10 Product Range
10.1 Pipe Specifications
Ductile Iron (Socket & SpigoY pipes are manufactured
by centrifugal process to meetin every aspect the
requirements of international Standard ISO 2531,
BSENSSS,
Al pipes hava standard 2 GS push - on joint.
The standaid effective length ofthe pips is 6 0 meters
However, 1096 of tne pipes can be supplied shorter than
rneters a8 per ISO-2691
Internal Costing
Pipes are lined internally with Portland cement (Sulphate
resistant type\). Carmant is applied by centritugal
‘rovass in cormpiance with ISO 4178 Thicknass of
‘cement s according fo ISO & BSEN standaras
'SADIP car offer any sillarant stocification o coating #8
por customar requirement.
‘SADIP Ductile ron Pipes Specifications
Py
External Coating
Pipas are coated externally by pure mstalic Zinc
(minimum 98.296 puri) ata rats of 200 gin, which
represents 50% rmoce than the requirement of ISO 8179
(DN $00 mm and abovs 120 g/m? or 200 gin? as per
customer request)
Zines then covered by 120 microns of bituminous caint
sper 150 8179-7
‘SADIP can ofr any aiferent soeciicetion oF coating as
par custornor requirement
Marking
“The following marking is castad on each pipe (on tha
sookst)
+ The nominal okamster of the pips (ON)
+ The type of socket [STD] which maans standard
‘pa
‘The manutacturar mark (SADIP)
‘= Anindication thatthe casting is ofthe duct iton
ees)
+ Date andladie no of casting
‘other markings on request
* Maxum angolr detection
Pipes morsocored by SADIP
TI Pp ot merutectaren by SN? tat con be suri