Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
http://www.intergraph.com/global/jp/ppm/EYECADhome.aspx
ver.6.81
WantedInnovativeStandand is here !
EYECAD is a considerably practical CAD system for 3-D spatial plant design,which has been uniquely
developed based on our abundant experience as a leading engineering company.
POINT
POINT
4 Shorten schedule
POINT
POINT
5 Reduce Costs
1. Designing Cost
Various data of change requirements can be transferred at
customer-site to design engineer, leading to shortening the designing
process..
2. Construction cost
No design change due to conflict at site, and proper material control
result in no surplus stock and waiting time of workers.
3. Material cost
Calculating correct/required quantity of material and immediate
procurement on each phase save data collection time for for quotation,
and avoid surplus stock.
4. Inspection cost
Outputting the data of implementation test spec, test loop figure, and
welding point spec reduce the costs on each phase.
POINT
SOLUTION
EYESPEC
General reference DB
management system
Option Software
EYESUPT
EYEPRD
EYEPID
EYEPID
EYESTEEL
EYEPFA
Output Software
EYEPIPE
3D PlantPiping design
system
EYELIST
EYEVIEW
Procurement
SYSTEM
Option Sub-System
EYESPEC
EYEPRD
EYESUPT
EYEPIPE
EYEPFA
EYELIST
column No.,floor,frame,structure,hand-rail,stairs,
equipment,piping duct,(piping support)
overall plant & equipment layout,clash check
3D piping assembly,spool drawing,MTO,
pipe line list,piping construction B/Q,inspection
spec/list,etc.
equipment skeleton drawing,framing plan,member MTO
Conversion to DXF(Model)
EYESTEEL
Pipe-run index,valve,accessory,instrument
piping fittings,B&N,gasket,insulation
B/Q (length,weight,inch-m,DIA-Inch,
painting area,internal volume)
cut-pipe,pipe cut-plan,
Bill of PMS-defined components with
commoditycode
Welding-point information,management
system of piping material ordering
EYEPIECE
Piece drawing for piping fabrication &
inspection
EYEPID
PFDUFDPID
line list,equipment list
valve,accessary & instrument B/Q,data transfer to 3D
Drawing output in color by attribution
piping consistency check between P&ID and 3D
P&ID Data Conversion to DXF
EFFECT
EYEVIEW
EYEVIEW-LT
Plant design review communication system
measurement, scale box & tag-comment,
plant model hard copy
EYECAD Engineering
EYECAD Flow of Engineering,Procure,Construction and Its Effect
System center
Site,
Framework &
Plot Plan
Equipment
Spec.List
Equipment
Layout
Drawing
Framework
Drawing
Pipe-Assembling
Drawing
Site,
Framework
Plot Plan
Frame,
structure
Stairs,
handrail
Equipment
Spec P&ID
Quick calculation of
material cost data,
required for
procurement and
construction, can be
performed.
Early and systematic
procurement work
Bill of
Materials
Ediit &
O/P of
Support &
G/A DWGs
Material &
construction
volume calculation
Total Cost
Estimation
Systematic
Material
Procure
Visually scrutiny and
study of plant design
for operability,safety,
and maintainability can
be feasible with owner
in the middle phase of
designing for better
result.
Support
Drawing
Spool Drawing
Overall
Review
Equipment Piping,Duct Design
adjustment
Crash/
Shape/Nozzle & Support
Conformity Correction
Input
Input
input
Check
P&ID is prepared as
logical diagram from the
basic design phase.
Various integrated
general data realize
quick cost calculation,
early material
procurement/generationof
final drawing.
Support center
PID
EYECAD
Process Plan
EYEexport 3D
Conversion of plant model to DXF &
VRML,others for some viewers,
Total Cost
Estimation
On-site
Materials Prefabrication
On-site
manufacturing Modification
Procurement
(60%)
& Installation
Material receipt
On-Site
PreOn-Site
of each
ajustment
Fabrication construction
&
modification
(90%)
section
Installation
High accuracy/rate of
pre-fabrication is
assured by leveraging
the fabrication spec,
pipe-cut plan,curve
data,welding
information,and
test-loop figure,etc.
Powerful Training/Support
system: sufficient assistance
after introduction
Minimizing on-site
reworks,repair and
welding
Reducing on-site work
including construction.
and Enhancing the
productivity and safety
of construction.
Reduce Time
Reduce
Designing
period
Reduce
construction
period
Integrated 3D Plant CAD SYSTEM
3
EYECAD provides the out-of-the-box practical engineering tool with wide range of standard database
already equipped,covering from FEED through field engineering,especially for onsite operation.
