TDH
135
150
165
135
150
165
135
150
165
TDL
105
120
135
105
120
135
105
120
135
VREG
7.5
7.5
7.5
IREG=35mA
VFB
1.1
1.3
1.1
1.3
1.1
1.3
IF=0.15A
RBD
22
22
22
VDSS
250
500
500
IDSS
100
100
100
MOSFET DC On Resistance
RDS(ON)
1.25
1.5
3.6
4.0
2.0
2.4
VSD
1.1
1.5
1.1
1.5
1.1
1.5
td(on)
430
485
665
tr
55
85
145
122
ICs
trr
90
120
150
td(off)
355
420
545
tf
20
30
40
td(on)
405
520
720
tr
60
100
175
trr
90
120
150
td(off)
395
485
605
tf
20
25
45
ns
V BB= 3 0 0 V ( 1 5 0 V f o r S M A 6 8 2 1 M H ) ,
Vcc=15V, I D=1A (0.75A for SMA6822MH,
1.25A for SMA6823MH), 0VVIN5V
Inductive load
ns
SMA6820MH Series
4
11
10
3
5
HO1
24
HS1
VB1
VB2
VB3
HO2
VD
VBB1
8
7
VCC1
VBB2
UVLO
UVLO
UVLO
UVLO
13
HS2
HIN2
HIN3
HO3
COM3
HS3
12
14
HVIC
HIN1
HIN2
HIN3
Input
Logic
High Side
Level Shift Driver
23
VCC2
COM1
UVLO
Thermal
Detect
MCU
7.5V
Reg.
LO1
U
V
W1
W2
VCC2
VREG
20
LIN1
19
LIN1
LIN2
LIN3
Input
Logic
HIN1
Low Side
Driver
18
16
LO2
17
LIN2
LIN3
LO3
VREG
15
LS2
COM2
LS1
22
FO
21
FO
COM2
LVIC
15V
The input pulldown resistor is built into an IC (about 100 k). If the input
is expected to be unstable or fluctuate widely, however, it needs to be
reinforced with an external resistor.
Attach capacitors near IC. Attach a ceramic capacitor in parallel with the
electrolytic capacitor if too much noise is generated.
(Unit : mm)
1.20.1
9.5 +0.7
0.5
0.6 +0.15
0.05
23 X P1.270.5=29.210.6
(Measured at the tip)
31.30.2
R1
)
(4.5)
R-end
(Measured at the tip)
4-(
50.5
40.2
10.20.2
310.2
0.5 +0.15
0.05
4.50.5
(Measured at the tip)
3
2
Forming No.2451
5
4
7
6
9
8
11 13 15 17 19 21 23
10 12 14 16 18 20 22 24
Forming No.2452
Product Mass : Approx.3.9g
ICs
123
SMA6860MZ Series
Features
Parameter
Symbol
SMA6862MZ
(Ta=25C)
Ratings
SMA6863MZ
500
20
20
2.5
3.75
0.5 to +7
4.46
31.25
20 to +100
150
40 to +150
1.5
2.25
SMA6865MZ
2.5
3.75
Unit
Conditions
V
V
V
A
A
V
C/W
C/W
C
C
C
Symbol
min.
13.5
33
1
3.3
1
3.3
1
1.5
0.5
VBB
VCC
RR
CC
RL
CL
Rup2
CSD2
tdead
Tw
SMA6862MZ
typ.
300
max.
400
16.5
390
4.7
10
10
10
10
min.
13.5
33
1
3.3
1
3.3
1
1.5
0.5
Ratings
SMA6863MZ
typ.
max.
300
400
16.5
390
4.7
10
10
10
10
min.
13.5
33
1
3.3
1
3.3
1
1.5
0.5
SMA6865MZ
typ.
max.
300
400
16.5
390
4.7
10
10
10
10
Unit
V
V
k
nF
k
nF
k
nF
s
s
Conditions
Between VBB and LS
Between VCC and COM
VRC=5V
VRC=5V
VL=5V
VL=5V
Vup2=5V
Vup2=5V
Tj=20C to +150C
Electrical Characteristics
(Ta=25C)
min.
1.6
9.0
9.5
10.0
10.5
120
100
500
SMA6862MZ
typ.
4.2
135
2.9
2.1
10.0
10.5
11.0
11.5
135
115
1.0
0.53
2
0.8
210
max.
7
380
3.4
11.0
11.5
12.0
12.5
150
130
10
1.3
100
min.
1.6
9.0
9.5
10.0
10.5
120
100
500
Ratings
SMA6863MZ
typ.
4.2
135
2.9
2.1
10.0
10.5
11.0
11.5
135
115
1.0
0.53
2
0.8
210
3.6
4.0
2.0
2.4
1.1
1.5
1.1
1.5
1.0
1.5
720
60
110
690
30
670
70
120
590
30
820
100
120
740
30
790
110
130
700
30
750
60
100
680
20
640
65
100
560
20
Parameter
Control Supply Current
Boot Supply Current
Input Voltage
Undervoltage Lock Out
Undervoltage Lock Out
Termal Protection and
Release Threshold
Overcurrent Protection Trip Voltage
Current Limiting Reference Voltage
Overcurrent Protection Retention Time
Boot Diode Leakage Current
Boot Diode Forward Voltage
Boot Diode Series Resistance
MOSFET Output Breakdown Voltage
MOSFET Output Leakage Current
Symbol
Icc
IB
VIH
VIL
UVHL
UVHH
UVLL
UVLH
TDH
TDL
VTRIP
VLIM
tp
ILBD
VFB
RBD
VDSS
IDSS
VSD
td(on)
r
High Side Switching Time rr
td(off)
f
td(on)
r
Low Side Switching Time rr
td(off)
f
124
ICs
max.
7
380
3.4
11.0
11.5
12.0
12.5
150
130
10
1.3
100
min.
1.6
9.0
9.5
10.0
10.5
120
100
500
SMA6865MZ
typ.
4.2
135
2.9
2.1
10.0
10.5
11.0
11.5
135
115
1.0
0.53
2
0.8
210
max.
7
380
3.4
11.0
11.5
12.0
12.5
150
130
10
1.3
100
Unit
1.4
1.7
mA
A
Conditions
Vcc=15V
VB=15V, HIN=5V
VCC=15V
VCC=15V
V
V
ms
A
V
V
A
VCC=15V
VCC=15V
VRC=5V, RR=360k, CC=0.0047F
VR=500V
IF=0.05A
VCC=15V, ID=100A, VIN=0V
VCC=15V, VDS=500V, VIN=0V
VCC=15V, ID=1.25A
(0.75A for the SMA6862MZ), VIN=5V
VCC=15V, ISD=1.25A
(0.75A for the SMA6862MZ), VIN=0V
ns
VBB=300V, VCC=15V, ID=1.5A
(2.5A for the SMA6863MZ and SMA6865MZ),
VIN=0 to 5V
Inductive load
ns
SMA6860MZ Series
(Unit : mm)
50.5
1.20.1
(Measured at the root)
9.5 +0.7
0.5
10.20.2
23 X P1.270.5=29.210.6
(Measured at the tip)
31.30.2
(Including the resin burr)
3
2
5
4
7
6
9
8
R1
0.6 +0.15
0.05
(4.5)
R-end
(Measured at the tip)
Forming No.2451
40.2
4-(
310.2
0.5 +0.15
0.05
4.50.5
(Measured at the tip)
11 13 15 17 19 21 23
10 12 14 16 18 20 22 24
Forming No.2452
Product Mass: Approx. 3.9 g
ICs
125
SLA6860MZ Series
Features
Parameter
Symbol
VDSS
Vcc
VBS
Io
Iop
VIN
(Ta=25C)
Ratings
SLA6868MZ
SLA6870MZ
500
20
20
Unit
Conditions
0.5 to +7
V
V
V
A
A
V
3.8
C/W
j-a
25
C/W
Tc
Tj
Tstg
20 to +100
150
40 to +150
C
C
C
2.5
3.75
3.0
4.5
j-c
Symbol
VBB
Vcc
RR
CC
RL
CL
Rup2
CSD2
tdead
Tw
min.
13.5
33
1
3.3
1
3.3
1
1.5
0.5
SLA6868MZ
typ.
300
max.
400
16.5
390
4.7
10
10
10
10
min.
13.5
33
1
3.3
1
3.3
1
1.5
0.5
SLA6870MZ
typ.
300
Unit
max.
400
16.5
390
4.7
10
10
10
10
V
V
k
nF
k
nF
k
nF
s
s
Conditions
Between VBB and LS
Between VCC and COM
VRC=5V
VRC=5V
VL=5V
VL=5V
Vup2=5V
Vup2=5V
Tj=20C to +150C
Electrical Characteristics
(Ta=25C)
Ratings
Parameter
Icc
IB
VIH
VIL
UVHL
UVHH
UVLL
UVLH
TDH
TDL
VTRIP
VLIM
tp
ILBD
VFB
RBD
VDSS
IDSS
min.
1.6
9.0
9.5
10.0
10.5
120
100
500
SLA6868MZ
typ.
4.2
135
2.9
2.1
10.0
10.5
11.0
11.5
135
115
1.0
0.53
2
0.8
210
max.
7
380
3.4
11.0
11.5
12.0
12.5
150
130
10
1.3
100
min.
1.6
9.0
9.5
10.0
10.5
120
100
500
SLA6870MZ
typ.
4.2
135
2.9
2.1
10.0
10.5
11.0
11.5
135
115
1.0
0.53
2
0.8
210
max.
7
380
3.4
11.0
11.5
12.0
12.5
150
130
10
1.3
100
MOSFET DC ON Resistance
RDS(ON)
2.0
2.4
1.4
1.7
VSD
1.1
1.5
1.0
1.5
td(on)
tr
trr
td(off)
tf
td(on)
tr
trr
td(off)
tf
820
100
120
740
30
790
110
130
700
30
755
65
100
680
15
645
70
105
560
20
126
ICs
Symbol
Unit
mA
A
Conditions
Vcc=15V
VB=15V, HIN=5V
Vcc=15V
Vcc=15V
V
V
ms
A
V
V
A
Vcc=15V
Vcc=15V
VRC=5V, RR=360k, CC=0.0047F
VR=500V
IF=0.05A
Vcc=15V, ID=100A, VIN=0V
Vcc=15V, VDS=500V, VIN=0V
Vcc=15V, ID=1.25A (1.5A for SLA6870MZ),
VIN=5V
Vcc=15V, ID=1.25A (1.5A for SLA6870MZ),
VIN=0V
ns
VBB=300V, Vcc=15V, ID=2.5A
(3.0A for SLA6870MZ),
VIN=0 to 5V Inductive load
ns
SLA6860MZ Series
(Unit : mm)
310.2
4.80.2
24.40.2
1.70.1
16.40.2
3.20.15 X 3.8
310.2
24.40.2
4.80.2
3.20.15
4
3
6
5
8
7
10
9
9.90.1
2.20.6
160.2
9.5 +0.7
0.5
0.50.1
2.20.6
+0.2
0.6 0.1
23xP1.270.2=29.210.5
4.50.7
(Measured at the tip)
2.450.1
0.5 +0.15
0.05
(4.4)
31.30.2
(Including the resin burr)
(4.5)
(10.5)
0.6 +0.15
0.05
23 X P1.270.7=29.211
12.90.2
2.450.2
(Measured at the root)
4-(R1)
R-end
1.70.1
3.20.15x3.8
3.20.15
50.5
160.2
12.90.2
9.90.2
16.40.2
30.3
12 14 16 18 20 22 24
11 13 15 17 19 21 23
Forming No.2171
Forming No.2175
ICs
127
SIM6800M Series Overcurrent Protection, Thermal Shutdown, Built-in Current Limiting Function, 3 Shunt Support, DIP Package
Features
Parameter
Symbol
(Ta=25C)
Ratings
SIM6812M SIM6822M
SIM6811M
SIM6827M
Unit
Conditions
4.2
4.2
All elements operating
Thermal Resistance MOSFET or IGBT
ja
25
25
25
25
All elements operating
C/W
(Junction to Ambient Air) FRD
ja_FRD
29
29
All elements operating
Operating Case Temperature
Top
20 to +100 20 to +100 20 to +100 20 to +100 C
Junction Temperature (Power part)
Tch
+150
+150
+150
+150
C
40 to +150 40 to +150 40 to +150 40 to +150 C
Storage Temperature
Tstg
Ratings
Parameter
Symbol
SIM6811M
SIM6812M
SIM6822M
SIM6827M
min. typ. max. min. typ. max. min. typ. max. min.
VBB
400
VCC
13.5
15
tdead
tw
Cboot
RFO
CFO
1.5
0.5
1
3.3
0.001
400
16.5 13.5
15
1.5
0.5
1
10
3.3
0.01 0.001
400
16.5 13.5
15
1.5
0.5
1
10
3.3
0.01 0.001
Unit Conditions
typ. max.
400
16.5 13.5
15
16.5
1.5
0.5
1
10
3.3
0.01 0.001
10
0.01
s
s
F
k
F
Electrical Characteristics
Between VBB
and LS
Between VCC
and COM
(Ta=25C)
Ratings
Parameter
Control Supply Current
Boot Supply Current
Input Voltage
FO Input Threshold Voltage
Input Current
Undervoltage Lock Out (high side)
Undervoltage Lock Out (low side)
FO Pin Output Voltage
OCL Pin Output Voltage
Current Limiting Reference Voltage
Overcurrent Protection Trip Voltage
Overcurrent Protection Retention Time
OCP Blanking Time
OCL Blanking Time
Terminal Protection and
Release Threshold
Boot Diode Forward Voltage
Boot Diode Series Resistance
MOSFET Output Breakdown Voltage
IGBT Output Breakdown Voltage
MOSFET Output Leakage Current
IGBT Output Leakage Current
MOSFET DC ON Resistance
IGBT Output Saturation Voltage
Diode Forward Voltage
128
ICs
Symbol
SIM6811M
SIM6812M
SIM6822M
SIM6827M
Unit
min.
typ.
max.
min.
typ.
max. min.
typ.
max.
min.
typ.
max.
ICC
IB
VIH
VIL
VIH
VIL
IIH
IIL
UVHL
UVHH
UVLL
UVLH
VFOL
VFOH
VOCLL
VOCLH
VLIM
VTRIP
Tp
Tbk(OCP)
Tbk(OCL)
TDH
TDL
VFB
RBD
VDSS
VCES
IDSS
ICES
RDS(ON)
VCE(sat)
9.0
9.5
10.0
10.5
0
4.8
0
4.5
135
105
500
3.2
140
2
1.5
2
1.5
230
10.0
10.5
11.0
11.5
0.65
1.0
25
2.0
2.0
150
120
1.0
60
3.2
4.5
400
2.5
2.5
500
2
11.0
11.5
12.0
12.5
0.5
0.5
5.5
165
135
1.3
100
4.0
9.0
9.5
10.0
10.5
0
4.8
0
4.5
135
105
500
3.2
140
2
1.5
2
1.5
230
10.0
10.5
11.0
11.5
0.65
1.0
25
2.0
2.0
150
120
1.0
60
2.0
4.5
400
2.5
2.5
500
2
11.0
11.5
12.0
12.5
0.5
0.5
5.5
165
135
1.3
100
2.4
9.0
9.5
10.0
10.5
0
4.8
0
4.5
135
105
600
3.2
140
2
1.5
2
1.5
230
10.0
10.5
11.0
11.5
0.65
1.0
25
2.0
2.0
150
120
1.0
60
1.75
4.5
400
2.5
2.5
500
2
11.0
11.5
12.0
12.5
0.5
0.5
5.5
165
135
1.3
2.2
9.0
9.5
10.0
10.5
0
4.8
0
4.5
135
105
600
3.2
140
2
1.5
2
1.5
230
10.0
10.5
11.0
11.5
0.65
1.0
25
2.0
2.0
150
120
1.0
60
1.75
4.5
400
2.5
2.5
500
2
11.0
11.5
12.0
12.5
0.5
0.5
5.5
165
135
1.3
2.2
VSD
1.0
1.5
1.0
1.5
2.0
2.4
2.0
2.4
td(on)
tr
trr
td(off)
tf
td(on)
tr
trr
td(off)
tf
770
70
150
690
30
690
90
150
650
50
910
100
140
700
40
875
110
155
775
35
740
70
80
570
100
690
100
80
540
100
1030
180
100
590
150
1030
240
100
540
150
mA
A
V
V
A
Conditions
VCC=15V
VB=15V, HIN=5V, per phase
VCC=15V, Output:ON
VCC=15V, Output:OFF
VCC=15V, Fo:Passive
VCC=15V, Fo:Active
VCC=15V, VIN=5V
VCC=15V, VIN=0V
VCC=15V
V
V
s
s
s
VCC=15V
VCC=15V
VCC=15V
VCC=15V
VCC=15V
VCC=15V, No FIN
V
V
A
mA
IF=0.15A
VCC=15V, ID=100A, VIN=0V
VCC=15V, ICE=1mA, VIN=0V
VCC=15V, VDS=500V, VIN=0V
VCC=15V, VCE=600V, VIN=0V
VCC=15V, ID=1.0A (1.25A for the SIM6812M), VIN=5V
VCC=15V, IC=5.0A, VIN=5V
VCC=15V, ISD=1.0A (1.25A for the SIM6812M,
IEC=5A for the SIM6822M, 27M), VIN=0V
ns
VBB=300V, VCC=15V,ID=1.0A,
(1.25A for the SIM6812M, IC=5A for the
SIM6822M, 27M), VIN=0 to 5V, Inductive load
ns
SIM6800M Series
VB2
VB3
VBB
VCC1
UVLO
HIN1
HIN2
HIN3
UVLO
Input
Logic
UVLO
UVLO
High Side
Level Shift Driver
W1
W2
V
V1
V2
U
COM1
SD
VCC2
UVLO
LIN1
LIN2
LIN3
Input Logic
(OCP reset)
COM2
Thermal
Shutdown
Low Side
Driver
LS1
LS2
LS3A
LS3B
OCP
FO
OCL
OCP
VB1A
VB1B
VB2
VB3
DC-link
15V
VBB
VCC1
UVLO
HIN1
HIN2
HIN3
UVLO
UVLO
Input
Logic
UVLO
High Side
Level Shift Driver
W1
W2
V
V1
V2
U
SD
Controller
VCC2
W
Brushless
V DC motor
U
UVLO
LIN1
LIN2
LIN3
5V
Input Logic
(OCP reset)
FO
LS1
LS2
LS3A
LS3B
Thermal OCP
Shutdown
OCP & OCL
OCL
CFO
Low Side
Driver
COM2
RFO
COM1
Ro
OCP
Rs
Co
COM
External Dimensions
33.7
+0.1
17.4
8.350.3 8.350.3
3.20.2
20
(0.04)
7.40.15
Pin 1 marking
1
0.42 -0.05
7.60.4
2-R1.5
21
14.80.3
(Including thick burr)
40
(4 )
1.15MAX
(Unit : mm)
1.80.1
40.2
360.3
0.52+0.1
-0.05
19xP1.7780.25=33.7820.3
ICs
129
SCM1240M Series IGBT Output Element, Built-in Thermal Shutdown, Overcurrent Protection, and Shoot Through Prevention Circuits
Features
Six IGBTs and six FRDs for the 3-phase bridge, a pre-drive IC, and a boot diode are integrated into a single package
(For SCM1248M, the 6 IGBTs and 6 FRDs are replaced with 6 MOSFETs)
Best for driving air conditioner compressors, washing machine drums, and refrigerator compressors
Built-in shoot through prevention (STP) circuit (when the ON signal is input simultaneously)
All IGBTs can be shut down when commonly connected to the FO pin.
Three built-in boot diodes with limiting resistors
Built-in undervoltage lock out (UVLO) circuit
Built-in overcurrent protection (OCP) circuit
Built-in thermal shut down (TSD) circuit
Fail signal output during operation of the UVLO (low side only), OCP, or STP circuit
Supports CMOS (3.3 and 5 V) input levels
Symbol
SCM1241M
SCM1243MF
450
500
600
20
20
10
450
500
600
20
20
15
450
500
600
20
20
20
Supply Voltage
VDC
Supply Voltage (Surge)
VDC(Surge)
IGBT Output Breakdown Voltage
VCES
MOSFET Output Breakdown Voltage
VDSS
Control Supply Voltage
VCC
Control Supply Voltage (Bootstrap)
VBS
Output Current (continuous)
Io
Output Current (pulse)
Input Voltage
Fo Pin Voltage
OCP Pin Voltage
Thermal Resistance IGBT or MOSFET
(Junction to Case) FRD
Operating Case Temperature
Junction Temperature (Power part)
Storage Temperature
Insulation Breakdown Voltage
(Ta=25)
Ratings
SCM1245MF
SCM1246MF
SCM1248M
450
500
600
20
20
30
400
450
500
20
20
5
Unit
Conditions
V
V
V
V
V
V
A
Iop
20
30
30
45
7.5
VIN
VFO
VOCP
jc_Q
jc_F
Top
Tj
Tstg
Viso
0.5 to +7.0
7
10 to +5.0
6.0
6.5
20 to +100
150
40 to +150
2,000
0.5 to +7.0
7
10 to +5.0
3.0
4.0
20 to +100
150
40 to +150
2,000
0.5 to +7.0
7
10 to +5.0
3.0
4.0
20 to +100
150
40 to +150
2,000
0.5 to +7.0
7
10 to +5.0
3.0
4.0
20 to +100
150
40 to +150
2,000
0.5 to +7.0
7
10 to +5.0
5.5
20 to +100
150
40 to +150
2,000
SCM1243MF
min. typ.
max.
Ratings
SCM1245MF
min.
typ.
max.
SCM1246MF
min.
typ. max.
SCM1248M
min.
typ.
max.
Symbol
SCM1241M
min.
typ. max.
VBB
VCC,VBS 13.5
0.5
tINmin(on)
Minimum Input Pulse Width
0.5
tINmin(off)
1.0
Input Signal Dead Time
tdead
3.0
FO Pull-up Voltage
VFO
1.0
FO Pull-up Resistance
RFO
0.001
FO Noise Eliminating Capacitor
CFO
10
Boot Capacitor
CBOOT
Shunt resistor
Rs
27
RC filter resistor
Ro
RC filter capacitor
Co
PWM Carrier Frequency
fc
130
ICs
300
15
400
16.5
5.5
22
0.01
220
100
2200
20
13.5
0.5
0.5
1.0
3.0
1.0
0.001
10
18
300
15
400
16.5 13.5
0.5
0.5
1.0
5.5
3.0
22
1.0
0.01 0.001
220
10
18
100
2200
20
300
15
400
16.5
5.5
22
0.01
220
100
2200
20
13.5
0.5
0.5
1.0
3.0
1.0
0.001
10
12
300
15
400
16.5
5.5
22
0.01
220
100
2200
20
13.5
0.5
0.5
1.0
3.0
1.0
0.001
10
67
300
15
400
16.5
5.5
22
0.01
220
100
2200
20
Unit
V
V
s
s
s
V
k
F
F
m
pF
kHz
Conditions
Between VBB and LS
Between VCC and COM
ON pulse
OFF pulse
SCM1240M Series
Electrical Characteristics
Parameter
Control Supply Current
Boot Supply Current
Input Voltage
Input Current
Undervoltage Lock Out
(high side)
Undervoltage Lock Out
(low side)
FO Pin Output Voltage
Overcurrent Protection Trip Voltage
Overcurrent Protection Retention Time
OCP Blanking Time
Thermal Protection and
Release Threshold
IGBT Output Breakdown Voltage
MOSFET Output Breakdown Voltage
IGBT Output Leakage Current
MOSFET Output Leakage Current
IGBT Output Saturation Voltage
MOSFET DC ON Resistance
Diode Forward Voltage
Boot Diode Forward Voltage
Boot Diode Series Resistance
(Ta=25)
Symbol
SCM1241M
min.
typ. max.
SCM1243MF
min. typ.
max.
Ratings
SCM1245MF
min.
typ.
max.
ICC
Ibs
VIH
VIL
IIH
UVHL
UVHH
UVLL
UVLH
VFOL
VFOH
VTRIP
tp
tbk
TDH
TDL
VCES
VDSS
ICES
IDSS
VCE(sat)
RDS(ON)
1.0
10.0
10.5
10.0
10.5
4.8
0.46
600
3
140
2.0
1.5
230
11.0
11.5
11.0
11.5
0.5
26
1.65
150
120
1.7
2.5
500
12.0
12.5
12.0
12.5
0.5
0.54
2.2
1.0
10.0
10.5
10.0
10.5
4.8
0.46
600
3
140
2.0
1.5
230
11.0
11.5
11.0
11.5
0.5
26
1.65
150
120
1.7
1.0
10.0
10.5
10.0
10.5
4.8
0.46
600
VSD
1.7
2.2
1.75
2.2
1.9
2.4
1.5
2.0
0.9
1.4
VFB
RB
td(on)
tr
trr
td(off)
tf
td(on)
tr
trr
td(off)
tf
1.1
22
590
80
60
550
90
570
100
70
560
100
1.3
1.1
22
600
70
70
620
60
600
100
80
600
70
1.3
1.1
22
695
95
75
675
55
715
135
115
670
50
1.3
1.1
22
660
110
60
700
50
660
150
70
690
50
1.3
1.1
22
820
90
130
700
20
830
90
140
710
20
1.3
2.5
500
12.0
12.5
12.0
12.5
0.5
0.54
2.2
3
140
2.0
1.5
230
11.0
11.5
11.0
11.5
0.5
26
1.65
150
120
1.7
2.5
500
12.0
12.5
12.0
12.5
0.5
0.54
2.2
SCM1246MF
min.
typ. max.
SCM1248M
min.
typ.
max.
Unit
Conditions
1.0
10.0
10.5
10.0
10.5
4.8
0.46
600
1.0
10.0
10.5
10.0
10.5
4.8
0.46
500
2.5
500
12.0
12.5
12.0
12.5
0.5
0.54
0.8
mA
A
V
s
s
VCC=15V
VCC=15V
VCC=15V
3
140
2.0
1.5
230
11.0
11.5
11.0
11.5
0.5
26
1.65
150
120
1.7
2.5
500
12.0
12.5
12.0
12.5
0.5
0.54
2.2
3
140
2.0
1.5
230
11.0
11.5
11.0
11.5
0.5
26
1.65
150
120
0.55
VCC=15V
V
V
mA
mA
V
ns
VDC=300V, VCC=15V,
Ic=ID=Io (Rated Current),
VIN=0 to 5V, Inductive load
ns
ICs
131
HS
RB
BootDi
UV
Detect
VCC
UV
Detect
FRD
HIN
Drive
Circuit
Level
Shift
Input Logic
U,V,W
LIN
STP
COM
Drive
Circuit
FO
O.C.
Protect
FRD
Thermal
Protect
LS
OCP
MIC
The internal block diagram above shows an IC other than SCM1248M.
For SCM1248M, the IGBTs and FRDs are replaced by MOSFETs.
VCC
CBOOT
CP
(7)
VB1
(8)
HS1
(31)
RB
BootDi
(6)
ZD
CP
UV
Detect
VCC1
(5)
HIN1
(3)
LIN1
(4)
COM1
(1)
FO1
UV
Detect
Level
Shift
Input Logic
STP
CBOOT
OCP1
(15)
VB2
(16)
HS2
Thermal
Protect
(33)
FRD
(28)
RB
(14)
UV
Detect
VCC2
Controller
(13)
HIN2
(11)
LIN2
(12)
COM2
(9)
UV
Detect
Level
Shift
Input Logic
STP
FO2
(10)
OCP2
(23)
VB3
(24)
HS3
(29)
Thermal
Protect
(30)
FRD
LS2
(25)
UV
Detect
VCC3
(21)
HIN3
(19)
LIN3
(20)
COM3
(17)
FO3
VBB
RB
(22)
Input Logic
UV
Detect
Level
Shift
STP
FRD
Drive
Circuit
(26)
W
Drive
Circuit
+
CS
VFO
(18)
OCP3
O.C.
Protect
Thermal
Protect
FRD
RO
CO
(27)
LS3
MIC3
A/D
CFO
DRS
COM
132
ICs
MIC2
BootDi
INT
FRD
Drive
Circuit
Drive
Circuit
O.C.
Protect
RFO
LS1
(32)
MIC1
BootDi
CBOOT
Drive
Circuit
O.C.
Protect
(2)
FRD
Drive
Circuit
RS
SCM1200M Series
(Unit : mm)
Root
(lead center)
B lead cross-section (S=9)
Without Fin
(SCM1240M)
(lead center)
(lead center)
(lead center)
Root
With Fin
(SCM1240MF)
ICs
133
Selection Guide
<AC/DC>
Non-isolated Type
Series Name
Part Number
Output
Current
LC5202D
LC5205D
LC5202S
LC5200
0.5A
LC5205S
LC5203D
LC5210D
1.0A
LC5222D
LC5225D
LC5222S
LC5220
0.5A
LC5225S
LC5223D
LC5226D
LC5555LD
1.0A
RDS(ON)
(Max)
250V
2.2
450V
6.0
250V
2.2
450V
6.0
250V
1.3
450V
3.0
250V
2.2
450V
6.0
250V
2.2
450V
6.0
250V
1.3
450V
3.0
2.5A
LC5550
4.0A
1.9
LC5511D
3.95
650V
LC5565LD
ICs
Buck/
Buck-boost
138
Buck
140
Flyback
LED downlights
LED straight tube
lamps, etc.
142
Flyback
144
DIP8
3.95
DIP8
1.9
Page
136
DIP8
SOP8
Applications
Buck
DIP8
DIP8
650V
LC5566LD
SOP8
Features
1.9
LC5560
Circuit Type
DIP8
DIP8
LC5556LD
LC5513D
Package
3.95
650V
LC5510
134
Input
Voltage
Part Number
LC5521D
MOSFET
VDSS
RDS(ON) (Max)
650V
3.95
Package
650V
1.9
LC5523F
650V
1.9
Flyback
LC5520
650V
1.1
LC5545LD
650V
3.95
LC5546LD
650V
1.9
LC5548LD
800V
3.5
LC5546LF
650V
1.9
LC5547LF
650V
1.1
LC5549LF
800V
1.7
Input Voltage
Range
Output Current
Applications
Page
LED downlights
Harmonics standard compliant
LED straight tube
(Class C)
lamps, etc.
High efficiency
146
Universal input
TO220F-7
LC5525F
Features
Power factor correction
DIP8
LC5523D
Circuit Type
Flyback
DIP8
Flyback
LC5540
TO220F-7
Flyback
Ceiling lights
Street lights,
etc.
LED downlights
LED straight tube
lamps, etc.
148
Ceiling lights
Street lights,
etc.
<DC/DC>
Series Name
LC5700
Part Number
LC5720S
8.5 to 50V
2A
Package
HSOP8
Features
Current mode PWM control
Buck, Boost, Buck-Boost operations
PWM dimming
OCP/OVP/TSD
Applications
Page
DC input LED
lighting
RGB LED lighting
ICs
150
135
Lineup
Part Number
LC5202D
LC5205D
LC5202S
LC5205S
LC5203D
LC5210D
Output Current
Input Voltage
250V
450V
250V
450V
250V
450V
0.5A
1.0A
RDS(ON) (Max)
2.2
6.0
2.2
6.0
1.3
3.0
Package
DIP8
SOP8
DIP8
Parameter
Symbol
Current*1
Io
VBB
VO(BR)
VPWM
VREF
VSEN
Output
Protection functions
Undervoltage lockout function (UVLO)
Overcurrent protection function (OCP)...Latch
shutdown
Thermal shutdown function (TSD)...Auto
restart
Power Dissipation*3
PD
Operating Ambient
Temperature
Storage Temperature
Junction Temperature
Applications
LC5202D
(Ta = 25C)
LC5202S
Ratings
LC5205D LC5205S
LC5203D LC5210D
0.5
250
250
1.0
450
450
0.3 to Vz
0.3 to +VREG+0.3
250
250
450
450
0.85
1.73
Remarks
Excluding when
tw is less than 1 s
V
V
V
V
0.3 to +4.0
1.73
Unit
0.85
1.73
Ta
40 to +105
Tstg
Tj
40 to +150
+150
C
C
Excluding when
tw is less than 1 s
Sanken
Evaluation Board
*1: The output current value may be limited, depending on the duty ratio, ambient temperature, and heating conditions. Do
not exceed the junction temperature Tj under any circumstances.
*2: There is a built-in zener diode between the PWM pin and GND. VZ is the breakdown voltage of this internal zener diode,
and VZ = 6.3V (TYP). The maximum value of the inflow current is 1mA.
*3: The power dissipation PD varies depending on the pattern layout of the circuit board used. Refer to the Ta-PD
characteristics curve.
Symbol
Supply Voltage
Output Current (Average)
REF Pin Voltage
Case Temperature*2
VBB
Io(AVG)
VREF
Tc
LC5202D/S
min.
25*1
LC5203D
max.
200
0.4
0.8
105
min.
25*1
L C5205D/S
max.
200
0.8
0.8
105
min.
25*1
LC5210D
max.
400
0.4
0.8
105
min.
25*1
Unit
max.
400
0.8
0.8
105
V
A
V
C
The recommended operating conditions show the operating conditions required to maintain normal circuit functions as shown in the electrical characteristics.
In actual operation, the device must be used within the recommended operating conditions.
*1: The minimum voltage depends on the LED used.
*2: Defined at the center of the package. The junction temperature Tj is assumed to be 150C or lower.
Electrical Characteristics
Parameter
Supply Current
Output MOSFET Breakdown Voltage
Measurement
Conditions
IBBs
IBB
VDS(BR)
ID=1mA
RDS(ON)
VF
VUVLO(ON)
VUVLO(OFF)
VREG
IREG
VREF
IREF
VSEN
VOCP
ISEN
tBLK
fPWM
tr
tf
TTSD
TTSD(HYS)
ja
ID=0.5A
ID=1.0A
ID=0.5A
ID=1.0A
IF=0.5A
IF=1.0A
IF=0.5A
IF=1.0A
IREG=0.1mA
VREG=11V
Duty=50%
Io=0.4A
Io=0.4A
Sanken Evaluation
Board
min.
250
450
11.5
0
10
VREF0.03
10
Ratings
typ.
0.8
2
1.2
0.7
3.5
1.7
0.8
0.75
0.8
0.88
14
13
12
VREF
3
400
20
50
150
55
For the polarity of current values, the sink is defined as "positive" and the source is defined as "negative" with respect to the IC.
*: Control IC chip temperature (Tj)
136
ICs
max.
1.2
2.2
1.3
6
3
1
1.2
0.9
1
12.5
2
1
10
VREF+0.03
10
200
72
147
Unit
mA
mA
V
V
V
V
V
V
V
V
V
mA
V
A
V
V
A
ns
kHz
ns
ns
C
C
C/W
C/W
Remarks
LC5202D/S, LC5203D
LC5205D/S, LC5210D
LC5202D/S
LC5203D
LC5205D/S
LC5210D
LC5202D/S
LC5203D
LC5205D/S
LC5210D
VBB pin voltage
VBB pin voltage
LC52xxD
LC52xxS
LC5200 Series
External Dimensions
Pin Functions
(Unit : mm)
Pin No.
Symbol LC52xxD LC52xxS
(DIP8)
(SOP8)
LC52xxD (DIP8)
9.40.3
6.50.2
REG
PWM
REF
SEN
OUT
5,6
VBB
GND
4
+0.3
1.52 -0.05
1.0 +0.3
-0.05
3.30.2
4.20.3
7.50.5
3.40.1
7.6TYP
0.25 +0.1
-0.05
2.54TYP
0~15
0.89TYP
0~15
VBB
OUT
5
4
3
REF
Ta-PD Characteristics
SEN
7
2
REG
PWM
GND
0.50.1
Function
0.080.08
0.050.05
6.20
4.40
Pin 1
marking
LC52xxS (SOP8)
Enlarged View of A
1.50
0.695 TYP
5.20
0.15
PD=1.73W
1.5
DIP
a=
72
C
/W
PD=0.85W
j-a
=14
SOP
7C
/W
0.5
25
50
0.4
1.27
j-
75
100
125
150
0.40
Block Diagram
2.70
If the pin number differs in the DIP8 and SOP8 packages, the pin number for SOP8
is indicated in parentheses.
