Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Weldlok 15
Weldable Clip
SPECIFICATIONS
SPECIFICATIONS
Resistance to lateral force R max.
Bolt torque
torque
Bolt
Lateral adjustment,
adjustment, total
total
Lateral
N available
available nose
noses
N
W eight
Weight
15 kips
150 ft-lbs
ft-lbs
150
1/2
1/2
1/2, 11/16
11/16
1/2,
2.1 lbs
lbs
2.1
NOTES
See Selection Table for F Dimensions.
See General Specifications Weldlok Series for additional clip
information.
-1-
COMPONENTS
COMPONENTS
WELDLOK 15
1 upper component No. 9116\12\36 or
or
1 cast
upper component
No. 9116\12\31\Z
No. 9116\--\22
o1
r component
and 1 fgr.
lower
component
No.5/8"
9116\--\22
5 hex
capscrew,
Dia. X (forged)
"
gr. 5 hex
5/8" Dia. X 1 3/4"
hexcapscrew,
nut, 5/8" Dia.
1 A325
A325 hex nut,
5/8" 5/8"
Dia. Dia.
1 hardened
washer,
1 hardened washer, 5/8" Dia.
AT SPLICE BAR
AT
SPLICE
CLIP
PART BAR
NO.
CLIP PART NO.
WELDLOK 15C
(4 per joint)
NOTES
1) The Weldlok 15 is supplied with either a forged steel or cast iron upper component and vulcanizebonded rubber nose. For clips with cast uppers, add a "Z" suffix to the end of the clip part number.
2) To order clips without rubber noses consult GANTREX for proper selection.
3) GANTREX clips are available to suit most rail sections. Please consult GANTREX for details if
the rail you are using does not appear in the above table.
4) GANTREX recommends that rail joints be welded wherever possible.
5) Ask GANTREX for information on low profile clips for DIN rail sections and/or side rollers.
6) Contact GANTREX for available protective coatings.
MATERIALS
Upper Component . . . . . . . . . . Forged Steel or Ductile Cast Iron
Lower Component . . . . . . . . . . Weldable Forged Steel
Pressure Block (Nose) . . . . . . Synthetic Rubber
INSTALLATION
The lower component is welded to the support parallel to the axis of the rail and the upper
component is fastened to it by means of one 5/8" diameter Grade 5 hex capscrew. For full
instructions, refer to GANTREX "Suggested Weld and Installation Instructions Weldlok 15,18,24".
Do not use cleaning fluids or protective coatings which contain ketones or similar chemicals, as they
may seriously damage the rubber nose. Do not paint rail clips without first consulting GANTREX.
For complete crane runway installation services, including rail welding, please contact:
Gantrex Crane Rail Installations, Inc. at 1-800-242-6873.
GANTREX reserves the right to discontinue or change specifications at any time without prior notice and without incurring any obligation whatsoever.
TOLL
TOLLFREE:
FREE: 800
80022GANTREX
GANTREX (800)
(800)242-6873
242-6873
Quality on Track
GANTREX, 2008
GANTREX,
2003
PRINTED
in U.S.A.
PRINTED IN U.S.A.
Rev. 6/14
Rev. 05/03