Now over half of domestic designing divisions have taken advantage of EYECAD in their process.
For the past 22 years, EYECAD has been utilized for designing, procurement and construction of
around half of the 3D plant models within the country,which released Version 6.0 in May/2002,
version 6.81 in May/2012.Version 6.81,and have provided more than 600 additional functions and
improvements.
system requirements
OS : 32bit Windows XP,Vista,7 or
First release : 1990.04
64bit Windows 7
Actual achievement :
Required Office Soft : Excel 2000 Upper
more than 2,400 (including export)
CPU : Core i5,i7
Installed customers : More than 190 Sites
Graphic Board : NVIDIA Qurdro,Geoforce Series
Price : Refer to the Price List.
Memory : more than 4GB
Monitor Size : larger than 24 inch, Resolution:more than 1024x768
EYECAD 3D Model Import/Export File list
No.
1
2
3
4
5
6
7
File
VRML1.0
Point-clouds
STL
OpenInventor
DXF
DWG
DGN
EXT
wrl
asc
stl
iv
dxf
dwg
dgn
EYECAD
Import
Planned on V6.90
Planned on V6.90
Planned on V6.90
O/P on 3D-FACE entity)
Planned on V6.90
Planned on V6.90
EYESPEC
D.B.
1) EYESPEC can make a plant attribute and (:STD) of piping materials and valves or so,which
is basic EYECAD use.It is an exclusive use system of the (:D.B.) creation for EYECAD user
companies and subcontractors.
2) Provides a wide range of out-of-the-box data including public standard such as JIS,JPI,
ISO,ASME and API,and more than 50 manufacturers'specific standard allowing to be changed
and added by a proj.
3) Pre-installed database for piping material standard (PMS),valve standard,various drawing
symbol and dimension.It easily utilizes as a project standard through copy,modification and
addition,and can be exported in text and Excel formats for project documentation.
Site
information
Valve specification with dimensions
Participant attribute
PMS Index
window
PMS Index
list
PMS edit
window
EYEPID
P&ID
Well-improved system with proven experience in the plants of various industries over past 20
years.
1Generates the drawing as well as engineering logic diagram,line-pipe run index,and automatic
calculations of each part.
2Includes the pre-installed various symbols and line-types for P&ID,supporting input in half
or less the time that is needed for general 3D system
3Shares the plant attribution and piping standard database (EYESPEC) with EYEPIPE for
consistency check against EYEPIPE 3D models
DWG
size
Piping Start
Piping End
Code
Start Connect
100
Start connect
to equip
P&ID drawing
15
Pre-installed
data
20
110
Standard valvessymbol
20
100
Instrument Symbol
120
Drawing function
EYEPIPE
1) Flexible operation with modern GUI and functions coloring objects individually EYEPIPE can
instantly switch a display mode between shading 3D and wire frame by selected object,even
in the same object type.Simple and outstanding operability realizes to display and modify
window,its attribution on one window,avoiding windows scattered over the screen.
2) Various object types and standard pre-installed EYECAD contains objects and standard ranging
from column No.,floors,handrails,stairs,frames,structures,equipment,piping,ducts,piping support
to database of lots of standard symbols,data,or dimensions,required for plant constitution.These
objects have their own attribution and show data-centric fundamental structure.
3) Easy implementation of contiguous/clash check EYECAD promptly performs contiguous check between
welding points of piping components, and clash check between provided objects in specific area,
and then displays those results regarding unconformity or clash part through just one click.
4) Instant display of 3D assembly drawing based on a quick hidden line process The attribution string
is automatically displayed on the drawing line of each object.Selecting and dragging-out the provided
area indicates the dimension.Plane view,solid view and perspective view can be easily drawn for it
represents piping in indicated size or less by single line,piping in more than indicated size by
double line.
5) Automatic-generation of piping spool drawing/interactive-output of the drawing with detailed
material data EYECAD allows it to be transferred to construction division.Entire isometric
drawing specific to any piping system is available for flashing test drawing.
6) Detailed BOM list in applicable output format to order Name,type,material,quantity and weight of
the following components are calculated;linelist,pipe,piping component,valve,accessory,instrument,
bolt/nut gasket,insulation,cladding and structure.Indicating the amount of construction work,
output format includes inch-meter,entire length,area,average size,and quantity by each material
group,and Dia-Inch by each connection type.