2.90
VBB
6 (7)
Control JC
Regulator
5
(5,6) OUT
OUT
UVLO
TSD
PWM 2
VBB
OUT
6
GND
REG 1
Logic
Current
Control
REF 3
Gate Driver
REG
PWM
REF
SEN
OCP
4
SEN
8
GND
AC
INPUT
CIN
U1
REG
R1
RPWM
C1
C2
D1
VLED
LC5200
REF
R2
VBB
LED
Line
Filter
OUT
L1
RS
ICs
137
Lineup
Applications
Part Number
LC5222D
LC5225D
LC5222S
LC5225S
LC5223D
LC5226D
Output Current
Input Voltage
250V
450V
250V
450V
250V
450V
0.5A
1.0A
RDS(ON) (Max)
2.2
6.0
2.2
6.0
1.3
3.0
Package
DIP8
SOP8
DIP8
(Ta = 25C)
Ratings
Parameter
Symbol
LC5222D LC5222S LC5225D LC5225S LC5223D LC5226D
Output Current*1
Io
0.5
1.0
Main Supply Voltage
VBB
250
450
250
450
Output Breakdown Voltage VO(BR)
250
450
250
450
VPWM
0.3 to Vz
PWM Pin Voltage*2
REF Pin Voltage*2
VREF
0.3 to Vz
0.3 to +4.0
SEN Pin Voltage
VSEN
Power Dissipation*3
PD
1.73
0.85
1.73
0.85
1.73
Operating Ambient
Ta
40 to +105
Temperature
Storage Temperature
Tstg
40 to +150
Junction Temperature
Tj
+150
Unit
Remarks
A
V
V
V
V
V
W
C
C
C
*1: The output current value may be limited, depending on the duty ratio, ambient temperature, and heating conditions. Do not
exceed the junction temperature Tj under any circumstances.
*2: There is a built-in zener diode between the PWM pin and GND. VZ is the breakdown voltage of this internal zener diode, and VZ
= 6.3V (TYP). The maximum value of the inflow current is 1mA.
*3: The power dissipation PD varies depending on the pattern layout of the circuit board used. Refer to the Ta-PD characteristics curve.
Symbol
Supply Voltage
Output Current (Average)
REF Pin Voltage
Case Temperature*2
VBB
Io(AVG)
VREF
Tc
LC5222D/S
min.
25*1
0.2
LC5223D
max.
200
0.4
2.5
105
min.
25*1
0.2
L C5225D/S
max.
200
0.8
2.5
105
min.
25*1
0.2
LC5226D
max.
400
0.4
2.5
105
min.
25*1
0.2
Unit
max.
400
0.8
2.5
105
V
A
V
C
The recommended operating conditions show the operating conditions required to maintain normal circuit functions as shown in the electrical characteristics.
In actual operation, the device must be used within the recommended operating conditions.
*1: The minimum voltage depends on the LED used.
*2: Defined at the center of the package. The junction temperature Tj is assumed to be 150C or lower.
Electrical Characteristics
Symbol
Measurement
Conditions
IBBs
IBB
V(BR)DSS
ID=1mA
RDS(ON)
Parameter
Supply Current
VF
VUVLO(ON)
VUVLO(OFF)
VREG
IREG
VENB
VSLP
IREF
VSEN
VOCP
138
ICs
ISEN
VPWM(L)
VPWM(H)
IPWM
t BLK(P)
tBLK(O)
fPWM
tOff
tr
tf
TTSD
T TSD(HYS)
j-a
ID=0.5A
ID=1.0A
ID=0.5A
ID=1.0A
IF=0.5A
IF=1.0A
IF=0.5A
IF=1.0A
IREG=0mA
VREG=9V
VREF=0.2 to 2.0V
VREF=2.0 to 3.0V
VREF=0.2 to 2.0V
VREF=2.0 to 3.0V
Duty=50%
CPWM=100pF
Io=0.4A
Io=0.4A
Sanken Evaluation
Board
min.
250
450
9.6
2
2.85
10
0.4VREF0.03
0.77
10
Ratings
typ.
1
2.5
1.2
0.7
3.5
1.7
0.8
0.75
0.8
0.88
14
12
10
0.15
3
0.4VREF
0.8
0.4VREF+0.7
1.5
2
3
20
0.3
0.2
17
25
50
150
55
max.
1.5
4
2.2
1.3
6
3
1
1.2
0.9
1
10.4
0.19
10
0.4VREF+0.03
0.83
10
200
72
147
For the polarity of current values, the sink is defined as "positive" and the source is defined as "negative" with respect to the IC.
*: Control IC chip temperature (Tj)
Unit
mA
mA
V
V
V
V
V
V
V
V
V
mA
V
V
A
V
V
V
V
A
V
V
A
s
s
kHz
s
ns
ns
C
C
C/W
C/W
Remarks
LC5222D/S, LC5223D
LC5225D/S, LC5226D
LC5222D/S
LC5223D
LC5225D/S
LC5226D
LC5222D/S
LC5223D
LC5225D/S
LC5226D
VBB pin voltage
VBB pin voltage
LC522xD
LC522xS
LC5220 Series
External Dimensions
(Unit : mm)
Pin Functions
Pin No.
Symbol LC522xD LC522xS
(DIP8)
(SOP8)
LC522xD (DIP8)
9.40.3
6.50.2
Function
4
1.52 +0.3
-0.05
1.0 +0.3
-0.05
REG
PWM
REF
SEN
OUT
5,6
VBB
GND
3.30.2
4.20.3
7.50.5
3.40.1
7.6TYP
0.25 +0.1
-0.05
2.54TYP
0~15
0.89TYP
0~15
VBB
OUT
GND
0.50.1
3
REF
SEN
1
REG
PWM
Ta-PD Characteristics
0.050.05
6.20
4.40
Pin 1
marking
0.080.08
LC522xS (SOP8)
1.5
DIP
PD=0.85W
72
C
j-a
=14
7C
/W
0.5
25
50
75
100
125
150
a=
SOP
1.50
5.20
j-
/W
Enlarged View of A
0.695 TYP
PD=1.73W
Block Diagram
0.4
1.27
If the pin number differs in the DIP8 and SOP8 packages, the pin number for SOP8
is indicated in parentheses.
0.40
VBB
6 (7)
Control IC
2.70
2.90
1 REG
TSD
BandGap
Reference
PWM_IN
OUT
OUT
CC
VBB
GND
PWM 2
Reference
Control
Block
REF 3
CC_REF
Current
Detect
OCP_REF
Block
OCP
Blanking
UVLO
TSD
PWM
OCP
OPP
SLEEP
ENABLE
Logic
Block
5
(5,6) OUT
Gate Driver
4
SEN
3
REF
PWM
OC
UVLO
OPP
Logic
SEN_IN
REG
PWM
Control
Block
Regulator
SEN
8
GND
AC
INPUT
CIN
Reg
R1
C2
D1
C3
VLED
LC5220
C1
Ref
R2
VBB
LED
Line
Filter
OUT
L1
RS
ICs
139
LC5550 Series High Efficiency, High Power Factor LED Driver ICs
Features
Lineup
MOSFET
Part Number
LC5555LD
LC5556LD
*:
VDSS (MIN)
RDS(ON) (MAX)
650V
3.95
1.9
PWM Oscillation
Frequency
fOSC (TYP)
72kHz
60kHz
Maximum ON Time
tON(MAX) (TYP)
POUT*
AC230V / Universal
9.3 s
11.2 s
13W / 10W
20W / 16W
The output power values are based on the rated temperature. Output at 120 to 140% of the rated temperature is
possible for the maximum output power. Note, however, that the output power may be limited by a low output voltage
and by the ON duty specified during transformer design.
Parameter
Drain Current
IDPEAK
Protection function
Overcurrent protection (OCP)...Pulse by pulse
Overvoltage protection (OVP)...Latch shutdown
Overload protection (OLP)...Latch shutdown
Thermal shutdown (TSD)...Latch shutdown
Symbol
EAS
(Ta = 25C)
Ratings
LC5555D
2.5
47
(ILPEAK=2.0A)
LC5556D
4.0
86
(ILPEAK=2.7A)
Unit
Remarks
A
mJ
VCC
VOCP
VCOMP
VSEN
35
2.0 to +5.0
0.3 to +7.0
0.3 to +5.0
V
V
V
V
PD
0.97
Top
Tstg
Tch
55 to +125
55 to +125
150
C
C
C
Applications
LED light bulbs
LED lighting equipment
Electrical Characteristics
Parameter
min.
Ratings
typ.
max.
13.8
8.4
18
8.5
9.5
15.1
9.4
21
4.0
11
17.3
10.7
4.7
24
1.5
12.5
ISEN(SOURCE)
ISEN(SINK)
tON(LEB)
VBD(TH1)
VBD(TH2)
60
50
8.0
9.0
0.30
0.21
36
12
0.14
0.11
72
60
9.3
11.2
0.55
0.2
24
24
600
0.24
0.16
84
70
11.2
13.4
0.80
0.19
12
36
0.34
0.21
V OCP
IOCP
VBD(OVP)
VCOMP(OLP)
VCC(OVP)
Tj(TSD)
0.92
120
2.2
4.1
28.5
135
0.8
40
2.6
4.5
31.5
0.68
10
3.0
4.9
34.0
V
A
V
V
V
C
VDSS
IDSS
650
300
3.95
1.9
250
400
42
35.5
V
A
Symbol
Unit
Remarks
VCC(ON)
VCC(OFF)
ICC(ON)
VSTARTUP
ICC(STARTUP)
VCC(BIAS)
V
V
mA
V
mA
V
VCC=13V
Normal Operation
PWM Oscillation Frequency
Maximum ON Time
COMP Pin Control Lower Voltage
Error Amplifier Reference Voltage
Error Amplifier Source Current
Error Amplifier Sink Current
Leading Edge Blanking Time
Quasi-Resonant Operation Threshold Voltage 1
Quasi-Resonant Operation Threshold Voltage 2
fOSC
t ON(MAX)
VCOMP(MIN)
VSEN(TH)
kHz
LC5555LD
LC5556LD
LC5555LD
LC5556LD
V
V
A
A
ns
V
V
Protection Operation
Overcurrent Detection Threshold Voltage
OCP Pin Outflow Current
OCP Pin OVP Threshold Voltage
OLP Threshold Voltage
VCC Pin OVP Threshold Voltage
TSD Operating Temperature
MOSFET
Drain-Source Voltage
Drain Leakage Current
ON Resistance
RDS(ON)
Switching Time
tf
Thermal Resistance
ch-c
For the polarity of current values, the sink is defined as "positive" and the source is defined as "negative" with respect to the IC.
140
ICs
ns
C/W
LC5555D
LC5556D
LC5555D
LC5556D
LC5555D
LC5556D
LC5550 Series
Pin Functions
(Unit : mm)
Pin No.
1
2
9.40.3
5
6.50.2
4
1.52 +0.3
-0.05
1
+0.3
1.0 -0.05
*:
OCP
4
5
6
7
8
COMP
NF
ISENSE
D/ST
Function
MOSFET source and GND for control
Control circuit power input and Overvoltage protection signal input
Overcurrent protection and Quasi-resonant signal input and
Overvoltage protection signal input
Feedback phase compensation
(No function*)
Feedback current detection
(Pin removed)
MOSFET drain and Startup current input
NF (pin 5) connects to the stable potential S/GND pattern (pin 1 potential) via the
shortest distance for stable operation.
7.6TYP
Block Diagram
3.30.2
4.20.3
7.50.5
3.40.1
Symbol
S/GND
Vcc
VCC
2
0.25 +0.1
-0.05
2.54TYP
0~15
0.89TYP
8 D/ST
STARTUP
0~15
TSD
0.50.1
UVLO
Reg
Drv
ISENSE
NF
D/ST
Bias
OVP
1 S/GND
S
R Q
OCP 3
6 ISENSE
Bottom
Detection
OSC
OLP
OCP
2
VCC
COMP
1
S/GND
OTA
NF 5
OCP
LEB
Reg
Feedback
Control
4 COMP
Reg
D6
R2
U1
Control
NF
5 LC5550LD 4
6
ISENSE
D3
D4
D1
OCP/BD
V
2 CC
D/ST
VAC
COMP
S/GND
C3
C4 C5
R5
C6
C2
R4
R3
D2
T1
R6
C1
LED
C7
D5
D6
R2
U1
NF
6
ISENSE
D3
D4
Control
5 LC5550LD 4
D/ST
8
VAC
D1
COMP
D7
OCP/BD
VCC
C3
S/GND
C4 C5
R5
C6
C1
R7
C8
C2
R3
D2
D8
R4
T1
CV
D5
R6
LED
C7
ICs
141
LC5510 Series LED Driver ICs with Harmonics Standard (ICE61000-3-2 Class C) at all load condition
Features
Lineup
Non-isolated type
MOSFET
Part Number
VDSS (MIN)
LC5511D
LC5513D
*:
POUT*
AC230V / Universal
RDS(ON) (MAX)
3.95
1.9
650V
13W / 10W
20W / 16W
The output power values are based on the rated temperature. Output at 120 to 140% of the rated temperature is
possible for the maximum output power. Note, however, that the output power may be limited by a low output voltage
and by the ON duty specified during transformer design.
Parameter
Drain Current
IDPEAK
Symbol
EAS
(Ta = 25C)
Ratings
LC5511D
2.5
47
(ILPEAK=2.0A)
LC5513D
4.0
86
(ILPEAK=2.7A)
Unit
A
mJ
VCC
VOCP
VCOMP
VSEN
35
2.0 to +5.0
0.3 to +7.0
0.3 to +5.0
V
V
V
V
PD
0.97
Top
Tstg
Tch
55 to +125
55 to +125
150
C
C
C
Remarks
Single Pulse
Single Pulse, VDD=99V, L=20mH
Applications
LED light bulbs
LED lighting equipment
Electrical Characteristics
Parameter
min.
Ratings
typ.
max.
13.8
8.4
42
5.5
9.5
14.4
15.1
9.4
57
3.0
11
16.6
17.3
10.7
3.7
72
1.0
12.5
18.8
V
V
mA
V
mA
V
V
ISEN(SOURCE)
ISEN(SINK)
tON(LEB)
VBD(TH1)
VBD(TH2)
11.0
30.0
0.55
0.27
11
3
0.14
0.12
14.0
40.0
0.90
0.30
7
7
500
0.24
0.17
18.0
50.0
1.25
0.33
3
11
0.34
0.22
kHz
s
V
V
A
A
ns
V
V
VOCP
IOCP
VBD(OVP)
VCOMP(OLP)
VCC(OVP)
Tj(TSD)
0.66
120
2.2
4.1
28.5
135
0.60
40
2.6
4.5
31.5
0.54
10
3.0
4.9
34.0
V
A
V
V
V
C
VDSS
IDSS
650
300
3.95
1.9
250
400
42
35.5
V
A
Symbol
Unit
Remarks
VCC(ON)
VCC(OFF)
ICC(ON)
VSTARTUP
ICC(STARTUP)
VCC(BIAS) 1
VCC(BIAS) 2
VCC=13V
Normal Operation
PWM Oscillation Frequency
Maximum ON Time
COMP Pin Control Lower Voltage
Error Amplifier Reference Voltage
Error Amplifier Source Current
Error Amplifier Sink Current
Leading Edge Blanking Time
Quasi-Resonant Operation Threshold Voltage 1
Quasi-Resonant Operation Threshold Voltage 2
fOSC
t ON(MAX)
VCOMP(MIN)
VSEN(TH)
Protection Operation
Overcurrent Detection Threshold Voltage
OCP Pin Outflow Current
OCP Pin OVP Threshold Voltage
OLP Threshold Voltage
VCC Pin OVP Threshold Voltage
TSD Operating Temperature
MOSFET
Drain-Source Voltage
Drain Leakage Current
ON Resistance
RDS(ON)
Switching Time
tf
Thermal Resistance*2
ch-c
ns
C/W
LC5511D
LC5513D
LC5511D
LC5513D
LC5511D
LC5513D
For the polarity of current values, the sink is defined as "positive" and the source is defined as "negative" with respect to the IC.
*1: The relationship VCC(BIAS)1 > VCC(OFF) holds true for all products.
*2: Thermal resistance between the MOSFET channel and the case. The case temperature TC is determined by the temperature at the center of the marking surface.
142
ICs
LC5510 Series
Pin Functions
(Unit : mm)
Pin No.
1
2
9.40.3
5
6.50.2
*:
4
1.52 +0.3
-0.05
1.0 +0.3
-0.05
OCP
4
5
6
7
8
COMP
NF
ISENSE
D/ST
Function
MOSFET source and GND for control
Control circuit power input and Overvoltage protection signal input
Overcurrent protection and Quasi-resonant signal input and
Overvoltage protection signal input
Feedback phase compensation
(No function*)
Feedback current detection and Overvoltage protection signal input
(Pin removed)
MOSFET drain and Startup current input
NF (pin 5) connects to the stable potential S/GND pattern (pin 1 potential) via the
shortest distance for stable operation.
Block Diagram
7.6TYP
4.20.3
7.50.5
3.40.1
Symbol
S/GND
Vcc
3.30.2
VCC
2
0.25 +0.1
-0.05
2.54TYP
0~15
0.89TYP
8 D/ST
STARTUP
0~15
TSD
0.50.1
UVLO
Reg
Drv
ISENSE
NF
5
OVP
D/ST
Bias
1 S/GND
S
R Q
OCP 3
S/GND
VCC
OCP
COMP
Bottom
Detection
NF 5
OCP
OSC
OLP
6 ISENSE
OTA
LEB
Feedback
Control
4 COMP
Reg
F1
VAC
L1
C11
D1
D2
D3
D4
T1
L2
C1
C8
R5
C2
+
C9
D9
U1
LC551xD
8
D/ST
C3
D5
S/GND
4
5
COMP NF
OCP
3
R3
C10
LED
DZ1
R6
DZ2 R7
R8 C12
D6
ISENSE
6
C5
ROCP
R1
C4
Cont.
Block
S/GND VCC
1
2
D8
R4
C6
D7
C7
ICs
143
LC5560 Series High Power Factor LED Driver ICs with Harmonics Standard (ICE61000-3-2 Class C) at all load condition
Features
Lineup
Non-isolated type
MOSFET
Part Number
LC5565LD
LC5566LD
*:
VDSS (MIN)
RDS(ON) (MAX)
650V
3.95
1.9
PWM Oscillation
Frequency
fOSC (TYP)
72kHz
60kHz
Maximum ON Time
tON(MAX) (TYP)
POUT*
AC230V / Universal
9.3 s
11.2 s
13W / 10W
20W / 16W
The output power values are based on the rated temperature. Output at 120 to 140% of the rated temperature is
possible for the maximum output power. Note, however, that the output power may be limited by a low output voltage
and by the ON duty specified during transformer design.
VCC
VOCP
VCOMP
VREF
VSEN
PD
0.97
Top
Tstg
Tch
55 to +125
55 to +125
150
C
C
C
Symbol
IDPEAK
(Ta = 25C)
Ratings
LC5565LD
LC5566LD
2.5
4.0
47
86
(ILPEAK=2.0A)
(ILPEAK=2.7A)
35
2.0 to +5.0
0.3 to +7.0
0.3 to +5.0
0.3 to +5.0
EAS
Unit
A
mJ
Remarks
Single Pulse
Single Pulse, VDD=99V, L=20mH
V
V
V
V
V
Board size when mounted on board
15mm15mm
Applications
LED light bulbs
LED lighting equipment
Electrical Characteristics
Parameter
min.
Ratings
typ.
max.
13.8
8.4
18
8.5
9.5
15.1
9.4
21
4.0
11.0
17.3
10.7
4.7
24
1.5
12.5
60
50
8.0
9.0
0.30
0.312
22
6
0.14
0.11
72
60
9.3
11.2
0.55
0.335
14
14
600
0.24
0.16
84
70
11.2
13.4
0.80
0.358
6
22
0.34
0.21
0.66
120
2.2
4.1
28.5
135
0.60
40
2.6
4.5
31.5
0.54
10
3.0
4.9
34.0
3.95
1.9
250
400
42
35.5
Unit
Remarks
VCC(ON)
VCC(OFF)
ICC(ON)
VSTARTUP
ICC(STARTUP)
VCC(BIAS)
V
V
mA
V
mA
V
VCC=13V
Normal Operation
PWM Oscillation Frequency
Maximum ON Time
COMP Pin Control Lower Voltage
Error Amplifier Reference Voltage
Error Amplifier Source Current
Error Amplifier Sink Current
Leading Edge Blanking Time
Quasi-Resonant Operation Threshold Voltage 1
Quasi-Resonant Operation Threshold Voltage 2
fOSC
t ON(MAX)
VCOMP(MIN)
VSEN(TH)
ISEN(SOURCE)
ISEN(SINK)
tON(LEB)
VBD(TH1)
VBD(TH2)
kHz
LC5565LD
LC5566LD
LC5565LD
LC5566LD
V
V
A
A
ns
V
V
Protection Operation
Overcurrent Detection Threshold Voltage
OCP Pin Outflow Current
OCP Pin OVP Threshold Voltage
OLP Threshold Voltage
VCC Pin OVP Threshold Voltage
TSD Operating Temperature
VOCP
IOCP
VBD(OVP)
VCOMP(OLP)
VCC(OVP)
Tj(TSD)
V
A
V
V
V
C
MOSFET
ON Resistance
RDS(ON)
Switching Time
tf
Thermal Resistance*2
ch-c
ns
C/W
LC5565LD
LC5566LD
LC5565LD
LC5566LD
LC5565LD
LC5566LD
For the polarity of current values, the sink is defined as "positive" and the source is defined as "negative" with respect to the IC.
*1: The relationship VCC(BIAS)1 > VCC(OFF) holds true for all products.
*2: Thermal resistance between the MOSFET channel and the case. The case temperature TC is determined by the temperature at the center of the marking surface.
144
ICs
LC5560 Series
Pin Functions
(Unit : mm)
Pin No.
1
2
9.40.3
5
4
+0.3
1.52 -0.05
6.50.2
+0.3
1.0 -0.05
OCP
4
5
6
7
8
COMP
VREF
ISENSE
D/ST
Function
MOSFET source and GND for control
Control circuit power input and Overvoltage protection signal input
Overcurrent protection and Quasi-resonant signal input and
Overvoltage protection signal input
Feedback phase compensation
Dimmer signal input
Feedback current detection and Overvoltage protection signal input
(Pin removed)
MOSFET drain and Startup current input
Block Diagram
7.6TYP
4.20.3
7.50.5
3.40.1
Symbol
S/GND
Vcc
3.30.2
VCC
2
0.25 +0.1
-0.05
8 D/ST
STARTUP
2.54TYP
0~15
0.89TYP
0~15
TSD
UVLO
Reg
0.50.1
Drv
Bias
1 S/GND
S
VREF
R Q
OCP 3
Bottom
Detection
D/ST
ISENSE
OVP
S/GND
VCC
OCP
COMP
OCP
OSC
OLP
6 ISENSE
OTA
LEB
Feedback
Control
4 COMP
Reg
5 VREF
F1
VAC
L1
C11
D1
D2
D3
D4
T1
L2
C1
C8
R5
C2
D9
D5
U1
LC556xLD
8
6
D/ST ISENSE
C3
5
VREF
C5
ROCP
R3
OCP
3
C9
C10
LED
DZ1
R6
DZ2 R7
R8 C12
C4
Cont.
Block
S/GND VCC
1
2
R1
D8
D6
COMP
4
R4
C6
D7
C7
ICs
145
LC5520 Series LED Driver ICs with Harmonics Standard (ICE61000-3-2 Class C) at all load condition
Features
Lineup
Isolated type
Part Number
LC5521D
LC5523D
LC5523F
LC5525F
*:
MOSFET
VDSS (MIN)
RDS(ON) (MAX)
3.95
1.9
1.9
1.1
650V
650V
POUT*
AC230V / Universal
Package
13W / 10W
20W / 16W
60W / 40W
80W / 55W
DIP8
TO220F7
The output power values are based on the rated temperature. Output at 120 to 140% of the rated temperature is
possible for the maximum output power. Note, however, that the output power may be limited by a low output voltage
and by the ON duty specified during transformer design.
(Ta = 25C)
Ratings
Parameter
Symbol
LC5521D
LC5523D
LC5523F
LC5525F
2.5
4.0
9.2
13.0
Drain Current
IDPEAK
47
86
99
233
Avalanche Energy Capacity
EAS
(ILPEAK=2.0A) (ILPEAK=2.7A) (ILPEAK=2.9A) (ILPEAK=4.4A)
Control Supply Voltage
VCC
35
2.0 to +5.0
OCP Pin Voltage
VOCP
FB Pin Voltage
VFB
0.3 to +7.0
0.3 to +5.0
OVP Pin Voltage
VOVP
0.97
1.8
PD
MOSFET Power Dissipation
20.2
23.6
PD2
Operating Ambient Temperature
Top
55 to +125
Storage Temperature
Tstg
55 to +125
Channel Temperature
Tch
150
Applications
Unit
A
mJ
V
V
V
V
W
W
C
C
C
Remarks
Single Pulse
Single Pulse,
VDD=99V, L=20mH
Electrical Characteristics
Parameter
Ratings
typ.
max.
ICC(STARTUP)
VCC(BIAS)
13.8
8.4
42
5.5
9.5
15.1
9.4
57
3.0
11.0
17.3
10.7
3.7
72
1.0
12.5
V
V
mA
V
mA
V
fOSC
tON(MAX)
VFB(MIN)
IFB(MAX)
tON(LEB)
VBD(TH1)
VBD(TH2)
11.0
30.0
0.55
40
0.14
0.12
14.0
40.0
0.90
25
500
0.24
0.17
18.0
50.0
1.25
10
0.34
0.22
kHz
s
V
A
ns
V
V
VOCP
IOCP
VBD(OVP)
0.66
120
2.2
5.0
4.1
1.6
28.5
135
0.60
40
2.6
5.5
4.5
2.0
31.5
0.54
10
3.0
6.0
4.9
2.4
34.0
V
A
V
650
300
3.95
1.9
1.9
1.1
250
400
400
400
42
35.5
3.1
2.2
V
A
Symbol
Unit
Remarks
VCC(ON)
VCC(OFF)
ICC(ON)
VSTARTUP
VCC=13V
Normal Operation
PWM Oscillation Frequency
Maximum ON Time
FB Pin Control Lower Voltage
Maximum Feedback Current
Leading Edge Blanking Time
Quasi-Resonant Operation Threshold Voltage 1
Quasi-Resonant Operation Threshold Voltage 2
Protection Operation
Overcurrent Detection Threshold Voltage
OCP Pin Outflow Current
OCP Pin OVP Threshold Voltage
OLP Threshold Voltage
OVP Pin OVP Threshold Voltage
VCC Pin OVP Threshold Voltage
TSD Operating Temperature
VCOMP(OLP) 1
VCOMP(OLP) 2
VOVP(OVP)
VCC(OVP)
Tj(TSD)
V
V
V
C
MOSFET
Drain-Source Voltage
Drain Leakage Current
VDSS
IDSS
ON Resistance
RDS(ON)
Switching Time
tf
Thermal Resistance*2
chc
ns
C/W
LC5521D
LC5523D
LC5523F
LC5535F
LC5521D
LC5523D
LC5523F
LC5535F
LC5521D
LC5523D
LC5523F
LC5535F
For the polarity of current values, the sink is defined as "positive" and the source is defined as "negative" with respect to the IC.
*1: The relationship VCC(BIAS)1 > VCC(OFF) holds true for all products.
*2: Thermal resistance between the MOSFET channel and the case. The case temperature TC is determined by the temperature at the center of the marking surface.
146
ICs
LC5520 Series
External Dimensions
Pin Functions
(Unit : mm)
LC552xD (DIP8)
LC552xD (DIP8)
9.40.3
5
Symbol
S/GND
Vcc
OCP
4
5
6
7
8
FB
NF
OVP
D/ST
6.50.2
Pin No.
1
1
1.0
4
1.52 +0.3
-0.05
+0.3
-0.05
4.20.3
7.50.5
3.40.1
7.6TYP
3.30.2
*:
-0.05
0~15
0.89TYP
LC552xF (TO220F-7)
0~15
OVP
NF
5
4
6
3
FB
OVP
FB
OCP
OCP
Vcc
4
1
Symbol
D/ST
S/GND
NC
VCC
Pin No.
1
2
3
S/GND
D/ST
0.50.1
0.25 +0.1
2.54TYP
6
7
LC552xF (TO220F-7)
2.80.2
4.20.2
2.60.2
(5.6)
1 D/ST
150.3
3.20.2
2 S/GND
VCC
3 NC
2(4)
4 VCC
(1.1)
8(1)
TSD
6 FB
(Measured
at the root)
OVP
6(7)
S/GND
R Q
OCP
3(5)
Bottom
Detection
20.15
(Measured
at the root)
1(2)
Rend
0.45 +0.2
-0.1
5xP1.170.15
=5.850.15
Reg
DRV
OVP
50.5
50.5
10.40.5
+0.2
70.55 -0.1
UVLO
Bias
7 OVP
Rend
D/ST
STARTUP
5 OCP
2.60.1
70.620.15
Function
MOSFET drain and Startup current input
MOSFET source and GND for control
Block Diagram
(LF3051)
100.2
Gate burr
Function
MOSFET source and GND for control
Control circuit power input and Overvoltage protection signal
input
Overcurrent protection and Quasi-resonant signal input and
Overvoltage protection signal input
Feedback signal input and Overload protection signal input
(No function*)
Overvoltage protection signal input
(Pin removed)
MOSFET drain and Startup current input
OSC
OLP
2.540.6
(Measured at the tip)
NF
(NC)
5.080.6
(Measured
at the root)
5(3)
OCP
LEB
(Measured
at the tip)
Feedback
Control
FB
4(6)
Reg
0.5
0.5
0.5
Plan View
1
0.5
Side View
2 3 45 6 7
VAC
L1
C11
D1
D2
D3
D4
T1
L2
C1
C8
D8
R5
C2
C9
D9
D5
U1
8(1)
2(4)
D/ST
VCC
C3
Cont.
Block
R1
1(2)
5(3)
3(5)
R3
DZ1
R10
Q1
DZ2
PC2
OVP 6(7)
R13
R11
R14
R12
C13 R17
R15
DZ1
U2
R18
+
C14
FB
LED
PC1
C12
R6
C15 R19
R16
R20
C16
C17
4(6)
C18
ROCP
R8
C4
R7
C5
PC2
+
C10
R9
D6
S/GND NF(NC) OCP
DZ3
R4
R21
C6
D7
PCI
C7
ICs
147
LC5540 Series LED Driver ICs with Harmonics Standard (ICE61000-3-2 Class C) at all load conditon
Features
Lineup
Isolated type
Part Number
LC5545LD
LC5546LD
LC5548LD
LC5546LF
LC5547LF
LC5549LF
*:
MOSFET
PWM Oscillation Frequency
fOSC (TYP)
VDSS (MIN) RDS(ON) (MAX)
3.95
72kHz
650V
1.9
60kHz
800V
3.5
72kHz
1.9
650V
40kHz
1.1
800V
1.7
POUT*
AC230V / Universal
9.3 s
11.2 s
9.3 s
13W / 10W
20W / 16W
13W / 10W
60W / 40W
80W / 55W
60W / 40W
17.5 s
Package
DIP8
TO220F7
The output power values are based on the rated temperature. Output at 120 to 140% of the rated temperature is possible for the
maximum output power. Note, however, that the output power may be limited by a low output voltage and by the ON duty
specified during transformer design.
(Ta = 25C)
Ratings
Unit
Remarks
Parameter
Symbol
LC5545LD LC5546LD LC5548LD LC5546LF LC5547LF LC5549LF
Drain Current
IDPEAK
2.5
4.0
2.6
9.2
13.0
10.5
A Single Pulse
Single Pulse,
Avalanche Energy
47
86
56
99
233
92
EAS
mJ
Capacity
(ILPEAK=2.0A) (ILPEAK=2.7A) (ILPEAK=2.3A) (ILPEAK=2.9A) (ILPEAK=4.4A) (ILPEAK=2.8A)
VDD=99V, L=20mH
Control Supply Voltage VCC
35
V
OCP Pin Voltage
VOCP
2.0 to +5.0
V
FB Pin Voltage
VFB
0.3 to +7.0
V
0.3 to +5.0
V
OVP Pin Voltage
VOVP
PD
0.97
1.8
W
MOSFET Power
Dissipation
PD 2
20.2
23.6
W With infinite heatsink
Operating Internal
C
TF
20 to +115
Frame Temperature
Operating Ambient
C
Top
55 to +125
55 to +115
Temperature
C
Storage Temperature Tstg
55 to +125
C
Channel Temperature Tch
150
Applications
LED light bulbs
LED lighting equipment
Electrical Characteristics
Parameter
Maximum ON Time
tON(MAX) (TYP)
Symbol
min.
Ratings
typ.
max.
13.8
8.4
18
8.5
9.5
15.1
9.4
21
4.0
11
17.3
10.7
4.7
24
1.5
12.5
60
50
33
8.0
9.0
14
0.50
40
0.14
0.11
72
60
40
9.3
11.2
17.5
0.85
25
600
0.24
0.16
84
70
47
11.2
13.4
21
1.20
10
0.34
0.21
0.66
120
2.2
4.1
1.6
28.5
135
0.60
40
2.6
4.5
2.0
31.5
0.54
10
3.0
4.9
2.4
34.0
3.95
1.9
3.5
1.9
1.1
1.7
250
400
400
400
400
300
42*2
35.5*2
40*2
3.1*3
2.2*3
2.2*3
Unit
Remarks
VCC(ON)
VCC(OFF)
ICC(ON)
VSTARTUP
ICC(STARTUP)
VCC(BIAS)
V
V
mA
V
mA
V
VCC=13V
Normal Operation
PWM Oscillation Frequency
fOSC
Maximum ON Time
t ON(MAX)
VFB(MIN)
IFB(MAX)
t ON(LEB)
VBD(TH1)
VBD(TH2)
kHz
LC5545LD/48L
LC5546LD
LC554xLF
LC5545LD/48L
LC5546LD
LC554xLF
V
A
ns
V
V
Protection Operation
Overcurrent Detection Threshold Voltage
OCP Pin Outflow Current
OCP Pin OVP Threshold Voltage
OLP Threshold Voltage
OVP Pin OVP Threshold Voltage
VCC Pin OVP Threshold Voltage
TSD Operating Temperature
VOCP
IOCP
VBD(OVP)
VCOMP(OLP)
VOVP(OVP)
VCC(OVP)
Tj(TSD)
V
A
V
V
V
V
C
MOSFET
ON Resistance
RDS(ON)
Switching Time
tf
chc
Thermal Resistance*3
chF
ns
C/W
For the polarity of current values, the sink is defined as "positive" and the source is defined as "negative" with respect to the IC.
*1: The relationship VCC(BIAS)1 > VCC(OFF) holds true for all products.
*2: Thermal resistance between the MOSFET channel and the case. The case temperature TC is determined by the temperature at the center of the marking surface.
*3: Thermal resistance between the MOSFET channel and the internal frame
148
ICs
LC5545LD
LC5546LD
LC5548LD
LC5546LF
LC5547LF
LC5549LF
LC5545LD
LC5546LD
LC5548LD
LC5546LF
LC5547LF
LC5549LF
LC5545LD
LC5546LD
LC5548LD
LC5546LF
LC5547LF
LC5549LF
LC5540 Series
External Dimensions
Pin Functions
(Unit : mm)
LC554xLD (DIP8)
LC554xLD (DIP8)
9.40.3
5
Pin No.
1
Symbol
S/GND
Vcc
OCP
4
5
6
7
8
FB
NF
OVP
D/ST
6.50.2
4
1.52 +0.3
-0.05
1.0 +0.3
-0.05
4.20.3
7.50.5
3.40.1
7.6TYP
3.30.2
*:
-0.05
0~15
LC554xLF (TO220F-7)
NF
0~15
Pin No.
1
2
Symbol
D/ST
S/GND
0.89TYP
Vcc
OCP
5
6
7
FB
NC
OVP
OVP
6
3
Function
MOSFET drain and Startup current input
MOSFET source and GND for control
Control circuit power input and Overvoltage protection signal
input
Overcurrent protection and Quasi-resonant signal input and
Overvoltage protection signal input
Feedback signal input and Overload protection signal input
4
FB
OCP
7
2
D/ST
0.50.1
VCC
0.25 +0.1
2.54TYP
S/GND
Function
MOSFET source and GND for control
Control circuit power input and Overvoltage protection signal
input
Overcurrent protection and Quasi-resonant signal input and
Overvoltage protection signal input
Feedback signal input and Overload protection signal input
(No function*)
Overvoltage protection signal input
(Pin removed)
MOSFET drain and Startup current input
LC554xLF (TO220F-7)
Block Diagram
(LF3051)
100.2
4.20.2
2.80.2
2.60.2
1 D/ST
(5.6)
Gate burr
150.3
3.20.2
2 S/GND
VCC
3 NC
2(4)
4 VCC
(1.1)
8(1)
TSD
6 FB
DRV
OVP
50.5
50.5
10.40.5
+0.2
70.55 -0.1
OVP
6(7)
S/GND
R Q
OCP
3(5)
Bottom
Detection
0.45 +0.2
-0.1
5xP1.170.15
=5.850.15
20.15
(Measured
at the root)
OSC
OLP
2.540.6
(Measured at the tip)
NF
(NC)
5.080.6
(Measured
at the root)
1(2)
Rend
Rend
Reg
UVLO
Bias
7 OVP
70.620.15
D/ST
STARTUP
5 OCP
2.60.1
5(3)
OCP
LEB
(Measured
at the tip)
Feedback
Control
FB
4(6)
Reg
0.5
0.5
0.5
Plan View
1
0.5
Side View
2 3 45 6 7
VAC
L1
C11
D1
D2
D3
D4
T1
L2
C1
C8
D8
R5
C2
C9
D9
D5
U1
8(1)
2(4)
D/ST
VCC
C3
Cont.
