Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
An anhydride cured epoxy system that was developed and tested for cryogenic applications down to
liquid helium temperatures (-269oC/-452oF) as well as for its resistance to high energy radiation.
Sets the performance standards in cryogenic and high radiation applications and is backed by
performance data that meet all applicable test specifications.
Good room temperature performance and handling characteristics: low viscosity and long pot-life.
Non-carcinogenic resin system with very low toxicity. It is a non-solvent based system, and will not
give off volatiles on cure.
Improved wetting and excellent impregnation of large coils with highly tortuous paths.
Cure:
Material Advantages
Non-Carcinogenic
Low Toxicity
Long Pot-Life, 60 hours at 40 C
Low Viscosity, 400 cP at 40 C
Excellent adhesion to fibers and fillers
Specific Gravity 1.03 g/cc
Processing Temperature 40 - 60 C
Material Properties
Viscosity @
Glass
Linear
Dielectric Strength with S-2 Glass,
60o C
Transition
Shrinkage*
0.5 mm thick,
[cP]
Temp [oC]
[%]
at 76 K [KV/mm]
<100
113o
<1
76.3
*Neat resin linear cure shrinkage, cured 1.5 hrs at 135 C. Cure schedule will effect linear shrinkage.
CTD-101K, with 50% Vf satin weave S-2 Glass, Through Thickness: Unirradiated
Compressive Properties
Temperature
[K]
295
76
4
Compression Strength
[MPa]
790
1300
1360
Compression Modulus
[GPa]
12.9
16.7
19.7
WWW.CTD-MATERIALS.COM
Shear Properties
Temperature
[K]
76
4
Shear Strength
[MPa]
108.0
120.0
Flexural Modulus
[GPa]
27.9
34.1
Fixture
[deg.]
15
45
75
84
15
45
75
84
Shear Strength
[MPa]
101.5
175.8
247.5
127.1
104.1
178.3
277.2
125.0
Compressive Strength
[MPa]
29.6
175.8
933.2
1207.7
27.9
178.3
1034.3
1197.3
Irradiation Results
Irradiation
Temp
[K]
Dose
[Rads]
4
4
4
330
330
330
330
4.7E9
8.8E9
1.6E10
4.7E8
4.7E9
2.3E10
Compressive
Strength
at 76K
[GPa]
1.23
1.20
1.08
1.30
-
Compressive
Modulus
at 76K
[GPa]
19.5
13.0
13.5
16.7
-
Shear
Strength
at 76K
[MPa]
85.0
41.3
6.7
108.0
-
Flexural
Modulus
at 76K
[GPa]
27.5
20.6
15.6
27.9
-
Fracture
Resistance G1C
at 76K
[KN/m]
0.36
0.28
0.15
0.16
Coefficient of Thermal Expansion of CTD-101K, with 50% Vf satin weave S-2TM Glass
CTE
0.00
30.00
-0.10
% TE
-0.20
% TE Warp or
Fill
% TE Through
Thickness
CTE Warp or Fill
-0.30
-0.40
CTE Through
Thickness
-0.50
20.00
15.00
10.00
CTE (m/m-K)
25.00
5.00
-0.60
-0.70
0
50
100
150
200
Temp (K)
250
300
0.00
350
WWW.CTD-MATERIALS.COM
500.00
Viscosity [cP]
400.00
300.00
200.00
100.00
0.00
0.0
5.0
10.0
15.0
20.0
25.0
30.0
time [hr]
Disclaimer: The information and recommendations contained herein are based upon data believed to be accurate.
However, no guarantee or warranty of any kind expressed or implied is made with respect to the information
contained herein.
April 03
WWW.CTD-MATERIALS.COM