Sei sulla pagina 1di 36

InDUSTRIAL

profiles

INTRODUCTION
ETEM is one of the leading aluminium extrusion companies in South Eastern Europe.
Founded in 1971, ETEM is a fully integrated designer and producer of architectural
systems and aluminium profiles for industrial applications.
With two production facilities, in Athens, Greece, and Sofia, Bulgaria, and an annual capacity
that exceeds 40.000 tons/year, ETEM guarantees continuous and uninterrupted product delivery.
Through continuous innovation and investments in infrastructure equipment and people,
ETEM is an international company with exports that exceed 70% of its production capacity
and presence in more than 20 countries.
With over 40 years of experience, in both sectors design and production of Architectural Systems
and Aluminium Industrial profiles, ETEM is dedicated to serve the customers with value added
products and services and build with them long lasting relations that are based on trust
through integrity and consistency.

EXTRUSION
With two production facilities, in Athens, Greece, and Sofia, Bulgaria, ETEM guarantees
continuous and uninterrupted delivery to all its customers.

WORKING STANDARDS
IN ETEM

Our production plants are equipped with 5 modern extrusion presses, producing a
wide range of aluminium profiles and more than 900 different standard profiles in
the following groups: L-profiles; flat bar profiles; round, rectangular and square tubes;
T-profiles; U-profiles. The modern equipment allows us to produce high-tech custom
profiles, precisely matching the clients drawings.

EN 573
Aluminium and aluminium alloys.
Chemical composition and form of
wrought products;

Extrusion
Press

Force

Billet
Diameter

Alloys

Cooling
Capability

Maximum
Extrusion Length

Production
Capability

SMS

27MN

8, 9

1000, 6082, 6005,


6063, 6060

Air + Water

14mt

9000 tn/yr

Farrel

25MN

6082, 6005, 6063,


6060

Air + Water

14mt

8000 tn/yr

SMS

24MN

6063, 6060

Air

9.6mt

7500 tn/yr

Breda

18MN

1000, 6063, 6060

Air

7mt

6500 tn/yr

Farrel

15MN

6063, 6060

Air

7mt

4000 tn/yr

SURFACE TREATMENT
Type

Description

Technical specifications

Powder coating

Environmentally friendly chrome free (Titanium based)


process, which allows:
*wide range of colours;
*aluminium surface protection;
*good wear and low friction coefficient;
*applying of protective foils on coated surfaces

Lmin = 3000 mm
Lmax = 7000 mm

Decoration

Process of surface treatment for wood imitation

Requirements:
*profile weight = max 2500 g/m;
*length:
L1 = 4800 mm
L2 = 5400 mm
L3 = 6000 mm

Anodizing

Used for corrosion protection, electrical isolation, improving of surface wearing, good decorative aspect and
preparation of surface for varnish coating

Lmax = 7500 mm
* anodizing thickness: from 10 to 20

EN 755
Aluminium and aluminium alloys.
Extruded rod/bar, tube and profiles;
EN 12020
Aluminium and aluminium alloys.
Extruded precision profiles in alloys EN
AW-6060 and EN AW-6063;
DIN 17611
Anodized products from aluminium and
aluminium alloys;
EN 22768
General tolerances. Tolerances for linear
and angular dimensions and Geometrical
tolerances for features without individual
tolerance indications (Applied to
fabrication).

Additional
processing
Precision cutting
4 SAWS (CNC)
Punching
4 eccentric presses
2 hydraulic presses
4 pneumatic presses
2 punching machines
CNC machining
Bending
Minimum radius of 450-600 mm
(depending on the profile cross section).
Thermal break assembly lines
Semi-finished and finished
parts assembly
Screw mounting, pressing, sticking
and labeling.

Aluminium
alloys

All profiles are produced according


to the European standard EN 573-3
from the following alloys:

EN AW6060
ISO AlMgSi

EN AW6063
ISO AlMg0.7Si

EN AW 1050 (Al 99.5)


EN AW 6060 (Al Mg Si)
EN AW 6063 (Al Mg 0.7 Si)
EN AW 6005 (Al Si Mg)
EN AW 6082 (Al Si 1 Mg Mn)

GENERAL PHYSICAL PROPERTIES


OF THE ALUMINIUM ALLOYS

Applications
Architectural elements for windows,
doors, partition walls. Interior furnishing,
lighting, stairs, grilles, meshes. Cooling
and heating surfaces, electronic modules,
electro motor housings. Flexible mounting
systems, special machinery parts. Floors of
trucks and trailers, pneumatic equipment,
railways, internal applications. Irrigation,
heating and cooling pipelines, office
furniture.