Block
R1
1(2)
5(6)
3(4)
R3
PC1
R9
PC2
OVP 6(7)
R13
R14
C13 R17
R15
U2
R18
+
C14
FB
LED
R11
DZ1
C12
R6
C15 R19
R16
R20
C16
C17
4(5)
C18
ROCP
R10
Q1
DZ2
R7
C5
R8
PC2
+
C10
C4
D6
S/GND NF(NC) OCP
DZ3
R4
R21
C6
D7
PCI
C7
ICs
149
HSOP8 package
PWM dimming
Parameter
VIN Pin Voltage
SW Pin Voltage
CSP Pin Voltage
CSN Pin Voltage
CSP/CSN Pin Differential Voltage
COMP Pin Voltage
DIM Pin Voltage
Output current: 2A
Power Dissipation
Junction Temperature
Storage Temperature
Thermal Resistance
(Junction to Ambient Air)
Protection functions
Overcurrent protection (OCP)
Overvoltage protection (OVP)
Thermal shutdown (TSD)
(Ta = 25C)
Symbol
VIN
VSW
VCSP
VCSN
VCSPCSN
VCOMP
VDIM
Ratings
0.3 to 50
0.3 to 50
0.3 to 50
0.3 to 50
0.3 to 5.5
0.3 to 5.5
0.3 to 5.5
Unit
V
V
V
V
V
V
V
Pd
1.35
Tj
Tstg
125
40 to 150
C
C
ja
74
C/W
Conditions
Parameter
Input Voltage Range
Output Current Range
PK- PK Inductor Ripple Current
PWM Dimmer Signal Frequency Range
Operating Temperature Range
*:
Symbol
VIN
IOUT
IL
fPWM
TOP
Parameter
150
ICs
Unit
V
A
A
Hz
C
Electrical Characteristics
Operation Startup Voltage
Operation Stop Voltage
Operation Startup/Stop Hysteresis
Supply Current (Operating)
Supply Current (Shutdown)
Oscillation Frequency
Minimum ON Time
Maximum ON Duty
ON Time 1
ON Time 2
Current Sense Voltage
CSP Pin Input Current
CSN Pin Input Current
CSP Pin Operation Voltage
COMP Pin Source Current
COMP Pin Sink Current
OVP Threshold
SW Pin Leakage Current
DIM Pin Voltage During LED ON
DIM Pin Voltage During LED OFF
DIM Pin Hysteresis
Error Amplifier Conductance
SW ON Resistance
SW Pin Limiting Current
Thermal Shutdown
Thermal Shutdown Hysteresis
Ratings
9 to 46
Up to 2.0
Up to 0.8
32 to 20000
40 to 85
min.
7.7
7.2
0.1
Ratings
typ.
8.5
8.0
0.3
420
35
89
300
0.85
95
85
40
4.75
95
38
200
500
75
94
600
1.4
100
130
65
1.2
0.75
0.3
1.4
1.0
0.5
750
215
3.5
160
15
60
60
240
max.
9.4
8.9
0.5
7.0
1000
570
100
98
800
1.8
105
175
95
50
38
95
280
100
1.7
1.2
0.7
Unit
V
V
V
mA
A
kHz
nsec
%
nsec
usec
mV
A
A
V
A
A
mV
A
V
V
V
S
m
A
C
C
Conditions
VIN=6.5V
VCOMP=0V
VCOMP=4V
VCOMP=0.7V
VCOMP=1.2V
VCS=20mV, VCOMP=2V
VCS=180mV, VCOMP=2V
ISW=1A
LC5720S Series
LC5720
a
b
Pin 1
marking
0.080.08
5
0.050.05
6.20
4.40
Block Diagram
(Unit : mm)
VIN 5
UVLO
4 SW
TSD
REG
4
Enlarged View of A
CSP 6
CSN 7
0.15
5.20
1.50
0.695 TYP
OSC
PWM
LOGIC
OVP
3 GND
Pin Assignment
q COMP
w NC
*: Exposed pad on backside e GND
connect to GND pin.
r SW
t VIN
Plastic Mold Package Type
y CSP
Flammability : UL 94V-0
u CSN
Product Mass : Approx. 0.1 g
i DIM
0.4
1.27
2.90
2.70
0.40
DIM 8
OCP
+
Error AMP
2 NC
Current
Comp.
1 COMP
CSP
VIN
CIN
LC5720S
CSN
RCS
COUT
7
ROVP
CS
LED
DS
DIM
COMP
SW
GND
3
CP
DZOVP
Output
voltage
CIN: 1F/50V
COUT: 1F/50V
CS: 0.22F
CP: 0.022F
RS: 33k
RCS: 0.1 (When ILED=1A)
DS: SJPB-L6
L:
22H (When VIN=18V, VLED=10V)
RS
Boost Application
Input
voltage
CSP
VIN
CIN
DS
LC5720S
CSN
8
1
CS
6
RCS
COUT
7
ROVP
DIM
COMP
SW
GND
3
CP
LED
4
DZOVP
Output
voltage
RS
CIN: 1F/50V
COUT: 1F/50V
CS: 0.22F
CP: 0.022F
RS: 33k
RCS: 0.1 (When ILED=1A)
DS: SJPB-L6
L:
22H (When VIN=10V, VLED=18V)
Buck-Boost Application
Input
voltage
DS
CCSP
5
CIN
VIN
CSP
LC5720S
CSN
8
1
CS
6
RCS
ROVP
LED
DIM
COMP
SW
GND
3
C
P
COUT
DZOVP
Output
voltage
CIN: 1F/50V
COUT: 1F/50V
CS: 0.22F
CP: 0.022F
RS: 33k
RCS: 0.1 (When ILED=1A)
DS: SJPB-L6
L:
22H (When VIN=15V, VLED=18V)
RS
ICs
151
152
ICs
Transistors
2-2
2-3
2-4
2 Transistors
Ordering Information
All products listed must be ordered in standard packing increments.
Series Name/
Product Name
Series Name/
Product Name
Bulk
Taping
Bulk
Taping
2SA1186
TO3P
500(Box)/1080(Stick)
2SC3284
TO3P
500(Box)/1080(Stick)
2SA1215
MT200
250(Box)
2SC3519
TO3P
500(Box)/1080(Stick)
2SA1216
MT200
250(Box)
2SC3519A
TO3P
500(Box)/1080(Stick)
2SA1294
TO3P
500(Box)/1080(Stick)
2SC3835
TO3P
500(Box)/1080(Stick)
2SA1295
MT200
250(Box)
2SC3851
TO220F
1000(Box)/3750(Stick)
2SA1303
TO3P
500(Box)/1080(Stick)
2SC3851A
TO220F
1000(Box)/3750(Stick)
2SA1386
TO3P
500(Box)/1080(Stick)
2SC3852
TO220F
1000(Box)/3750(Stick)
2SA1386A
TO3P
500(Box)/1080(Stick)
2SC3852A
TO220F
1000(Box)/3750(Stick)
2SA1488
TO220F
1000(Box)/3750(Stick)
2SC3856
TO3P
500(Box)/1080(Stick)
2SA1488A
TO220F
1000(Box)/3750(Stick)
2SC3857
MT200
250(Box)
2SA1492
TO3P
500(Box)/1080(Stick)
2SC3858
MT200
250(Box)
2SA1493
MT200
250(Box)
2SC3927
TO3P
500(Box)/1080(Stick)
2SA1494
MT200
250(Box)
2SC4024
TO220F
1000(Box)/3750(Stick)
2SA1567
TO220F
1000(Box)/3750(Stick)
2SC4131
TO3PF
500(Box)/1080(Stick)
2SA1568
TO220F
1000(Box)/3750(Stick)
2SC4138
TO3P
500(Box)/1080(Stick)
2SA1667
TO220F
1000(Box)/3750(Stick)
2SC4140
TO3P
500(Box)/1080(Stick)
2SA1668
TO220F
1000(Box)/3750(Stick)
2SC4153
TO220F
1000(Box)/3750(Stick)
2SA1673
TO3PF
500(Box)/1080(Stick)
2SC4300
TO3PF
500(Box)/1080(Stick)
2SA1693
TO3P
500(Box)/1080(Stick)
2SC4301
TO3PF
500(Box)/1080(Stick)
2SA1694
TO3P
500(Box)/1080(Stick)
2SC4304
TO220F
1000(Box)/3750(Stick)
2SA1695
TO3P
500(Box)/1080(Stick)
2SC4381
TO220F
1000(Box)/3750(Stick)
2SA1725
TO220F
1000(Box)/3750(Stick)
2SC4382
TO220F
1000(Box)/3750(Stick)
2SA1746
TO3PF
500(Box)/1080(Stick)
2SC4388
TO3PF
500(Box)/1080(Stick)
2SA1859
TO220F
1000(Box)/3750(Stick)
2SC4445
TO3PF
500(Box)/1080(Stick)
2SA1859A
TO220F
1000(Box)/3750(Stick)
2SC4466
TO3P
500(Box)/1080(Stick)
2SA1860
TO3PF
500(Box)/1080(Stick)
2SC4467
TO3P
500(Box)/1080(Stick)
2SA1907
TO3PF
500(Box)/1080(Stick)
2SC4468
TO3P
500(Box)/1080(Stick)
2SA1908
TO3PF
500(Box)/1080(Stick)
2SC4495
TO220F
1000(Box)/3750(Stick)
2SA1909
TO3PF
500(Box)/1080(Stick)
2SC4511
TO220F
1000(Box)/3750(Stick)
2SA2151
TO3P
500(Box)/1080(Stick)
2SC4518
TO220F
1000(Box)/3750(Stick)
2SA2151A
TO3P
500(Box)/1080(Stick)
2SC4518A
TO220F
1000(Box)/3750(Stick)
2SA2223
TO3P
500(Box)/1080(Stick)
2SC4546
TO220F
1000(Box)/3750(Stick)
2SB1257
TO220F
1000(Box)/3750(Stick)
2SC4706
TO3P
500(Box)/1080(Stick)
2SB1258
TO220F
1000(Box)/3750(Stick)
2SC4883
TO220F
1000(Box)/3750(Stick)
2SB1259
TO220F
1000(Box)/3750(Stick)
2SC4883A
TO220F
1000(Box)/3750(Stick)
2SB1351
TO220F
1000(Box)/3750(Stick)
2SC4886
TO3PF
500(Box)/1080(Stick)
2SB1382
TO3PF
500(Box)/1080(Stick)
2SC5071
TO3P
500(Box)/1080(Stick)
2SB1383
TO3P
500(Box)/1080(Stick)
2SC5099
TO3PF
500(Box)/1080(Stick)
2SB1420
TO3P
500(Box)/1080(Stick)
2SC5100
TO3PF
500(Box)/1080(Stick)
2SB1559
TO3P
500(Box)/1080(Stick)
2SC5101
TO3PF
500(Box)/1080(Stick)
2SB1560
TO3P
500(Box)/1080(Stick)
2SC5130
TO220F
1000(Box)/3750(Stick)
2SB1570
MT200
250(Box)
2SC5287
TO3P
500(Box)/1080(Stick)
2SB1587
TO3PF
500(Box)/1080(Stick)
2SC6011
TO3P
500(Box)/1080(Stick)
2SB1588
TO3PF
500(Box)/1080(Stick)
2SC6011A
TO3P
500(Box)/1080(Stick)
2SB1647
TO3P
500(Box)/1080(Stick)
2SC6145
TO3P
500(Box)/1080(Stick)
2SB1648
MT200
250(Box)
2SD1785
TO220F
1000(Box)/3750(Stick)
2SB1649
TO3PF
500(Box)/1080(Stick)
2SD1796
TO220F
1000(Box)/3750(Stick)
2SC2837
TO3P
500(Box)/1080(Stick)
2SD2014
TO220F
1000(Box)/3750(Stick)
2SC2921
MT200
250(Box)
2SD2015
TO220F
1000(Box)/3750(Stick)
2SC2922
MT200
250(Box)
2SD2016
TO220F
1000(Box)/3750(Stick)
2SC3263
TO3P
500(Box)/1080(Stick)
2SD2017
TO220F
1000(Box)/3750(Stick)
2SC3264
MT200
250(Box)
2SD2045
TO3PF
500(Box)/1080(Stick)
154
Transistors
2 Transistors
Series Name/
Product Name
Package
Bulk
Taping
2SD2081
TO220F
1000(Box)/3750(Stick)
MKS5015
TO3P
1440(Stick)
2SD2082
TO3PF
500(Box)/1080(Stick)
MKS5020
TO3P
1440(Stick)
Bulk
Taping
Series Name/
Product Name
Package
2SD2083
TO3P
500(Box)/1080(Stick)
SKH04100
TO263(Surface-mount)
6400
2SD2141
TO220F
1000(Box)/3750(Stick)
SKH06100
TO263(Surface-mount)
6400
2SD2389
TO3P
500(Box)/1080(Stick)
SKH1070
TO263(Surface-mount)
6400
2SD2390
TO3P
500(Box)/1080(Stick)
SKP202
TO263(Surface-mount)
6400
2SD2401
MT200
250(Box)
SKP253
TO263(Surface-mount)
6400
2SD2438
TO220F
1000(Box)/3750(Stick)
SLA4xxx
SLA12Pin
250(Box)/1080(Stick)
2SD2439
TO3PF
500(Box)/1080(Stick)
SLA4xxx
SLA21Pin
250(Box)/1080(Stick)
2SD2560
TO3P
500(Box)/1080(Stick)
SLA5xxx
SLA12Pin
250(Box)/1080(Stick)
2SD2561
MT200
250(Box)
SLA5xxx
SLA15Pin
250(Box)/1080(Stick)
2SD2562
TO3PF
500(Box)/1080(Stick)
SLA6xxx
SLA12Pin
250(Box)/1080(Stick)
2SD2641
TO3P
500(Box)/1080(Stick)
SMA4xxx
SMA12Pin
1440(Stick)
2SD2642
TO220F
1000(Box)/3750(Stick)
SMA5xxx
SMA12Pin
1440(Stick)
2SD2643
TO3PF
500(Box)/1080(Stick)
SMA5xxx
SMA15Pin
1440(Stick)
2SK2420
TO220F
3750(Stick)
SMA6xxx
SMA12Pin
1440(Stick)
2SK2701A
TO220F
3750(Stick)
STAxxx
STA8Pin
1000(Box)/4050(Stick)
2SK2803
TO220F
3750(Stick)
STAxxx
STA10Pin
3200(Box)/3300(Stick)
2SK2848
TO220F
3750(Stick)
STD01N
TO3P-5
500(Box)/1080(Stick)
2SK2943
TO220F
3750(Stick)
STD01P
TO3P-5
500(Box)/1080(Stick)
2SK3003
TO220F
3750(Stick)
STD03N
TO3P-5
500(Box)/1080(Stick)
2SK3004
TO220F
3750(Stick)
STD03P
TO3P-5
500(Box)/1080(Stick)
2SK3199
TO220F
3750(Stick)
2SK3710
TO220S(Surface-mount)
1000
2SK3711
TO3P
1080(Stick)
2SK3800
TO220S(Surface-mount)
1000
2SK3801
TO3P
1080(Stick)
EKG1020
TO220
4000(Stick)
EKH04100
TO220
4000(Stick)
EKH06100
TO220
4000(Stick)
EKH1070
TO220
4000(Stick)
EKV550
TO220
1000(Stick)
FGM603
TO3PF
1080(Stick)
FGM622S
TO3PF
1080(Stick)
FGM623S
TO3PF
1080(Stick)
FKG1020
TO220F-A
4000(Stick)
FKH0470
TO220F-A
4000(Stick)
FKH0660
TO220F-A
4000(Stick)
FKH1040
TO220F-A
4000(Stick)
FKP202
TO220F
3750(Stick)
FKP250A
TO3PF
1080(Stick)
FKP252
TO220F
3750(Stick)
FKP253
TO220F
3750(Stick)
FKP280A
TO3PF
1080(Stick)
FKP300A
TO3PF
1080(Stick)
FKP330C
TO3PF
1080(Stick)
FKV460S
TO220S(Surface-mount)
1000
FKV550N
TO220F
3750(Stick)
FKV575
TO220F
3750(Stick)
FKV660S
TO220S(Surface-mount)
1000
MGD623N
TO3P
1080(Stick)
MGD623S
TO3P
1080(Stick)
Transistors
155
2 Transistors
Application Note
Since reliability can be affected adversely by improper storage environment or handling methods during Characteristic tests, please observe the
following cautions.
Silicone Grease
When using a heatsink, please coat thinly and evenly the back surface of
the device and both surfaces of the insulating plate with silicone grease to
lower the thermal resistance between the device and the heatsink.
Please select proper silicone grease carefully since the oil in some grease
products may penetrate the device and result in an extremely short device
life.
Recommended Silicone Grease
G-746 (Shin-Etsu Chemical)
YG6260 (Momentive Performance Materials Inc.)
SC102 (Dow Corning Toray Silicone)
Mounting Torque
When mounting torque is insufficient, thermal resistance increases, and so
heat radiation effect is decreased. When the torque is excessive, the
screw may be broken, the heatsink may be deformed, and the device
frame may be distorted, resulting in the device damage. Recommended
mounting torque per package is as follows:
Screw Torque
0.490 to 0.686 Nm (5 to 7kgfcm)
0.686 to 0.882 Nm (7 to 9kgfcm)
0.588 to 0.784 Nm (6 to 8kgfcm)
156
Transistors
Heatsink
A larger contact area between the device and the heatsink is required for
more effective heat radiation. To ensure a larger contact area, minimize
mounting holes. And select a heatsink with a surface smooth enough and
free from burrs and slivers.
Soldering Temperature
In general, the device mounted on a printed circuit board is subjected to
high temperatures from flow solder in a solder bath, or, from a soldering
iron at hand soldering.
The testing method and test conditions for a device's heat resistance to
soldering are:
At a distance of 1.5mm from the device's main body, apply 260C for 10
seconds, and 350C for 3 seconds.
Please observe these limits and finish soldering in as short a time as
possible.
2-1 Transistors
Selection Guide
V CEO-I C
C4304
C4445
800
C4300
600
550
C4706
C4518
C4518A
C5287
400
380
250
230
C4301
C3927
C5130
C4138
C4546
C4140
C5071
D2141
D2017
200
A1668
C4382
180
A1859A
C4883A
D2016
160
150
A1667
A1859
C4381
C4883
B1559
B1587
D2389
D2438
140
120
D2015
D1785
D2045
C3852A
A1488A
C3851A
D2014
60
C3852
A1488
B1257
C3851
D1796
50
C4495
A1694
A1908
C4467
C5100
A1303
A1860
C3284
C4886
A1494
C3858
A1216
C2922
B1648
D2561
B1382
B1420
D2082
B1383
D2083
A1568
B1351
C4024
B1570
D2401
A1295
C3264
D2641
D2642
D2643
B1258
A1693
A1725
A1907
C4466
C4511
C5099
110
100
80
C3835
C4153
A1186
B1560
B1588
C2837
D2390
D2439
A1695
A1909
C4468
C5101
B1259
D2081
A1294
C3263
A2151A
C6011A
A2223
C6145
A1493
C3857
A2151
C6011
A1386A
A1492
A1673
C3519A
C3856
C4388
A1215
A1386
C2921
C3519
B1647
B1649
D2560
D2562
10
A1567
A1746
12
C4131
14
15
16
17
18
25
Transistors
157
2-1 Transistors
Audio Transistors
Output Transistors
Chip
Pc
Ic
VCEO
(W)
(A)
(V)
30
60
75
80
85
100
125
130
150
160
200
Single Transistors
Package
General
Darlington
LAPT
80
2SA1725
2SC4511
TO-220F (FM20)
80
2SA1693
2SC4466
TO-3P (MT-100)
80
2SA1907
2SC5099
TO-3PF (FM100)
120
2SA1908
2SC5100
150
120
2SA1694
2SC4467
10
140
2SA1909
2SC5101
150
2SB1559
2SD2389
TO-3P (MT-100)
10
150
2SB1588
2SD2439
TO-3PF (FM100)
14
150
15
150
2SB1649
2SD2562
15
180
2SA1673
2SC4388
10
140
2SA1695
2SC4468
10
150
10
150
14
150
15
150
15
160
15
180
15
TO-3PF (FM100)
2SB1587
2SD2438
TO-3PF (FM100)
TO-3P (MT-100)
TO-3PF (FM100)
2SA1860
2SC4886
TO-3PF (FM100)
TO-3PF (FM100)
TO-3PF (FM100)
TO-3P (MT-100)
2SA1186
2SC2837
2SA1303
TO-3P (MT-100)
2SB1560
2SD2390
2SB1647
2SD2560
TO-3P (MT-100)
2SC3284
TO-3P (MT-100)
TO-3P (MT-100)
2SA1386
2SC3519
180
2SA1386A
2SC3519A
15
230
2SA1294
2SC3263
12
150
15
160
15
200
2SA1493
2SC3857
15
200
2SA2151
2SC6011
TO-3P (MT-100)
15
230
2SA2151A
2SC6011A
TO-3P (MT-100)
15
230
2SA2223
2SC6145
17
150
17
180
17
200
17
230
2SA1492
TO-3P (MT-100)
2SC3856
TO-3P (MT-100)
TO-3P (MT-100)
TO-3P (MT-100)
2SB1570
2SA1215
2SD2401
TO-3P (MT-100)
2SB1648
2SA1494
2SC2921
2SA1216
2SC2922
2SA1295
2SC3264
2SD2561
2SC3858
Output Transistors with Temperature Compensating Function (Refer to our Web site for applications)
Pc (W)
IC (A)
VCEO (V)
Package
STD01P
Part Number
STD01N
100
10
150
TO3P-5pin
STD03P
STD03N
160
15
160
TO3P-5pin
Pc (W)
fT (MHz)
Package
Remarks
2SC4495
25
VCEO (V)
50
Ic (A)
3
hFE (min)
500
40
TO-220F (FM20)
2SA1859
2SC4883
20
150
60
60/120
TO-220F (FM20)
Driver
2SA1859A
2SC4883A
20
180
60
60/120
TO-220F (FM20)
Driver
2SA1667
2SC4381
25
150
60
20/15
TO-220F (FM20)
Driver
2SA1668
2SC4382
25
200
60
20/15
TO-220F (FM20)
Driver
158
Transistors
2-1 Transistors
Switching Transistors
DC-DC Converter
Part Number
VCBO
VCEO
IC
PC
(V)
(V)
(A)
(W)
50
10
35
TO-220F
100
15
60
TO-3PF
200
120
30
TO-220F
70
TO-3P
2SC4024
2SC4131
2SC4153
2SC3835
Package
VCEO
IC
PC
(V)
(V)
(A)
(W)
10
80
TO-3P
500
400
12
100
TO-3P
2SC4140
18
130
TO-3P
2SC5130
30
TO-220F
30
TO-220F
Part Number
2SC4138
2SC5071
600
400
2SC4546
Package
VCBO
VCEO
IC
PC
(V)
(V)
(A)
(W)
2SC4518
TO-220F
80
TO-3P
10
120
TO-3P
14
130
TO-3P
550
2SC3927
2SC4706
35
2SC5287
900
600
2SC4304
2SC4445
Package
800
35
TO-220F
60
TO-3PF
2SC4300
75
TO-3PF
2SC4301
80
TO-3PF
35
TO-220F
2SC4518A
1000
550
Transistors
159
2-1 Transistors
Applications
VCBO
VCEO
Ic
Pc
(V)
(V)
(A)
(W)
ICBO
Conditions
VCB
(A)
(V)
hFE
min
max
Conditions
VCE
Ic
(V)
(A)
2SA1186
Audio, general-purpose
150
150
10
100
100
150
50
180
2SA1215
Audio, general-purpose
160
160
15
150
100
160
50
180
2SA1216
Audio, general-purpose
180
180
17
200
100
180
30
180
2SA1294
Audio, general-purpose
230
230
15
130
100
230
50
140
2SA1295
Audio, general-purpose
230
230
17
200
100
230
50
140
2SA1303
Audio, general-purpose
150
150
14
125
100
150
50
180
2SA1386
Audio, general-purpose
160
160
15
130
100
160
50
180
2SA1386A
Audio, general-purpose
180
180
15
130
100
180
50
180
2SA1488
Audio, general-purpose
60
60
25
100
60
40
2SA1488A
Audio, general-purpose
80
80
25
100
80
40
2SA1492
Audio, general-purpose
180
180
15
130
100
180
50
180
2SA1493
Audio, general-purpose
200
200
15
150
100
200
50
180
2SA1494
Audio, general-purpose
200
200
17
200
100
200
50
180
2SA1567
50
50
12
35
100
50
50
2SA1568
60
60
12
35
100
60
50
2SA1667
150
150
25
10
150
60
10
0.7
2SA1668
200
200
25
10
200
60
10
0.7
2SA1673
Audio, general-purpose
180
180
15
85
10
180
50
180
2SA1693
Audio, general-purpose
80
80
60
10
80
50
180
2SA1694
Audio, general-purpose
120
120
80
10
120
50
180
2SA1695
Audio, general-purpose
140
140
10
100
10
140
50
180
2SA1725
Audio, general-purpose
80
80
30
10
80
50
180
2SA1746
70
50
12 (Pulse 20)
60
10
70
50
2SA1859
150
150
20
10
150
60
240
10
0.7
2SA1859A
180
180
20
10
180
60
240
10
0.7
2SA1860
Audio, general-purpose
150
150
14
80
100
150
50
180
2SA1907
Audio, general-purpose
80
80
60
10
80
50
180
2SA1908
Audio, general-purpose
120
120
75
10
120
50
180
2SA1909
Audio, general-purpose
140
140
10
80
10
140
50
180
2SA2151
Audio, general-purpose
200
200
15
160
10
200
50
180
2SA2151A
Audio, general-purpose
230
230
15
160
10
230
50
180
2SA2223
Audio, general-purpose
230
230
15
160
10
230
40
140
2SB1257
60
60
4 (Pulse 6)
25
10
60
2000
2SB1258
100
100
6 (Pulse 10)
30
10
100
1000
2SB1259
120
120
10 (Pulse 15)
30
10
120
2000
2SB1351
60
60
12 (Pulse 20)
30
10
60
2000
10
2SB1382
120
120
16 (Pulse 26)
75
10
120
2000
2SB1383
120
120
25 (Pulse 40)
120
10
120
2000
12
2SB1420
120
120
16 (Pulse 26)
80
10
120
2000
2SB1559
160
150
80
100
160
5000
30000
2SB1560
160
150
10
100
100
160
5000
30000
2SB1570
160
150
12
150
100
160
5000
30000
2SB1587
160
150
75
100
160
5000
30000
2SB1588
160
150
10
80
100
160
5000
30000
2SB1647
150
150
15
130
100
150
5000
30000
10
2SB1648
150
150
17
200
100
150
5000
30000
10
2SB1649
150
150
15
85
100
150
5000
30000
10
160
Transistors
2-1 Transistors
Electrical Characteristics
VBE (sat)
Conditions
(V)
(V)
Ic
IB
max
max
(A)
(A)
VCE (sat)
MHz
fT
Conditions
VCE
IE
(V)
(A)
Mass
ton
Switching Time
tstg
tf
(S)
(S)
(S)
Cob
Complementary
Package
(g)
(pF)
2.0
0.5
60
12
0.25typ
0.8typ
0.2typ
110typ
2SC2837
TO-3P (MT-100)
6.0
2.0
0.5
50
12
0.25typ
0.85typ
0.2typ
400typ
2SC2921
MT-200
18.4
2.0
0.8
40
12
0.3typ
0.7typ
0.2typ
500typ
2SC2922
MT-200
18.4
2.0
0.5
35
12
0.35typ
1.5typ
0.3typ
500typ
2SC3263
TO-3P (MT-100)
6.0
2.0
0.5
35
12
0.35typ
1.5typ
0.3typ
500typ
2SC3264
MT-200
18.4
2.0
0.5
50
12
0.25typ
0.85typ
0.2typ
400typ
2SC3284
TO-3P (MT-100)
6.0
2.0
0.5
40
12
0.3typ
0.7typ
0.2typ
500typ
2SC3519
TO-3P (MT-100)
6.0
2.0
0.5
40
12
0.3typ
0.7typ
0.2typ
500typ
2SC3519A
TO-3P (MT-100)
6.0
0.5
0.2
15
12
0.2
0.25typ
0.75typ
0.25typ
90typ
2SC3851
TO-220F (FM20)
2.0
0.5
0.2
15
12
0.2
0.25typ
0.75typ
0.25typ
90typ
2SC3851A
TO-220F (FM20)
2.0
2.0
0.5
20
12
0.5
0.6typ
0.9typ
0.2typ
500typ
2SC3856
TO-3P (MT-100)
6.0
3.0
10
20
12
0.5
0.3typ
0.9typ
0.2typ
400typ
2SC3857
MT-200
18.4
2SC3858
2.5
10
20
12
0.6typ
0.9typ
0.2typ
500typ
MT-200
18.4
0.35
0.3
40
12
0.5
0.4typ
0.4typ
0.2typ
330typ
TO-220F (FM20)
2.0
0.35
0.3
40
12
0.5
0.4typ
0.4typ
0.2typ
330typ
TO-220F (FM20)
2.0
1.0
0.7
0.07
20
12
0.2
0.4typ
1.5typ
0.5typ
60typ
TO-220F (FM20)
2.0
1.0
0.7
0.07
20
12
0.2
0.4typ
1.5typ
0.5typ
60typ
2SC4382
TO-220F (FM20)
2.0
2.0
0.5
20
12
0.5
0.6typ
0.9typ
0.2typ
500typ
2SC4388
TO-3PF (FM100)
6.5
1.5
0.2
20
12
0.5
0.18typ
1.1typ
0.21typ
150typ
2SC4466
TO-3P (MT-100)
6.0
1.5
0.3
20
12
0.5
0.14typ
1.4typ
0.21typ
300typ
2SC4467
TO-3P (MT-100)
6.0
0.5
0.5
20
12
0.5
0.17typ
1.86typ
0.27typ
400typ
2SC4468
TO-3P (MT-100)
6.0
0.5
0.2
20
12
0.5
0.18typ
1.1typ
0.21typ
150typ
2SC4511
TO-220F (FM20)
2.0
0.08
25
12
0.5typ
0.6typ
0.3typ
400typ
TO-3PF (FM100)
6.5
1.0
0.7
0.07
60
12
0.7
0.5typ
1typ
0.5typ
30typ
2SC4883
TO-220F (FM20)
2.0
1.0
0.7
0.07
60
12
0.7
0.5typ
1typ
0.5typ
30typ
2SC4883A
TO-220F (FM20)
2.0
2.0
0.5
50
12
0.25typ
0.85typ
0.2typ
400typ
2SC4886
TO-3PF (FM100)
6.5
0.5
12
0.2
20
12
0.5
0.18typ
1.1typ
0.21typ
150typ
2SC5099
TO-3PF (FM100)
6.5
0.5
0.3
20
12
0.5
0.14typ
1.4typ
0.21typ
300typ
2SC5100
TO-3PF (FM100)
6.5
0.5
0.5
20
12
0.5
0.17typ
1.86typ
0.27typ
400typ
2SC5101
TO-3PF (FM100)
6.5
0.5
0.5
20
12
0.5
450typ
2SC6011
TO-3P (MT-100)
6.0
0.5
0.5
20
12
0.5
450typ
2SC6011A
TO-3P (MT-100)
6.0
0.5
0.5
35
12
500typ
2SC6145
TP-3P (MT-100)
6.0
0.5
1.2
2SC4381
1.5
2.0
0.006
200
12
0.2
0.4typ
0.8typ
0.6typ
75typ
2SD2014
TO-220F (FM20)
2.0
1.5
2.0
0.006
100
12
0.2
0.6typ
1.6typ
0.5typ
100typ
2SD1785
TO-220F (FM20)
2.0
1.5
2.0
0.01
100
12
0.2
0.6typ
1.6typ
0.5typ
145typ
2SD2081
TO-220F (FM20)
2.0
1.5
2.0
10
0.02
130
12
0.7typ
1.5typ
0.6typ
170typ
TO-220F (FM20)
2.0
1.5
2.5
0.016
50
12
0.8typ
1.8typ
1typ
350typ
2SD2082
TO-3PF (FM100)
6.5
1.8
2.5
12
0.024
50
12
1typ
3typ
1typ
230typ
2SD2083
1.5
2.5
0.016
50
12
1typ
3typ
1typ
350typ
2.5
3.0
0.006
65
12
0.7typ
3.6typ
0.9typ
160typ
2.5
3.0
0.007
50
12
0.8typ
3typ
1.2typ
2.5
3.0
0.007
50
12
0.8typ
3typ
2.5
3.0
0.006
65
12
0.7typ
2.5
3.0
0.007
50
12
0.8typ
2.5
3.0
10
0.01
45
12
2.5
3.0
10
0.01
45
12
2.5
3.0
10
0.01
45
12
TO-3P (MT-100)
6.0
TO-3P (MT-100)
6.0
2SD2389
TO-3P (MT-100)
6.0
230typ
2SD2390
TO-3P (MT-100)
6.0
1.2typ
230typ
2SD2401
MT-200
18.4
3.6typ
0.9typ
160typ
2SD2438
TO-3PF (FM100)
6.5
3typ
1.2typ
230typ
2SD2439
TO-3PF (FM100)
6.5
0.7typ
1.6typ
1.1typ
320typ
2SD2560
TO-3P (MT-100)
6.0
0.7typ
1.6typ
1.1typ
320typ
2SD2561
MT-200
18.4
0.7typ
1.6typ
1.1typ
320typ
2SD2562
TO-3PF (FM100)
6.5
Transistors
161
2-1 Transistors
Applications
VCBO
VCEO
Ic
Pc
(V)
(V)
(A)
(W)
ICBO
Conditions
VCB
(A)
(V)
hFE
min
Conditions
VCE
Ic
(V)
(A)
max
2SC2837
Audio, general-purpose
150
150
10
100
100
150
50
180
2SC2921
Audio, general-purpose
160
160
15
150
100
160
50
180
2SC2922
Audio, general-purpose
180
180
17
200
100
180
30
180
2SC3263
Audio, general-purpose
230
230
15
130
100
230
50
140
2SC3264
Audio, general-purpose
230
230
17
200
100
230
50
140
2SC3284
Audio, general-purpose
150
150
14
125
100
150
50
180
2SC3519
Audio, general-purpose
160
160
15
130
100
160
50
180
2SC3519A
Audio, general-purpose
180
180
15
130
100
180
50
180
2SC3835
200
120
7 (Pulse 14)
70
100
200
70
220
2SC3851
80
60
25
100
80
40
320
2SC3851A
100
80
25
100
100
40
320
2SC3852
80
60
25
10
80
500
0.5
0.5
2SC3852A
100
80
25
10
100
500
2SC3856
Audio, general-purpose
200
180
15
130
100
200
80
180
2SC3857
Audio, general-purpose
200
200
15
150
100
200
50
180
2SC3858
Audio, general-purpose
200
200
17
200
100
200
50
180
2SC3927
900
550
10 (Pulse 15)
120
100
800
10
28
2SC4024
100
50
10
35
100
100
300
1600
2SC4131
100
50
15 (Pulse 20)
60
10
100
60
360
2SC4138
500
400
10 (Pulse 20)
80
100
500
10
30
2SC4140
500
400
18 (Pulse 36)
130
100
500
10
30
10
2SC4153
200
120
7 (Pulse 14)
30
100
200
70
220
2SC4300
900
800
5 (Pulse 10)
75
100
800
10
30
2SC4301
900
800
7 (Pulse 14)
80
100
800
10
30
2SC4304
900
800
3 (Pulse 6)
35
100
800
10
30
0.7
2SC4381
150
150
25
10
150
60
10
0.7
2SC4382
200
200
25
10
200
60
10
0.7
2SC4388
Audio, general-purpose
200
180
15
85
10
200
50
180
2SC4445
900
800
3 (Pulse 6)
60
100
800
10
30
0.7
2SC4466
Audio, general-purpose
120
80
60
10
120
50
180
2SC4467
Audio, general-purpose
160
120
80
10
160
50
180
2SC4468
Audio, general-purpose
200
140
10
100
10
200
50
180
2SC4495
80
50
25
10
80
500
0.5
2SC4511
Audio, general-purpose
120
80
30
10
120
50
