Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
equal to zero
any value042990533
2-A contractor has to supply 5000 bearings per day to an
automobile manufacturer. He finds that, when he starts a
production run, he can produce 15000 bearings per day. The
cost of holding a bearing in stock per one year is Rs. 2 and the
setup cost of a production run is Rs. 1,100. How frequently
should the production run be made? (Take number of working
days in a year = 300)
4 days
10 days
6 days
8 day
3-An auto company manufactures cars and trucks. Each vehicle
must be processed in the paint shop and body assembly shop.
If the paint shop were only painting trucks, then 40 per day
could be painted. If the paint shop were only painting cars, then
60 per day could be painted. If the body shop were only
producing cars, then it could process 50 per day. If the body
shop were only producing trucks, then it could process 50 per
day. Each truck contributes $300 to profit, and each car
contributes $200 to profit. What will be the maximum profits of
the company?
100
120
150
180
4-The number of plates of food ordered per hour at a restaurant
follows Poisson distribution, with an average of 30 plates per
hour being ordered. What is the probability that the time
between twoconsecutive orders is between 1 and 3 minutes?
0.19
0.38
0.5
0.76
5-A company orders 2250 units every 1.5 month. The cost of
one setup is Rs 500. The holding cost is Rs 0.15 per unit per
month and the shortage cost of one unit is Rs 20 per year.
Percentage saving in total annual cost by ordering EOQ will be
___________.
10.51
5-A firm marketing a product has four sales men S1, S2, S3 and
S4 and C1, C2 and C3 are the three customers. The probability of
making a sale to a customer by each salesman is given in the
table below:
9.24
10.24
593.75(590 - 595)
12-In the requirement of flywheel in punching press, the cycle
time is 6 seconds. The stroke is 125 mm. The thickness of the
sheet metal to punched is 3 mm. The time required in seconds
for punching the sheet metal is ____________.
0.072(0.065 - 0.078)
13-A uniform disc of 50 kg mass, 800 mm diameter and 840
rpm rotational speed is mounted on a shaft. The plane of the
disc is not perfectly at right angles to the axis of the shaft but
has an error of 1.5 degree. The gyroscopic couple acting on the
bearing is _________ Nm.
404.96(404 - 406)
14-Two involute gears in a mesh have a velocity ratio of 3. The
arc of approach is not to be less than the circular pitch when
the pinion is the driver. The pressure angle of the involute teeth
is 20. The least number of teeth on each gear is
17, 51
18, 54
19, 57
20, 60
15-A cam that is designed for cycloidal motion drives a flatfaced follower. During the rise, the follower displaces 1 cm for
180 of cam rotation. If the cam angular velocity is constant at
100 rpm the displacement of the follower at a cam angle of
60, will be
2.95 cm
1.55 cm
1.95 cm
2.45 cm
16-For maximization Linear Programming Problem, the
objective function coefficient for an artificial variable is
-m
zero
16 days
23 days
18-Annual usage = 12,000 units, ordering cost = Rs. 60 per
order
Carrying cost = 10% of unit cost, unit cost of item = Rs. 10 and
lead time = 10 days.
There are 300 working days/year. In the past two years the use
rate has gone as high as 70 units per
day. For a reordering system based on the inventory level, the
average inventory (units) is
300
0
700
900
200 units
1834.6 kJ
1638.6 kJ
1384.6 kJ
1483.6 kJ
shape factor
roughness facto
23-A pump draws oil (specific gravity 0.8) from a storage tank
and discharges it to an overhead tank. The mechanical energy
delivered by the pump to the fluid is 50 J/kg. The velocities at
the suction and the discharge points of the pump are 1 m/s and
7 m/s, respectively. Neglecting friction losses and assuming
kinetic energy correction factor to be unity, the pressure
developed by the pump (in kN/m2)
19.2
20.8
40
80
24-A storage vessel exposed to atmosphere (absolute pressure
= 10.3 m of water) has a diameter of 3 m and is initially filled
with water to a height of 2 m. The pump draws water from the
vessel and is located at an elevation of 5 m above the bottom
of the vessel. The frictional head loss in the suction pipe is 2 m
of water. If the vapour pressure of the liquid at the temperature
of operation is 3 m of water, then the available NPSH is
2.3 m
5.3 m
6.3 m
8.3 m
757.34 kPa
650 kPa
1000 kPa
1200 kPa
28-A key capable of tilting in a recess milled out a shaft is
known as
Wood-ruff key
Feather key
31.36%
52.16%
29.19%
31-A mass of air is stirred by a paddle wheel in an insulated
constant volume tank. The velocities due to stirring make a
negligible contribution to the internal energy of the air. Air flows
at through a small valve in the tank at the rate of 0.9 kg/h to
keep the temperature in the tank constant. At a certain instant,
the pressure and tank volume are found to be 1 MPa and 0.15
m3 respectively. If the power to the paddle is 0.2 kW, the
temperature of air in the tank is ____________ C. 523.02(5
9.44 cm
10.74 cm
0.5181 kJ/kgK
0.461 J/kgK
35-Metal balls of mass 20 kg, initially at a temperature of 250C
and with specific heat 0.5 kJ/kgK are quenched in an oil both of
initial temperature 20C and specific heat 2 kJ/kgK. During the
quenching, a paddle wheel drawn by a 250 W motor is
1320.75 Nm
3641.5 Nm
2641.5 Nm
5251.2 Nm