The 6000 series has good extrusion


properties and can be subjected to heat
treatment at extrusion temperature. This
treatment provides the alloys with medium
to high strength, a good corrosion resistance
even when used close to the sea, and also
allows the use of welding processes. A large
part of the extruded elements for loadbearing structures possess these properties.
They are used for load-bearing structures
both on land and in the sea.

Characteristic properties
Very good corrosion resistance. Good
welding properties. Appropriate for cold
forming category T4.
Medium-strength heat-treated alloy with
slightly lower resistance than that of 6005A.
Medium to strong material fatigue.
Commonly used alloy for highly-complex
cross-profiles.
Standardized quality of decorative
anodizing.

Applications
Architectural elements for windows, doors,
partition walls. Furnishing, frame systems,
lighting. Stairs, grids, etc. Cooling and
heating surfaces, electronic modules, and
electro-motor housings. Flexible mounting
systems, special machinery parts. Floors of
trucks and trailers, pneumatic equipment,
railways, internal applications. Irrigation.
Heating and cooling pipelines. Furniture,
office furniture. Heating fixtures and other
heating systems.

Characteristic properties
Very good corrosion resistance. Good
weldability. Good formability in cold
state, category T4. Average strength
heat-treated alloy with strength slightly
less than that of 6005A. Medium-strong
material fatigue. Commonly used alloy for
highly-complex cross-profiles. Standard
decorative elements

EN AW6005
ISO AISiMg(A)

EN AW6082
ISO AISi1MgMn

EN AW1050
ISO Al 99.5

Applications
Rail transport and flat bar profile systems
with complex cross-profiles (integrated
structures). Structured building projects,
pylons, platforms, pipelines. Applications
in the electrical and precision mechanical
industry. Extruded forms for different
purposes, when the required strength is
higher than that of 6060 and 6063. Masts
of sailboats. Furniture.

Applications
Heavy structures in wagons, frames of
heavy load trucks, shipbuilding, bridges,
military bridges, wheels, boilers. Machinery:
Platforms, flanges for instruments,
hydraulic systems, towers and pillars,
motor boats. Nuclear technologies. Masts
and beams for shipbuilding (especially
for river boats). Pipes for scaffolding
structures, frames for tents and halls,
conductors, probes. Riveting mechanisms.

Applications
Typical applications include chemical
and food handling equipment, as well as
containers for food, pharmaceuticals and
liquids. Alloy 1050 is used primarily for
electrical flat bars and conductors.

Characteristic properties
Very good corrosion resistance. Good
weldability. Medium to strong heat-treated
alloy with strength slightly exceeding that
of 6060 and 6063. High material strength.
Better extrusion properties than 6082 and
6061 for complex cross-profiles.

Characteristic properties
Very good corrosion resistance. Very good
weldability. Easy machine processing. Good
formability in cold state in category T4 after
stabilizing heat treatment. Heat-treated,
medium to high strength construction. Alloy
with strength higher than that of 6061.
Medium material fatigue. Not suitable for
complex cross-profiles.

Characteristic properties
This alloy offers the best corrosion
resistance of any alloy group and displays
excellent forming, welding, brazing
and finishing characteristics, but poor
machinability.
Excellent forming characteristics permit
these alloys to be easily impacted, cold
drawn, deep drawn and bent into various
configurations. These alloys can be
extruded as profiles, rod, bar and tubing.

General
applications

advertising

GENERAL ENGINEERING APPLICATIONS

electronics heat syncs

12

tubes bars

lighting

13

Building

architectural systems

stairs and scaffolding

mosquito nets

16

rolling shutters

17

TRANSPORTATION

Automotive

trucks

20

Bicycles

21

Energy

Radiators heat exchangers

24

photovoltaic Systems & Solar Thermal Systems

25

Furniture

28

furniture

29

Standard
Profiles

32

Standard Profiles

33

etem.com

Potrebbero piacerti anche