Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Analog Transceivers
Analog Transceivers represent certified implementations for the physical layer of the KNX communication protocol.
Media
TP
Model
E981.03
Description
KNX/EIB Transceiver
Picture
Company
ELMOS
TP
E981.23
ELMOS
TP
E981.33
ELMOS
TP
NCN5110
ON Semiconductor
TP
NCN5120
ON Semiconductor
TP
NCN5121
TP
NCN5130
ON Semiconductor
ON Semiconductor
TP
FZE 1066
SIEMENS
(Distributed by
Opternus)
Package: SOP 20
Available current for bus powered devices: 30 mA
@ 5 V & 5 mA @ 20 V
TP
KAIphys
GIRA/TAPKO
(Distributed by
Opternus)
Digital Transceivers
Digital Transceivers represent certified implementations for the physical layer and for (part of) the data link layer of the KNX communication protocol.
Media
TP
Model
TP-UART2 (IC)
TP-UART2+ (IC)
TP
TP-UART2 (PCB)
TP
KAIlink-UART
Description
Next generation of KNX transceiver. Digitally compatible
with its predecessor: communication stacks and drivers
can be used without modification. Enhanced features
including efficient stabilized 3.3 V and 5 V power supply
with 30 mA max. current (50 mA when 20 V not used),
switchable 20 V power supply with limiting function and a
smaller QFN 36 package.
TP-UART2+ Baud rate 115200 or 19200 baud:
TPUART2+ >< Host Controller.
Package: QFN 36.Available current for bus powered
devices: 50 mA @ 3.3 V or 5 V, 25 mA @ 20 V
The TP-UART 2 evaluation board offers an interface to
the KNX bus together with a Bus Transceiver Interface
(BTI) for quick development of your applications based
on TP-UART 2.
Support of TPUART and compatible devices.
Standard and extended frame format.
Long telegrams up to maximum of TPUART (64 byte).
Normal Link Layer mode and bus monitor mode.
Adaptable address check with sorted list or filter table.
Reaction on bus controlled by address check: ACK, NACK,
BUSY.
Receive or drop message controlled by address check.
Picture
Company
SIEMENS
(Distributed by
Opternus)
SIEMENS
(Distributed by
Opternus)
TAPKO
TP
MAP TP
WEINZIERL
Software implementation of the protocols defined in the KNX specifications, based on the OSI Reference Model.
Media
TP
Model
E-Stack
Description
Freescale HCS08 System Profile 2
Picture
TP
RENESAS
(Distributed by
Opternus)
TP
KAIlink-BIT
TAPKO
xxx
Company
EELECTRON
RF
KAIlink-RF
TAPKO
IP
KAIlink-IP
xxx
TAPKO
RF
MAP RF
xxx
WEINZIERL
IP
MAP IP
xxx
WEINZIERL
Software implementation of the protocols defined in the KNX specifications, based on the OSI Reference Model.
Media
TP, RF, IP
Model
System B
Description
Supports 8 to 23 bit microprocessors.
Picture
Company
ISE
TP
BIM M13x
SIEMENS
(Distributed by
Opternus)
TP, RF, IP
KAIstack
TAPKO
(evaluation board)
TP
TP, RF, IP
WEINZIERL
(evaluation board)
WEINZIERL
Modules
Modules represent certified implementations of the KNX communication protocol + (part of the) application program.
Media
TP
Model
KNX to SERIAL
Description
Serial interface
Picture
Company
EELECTRON
TP
Raspberry Pi interface
EELECTRON
TP
KNX Programmable
ISE
RF
RF Module
ISE
TP
SIM-KNX128
SIM-KNX250
TAPKO
(Distributed by
Opternus)
TP
KIMaip
TAPKO
(Distributed by
Opternus)
RF
RF-Module
TAPKO
TP
BAOS 820
BAOS 822
BAOS 830
BAOS 832
WEINZIERL
TP
WEINZIERL