Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Product Name
HUAWEI BTS3900
Document name
Confidentiality Level
INTERNAL
Prepared by
BELKADA Samir
Prepared date
27/09/2011
Contents
1...................................................................................... Indoor BTS Installation 2
1.1
1.2
1.3
1.4
1.5
1.6
Huawei Confidential
Page1, Total 22 ,
1.8
1.9
1.10
1.11
1.12
1.13
1.14
Site cleaning............................................................................................................................. 15
2.2
2.3
2.4
BTS Integration......................................................................................................................... 17
2.5
2.6
2.7
201612-11
Huawei Confidential
Page2, Total 22 ,
1.1
201612-11
Huawei Confidential
Page3, Total 22 ,
1.2
Respect the
color ring tape
for each cell
(red, yellow and
blue)
900M
900M &1800M
CPRI cables to down CPRI port
on the RFU (Not up CPRI port)!
Notes: Connect the CPRI and the RF cables according to the engineering design ( BTS dual
band design from CME ConnectorTool software)
201612-11
Huawei Confidential
Page4, Total 22 ,
1.3
201612-11
Huawei Confidential
Page5, Total 22 ,
E1 Cable
Alarm Cable
Power Cable
201612-11
Huawei Confidential
Page6, Total 22 ,
1.4
201612-11
Huawei Confidential
Page7, Total 22 ,
1.5
HUAWEI DDF
1.6
1.7
Huawei
E1 DDF
Huawei
Responsible
OTA
DDF
Huawei
Responsible
OTA
IDU
OTA
Responsible
201612-11
Huawei
E1 DDF
Huawei
Responsible
OTA
DDF
Huawei
Responsible
Huawei Confidential
OTA
Responsible
Page8, Total 22 ,
1.8
No.2 E1
No.3 E1
No.4 E1
201612-11
PIN
X.19
X.20
X.1
X.2
X.21
X.22
X.3
X.4
X.23
X.24
X.5
X.6
X.25
X.26
X.7
X.8
Wire Color
gray
white
blue
white
blue
red
orange
white
orange
red
green
white
green
red
brown
white
Remarks
TX+
TXRX+
RXTX+
TXRX+
RXTX+
TXRX+
RXTX+
TXRX+
RX-
Huawei Confidential
Page9, Total 22 ,
1.9
Huawei
Alarm DDF
Huawei
Responsible
OTA
Alarm System
OTA
Responsible
Ext-alm1
201612-11
RJ45 port
Alarm configuration
Rectifier alarm
Door alarm
Battery alarm
Fire alarm
Huawei Confidential
Page10, Total 22 ,
201612-11
Huawei Confidential
Page11, Total 22 ,
201612-11
Huawei Confidential
Page12, Total 22 ,
201612-11
Huawei Confidential
Page13, Total 22 ,
E1 cable label
201612-11
Huawei Confidential
Page14, Total 22 ,
201612-11
Huawei Confidential
Page15, Total 22 ,
201612-11
Huawei Confidential
Page16, Total 22 ,
201612-11
Huawei Confidential
Page17, Total 22 ,
2 BTS Integration
2.1
2.2
BSC engineer perform the loop test with OTA to check the E1 link from Microwave
IDU to BSC
Huawei
BTS
Huawei
E1 DDF
Huawei
Responsible
OTA
DDF
Huawei
Responsible
OTA
IDU
OTA
Responsible
OTA
DDF
Huawei
DDF
Huawei
BSC
BTS Site
201612-11
Huawei Confidential
BSC
Page18, Total 22 ,
2.3
2.4
BTS Integration
If the BTS is powered on and E1 connection is done without problem, the BTS can
be integrated automatically.
If the BTS cant be integrated, site engineer should visit the sites for
troubleshooting.
201612-11
Huawei Confidential
Page19, Total 22 ,
2.5
When you go to the sites, please take necessary tools and materials and try to
close the installation problem in sites. Do not just record and report the problem.
1) Key for sites;
2) PC, Ethernet cable and necessary softwares (SMT)
3) Multimeter;
4) E1 connection tool;
5) E1 cable (20 meters);
6) Key for Indoor BTS3900;
7) Key for outdoor BTS3900A;
8) Key for the outdoor transmission cabinet;
9) DC power cable and connectors (10 meters);
10) AC power cable and connectors (10 meters);
2.6
No
Problem
Solution
Power on BTS
Reconnect E1 cable
Transmission problem
201612-11
Huawei Confidential
Page20, Total 22 ,
No
Problem
Solution
(BSC engineer will check status)
Physical loop from Huawei DDF to BTS to
check the E1 cable connection;
(If the LIU0 LED light is off, the E1 cable
connection is OK)
OTA didnt connect E1 cable from IDU Contact OTA deployment engineer for
to OTA DDF
help and connect the E1 cable by ourself
10
11
[Outdoor] OTA didnt connect AC power Record the problem and inform OTA
cable from TGBT to the fuse (for 2G deployment engineer and Huawei RPM
BTS)
12
[Outdoor] OTA didnt provide AC power Connect the AC power cable by ourself
cable from fuse (for 2G BTS) to BTS
13
[Outdoor] OTA outdoor power doesnt Record the problem and inform OTA
work
deployment engineer and Huawei RPM
14
[Outdoor] No key for OTA outdoor Contact with OTA deployment engineer
transmission cabinet
201612-11
Huawei Confidential
Page21, Total 22 ,
2.7
2. Also please check with BSC engineer that if he can see the BTS in BSC.
If the BTS can be monitored in BSC, the BTS is integrated successfully!
3. Check if there is any alarm of the BTS in site. All the LED lights should be off or
green. No any red light.
4. Check with BSC engineer if there is any alarm of the BTS in BSC.
201612-11
Huawei Confidential
Page22, Total 22 ,