alasconi , Matteo Ferroni , Vardan Galstyan, Emanuela Gobbi, Andrea Ponzoni, Alberto Vomiero, Dario Zappa, Veronica Sberveglieri, Giorgio Sberveglieri* SENSOR, University of Brescia and CNR-IDASC, via valotti 9, 25133 Brescia, Italy a r t i c l e i n f o Article history: Received 23 August 2012 Received in revised form 29 September 2012 Accepted 4 October 2012 Available online 22 October 2012 Keywords: Nanowire Metal oxide Chemical sensors a b s t r a c t This paper focuses on the capabilities and development prospects of nanostructur ed metal oxides (MOX) representing the most versatile and richest class of materials in terms of elect ronic structure and structural, chemical, and physical properties. MOX nano-materials with controlle d composition, surface terminations, and crystalline structures to be used as chemical sensors as a new area in analytical chemistry and instrument engineering are discussed. Their principles of operation, and bas ic characteristics are outlined and main applications of MOX sensor technology are presented. 2012 Elsevier B.V. All rights reserved. 1. Introduction Monitoring all aspects of the environment in real time has been one of the key requirement of the last decades, and this in turn led to a great effort in terms of research and funding for the development of all kind of sensors. Chemical sensors are in the research focus from several years due the increasing concerns for pollution and its effects on health and safety. Concerning metal oxides chemical sensors, it is well known from six decades that their eleckbkknllllllllllt studied material is by far SnO2, but also other materials such as TiO2, WO3, ZnO and In2O3, have been considered. At SENSOR laboratory the studies on chemical sensors started in 1988 with tnh;;;;;;;;;;;; E-mail address: sbervegl@tflab.ing.unibs.it (G. Sberveglieri). Some of the preparatiovjkvjkjchiometry, stabilize crystalline phase, grain size, porosity, interfaces, and defects. Thermal