180
2SC4518
900
550
5 (Pulse 10)
35
100
800
10
25
1.8
2SC4518A
1000
550
5 (Pulse 10)
35
100
800
10
25
1.8
2SC4546
600
400
7 (Pulse 14)
30
100
600
10
25
2SC4706
900
600
14 (Pulse 28)
130
100
800
10
25
2SC4883
150
150
20
10
150
60
240
10
0.7
2SC4883A
180
180
20
10
180
60
240
10
0.7
2SC4886
Audio, general-purpose
150
150
14
80
100
150
50
180
2SC5071
500
400
12 (Pulse 24)
100
100
500
10
30
2SC5099
Audio, general-purpose
120
80
60
10
120
50
180
2SC5100
Audio, general-purpose
160
120
75
10
160
50
180
2SC5101
Audio, general-purpose
200
140
10
80
10
200
50
180
2SC5130
600
400
5 (Pulse 10)
30
100
500
10
30
1.5
2SC5287
900
550
5 (Pulse 10)
80
100
800
10
25
1.8
2SC6011
Audio, general-purpose
200
200
15
160
10
200
50
180
2SC6011A
Audio, general-purpose
230
230
15
160
10
230
50
180
2SC6145
Audio, general-purpose
230
230
15
160
10
230
40
140
162
Transistors
2-1 Transistors
Electrical Characteristics
VBE (sat)
Conditions
(V)
(V)
Ic
IB
max
max
(A)
(A)
VCE (sat)
MHz
fT
Conditions
VCE
IE
(V)
(A)
Mass
ton
Switching Time
tstg
tf
(S)
(S)
(S)
Cob
Complementary
Package
(g)
(pF)
2.0
0.5
70
12
0.2typ
1.4typ
0.35typ
60typ
2SA1186
TO-3P (MT-100)
6.0
2.0
0.5
60
12
0.2typ
1.5typ
0.35typ
200typ
2SA1215
MT-200
18.4
2.0
0.8
50
12
0.2typ
1.3typ
0.45typ
250typ
2SA1216
MT-200
18.4
2.0
0.5
60
12
0.3typ
2.4typ
0.5typ
250typ
2SA1294
TO-3P (MT-100)
6.0
2.0
0.5
60
12
0.3typ
2.4typ
0.5typ
250typ
2SA1295
MT-200
18.4
2.0
0.5
60
12
0.2typ
1.5typ
0.35typ
200typ
2SA1303
TO-3P (MT-100)
6.0
2.0
0.5
50
12
0.2typ
1.3typ
0.45typ
250typ
2SA1386
TO-3P (MT-100)
6.0
2.0
0.5
50
12
0.2typ
1.3typ
0.45typ
250typ
2SA1386A
TO-3P (MT-100)
6.0
0.3
30
12
0.5
0.5max
3max
0.5max
110typ
TO-3P (MT-100)
6.0
0.5
0.2
15
12
0.2
0.2typ
1typ
0.3typ
60typ
2SA1488
TO-220F (FM20)
2.0
0.5
0.2
15
12
0.2
0.2typ
1typ
0.3typ
60typ
2SA1488A
TO-220F (FM20)
2.0
0.5
0.05
15
12
0.2
0.8typ
3typ
1.2typ
50typ
TO-220F (FM20)
2.0
0.5
0.05
15
12
0.2
0.8typ
3typ
1.2typ
50typ
TO-220F (FM20)
2.0
2.0
0.5
20
12
0.5
0.5typ
1.8typ
0.6typ
300typ
2SA1492
TO-3P (MT-100)
6.0
3.0
10
20
12
0.5
0.3typ
2.4typ
0.4typ
250typ
2SA1493
MT-200
18.4
10
20
12
0.5typ
1.8typ
0.6typ
300typ
2SA1494
MT-200
18.4
12
1max
5max
0.5max
105typ
TO-3P (MT-100)
6.0
0.1
24
12
0.5
0.5typ
2typ
0.5typ
150typ
TO-220F (FM20)
2.0
0.5
1.2
2.5
0.5
1.2
0.5
0.5
1.2
0.08
18
12
0.5typ
2typ
0.4typ
210typ
TO-3PF (FM100)
6.5
0.5
1.3
1.2
10
12
0.7
1max
3max
0.5max
85typ
TO-3P (MT-100)
6.0
0.5
1.3
10
10
12
2.0
1max
3max
0.5max
165typ
TO-3P (MT-100)
6.0
0.5
1.2
0.3
30
12
0.5
0.5max
3max
0.5max
110typ
TO-220F (FM20)
2.0
0.5
1.2
0.4
12
0.5
1max
5max
1max
75typ
TO-3PF (FM100)
6.5
0.5
1.2
0.6
12
1max
5max
1max
105typ
TO-3PF (FM100)
6.5
0.5
1.2
0.14
15
12
0.3
0.7max
4max
0.7max
50typ
TO-220F (FM20)
2.0
1.0
0.07
15
12
0.2
1typ
3typ
1.5typ
35
2SA1667
TO-220F (FM20)
2.0
1.0
0.07
15
12
0.2
1typ
3typ
1.5typ
35
2SA1668
TO-220F (FM20)
2.0
2.0
0.5
20
12
0.5
0.5max
1.8max
0.6max
300
2SA1673
TO-3PF (FM100)
6.5
0.7
0.14
15
12
0.3
0.7max
4max
0.7max
50
TO-3PF (FM100)
6.5
1.5
0.2
20
12
0.5
0.16typ
2.6typ
0.34typ
110
2SA1693
TO-3P (MT-100)
6.0
1.5
0.3
20
12
0.5
0.13typ
3.5typ
0.32typ
200
2SA1694
TO-3P (MT-100)
6.0
0.5
0.5
20
12
0.5
0.24typ
4.32typ
0.4typ
250
2SA1695
0.5
0.02
40
12
0.1
0.45typ
1.6typ
0.85typ
30
0.5
0.2
20
12
0.5
0.16typ
2.6typ
0.34typ
110
0.5
1.2
2SA1725
TO-3P (MT-100)
6.0
TO-220F (FM20)
2.0
TO-220F (FM20)
2.0
0.5
1.2
1.8
0.36
12
0.35
0.7max
4max
0.5max
50
TO-220F (FM20)
2.0
0.5
1.2
1.8
0.36
12
0.35
0.7max
4max
0.5max
50
TO-220F (FM20)
2.0
0.7
1.3
0.6
10
12
0.5
0.5max
2max
0.15max
55
TO-220F (FM20)
2.0
0.5
1.2
1.4
12
1.5
1max
5max
0.7max
160
TO-3P (MT-100)
6.0
1.0
0.7
0.07
120
12
0.7
0.5typ
1.5typ
0.5typ
30
2SA1859
TO-220F (FM20)
2.0
1.0
0.7
0.07
120
12
0.7
0.5typ
1.5typ
0.5typ
30
2SA1859A
TO-220F (FM20)
2.0
2.0
0.5
60
12
0.26typ
1.5typ
0.35typ
200
2SA1860
TO-3PF (FM100)
6.5
1.4
10
12
1max
3max
0.5max
105
TO-3P (MT-100)
6.0
0.5
0.2
20
12
0.5
0.16typ
2.6typ
0.34typ
110
2SA1907
TO-3PF (FM100)
6.5
0.5
0.3
20
12
0.5
0.13typ
3.5typ
0.32typ
200
2SA1908
TO-3PF (FM100)
6.5
0.5
0.5
20
12
0.5
0.24typ
4.32typ
0.4typ
250
2SA1909
TO-3PF (FM100)
6.5
0.5
1.3
0.5
1.3
1.5
0.3
20
12
0.3
1max
2max
0.3max
30
TO-220F (FM20)
2.0
0.5
1.2
1.8
0.36
12
0.35
0.7max
4max
0.5max
50
TO-3P (MT-100)
6.0
0.5
0.5
20
12
0.5
270
2SA2151
TO-3P (MT-100)
6.0
0.5
0.5
20
12
0.5
270
2SA2151A
TO-3P (MT-100)
6.0
0.5
0.5
60
12
250
2SA2223
TP-3P (MT-100)
6.0
Transistors
163
2-1 Transistors
Applications
VCBO
VCEO
Ic
Pc
(V)
(V)
(A)
(W)
2SD1785
2SD1796
2SD2014
2SD2015
2SD2016
2SD2017
300
2SD2045
120
2SD2081
120
2SD2082
120
2SD2083
2SD2141
2SD2389
ICBO
Conditions
VCB
(A)
(V)
hFE
min
max
Conditions
VCE
Ic
(V)
(A)
120
120
6 (Pulse 10)
30
10
120
2000
6010
6010
25
10
50
2000
120
80
25
10
120
2000
150
120
25
10
150
2000
200
200
25
10
200
1000
250
35
100
300
2000
120
6 (Pulse 10)
50
10
120
2000
120
10 (Pulse 15)
30
10
120
2000
120
16 (Pulse 26)
75
10
120
2000
15000
120
120
25 (Pulse 40)
120
10
120
2000
12
38050
38050
6 (Pulse 10)
35
10
330
1500
160
150
80
100
160
5000
30000
2SD2390
160
150
10
100
100
160
5000
30000
2SD2401
160
150
12
150
100
160
5000
30000
2SD2438
160
150
75
100
160
5000
30000
2SD2439
160
150
10
80
100
160
5000
30000
2SD2560
150
150
15
130
100
150
5000
30000
10
2SD2561
150
150
17
200
100
150
5000
30000
10
2SD2562
150
150
15
85
100
150
5000
30000
10
2SD2641
110
110
60
100
110
5000
30000
2SD2642
110
110
30
100
110
5000
30000
2SD2643
110
110
60
100
110
5000
30000
STD01N
Audio
150
150
10
100
100
150
5000
20000
STD01P
Audio
150
150
10
100
100
150
5000
20000
STD03N
Audio
160
160
15
160
100
160
5000
20000
10
STD03P
Audio
160
160
15
160
100
160
5000
20000
10
164
Transistors
2-1 Transistors
Electrical Characteristics
VBE (sat)
Conditions
(V)
(V)
Ic
IB
max
max
(A)
(A)
VCE (sat)
MHz
fT
Conditions
VCE
IE
(V)
(A)
Mass
ton
Switching Time
tstg
tf
(S)
(S)
(S)
Cob
Complementary
Package
(g)
(pF)
1.5
3mA
100
12
0.1
0.5typ
5.5typ
1.5typ
70
1.5
10mA
60
12
0.2
1typ
4typ
1.5typ
45
2SB1258
2.0
2.0
1.5
2.0
3mA
75
12
0.1
1typ
4typ
1.5typ
45
TO-220F (FM20)
2.0
1.5
2.0
2mA
40
12
0.1
0.6typ
5typ
2typ
40
TO-220F (FM20)
2.0
1.5
2.0
1.5mA
90
12
0.1
40
TO-220F (FM20)
2.0
1.5
2.0
2mA
20
12
0.6typ
16typ
3typ
65
TO-220F (FM20)
2.0
1.5
2.0
3mA
50
12
0.5typ
5.5typ
1.5typ
70
TO-3PF (FM100)
6.5
1.5
2.0
5mA
60
12
0.5
1.5
2.5
16mA
20
12
0.6typ
7typ
1.8
2.5
12
24mA
20
12
1typ
6typ
20mA
20
12
0.5
1.5
2SB1257
TO-220F (FM20)
TO-220F (FM20)
95
2SB1259
TO-220F (FM20)
2.0
1.5typ
210
2SB1382
TO-3PF (FM100)
6.5
1typ
340
2SB1383
95
TO-3P (MT-100)
6.0
TO-220F (FM20)
2.0
6.0
2.5
3.0
6mA
80
12
0.6typ
10typ
0.9typ
85
2SB1559
TO-3P (MT-100)
2.5
3.0
7mA
55
12
0.5typ
10typ
1.1typ
95
2SB1560
TO-3P (MT-100)
6.0
2.5
3.0
7mA
55
12
0.5typ
10typ
1.1typ
95
2SB1570
MT-200
18.4
2.5
3.0
6mA
80
12
0.6typ
10typ
0.9typ
85
2SB1587
TO-3PF (FM100)
6.5
2.5
3.0
7mA
55
12
0.5typ
10typ
1.1typ
95
2SB1588
TO-3PF (FM100)
6.5
2.5
3.0
10
10mA
70
12
0.8typ
4typ
1.2typ
120
2SB1647
TO-3P (MT-100)
6.0
2.5
3.0
10
10mA
70
12
0.8typ
4typ
1.2typ
120
2SB1648
MT-200
18.4
2.5
3.0
10
10mA
70
12
0.8typ
4typ
1.2typ
120
2SB1649
TO-3PF (FM100)
6.5
2.5
3.0
5mA
60
12
0.8typ
6.2typ
1.1typ
55
TO-3P (MT-100)
6.0
2.5
3.0
5mA
60
12
0.5
0.8typ
6.2typ
1.1typ
55
TO-220F (FM20)
2.0
2.5
3.0
5mA
60
12
0.5
0.8typ
6.2typ
1.1typ
55
TO-3PF (FM100)
6.5
2.0
2.5
6mA
STD01P
TO3P-5Pin
6.2
2.0
2.5
6mA
STD01N
TO3P-5Pin
6.2
2.0
2.5
10
10mA
STD03P
TO-3P-5pin
6.2
2.0
2.5
10
10mA
STD03N
TO-3P-5pin
6.2
Transistors
165
166
Transistors
Selection Guide
By VDSS
VDSS
RDS (ON)
ID
PD
(V)
() max
(A)
(W)
Part Number
Package
3.6m
100
100
SKH04100
TO263 (Surface-mount)
3.8m
100
100
EKH04100
TO220
3.8m
70
40
FKH0470
TO220F-A
6.0m
70
80
2SK3800
TO220S (Surface-mount)
6.0m
70
100
2SK3801
TO3P (MT100)
9m
60
60
FKV460S
TO220S (Surface-mount)
10m
75
40
FKV575
TO220F (FM20)
15m
50
35
FKV550N
TO220F (FM20)
15m
50
85
EKV550
TO220
4.8m
100
100
SKH06100
TO263 (Surface-mount)
5.0m
100
100
EKH06100
TO220
5.0m
60
40
FKH0660
TO220F-A
6.0m
70
90
2SK3710
TO220S (Surface-mount)
6.0m
70
130
2SK3711
TO3P (MT100)
14m
60
60
FKV660S
TO220S (Surface-mount)
28m
30
40
2SK2420
TO220F (FM20)
11.3m
70
100
SKH1070
TO263 (Surface-mount)
11.5m
70
100
EKH1070
TO220
11.5m
40
40
FKH1040
TO220F-A
52m
20
55
EKG1020
TO220
52m
20
40
FKG1020
TO220F-A
53m
45
40
FKP202
TO220F (FM20)
53m
45
95
SKP202
TO263 (Surface-mount)
0.175
18
35
2SK3003
TO220F (FM20)
43m
50
85
FKP250A
TO3PF (FM100)
75m
25
40
FKP252
TO220F (FM20)
95m
20
40
FKP253
TO220F (FM20)
95m
20
90
SKP253
TO263 (Surface-mount)
0.25
18
35
2SK3004
TO220F (FM20)
280
53m
40
85
FKP280A
TO3PF (FM100)
300
65m
30
85
FKP300A
TO3PF (FM100)
330
63m
30
85
FKP330C
TO3PF (FM100)
1.1
35
2SK2701A
TO220F (FM20)
2.8
30
2SK2803
TO220F (FM20)
0.27
20
150
MKS5020
TO3P
0.4
15
150
MKS5015
TO3P
1.5
30
2SK3199
TO220F (FM20)
600
3.8
30
2SK2848
TO220F (FM20)
900
5.0
30
2SK2943
TO220F (FM20)
40
50
60
100
200
250
450
500
Transistors
167
2SK2420
VDSS
VGSS
ID
ID (pulse)
PD
(V)
(V)
(A)
(A)
(W)
IGSS
EAS
(mJ)
(nA)
max
VTH
IDSS
Conditions
VGS
(V)
(A)
min
max
Conditions
VDS
(V)
(V)
min
max
Conditions
VDS
ID
(V)
(A)
60
20
30
120
40
38
100
20
100
60
2.0
4.0
10
250
2SK2701A
450
30
28
35
130
100
30
100
450
2.0
4.0
10
1m
2SK2803
450
30
12
30
30
100
30
100
450
2.0
4.0
10
1m
2SK2848
600
30
30
10
100
30
100
600
2.0
4.0
10
250
2SK2943
900
30
12
30
60
100
30
100
900
2.0
4.0
10
1m
2SK3003
200
20
18
72
35
120
100
20
100
200
2.0
4.0
10
1m
2SK3004
250
20
18
72
35
120
100
20
100
250
2.0
4.0
10
1m
2SK3199
500
30
20
30
35
100
30
100
500
2.0
4.0
10
1m
2SK3710
60
20
70
140
90
468
10
15
100
60
2.0
4.0
10
1m
2SK3711
60
20
70
140
130
10
+15
100
60
2.0
4.0
10
1m
2SK3800
40
20
70
140
80
400
10
15
100
40
2.0
4.0
10
1m
2SK3801
40
20
70
140
100
400
10
15
100
40
2.0
4.0
10
1m
EKG1020
100
20
20
60
55
50
10
20
100
100
1.5
2.5
10
1m
EKH04100
40
20
100
200
100
300
20
15
100
40
2.0
4.0
10
1m
EKH06100
60
20
100
200
100
300
20
15
100
60
2.0
4.0
10
1m
EKH1070
100
20
70
200
100
300
20
15
100
100
2.0
4.0
10
1m
50
20
50
150
85
150
10
20
100
50
3.0
4.2
10
250
FKG1020
100
20
20
60
40
50
10
20
100
100
1.5
2.5
10
1m
FKH0470
40
20
70
200
40
300
20
15
100
40
2.0
4.0
10
1m
FKH0660
60
20
60
200
40
300
20
15
100
60
2.0
4.0
10
1m
FKH1040
100
20
40
200
40
300
20
15
100
100
2.0
4.0
10
1m
FKP202
200
30
45
180
40
200
100
30
100
200
3.0
4.5
10
1m
FKP250A
250
30
50
200
85
400
100
30
100
250
3.0
4.5
10
1m
FKP252
250
30
25
100
40
200
100
30
100
250
3.0
4.5
10
1m
FKP253
250
30
20
80
40
160
100
30
100
250
3.0
4.5
10
1m
FKP280A
280
30
40
160
85
400
100
30
100
280
3.0
4.5
10
1m
FKP300A
300
30
30
120
85
400
100
30
100
300
3.0
4.5
10
1m
FKP330C
330
30
30
120
85
500
100
30
100
330
3.0
4.5
10
1m
EKV550
FKV460S
40
+20, 10
60
180
60
+10, 5
+20, 10
100
40
1.0
2.5
10
250
FKV550N
50
20
50
150
35
150
10
20
100
50
3.0
4.2
10
250
FKV575
50
20
75
200
40
300
100
20
100
50
3.0
4.5
10
250
FKV660S
60
+20, 10
60
180
60
+10, 5
+20, 10
100
60
1.0
2.5
10
250
MKS5015
500
30
15
30
150
125
100
30
100
500
2.0
4.0
10
1m
MKS5020
500
30
20
40
150
200
100
30
100
500
2.0
4.0
10
1m
SKH04100
40
20
100
200
100
300
20
15
100
40
2.0
4.0
10
1m
SKH06100
60
20
100
200
100
300
20
15
100
60
2.0
4.0
10
1m
SKH1070
100
20
70
200
100
300
20
15
100
100
2.0
4.0
10
1m
SKP202
200
30
45
180
95
200
100
30
100
200
3.0
4.5
10
1m
SKP253
250
30
20
80
40
160
100
30
100
250
3.0
4.5
10
1m
168
Transistors
Electrical Characteristics
Re (yfs)
Conditions
ID
VDS
(S)
typ
(V)
(A)
min
13
20
10
Ciss
(pF)
typ
15
Crss
(pF)
typ
2200
Mass
RDS (ON)
Conditions
VGS
VDS
(V)
(V)
0
Conditions
VGS
ID
(V)
(A)
()
typ
max
()
typ
max
Conditions
ID
VGS
(V)
(A)
Package
(g)
25
21m
28m
10
15
TO220F(FM20)
2.0
3.5
20
3.5
720
62
10
0.84
1.1
10
3.5
TO220F(FM20)
2.0
1.5
2.1
20
1.5
340
26
10
2.1
2.8
10
1.5
TO220F(FM20)
2.0
1.2
1.7
20
290
30
10
3.8
10
TO220F(FM20)
2.0
1.8
2.8
20
1.5
600
40
10
10
1.5
TO220F(FM20)
2.0
11
10
850
250
10
130m
175m
10
TO220F(FM20)
2.0
11
10
850
250
10
0.2
0.25
10
TO220F(FM20)
2.0
3.5
5.2
20
2.5
650
110
10
1.2
1.5
10
2.5
TO220F(FM20)
2.0
30
80
10
35
8000
1000
10
5m
6m
10
35
TO220S(Surface-mount) 1.5
30
80
10
35
8000
1000
10
5m
6m
10
35
TO3P(MT100)
30
50
10
35
5100
860
10
5m
6m
10
35
TO220S(Surface-mount) 1.5
30
50
10
35
5100
860
10
5m
6m
10
35
10
10
2200
210
10
41m
52m
10
10
140
10
50 11500
1800
10
3m
3.8m
10
140
10
50 11500
1100
10
3.8m
5m
TO3P(MT100)
6.0
6.0
10 TO220
2.0
50
TO220
2.0
10
50
TO220
2.0
45m
49m
4.5
10
35 11500
780
10
8.8m
11.5m
10
35
TO220
2.0
17
10
25
2000
500
10
12m
15m
10
25
TO220
2.0
10
10
2200
210
10
41m
52m
10
10
10 TO220F-A
2.0
140
10
50 11500
1800
10
3m
3.8m
10
50
TO220F-A
2.0
140
10
50 11500
1100
10
3.8m
5m
10
50
TO220F-A
2.0
120
10
35 11500
780
10
8.8m
11.5m
10
35
TO220F-A
2.0
18
28
10
22
2000
80
25
45m
53m
10
22
TO220F(FM20)
2.0
30
42
10
25
3800
210
25
37m
43m
10
25
TO3PF(FM100)
6.5
13
21
10
12
2000
70
25
68m
75m
10
12
TO220F(FM20)
2.0
17
10
10
1600
50
25
86m
95m
10
10
TO220F(FM20)
2.0
25
38
10
20
3800
190
25
46m
53m
10
20
TO3PF(FM100)
6.5
20
33
10
15
3800
180
25
57m
65m
10
15
TO3PF(FM100)
6.5
23
37
10
15
4600
220
25
50m
63m
10
15
TO3PF(FM100)
6.5
20
10
25
2800
600
10
7m
9m
10
25
TO220S(Surface-mount) 1.5
17
10
25
2000
500
10
12m
15m
10
25
TO220F(FM20)
2.0
30
10
37
3200
750
10
7m
10m
10
37
TO220F(FM20)
2.0
20
10
25
2500
150
10
11m
14m
10
25
TO220S(Surface-mount) 1.5
10
7.5
2000
900
10
0.3
0.4
10
7.5
TO3P
6.0
10
10
3300
1500
10
0.21
0.27
10
10
TO3P
6.0
140
10
50 11500
1800
10
2.8m
3.6m
10
50
TO263(Surface-mount)
1.5
140
10
50 11500
1100
10
3.6m
4.8m
10
50
TO263(Surface-mount)
1.5
120
45m
49m
4.5
120
10
35 11500
780
10
8.6m
11.3m
10
35
TO263(Surface-mount)
1.5
18
28
10
22
2000
80
25
45m
53m
10
22
TO263(Surface-mount)
1.5
17
10
10
1600
50
25
86m
95m
10
10
TO263(Surface-mount)
1.5
Transistors
169
170
Transistors
2-3 IGBT
Selection Guide
By VCES
VCES
(V)
600
IC
(A)
25
30
30
50
50
PC
(W)
60
60
60
150
150
Part Number
Package
FGM622S
FGM603
FGM623S
MGD623N
MGD623S
TO3PF(FM100)
TO3PF(FM100)
TO3PF(FM100)
TO3P(MT100)
TO3P(MT100)
Transistors
171
2-3 IGBT
VCES
VGE
IC
IC(pulse)
PC
(Ta=25C)
(V)
(V)
(A)
(A)
(W)
IGES
ICES
VGE(th)
Conditions
Conditions
Conditions
(nA)
(V)
VGE (A)
VCE
IC
VCE
max
min
max (mA) (V)
(V) max
(V)
VCE(sat)
Conditions
(V)
IC
VGE
typ
max
(A)
(V)
(pF)
typ
(pF)
typ
Conditions
VGE
VCE
(V)
(V)
FGM603
600
20
30
90
60
100
20
100
600
10
1.6
2.0
30
15
4600
110
80
20
FGM622S
600
30
25
75
60
500
30
100
600
10
1.7
1.9
25
15
1300
80
40
20
FGM623S
600
30
30
100
60
500
30
100
600
10
1.5
1.7
30
15
2500
150
80
20
MGD623N
600
30
50
100
150
100
30
100
600
10
1.7
2.3
50
15
2500
150
80
20
MGD623S
600
30
50
100
150
100
30
100
600
10
1.8
2.4
50
15
2500
150
80
20
172
Transistors
2-3 IGBT
(ns)
typ
(ns)
typ
(ns)
typ
Qg
IC
(A)
Conditions
VCE
(V)
(nC)
typ
Qge
(nC)
typ
Qgc
(nC)
typ
VF
IC
(A)
Conditions
VCE
VGE
(V)
(V)
(V)
typ
Mass
trr
Conditions
IF
(s)
(A)
typ
max
Conditions
IF
di/dt
(A) (A/s)
Package
(g)
130
70
340
200
30
300 L Load
120
30
30
30
300
15
TO3PF(FM100) 6.5
50
60
200
120
25
300 L Load
40
10
10
25
300
15
TO3PF(FM100) 6.5
100
80
300
120
30
300 L Load
65
20
20
30
300
15
75
70
250
200
50
300 L Load
65
15
20
50
300
15
1.2
1.6
30
0.3
30
100 TO3P(MT100)
6.0 Built-in Di
75
70
250
120
50
300 L Load
65
15
20
50
300
15
1.2
1.6
30
0.3
30
100 TO3P(MT100)
6.0 Built-in Di
TO3PF(FM100) 6.5
Transistors
173
Mass (g)
SLA4030
Part Number
100
2000
6.0
SLA4031
120
2000
6.0
SLA4036
120
2000
6.0
SLA4041
200
1000
6.0
SLA4051
120
2000
6.0
SLA4052
120
2000
6.0
SLA4060
120
2000
6.0
SLA4061
120
2000
6.0
SLA4070
100
1000
6.0
SLA4071
100
2000
6.0
SLA4390
H bridge
100
2000
6.0
SLA5037
100
10
0.08
6.0
SLA5041
200
10
0.175
6.0
SLA5059
60
0.55
6.0
SLA5060
60
0.22
6.0
SLA5061
60
10
0.14
6.0
SLA5064
60
10
0.14
6.0
SLA5065
60
0.1
6.0
SLA5068
60
0.1
6.0
SLA5073
60
0.3
6.0
SLA5074
60
0.3
6.0
SLA5075
500
1.4
6.0
SLA5085
60
0.22
6.0
SLA5086
60
0.22
6.0
SLA5096
55
0.08
6.0
SLA5201
600
1.85Vtyp(VCE(sat))
6.0
SLA5212
35
0.07
6.0
SLA5222
1+Di4
600
30
1.3Vtyp(VCE(sat))
6.0
SLA5227
1+Di4
600
30
1.3Vtyp(VCE(sat))
6.0
SLA6012
60
2000
6.0
SLA6020
100
2000
6.0
SLA6022
80
2000
6.0
SLA6023
60
2000
6.0
SLA6024
60
2000
6.0
SLA6026
60
10
2000
6.0
174
Category
Transistors
Circuit Count
IC ID (A)
hFE (min)
Part Number
Category
Circuit Count
IC ID (A)
hFE (min)
Package
Mass (g)
SMA4020
60
2000
SIP12 (SMA12Pin)
4.0
SMA4021
60
2000
SIP12 (SMA12Pin)
4.0
SMA4030
100
2000
SIP12 (SMA12Pin)
4.0
SMA4032
100
2000
SIP12 (SMA12Pin)
4.0
SMA4033
100
2000
SIP12 (SMA12Pin)
4.0
SMA4036
120
2000
SIP15 (SMA15Pin)
4.0
SMA4038
120
2000
SIP15 (SMA15Pin)
4.0
SMA5106
100
0.55
SIP12 (SMA12Pin)
4.0
SMA5112
250
0.5
SIP12 (SMA12Pin)
4.0
SMA5117
250
0.25
SIP12 (SMA12Pin)
4.0
SMA5118
500
1.4
SIP12 (SMA12Pin)
4.0
SMA5125
60
10
0.14
SIP12 (SMA12Pin)
4.0
SMA5127
60
0.55
SIP12 (SMA12Pin)
4.0
SMA5130
250
2.5
0.9
SIP15 (SMA15Pin)
4.0
SMA5131
250
1.8
SIP12 (SMA12Pin)
4.0
SMA5132
500
1.5
SIP12 (SMA12Pin)
4.0
SMA5133
500
2.5
SIP12 (SMA12Pin)
4.0
SMA6010
60
2000
SIP12 (SMA12Pin)
4.0
SMA6080
60
2000
SIP12 (SMA12Pin)
4.0
SMA6511
10015/60
1.5/3
2000
SIP12 (SMA12Pin)
4.0
STA301A
6010
1000
SIP8 (STA8Pin)
2.0
STA302A
50
1000
SIP8 (STA8Pin)
2.0
STA303A
100
1000
SIP8 (STA8Pin)
2.0
STA322A
50
100
SIP8 (STA8Pin)
2.0
STA401A
6010
1000
SIP10 (STA10Pin)
2.6
STA402A
50
1000
SIP10 (STA10Pin)
2.6
STA403A
100
1000
SIP10 (STA10Pin)
2.6
STA404A
200
1000
SIP10 (STA10Pin)
2.6
STA406A
6010
2000
SIP10 (STA10Pin)
2.6
STA408A
120
2000
SIP10 (STA10Pin)
2.6
STA412A
60
300
SIP10 (STA10Pin)
2.6
STA413A
355
500
SIP10 (STA10Pin)
2.6
STA421A
60
40
SIP10 (STA10Pin)
2.6
STA431A
H bridge
60
40
SIP10 (STA10Pin)
2.6
2000
STA434A
H bridge
60
1000
SIP10 (STA10Pin)
2.6
STA457C
H bridge
60
2000
SIP10 (STA10Pin)
2.6
STA460C
6010
700
SIP10 (STA10Pin)
2.6
STA471A
6010
2000
SIP10 (STA10Pin)
2.6
STA472A
60
2000
SIP10 (STA10Pin)
2.6
STA473A
100
2000
SIP10 (STA10Pin)
2.6
STA475A
10015
2000
SIP10 (STA10Pin)
2.6
STA481A
6010
2000
SIP10 (STA10Pin)
2.6
STA485A
10015
2000
SIP10 (STA10Pin)
2.6
Transistors
175
IC (A)/ ID (A)
STA460C
Part Number
Circuit Count
2
6010
hFE (min)
700
RDS(ON)max ()
Equivalent Circuit
1
SIP10 (STA10Pin)
Package
STA301A
6010
1000
SIP8 (STA8Pin)
STA413A
355
500
SIP10 (STA10Pin)
STA481A
6010
2000
SIP10 (STA10Pin)
STA471A
6010
2000
SIP10 (STA10Pin)
STA401A
6010
1000
SIP10 (STA10Pin)
STA406A
6010
2000
SIP10 (STA10Pin)
STA485A
10015
2000
SIP10 (STA10Pin)
STA475A
10015
2000
SIP10 (STA10Pin)
IC (A)/ ID (A)
SMA4033
100
2000
SMA4032
100
2000
SMA5106
100
SLA4031
120
SLA4061
120
SLA4041
200
SMA4036
SLA4036
SMA4038
Part Number
Circuit Count
hFE (min)
RDS(ON)max ()
Equivalent Circuit
Package
SIP12 (SMA12Pin)
SIP12 (SMA12Pin)
SIP12 (SMA12Pin)
2000
2000
1000
120
2000
SIP15 (SMA15Pin)
120
2000
120
2000
SIP15 (SMA15Pin)
SLA4051
120
2000
SLA4052
120
2000
IC (A)/ ID (A)
100
0.55
General-Purpose
Part Number
Circuit Count
STA303A
STA412A
60
STA473A
100
SMA4030
STA403A
SLA4030
hFE (min)
RDS(ON)max ()
Equivalent Circuit
Package
100
300
10
SIP10 (STA10Pin)
2000
14
SIP10 (STA10Pin)
100
2000
12
SIP12 (SMA12Pin)
100
1000
14
SIP10 (STA10Pin)
100
2000
12
SLA5037
100
10
11
SLA4060
120
2000
12
STA404A
200
1000
14
SIP10 (STA10Pin)
SLA5041
200
10
0.175
11
SLA5085
60
0.22
13
176
Transistors
0.08
SIP8 (STA8Pin)
C
21
11
10
13
12
15
14
17
16
19
18
1, 20
Transistors
177
IC (A)/ ID (A)
hFE (min)
RDS(ON)max ()
Equivalent Circuit
Package
SMA4021
60
2000
SIP12 (SMA12Pin)
SLA4071
100
2000
General-Purpose
VCEO (V)/ VDSS (V)
IC (A)/ ID (A)
STA322A
Part Number
50
100
SIP8 (STA8Pin)
STA302A
50
1000
SIP8 (STA8Pin)
STA402A
50
1000
SIP10 (STA10Pin)
STA472A
60
2000
SIP10 (STA10Pin)
STA421A
60
40
SIP10 (STA10Pin)
SMA4020
60
2000
SIP12 (SMA12Pin)
SLA4070
100
1000
STA408A
120
2000
SIP10 (STA10Pin)
SLA5086
60
178
Circuit Count
Transistors
hFE (min)
RDS(ON)max ()
0.22
Equivalent Circuit
Package
7
2
3
8
Transistors
179
Circuit Count
IC (A)/ ID (A)
hFE (min)
RDS(ON)max ()
Equivalent Circuit
Package
STA431A
60
40
SIP10 (STA10Pin)
STA434A
60
1000
SIP10 (STA10Pin)
STA457C
60
2000
SIP10 (STA10Pin)
SLA4390
100
2000
180
Transistors
Transistors
181
Circuit Count VCEO (V)/ VDSS (V)/ VCES (V) IC (A)/ ID (A)
STA303A
100
STA302A
SLA5212
SLA5096
hFE (min)
RDS(ON)max ()
Equivalent Circuit
Package
1000
50
1000
35
70m
13
55
80m
13
SLA5059
60
0.55
SLA5060
60
0.22
SLA5061
60
10
0.14
SLA5064
60
10
0.14
SMA6080
60
2000
SIP12 (SMA12Pin)
SMA6010
60
2000
SIP12 (SMA12Pin)
SLA6012
60
2000
SMA5127
60
SLA6023
60
2000
SLA6024
60
2000
SLA6026
60
10
2000
SMA5125
60
10
SIP12 (SMA12Pin)
SLA6022
80
2000
SLA6020
100
2000
SMA5130
250
2.5
2000
SMA5131
250
SMA5112
250
SMA5117
SMA5132
SMA5133
0.55
0.14
SIP8 (STA8Pin)
SIP8 (STA8Pin)
10
SIP12 (SMA12Pin)
0.9
15
SIP15 (SMA15Pin)
1.8
12
SIP12 (SMA12Pin)
0.5
12
SIP12 (SMA12Pin)
250
0.25
12
SIP12 (SMA12Pin)
500
1.5
12
SIP12 (SMA12Pin)
500
2.5
12
SIP12 (SMA12Pin)
SLA5075
500
1.4
11
SMA5118
500
1.4
12
SIP12 (SMA12Pin)
SLA5201
600
14
Circuit Count
SMA6511
IC (A)/ ID (A)
10015/60
1.5/3
hFE (min)
RDS(ON)max ()
2000
Equivalent Circuit
16
Package
SIP12 (SMA12Pin)
IC (A)/ ID (A)
SLA5074
Part Number
60
0.3
17
SLA5065
60
0.1
17
SLA5073
60
0.3
13
SLA5068
60
0.1
13
182
Circuit Count
Transistors
hFE (min)
RDS(ON)max ()
Equivalent Circuit
Package
Transistors
183
Circuit Count
VCES(V)
IC(A)
VCE(sat)(V)
Equivalent Circuit
Package
SLA5222
1+Di X 4
600
30
1.3typ
SLA5227
1+Di X 4
600
30
1.3typ
184
Transistors
Transistors
185
Transistors
Darlington
Solenoid
Relay
Single
STA301A
STA460C
STA401A
STA413A
MOS FETs
STA406A
STA471A
STA475A
STA481A
STA485A
SLA4031
SMA5106
SLA4041
SLA4060
SMA4032
SMA4033
SMA4036
SLA4071
SMA4021
STA302A
STA322A
STA402A
STA421A
STA408A
STA472A
SLA4070
SMA4020
186
Transistors
Part Number
Applications
Transistors
Darlington
DC Motor
Normal/Reverse
Rotation Control
3-Phase
AC100V Direct Driver
DC Brushless
Motor
STA434A
STA457C
SLA4390
MOS FETs
STA431A
STA474A
STA302A+STA303A
SMA6010
SLA6020
SMA6080
SLA5075
SMA5112
SMA5117
SMA5118
SMA5131
SMA5132
SMA5133
PWM Control
Single
SLA6012
SLA6022
SLA6023
SLA6024
SLA6026
SMA5130
SLA5059
SLA5060
SLA5061
SLA5064
SMA5125
SMA5127
Transistors
187
Part Number
Applications
Transistors
Darlington
Stepping
Motor
Constant Voltage
Driver
STA401A
STA406A
STA435A
STA471A
STA475A
STA481A
STA485A
SLA4010
SMA6511
Bipolar Driver
STA473A
STA472A
STA408A
STA404A
STA403A
STA402A
SMA4030
SMA4020
SLA4070
SLA4060
SLA4030
MOS FETs
Single
STA460C
STA413A
STA421A
STA412A
Part Number
Applications
5-Phase
Motor
188
Transistors
N-CH
SLA5065+SLA5068
SLA5073+SLA5074
SLA5085
P-CH
SLA5086
TO-220F-A
TO-220F (FM20)
9.750.5
2.80.2
15.90.3
9.20.3
(3)
0.15
2.540.2
4.70.2
(1) (2) (3)
TO-3PF (FM100)
TO-3P (MT-100)
3 +0.2
0.1
1.05+0.2
0.1
5.45 0.1
E
0.2
0.8
(16.2)
2 +0.2
0.1
20.0min
3.5
3.30.2
a
b
3.0
3.3
3.2 0.1
a
b
5.5
2.0 0.1
1.6
23.0 0.3
9.5 0.2
4.8 0.2
5.0
9.6 0.2
5.50.2
3.450.2
15.60.2
0.3
0.7
15.6
5.450.1
1.7 +0.2
0.1
0.8
1.750.15
2.150.15
1.05+0.2
0.1
0.65+0.2
0.1
0.65+0.2
0.1
5.450.1
1.5
a: Part Number
b: Lot No.
