Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Customer:
Engineer:
Pump Manufacturer:
Contents:
Data Sheets
Dimensional Data
Wiring Schematics
Field Connections
Note: The drawings included in this package are for controllers covered under our standard offering.
Actual AS BUILT drawings may differ from what is shown in this package.
August 2016
Technical Data
GPD Diesel Fire Pump Controller
Built to NFPA 20 (latest edition)
Standard,
Listings,
Approvals and
Certifications
FM Global
Class 1321/1323
Accepted for use in the City of New York by the Department of Buildings
Seismic Certification
Optional
CE Mark
Enclosure
Protection Rating
Standard: NEMA 2 (IP31)
Optional
NEMA 12
NEMA 3
NEMA 3R
NEMA 4
Accessories
Bottom entry gland plate
Lifting Lugs
Keylock handle
Ambient
Temperature
Rating
Paint Specifications
Red RAL3002
Powder coating
Glossy textured finish
Standard
5C to 40C / 41F to 104F
Optional
5C to 55C / 41F to 131F
AC
General
IP54
IP55
IP65
IP66
DC
Grounding system
Battery chargers
Pressure and
Event Recorder
August 2016
Technical Data
GPD Diesel Fire Pump Controller
Pressure sensing
Audible Alarm
Remote Alarm
Contacts
Pressure transducer and run test solenoid valve assembly for fresh water application
Pressure sensing connection 1/2 Female NPT
Drain connection 3/8
Rated and calibrated for 0-500psi working pressure
Externally mounted with protective cover
4 alarm bell - 85 dB at 10ft. (3m)
Visual only
Periodic test
Engine run
Main switch in HAND
Main switch AUTO
High raw water temperature
ECM warning
Pump room temperature (oF or oC)
Visual and Audible
Battery #1 & battery #2 failure
Overspeed
Charger #1 & Charger #2 failure
Low oil pressure
AC power available
High engine temperature
Low pump room temperature
Fail to start
System overpressure
High fuel level
PLD low suction pressure
ECM fault
ECM Selector switch in alternate position
Cranking Cycle
Main switch in OFF
Low raw water flow
DPDT-8A-250V.AC
Engine run
Common controller trouble
Charger #1 & Charger #2 failure
Pressure line failure
Common engine trouble
Battery #1 & battery #2 failure
Overspeed
High engine temperature
DC failure
Fail when running
Fail to start
Fuel injection malfunction** Loss of continuity (starter) #1 and/or #2 Low oil pressure
ECM selector switch in alternate position***
Common pump room alarm (field re-assignable)*
Low suction pressure
Water reservoir low
Low fuel level
Low pump room temperature
Water reservoir empty
High fuel level
High pump room temperature
AC Failure
Fuel tank leak
H-O-A selector switch in OFF or HAND
Free (field programmable)*
Terminals for
Field Connections
for External
Devices
ViZiTouch
Operator Interface
*Except if option C13 is ordered. Tornatech reserves the right to use any of these four alarm points for special specific application requirements
