Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
5. To add a Suction nozzle on the Impeller, click on Impeller in the component area, and click on the
flange icon in the toolbar. A nozzle should be added to the components and attached to the Impeller
in the center. [You may change the nozzle size in the
Nozzle Details.]
6. Add a discharge nozzle, click on Impeller in the component area, and click on the flange icon in the
toolbar. In the component area, click on Nozzle Details and change size to 3-150-RF. Click on
Suction Side and change the box to No. The flange on the drawing will flip around.
7. You will have to flip the nozzle around to point upward and move it to the impeller. Give the actual
pump details, the important dimension is the relative position from the face of the suction flange to
the face of the discharge flange. For now, simply place it off-center on the top of the impeller. Use
the Distance / Nozzle Placement box to maneuver. You may view this as a solid (View/Visual
Syles/Conceptual