Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
I Introduction to Valves
1.1. Valve
Valves are mechanical devices specifically designed to
direct, start, stop, mix, or regulate the flow, pressure,
or temperature of a process fluid.
Berdasarkan atas fungsinya, aplikasinya, dan
rancangannya, valve dapat dibedakan ke dalam
beragam kelas styles, sizes, dan ragam pressure.
Tipe yang umum ditemukan adalah plug, ball, globe,
butterfly, dan gate valves.
Valve dapat dibuat dari berbagai material seperti:
steel, iron, plastic, brass, atau sejumlah material
paduan khusus lainnya.
Komponen-komponen utama sebuah valve diberikan
pada Gbr. 1
Training on Valve Technology
The internal
elements of a valve
are collectively
referred to as a
valve's trim.
The trim typically
includes a disc,
seat, stem, and
sleeves needed to
guide the stem.
A valve's performa
nce is determined
by the disk and
seat interface and
the relation of the
disk position to the
seat.
Gbr. 2
Manual Valve
Gbr.3
Control Valve
Training on Valve Technology
Gbr. 4
Ball Valve
Gbr. 5
Gate Valve
Gbr. 6
Plug Valve
Training on Valve Technology
Gbr. 7
Globe Valve
Gbr. 8
Butterfly Valve
Training on Valve Technology
throttling
closed
1. On-off Valves
Terkadang juga disebut sebagai block valve.
Kelompok valve ini yang umum dijumpai: gate, plug,
ball, pressure relief, dan tank-bottom valves.
Jenis on-off valve umumnya hand-operated, walaupun
dapat diotomasi dengan tambahan aktuator.
Pressure-relief valves adalah self-actuated on-off
valves yang dapat terbuka hanya jika preset pressure
dilampaui (mencegah over pressuration).
Pressure-relief valves dibagi menjadi 2: Relief valves,
untuk aplikasi pada fluida cair dan safety valves,
untuk aplikasi pada fluida gas.
10
2. Non-return Valves
Nonreturn valves memungkinkan fluida untuk
mengalir ke suatu arah yang diinginkan (hanya satu
arah saja).
Semua check valves termasuk ke dalam kelompok
nonreturn valves.
Valve jenis ini digunakan untuk mencegah terjadinya
backflow yang tidak diinginkan.
Contoh aplikasi: untuk melindungi instalasi pompa
atau kompresor dari backflow saat shut down.
Nonreturn valves juga digunakan dalam sistem proses
dengan variasi tekanan yang harus dijaga secara
terpisah.
Training on Valve Technology
11
12
3. Throttling Valves
Valve jenis ini digunakan untuk mengatur aliran,
temperatur, atau tekanan.
Operasi throttling valves: manual (handwheel or
lever) atau dengan kontrol otomatis, Gbr. 13(a).
Pressure regulators adalah throttling valve yang
memvariasikan posisi valve untuk menjaga tekanan di
hilir valve tetap konstan, Gbr. 13(b)
Automatic control valves atau control valves is a term
commonly used to describe valves that capable of
varying flow conditions to match the process
requirements dilengkapi dengan actuator.
13
14
15
16
Manual
Otomatis
17
18
19
10
20
Gbr. 16 Severe service valve designed to handle highpressure drop, high temperature liquid-sodium application
Training on Valve Technology
21
11
22
23
12
24
2. Reduced-Port Size
Reduced-port valves are those whose closure
elements restrict the flow (area of closure element is
less then the area of the inside diameter of pipeline.)
Pembatasan aliran menyebabkan terjadinya pressure
drop saat aliran melewati closure element dan
sebagian tekanan dapat direcovery setelahnya.
The primary purpose of reduced-port valves is to
control the flow through reduced flow or throttling,
which is defined as regulating the closure element to
provide varying levels of flow at a certain opening of
the valve.
25
13
26
DN (mm)
NPS (in.)
DN (mm)
0.25
8.0
200
0.5
15
10.0
250
0.75
20
12.0
300
1.0
25
14.0
350
1.25
32
16.0
400
1.5
40
18.0
450
2.0
50
20.0
500
2.5
65
24.0
600
3.0
80
36.0
900
4.0
100
42.0
1000
6.0
150
48.0
1200
27
150
16
300
40
600
100
900
160
1500
250
2500
400
4500
700
Note:
PN is an approximation to the corresponding ANSI pressure class, and should
not be used as an exact correlation between two standards.
Training on Valve Technology
14
28
Reference
Skousen, P.L., Valve Handbook, McGraw-Hill, USA,
1998.
Fisher, Control Valve Handbook, Fisher Control
International, USA, 2001.
29
30
15