Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
OBJECTIVE
Seeking a Senior Mechanical Engineer or Project Management position.
SUMMARY OF SKILLS
Project Management.
Management of equipment packages.
Design of oil and gas production equipment.
Cost estimation.
Static and rotating equipment package preparation.
Project schedule development.
Technical evaluation of vendor proposals.
Writing of procedures and reports.
Interpretation of industry codes such as ASME and API.
Evaluation of equipment design for code and specification compliance.
Specifications and data sheets preparation.
Pipe sizing and wall thickness calculation.
Interpretation of pipe stress calculation results.
Material evaluation and selection.
P&ID development.
SUMMARY OF EXPERIENCE
More than 15 years of experience in engineering of offshore and onshore oil and gas production facilities including 1
year of experience with drilling and well completion projects. Management of Oil & Gas related projects. Performed
detailed engineering for oil and gas production facilities such as Spars, TLPs, FPSOs, and onshore gas compression
facilities.
Delivered major equipment including pressure vessels, power generators, chemical injection equipment, dehydration
equipment, utility equipment, heat exchangers, pumps and compressors.
Performed design, engineering and project management for projects on a global scale, including the Gulf of Mexico,
New Zealand, onshore United States, Argentina, Indonesia, Brazil, and onshore Nigeria.
PROFESSIONAL REGISTRATION
Engineering License (P.E.), Texas Board of Professional Engineers, Dec. 2013.
Project Management Certificate (PMP), PMI Houston, Texas; April 2012
Member, Project Management Institute; 2011
Member, ASME, 2011
WORK HISTORY
Freeman & Curiel Engineers LLP: Aug. 2015 Nov. 2016
SEAONE CARIBBEAN PROJECT
Title: Project Manager.
Provided project management services for the front end engineering design of compressed gas containment and
transportation systems. The project included the design and cost estimation of storage buildings, tanks, valve
manifolds and refrigeration systems with a total budget of $2.0 million.
Ramboll Oil and Gas U.S. Inc.: May 2014 August 2015
Excel Engineering Inc. June 2012 May 2014 (Acquired by Ramboll Oil and Gas U.S. Inc.)
Title: Project Engineer; Lead Mechanical Engineer.
Provided engineering services, including project/lead mechanical engineer, design and specification of mechanical
equipment, evaluation of supplier bids, selection and procurement of major mechanical equipment. Projects included
the following:
EAGLE FORD FIELDS BHP BILLITON EQUIPMENT UPGRADE AND MAINTENANCE PROJECT (At Ramboll)
Developed maintenance procedure (work packs) for equipment maintenance and upgrade projects.
PDVSA PETROURICA PROJECT (At Excel Engineering)
P&ID development, sizing of vessels, preparation of vessel and pump data sheets and design of pump suction and
discharge piping. Field production capacity: 50,000 BOPD and 4.0 MMSCFD of gas
NORSK HYDRO E&P; TELEMARK FEED PROJECT; GULF OF MEXICO (At Alliance)
Developed specifications and data sheets for equipment such as Firewater Pump, Flotation Cell Skid, Hypochlorite
Generator, Fuel Gas Skid, and Survival Craft. Performed firewater deluge calculations.
ANADARKO PETROLEUM; INTERSTATE CO2 PROJECT; OKLAHOMA (At Alliance)
Performed pressure vessel sizing calculations, assisted with PFD development, and generated stream tables from HYSIS
runs.
UNOCAL; GENDALO PRE-FEED PROJECT; OFFSHORE INDONESIA (At Alliance)
Performed sand handling and blanket gas studies and sized pressure vessels.
ENTERPRISE FIELD SERVICES; INDEPENDENT TRAIL PROJECT; GULF OF MEXICO (At Alliance)
Performed stress analysis using CEASAR II for a section of the pig launcher riser.
ELLAYESS Inc Alliance Engineering Contractor (December 2004 June 2005)
Title: Mechanical Engineer.
CHEVRON TEXACO; FRADE FEED FPSO; OFFSHORE BRAZIL (At ELLAYESS)
Specified utility equipment and developed specifications. Equipment included Wash Water Generator, Hypochlorite
Generator, Air Compressor Skid, Diesel Fuel Skid, and Nitrogen Generator Skid. Also updated equipment list, generated
data sheets, and performed pressure vessel sizing calculations.
J. Ray McDermott Engineering, LLC (Aug. 2001 Nov. 2004)
Title: Mechanical Engineer.
Provided mechanical engineering services, including design, specification, evaluation of supplier bids, selection and
procurement of major mechanical equipment. Projects included the following:
DOLPHIN ENERGY LIMITED; QATAR PROJECT PACKAGING; ONSHORE QATAR (At J. Ray McDermott)
Performed detailed design: worked as a package engineer for a variety of equipment such as Process Heaters, Liquid
Burners, and Hydrocarbon Filters.
DOMINION EXPLORATION & PRODUCTION, INC; DEVILS TOWER TRUSS SPAR; GULF OF MEXICO (At J. Ray McDermott)
Performed detailed design: worked as mechanical engineer in the fabrication yard to assist in the installation of
mechanical equipment on an offshore production platform, specified specialty items, performed the material handling
study and worked as commissioning mechanical engineer for systems and equipment startup.
MURPHY E&P COMPANY; FRONT RUNNER TRUSS SPAR; GULF OF MEXICO (At J. Ray McDermott)
Evaluated proposals and awarded contracts, assisted contractors with technical issues, negotiated with contractors to
resolve change orders and reduce cost, performed detailed design, ensured equipment was designed to specification
and industry standards, evaluated contractor performance against established project milestones, developed
specifications, and data sheets. Performed detailed design: worked as package engineer for variety of equipment such
as: Heat Exchangers, Pressure Vessels, Pumps, Production Manifold, Flotation Cell Skid, Water Makers, Chemical
Injection Skid, Air Compressor Skid, Filters, Fuel Supply Systems, Storage Tanks, Vapor Recovery Units, and assisted
with quality assurance, inspection, and procurement.
TOTAL FINA ELF; CARINA-ARIES FIELD DEVELOPMENT; OFFSHORE ARGENTINA (At J. Ray McDermott)
Performed platform material-handling studies and prepared documentation.
MURPHY E&P COMPANY; MEDUSA SPAR; GULF OF MEXICO (At J. Ray McDermott)
Performed detailed design: prepared material handling study and evaluated vendor proposals. Performed material
handling studies and prepared the specialty item specifications.
JRME INTELLIGENT FLOW SHEET INITIATIVE (At J. Ray McDermott)
Worked on forms and reports for the task force effort to link flow sheets to an Oracle database and automate the
design process. Assisted with database development.
COMPUTER EXPERTISE
Microsoft Office Suite
LANGUAGES
English (fluent)
RESIDENCY STATUS
U.S. Citizen
EDUCATION
Master of Engineering in Mechanical Engineering; Lamar University, Beaumont, Texas.
Bachelor of Engineering in Petroleum Engineering; University of Port Harcourt, Nigeria.
FIRMS
August 2015 November 2016
June 2012 August 2015
Jan 2010 June 2012
June 2005 Oct 2009
Dec 2004 June 2005
Aug 2001- Nov 2004
1997-2001
1995-1997