Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Series LVP
PRODUCT INFORMATION
Design
General
HERMETIC Pumps is producing and successfully selling vacuum pumps and compressors in the whole
world for decades. Mode of operation, design and application have been constantly optimised and
adapted to the user industries requirements. The pumps are available in conventional sealed and
hermetically sealed execution. Magnetic coupled or canned motor execution guarantees operation
without leakage and minimal maintenance. The compact design enables simple, fast and economical
maintenance.
Function
The vacuum pumps and compressors are rotary positive displacement pumps, which cover a wide range
of application. The applications are in chemical, petrochemical, pharmaceutical, paint industries as well
as general manufacturing.
The working space of the liquid ring vacuum pump or compressor is partially filled with liquid in
operation. Casing and port plates form the working space, where the eccentrically mounted rotating
impeller forms a liquid ring. The liquid ring forms cells between the impeller blades, which expand
during rotation, and thus suck the gas through the suction port. As the impeller rotates further, these
cells are getting smaller and consequently compressing the gas through the discharge port. Together
with the gas, a part of the ring liquid will be expelled through the discharge port, which is separated
from the gas in the separator.
Page 2 of 9
PRODUCT INFORMATION
Application
Capacity range
Suction capacity is depending on rotational speed. Pump capacities up to 1800 m/h are available.
Temperature
Depending on the applied ring liquid and material of construction, maximum ring liquid operating
temperatures of 100 C are possible. Special executions for higher temperatures are available on
request.
Pressure range
Depending on execution, liquid ring vacuum pumps are available for suction pressures down to approx.
30 mbar (abs) and discharge pressures up to 2500 mbar (abs).
Connections
Nominal size is related to pump size. The range is for DN 40 to DN 100. Special executions, i.e.
dimensions according to ANSI are available on request.
Environmental safety
Liquid ring vacuum pumps and compressors are suitable for use in hazardous gases. Certifications for
mechanical explosion protection according to European standard 94/9/EC (ATEX) II 2 G c T4 T6 are
available. Certification for Category 1 is also available. The pump seals are also certified by TV to
comply with TA-Luft.
Page 3 of 9
PRODUCT INFORMATION
Impeller designs:
single ended
double ended
Quality
HERMETIC liquid ring vacuum pumps and compressors are state of the art and quality is compliant to
design standards i.e. ISO, VDMA, DIN and European standards.
Our quality manual according to ISO 9001 supports the manufacturing process.
Page 4 of 9
PRODUCT INFORMATION
Pump designation
L
D for compressor
Size
(50, 125, 250, 320, 450, 600, 800, 1200, 1800)
Style / Shaft sealing
S Short size (close coupled), L Long (bearing bracket)
G Mechanical seal, M Magnetic coupling,
H Canned motor
HERMETIC Vacuum Pump
Page 5 of 9
PRODUCT INFORMATION
Materials of construction
Parts
End shield
Port plate
Casing
Impeller
Shaft
Bearing bracket
Mechanical seal
Magnetic coupling
Gaskets
O-rings
Slide bearings
Stainless steel
CrNiSt 1.4408
CrNiSt 1.4571
CrNiSt 1.4408
CrNiSt 1.4408
CrNiSt 1.4571 / 1.4462
GGG 40
CrNiSt / Carbon / Viton
CrNiSt / Hastelloy
AFM 34
FEP / Viton
SIC, CD6N / SIC30
Hastelloy
Hastelloy C22
Hastelloy C22
Hastelloy C22
Hastelloy C22
Hastelloy C22
GGG 40
acc. to specification
Hastelloy
acc. to specification
acc. to specification
SIC, CD6N / SIC30
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
GGG 40
acc. to specification
Titanium
acc. to specification
acc. to specification
SIC, CD6N / SIC30
Capacity range
(Standard)
Suction capacity
Discharge pressure
Temperature
Pressure rating
Test pressure
[m/h]:
[mbar (abs)]:
[C]:
[PN]:
[bar]:
up to 1800
up to 2500
-20 to +100
10
16
Special design and operating conditions allow higher temperatures and pressures (consult factory).
Page 6 of 9
PRODUCT INFORMATION
Sizes
Mechanical seal
execution
Magnetic-coupled
execution
Canned motor
execution
LVPH
LVPS
LVPL
LVPG
LVPM
125
150
250
125
150
250
320
450
600
800
1200
1800
50
125
150
250
320
450
600
800
1200
1800
50
125
150
250
320
450
600
800
1200
1800
Drawings
LVPG
HERMETIC Vacuum pump with single
mechanical seal, external roller bearings and
double ended impeller.
Page 7 of 9
PRODUCT INFORMATION
LVPS
HERMETIC Vacuum pump in short size design,
with single mechanical seal and single ended
impeller with seat on motor shaft.
LVPL
HERMETIC Vacuum pump in bearing bracket
design (long size), with single mechanical seal
and single ended impeller.
LVPM
HERMETIC Vacuum pump with magnetic
coupling, product lubricated slide bearings and
double ended impeller.
Page 8 of 9
PRODUCT INFORMATION
LVPM
HERMETIC Vacuum pump in modular
construction with magnetic coupling, product
lubricated slide bearings and single ended
impeller.
LVPM
HERMETIC Vacuum pump in bearing bracket
design with magnetic coupling, product
lubricated slide bearings and single ended
impeller.
LVPH
HERMETIC Vacuum pump with canned motor
and product lubricated slide bearings.
Page 9 of 9
LVP/07/07/E