Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Purpose
This manual describes how to assign a certificate profile to a material or material/Customer
combination.
Scope
This manual limit to explain assignment of certificate profile only. Creating a certificate profile
and printing of certificates are explained separately
Overview
After creating a certificate profile, you should assign that to a material or material/Customer
combination. By this way, for the same material, you can have different types of certificate for
different customers.
However, you should have different Layouts to be defined by ABAP/4 for different profiles.
Event
Only when a new certificate style is required for a new material or for a new
material/customer combination.
Page 1 of 4
Initial Screen
Choose Material or Material /Customer as required. Depending upon this the next screen will vary as shown below:
Press Enter.
Page 2 of 4
Material
Press Enter.
Press Save.
Press Back.
Page 3 of 4
Material / Customer
Here you are assigning a profile for a Material/ Customer combination. This will aid in printing different types of
certificates depending on the Customer for the same material .
Press Enter.
Press Save.
Press Back.
Page 4 of 4