4.4
3.350.2
1.5
a: Part Number
b: Lot No.
TO-220S
MT-200
6.0 0.2
36.4 0.3
4.440.2
(1.4)
10.20.3
24.4 0.2
2.1
2- 3.2 0.1
1.30.2
+0.2
(1.5)
10.0 0.5
(1.5)
8.60.3
0.1 0.1
2.590.2
1.270.2
+0.2
+0.3
4.1max
1.20.2
3
1.05 +0.2
0.1
5.45 0.1
0.6 +0.2
0.1
10.2+0.3
a: Part Number
b: Lot No.
TO3P-5Pin
NPN
4.80.2
15.60.3
4.500.20
Gate burr
15.60.3
Gate burr
2.540.20
+1.0
20.5 0.5
1.05 +0.2
0.1
(35.4)
1.34 +0.2
0.1
0.50 +0.10
0.05
4xP2.540.1=(10.16)
(Measured at the root)
4xP2.540.6=10.160.8
(Measured at the root)
15.80.2
3max
14.90.2
3.2 0.2
19.90.3
1.74 +0.2
0.1
14.90.2
3max
2.400.20
(R0.30)
1.70.1
(Measured at
the root)
(Including the
solder drip)
0.800.10
2.540.20
0.100.15
2.540.30
1.270.10
(0.75) 2.000.10
9.200.20
4.900.20
1.400.20
15.300.30
+0.1
1.30 +0.10
0.05
PNP
2 +0.2
0.1
(Including pulling
out the burr)
20.2
9.900.20
1.200.20
(0.40)
TO-263
20.2
a: Part Number
b: Polarity
c: Lot No.
2.540.5
q
3.0 +0.3
0.1
5.45 0.1
B
2.540.5
0.40.1
3.0 0.5
0.86 0.1
19.90.3
21.40.3
+0.3
9
a
20.0min
2.40.2
0.5 0.1
100.2
a: Part Number
b: Lot No.
2.0
0.1
2.540.2
2.40.2
2.20.2
19.90.3
4.0
0.5
0.80.1
4.50.2
1.30.2
13.10.5
0.2
3.9
13.0min
0.85+0.2
0.1
0.45+0.2
0.1
2.54
5.45 0.1
B
(1.3)
3.60.2
2.760.2
1.350.15
1.350.15
2.54
9.90.3
(8.7)
18.95MAX
15.870.3
15.80.2
0.8 0.2
0.2
6.680.2
4.0 0.3
2.540.2
3.20.2
3.2
a
b
10.160.3
(1.7)
4.2
C
2.80.2 0.5
10.0
16.0 0.3
8.4 0.2
TO-220 (MT-25)
0.2
0.2
1.34 +0.2
0.1
1.74+0.2
0.1
1.05 +0.2
0.1
4xP2.540.1=(10.16)
(Measured at the root)
4xP2.540.6=10.160.8
(Measured at the root)
+0.2
0.65 0.1
15.80.2
(1)
(2) (3)
10.000.20
1 2 3 4 5
1 2 3 4 5
(Unit : mm)
Transistors
189
SIP 8 (STA8Pin)
SIP 10 (STA10Pin)
9.00.2
11.30.2
b
a
0.50.15
0.50.15
0.50.15
a: Part Number
b: Lot No.
9 2.54 = 22.860.25
7 P2.54 = 17.78
C1.50.5
C1.50.5
4.00.2
1.20.2
(2.54)
0.50.15
(2.54)
1
E
2 3 4 5 6 7
B C B C B C
4.00.2
1.00.25
1.00.25
1.20.2
4.70.5
4.70.5
2.30.2
25.250.2
9.00.2
11.30.2
2.5 max
20.4 max
8 9 10
B C E
Pin No.
SIP 12 (SMA12Pin)
SIP 15 (SMA15Pin)
4.00.2
31.00.2
2.50.2
4.00.2
31.00.2
10.20.2
2.50.2
(10.4)
R-End
+1.0
9.70.5
(3.0) 6.70.5
2.4
10.20.2
b
a
+0.2
0.550.1
1.460.15
+0.2
0.1
0.65
+0.2
0.850.1
2.54
+0.2
0.1
0.55
27.94
+0.2
0.1
* 4.0
1.15
0.7
14 P2.030.7= 28.421.0
0.1
1.2
a: Part Number
b: Lot No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
3.20.15
4.8
1.70.1
2.7
R-End
Pin1
12
+0.2
+0.2
0.650.1
0.850.1
1.2
1.45
0.15
+0.2
0.1
0.55
2.2
+0.2
*
14 P2.03
0.7
0.7
=28.42
1.150.1
1.0
+1.0
9.70.5
2.450.2
(3.0) 6.70.5
13.0
0.15
4.80.2
1.70.1
0.2
9.90.2
13.00.2
0.2
16.00.2
24.40.2
9.5min
16.4
0.2
16.00.2
3.2
31.0
0.15
24.40.2
Ellipse
3.20.15 3.8
0.2
3.20.15 3.8
31.00.2
31.5max
+0.2
0.550.1
* 4.00.7
a: Part Number
b: Lot No.
11 P2.540.7 = 27.941.0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
3.20.15 3.8
4.80.2
1.70.1
17.90.6
(5)
12.90.2
9.90.2
3.20.15
160.2
Gate burr
2.450.2
4(R1)
+0.2
0.650.1
+0.2
30.5
20 P1.430.5=28.61.0
0.550.1
4
31.30.2
0.7
a: Part Number
b: Lot No.
1
3
2
190
Transistors
5
4
7
6
9 11 13 15 17 19 21
8 10 12 14 16 18 20
(Unit:mm)
Thyristors
3-2
3 Thyristors
Ordering Information
All products listed must be ordered in standard packing increments.
Product Name
Package
TFC563D
TO220S(Straight)
600(Stick)
TF541S-A
TO220F
1000(Box)/3750(Stick)
TF561S-A
TO220F
1000(Box)/3750(Stick)
TFA37S
TO220F
1000(Box)/3750(Stick)
TFA38S
TO220F
1000(Box)/3750(Stick)
TFA57S
TO220F
1000(Box)/3750(Stick)
TFA58S
TO220F
1000(Box)/3750(Stick)
TFA87S
TO220F
1000(Box)/3750(Stick)
TFA88S
TO220F
1000(Box)/3750(Stick)
TFA107S
TO220F
1000(Box)/3750(Stick)
TFA108S
TO220F
1000(Box)/3750(Stick)
TMA104S-L
TO220F
1000(Box)/3750(Stick)
TMA106G-L
TO220
4000(Stick)
TMA106H-L
TO220F-A
4000(Stick)
TMA106S-L
TO220F
1000(Box)/3750(Stick)
TMA124S-L
TO220F
1000(Box)/3750(Stick)
TMA126G-L
TO220
4000(Stick)
TMA126H-L
TO220F-A
4000(Stick)
TMA126S-L
TO220F
1000(Box)/3750(Stick)
TMA164B-L
TO3PF
500(Box)/1080(Stick)
TMA164P-L
TO3P
500(Box)/1080(Stick)
TMA164S-L
TO220F
1000(Box)/3750(Stick)
TMA166B-L
TO3PF
500(Box)/1080(Stick)
TMA166G-L
TO220
4000(Stick)
TMA166H-L
TO220F-A
4000(Stick)
TMA166P-L
TO3P
500(Box)/1080(Stick)
TMA166S-L
TO220F
1000(Box)/3750(Stick)
TMA204S-L
TO220F
1000(Box)/3750(Stick)
TMA206S-L
TO220F
1000(Box)/3750(Stick)
TMA254B-L
TO3PF
500(Box)/1080(Stick)
TMA256B-L
TO3PF
500(Box)/1080(Stick)
TMA34S-L
TO220F
1000(Box)/3750(Stick)
TMA36G-L
TO220
4000(Stick)
TMA36H-L
TO220F-A
4000(Stick)
TMA36S-L
TO220F
1000(Box)/3750(Stick)
TMA54S-L
TO220F
1000(Box)/3750(Stick)
TMA56G-L
TO220
4000(Stick)
TMA56H-L
TO220F-A
4000(Stick)
TMA56S-L
TO220F
1000(Box)/3750(Stick)
TMA84S-L
TO220F
1000(Box)/3750(Stick)
TMA86G-L
TO220
4000(Stick)
TMA86H-L
TO220F-A
4000(Stick)
TMA86S-L
TO220F
1000(Box)/3750(Stick)
TMB166S-L
TO220F
1000(Box)/3750(Stick)
TMB206S-L
TO220F
1000(Box)/3750(Stick)
192
Thyristors
3 Thyristors
Application Note
Since reliability can be affected adversely by improper storage environment or handling methods during Characteristic tests, please observe the
following cautions.
Heatsink
A larger contact area between the device and the heatsink is required for
more effective heat radiation. To ensure a larger contact area, minimize
mounting holes. And select a heatsink with a surface smooth enough and
free from burrs and slivers.
Soldering Temperature
In general, the device mounted on a printed circuit board is subjected to
high temperatures from flow solder in a solder bath, or, from a soldering
iron at hand soldering.
The testing method and test conditions for a devices heat resistance to
soldering are:
At a distance of 1.5mm from the device's main body, apply 260C for 10
seconds, and 350C for 3 seconds.
Please observe these limits and finish soldering in as short a time as
possible.
Since reliability can be affected adversely by improper storage environment or handling methods during Characteristic tests, please observe the
following cautions.
Silicone Grease
When using a heatsink, please coat thinly and evenly the back surface of
the device and both surfaces of the insulating plate with silicone grease to
lower the thermal resistance between the device and the heatsink.
Please select proper silicone grease carefully since the oil in some grease
products may penetrate the device and result in an extremely short device
life.
Recommended Silicone Grease
G-746 (Shin-Etsu Chemical)
YG6260 (Momentive Performance Materials Inc.)
SC102 (Dow Corning Toray Silicone)
Mounting Torque
When mounting torque is insufficient, thermal resistance increases, and so
heat radiation effect is decreased. When the torque is excessive, the
screw may be broken, the heatsink may be deformed, and the device
frame may be distorted, resulting in the device damage. Recommended
mounting torque per package is as follows:
Mounting Torque Table
Package
TO220
TO220F-A, TO220F (FM20)
TO3P (MT100)
TO3PF (FM100)
Screw Torque
0.490 to 0.686 Nm (5 to 7kgfcm)
0.686 to 0.882 Nm (7 to 9kgfcm)
Thyristors
193
3-1 Thyristors
Thyristors
Absolute Maximum Ratings
Part Number
V RSM
V DSM
V RRM
V DRM
IT (AV)
(V)
(V)
(A)
I T (RMS)
(50Hz)
Conditions
Tc
(C)
(A)
ITSM
50Hz Single
Half Sine
Wave, Default
T j =125C (A)
P GM
P G (AV)
V RGM
IFGM
Tj
T stg
(W)
(W)
(V)
(A)
(C)
(C)
I RRM
I DRM Conditions
Tj
(mA)
(C)
max
TF541S-A
500
400
5.0
88
7.8
80
5.0
0.5
5.0
2.0
40 to +125
2.0
125
TF561S-A
700
600
5.0
88
7.8
80
5.0
0.5
5.0
2.0
40 to +125
2.0
125
TFA37S
700
3.0
127
4.7
60
5.0
0.5
5.0
2.0
40 to +150
2.0
150
TFA57S
700
5.0
115
7.8
80
5.0
0.5
5.0
2.0
40 to +150
2.0
150
TFA87S
700
8.0
98
12.6
120
5.0
0.5
5.0
2.0
40 to +150
2.0
150
TFA107S
700
10
86
15.7
160
5.0
0.5
5.0
2.0
40 to +150
2.0
150
TFA38S
800
3.0
50
4.7
60
5.0
0.5
5.0
2.0
40 to +150
2.0
150
TFA58S
800
5.0
50
7.8
80
5.0
0.5
5.0
2.0
40 to +150
2.0
150
TFA88S
800
8.0
50
12.6
120
5.0
0.5
5.0
2.0
40 to +150
2.0
150
TFA108S
800
10
50
15.7
160
5.0
0.5
5.0
2.0
40 to +150
2.0
150
I TRM*1
di/dt*1
P GM
PG (AV)
V RGM
I FGM*2
I FRM
Tj
Tstg
I DRM
Part Number
(V)
TFC563D
600
(A)
500
(A/s)
1500
(W)
5.0
(W)
(V)
0.5
194
Thyristors
5.0
(A)
2.0
(A)
450
(C)
(C)
40 to +125
(mA)
max
1.0
VTM
Conditions
Tj
(C)
125
(V)
max
1.4
Conditions
Tc
I TM
(C)
(A)
25
10
3-1 Thyristors
Electrical Characteristics
V TM
IGT
V GT
(V)
max
Conditions
I TM
Tc
(C)
(A)
(V)
typ
max
typ
VGD
(mA)
max
Conditions
Tc
(C)
(V)
min
Tj
(C)
dv/d t
Conditions
Conditions
VD
Tj
(V)
(V/ s) (C)
typ
IH
Mass
Rth
Package
VD
(V)
(mA)
typ
(C/W)
max
2.0
1.4
25
10
1.5
0.03
0.2
25
0.1
125
1/2V DRM
20
125
1/2V DRM
4.0
4.0
TO220F
1.4
25
10
1.5
0.03
0.2
25
0.1
125
1/2V DRM
20
125
1/2V DRM
4.0
4.0
TO220F
2.0
1.5
25
10
1.0
7.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
15
4.1
TO220F
2.0
1.5
25
15
1.0
7.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
15
3.8
TO220F
2.0
1.4
25
20
1.0
7.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
20
3.5
TO220F
2.0
1.35
25
20
1.0
7.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
20
3.4
TO220F
2.0
1.5
25
10
1.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
15
4.1
TO220F
2.0
1.5
25
15
1.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
15
3.8
TO220F
2.0
1.5
25
20
1.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
20
3.5
TO220F
2.0
1.35
25
20
1.0
15
25
0.2
125
1/2VDRM
300
125
1/2VDRM
20
3.4
TO220F
2.0
IH
Rth
Thyristors
195
Electrical Characteristics
V GT
I GT
(V)
typ
max
1.5
typ
VGD
(mA)
max
30
Conditions
Tc
(C)
25
(V)
min
0.1
Tj
(C)
125
VD
(V)
480
(mA)
typ
12
(C/W)
max
4.0
Mass
VF
Conditions
(V)
max
1.4
Conditions
IF
(A)
10
Package
(g)
TO-220S
1.5
3-2 Triacs
Triacs
V DRM
IT (RMS)
Part Number
(V)
(A)
I GM
Tj
T stg
I DRM1
IDRM2
V TM
Conditions
(A)
(C)
(C)
(mA)
max
Conditions
(mA)
max
(V)
max
Conditions
I TM
(A)
TMA34S-L
400
109
30
125
0.3
0.5
40 to +125
0.1
1.5
TMA54S-L
400
102
50
125
0.5
40 to +125
0.1
1.5
4.5
7
TMA84S-L
400
92
80
125
0.5
40 to +125
0.1
1.5
12
TMA104S-L
400
10
85
100
125
0.5
40 to +125
0.1
1.5
14
TMA124S-L
400
12
77
120
125
0.5
40 to +125
0.1
1.5
17
TMA164S-L
400
16
66
160
125
0.5
40 to +125
0.1
1.45
20
TMA164P-L
400
16
108
160
125
0.5
40 to +125
0.1
1.4
20
TMA164B-L
400
16
98
160
125
0.5
40 to +125
0.1
1.4
20
53
190
125
0.5
40 to +125
0.1
1.4
20
TMA204S-L
400
20
TMA254B-L
400
25
83
250
125
0.5
40 to +125
0.1
1.3
20
TMA36S-L
600
109
30
125
0.3
0.5
40 to +125
0.1
1.5
4.5
TMA36G-L
600
115
30
25
0.5
0.5
40 to +125
0.1
1.5
4.5
TMA36H-L
600
109
30
25
0.5
0.5
40 to +125
0.1
1.5
4.5
TMA56S-L
600
102
50
125
0.5
40 to +125
0.1
1.5
TMA56G-L
600
111
50
25
0.5
40 to +125
0.1
1.5
TMA56H-L
600
101
50
25
0.5
40 to +125
0.1
1.5
TMA86S-L
600
92
80
125
0.5
40 to +125
0.1
1.5
12
TMA86G-L
600
107
80
25
0.5
40 to +125
0.1
1.5
12
TMA86H-L
600
91
80
25
0.5
40 to +125
0.1
1.5
12
TMA106S-L
600
10
85
100
125
0.5
40 to +125
0.1
1.5
14
TMA106G-L
600
10
105
100
25
0.5
40 to +125
0.1
1.5
14
TMA106H-L
600
10
83
100
25
0.5
40 to +125
0.1
1.5
14
25C
125C
TMA126S-L
600
12
77
120
125
0.5
40 to +125
0.1
1.5
17
TMA126G-L
600
12
103
120
25
0.5
40 to +125
0.1
1.5
17
TMA126H-L
600
12
78
120
25
0.5
40 to +125
0.1
1.5
17
TMA166S-L
600
16
66
160
125
0.5
40 to +125
0.1
1.45
20
20
TMA166G-L
600
16
100
160
25
0.5
40 to +125
0.1
1.45
TMA166H-L
600
16
65
160
25
0.5
40 to +125
0.1
1.45
20
TMA166P-L
600
16
108
160
125
0.5
40 to +125
0.1
1.4
20
TMA166B-L
600
16
98
160
125
0.5
40 to +125
0.1
1.4
20
TMB166S-L
600
16
94
160
125
0.5
40 to +150
0.1
1.45
20
TMA206S-L
600
20
53
190
125
0.5
40 to +125
0.1
1.4
20
TMB206S-L
600
20
85
200
125
0.5
40 to +150
0.1
1.4
20
TMA256B-L
600
25
83
250
125
0.5
40 to +125
0.1
1.3
20
196
Thyristors
3-2 Triacs
(dv/dt) c
R th (j-c)
Conditions
Package
(dv/dt) c T j
(V/us) (A/ms) (C) (C/W)
max
min
Mass
(g)
1.5
1.5
1.5
12
20
20
20
20
12
20
1.5 125
4.5
TO220F
2.0
1.5
1.5
1.5
12
20
20
20
20
12
20
2.5 125
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
4 125
3.7
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
5 125
3.6
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
6 125
3.5
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
8 125
3.3
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
8 125
1.2
TO3P
6.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
8 125
1.8
TO3PF
6.5
1.5
1.5
1.5
12
20
30
30
30
12
20
10
10 125
3.2
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
12 125
1.6
TO3PF
6.5
1.5
1.5
1.5
12
20
15/20
15/20
15/20
12
20
1.5 125
4.5
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
1.5 125
1.5
1.5
1.5
12
20
30
30
30
12
20
1.5 125
4.6
1.5
1.5
1.5
12
20
15/20
15/20
15/20
12
20
2.5 125
1.5
1.5
1.5
12
20
30
30
30
12
20
2.5 125
1.5
1.5
1.5
12
20
30
30
30
12
20
2.5 125
1.5
1.5
1.5
12
20
20/30
20/30
20/30
12
20
10
1.5
1.5
1.5
12
20
30
30
30
12
20
10
TO220
2.5
TO220F-A
2.0
TO220F
2.0
2.5
TO220
2.5
4.2
TO220F-A
2.0
4 125
3.7
TO220F
2.0
4 125
TO220
2.5
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
4 125
3.8
TO220F-A
1.5
1.5
1.5
12
20
20/30
20/30
20/30
12
20
10
5 125
3.6
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
5 125
1.8
TO220
2.5
1.5
1.5
1.5
12
20
30
30
30
12
20
10
5 125
3.7
TO220F-A
2.0
1.5
1.5
1.5
12
20
20/30
20/30
20/30
12
20
10
6 125
3.5
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
6 125
1.6
TO220
2.5
1.5
1.5
1.5
12
20
30
30
30
12
20
10
6 125
3.5
TO220F-A
2.0
1.5
1.5
1.5
12
20
20/30
20/30
20/30
12
20
10
8 125
3.3
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
8 125
1.4
TO220
2.5
1.5
1.5
1.5
12
20
30
30
30
12
20
10
8 125
3.3
TO220F-A
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
8 125
1.2
TO3P
6.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
8 125
1.8
TO3PF
6.5
1.5
1.5
1.5
12
20
30
30
30
12
20
10
10 125
3.0
TO220F
2.0
1.5
1.5
1.5
12
20
20/30
20/30
20/30
12
20
10
10 125
3.2
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
10 125
2.7
TO220F
2.0
1.5
1.5
1.5
12
20
30
30
30
12
20
10
12 125
1.6
TO3PF
6.5
Thyristors
197
TO-220F-A
2.760.2
4.0 0.2
3.20.2
a
b
0.15
0.2
2.54
2.540.2
0.2
10
0.2
13.0min
0.8
3.9
0.5 0.1
0.1
9.750.5
13.10.5
0.5 0.1
4.20.2
C
2.80.2 0.5
8.4 0.2
15.90.3
15.80.2
2.40.2
(3)
9.20.3
18.95MAX
3.20.2
3.60.2
10.00.2
2.540.2
0.8 0.2
10.160.3
16.9 0.3
4.50.2
1.30.2
6.680.2
9.90.3
(8.7)
TO-220F
15.870.3
2.80.2
(1.3)
(1.7)
TO-220
1.350.15
1.350.15
0.85+0.2
0.1
0.45+0.2
0.1
2.54
2.54
4.70.2
2.40.2
0.2
2.2
a: Part Number
b: Lot No.
(1)(2)(3)
Pin No.
(1)
(2)
(3)
5.45 0.1
1.7 +0.2
0.1
a: Part Number
b: Lot No.
(1.4)
5.450.1
(Measured
at the root)
15.60.2
1.5 4.4 1.5
+0.2
1.30.2
0.86 -0.1
0.65 0.1
(Measured
at the root)
10.5
9.10.3
(0.45)
+0.2
1.34 -0.1
+0.2
+0.2
1.05 0.1
5.450.1
4.440.2
2.60.2
(Measured
at the root)
110.5
5.45 0.1
1.75 0.1
+0.2
2.15 0.1
0.65+0.2
0.1
(5)
(2.69) (1.8)
+0.2
3 +0.2
0.1
(16.2)
2 +0.2
0.1
1.05+0.2
0.1
3.350.2
(Measured
at the root)
1.6
3.3
a
b
230.3
5.50.2
9.50.2
2.0 0.1
3.2 0.1
1.8
2.0
a
b
20.0min
3.5
19.90.3
4.0
3.20.2
4.8 0.2
TO-220S Straight
5.50.2
3.450.2
+0.3
-0.5
TO-3PF
15.6 0.3
13.6 0.2
9.6 0.2
5.0 0.7
TO-3P
Cathode (T1)
Anode (T2)
Gate (G)
( ): Triacs
0.760.1
a: Part Number
b: Lot No.
2.540.1
2.540.1
(Measured
at the root)
(Measured
at the root)
0.40.1
10.20.3
(Unit: mm)
198
Thyristors
Diodes
4-2
4-3
4-4
4-5
4-6
4 Diodes
Ordering Information
All products listed must be ordered in standard packing increments.
Series Name/Product Name
Package
Bulk
Taping
AG01x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
AK0x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
AL01x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
AM01x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
AP01x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
AS01x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
AU01x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
AU02x
V:5000(Reel)
V1:3000(Box)
V0:3000(Box)
WS:2500(Box)
WK:2500(Box)
EG01x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EK0x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EL02x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EM01x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EN01x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EP01x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
ES01x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EU01x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EU02x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
SVxx
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
VR-xx
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
W:4000(Box)
EG1x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
EH1x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
EK1x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
EL1x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
EM1x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
EM2x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
ES1x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
EU1x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
EU2x
V:5000(Reel)
V1:2000(Box)
V0:2000(Box)
RA1x
V:3000(Reel)
V1:1000(Box)
RC2
V:3000(Reel)
V1:1000(Box)
RF1x
V:3000(Reel)
V1:1000(Box)
RG10x
V:3000(Reel)
V1:1000(Box)
RG1x
V:3000(Reel)
V1:1000(Box)
RH1x
V:3000(Reel)
V1:1000(Box)
RK1x
V:3000(Reel)
V1:1000(Box)
RL10x
V:3000(Reel)
V1:1000(Box)
RM10x
V:3000(Reel)
V1:1000(Box)
RM11x
V:3000(Reel)
V1:1000(Box)
RM1x
V:3000(Reel)
V1:1000(Box)
RN1x
V:3000(Reel)
V1:1000(Box)
RP1x
V:3000(Reel)
V1:1000(Box)
RS1x
V:3000(Reel)
V1:1000(Box)
RU1x
V:3000(Reel)
V1:1000(Box)
RU20x
V:3000(Reel)
V1:1000(Box)
RU2x
V:3000(Reel)
V1:1000(Box)
RX10x
V:3000(Reel)
V1:1000(Box)
RD2x
V:3000(Reel)
V1:1000(Box)
RG2x
V:3000(Reel)
V1:1000(Box)
RH2x
V:3000(Reel)
V1:1000(Box)
RK3x
V:3000(Reel)
V1:1000(Box)
RL2x
V:3000(Reel)
V1:1000(Box)
RM2x
V:3000(Reel)
V1:1000(Box)
RN2x
V:3000(Reel)
V1:1000(Box)
RO2x
V:3000(Reel)
V1:1000(Box)
RU3x
V:3000(Reel)
V1:1000(Box)
RG4x
500
RH4x
500
RJ4x
500
RK4x
500
RL4x
500
RM4x
500
RN4x
500
RS4x
500
RU4x
500
RW5x
500
200
Diodes
4 Diodes
Package
Bulk
Taping
SJPA-xx
SJP
V:1800(Reel)
SJPB-xx
SJP
V:1800(Reel)
SJPE-xx
SJP
V:1800(Reel)
SJPJ-xx
SJP
V:1800(Reel)
SJPL-xx
SJP
V:1800(Reel)
SJPM-xx
SJP
V:1800(Reel)
SJPW-xx
SJP
V:1800(Reel)
SJPX-xx
SJP
V:1800(Reel)
SJPZ-xx
SJP
V:1800(Reel)
SZ-10xx
SZ-10(Surface-mount)
VL:750(Reel)
FMC-2xU
TO220F(2-element)
500
FM2-2202
TO220F(Center-tap)
500
FMB-2x
TO220F(Center-tap)
500
FMEN-2x
TO220F(Center-tap)
500
FMG-1x
TO220F(Center-tap)
500
FMG-2x
TO220F(Center-tap)
500
FMJ-2x
TO220F(Center-tap)
500
FML-1x
TO220F(Center-tap)
500
FML-2x
TO220F(Center-tap)
500
FMM-2x
TO220F(Center-tap)
500
FMU-1x
TO220F(Center-tap)
500
FMU-2x
TO220F(Center-tap)
500
FMW-2x
TO220F(Center-tap)
500
FMX-1x
TO220F(Center-tap)
500
FMX-2x
TO220F(Center-tap)
500
FMXA-2x
TO220F(Center-tap)
500
FMB-G1x
TO220F-2Pin
500
FMB-G2x
TO220F-2Pin
500
FMC-G2x
TO220F-2Pin
500
FMD-G2x
TO220F-2Pin
500
FMG-G2x
TO220F-2Pin
500
FML-G1x
TO220F-2Pin
500
FML-G2x
TO220F-2Pin
500
FMN-G1x
TO220F-2Pin
500
FMN-1x
TO220F-2Pin
500
FMU-G1x
TO220F-2Pin
500
FMU-G2x
TO220F-2Pin
500
FMXA-1x
TO220F-2Pin
500
FMX-G1x
TO220F-2Pin
500
VR:750(Reel)
FMX-G2x
TO220F-2Pin
500
FMC-2xUA
TO220F-2Pin(2-element)
500
MPE-2x
TO220S(Surface-mount)
VR:1000(Reel)
MPL-102S
TO220S(Surface-mount)
VR:1000(Reel)
MPEN-2x
TO263(Surface-mount)
VL:800(Reel)
VR:800(Reel)
MPL-1036S
TO220S(Surface-mount)
VL:800(Reel)
VR:800(Reel)
FMD-4x
TO3PF(Center-tap)
500
FMXA-4x
TO3PF(Center-tap)
500
FML-4x
TO3PF(Center-tap)
500
FMW-4x
TO3PF(Center-tap)
500
FMN-3x
TO3PF-2Pin
500
Diodes
201
4 Diodes
Taping Specifications
Taping Type, Dimensions (mm)
Axial taping
6.0
+ 0.5
0
52.0
(White)
+1
6.0
83 2
5.08 + 0.38
(Blue)
5,000 pcs/reel
Core Flange
+ 0.5
0
25 0.1
0.5max
Axial taping
75 2
+ 0.5
0.5
max
+ 0.5
0
77max
5.08 + 0.38
Broken lines:
perforation
(White)
52.0
+1
6.0
255max
Axial taping
a
77m
(Blue)
6.0
+ 0.5
0
0.5
max
95max
5.08 + 0.38
Broken lines:
perforation
(White)
26.0
+1
0
6.0
ax
+ 0.5
0
0.5max
Diodes
3,000 pcs/box
(2.4 body)
1.0 ---1.0
0.5max
V0
202
2,000 pcs/box
(2.7 body)
1,000 pcs/box
(4 body)
+ 0.5
0.5max
To specify the
taping type, add
a suffix [V0]
(4 body)
(Blue)
6.0
3,000 pcs/reel
812
Holddown clip
1.0 ---1.0
0.5max
V1
To specify the
taping type, add
a suffix [V1]
2.7 body
2.4 body
29 1
75 1
15
0.5
max
To specify the
taping type, add
a suffix [V]
Quantity
Reel
+ 0.5
1.0 ---1.0
0.5max
340 2
Taping Name
255max
51m
2,000 pcs/box
(2.7 body)
3,000 pcs/box
(2.4 body)
4 Diodes
0.7 0.2
4.0 0.2
140max
Part No., Lot No.,
Quantity
150max
+0.8
5.0 0.2
12.7 0.3
0 2.0
+1.0
18.0 0.5
+0.5
ANODE
0 +--- 1
12.5min
9 +--- 0.5
18 +--- 10.5
5+--- 0.8
0.2
45m
1.5
22.2 +--- 1
2.75+--- 0.5
0 +--- 1
2,500 pcs/box
(2.4 body)
ax
1max
(30)
(5.5)
11max
+ 1.0
340max
3.850.7
2.7 body
0.6 lead only
340max
3.85+--- 0.7
12.7+--- 0.3
12.7+--- 1
To specify the
taping type, add
a suffix [WK]
4,000 pcs/box
Radial taping
(for A0 series)
WK
+1.0
4.0 0.2
18.0 0
11max
To specify the
taping type, add
a suffix [WS]
0.70.2
5.0 0.5
12.7 0.3
ANODE
18.0 0.5
1.0
1.0
1.0 max
3.85 0.7
Radial taping
(for A0 series)
Broken lines:
perforation
9.00.5
12.5min
4.2
max
12.7
12.7
0 2.0
3.0 max
27.5 0.5
16.0 0.5 (11.5)
To specify the
taping type, add
a suffix [W]
WS
E
CATHOD
Quantity
55m
ax
Radial taping
ODE
CATH
Taping Name
Diodes
203
4 Diodes
To specify the
taping type, add
a suffix [VL] or
[VR]
5.0 +0.4
0.1
1.750.1
1.5 +0.1
0
Feeding Direction
40.1
20.05
2.00.5
130.5
5.60.1
5.50.05
0.05 +0.1
0.05
1.30.4
12 +0.3
0.1
4.50.2
2.60.2
VL
VR
Quantity
Reel
2.150.2
SJP
Emboss Taping
R1.0
210.8
VL VR
1.30.4
1.50.2
40.1
602
Taping Name
1800 pcs/reel
2.40.1
2.90.1
(1) Device is placed in the embossed pocket with the mounting electrode down.
(2) 150 to 200mm leader tape is attached to the tip of the tape.
(3) 10 or more blank pockets are provided at both the beginning and
the end of the tape.
180 +0
3
131.5
1.20.5
13
0)
1.750.1
10.8 0.1
(1
(R5)
(R5)
20
)
(6.0)
4.9 max
0.40.1
3.0 max
31 max
1000 pcs/reel
0.5 0.5
20.5 25.5
2
11.50.1
12.0 0.1
13.90.1
To specify the
taping type, add
a suffix [VR]
4.0 0.1
24.0 0.3
2.00.1
1.5 +0.1
0
)
(40
R501
40.5
(2.0)
(R
VR
21.05 0.1
TO-220
Feeding Direction
130.5
100 1
330 2
Quantity
Feeding Direction
VL
4
5.640.1
10
16.000.1
1.500.25
750 pcs/reel
90.5
20.5
210.8
2
0.
13
5
0.
130.5
204
Diodes
130.2
0.400.05
10.800.1
7 0.5
L TYPE
1001
25.51
29.51
4
R TYPE
3302
22
40
60
120
R135
Feeding Direction
20
80
16.000.1
+0.3
11.500.1
2.000.1
24.000.1
4.000.1
1.750.1
750 pcs/reel
1.500.1
To specify the
taping type,
add a suffix
[VR]
1 3 B
10
VR
1 3 B
35
To specify the
taping type,
add a suffix
[VL]
4 Diodes
Application Note
Surface-Mount Diodes
Hold
Axial type
Bend
Hold
Frame type
Bend
(2) Mounting
To mount a frame-type diode on a heatsink, use its screw hole. Do not
fix its resin body as the silicon chip may get broken.
(3) Temperature Measurement
For an axial type diode, measure the temperature of the lead wire on
the main body side. The thermocouple to be used must be as thin as
possible (approximately 0.125mm).
300
280
260
240
220
200
180
160
0
10
20
30
40
50
60
70
80
Time (sec)
iii) For using a soldering iron, use the following references:
Temperature of soldering iron tip:
Lower than 300C
(Power of the soldering
iron: 30W or lower)
The soldering tip must
be as thin as possible.