**Applicable to electronic engines only.
*** Applicable to electronic engines only. Alarms when ECM selector switch on the engine is in alternate mode.
August 2016
Technical Data
GPD Diesel Fire Pump Controller
Operation
Selector Switch
Hand-Off-Auto
Behind lockable and breakable cover
Automatic Start
Manual Start
Crank Cycle
Stopping
Timers
Actuation
Visual Indication
Mode
Communication
Protocol
Capability
Alarm and
shutdown
schedule
12V.DC
24V.DC
Pressure
Non-pressure
Automatic
Non-automatic
Protocol: Modbus
Connection type: Shielded female connector RJ45
Frame Format: TCP/IP
Addresses: See bulletin MOD-GPD
Automatic Start
High Coolant
Alarm only
Alarm only
Shutdown
Alarm only
Alarm only
Shutdown
Overspeed
Shutdown
Shutdown
Shutdown
Approx. shipping
dimensions in inches
(mm)
Approx. Shipping
Weight in Lbs (kg)
Approx. shipping
dimensions in inches
(mm)
Approx. Shipping
Weight in Lbs (kg)
85 (39)
32 l x 29 w x 26 h
(813 x 737 x 661)
115 (52)
Wall Mount
Starting Voltage
Floor Mount
August 2016
Technical Data
GPD Diesel Fire Pump Controller
Seismic
TRU Compliance, LLC
Certification
A Tobalski Watkins Affiliate
Company
Seismic
Certification
Mounting
details
Seismic
Information
IBC
2015,
CBC
2016
Test
Seismic
Criteria Parameters
ICCES
AC156
SDS
z/h
IP
2.0
1.0
1.5
3.20
2.40
1.33
0.53
3.2
0.0
1.5
3.20
1.28
2.13
0.85
ASCE 7-10
Chapter 13
10.0
1.0
0.1
0.1
1.0
10.0
Frequency, f (Hz)
Horiz. Level 1
Vert. Level 1
Notes:
Components are tested in accordance with ICC-ES AC156, IBC 2015 & CBC 2016.
OSHPD Special Seismic Certification Preapproval (OSP)
August 2016
Technical Data
GPD Diesel Fire Pump Controller
C14
C15
C16
C17
C19
D4
D6
D7A
A12
D7B
Ax
D8A
D8B
B1
D9A
B2
D9B
B3
D9C
B4
B5
D11
B6
D11A
B7
D12
Tropicalization
B8
D25
Mounting stand
B9
D25A
B10
D25B
B11
D25C
B12
D25D
B13
D26
Bx
D26A
D27
C5
D28
C6
D29
C7
D30
C8
D31
C9
D32
D33
C13
A1
A2
A3
A4
A5
A6
A7
A8
A9
A11
Note: Options chosen from this page are not electrically represented on the wiring schematics in this submittal package.
August 2016
Technical Data
GPD Diesel Fire Pump Controller
L01
L14
Russian
L02
French
L15
Turkish
L03
Spanish
L16
Swedish
L04
German
L17
Bulgarian
L05
Italian
L18
Thai
L06
Polish
L19
Indonesian
L07
Romanian
L20
Slovenian
L08
Hungarian
L21
Danish
L09
Slovak
L22
Greek
L10
Croatian
L23
Arabic
L11
Czech
L24
Hebrew
L12
Portuguese
L25
Chinese
L13
Dutch
Note: Options chosen from this page are not electrically represented on the wiring schematics in this submittal package.
August 2016
Technical Data
GPD Diesel Fire Pump Controller
ViZiTouch Operator Interface
3
PMS 295
PMS 361
Noir
10
1
12
11
13
1 - Power on LED
2 - Color touch screen
3 - Alarm LED
4 - HOME page button
5 - ALARM page button
6 - CONFIGURATION page button
7 - HISTORY page button
August 2016
14
8 - USB port
9 - CRANK 1 button
10 - CRANK 2 button
11 - Contextual navigation pad
12 - STOP button
13 - RUN TEST button
14 - HELP button
Model:GPD
Built to the latest edition of the NFPA 20 standard
3/8" [10] X4
27 1/8" [689]
26 1/8" [663]
23 3/4" [600]
10" [253]
22 1/4" [564]
9" [228]
See Notes
28 7/8" [734]
27 5/8" [700]
29 7/8" [760]
23 1/2" [597]
6 7/8" [174]
2 7/8" [73]
19 1/8" [486]
12 7/8" [327]
47 7/8" [1208]
22 1/2" [571]
Sensing Line Connection - 1/2 " F.NPT
13 1/2" [343]
6 5/8" [168]
5" [127]
Notes:
7 1/8" [183]
1 1/4" [31]
REV.