3D assembly DWG operation window
Updates in V6.90
1) Convert the point cloud data to
surface data
2) Convert to primitive shape such as
cylinder solid or the cuboid (cube)
3) Convert to mode data such as piping
or equipment (scheduled)
EYESUPT
1) The piping support drawing and bill of material are automatically produced along with pipe
section and line-mark by configuring piping support into piping model based on EYEPIPE.The
assembly and spool drawings include the support/fastener marks,and tag with data of position
and dimension.
2) The following attribution of a piping support model can be configured;
a) Tag No: unique symbol (area symbol) for support, serial letters indicating 3 elements
b) Comments c) JOB group d) Support class: each material letter of section steel and fastener
3)
4) Shaping a support requires to indicate one pair or more out of 40 kinds of support styles
such as gate and T-shape, and set attributions of tag,piping to be connected, each dimension
of component a) d),position,specification,and the connection method.ASUP (BS:text file) and
JSUPNO.csv can be also supported to add and modify at once the attributions of main support
unit or contents of title block in the drawing.
5) The resulting support drawing is automatically displayed in A4 document along with the
detailed drawing of hole of fixing bolts,position of street No,each dimension,and contents
of title/material block.
6) The piping assembly drawing displays the actual position of support as a symbol or solid shape,
including the data of position/dimension,tag and various fastener symbols by its feature.The
piping spool drawing also indicates the fastener symbols as well as installation dimension
and tag.
7) Bill of material is based on 4 kinds of specification described above. This table can be
exported as a text format,l_3dsm,and then available to sort it out with Excel,etc.
Piping support L/O Part(EYEPIPE)
Piping support: operation window
EYEVIEW-LT
All EYEVIEW-LT functions are involved in EYEPIPE modeling function.However this model data is
possible that retrieval by EYEVIEW-LT,The file saving of plant model added and reviced data is
impossible.
EYEVIEW-LT ensures simple communications such as design review,change commands,a check for the
plant model created by EYECAD.
Main features are as follows;
1) EYEVIEW-LT can perform an attribute check and viewing the inside of the plant model.
2) This system can add and correct tag papers (direction comments) in a plant model.
3) For the check of the matching after model change,users can change the model on the spot by
operation completely same as a model creation system.However,the form aftermodel change is
not saved.(Of course, tag papers and the scale box are saved.)
4) This system can save and retrieve the view screens.
5) This system can edit and save the color.
Tool-tip function
Displayed the attribute by ajusting cursor on
the object.
Screen Composition
The screen composition of EYEVIEW-LT is
same as the model creation of EYECAD
completely.
Ductangle Scale
Cylindrical Scale
Tag function
This is a Tag comment putting function in
plant model.This can also perform view
movements up to the place where users
choose a tag paper from a list.
Measurement function (Planned on V6.90)
Displayed by DWG dimension form
Space betw pipe center
EYELIST
1) EYELIST creates B/M, B/Q calculation and text files which can be used for procurement with
EYEPID and EYEPIPE.It outputs CSV styled B/M and B/Q by each parts and pipe run with
belonging line marks and plant XYZ position, we can verify various management.
2) By choosing required item on Excel description,users can make unification,sorting and change
of the contents, and users can also set up a style freely and output it.
3) Furthermore,this system also has the sorting function according to plant division blocks,
manufacturers,etc.
4) EYELIST has EYELIST-1 and EYELIST-2 EYELIST-1 performs calculation of attribution data.It
is useful for a necessary procurement process;line-list,valves,accessories,instruments,piping
parts,insulation,
painting, B/Q and pipe cut plan.
5EYELIST-2 is the information management system for the fabrication control and inspection.
Test Loop spool drawing : EYELIST-2
10
EYEPRD
1) By specifying a fluid-serial No. of the header piping model created by EYEPIPE,many items
required for each point information on the piping route which leads to the piping and
calculation between the point areautomatically output according to each piping line on
Excel Sheet.
2) All of calculation after this and a case studies are performed by the Excel side.
3) Fluid density and viscosity are calculated by the value of water as a default,and users can
change andre-calculate them.
4) Flux is calculated by the value set up in the model of EYEPIPE. When not set up,it is calculated
with a default value.
5) Pipe Run-Length of each part is set by Pipe Run-Length of each piping part with reference
to the multiple of the diameter of relevance defined by another table which is AFLENR
(Excel Sheet Name).Moreover,an additional change is possible for this table contents by
users.
6) Length of Point to Point is set for straight length of each center points.