Soldering time: Less than 10 seconds
2.0
2.0
2.0
Usable Range
General Description
4.0 to 4.2
Diodes
205
4 Diodes
Marking Guide
5 TO-3PF, FM100 type
1 Axial (A0)
M A
9
D
Cathode band
Color: White
RK44
96
4 TO-220F type
FMU12S
8512
5905
qPart Number
FMU-12S is indicated as FMU12S.
wPolarity: Rectifier Symbol
eLot No.
First letter: Year (Last digit of year)
Second letter: Month (1 to 9, O, N, D)
Third and fourth letters: Day
Laser marking or White ink marking
(1-chip type)
FMQ-G5GS
MO
C
87
FMXA4203
6905
6 Surface-Mount (SJP)
qPart Number
7 Surface-Mount (TO-220S)
E 29G
9C1
8 SZ-10 Series
qPart Number
wPolarity: Rectifier Symbol
eLot No.
First letter: Year (Last digit of year)
Second letter: Month (A to M except I)
Third letter: Week
qPart Number
wLot No.
First letter: Year (Last digit of year)
Second letter: Month (1 to 9, O, N, and D)
Third letter: Day
9 Silicon Varistors
Refer to P217
(1-chip type)
FMLG12
S
0125
206
Diodes
IF (AV)
(A)
Values in parentheses
are for the products
with heatsinks
2.0
Package
Surface-Mount (SJP)
Part Number
SJPM-H4
IFSM
(A)
50Hz
Single Half Sine Wave
45
Tj
(C)
Tstg
(C)
40 to +150
VF
(V)
max
1.1
IF
(A)
2.0
IR
(A)
VR=VRM
max
IR(H)
(A)
VR=VRM
max
Tj
(C)
10
50
150
IR
(A)
VR=VRM
max
IR(H)
(A)
VR=VRM
max
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
20
Mass
(g)
0.072
Thru-Hole
VRM
(V)
100
200
400
600
800
1000
IF (AV)
(A)
Package
Axial
Values in parentheses
are for the products (Body Diameter/Lead Diameter)
with heatsinks
Part Number
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
1.0
Axial(2.7/0.78)
EM 1Y
45
40 to +150
0.97
1.0
10
500
150
17
3.0
Axial(6.5/1.4)
RM 4Y
200
40 to +150
0.95
3.0
10
50
150
8.0
1.2
1.0
Axial(2.4/0.6)
AM01Z
35
40 to +150
0.98
1.0
10
50 100(Ta)
22
0.13
1.0
Axial(2.7/0.6)
EM01Z
45
40 to +150
0.97
1.0
10
50
100
20
0.2
1.0
Axial(2.7/0.78)
EM 1Z
45
40 to +150
0.97
1.0
10
500
150
17
0.3
1.0
Axial(4.0/0.78)
RM 1Z
50
40 to +150
0.95
1.0
5.0
50
100
15
0.4
1.2
Axial(4.0/0.98)
RO 2Z
80
40 to +150
0.92
1.5
10
50 100(Ta)
12
0.61
1.2
Axial(4.0/0.98)
RM 2Z
100
40 to +150
0.91
1.5
10
50
12
0.6
1.5
Axial(4.0/0.78)
RM 10Z
120
40 to +150
0.91
1.5
10
50 100(Ta)
15
0.4
3.0
Axial(6.5/1.4)
RM 4Z
200
40 to +150
0.95
3.0
10
50 100(Ta)
8.0
1.2
10
TO-220F(Center-tap)
FMM-22S, R
100
40 to +150
1.1
5.0
10
1.0
Axial(2.4/0.6)
AM01
35
40 to +150
0.98
1.0
10
1.0
Axial(2.7/0.6)
EM01
45
40 to +150
0.97
1.0
10
1.0
Axial(2.7/0.78)
EM 1
45
40 to +150
0.97
1.0
10
1.0
Axial(4.0/0.78)
RM 1
50
40 to +150
0.95
1.0
5.0
1.2
Axial(2.7/0.78)
EM 2
80
40 to +150
0.92
1.2
10
1.2
Axial(4.0/0.98)
RO 2
80
40 to +150
0.92
1.5
10
1.2
Axial(4.0/0.98)
RM 2
100
40 to +150
0.91
1.5
1.2
Axial(4.0/0.78)
RM 10
150
40 to +150
0.91
1.5
3.0
Axial(6.5/1.4)
RM 4
200
40 to +150
0.95
10
TO-220F(Center-tap)
FMM-24S, R
100
40 to +150
1.0
Axial(2.4/0.6)
AM01A
35
1.0
Axial(2.7/0.6)
EM01A
1.0
Axial(2.7/0.78)
EM 1A
1.0
Axial(4.0/0.78)
1.2
100
100
4.0
2.1
50 100(Ta)
22
0.13
50 100(Ta)
20
0.2
17
0.3
15
0.4
500
150
0.3
150
50 100(Ta)
500
150
17
0.3
50 100(Ta)
12
0.61
10
50
100
12
0.6
10
50
100
15
0.4
3.0
10
50
150
8.0
1.2
1.1
5.0
10
100
150
4.0
2.1
40 to +150
0.98
1.0
10
50 100(Ta)
22
0.13
45
40 to +150
0.97
1.0
10
50 100(Ta)
20
0.2
45
40 to +150
0.97
1.0
10
500
150
17
0.3
RM 1A
50
40 to +150
0.95
1.0
5.0
50
100
15
0.4
Axial(2.7/0.78)
EM 2A
80
40 to +150
0.92
1.2
10
50
100
17
0.3
1.2
Axial(4.0/0.78)
RM 11A
100
40 to +150
0.92
1.5
10
50
100
15
0.4
1.2
Axial(4.0/0.98)
RM 2A
100
40 to +150
0.91
1.5
10
50
100
12
0.6
1.2
Axial(4.0/0.78)
RM 10A
150
40 to +150
0.91
1.5
10
50
100
15
0.4
3.0
Axial(6.5/1.4)
RM 4A
200
40 to +150
0.95
3.0
10
50
150
8.0
1.2
3.2
Axial(6.5/1.4)
RM 4AM
350
40 to +150
0.92
3.5
10
50
100
8.0
1.2
FMM-26S, R
100
150
4.0
2.1
15
0.4
10
TO-220F(Center-tap)
100
40 to +150
1.1
5.0
10
0.8
Axial(4.0/0.78)
RM 1B
40
40 to +150
1.2
1.0
5.0
1.0
Axial(2.7/0.78)
EM 1B
35
40 to +150
1.05
1.0
20
200
150
17
0.3
1.2
Axial(2.7/0.78)
EM 2B
80
40 to +150
0.92
1.2
10
500
150
17
0.3
1.2
Axial(4.0/0.78)
RM 11B
100
40 to +150
0.92
1.5
10
50 100(Ta)
15
0.4
1.2
Axial(4.0/0.98)
RM 2B
100
40 to +150
0.91
1.5
10
50
12
0.6
1.2
Axial(4.0/0.78)
RM 10B
150
40 to +150
0.91
1.5
10
50 100(Ta)
15
0.4
0.8
Axial(4.0/0.78)
RM 1C
40
40 to +150
1.2
1.0
5.0
100 100(Ta)
15
0.4
1.0
Axial(2.7/0.78)
EM 1C
35
40 to +150
1.05
1.0
20
200
17
0.3
1.2
Axial(4.0/0.98)
RO 2C
80
40 to +150
0.92
1.5
10
50 100(Ta)
12
0.61
1.2
Axial(4.0/0.78)
RM 11C
100
40 to +150
0.92
1.5
10
50
100
15
0.4
1.2
Axial(4.0/0.98)
RM 2C
100
40 to +150
0.91
1.5
10
50
100
12
0.6
3.0
Axial(6.5/1.4)
RM 4C
150
40 to +150
0.97
3.0
10
50
100
8.0
1.2
Diodes
207
50 100(Ta)
100
150
200
400
IF (AV)
(A)
Values in parentheses
are for the products
with heatsinks (Body Diameter/Lead Diameter)
Part
Number
IFSM
(A)
Tj
(C)
50Hz
Single Half Sine Wave
Tstg
(C)
VF
(V)
max
IF
(A)
IR
IR(H)
(A)
(A)
VR=VRM VR=VRM
max
max
Tj
(C)
trrq
(s)
IF/IRP
(mA)
trrw
(s)
IF/IRP
(mA)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
0.2
0.5
Axial(2.7/0.6)
EU01Z
15
40 to +150
1.0
0.5
10
150 100(Ta)
0.4
10/10 0.18
10/20
20
0.5
Axial(2.7/0.78)
EU 1Z
15
40 to +150
1.0
0.5
10
150 100(Ta)
0.4
10/10 0.18
10/20
17
0.3
0.5
Axial(2.4/0.6)
AU01Z
15
40 to +150
1.7
0.5
10
150 100(Ta)
0.4
10/10 0.18
10/20
22
0.13
0.6
Axial(4.0/0.78)
RH 1Z
35
40 to +150
1.3
0.6
5.0
70 150(Ta)
4.0
10/10
1.3
10/20
15
0.4
0.7
Axial(2.7/0.78)
ES 1Z
30
40 to +150
2.5
0.8
10
200 100(Ta)
1.5
10/10
0.6
10/20
17
0.3
0.8
Axial(2.4/0.6)
AU02Z
25
40 to +150
1.3
0.8
10
250
100
0.4
10/10 0.18
10/20
22
0.13
1.0
Axial(2.7/0.6)
EU02Z
15
40 to +150
1.4
1.0
10
300
100
0.4
10/10 0.18
10/20
20
0.2
1.0
Axial(2.7/0.78)
EU 2Z
15
40 to +150
1.4
1.0
10
3000
150
0.4
10/10 0.18
10/20
17
0.3
1.0
Axial(4.0/0.78)
RU 2Z
20
40 to +150
1.5
1.0
10
300 100(Ta)
0.4
10/10 0.18
10/20
15
0.4
3.5
Axial(6.5/1.4)
RU 4Z
70
40 to +150
1.3
3.5
10
300
0.4
10/10 0.18
10/20
8.0
1.2
30
40 to +150
1.5
2.5
50
500 100(Ta)
4.0
2.1
10 TO-220F(Center-tap) FMU-22S, R
40
40 to +150
1.5
5.0
50
4.0
2.1
3000
100
150
0.25
Axial(2.7/0.6)
EU01
15
40 to +150
2.5
0.25
10
150 100(Ta)
0.4
10/10 0.18
10/20
20
0.2
0.25
Axial(2.7/0.78)
EU 1
15
40 to +150
2.5
0.25
10
150 100(Ta)
0.4
10/10 0.18
10/20
17
0.3
0.25
Axial(4.0/0.78)
RU 1
15
40 to +150
2.5
0.25
10
200 100(Ta)
0.4
10/10 0.18
10/20
15
0.4
0.5
Axial(2.4/0.6)
AU01
15
40 to +150
1.7
0.5
10
150 100(Ta)
0.4
10/10 0.18
10/20
22
0.13
0.6
Axial(2.4/0.6)
AS01
20
40 to +150
1.5
0.6
10
100
1.5
10/10
0.6
10/20
22
0.13
0.6
Axial(2.7/0.78)
EH 1
30
40 to +150
1.35
0.6
10
200 100(Ta)
4.0
10/10
1.3
10/20
17
0.3
0.7
Axial(2.7/0.78)
ES 1
30
40 to +150
2.5
0.8
10
200 100(Ta)
1.5
10/10
0.6
10/20
17
0.3
0.8
Axial(2.4/0.6)
AU02
25
40 to +150
1.3
0.8
10
250
100
0.4
10/10 0.18
10/20
22
0.13
1.0
Axial(2.7/0.6)
EU02
15
40 to +150
1.4
1.0
10
300
100
0.4
10/10 0.18
10/20
20
0.2
1.0
Axial(2.7/0.78)
EU 2
15
40 to +150
1.4
1.0
10
300
100
0.4
10/10 0.18
10/20
17
0.3
1.1
Axial(4.0/0.78)
RU 2M
20
40 to +150
1.2
1.1
10
300
100
0.4
10/10 0.18
10/20
15
0.4
1.5
Axial(4.0/0.98)
RU 3
20
40 to +150
1.5
1.5
10
400
100
0.4
10/10 0.18
10/20
12
0.6
1.5
Axial(4.0/0.98)
RU 3M
50
40 to +150
1.1
1.5
10
350
100
0.4
10/10 0.18
10/20
12
0.6
1.5(3.0)
Axial(6.5/1.4)
RU 4
50
40 to +150
1.5
3.0
10
300 100(Ta)
0.4
10/10 0.18
10/20
8.0
1.2
2.0(3.5)
Axial(6.5/1.4)
RU 4M
70
40 to +150
1.3
3.5
10
300
100
8.0
1.2
30
40 to +150
1.5
2.5
50
500 100(Ta)
4.0
2.1
10 TO-220F(Center-tap) FMU-24S, R
40
40 to +150
1.5
5.0
50
3000
150
4.0
2.1
0.25
600
Package
Axial
50
Axial(4.0/0.78)
RU 1A
15
40 to +150
2.5
0.25
10
150
100
0.4
10/10 0.18
10/20
15
0.4
0.5
Axial(2.4/0.6)
AU01A
15
40 to +150
1.7
0.5
10
150 100(Ta)
0.4
10/10 0.18
10/20
22
0.13
0.6
Axial(4.0/0.78)
RF 1A
15
40 to +150
2.0
0.6
10
200 100(Ta)
0.4
10/10 0.18
10/20
15
0.4
0.6
Axial(2.4/0.6)
AS01A
20
40 to +150
1.5
0.6
10
100
1.5
10/10
0.6
10/20
22
0.13
0.6
Axial(4.0/0.78)
RH 1A
35
40 to +150
1.3
0.6
5.0
70 150(Ta)
4.0
10/10
1.3
10/20
15
0.4
0.7
Axial(2.7/0.6)
ES01A
20
40 to +150
3.0
0.8
10
200 100(Ta)
1.5
10/10
0.6
10/20
20
0.2
0.7
Axial(4.0/0.78)
RS 1A
30
40 to +150
2.5
0.8
10
150
1.5
10/10
0.6
10/20
15
0.4
0.8
Axial(2.4/0.6)
AU02A
25
40 to +150
1.3
0.8
10
250 100(Ta)
0.4
10/10 0.18
10/20
22
0.13
1.0
Axial(2.7/0.6)
EU02A
15
40 to +150
1.4
1.0
10
300
100
0.4
10/10 0.18
10/20
20
0.2
1.0
Axial(2.7/0.78)
EU 2A
15
40 to +150
1.4
1.0
10
300 100(Ta)
0.4
10/10 0.18
10/20
17
0.3
1.0
Axial(4.0/0.78)
RU 2
20
40 to +150
1.5
1.0
10
300 100(Ta)
0.4
10/10 0.18
10/20
15
0.4
1.1
Axial(4.0/0.78)
RU 2AM
20
40 to +150
1.2
1.1
10
300
100
0.4
10/10 0.18
10/20
15
0.4
1.5
Axial(4.0/0.98)
RU 3A
20
40 to +150
1.5
1.5
10
400
100
0.4
10/10 0.18
10/20
12
0.6
1.5
Axial(4.0/0.78)
RU 20A
50
40 to +150
1.1
1.5
10
350
100
0.4
10/10 0.18
10/20
15
0.4
1.5
Axial(4.0/0.98)
RU 3AM
50
40 to +150
1.1
1.5
10
350
100
0.4
10/10 0.18
10/20
12
0.6
1.5(3.0)
Axial(6.5/1.4)
RU 4A
50
40 to +150
1.5
3.0
10
300 100(Ta)
0.4
10/10 0.18
10/20
1.2
3.0
Axial(4.0/0.98)
RY 2A
50
40 to +150
1.15
3.0
10
1000
150
0.2 100/100
0.1
100/200
12
0.6
3.0
TO-220F2Pin
FMY-1036S
50
40 to +150
1.15
3.0
10
1000
150
0.2 100/100
0.1
100/200
4.0
2.1
5.0
TO-220F2Pin
FMU-G16S
30
40 to +150
1.25
5.0
50
500 100(Ta)
100/200
4.0
2.1
5.0
TO-220F(Center-tap)
FMU-16S, R
30
40 to +150
1.5
2.5
50
500 100(Ta)
100/200
4.0
2.1
10
TO-220F(Center-tap)
FMU-26S, R
40
40 to +150
1.5
5.0
50
3000
150
100/200
4.0
2.1
10
TO-220F2Pin
FMU-G26S
40
40 to +150
1.35
10
50
500
150
100/200
4.0
2.1
10
TO-220F2Pin
FMY-1106S
180
40 to +150
1.15
10
30
3000
150
0.2 100/100
0.1
100/200
4.0
2.1
20
TO-220F(Center-tap)
FMY-2206S*
180
40 to +150
1.15
10
30
3000
150
0.2 100/100
0.1
100/200
4.0
2.1
50
2000
*Under development
208
Diodes
800
1000
1300
1500
2000
IF (AV)
(A)
Package
Axial
Values in parentheses
are for the products
with heatsinks (Body Diameter/Lead Diameter)
Part
Number
IFSM
(A)
Tj
(C)
50Hz
Single Half Sine Wave
Tstg
(C)
VF
(V)
max
IF
(A)
0.25
Axial(4.0/0.78)
RU 1B
15
40 to +150
2.5
0.25
0.6
Axial(4.0/0.78)
RF 1B
15
40 to +150
2.0
0.6
Axial(4.0/0.78)
RH 1B
35
40 to +150
1.3
0.7
Axial(4.0/0.78)
RS 1B
30
40 to +150
1.0
Axial(4.0/0.78)
RU 2B
20
1.1
Axial(4.0/0.98)
RU 3B
1.5(3.0)
Axial(6.5/1.4)
0.2
IR
IR(H)
(A)
(A)
VR=VRM VR=VRM
max
max
Tj
(C)
trrq
(s)
IF/IRP
(mA)
trrw
(s)
IF/IRP
(mA)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
10
200 100(Ta)
0.4
10/10 0.18
10/20
15
0.4
1.0
10
200
100
0.4
10/10 0.18
10/20
15
0.4
0.6
5.0
70 150(Ta)
4.0
10/10
1.3
10/20
15
0.4
2.5
0.8
10
2000
150
1.5
10/10
0.6
10/20
15
0.4
40 to +150
1.5
1.0
10
300
100
0.4
10/10 0.18
10/20
15
0.4
20
40 to +150
1.5
1.0
10
400
100
0.4
10/10 0.18
10/20
12
0.6
RU 4B
50
40 to +150
1.6
3.0
10
500 100(Ta)
0.4
10/10 0.18
10/20
8.0
1.2
Axial(4.0/0.78)
RU 1C
15
40 to +150
3.0
0.25
10
250
100
0.4
10/10 0.18
10/20
15
0.4
0.6
Axial(4.0/0.78)
RH 1C
35
40 to +150
1.3
0.6
5.0
70 150(Ta)
4.0
10/10
1.3
10/20
15
0.4
0.8
Axial(4.0/0.78)
RU 2C
20
40 to +150
1.5
1.0
10
300 100(Ta)
0.4
10/10 0.18
10/20
15
0.4
1.5
Axial(4.0/0.98)
RU 3C
20
40 to +150
2.5
1.5
10
400
100
0.4
10/10 0.18
10/20
12
0.6
1.5(2.5)
Axial(6.5/1.4)
RU 4C
50
40 to +150
1.6
3.0
50
500
100
100/200
8.0
1.2
1.5
Axial(6.5/1.4)
RU 4D
50
40 to +150
1.8
1.5
50
500
100
8.0
1.2
1.5(2.5)
Axial(6.5/1.4)
RU 4DS
50
40 to +150
1.6
3.0
10
500
100
8.0
1.2
0.5
Axial(2.7/0.6)
ES01F
15
40 to +150
2.0
0.5
10
200 100(Ta)
1.5
10/10
0.6
10/20
20
0.2
0.5
Axial(2.7/0.78)
ES 1F
20
40 to +150
2.0
0.5
10
200 100(Ta)
1.5
10/10
0.6
10/20
17
0.3
1.5(2.5)
Axial(6.5/1.4)
RS 4FS
50
40 to +150
1.5
3.0
50
500
100
1.0 100/100
0.4
100/200
8.0
1.2
0.2
Axial(4.0/0.78)
RC 2
20
40 to +150
2.0
0.2
10
300
100
4.0
1.3
10/20
15
0.4
10/10
Diodes
209
IFSM
Tj
(A)
(C)
50Hz
Single Half Sine Wave
Tstg
(C)
VF
(V)
max
25
30
25
40 to +150
0.98
0.98
0.98
60
65
40 to +150
2.0
1.5
Surface-Mount (SJP)
Surface-Mount(SJP)
SJPX-H3
SJPL-F4
20
25
40 to +150
3.0
Surface-Mount(SJP)
SJPL-L4
30
40 to +150
1.3
500
1.0
3.0
Surface-Mount(SJP)
Surface-Mount(SJP)
20
50
40 to +150
1.4
1.4
Surface-Mount (SJP)
Surface-Mount (SJP)
Surface-Mount (TO220S) MPL-1036S
30
20
40 to +150
600
2.0
2.0
3.0
SJPD-D5*
SJPD-L5
SJPL-H6
SJPX-H6
50
40 to +150
VRM
(V)
200
300
400
Values in parentheses
are for the products
with heatsinks
1.0
1.5
2.0
Package
Surface-Mount (SJP)
Surface-Mount (SJP)
Surface-Mount (SJP)
Part
Number
SJPL-D2
SJPX-F2
SJPL-H2
40 to +150
40 to +150
40 to +150
40 to +150
40 to +150
40 to +150
0.98
0.98
1.3
1.3
1.5
1.5
1.75
IR(H)
trrq
trrw
IR
(mA)
(ns) IF/IRP (ns) IF/IRP
(A)
Tj
(mA)
(mA)
VR=VRM VR=VRM (C)
max
max
1.0
25
0.1 150
50 100/100
35 100/200
1.5
10
2.0 150
30 100/100
25 100/200
2.0
50
0.2 150
50 100/100
35 100/200
3.0
50
0.3 150
50 100/100
35 100/200
100
0.2 150(Ta)
40 100/100
30 100/200
5.0
IF
(A)
2.0
1.5
50
10
3.0
0.05
3.0
50
1.0
3.0
2.0
2.0
3.0
10
15
50
0.1
3.0
0.1
10
50
200
IF (AV)
(A)
Values in parentheses
are for the products
with heatsinks
20
20
20
0.072
0.072
0.072
20
2.5
0.072
1.4
20
20
0.072
0.072
30 100/100
50 100/100
25 100/200
35 100/200
0.1
150
50 100/100
35 100/200
20
0.072
0.1
0.15
150
40 100/100
50 100/100
30 100/200
35 100/200
20
20
0.072
0.072
50 100/100
30 100/100
50 100/100
35 100/200
20 100/200
20
20
2.5
0.072
0.072
150
150
150
150
1.4
*Under development
Package
Axial
(Body Diameter/Lead Diameter)
Part
Number
IFSM
Tj
(A)
(C)
50Hz
Single Half Sine Wave
Tstg
(C)
VF
(V)
max
IF
(A)
IR
IR(H)
(A)
(mA)
VR=VRM VR=VRM
max
max
Tj
(C)
trrq
(ns)
IF/IRP
(mA)
trrw
(ns)
IF/IRP
(mA)
Rth(j-l)
(C/W)
Mass
(g)
1.0
AL01Z
25
40 to +150
0.98
1.0
50
0.1
100
50 100/100
35 100/200
22
0.13
1.5
Axial2.7/0.6
EN01Z
50
40 to +150
0.92
1.5
10
2.0
150
100 100/100
50 100/200
20
0.2
1.5
Axial2.7/0.78
EL 1Z
25
40 to +150
0.98
1.5
50
0.1
100
50 100/100
35 100/200
17
0.3
1.5
Axial2.7/0.6
EL02Z
25
40 to +150
0.98
1.5
50
0.1
100
40 100/100
30 100/200
20
0.2
1.5
Axial4.0/0.78
RN 1Z
60
40 to +150
0.92
1.5
20
3.0
150
100 100/100
50 100/200
15
0.4
2.0
Axial4.0/0.78
RX 10Z
30
40 to +150
0.98
2.0
50
3.0
150
30 100/100
25 100/200
15
0.4
2.0
Axial4.0/0.78
RL 10Z
30
40 to +150
0.98
2.0
50
0.1 100(Ta)
50 100/100
35 100/200
15
0.4
2.0
Axial4.0/0.98
RL 2Z
30
40 to +150
0.98
2.0
50
0.1
150
50 100/100
35 100/200
12
0.6
2.0
Axial4.0/0.98
RN 2Z
70
40 to +150
0.92
2.0
50
4.0
150
100 100/100
50 100/200
12
0.6
3.5
Axial6.5/1.4
RL 4Z
80
40 to +150
0.95
3.5
150
0.5
150
50 100/100
35 100/200
8.0
1.2
3.5
Axial6.5/1.4
RN 4Z
120
40 to +150
0.92
3.5
50
6.0
150
100 100/100
50 100/200
8.0
1.2
35
40 to +150
0.98
2.5
50
0.1
150
40 100/100
30 100/200
4.0
2.1
35
40 to +150
0.98
2.5
50
10
150
30 100/100
25 100/200
4.0
2.1
5.0
TO-220F2Pin
FML-G12S
65
40 to +150
0.98
5.0
100
0.2
150
40 100/100
30 100/200
4.0
2.1
5.0
TO-220F2Pin
FMX-G12S
65
40 to +150
0.98
5.0
100
20
150
30 100/100
25 100/200
4.0
2.1
5.0
TO-220F2Pin
FMN-G12S
100
40 to +150
0.92
5.0
100
10 150(Ta)
100 100/100
50 100/200
4.0
2.1
100
40 to +150
1.2
5.0
100
20
150
25 500/500
4.0
2.1
10 TO-220FCenter-tap FML-22S
65
40 to +150
0.98
5.0
100
0.2
150
40 100/100
30 100/200
4.0
2.1
10 TO-220FCenter-tap FMX-22S
65
40 to +150
0.98
5.0
100
20 100(Ta)
30 100/100
25 100/200
4.0
2.1
10 TO-220FCenter-tap FMXA-2102ST
10
TO-220F2Pin
FML-G22S
150
40 to +150
0.98
10
200
0.4
150
40 500/500
30 500/1000
4.0
2.1
10
TO-220F2Pin
FMX-G22S
150
40 to +150
0.98
10
200
50 100(Ta)
30 500/500
25 500/1000
4.0
2.1
15 TO-220FCenter-tap FMX-22SL
100
40 to +150
0.98
7.5
150
30
150
30 500/500
25 500/1000
4.0
2.1
20 TO-220FCenter-tap FM2-2202
110
40 to +150
0.98
10
200
0.4
150
50 100/100
35 100/200
4.0
2.1
10
100
30
150
25 500/500
4.0
2.1
20
TO-220FCenter-tap FMXA-2202S
100
40 to +150
1.2
20
TO-3PFCenter-tap FML-4202S
150
40 to +150
0.98
10
10
0.4
150
40 500/500
30 500/1000
2.0
6.5
20
TO-3PFCenter-tap FMX-4202S
150
40 to +150
0.98
10
200
50
150
30 500/500
25 500/1000
2.0
6.5
20
TO-3PFCenter-tap FMXA-4202S*
100
40 to +150
1.2
10
100
30
150
25 500/500
20
TO-3PFCenter-tap FMXS-4202S
150
40 to +150
1.05
10
50
30
150
30 500/500
40
40 to +150
1.3
2.5
50
0.25 100(Ta)
70
40 to +150
1.3
5.0
100
0.2 100(Ta)
10 TO-220FCenter-tap FML-23S
75
40 to +150
1.3
5.0
100
0.2
10 TO-220FCenter-tap FMX-23S
65
40 to +150
1.3
5.0
50
15 TO-220FCenter-tap FMXA-2153S
75
40 to +150
1.3
7.5
75
100
40 to +150
1.3
10
100
40 to +150
1.3
20 TO-220FCenter-tap FMXA-2203S
100
40 to +150
TO-3PFCenter-tap FMXA-4203S
100
40 to +150
300
Mass
(g)
150
150(Ta)
Thru-Hole
VRM
(V)
Rth(j-l)
(C/W)
TO-220F2Pin
FML-G13S
20 TO-220FCenter-tap FMX-2203
20
20
TO-3PFCenter-tap FMX-4203S
2.0
6.5
25 500/1000
2.0
6.5
50 100/100
35 100/200
4.0
2.1
50 100/100
35 100/200
4.0
2.1
150
50 100/100
30 100/200
4.0
2.1
15
150
30 100/100
25 100/200
4.0
2.1
23
150
25 500/500
4.0
2.1
100
30 150(Ta)
30 500/500
25 500/1000
4.0
2.1
10
100
30
150
30 500/500
25 500/1000
2.0
6.5
1.3
10
100
30
150
25 500/500
4.0
2.1
1.3
10
100
30
150
25 500/500
2.0
6.5
*Under development
210
Diodes
VRM
(V)
IF (AV)
(A)
Values in parentheses
are for the products
with heatsinks
IFSM
(A)
50Hz
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
IR(H)
(mA)
(A)
VR=VRM VR=VRM
max
max
Tj
(C)
trrq
(ns)
IF/IRP
(mA)
trrw
(ns)
IF/IRP
(mA)
Rth(j-l)
(C/W)
Mass
(g)
f
Axial2.4/0.6
AG01
15
40 to +150
1.8
0.7
100
0.5 100(Ta)
100 100/100
50 100/200
22
0.13
0.7
f
Axial2.7/0.6
EG01
15
40 to +150
2.0
0.7
50
0.3
100
100 100/100
50 100/200
20
0.2
0.8
Axial2.7/0.78
EG 1
15
40 to +150
1.8
0.8
50
0.3
100
100 100/100
50 100/200
17
0.3
1.0
f
Axial2.4/0.6
20
40 to +150
1.4
1.0
10
0.05
150
50 100/100
35 100/200
22
0.13
1.2
f
Axial4.0/0.78
RG 10
50
40 to +150
1.8
1.5
500
2.5
150
100 100/100
50 100/200
15
0.4
1.2
f
Axial4.0/0.98
RG 2
50
40 to +150
1.8
1.5
500
2.5
150
100 100/100
50 100/200
12
0.6
1.5
f
Axial2.7/0.78
EL 1
40
40 to +150
1.3
1.5
10
0.05
150
50 100/100
35 100/200
17
0.3
2.0
f
Axial4.0/0.98
RL 2
35 100/200
AL01
40
40 to +150
1.3
2.0
10
0.1
150
50 100/100
50
40 to +150
1.5
5.0
50
15
150
20 500/500
35
40 to +150
2.0
2.5
500
1.5
100
100 100/100
40
40 to +150
1.3
2.5
50
0.1 100(Ta)
50 100/100
5.0
TO-220F2Pin
FMX-G14S
70
40 to +150
1.3
5.0
50
15
150
5.0
TO-220F2Pin
FML-G14S
70
40 to +150
1.3
5.0
100
0.2
5.0
TO-220F2Pin
FMN-G14S
70
40 to +150
1.0
5.0
50
40 to +150
2.0
5.0
TO-220F2Pin
FMXA-1054S
65
10 TO-220FCenter-tap FML-24S
70
10
TO-220F2Pin
FMXA-1104S
12
0.6
4.0
2.1
50 100/200
4.0
2.1
35 100/200
4.0
2.1
30 100/100
25 100/200
4.0
2.1
150
50 100/100
35 100/200
4.0
2.1
10
150
100 100/100
50 100/200
4.0
2.1
500
2.5
150
100 100/100
50 100/200
4.0
2.1
5.0
100
0.2 100(Ta)
50 100/100
35 100/200
4.0
2.1
100
30
150
25 500/500
4.0
2.1
40 to +150
1.3
100
40 to +150
1.5
10
20
TO-3PFCenter-tap FML-4204S
100
40 to +150
1.3
10
50
0.4
150
50 500/500
20
TO-3PFCenter-tap FMXA-4204S*
100
40 to +150
1.5
10
100
30
150
25 500/500
20
TO-3PFCenter-tap FMD-4204S
35 500/1000
2.0
6.5
2.0
6.5
100
40 to +150
1.4
10
20
0.2
150
50 500/500
30 500/1000
2.0
6.5
Axial2.7/0.6
EG01A
10
40 to +150
2.0
0.5
100
0.5
100
100 100/100
50 100/200
20
0.2
0.5
Axial2.4/0.6
AG01A
15
40 to +150
1.8
0.5
100
0.5 100(Ta)
100 100/100
50 100/200
22
0.13
0.6
Axial2.7/0.78
EG 1A
10
40 to +150
2.0
0.6
100
0.5
100
100 100/100
50 100/200
17
0.3
1.0
Axial4.0/0.78
RG 10A
50
40 to +150
2.0
1.0
500
1.0
150
100 100/100
50 100/200
15
0.4
1.0
Axial4.0/0.98
RG 2A
50
40 to +150
2.0
1.0
500
1.0
150
100 100/100
50 100/200
12
0.6
1.2
Axial4.0/0.98
RD 2A
30
40 to +150
1.55
1.2
50
0.1
150
50 100/100
35 100/200
12
0.6
3.0
50
40 to +150
2.0
3.0
500
3.0
150
70 500/500
35 500/1000
4.0
2.1
1.2
0.5
600
Part
Number
0.7
5.0
400
Package
Axial
(Body Diameter/Lead Diameter)
3.0
Axial6.5/1.4
RL 4A
80
40 to +150
1.5
3.0
50
0.1
150
50 500/500
35 500/1000
8.0
3.0
Axial6.5/1.4
RN 4A
50
40 to +150
1.3
3.0
50
5.0
150
100 100/100
50 100/200
8.0
1.2
4.0
TO-220F2Pin
FMG-G26S
50
40 to +150
2.5
4.0
500
3.0 100(Ta)
100 100/100
50 100/200
4.0
2.1
5.0
TO-220F2Pin
FMX-G16S
50
40 to +150
1.5
5.0
50
15
150
30 100/100
25 100/200
4.0
2.1
5.0
TO-220F2Pin
FML-G16S
50
40 to +150
1.5
5.0
100
0.5
150
50 500/500
35 500/1000
4.0
2.1
5.0
TO-220F2Pin
FMN-1056S
60
40 to +150
1.3
5.0
50
5.0
150
100 100/100
50 100/200
4.0
2.1
5.0
TO-220F2Pin
FMD-1056S*
90
40 to +150
1.7
5.0
10
0.1
150
50 500/500
35 500/1000
4.0
2.1
50
40 to +150
2.2
3.0
500
3.0
150
100 100/100
50 100/200
4.0
2.1
100
40 to +150
1.75
8.0
30
6.0
150
27 500/500
4.0
2.1
15
8.0
TO-220F2Pin
FMXK-1086S
10
TO-220F2Pin
FMX-1106S
50
40 to +150
1.5
5.0
50
150
30 100/100
25 100/200
4.0
2.1
10
TO-220F2Pin
FMX-G26S
100
40 to +150
1.5
10
100
20 150(Ta)
30 100/100
25 100/200
4.0
2.1
10
TO-220F2Pin
FMD-G26S
100
40 to +150
1.7
10
100
0.3 100(Ta)
50 500/500
30 500/1000
4.0
2.1
10
TO-220F2Pin
FMXA-1106S
100
40 to +150
1.98
10
100
30
150
28 500/500
4.0
2.1
10
TO-220F2Pin
FMNS-1106S
100
40 to +150
1.3
10
100
10
150
100 100/100
50 100/200
4.0
2.1
10
TO-220F2Pin
FMN-1106S
150
40 to +150
1.3
10
100
10
150
100 100/100
50 100/200
4.0
2.1
10
TO-220F2Pin
FMD-1106S*
180
40 to +150
1.7
10
20
0.2
150
50 500/500
35 500/1000
4.0
2.1
10
TO-220F2Pin
FMXK-1106S
100
40 to +150
1.75
10
100
10
150
27 500/500
20
TO-220F2Pin
FMN-1206S
150
40 to +150
1.3
20
200
20
150
150 500/500
20
TO-220FCenter-tap FMN-2206S
150
40 to +150
1.3
10
100
10
150
100 100/100
20
TO-220FCenter-tap FMXK-2206S
100
40 to +150
1.75
10
100
10
150
27 500/500
20
TO-220FCenter-tap FMXS-2206S
100
40 to +150
1.6
10
50
15
150
30 500/500
25 500/1000
4.0
2.1
20
TO-3PFCenter-tap FMD-4206S
100
40 to +150
1.7
10
100
0.3
150
50 500/500
30 500/1000
2.0
6.5
20
TO-3PFCenter-tap FMX-4206S*
100
40 to +150
1.5
10
100
20
150
30 500/500
2.0
6.5
20
TO-3PFCenter-tap FMXA-4206S*
100
40 to +150
1.98
10
100
30
150
28 500/500
2.0
6.5
FMN-3306S
150
40 to +150
1.3
30
200
20
150
150 500/500
100 500/1000
2.0
6.5
TO-3PFCenter-tap FMN-4306S
150
40 to +150
1.5
15
100
10
150
100 100/100
50 100/200
2.0
6.5
30
30
TO-3PF2Pin
4.0
2.1
100 500/1000
4.0
2.1
50 100/200
4.0
2.1
4.0
2.1
*Under development
Diodes
211
VRM
(V)
IF (AV)
(A)
Values in parentheses
are for the products
with heatsinks
Package
Axial
(Body Diameter/Lead Diameter)
Axial2.4/0.6
Part
Number
IFSM
(A)
50Hz
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
Tj
(C)
trrq
(ns)
IF/IRP
(mA)
trrw
(ns)
IF/IRP
(mA)
Rth(j-l)
(C/W)
Mass
(g)
10
40 to +150
2.0
0.5
10
0.2
150
200 100/100
80 100/200
22
0.13
50
40 to +150
3.0
3.0
100
0.5
150
70 500/500
35 500/1000
4.0
2.1
3.0
TO-220F2Pin
FMC-G28S
50
40 to +150
3.0
3.0
100
1.0
150
70 500/500
35 500/1000
4.0
2.1
5.0
TO-220F2Pin
FMC-G28SL
60
40 to +150
3.0
5.0
200
2.0
150
70 500/500
35 500/1000
4.0
2.1
Axial2.4/0.6
AP01C
5.0
40 to +150