NYC
Dpt of Building
Approved
2016
1
2
3
DESCRIPTION
Change Solenoid Valve Cover
Added Seismic Logo
Modified Tornatech & Seismic Logo
Drawing number
DD/MM/YY
20/11/14
21/08/15
11/04/16
GPD-DI500 /E
CDL
All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.
Model:GPD
Built to the latest edition of the NFPA 20 standard
Designation
Description
Filter
CB1-2
BC1-BC2
CB3-4
GPDB
SS1
MB
IS1
Isolating Switch
BC1
MB
DANGER
CB1
CB2
CB3
CB4
BC2
F
SS1
GPDB
RATING
LABEL
Internal Layout
REV.
NYC
Dpt of Building
Approved
2016
IS1
2
3
4
5
DESCRIPTION
Change CB position
General Revision
Added Seismic logo
Modified Tornatech & Seismic logo
DD/MM/YY
09/04/15
26/06/15
21/08/15
11/04/16
Drawing number
GPD-LY600 /E
All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.
1L
L'
120-240 Vac
50-60Hz
N
E
N'
CB2
53
14
CB1
Filter
1N
Model:GPD
13
54
Battery Charger 1
53
54
Power Available
BATT.
+ _
63 11
Controller Trouble
(Fail Safe)
Engine Run
14
24
11
24
12
22
14
24
11
24
12
22
14
24
11
24
12
22
14
24
11
24
12
22
14
24
11
24
12
22
14
24
11
24
12
22
B1 B2
15 16
Battery Charger 2
ALARM
BATT.
+ _
SUPPLY
L
Com NO NC
17 18
13 54
ALARM
BOOST
Com NO NC
B1 B2
83 11
19 20
21 22
SUPPLY
L
14 54
J38
TB2
Yellow/Green
J24
Blue
SV1
J40
TB3
J16
AI5-IN
J42
TB4
J14
AI4-IN
J37
TB5
J15
AI3-IN
J39
TB6
+ Gnd
-
Brown
Analog Input
Flow / Spare Temperature
SV1
Analog Input
Fuel Level
Analog Input
Water Level / Suction Pressure
J17
AI2-IN
AI1-IN
21
Discharge Pressure
Transducer
PT1
Red
J18
Low Fuel Level
BOOST
White
Black
22
*J1
**J2
23
24
25
J25
53
Vac
J44
26
Power Available
54
Vac
27
28
(Re-Assignable)
Temperature
Sensor 1
29
30
(Re-Assignable)
J11
J8
P1
TM1
J6
ViZiTouch
Main Board
MP+
J35
P1
MP-
J3
P2
J16
(-)
304
304
305
305
310
310
311
311
312
312
24V
GND
COM
DI0
COM
DI1
COM
DI2
Main Switch
B1+
J1
B1CF1
G
B2+
J107
B2CF2
J104-1
Engine Run
J104-2
Overspeed
J104-3
J19-2
64
J104-4
J19-1
84
J104-5
J46-2
62
Battery 1
J104-6
J46-1
Battery 2
J104-7
J2-2
G
63
Start Contactor 1
J104-8
Start Contactor 2
10
10
J104-9
J3-2
Ground
11
11
J104-10
J3-1
83
Ground
11
11
J104-11
J45-2
82
12
12
J104-12
J45-1
REV.
1
2
3
62
6
J2-1
NYC
Dpt of Building
Approved
2016
COM
Vext
SS1
30
J106
G
HV+
J103
AB1
J13
DI3
303
COM
303
DI4
J4
COM
302
DI5
302
COM
DI6
301
COM
301
DI7
J14
Red
Black
(+)
31
15
16
17
18
Battery Charger 1
19
20
21
22
Battery Charger 2
OFF
32
AUTO
HAND
CB3
11
63
11
83
82
8
CB4
DESCRIPTION
Added Re-Assignable Inputs
Added Seismic Logo and IS1
Modified Tornatech & Seismic Logo
Drawing number
DD/MM/YY
08/04/15
21/08/15
11/04/16
GPD-WS602 /E
CDL
All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.