7) Each sum total of Straight Length and Equivalent Length and these two totals are calculated
as friction pressure loss.Differential pressure in position of start & end of piping is
also calculated separately,and is calculated as sum total pressure.
8) The formula of Fanning is contained by Macro of Excel for calculation of friction pressure
loss,and it is also possible to change this Macro by users.
Piping Line Pressure Loss Caluculation Sheet e.g.
Valves sample
C
C
BEND
BEND
BEND
SCC
SCE
Material name
or
Function name
90Elbow
45Elbow
Pipe bend
Pipe bend
Pipe bend
Con Reducer
Ecc Reducer
BT
CBT
CTB
Tee branch
Tee branch curve
Branch Tee curve
3320
3320
3320
0
90
90
20
60
80
B45Y
B4FY
45Wye branch
45Wye fowrad branch
3306
3306
90
90
40
30
Func
tion
Mark
MATEL Radius
Angle
item
/
Deg
Code InDIA
90
1.5
3230
45
1.5
3190
90
0.1
3150
45
0.1
3150
60
0.1
3150
0
3096
0
3098
Func
tion
Mark
GATE
GLOB
CHEC
CHEC
NEED
BALL
BALL
DIAP
BELL
BUTT
Y.TY
PIST
VACU
EQUIV
LENG
/InDIA
12
6
60
15
30
12
19
11
Material name
or
Function name
Gate
Globe
Check
Check
Needle
Ball
Ball
Diaphragm
Bellow
Butterfly
Wye type
Piston
Vacuum
MATEL
item
Code
2101
2102
2103
2103
2104
2105
2105
2106
2107
2108
2109
2110
2111
Throat
Type
SWING
PISTON
FULL
REDU
Angle
Deg
0
0
0
0
0
0
0
0
0
0
0
0
0
EQUIV
LENG
/InDIA
7
300
83
600
300
1
7
100
300
300
60
600
300
EYEPFA
EYEPFA convert the piping route,the attribute of EYEPIPE and EYESUPT fastener data to the
piping stress analysis system widely used for stress analysis.
This function puts into automatic text files to the input form of the target piping stress
analysis system with the each place support information which input by EYESUPT.
1) As a standard reference data,material attributions which is required for the piping shape
analysis.
2) The allowable stress of the pipe at a given temperature,Young's modulus, specific gravity,
and the value of thermal expansion are formed into standard data, and values required for a
setup of temperature and pressure are to be automatically chosen and save into text file.
3Special and complicated piping like a jacket piping is also convertible.
Piping-Support model Convert Setting Dialog
As EYESUPT data
Control Data
Pipe segment
Pipe comment
Pessure Data
Tempereture Data
Guid
Straight pipe
Constant hunger
Reducer factor
10
Expansion factor
11
12
13
Tee connection
Fixed point
VStop suppport
virtical DIR restraint
12
EYESTEEL
1) EYESTEEL is a convert system from EYEPIPE struucture model to a structual analysis system.
2) The structural analysis system supports "STAN" series now.
3) Marks can be optionally set to each frame components.Structure information is converted
with the marks, component specification and connection information.
EYESTEEL contains the following
attribute databases.
This can be converted to a steel
structure calculation
system with these information.
Nodal Point
Boundary Condition
Material Property
Cross Section Performance
Member
Data
Mark
Edge Condition
Material Property
Size
a22
a58
kg/m
kg
a10
f10.2
f6.2
f10.2
i5
SS400
SS400
4.54
20.24
24.78
11.79
11.79
49.37
15.3
64.67
1.2
1.2
102.44
6.85
4.43
31.1
89.67
120.77
219.3
219.3
1811.88
1107.72
2919.6
0
0
3259.67
1016
1009
SS400
SS400
SS400
RC
18.6
36.7
72.4
0
Code
a14
4004
5021
5018
0
13
EYELISTOption
Piping material PO management system
Option
No.
Content
No.
Content
The No.3 & Order 2nd-5th cell is puted by manual 5 Auto billing by 1st purchase ratio X NET of this system
No.of unorderd
EYEPIECE
Piping Piece DWG System
EYEPIECE
Piping Fabrication
Inspection DWG System
14
http://www.intergraph.com/global/jp/ppm/EYECADhome.aspx
Minatomirai line
Queen's Tower
C 13F
Minatomirai Sta.
Shin-Takasima Sta.
Queen's
Square
Bashamiti Sta.
to O
funa
JR
Sakuragi-cho Sta. to Shona
ndai
way
JR LineMunicipal Sub
EYECAD
EYECAD is a copyright of INTERGRAPH Japan K.K.