4.0
0.2
100
0.5
100
200 100/100
80 100/200
22
0.13
0.2
Axial2.7/0.6
EP01C
5.0
40 to +150
4.0
0.2
5.0
0.05 100(Ta)
200 100/100
80 100/200
20
0.2
0.4
RU 1P
Axial4.0/0.78
10
40 to +150
4.0
0.4
5.0
0.5
150
100 100/100
50 100/200
15
0.4
0.5
Axial2.7/0.6
EG01C
10
40 to +150
3.3
0.5
50
0.5 100(Ta)
100 100/100
50 100/200
20
0.2
0.7
RG 1C
Axial4.0/0.78
10
40 to +150
3.3
0.7
20
0.25
150
100 100/100
50 100/200
15
0.4
2.0
Axial6.5/1.4
RG 4C
60
40 to +150
3.0
2.0
500
2.5
100
100 500/500
50 500/1000
8.0
1.2
3.0
TO-220F2Pin
FMG-G2CS
30
40 to +150
4.0
3.0
50
0.3
100
100 500/500
50 500/1000
4.0
2.1
1200
50
40 to +150
4.0
3.0
500
3.0
150
70 500/500
35 500/1000
4.0
2.1
1600
50
40 to +150
6.0
3.0
100
0.5
150
70 500/500
35 500/1000
4.0
2.1
2000
0.1
5.0
40 to +150
7.0
0.1
2.0
0.01
100
50
15
0.4
0.5
800
0.2
1000
212
Diodes
Axial4.0/0.78
AB01B
IR
IR(H)
(mA)
(A)
VR=VRM VR=VRM
max
max
RP 1H
100
10/20
10/20
40
60
90
IF (AV)
(A)
Package
Part Number
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
(mA)
VR=VRM
max
IR(H)
(mA)
VR=VRM
max
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
1.0
Surface-Mount (SJP)
SJPB-D4
30
-40 to +150
0.55
1.0
0.1
35
150
20
2.0
Surface-Mount (SJP)
SJPB-H4
50
-40 to +150
0.55
2.0
0.2
70
150
20
0.072
3.0
Surface-Mount (SJP)
SJPB-L4
60
-40 to +150
0.55
3.0
0.3
100
150
20
0.072
5.0
Surface-Mount (SJP)
SJPW-T4
80
-40 to +150
0.55
5.0
0.5
150
150
20
0.072
1.0
Surface-Mount (SJP)
SJPB-D6
20
-40 to +150
0.68
1.0
0.1
30
150
20
0.072
1.5
Surface-Mount (SJP)
SJPW-F6
25
-40 to +150
0.70
1.5
1.0
70
150
20
0.072
2.0
Surface-Mount (SJP)
SJPB-H6
40
-40 to +150
0.69
2.0
0.2
55
150
20
0.072
3.0
Surface-Mount (SJP)
SJPB-L6
50
-40 to +150
0.70
3.0
0.3
70
150
20
0.072
1.0
Surface-Mount (SJP)
SJPB-D9
20
-40 to +150
0.85
1.0
0.1
30
150
20
0.072
2.0
Surface-Mount (SJP)
SJPB-H9
40
-40 to +150
0.85
2.0
0.2
55
150
20
0.072
120
-40 to +150
0.85
10
1.0
100
150
2.5
1.04
IR(H)
(mA)
VR=VRM
max
35
100
0.072
Thru-Hole
VRM
(V)
40
IFSM
(A)
50Hz
Single Half Sine Wave
1.0
AK 04
25
-40 to +150
0.55
1.0
IR
(mA)
VR=VRM
max
5.0
150
22
0.13
1.0
EK 04
40
-40 to +150
0.55
1.0
5.0
35
150
20
0.3
1.5
EK 14
40
-40 to +150
0.55
1.5
5.0
50
150
17
0.3
1.7
RK 14
60
-40 to +150
0.55
2.0
5.0
70
150
15
0.45
2.5
RK 34
50
-40 to +150
0.55
2.5
5.0
100
150
12
0.6
FMB-G14
60
-40 to +150
0.60
3.0
2.0
70
150
4.0
2.1
RK 44
80
-40 to +150
0.55
3.0
5.0
100
150
8.0
1.2
FMB-24
50
-40 to +150
0.55
2.0
5.0
250
150
4.0
2.1
120
-40 to +150
0.55
5.0
1.0
150
150
8.0
1.2
IF (AV)
(A)
Package
Axial
(Body Diameter/Lead Diameter)
Part Number
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
3.0
TO-220F2Pin
3.0
4.0
TO-220F(Center-tap)
5.0
5.0
TO-220F2Pin
FMB-G14L
60
-40 to +150
0.55
5.0
5.0
175
150
4.0
2.1
6.0
TO-220F(Center-tap)
FMB-24M
60
-40 to +150
0.55
3.0
5.0
100
150
4.0
2.1
10
TO-220F(Center-tap)
FMB-24L
60
-40 to +150
0.55
5.0
5.0
175
150
4.0
2.1
10
TO-220F(Center-tap)
FMW-24L
100
-40 to +150
0.55
5.0
0.5
175
150
4.0
2.1
10
TO-220F2Pin
FMB-G24H
150
-40 to +150
0.55
10
10
350
150
4.0
2.1
15
TO-220F(Center-tap)
FMB-24H
100
-40 to +150
0.55
7.5
7.5
250
150
4.0
2.1
15
TO-220F(Center-tap)
FMW-24H
120
-40 to +150
0.55
7.5
7.5
250
150
4.0
2.1
20
TO-220F(Center-tap)
FMB-2204
150
-40 to +150
0.55
10
10
350
150
4.0
2.1
20
TO-220F(Center-tap)
FMW-2204
120
-40 to +150
0.55
10
1.0
350
150
4.0
2.1
30
TO-220F(Center-tap)
FMB-2304
150
-40 to +150
0.55
15
15
500
150
4.0
2.1
30
TO-3PF(Center-tap)
FMW-4304
150
-40 to +150
0.55
15
1.5
500
150
2.0
6.5
Diodes
213
RW 54
VRM
(V)
60
90
IF (AV)
(A)
Package
Axial
(Body Diameter/Lead Diameter)
Part Number
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
(mA)
VR=VRM
max
IR(H)
(mA)
VR=VRM
max
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
0.7
AK 06
10
-40 to +150
0.62
0.7
1.0
30
150
22
0.13
0.7
EK 06
10
-40 to +150
0.62
0.7
1.0
30
150
20
0.3
1.5
EK 16
25
-40 to +150
0.62
1.5
1.0
55
150
17
0.3
1.5
RK 16
25
-40 to +150
0.62
1.5
1.0
55
150
15
0.45
2.0
RK 36
40
-40 to +150
0.62
2.0
2.0
70
150
12
0.6
3.5
RK 46
70
-40 to +150
0.62
3.5
3.0
125
150
8.0
1.2
4.0
TO-220F(Center-tap)
FMB-26
40
-40 to +150
0.62
2.0
2.0
70
150
4.0
2.1
6.0
TO-220F2Pin
FMB-G16L
50
-40 to +150
0.72
6.0
5.0
200
150
4.0
2.1
10
TO-220F(Center-tap)
FMW-2106
100
-40 to +150
0.70
5.0
3.0
125
150
4.0
2.1
15
TO-220F(Center-tap)
FMW-2156
100
-40 to +150
0.70
7.5
5.0
175
150
4.0
2.1
20
TO-220F(Center-tap)
FMW-2206
120
-40 to +150
0.70
10
1.0
250
150
4.0
2.1
30
TO-220F(Center-tap)
FMB-2306
150
-40 to +150
0.70
15
8.0
400
150
4.0
2.1
30
TO-3PF(Center-tap)
FMW-4306
150
-40 to +150
0.70
15
3.0
350
150
2.0
6.5
0.7
AK 09
10
-40 to +150
0.81
0.7
1.0
30
150
22
0.13
0.7
EK 09
10
-40 to +150
0.81
0.7
1.0
30
150
20
0.3
1.5
EK 19
40
-40 to +150
0.81
1.5
2.0
55
150
17
0.3
1.5
RK 19
40
-40 to +150
0.81
1.5
2.0
55
150
15
0.45
2.0
RK 39
50
-40 to +150
0.81
2.0
3.0
70
150
12
0.6
3.5
RK 49
60
-40 to +150
0.81
3.5
5.0
125
150
8.0
1.2
FMB-29
50
-40 to +150
0.81
2.0
3.0
55
150
4.0
2.1
FMB-G19L
60
-40 to +150
0.81
4.0
5.0
125
150
4.0
2.1
FMB-29L
60
-40 to +150
0.81
4.0
5.0
125
150
4.0
2.1
IR(H)
(mA)
VR=VRM
max
Tj
(C)
4.0
TO-220F(Center-tap)
4.0
TO-220F2Pin
8.0
TO-220F(Center-tap)
Low VF A Series
Surface-Mount
VRM
(V)
30
IF (AV)
(A)
Package
Part Number
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
(mA)
VR=VRM
max
30
214
Mass
(g)
1.0
Surface-Mount (SJP)
SJPA-D3
30
-40 to +125
0.36
1.0
1.5
70
100
20
2.0
Surface-Mount (SJP)
SJPA-H3*
40
-40 to +125
0.36
2.0
3.0
140
100
20
0.072
3.0
Surface-Mount (SJP)
SJPA-L3
70
-40 to +125
0.36
3.0
4.5
210
100
20
0.072
IF (AV)
(A)
2.0
Diodes
0.072
*Under development
Thru-Hole
VRM
(V)
Rth(j-l)
Rth(j-c)
(C/W)
Package
Axial
(Body Diameter/Lead Diameter)
Axial(4.0/0.78)
Part Number
RA 13
IFSM
(A)
50Hz
Single Half Sine Wave
50
Tj
(C)
Tstg
(C)
-40 to +125
VF
(V)
max
0.36
IF
(A)
2.0
IR
(mA)
VR=VRM
max
IR(H)
(mA)
VR=VRM
max
Tj
(C)
3.0
140
100
Rth(j-l)
Rth(j-c)
(C/W)
15
Mass
(g)
0.45
Low IR E Series
Surface-Mount
VRM
(V)
IF (AV)
(A)
Package
Axial
(Body Diameter/Lead Diameter)
Part Number
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
(mA)
VR=VRM
max
IR(H)
(mA)
VR=VRM
max
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
30
2.0
Surface-Mount (SJP)
SJPE-H3*
40
-40 to +150
0.55
2.0
0.2
70
150
20
0.072
40
2.0
Surface-Mount (SJP)
SJPE-H4
40
-40 to +150
0.6
2.0
0.05
20
150
20
0.072
*Under development
Thru-Hole
VRM
(V)
IF (AV)
(A)
80
100
150
Package
Part Number
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
(mA)
VR=VRM
max
IR(H)
(mA)
VR=VRM
max
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
20
TO-220F(Center-tap)
FMEN-2208
120
-40 to +150
0.76
10
0.2
100
150
4.0
2.1
30
TO-220F(Center-tap)
FMEN-2308
150
-40 to +150
0.765
15
0.3
150
150
4.0
2.1
10
TO-220F(Center-tap)
FMEN-210A
100
-40 to +150
0.85
5.0
0.1
50
150
4.0
2.1
15
TO-220F(Center-tap)
FMEN-215A*
100
-40 to +150
0.85
7.5
0.15
75
150
4.0
2.1
20
TO-220F(Center-tap)
FMEN-220A
120
-40 to +150
0.85
10
0.2
100
150
4.0
2.1
20
TO-3PF(Center-tap)
FMEN-420A*
120
-40 to +150
0.85
10
0.2
100
150
2.0
6.5
30
TO-220F(Center-tap)
FMEN-230A
150
-40 to +150
0.85
15
0.3
150
150
4.0
2.1
30
TO-262
MPEN-230AF
150
-40 to +150
0.90
15
0.25
125
150
1.5
1.55
30
TO-3PF(Center-tap)
FMEN-430A
150
-40 to +150
0.85
15
0.3
150
150
2.0
6.5
10
TO-220F(Center-tap)
FMEN-210B
100
-40 to +150
0.92
5.0
0.1
25
150
4.0
2.1
20
TO-220F(Center-tap)
FMEN-220B
120
-40 to +150
0.92
10
0.2
50
150
4.0
2.1
20
TO-3PF(Center-tap)
FMEN-420B*
120
-40 to +150
0.85
10
0.2
100
150
2.0
6.5
30
TO-220F(Center-tap)
FMEN-230B
150
-40 to +150
0.92
15
0.3
75
150
4.0
2.1
*Under development
30
IF (AV)
(A)
Package
Part Number
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
(mA)
VR=VRM
max
IR(H)
(mA)
VR=VRM
max
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
1.0
Surface-Mount (SJP)
SJPJ-D3
30
-40 to +150
0.45
1.0
0.1
35
150
20
0.072
2.0
Surface-Mount (SJP)
SJPJ-H3*
50
-40 to +150
0.45
2.0
0.2
70
150
20
0.072
3.0
Surface-Mount (SJP)
SJPJ-L3
60
-40 to +150
0.45
3.0
0.3
150
150
20
0.072
*Under development
Thru-Hole
VRM
(V)
30
IF (AV)
(A)
Package
Axial
(Body Diameter/Lead Diameter)
Part Number
RJ 43
IFSM
(A)
50Hz
Single Half Sine Wave
Tj
(C)
Tstg
(C)
VF
(V)
max
IF
(A)
IR
(mA)
VR=VRM
max
IR(H)
(mA)
VR=VRM
max
Tj
(C)
Rth(j-l)
Rth(j-c)
(C/W)
Mass
(g)
3.0
Axial(6.5/1.4)
50
-40 to +150
0.45
3.0
3.0
100
150
8.0
1.2
10
TO-220F(Center-tap)
FMJ-23L
100
-40 to +150
0.45
5.0
5.0
175
150
4.0
2.1
30
TO-220F(Center-tap)
FMJ-2303
150
-40 to +150
0.48
15
15
500
150
4.0
2.1
Diodes
215
PR
(W)
Package
IR
( A)
max
Mass(g)
283
50 (5ms)
Surface-Mount(SJP)
18.8 to 21.2
Surface-Mount(SJP)
-55 to +150
10
0.07
-55 to +150
10
31.0 to 35.0
0.07
-55 to +150
10
0.07
-55 to +150
0.07
20
-55 to +150
0.07
SJPZ-N33
25
-55 to +150
0.07
Surface-Mount(SJP)
SJPZ-N40*
30
-55 to +150
0.07
Surface-Mount(SZ-10)
SZ-10N27
22
70
Fig.1
-55 to +175
10
2.55
36 to 44
Surface-Mount(SZ-10)
SZ-10N40*
22
40
Fig.1
-55 to +175
10
2.55
24 to 30
Surface-Mount(SZ-10)
SZ-10NN27
22
90
Fig.1
-55 to +175
10
2.55
36 to 44
Surface-Mount(SZ-10)
SZ-10NN40
22
55
Fig.1
-55 to +175
10
P
(W)
Tj
VDC
(V)
IZSM
(A)
SJPZ-K28
20
SJPZ-E20
15
Surface-Mount(SJP)
SJPZ-E33
25
16.8 to 19.1
Surface-Mount(SJP)
SJPZ-N18
13
25.1 to 28.9
Surface-Mount(SJP)
SJPZ-N27
31.0 to 35.0
Surface-Mount(SJP)
37.8 to 42.2
24 to 30
95 (500 s)
500 (500 s)
Part Number
Conditions
Tstg
(C)
2.55
*Under development
Figure1
IZSM Condition
IRSM
IRSM
2
216
Diodes
10ms
Time
IF
(mA)
1000 VR-60SS
2.30.25
ITSM
(A)
50Hz
Single Half Sine Wave
VF
(V)
20
0.2
Tj
(C)
Tstg
(C)
Rth(j-l)
(C/W)
Mass
(g)
Package
15
-40 to +100
20
0.3
Axial(2.7/0.6)
7.5
-40 to +100
20
0.3
Axial(2.7/0.6)
2.750.25
10 VR-61SS
3.10.25
70
2.0max
IF
(A)
max
Part Number
100 SV-3SS
1.80.2
50
0.6
-40 to +100
20
0.3
Axial(2.7/0.6)
50
0.9
-40 to +100
20
0.3
Axial(2.7/0.6)
2.150.2
10 SV-4SS
2.40.25
30
Part Number
VR-60SS
VR-61SS
Orange
Orange
SV-3SS
White
SV-4SS
White
Display Color
Red
Internal Connection
Diodes
217
4.50.2
(0.4)
(5)
1.30.1
1.20.2
(15)
4.440.2
(1.4)
4.50.2
9.90.2
1.30.2
(4.6)
10.20.3
9.10.3
10.5 +0.3
0.5
(3)
0.10.15
15.30.3
+0.1
1.40.2
10.00.2
2.40.2
(R0.3)
2.00.1
0.86 +0.2
0.1
4.90.2
1.270.1
2.54
q
+0.3
1.20.2
a: Part Number
b: Polarity
c: Lot No.
0.5
2.54
+0.2
0.86 0.1
2.540.5
0.40.1
3.0 0.5
+0.3
0.5
3.0 0.5
1.20.2
0.40.1
5.00.3
a: Part Number
b: Polarity
c: Lot No.
2.540.5
q
100.3
2.59
1.270.2
+0.2
0.86 0.1
20.3
0.2
9.60.5
1.270.2
50.3
+0.2
0.1 0.1
3.90.5
(1.5)
2.590.2
8.50.5
100.3
10.00.3
5.00.3
(4.6)
(2.5)
1.10.5
1.30.2
2.70.3
7.20.5
0.6 0.05
0.6
0.57 0.02
62.3 1.0
5.0 0.2
62.3 0.7
2.9 0.1
50.0 1.0
2.4 0.1
5.0 0.2
Cathode band
Cathode band
2.70.2
2.7 0.2
0.78 0.05
0.98 0.05
0.78 0.05
Cathode band
Cathode band
4.0 0.2
218
Diodes
7.2 0.2
62.5 0.7
7.2 0.2
62.5 0.7
5.0 0.2
62.3 0.7
Cathode band
2.7 0.2
(9.75)
(1.4)
a
+0.2
0.1 0.1
4.440.2
(1.5)
+0.3
10.0 0.5
(1.5)
8.60.3
10.20.3
1.30.2
+0.3
4.440.2
(1.4)
10.20.3
10.0 0.5
2.540.1
(Measured at the root)
0.50.1
2.54TYP
(0.4)
2.54TYP
2.540.1
(Measured at the root)
0.80.1
0.40.1
1.34 +0.2
0.1
2.540.3
(0.75)
15.50.5
1.50.2
13.50.3
1.30.4
+0.4
5.0 0.1
(1.5)
8.60.3
1.30.4
(1.2)
2.15 0.2
+0.1
0.050.05
9.20.2
4.0 0.2
30.5
2.00.5
( 1.5 Dp0.2)
(0.45)
2.60.2
(3)
4.2 0.2
C
2.80.2 0.5
0.80.2
13.0min
0.2
3.9
6.5 0.2
1.350.15
1.350.15
0.85+0.2
0.1
0.45+0.2
0.1
2.40.2
2.54
2.54
S type
4.00.2
3.2 0.2
a
b
c
0.2
3.2 0.2
a
b
c
3.9
4.00.2
16.90.3
8.40.2
50 0.1
8.0 0.2
Cathode band
1.350.15
1.350.15
0.85+0.2
0.1
0.45+0.2
0.1
2.54
U type
R type
4.20.2
C
2.80.2 0.5
10.00.2
16.90.3
8.40.2
10.00.2
1.4 0.1
0.80.2
13.0min
S type
R type
a: Part Number
b: Polarity
c: Lot No.
5.08
0.45
5.08
0.2
0.8
3.30.2
a
b
(16.2)
3.3
3.0
16.9
2.6
(13.5)
3.9
(13.5)
1.35
0.85
5.50.2
3.450.2
15.60.2
4.0
8.4
16.9
4.0
8.4
3.9
1.35
0.85
2.2
2.6
0.8
2.2
3.2 0.2
5.5
10.0
No. 18 TO-3PF
1.6
4.2
2.8
3.2 0.2
0.8
10.0
a: Part Number
b: Polarity
c: Lot No.
23.0 0.3
9.5 0.2
No. 16 TO-220F2Pin
2.40.2
2.54
0.45
0.8
1.750.15
2.150.15
1.05+0.2
-0.1
5.450.1
1.5
5.450.1
4.4
0.65+0.2
-0.1
3.350.2
1.5
a: Part Number
b: Lot No.
No. 19 TO-3PF2Pin
0.8 0.2
5.50.2
3.450.2
5.5
23.00.2
9.50.2
15.60.3
3.0
3.3 0.2
3.3
1.6
a
b
c
0.8
(16.2)
1.750.15
1.05+0.2
0.1
0.1
5.45
5.450.1
0.65+0.2
0.1
3.350.2
a: Part Number
b: Polarity
c: Lot No.
Diodes
219
220
Diodes
DC/DC
Power Modules
Ordering Information
All products listed must be ordered in standard packing increments.
Package
MPM01
Product Name
ZIP 9
50
MPM04
ZIP 9
50
BR200
42
BR201
42
BR202
30
BR203
30
BR204
42
BR205
42
BR206
30
BR300
50
BR301
50
Selection Guide
Mold type
Part Number
Package
Size (LWH)
Input Voltage
Output Voltage
Output Current
Oscillation Frequency
[mm]
[V]
[V]
[A]
[kHz]
Remarks
Page
MPM01
ZIP9
24235.5
9 to 40
1.8 to 12
250
224
MPM04
ZIP9
24235.5
16 to 40
12 to 24
250
224
Size (LW)
Height
Input Voltage
Output Voltage
Output Current
Oscillation Frequency
[mm]
[mm]
[V]
[V]
[A]
[kHz]
Remarks
Page
BR200
20.3211.43
4.2
1210%
0.75 to 1.65
10
300
BR201
20.3211.43
4.2
1210%
1.60 to 3.63
10
600
BR202
33.0213.46
4.2
1210%
0.75 to 1.65
20
300
BR203
33.0213.46
4.2
1210%
1.60 to 3.63
20
400
BR204
20.3211.43
4.2
1210%
1.60 to 5.50
10
600
226
BR205
20.3211.43
4.2
4.5 to 7.0
0.75 to 3.63
10
600
230
BR206
33.0213.46
4.2
4.5 to 7.0
0.75 to 3.63
20
500
232
Size (LW)
Height
Input Voltage
Output Voltage
Output Current
Oscillation Frequency
[mm]
[mm]
[V]
[V]
[A]
[kHz]
226
228
1414
4.2
8 to 30
5.0
1.0
350
BR301
1414
4.2
8 to 30
3.3
1.0
350
222
Remarks
Page
234
Application Note
<Mold Type>
Thermal Design
:
:
:
:
:
:
:
:
Mounting Torque
MPM01/04
0.588 to 0.785[Nm]
Other notes
Devices cannot be operated connected in parallel in order to obtain a
larger current.
Module power supplies cannot be used for current boosting or voltage
step-up applications.
223
Parameter
VIN Pin Voltage
FB Pin Voltage
Vo Pin Voltage
Vo Pin Voltage
VIN-SW Voltage
Junction Temperature*1
Storage Temperature
Thermal Resistance
(Between MIC Junction and Frame)
Symbol
VIN
VFB
Vo
Vo
VVINSW
Tj
Tstg
Ratings
0.3 to 41
0.3 to 6
0.3 to 13
0.3 to 28.8
55
20 to 150
20 to 120
Unit
V
V
V
V
V
C
C
jf
7.7
C/W
Remarks
MPM01
MPM04
*1: Limited by thermal protection circuit. The thermal protection detection temperature is approx. 160C.
Applications
FA equipment, communication equipment
Symbol
VIN
VIN
Io
Tjop
Ta
Ratings
min.
Vo+4*4
Vo+4
30
36
0
20
20
max.
40
40
40
40
3
125
85
Unit
V
V
V
V
A
C
C
Conditions
With derating
*2: The recommended operating conditions show the operating conditions required to maintain normal circuit functions as
shown in the electrical characteristics.
In actual operation, the device must be used within the recommended operating conditions.
*3: But the device must be used within the derating curve.
*4: The minimum value of the input voltage range is the higher of 9V or Vo+4V.
Electrical Characteristics
(Ta = 25C)
Parameter
Symbol
Reference Voltage
Efficiency*6
Oscillation Frequency
Line Regulation*7
Load Regulation*7
Overcurrent Protection Starting Current
Circuit Current
MIC Thermal Protection Start Temperature*9
Input Voltage Undervoltage Protection
VFBref
fo
Vline
Vload
Is
Iin
Tj
UVLO
min.
0.490
212
3.2
151
Ratings
typ.
0.500
91
250
5.60
12
160
7.3
Tstart
50
max.
0.510
288
2
3
7.0
8.0
Unit
V
%
kHz
%
%
A
mA
C
V
ms
Conditions
VIN=33V, Io=1A
VIN=33V, Vo=12V, Io=3A
VIN=33V, Vo=12V, Io=3A
VIN=16 to 40V, Vo=12V, Io=1A
VIN=33V, Vo=12V, Io=0 to 3A
VIN=33V, Vo=12V, Drooping/Auto restore*8
VIN=33V, Io=0A, VFB=1V
VIN=16V to 40V
VIN=16 to 40V. Time from VIN application to when
VO reaches constant voltage precision
*5: The electrical characteristics are characteristic values guaranteed when the IC is operated under the measurement conditions shown for each of the items in the table above.
*6: The efficiency is calculated by Formula 1.
(%) =
Vo Io
VIN Iin
*7: The line/load regulations do not include the setting deviation of the output voltage. The output voltage setting deviation is affected by the precision of the external RFB.
*8: When an output voltage of other than VO=12V is set, the OCP operation point may fluctuate compared to the point when VO=12V because the inductance of the built-in coil is
constant and the frequency is constant for the specified output voltage.
*9: Auto restore is used for thermal protection.
224
MPM Series
(Unit : mm)
15.50.2
3.20.2
5.50.2
50.2
Gate burr
3.30.5
10.10.5
(7)
3.3
3.30.1
(Measured at the root)
R-end
2-(R1.3)
3.10.5
R-end
2.15+0.2
0.1
Pin Assignment
q GND
w VIN
e GND
r FB
t OUT
y OUT
u OUT
i SW
o SW
230.3
MPM**
Lot.No
1.35+0.2
0.1
0.85+0.2
0.1
0.65+0.2
0.1
4.50.7
(Measured at the tip)
8P2.540.1=(20.32)
(Measured at the root)
24.20.2
Package center
0.4
1 2
3 4 5 6
7 8 9
Block Diagram
io
SW
VIN
SVIN
BS
SW
Built-in
coil
EN_SS
VO
FB
R3
AGND COMP
PGND LS_GATE
Low side
SW element
VIN
GND
qe
FB
r
OUT
t yu
wVIN
tOUT
yOUT
uOUT
MPM series
C1
C2
C1
: 50V/1000F
C2, C3 : 25V/1000F2 in parallel
C3
Load
RFB
225
BR200 Series 12V System, For Intermediate Bus, Output 10A Type POL Converter Module
Features
Lineup
Product Name
Vo[V]
0.75 to 1.65
1.60 to 3.63
1.60 to 5.50
BR200
BR201
BR204
Io[A]
10
10
10
High power
High efficiency
BR200: 89.9%typ. (Vin=12.0V, Vo=1.5V, Io=7A)
BR201: 93.8%typ. (Vin=12.0V, Vo=3.3V, Io=7A)
BR204: 95.5%typ. (Vin=12.0V, Vo=5.0V, Io=7A)
Environmental Conditions
40 to 85C
20 to 85%
40 to 85C
10 to 95%
Applications
Pin
1
Symbol
ON/OFF
PG
Communication equipment
Servers
Other
Ratings
7
7
7
Electrical Characteristics
Output Current
Vin
Vout
Vout
Vout
IO
min.
10.8
0.75
1.60
1.60
0
max.
13.2
1.65
3.63
5.50
10
Vo tol
2.0
2.0
85.5
93.2
95.0
300
600
600
24.5
1.5
1.0
0.7
50
50
50
Symbol
Ripple Voltage
Efficiency
Oscillation Frequency
BR200
BR201
BR204
BR200
BR201
BR204
BR200
BR201
BR204
BR200
BR201
BR204
Overcurrent Protection
Rising Time
Vrip
Eff
Eff
Eff
frq
OCP
BR200
BR201
BR204
Tr
226
Non condensing
Unit
V
V
mA
Remarks
Sink current
Ratings
typ.
12.0
Parameter
Unit
V
V
V
V
A
%
mVpp
Remarks
Adjusted by Rtrim
Adjusted by Rtrim
Adjusted by Rtrim
With temperature derating
Vin=10.8 to 13.2V, 0 to Iomax, Operating temperature range,
Rtrim=1% precision
Vout=1.2V*1
Vout=3.3V*2
Vout=5.0V*2
Vin=12V, Io=10A, Vo=1.5V
Vin=12V, Io=10A, Vo=3.3V
Vin=12V, Io=10A, Vo=5.0V
kHz
A
ms
Hiccup
Vo=10 to 90%
BR200 Series
External Dimensions
(Unit : mm)
20.320.5
11.430.5
4.2Max
Vpg(5V)
BR200/201/204
Vs+
ON/OFF
PowerGood
PG
Vout
Vin
Vin
Rtrim
Vout
GND
ON/OFF
Cin
Cout
Rtrim
GND
Place the input/output capacitors near the input and output pins
of the DC/DC converter.
Reference Data
BR201 Vo=3.3V
Efficiency v.s Output current
BR204 Vo=5V
Efficiency v.s Output current
100
100
80
80
80
60
Vin=10.8V
40
Vin=12.0V
20
Vin=13.2V
60
Vin=10.8V
40
Vin=12.0V
20
Vin=13.2V
0
0
5
Io (A)
10
Efficiency (%)
100
Efficiency (%)
Efficiency (%)
BR200 Vo=1.6V
Efficiency v.s Output current
60
Vin=10.8V
40
Vin=12.0V
20
Vin=13.2V
0
5
Io (A)
10
10
Io (A)
227
BR200 Series 12V System, For Intermediate Bus, Output 20A Type POL Converter Module
Features
Lineup
Product Name
Vo[V]
0.75 to 1.65
1.60 to 3.63
BR202
BR203
Io[A]
20
20
High power
High efficiency
BR202: 88.5%typ. (Vin=12.0V, Vo=1.2V, Io=11A)
BR203: 93.4%typ. (Vin=12.0V, Vo=3.3V, Io=12A)
Environmental Conditions
Applications
40 to 85C
20 to 85%
40 to 85C
10 to 95%
Communication equipment
Pin
Servers
Other
Symbol
ON/OFF
PG
Ratings
7
7
7
Electrical Characteristics
Parameter
Output Voltage
BR202
BR203
Output Current
Output Voltage Precision
Ripple Voltage
Efficiency
Oscillation Frequency
BR202
BR203
BR202
BR203
BR202
BR203
Overcurrent Protection
Rising Time
min.
10.8
0.75
1.60
0
Vo tol
2.0
2.0
15
25
86.1
92.3
300
400
30
2.0
1.5
100
100
Vrip
Eff
Eff
frq
Tr
228
Ratings
typ.
12.0
Vin
Vout
Vout
IO
OCP
BR202
BR203
Non condensing
Unit
V
V
mA
Remarks
Sink current
Symbol
max.
13.2
1.65
3.63
20
Unit
V
V
V
A
%
mVpp
%
Remarks
Adjusted by Rtrim
Adjusted by Rtrim
With temperature derating
Vin=10.8 to 13.2V, 0 to Iomax, Operating temperature range,
Rtrim=1% precision
Vout=1.2V*1
Vout=3.3V*1
Vin=12V, Io=20A, Vo=1.2V
Vin=12V, Io=20A, Vo=3.3V
kHz
A
ms
Hiccup
Vo=10 to 90%
BR200 Series
External Dimensions
(Unit : mm)
33.020.5
4.2 or less
0.85+0.15
(14.7)
(7.4)
13.460.5
L1 position
Vpg(5V)
BR202/203
ON/OFF
PowerGood
PG
Vin
Vin
Vs+
Vout
Vout
Rtrim
GND
ON/OFF
Cout
Cin
Rtrim
GND
Place the input/output capacitors near the input and output pins
of the DC/DC converter.
Reference Data
BR203 Vo=3.3V
Efficiency v.s Output current
100
100
80
80
60
Efficiency (%)
Efficiency (%)
BR202 Vo=1.2V
Efficiency v.s Output current
Vin=10.8V
40
Vin=12.0V
20
Vin=13.2V
60
Vin=10.8V
40
Vin=12.0V
20
Vin=13.2V
0
0
10
Io (A)
20
10
20
Io (A)
229
BR200 Series 5V System, For Intermediate Bus, Output 10A Type POL Converter Module
Features
Lineup
Product Name
Vo[V]
0.75 to 3.63
BR205
Io[A]
10
Applications
Environmental Conditions
Operating Temperature Range
Operating Humidity Range
Storage Temperature Range
Storage Humidity Range
40 to 85C
20 to 85%
40 to 85C
10 to 95%
Communication equipment
Pin
Servers
Other
Symbol
ON/OFF
PG
Ratings
7
7
7
Electrical Characteristics
Parameter
Symbol
Vin
Vout
IO
Ratings
typ.
5.0
max.
7.0
3.63
10
Unit
V
V
A
Vo tol
2.0
2.0
Ripple Voltage
Vrip
Eff
94.5
87.8
600
24.5
0.5
50
mVpp
Efficiency
frq
OCP
Tr
230
Non condensing
Unit
V
V
mA
Remarks
Sink current
min.
4.5
0.75
0
Oscillation Frequency
Overcurrent Protection
Rising Time
%
kHz
A
ms
Remarks
Adjusted by Rtrim
With temperature derating
Vin=4.5 to 7.0V, 0 to Iomax, Operating temperature range,
Rtrim=1% precision
Vout=1.2V*1
Vin=5.0V, Io=10A, Vo=3.3V
Vin=5.0V, Io=10A, Vo=1.5V
Hiccup
Vo=10 to 90%
BR200 Series
External Dimensions
(Unit : mm)
20.320.5
11.430.5
4.2Max
Vpg(5V)
BR205
Vs+
ON/OFF
PowerGood
PG
Vin
Vin
Vout
Vout
Rtrim
GND
ON/OFF
Cout
Cin
Rtrim
GND
Place the input/output capacitors near the input and output pins
of the DC/DC converter.
Reference Data
BR205 Vo=3.3V
Efficiency v.s Output current
Efficiency (%)
100
80
60
Vin=4.5V
40
Vin=5.0V
20
Vin=5.5V
0
0
2.0
4.0
6.0
8.0
10.0
Io [A]
231
BR200 Series 5V System, For Intermediate Bus, Output 20A Type POL Converter Module
Features
Lineup
Product Name
Vo[V]
0.75 to 3.63
BR206
Io[A]
20
Applications
Environmental Conditions
Operating Temperature Range
Operating Humidity Range
Storage Temperature Range
Storage Humidity Range
40 to 85C
20 to 85%
40 to 85C
10 to 95%
Communication equipment
Pin
Servers
Other
Symbol
ON/OFF
PG
Ratings
7
7
7
Electrical Characteristics
Parameter
Symbol
Vin
Vout
IO
Ratings
typ.
