Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
DESIGN OF R.C.C.
CAPACITY-
G.S.R.
40.00 Kilolitres
AT - RWSS JHADOL.
DISTRICT - UDAIPUR.
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
4.800 metres
0.800 metres
RADIUS OF DOME(R1) =
4.000 metres
(t1) =
0.150 metres
4000 Newtons/sqm.
9800 N/cum.
25000 N/cum.
3750 N/sqm.
7750 N/sqm.
7750
0.1148 N/sqmm.
(COMP) SAFE
0.1033 N/sqmm.
(COMP) SAFE
0.2400 % =
1000
SPACING REQUIRED
=
360
SAY
360 sqmm.
140 mm. c/c.
130 mm. c/c.
800 mm.
EXTEND THE VERTICAL BARS OF THE WALL IN THE DOME FOR A DISTANCE
***************
800 mm.
THICKNESS OF DOME
0.150 mt.
17220 N/m.
13776 N/m.
33062 N.
254 sqmm.
314 sqmm.
254 O.K.
IF USING
Nos.
33062
33062 / (
mm.
DIA
250
250
mm. WIDE
STIRRUPS
0.1148 N/sqmm.
>
19529 sqmm.
150 mm.DEEP.
4.800 mt.
2.550 mt.
FREEBOARD
0.300 mt.
2.250 mt.
40.72 K.L.
46.15 K.L.
59976 N/m
PI/4 *
40.72
9800
4.800
36 mm.
200 mm.
59976
HOWEVER PROVIDE
461 sqmm./m.
1.50 N/sqmm.
6.77
200
0.4553
27307
210
480
480
100
0.60 H
200
0.6475
38834
299
480
480
100
0.80 H
200
0.5755
34516
266
480
480
100
1.00 H
200
0.3497
20974
161
480
480
8
100
================================================================================
HOOP FORCE CALCULATIONS ARE AS PER TABLE - 12 OF IS-3370-1967 PART - IV.
MAX. B.M. AT THE BASE AS PER TABLE 10 OF IS-3370-1967 PART 4 =
0.0171 *
9800 *
2.550 ^3
THICKNESS REQUIRED FROM BENDING MOMENT POINT OF VIEW =
( 6 *
2779 /
2.000 )^0.5
PERCENTAGE OF MIN. STEEL REQUIRED
2779000
2779 Nm/m.
91 mm.
O.K.
0.24 %
240 sqmm.
138 sqmm.
40)
209 mm c/c
434 sqmm.
503 sqmm.
O.K.
PI/4 * ( 8 ^2
38834 / (
0.4169 N/sqm.
SAFE
80.00 K-N/sqm.
27.05 K-N/sqm.
SAFE
be
kept
equal
to
In the
provide
For
portion
8
resisting
of
the
Nos
bending
240 sqmm.
wall (i.e.
at
the
0.500 m. depth.
*********************
&
0.900 m.
8 mm.dia
SCHEDULE - "G"
==============
Rates are based on Integrated PWD BSR Jan'2005.
40 K.L. - GSR
==============================================================================
S.NO.
PARTICULARS
QUANTITY
UNIT
RATE
AMOUNT
( Rs.)
( Rs.)
-----------------------------------------------------------------------------1. B-2/1.8
------Earthwork in excavation in
foundation trenches or drains
including dressing of sides and
ramming of bottoms,lift upto
1.50 Mt including taking out
excavated soil and depositing
and refilling of jhiri with
watering and ramming and
disposal of surplus excavated
soil as directed within a lead
of 50 Mt. All kinds of soil.
14.16
Cum.
38.00
538.08
2.
3.
4.
B-14/3.2.3
---------Providing & laying cement conc.
including curing,compaction etc.
complete in specified grade
excl. cost of centring & shuttering. All work upto plinth level
1:2:4 (1 cement : 2 course sand :
4 graded stone aggregate 20 mm)
1.85
Cum.
1530.00
2830.50
B-18/4.1.1
---------Providing & laying in position
specified grade of RCC incl.
curing, compaction, finishing with
rendering in cement sand mortar
1:3 (1 cement : 3 coarse sand
and making good the Joints excl.
the cost of centring and shuttering
and reinforcement. All work upto
plinth level 1 : 1 : 2
(1 cement : 1 coarse sand : 2
graded stone aggregate 20 mm.
nomonal size.
3.79
Cum.
2165.00
8205.35
B-18/4.2.1
---------Reinforced cement concrete work in
walls,pilasters,buttresses,plinth
and string courses,fillets, columns
pillars, piers etc upto floor three
level, incl. curing compaction,
finishing with rendering in cement
sand mortar 1:3 & making good the
joints exl. cent & shutt - 1:1:2
8.6
Cum.
2260.00
19436.00
7.
8.
9.
B-22/4.13.2
----------Providing and fabricating
steel reinforcement for
R.C.C. work including
cutting, bending,placing
in position and binding
comp. including cost of
binding wire) all comp.
upto floor three level
Cold twisted deformrd
bars (IS:1786)
719
Kg.
31.00
22289.00
3.52
Sqm.
53.00
186.56
B-20/4.12.1
----------Walls (any thickness) including
attached pillasters, buttresses
plinth & string courses.
85.69
Sqm.
64.00
5484.16
--do-B-21/4.12.5
----------Arches, domes, vaults
upto 6 Mtr. span.
20.11
Sqm.
130.00
2614.30
B-20/4.11
--------Centring & shuttering with
plywood or steel sheets including
strutting,propping,bracing bothways
and removal of formwork for foundations in basements rafts, footings,
strap beams, bases of columns, etc
upto plinth level.
Centring and shuttering with
plywood or steel sheets including struting,propping,bothways with wooden member and
removal of formwork for
superstructure upto 4.5 m.
height above plinth level
for :
etc.
54.74
Kg.
37.00
2025.38
12. B-94/9.31
--------Supplying & fixing fixed wire
gauge of 14 mesh x 24 gauge to the
metal frame of rolled section by
metal beading 20x3 mm with suitable
screw at not exceeding 150 mm
distance.
0.94
Sqm.
285.00
267.90
13. B-87/9.22.3
----------Providing and fixing 1 mm thick M.S.
sheet garrage door shutter with frame
of 40x40x6 mm angle iron 3 mm M.S.
gusset plates at the junctions and
corners including all fittings and
applying a coat of approved steel
primer. Using flats 30x6 mm for
diagonal braces and central cross
piece.
0.64
Sqm.
710.00
454.40
14. B-96/9.44
--------Providing & fixing MS round holding
bolts with nuts and washers complete
4.00
Kg.
30.00
120.00
- L.S.
8000.00