Model:GPD
Built to the latest edition of the NFPA 20 standard
Located in Controller
Engine Run Alarm Contact
11-14
11-12
21-24
21-22
Normally Opened
Closes to alarm
Normally Closed
or
or
Opens to alarm
14
11
12
24
21
22
J38
TB2
M
Louvers Motor
REV.
NYC
Dpt of Building
Approved
2016
0
1
2
DESCRIPTION
First Issue
Added Seismic logo
Modifed Tornatech & Seismic logo
DD/MM/YY
25/05/15
21/08/15
11/04/16
Drawing number
GPD-TD403 /E
All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.
Model:GPD
Built to the latest edition of the NFPA 20 standard
Power Supply
Alarm Contacts
120-240 Vac
50-60Hz
IS1
N
G
Controller Trouble
(Fail Safe)
Engine Connections
3
4
5
6
8
J104-1
J104-2
J104-3
J104-4
J104-5
J104-6
J104-7
Louver Activation
Circuit
Engine Run
Main Switch in
HAND or OFF
Start Contactor 1
J104-8
10
Start Contactor 2
10
J104-9
11
J104-10
11 Ground
12
301
302
303
304
305
310
311
312
Ground
Energize to Stop Solenoid
11
J104-11
12
J104-12
301
305
J103
J36 - 14
J36 - 11
J36 - 12
Normally Closed
Opens to alarm
J36 - 24
TB1
J36 - 21
J36 - 22
Normally Opened
Closes to activate
J38 - 14
J38 - 11
J38 - 12
Normally Opened
Closes to alarm
J38 - 24
TB2
J38 - 21
J38 - 22
Normally Opened
Closes to alarm
J40 - 14
J40 - 11
J40 - 12
Normally Opened
Closes to alarm
J40 - 24
TB3
J40 - 21
J40 - 22
Normally Opened
Closes to alarm
(Re-Assignable)
J42 - 14
J42 - 11
J42 - 12
Normally Opened
Closes to alarm
J42 - 24
TB4
J42 - 21
J42 - 22
Normally Opened
Closes to alarm
(Re-Assignable)
J37 - 14
J37 - 11
J37 - 12
Normally Opened
Closes to alarm
J37 - 24
TB5
J37 - 21
J37 - 22
Normally Opened
Closes to alarm
(Re-Assignable)
J39 - 14
J39 - 11
J39 - 12
Normally Opened
Closes to alarm
J39 - 24
TB6
J39 - 21
J39 - 22
22
*J1
**J2
23
24
25
26
J25
27
28
29
30
REV.
NYC
Dpt of Building
Approved
2016
312
(Re-Assignable)
(Field
Programmable)
Normally Closed
Opens to alarm
Normally Closed
Opens to alarm
311
Field Connections
Normally Closed
Opens to alarm
Normally Closed
Opens to alarm
310
(Re-Assignable)
Normally Closed
Opens to alarm
Normally Closed
Opens to alarm
304
Normally Closed
Opens to alarm
303
Normally Closed
Opens to alarm
Normally Closed
Opens to alarm
302
Common Engine
Trouble
Common Pump
Room Trouble
Normally Closed
Opens to activate
Normally Closed
Opens to alarm
11
Normally Opened
Closes to alarm
Normally Opened
Closes to alarm
(11-12-14) / 8A
(21-32-24) / 5A
2
3
4
DESCRIPTION
Added Seismic logo
Louver activation circuit added
Modifed Tornatech & Seismic logo
DD/MM/YY
21/08/15
08/12/15
11/04/16
Drawing number
GPD-TD602 /E
All right reserved. This drawing and the information contained or depicted herein are the sole property of Tornatech Inc. Copies are communicated to the recipient in strict confidence and may not be retransmitted, published, reproduced, copied or used in any manner, including as the basis for the manufacture or sale of any products, without the express prior written consent of Tornatech Inc.