5.0
max.
7.0
3.63
20
Unit
V
V
A
Vo tol
2.0
2.0
Ripple Voltage
Vrip
Eff
93.7
85.9
400
30
2.0
50
mVpp
Efficiency
frq
OCP
Tr
232
Non condensing
Unit
V
V
mA
Remarks
Sink current
min.
4.5
0.75
0
Oscillation Frequency
Overcurrent Protection
Rising Time
%
kHz
A
ms
Remarks
Adjusted by Rtrim
With temperature derating
Vin=4.5 to 7.0V, 0 to Iomax, Operating temperature range,
Rtrim=1% precision, VO=1.5V or less
Vout=1.2V*1
Vin=5.0V, Io=20A, Vo=3.3V
Vin=5.0V, Io=20A, Vo=1.2V
Hiccup
Vo=10 to 90%
BR200 Series
External Dimensions
(Unit : mm)
33.020.5
4.2 or less
0.85+0.15
(14.7)
(7.4)
13.460.5
L1 position
Vpg(5V)
BR206
ON/OFF
Vs+
PowerGood
PG
Vout
Vin
Vin
Rtrim
Vout
GND
ON/OFF
Cin
Cout
Rtrim
GND
Place the input/output capacitors near the input and output pins
of the DC/DC converter.
Reference Data
BR206 Vo=3.3V
Efficiency & Output current
Efficiency (%)
100
80
Vin=4.5V
60
Vin=5.0V
40
Vin=5.5V
20
Vin=7.0V
0
0
10
15
20
Io (A)
233
Lineup
Product Name
Vo[V]
5.0
3.3
BR300
BR301
Io[A]
1.0
1.0
All-in-one
Free design
Environmental Conditions
High efficiency
BR300: 91%typ. (Vin=8V, Io=0.6A)
BR301: 87%typ. (Vin=8V, Io=0.6A)
Downsizing achieved by using high frequency switching
technology
Protection functions
Overcurrent Protection
Thermal protection
20 to 85C
10 to 90%
25 to 85C
5 to 95%
Pin
42
Symbol
VIN
Ratings
0.3 to +35
Unit
V
Remarks
Applications
FA equipment
Communication equipment
Consumer equipment
Other
Pin
Symbol
42
12
VIN
IO
Ratings
min.
8
0
Unit
max.
30
1
Remarks
V
A
Electrical Characteristics
Ratings
Parameter
Input Current
Standby Power
Output Voltage
Constant Voltage Precision
Output Current
Maximum Output Power
Output Ripple
Output Noise
Output Overcurrent Protection
234
Pin
42
42
12
12
12
12
12
12
12
Symbol
IIN
PSTB
VO
VACC
IO
PO(MAX)
VRIP
VNOISE
IOCP
min.
3
0
1.1
BR300
typ.
0.24
0.16
5.0
50
50
max.
3
1
5
min.
3
0
1.1
BR301
typ.
0.17
0.13
3.3
50
50
Unit
max.
3
1
3.3
A
W
V
%
A
W
mVPP
mVPP
A
Remarks
VIN=24V, IO=1A
VIN=24V, IO=0A
VIN=24V, IO=1A
VIN=24V, IO=1A
BR300 Series
External Dimensions
(Unit : mm)
11 or less
140.3
4-0.80.05
(1.2)
(3.4)
1.6
(5)
10.160.15
140.5
7.620.15
NOTES:
1) Unit: mm
2) Tolerance is 0.3mm unless otherwise specified.
3) Dimensions in parentheses are reference dimensions.
4) Pb-free device (RoHS compliant).
2.5 or less
(Bottom View)
VIN
Block Diagram
Vo
3 NC
4
VIN
BR300/301
GND
Co Load
NC
VIN:8V - 30V
Vo
Regulator IC
+
CIN
220F
2 GND
Reference Data
BR300
BR301
Efficiency
100
80
80
Efficiency (%)
Efficiency (%)
Efficiency
100
60
VIN=8V
40
VIN=12V
20
60
VIN=8V
40
VIN=12V
20
VIN=24V
VIN=24V
VIN=30V
VIN=30V
0
0.0
0.2
0.4
Io (A)
0.6
0.8
1.0
0.0
0.2
0.4
0.6
0.8
1.0
Io (A)
235
Category
Description
Page
Part No.
Category
Description
Page
2SA1186
Transistor
160
2SC4024
Transistor
162
2SA1215
Transistor
160
2SC4131
Transistor
162
2SA1216
Transistor
160
2SC4138
Transistor
162
2SA1294
Transistor
160
2SC4140
Transistor
162
2SA1295
Transistor
160
2SC4153
Transistor
162
2SA1303
Transistor
160
2SC4300
Transistor
162
2SA1386
Transistor
160
2SC4301
Transistor
162
2SA1386A
Transistor
160
2SC4304
Transistor
162
2SA1488
Transistor
General Purpose
160
2SC4381
Transistor
162
2SA1488A
Transistor
General Purpose
160
2SC4382
Transistor
162
2SA1492
Transistor
160
2SC4388
Transistor
162
2SA1493
Transistor
160
2SC4445
Transistor
162
2SA1494
Transistor
160
2SC4466
Transistor
162
2SA1567
Transistor
160
2SC4467
Transistor
162
2SA1568
Transistor
160
2SC4468
Transistor
162
2SA1667
Transistor
160
2SC4495
Transistor
162
2SA1668
Transistor
160
2SC4511
Transistor
162
2SA1673
Transistor
160
2SC4518
Transistor
162
2SA1693
Transistor
160
2SC4518A
Transistor
162
2SA1694
Transistor
160
2SC4546
Transistor
162
2SA1695
Transistor
160
2SC4706
Transistor
162
2SA1725
Transistor
160
2SC4883
Transistor
162
2SA1746
Transistor
General Purpose
160
2SC4883A
Transistor
162
2SA1859
Transistor
160
2SC4886
Transistor
162
2SA1859A
Transistor
160
2SC5071
Transistor
162
2SA1860
Transistor
160
2SC5099
Transistor
162
2SA1907
Transistor
160
2SC5100
Transistor
162
2SA1908
Transistor
160
2SC5101
Transistor
162
2SA1909
Transistor
160
2SC5130
Transistor
162
2SA2151
Transistor
160
2SC5287
Transistor
162
2SA2151A
Transistor
160
2SC6011
Transistor
162
2SA2223
Transistor
160
2SC6011A
Transistor
162
2SB1257
Transistor
160
2SC6145
Transistor
162
2SB1258
Transistor
160
2SD1785
Transistor
164
2SB1259
Transistor
160
2SD1796
Transistor
164
2SB1351
Transistor
160
2SD2014
Transistor
164
2SB1382
Transistor
160
2SD2015
Transistor
164
2SB1383
Transistor
160
2SD2016
Transistor
164
2SB1420
Transistor
160
2SD2017
Transistor
164
2SB1559
Transistor
160
2SD2045
Transistor
164
2SB1560
Transistor
160
2SD2081
Transistor
164
2SB1570
Transistor
160
2SD2082
Transistor
164
2SB1587
Transistor
160
2SD2083
Transistor
164
2SB1588
Transistor
160
2SD2141
Transistor
164
2SB1647
Transistor
160
2SD2389
Transistor
164
2SB1648
Transistor
160
2SD2390
Transistor
164
2SB1649
Transistor
160
2SD2401
Transistor
164
2SC2837
Transistor
162
2SD2438
Transistor
164
2SC2921
Transistor
162
2SD2439
Transistor
164
2SC2922
Transistor
162
2SD2560
Transistor
164
2SC3263
Transistor
162
2SD2561
Transistor
164
2SC3264
Transistor
162
2SD2562
Transistor
164
2SC3284
Transistor
162
2SD2641
Transistor
164
2SC3519
Transistor
162
2SD2642
Transistor
164
2SC3519A
Transistor
162
2SD2643
Transistor
164
2SC3835
Transistor
162
2SK2420
Transistor
MOS FET
168
2SC3851
Transistor
General Purpose
162
2SK2701A
Transistor
MOS FET
168
2SC3851A
Transistor
General Purpose
162
2SK2803
Transistor
MOS FET
168
2SC3852
Transistor
162
2SK2848
Transistor
MOS FET
168
2SC3852A
Transistor
162
2SK2943
Transistor
MOS FET
168
2SC3856
Transistor
162
2SK3003
Transistor
MOS FET
168
2SC3857
Transistor
162
2SK3004
Transistor
MOS FET
168
2SC3858
Transistor
162
2SK3199
Transistor
MOS FET
168
2SC3927
Transistor
162
2SK3710
Transistor
MOS FET
168
236
Part No.
Category
Description
Page
Part No.
Category
Description
Page
2SK3711
Transistor
MOS FET
168
EN01Z
Diode
210
2SK3800
Transistor
MOS FET
168
EP01C
Diode
212
2SK3801
Transistor
MOS FET
168
ES01A
Diode
208
AB01B
Diode
212
ES01F
Diode
209
AG01
Diode
211
ES1
Diode
208
AG01A
Diode
211
ES1F
Diode
209
AK04
Diode
213
ES1Z
Diode
208
AK06
Diode
214
EU01
Diode
208
AK09
Diode
214
EU01Z
Diode
208
AL01
Diode
211
EU02
Diode
208
AL01Z
Diode
210
EU02A
Diode
208
AM01
Diode
207
EU02Z
Diode
208
AM01A
Diode
207
EU1
Diode
208
AM01Z
Diode
207
EU1Z
Diode
208
AP01C
Diode
212
EU2
Diode
208
AS01
Diode
208
EU2A
Diode
208
AS01A
Diode
208
EU2Z
Diode
208
AU01
Diode
208
FGM603
Transistor
IGBT
172
AU01A
Diode
208
FGM622S
Transistor
IGBT
172
AU01Z
Diode
208
FGM623S
Transistor
IGBT
172
AU02
Diode
208
FKG1020
Transistor
MOS FET
168
AU02A
Diode
208
FKH0470
Transistor
MOS FET
168
AU02Z
Diode
208
FKH0660
Transistor
MOS FET
168
BR200
226
FKH1040
Transistor
MOS FET
168
BR201
226
FKP202
Transistor
MOS FET
168
BR202
228
FKP250A
Transistor
MOS FET
168
BR203
228
FKP252
Transistor
MOS FET
168
BR204
226
FKP253
Transistor
MOS FET
168
BR205
230
FKP280A
Transistor
MOS FET
168
BR206
232
FKP300A
Transistor
MOS FET
168
BR300
234
FKP330C
Transistor
MOS FET
168
BR301
234
FKV460S
Transistor
MOS FET
168
EG01
Diode
211
FKV550N
Transistor
MOS FET
168
EG01A
Diode
211
FKV575
Transistor
MOS FET
168
EG01C
Diode
212
FKV660S
Transistor
MOS FET
168
EG1
Diode
211
FM2-2202
Diode
210
EG1A
Diode
211
FMB-2204
Diode
213
EH1
Diode
208
FMB-2304
Diode
213
EK04
Diode
213
FMB-2306
Diode
214
EK06
Diode
214
FMB-24
Diode
213
EK09
Diode
214
FMB-24H
Diode
213
EK14
Diode
213
FMB-24L
Diode
213
EK16
Diode
214
FMB-24M
Diode
213
EK19
Diode
214
FMB-26
Diode
214
EKG1020
Transistor
MOS FET
168
FMB-29
Diode
214
EKH04100
Transistor
MOS FET
168
FMB-29L
Diode
214
EKH06100
Transistor
MOS FET
168
FMB-G14
Diode
213
EKH1070
Transistor
MOS FET
168
FMB-G14L
Diode
213
EKV550
Transistor
MOS FET
168
FMB-G16L
Diode
214
EL02Z
Diode
210
FMB-G19L
Diode
214
EL1
Diode
211
FMB-G24H
Diode
213
EL1Z
Diode
210
FMC-26U
Diode
211
EM01
Diode
207
FMC-26UA
Diode
212
EM01A
Diode
207
FMC-28U
Diode
212
EM01Z
Diode
207
FMC-28UA
Diode
212
EM1
Diode
207
FMC-G28S
Diode
212
EM1A
Diode
207
FMC-G28SL
Diode
212
EM1B
Diode
207
FMD-1056S
Diode
211
EM1C
Diode
207
FMD-1106S
Diode
211
EM1Y
Diode
207
FMD-4204S
Diode
211
EM1Z
Diode
207
FMD-4206S
Diode
211
EM2
Diode
207
FMD-G26S
Diode
211
EM2A
Diode
207
FMEN-210A
Diode
215
EM2B
Diode
207
FMEN-210B
Diode
215
237
Part No.
Category
Description
Page
Part No.
Category
Description
Page
FMEN-215A
Diode
215
FMW-2204
Diode
213
FMEN-2208
Diode
215
FMW-2206
Diode
214
FMEN-2308
Diode
215
FMW-24H
Diode
213
FMEN-220A
Diode
215
FMW-24L
Diode
213
FMEN-220B
Diode
215
FMW-4304
Diode
213
FMEN-230A
Diode
215
FMW-4306
Diode
214
FMEN-230B
Diode
215
FMX-1106S
Diode
211
FMEN-420A
Diode
215
FMX-12S
Diode
210
FMEN-420B
Diode
215
FMX-2203
Diode
210
FMEN-430A
Diode
215
FMX-22S
Diode
210
FMG-14R
Diode
211
FMX-22SL
Diode
210
FMG-14S
Diode
211
FMX-23S
Diode
210
FMG-24R
Diode
211
FMX-4202S
Diode
210
FMG-24S
Diode
211
FMX-4203S
Diode
210
FMG-26R
Diode
211
FMX-4206S
Diode
211
FMG-26S
Diode
211
FMXA-1054S
Diode
211
FMG-G26S
Diode
211
FMXA-1104S
Diode
211
FMG-G2CS
Diode
212
FMXA-1106S
Diode
211
FMJ-2303
Diode
215
FMXA-2102ST
Diode
210
FMJ-23L
Diode
215
FMXA-2153S
Diode
210
FML-12S
Diode
210
FMXA-2202S
Diode
210
FML-13S
Diode
210
FMXA-2203S
Diode
210
FML-14S
Diode
211
FMXA-4202S
Diode
210
FML-22S
Diode
210
FMXA-4203S
Diode
210
FML-23S
Diode
210
FMXA-4204S
Diode
211
FML-24S
Diode
211
FMXA-4206S
Diode
211
FML-4202S
Diode
210
FMX-G12S
Diode
210
FML-4204S
Diode
211
FMX-G14S
Diode
211
FML-G12S
Diode
210
FMX-G16S
Diode
211
FML-G13S
Diode
210
FMX-G22S
Diode
210
FML-G14S
Diode
211
FMX-G26S
Diode
211
FML-G16S
Diode
211
FMXK-1086S
Diode
211
FML-G22S
Diode
210
FMXK-1106S
Diode
211
FMM-22R
Diode
207
FMXK-2206S
Diode
211
FMM-22S
Diode
207
FMXS-2206S
Diode
211
FMM-24R
Diode
207
FMXS-4202S
Diode
210
FMM-24S
Diode
207
FMY-1036S
Diode
208
FMM-26R
Diode
207
FMY-1106S
Diode
208
FMM-26S
Diode
207
FMY-2206S
Diode
208
FMN-1056S
Diode
211
LC5202D
IC
LED Driver IC
136
FMN-1106S
Diode
211
LC5202S
IC
LED Driver IC
136
FMN-1206S
Diode
211
LC5203D
IC
LED Driver IC
136
FMN-2206S
Diode
211
LC5205D
IC
LED Driver IC
136
FMN-3306S
Diode
211
LC5205S
IC
LED Driver IC
136
FMN-4306S
Diode
211
LC5210D
IC
LED Driver IC
136
FMN-G12S
Diode
210
LC5222D
IC
LED Driver IC
138
FMN-G14S
Diode
211
LC5222S
IC
LED Driver IC
138
FMNS-1106S
Diode
211
LC5223D
IC
LED Driver IC
138
FMU-12R
Diode
208
LC5225D
IC
LED Driver IC
138
FMU-12S
Diode
208
LC5225S
IC
LED Driver IC
138
FMU-14R
Diode
208
LC5226D
IC
LED Driver IC
138
FMU-14S
Diode
208
LC5511D
IC
LED Driver IC
142
FMU-16R
Diode
208
LC5513D
IC
LED Driver IC
142
FMU-16S
Diode
208
LC5521D
IC
LED Driver IC
146
FMU-22R
Diode
208
LC5523D
IC
LED Driver IC
146
FMU-22S
Diode
208
LC5523F
IC
LED Driver IC
146
FMU-24R
Diode
208
LC5525F
IC
LED Driver IC
146
FMU-24S
Diode
208
LC5545LD
IC
LED Driver IC
148
FMU-26R
Diode
208
LC5546LD
IC
LED Driver IC
148
FMU-26S
Diode
208
LC5546LF
IC
LED Driver IC
148
FMU-G16S
Diode
208
LC5547LF
IC
LED Driver IC
148
FMU-G26S
Diode
208
LC5548LD
IC
LED Driver IC
148
FMW-2106
Diode
214
LC5549LF
IC
LED Driver IC
148
FMW-2156
Diode
214
LC5555LD
IC
LED Driver IC
140
238
Part No.
Category
Description
Page
Part No.
Category
Description
Page
LC5556LD
IC
LED Driver IC
140
RM4A
Diode
207
LC5565LD
IC
LED Driver IC
144
RM4AM
Diode
207
LC5566LD
IC
LED Driver IC
144
RM4C
Diode
207
LC5720S
IC
LED Driver IC
150
RM4Y
Diode
207
MGD623N
Transistor
IGBT
172
RM4Z
Diode
207
MGD623S
Transistor
IGBT
172
RM10
Diode
207
MKS5015
Transistor
MOS FET
168
RM10A
Diode
207
MKS5020
Transistor
MOS FET
168
RM10B
Diode
207
MPE-220A
Diode
213
RM10Z
Diode
207
MPEN-230AF
Diode
215
RM11A
Diode
207
MPL-102S
Diode
210
RM11B
Diode
207
MPL-1036S
Diode
210
RM11C
Diode
207
MPM01
224
RN1Z
Diode
210
MPM04
224
RN2Z
Diode
210
NR110K
IC
20
RN4A
Diode
211
NR111D
IC
DC/DC Converter IC
54
RN4Z
Diode
210
NR111E
IC
20
RO2
Diode
207
NR117K
IC
20
RO2C
Diode
207
NR119E
IC
20
RO2Z
Diode
207
NR301E
IC
74
RP1H
Diode
212
NR885E
IC
22
RS1A
Diode
208
NR885K
IC
22
RS1B
Diode
209
NR887D
IC
DC/DC Converter IC
46
RS4FS
Diode
209
RA13
Diode
214
RU1
Diode
208
RC2
Diode
209
RU1A
Diode
208
RD2A
Diode
211
RU1B
Diode
209
RF1A
Diode
208
RU1C
Diode
209
RF1B
Diode
209
RU1P
Diode
212
RG1C
Diode
212
RU2
Diode
208
RG2
Diode
211
RU2AM
Diode
208
RG2A
Diode
211
RU2B
Diode
209
RG4C
Diode
212
RU2C
Diode
209
RG10
Diode
211
RU2M
Diode
208
RG10A
Diode
211
RU2Z
Diode
208
RH1A
Diode
208
RU20A
Diode
208
RH1B
Diode
209
RU3
Diode
208
RH1C
Diode
209
RU3A
Diode
208
RH1Z
Diode
208
RU3AM
Diode
208
RJ43
Diode
215
RU3B
Diode
209
RK14
Diode
213
RU3C
Diode
209
RK16
Diode
214
RU3M
Diode
208
RK19
Diode
214
RU4
Diode
208
RK34
Diode
213
RU4A
Diode
208
RK36
Diode
214
RU4B
Diode
209
RK39
Diode
214
RU4C
Diode
209
RK44
Diode
213
RU4D
Diode
209
RK46
Diode
214
RU4DS
Diode
209
RK49
Diode
214
RU4M
Diode
208
RL2
Diode
211
RU4Z
Diode
208
RL2Z
Diode
210
RW54
Diode
213
RL4A
Diode
211
RX10Z
Diode
210
RL4Z
Diode
210
RY2A
Diode
208
RL10Z
Diode
210
SAI01
IC
12
RM1
Diode
207
SAI02
IC
12
RM1A
Diode
207
SAI03
IC
12
RM1B
Diode
207
SCM1241M
IC
130
RM1C
Diode
207
SCM1243MF
IC
130
RM1Z
Diode
207
SCM1245MF
IC
130
RM2
Diode
207
SCM1246MF
IC
130
RM2A
Diode
207
SCM1248M
IC
130
RM2B
Diode
207
SI-3010KD
IC
80
RM2C
Diode
207
SI-3010KF
IC
Linear Regulator IC
88
RM2Z
Diode
207
SI-3010LLSL
IC
84
RM4
Diode
207
SI-3011ZD
IC
86
239
Part No.
Category
Description
Page
Part No.
Category
Description
Page
SI-3011ZF
IC
Linear Regulator IC
90
SJPB-H4
Diode
213
SI-3012KD
IC
80
SJPB-H6
Diode
213
SI-3012KS
IC
78
SJPB-H9
Diode
213
SI-3012LU
IC
72
SJPB-L4
Diode
213
SI-3018LSA
IC
76
SJPB-L6
Diode
213
SI-3025KS
IC
78
SJPD-D5
Diode
210
SI-3025LSA
IC
76
SJPD-L5
Diode
210
SI-3033KD
IC
80
SJPE-H3
Diode
215
SI-3033KS
IC
78
SJPE-H4
Diode
215
SI-3033LSA
IC
76
SJPJ-D3
Diode
215
SI-3033ZD
IC
86
SJPJ-H3
Diode
215
SI-3050KD
IC
80
SJPJ-L3
Diode
215
SI-3050LSA
IC
76
SJPL-D2
Diode
210
SI-6633C
IC
118
SJPL-F4
Diode
210
SI-6633M
IC
116
SJPL-H2
Diode
210
SI-7321M
IC
106
SJPL-H6
Diode
210
SI-7510
IC
110
SJPL-L2
Diode
210
SI-8001FDE
IC
34
SJPL-L4
Diode
210
SI-8001FDL
IC
34
SJPM-H4
Diode
207
SI-8001FFE
IC
DC/DC Converter IC
52
SJPW-F6
Diode
213
SI-8005Q
IC
32
SJPW-T4
Diode
213
SI-8008HD
IC
36
SJPX-F2
Diode
210
SI-8008HFE
IC
DC/DC Converter IC
56
SJPX-H3
Diode
210
SI-8008TFE
IC
DC/DC Converter IC
42
SJPX-H6
Diode
210
SI-8008TM
IC
18
SJPZ-E20
Diode
216
SI-8010GL
IC
DC/DC Converter IC
44
SJPZ-E33
Diode
216
SI-8010Y
IC
DC/DC Converter IC
58
SJPZ-K28
Diode
216
SI-8015JF
IC
DC/DC Converter IC
40
SJPZ-N18
Diode
216
SI-8033JD
IC
16
SJPZ-N27
Diode
216
SI-8033JF
IC
DC/DC Converter IC
40
SJPZ-N33
Diode
216
SI-8033S
IC
DC/DC Converter IC
48
SJPZ-N40
Diode
216
SI-8033SD
IC
26
SKH04100
Transistor
MOS FET
168
SI-8033W
IC
14
SKH06100
Transistor
MOS FET
168
SI-8050E
IC
DC/DC Converter IC
38
SKH1070
Transistor
MOS FET
168
SI-8050HFE
IC
DC/DC Converter IC
56
SKP202
Transistor
MOS FET
168
SI-8050JD
IC
16
SKP253
Transistor
MOS FET
168
SI-8050JF
IC
DC/DC Converter IC
40
SLA4030
Thyristor
174
SI-8050S
IC
DC/DC Converter IC
48
SLA4031
Thyristor
174
SI-8050SD
IC
26
SLA4036
Thyristor
174
SI-8050TFE
IC
DC/DC Converter IC
42
SLA4041
Thyristor
174
SI-8050W
IC
14
SLA4051
Thyristor
174
SI-8050Y
IC
DC/DC Converter IC
58
SLA4052
Thyristor
174
SI-8090JD
IC
16
SLA4060
Thyristor
174
SI-8090S
IC
DC/DC Converter IC
48
SLA4061
Thyristor
174
SI-8105QL
IC
DC/DC Converter IC
50
SLA4070
Thyristor
174
SI-8120JD
IC
16
SLA4071
Thyristor
174
SI-8120JF
IC
DC/DC Converter IC
40
SLA4390
Thyristor
174
SI-8120S
IC
DC/DC Converter IC
48
SLA5037
Thyristor
174
SI-8150S
IC
DC/DC Converter IC
48
SLA5041
Thyristor
174
SI-8205NHD
IC
24
SLA5059
Thyristor
174
SI-8205NHG
IC
24
SLA5060
Thyristor
174
SI-8401L
IC
60
SLA5061
Thyristor
174
SI-8501L
IC
60
SLA5064
Thyristor
174
SI-8511NVS
IC
68
SLA5065
Thyristor
174
SIM6811M
IC
128
SLA5068
Thyristor
174
SIM6812M
IC
128
SLA5073
Thyristor
174
SIM6822M
IC
128
SLA5074
Thyristor
174
SIM6827M
IC
128
SLA5075
Thyristor
174
SJPA-D3
Diode
214
SLA5085
Thyristor
174
SJPA-H3
Diode
214
SLA5086
Thyristor
174
SJPA-L3
Diode
214
SLA5096
Thyristor
174
SJPB-D4
Diode
213
SLA5201
Thyristor
174
SJPB-D6
Diode
213
SLA5212
Thyristor
174
SJPB-D9
Diode
213
SLA5222
Thyristor
174
240
Part No.
Category
Description
Page
Part No.
Category
Description
Page
SLA5227
Thyristor
174
SMA6823MH
IC
122
SLA6012
Thyristor
174
SMA6862MZ
IC
124
SLA6020
Thyristor
174
SMA6863MZ
IC
124
SLA6022
Thyristor
174
SMA6865MZ
IC
124
SLA6023
Thyristor
174
SMA7022MU
IC
SLA6024
Thyristor
174
SMA7029M
IC
SLA6026
Thyristor
174
SPI-6631M
IC
SLA6868MZ
IC
126
SPI-8001TW
IC
64
SLA6870MZ
IC
126
SPI-8002TW
IC
64
SLA7022MU
IC
96
SPI-8003TW
IC
64
SLA7024M
IC
98
SPI-8010A
IC
28
SLA7026M
IC
98
SSC2001S
IC
PFC IC
SLA7027MU
IC
98
SSC2101S
IC
PFC IC
SLA7029M
IC
96
SSC2102S
IC
PFC IC
SLA7070MPR
IC
100
SSC9512
IC
AC/DC Converter IC
SLA7070MPRT
IC
100
SSC9522S
IC
AC/DC Converter IC
SLA7070MR
IC
100
STA301A
Transistor
175
SLA7071MPR
IC
100
STA302A
Transistor
175
SLA7071MPRT
IC
100
STA303A
Transistor
175
SLA7071MR
IC
100
STA322A
Transistor
175
SLA7072MPR
IC
100
STA401A
Transistor
175
SLA7072MPRT
IC
100
STA402A
Transistor
175
SLA7072MR
IC
100
STA403A
Transistor
175
SLA7073MPR
IC
100
STA404A
Transistor
175
SLA7073MPRT
IC
100
STA406A
Transistor
175
SLA7073MR
IC
100
STA408A
Transistor
175
SLA7075MPR
IC
108
STA412A
Transistor
175
SLA7075MPRT
IC
108
STA413A
Transistor
175
SLA7075MR
IC
108
STA421A
Transistor
175
SLA7076MPR
IC
108
STA431A
Transistor
175
SLA7076MPRT
IC
108
STA434A
Transistor
175
SLA7076MR
IC
108
STA457C
Transistor
175
SLA7077MPR
IC
108
STA460C
Transistor
175
SLA7077MPRT
IC
108
STA471A
Transistor
175
SLA7077MR
IC
108
STA472A
Transistor
175
SLA7078MPR
IC
108
STA473A
Transistor
175
SLA7078MPRT
IC
108
STA475A
Transistor
175
SLA7078MR
IC
108
STA481A
Transistor
175
SLA7080MPR
IC
102
STA485A
Transistor
175
SLA7081MPR
IC
102
STA6940M
IC
112
SLA7082MPR
IC
102
STA7130MPR
IC
104
SLA7083MPR
IC
102
STA7131MPR
IC
104
SMA4020
Transistor
175
STA7132MPR
IC
104
SMA4021
Transistor
175
STA801M
IC
SMA4030
Transistor
175
STD01N
Transistor
Audio (Darlington)
164
SMA4032
Transistor
175
STD01P
Transistor
Audio (Darlington)
164
SMA4033
Transistor
175
STD03N
Transistor
Audio (Darlington)
164
SMA4036
Transistor
175
STD03P
Transistor
Audio (Darlington)
164
SMA4038
Transistor
175
STR2W152D
IC
AC/DC Converter IC
SMA5106
Transistor
175
STR2W153D
IC
AC/DC Converter IC
SMA5112
Transistor
175
STR3A151
IC
AC/DC Converter IC
SMA5117
Transistor
175
STR3A151D
IC
AC/DC Converter IC
SMA5118
Transistor
175
STR3A152
IC
AC/DC Converter IC
SMA5125
Transistor
175
STR3A152D
IC
AC/DC Converter IC
SMA5127
Transistor
175
STR3A153
IC
AC/DC Converter IC
SMA5130
Transistor
175
STR3A153D
IC
AC/DC Converter IC
SMA5131
Transistor
175
STR3A154
IC
AC/DC Converter IC
SMA5132
Transistor
175
STR3A154D
IC
AC/DC Converter IC
SMA5133
Transistor
175
STR3A155
IC
AC/DC Converter IC
SMA6010
Transistor
175
STR3A155D
IC
AC/DC Converter IC
SMA6080
Transistor
175
STR3A161HD
IC
AC/DC Converter IC
SMA6511
Transistor
175
STR3A162HD
IC
AC/DC Converter IC
SMA6821MH
IC
122
STR3A163HD
IC
AC/DC Converter IC
SMA6822MH
IC
122
STR-A6051M
IC
AC/DC Converter IC
96
96
114
62
241
Part No.
Category
Description
Page
Part No.
Category
Description
Page
STR-A6052M
IC
AC/DC Converter IC
STR-Y6763
IC
AC/DC Converter IC
STR-A6053M
IC
AC/DC Converter IC
STR-Y6765
IC
AC/DC Converter IC
STR-A6059H
IC
AC/DC Converter IC
STR-Y6766
IC
AC/DC Converter IC
STR-A6061H
IC
AC/DC Converter IC
SV-3SS
Diode
217
STR-A6061HD
IC
AC/DC Converter IC
SV-4SS
Diode
217
STR-A6062H
IC
AC/DC Converter IC
SX68001MH
IC
120
STR-A6062HD
IC
AC/DC Converter IC
SX68002MH
IC
120
STR-A6063HD
IC
AC/DC Converter IC
SX68003MH
IC
120
STR-A6069H
IC
AC/DC Converter IC
SZ-10N27
Diode
216
STR-A6069HD
IC
AC/DC Converter IC
SZ-10N40
Diode
216
STR-A6079M
IC
AC/DC Converter IC
SZ-10NN27
Diode
216
STR-A6131
IC
AC/DC Converter IC
SZ-10NN40
Diode
216
STR-A6131M
IC
AC/DC Converter IC
TF541S-A
Thyristor
Thyristor
194
STR-A6132
IC
AC/DC Converter IC
TF561S-A
Thyristor
Thyristor
194
STR-A6151
IC
AC/DC Converter IC
TFA37S
Thyristor
Thyristor
194
STR-A6151M
IC
AC/DC Converter IC
TFA38S
Thyristor
Thyristor
194
STR-A6153E
IC
AC/DC Converter IC
TFA57S
Thyristor
Thyristor
194
STR-A6159
IC
AC/DC Converter IC
TFA58S
Thyristor
Thyristor
194
STR-A6159M
IC
AC/DC Converter IC
TFA87S
Thyristor
Thyristor
194
STR-A6169
IC
AC/DC Converter IC
TFA88S
Thyristor
Thyristor
194
STR-L451
IC
AC/DC Converter IC
TFA107S
Thyristor
Thyristor
194
STR-L472
IC
AC/DC Converter IC
TFA108S
Thyristor
Thyristor
194
STR-L6472
IC
AC/DC Converter IC
TFC563D
Thyristor
194
STR-V152
IC
AC/DC Converter IC
TMA34S-L
Thyristor
Triac
196
STR-V153
IC
AC/DC Converter IC
TMA36G-L
Thyristor
Triac
196
STR-V653
IC
AC/DC Converter IC
TMA36H-L
Thyristor
Triac
196
STR-W6051S
IC
AC/DC Converter IC
TMA36S-L
Thyristor
Triac
196
STR-W6052S
IC
AC/DC Converter IC
TMA54S-L
Thyristor
Triac
196
STR-W6053S
IC
AC/DC Converter IC
TMA56G-L
Thyristor
Triac
196
STR-W6251D
IC
AC/DC Converter IC
TMA56H-L
Thyristor
Triac
196
STR-W6252D
IC
AC/DC Converter IC
TMA56S-L
Thyristor
Triac
196
STR-W6253D
IC
AC/DC Converter IC
TMA84S-L
Thyristor
Triac
196
STR-W6723N
IC
AC/DC Converter IC
TMA86G-L
Thyristor
Triac
196
STR-W6734
IC
AC/DC Converter IC
TMA86H-L
Thyristor
Triac
196
STR-W6735
IC
AC/DC Converter IC
TMA86S-L
Thyristor
Triac
196
STR-W6735N
IC
AC/DC Converter IC
TMA104S-L
Thyristor
Triac
196
STR-W6750F
IC
AC/DC Converter IC
TMA106G-L
Thyristor
Triac
196
STR-W6753
IC
AC/DC Converter IC
TMA106H-L
Thyristor
Triac
196
STR-W6754
IC
AC/DC Converter IC
TMA106S-L
Thyristor
Triac
196
STR-W6756
IC
AC/DC Converter IC
TMA124S-L
Thyristor
Triac
196
STR-W6756N
IC
AC/DC Converter IC
TMA126G-L
Thyristor
Triac
196
STR-W6765
IC
AC/DC Converter IC
TMA126H-L
Thyristor
Triac
196
STR-W6765N
IC
AC/DC Converter IC
TMA126S-L
Thyristor
Triac
196
STR-X6729
IC
AC/DC Converter IC
TMA164B-L
Thyristor
Triac
196
STR-X6737
IC
AC/DC Converter IC
TMA164P-L
Thyristor
Triac
196
STR-X6737M
IC
AC/DC Converter IC
TMA164S-L
Thyristor
Triac
196
STR-X6750B
IC
AC/DC Converter IC
TMA166B-L
Thyristor
Triac
196
STR-X6750F
IC
AC/DC Converter IC
TMA166G-L
Thyristor
Triac
196
STR-X6756
IC
AC/DC Converter IC
TMA166H-L
Thyristor
Triac
196
STR-X6757
IC
AC/DC Converter IC
TMA166P-L
Thyristor
Triac
196
STR-X6757N
IC
AC/DC Converter IC
TMA166S-L
Thyristor
Triac
196
STR-X6759B
IC
AC/DC Converter IC
TMA204S-L
Thyristor
Triac
196
STR-X6759F
IC
AC/DC Converter IC
TMA206S-L
Thyristor
Triac
196
STR-X6759N
IC
AC/DC Converter IC
TMA254B-L
Thyristor
Triac
196
STR-X6768N
IC
AC/DC Converter IC
TMA256B-L
Thyristor
Triac
196
STR-X6769
IC
AC/DC Converter IC
TMB166S-L
Thyristor
Triac
196
STR-X6769B
IC
AC/DC Converter IC
TMB206S-L
Thyristor
Triac
196
STR-Y6453
IC
AC/DC Converter IC
VR-60SS
Diode
217
STR-Y6456
IC
AC/DC Converter IC
VR-61SS
Diode
217
STR-Y6473
IC
AC/DC Converter IC
STR-Y6476
IC
AC/DC Converter IC
STR-Y6735
IC
AC/DC Converter IC
STR-Y6753
IC
AC/DC Converter IC
STR-Y6754
IC
AC/DC Converter IC
242