Sei sulla pagina 1di 1

EMC introduced new feature for CLARiiON with Flare release 29

CLARiiON Flare release 29 (04.29.000.5.001) introduce support for several new features as follow:

1) Virtualization-aware Navisphere Manager - Discovery of VMware client always were difficult in earlier
release but Flare 29 enables CLARiiON CX4 users and VMware administrators to reduce infrastructure
reporting time from hours to minutes. Earlier releases have allowed only a single IP address to be assigned
to each iSCSI physical port. With Flare 29, the ability to define multiple virtual iSCSI ports on each physical
port has been added along with the ability to tag each virtual port with unique VLAN tag. VLAN tagging has
also been added to the single Management Port interface. It should be noted that the IP address and VLAN
tag assignments should be carefully coordinated with those supporting the network infrastructure where the
storage system will operate

2) Built-in policy-based spin down of idle SATA II drives for CLARiiON CX4 - Lowers power requirements in
environments such as test and development in physical and virtual environments. Features include a
simple management via a set it and forget it policy, complete spin down of inactive drives during times of
zero I/O activity, and drives automatically spin back up after a "first I/O" request is received.

3) Virtual Provisioning Phase 2 - Support for MirrorView and SAN Copy replication on thin LUNs has been
added.
4) Search feature Provides users with the ability to search for a wide-variety of objects across their
storage systems. Objects can be either logical (e.g., LUN) or physical (e.g., disks).

5) Replication roles - Three additional roles have to be added in Navisphere: Local Replication Only,
Replication and Replication/ Recovery.

6) Dedicated VMware software files - VMware software files (i.e. NaviSecCLI, Navisphere Initialization
Wizard) are now separate from those of the Linux Operating System.

7) Software filename standardization - all CLARiiON software filenames beginning with FLARE Release 29

8) Changing SP IP addresses - SP IP addresses can now be changed without rebooting the SP. Only the
Management Sever will need to be rebooted from the Setup page, which results in no storage system
downtime.

9) Linux 64-bit server software Native 64-bit Linux server software files simplify installation by eliminating
the need to gather and load 32-bit DLLs.

10) Solaris x64 Navisphere Host Agent Release 29 marks the introduction of Solaris 64-bit Navisphere
Host Agent software. This Host Agent is backward compatible with older FLARE release.

From Umesh Kumars Document Archive Page 1

Potrebbero piacerti anche