Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Year/Semester: IIIIIl
Duration: 3hrs
ANSWER KEY
].
2.
3.
4.
5.
6.
7.
8.
9.
10.
I.
2.
3.
4.
5.
6.
I st angle
One fourth
60
20
Clearance
Non-coaxial
ANSWERS
7. 6
8. Upper deviation
9. ]3
]0. Fine
A.
Part- B (2 x 10 = 20 Marks)
Sketch the conventional representation of the following machine elements
c.
e.
Bearings
lyFind the limit dimensions of the shaft and hole on the shaft basis system for a basic size of 20 mm
diameter with an interference of 0.10 mm. The tolerance on the hole is 0.025 mm and the tolerance on
the shaft is 0.050 mm.
Maximum limit of hole = Minimum limit of hole + Tolerance on hole = 19.9 + 0.025 = <j> 19.925 mm
(3 Marks)
Mark)
Minimum limit of shaft = Maximum limit of shaft - Tolerance on shaft = 20 - 0.05 = <j> 19.950 mm
(3 Marks)
Limits of Hole:
Maximum limit =
19.925 mm
Minimum limit =
19.900 mm
Limits of Shaft:
Maximum limit = 4> 20.000 mm
Minimum limit =
19.950 mm
Part- C (1 x 70 = 70 marks)
13. Assemble the parts of Milling fixture and draw the following views:
Front view half section, Top View and left side view
------------------