Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The NVidia helper service may re-add these to the registry, I'm not sure. The
nvcpl.dll file may be causing this as well.
Source: http://www.geocities.com/fatboyberzerk/nvidia/index.html
-------------+ MORE:
Clicking on a video file
makes monitor go black
Luis ORTEGA
2004-11-16, 2:32 pm
The only software that has been installed in a while is the latest Avid
Xpress Pro 4.6 upgrade.
While trying to check on this problem, I noticed that device manager
reported a default monitor and when I tried to reinstall the inf files for
the monitor, windows failed to start after I restarted. I tried twice and
windows would go black after the xp logo screen after the bios screens. I
had to use last known good configuration to get back into windows.
I reinstalled the latest drivers for the video card and the monitor inf file
and it then worked ok. But all this happened after the original problems and
did not make any difference to the problem.
It's still going on. It happens all the time, whether I've been running
programs or right after a fresh start.
I have an MSI 128 mb Nvidia GeForce FX5700 ultra video card and an
Iiyama
Vision Master Pro 400 17" monitor set at 1024x768 at 32 bit colour and 85
refresh rate and am not using normal default settings in the options of the
video card. Windows Xp SP1 is installed with a P4 3 ghz cpu and 2 gig
ram.
There is Direct X 9c, Media Player 9, and quicktime 6.5 installed on the
system with the rest of the editing software.
Can anyone please offer some advice on what may be going on here?
Thanks a lot for any advice.
Michael C
2004-11-16, 2:32 pm
Mac Cool
Luis ORTEGA:
2004-11-16, 2:32 pm
> Whenever I right click on a video file (avi, mov, wmv, mpeg) on
one
> of my hard drives to play it, the monitor screen goes black for a
> second and then comes back on.
"I was also experiencing these annoying sync-problems. The cause
for
this lies in nvcpl.dll - a nvidia dll, which scans for connected TVs.
The first time the dll is loaded, is at windows-bootup
(HKEY_LOCAL_MACHINE->SOFTWARE->Microsoft->Windows>CurrentVersion->Run).
This causes the first flicker and unfortunately the auto-startupentry
can't be deleted.
The flicker when right-clicking on video-files is caused by a shellextension, which the nvidia-driver installs for all types of videofiles. This shell-extension calls nvcpl.dll everytime you right click a
video file to scan for connected TVs. If a TV is present, the shell
extension shows up in the context-menu as "Play on My TV". I
never
tested this, but I suppose when you click it, the video is directly
shown on your connected TV.
This could have been implemented a lot better, this f...ing syncflicker
is driving you crazy when browsing a video archive.
After scanning the registry, I found the key responsible for the
shell
extension. Just search for "PlayOnMyTV" in the registry and you
will
find some entries under "shellex" (shell extension). These entries
contain an identifier, {FFB699E0-306A-11d3-8BD100104B6F7516} in my
case, I'm not sure if this identifier is static or created dynamically,
so in your registry, it might be another number. Now copy the
identifier
and search for it in the registry; delete every occurence when it's
connected to video-file formats (.avi, .mpg, .mpeg and so on) and
afterwards the "PlayOnMyTV"-shellextensions."
From http://www.techimo.com/forum/t117062.html
-Mac Cool
Spajky
2004-11-16, 2:32 pm
@="E:\\WIN98\\SYSTEM\\nvcpl.dll"
"ThreadingModel"="Apartment"
and
[HKEY_LOCAL_MACHINE\Software\CLASSES\CLSID\{67E0E3C03068-11D3-8BD1-00104B6F
7516}]
@="NVIDIA CPL EXTENSION"
[HKEY_LOCAL_MACHINE\Software\CLASSES\CLSID\{67E0E3C03068-11D3-8BD1-00104B6F
7516}\InProcServer32]
@="E:\\WIN98\\SYSTEM\\nvcpl.dll"
"ThreadingModel"="Apartment"
>Dunno if this helps the diagnostic.
-Regards, SPAJKY
& visit my site @ http://www.spajky.vze.com
"Tualatin OC-ed / BX-Slot1 / inaudible setup!"
E-mail AntiSpam: remove ##
Camdyn
2004-11-16, 2:32 pm
Luis ORTEGA
2004-11-16, 2:32 pm
Mac Cool
Luis ORTEGA:
2004-11-17, 11:45 pm
> Why do you think that the barebones editing computer monitor
would be
> playing up when I right click on a video file while this other
> computer is rock solid?
I don't know. Each time I have had the problem it just started
happening.
It didn't seem to coincide with a new driver any other change, it
just
seemed to start out of the blue.
> Could the problem perhaps be in any way connected to a fault in
the
> monitor itself or something else like a cable?
That was my original thought, but changing monitors or cards
doesn't solve
the problem.
Glad to hear it worked for you.
-Mac Cool